ADJUSTABLE LOUVRE SHUTTERS

PRODUCT MANUAL

Revision: November 2012

CREALCO HORIZON

crealco. H O R I Z O N

Disclaimer: The right to make alterations is reserved© 2012 Wispeco (Pty) Ltd, All Rights Reserved

INDEX

Legal Disclaimer 3Profile Identification 4Extruded Profile Identification 5Hardware Identification 6Window Cross Section 7Cross Section Detail – Closed 8Cross Section Detail – Half Open 9Wall Fixing Detail 10Outer Frame Component Assembly Detail 11Sash Frame Component Assembly Detail 12Louvre Mechanism Assembly Detail 13Machining Detail 14Sinkless Hinge Frame Attachment 15Setting Block Location 16

Disclaimer: The right to make alterations is reserved

PAGE 2© 2012 Wispeco (Pty) Ltd, All Rights Reserved

crealco. H O R I Z O N

This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,BEE Certificates and the Performance Certificates for the relevant system. The manual must also beused in conjunction with the design and cutting list from the latest version of StarFront.

LEGAL DISCLAIMERAll information, recommendations or advice contained in this documentationis given in good faith to the best of Wispeco’s knowledge and is based oncurrent procedures in effect.

Since the actual use of this documentation by the user is beyond the control ofWispeco, such use is within the exclusive responsibility of the user. Wispecocannot be held responsible for any loss incurred through incorrect or faulty useof this documentation.

Great care has been taken to ensure that the information provided is correct.Wispeco will accept no responsibility for any errors and/or omissions, which mayhave inadvertently occurred.

All mechanical joints must be sealed with a Wispeco approved joint sealer.

Laminated glass must not stand in water.

All drawings in the Wispeco Documentation are shown NOT to scale.

Wispeco cannot accept responsibility for the use of standard products sinceWispeco does not know where these products are being installed.

The use of anti-magnetic stainless steel screws and pop rivets is recommendedto reduce galvanic corrosion in harsh environments.

The hardware recommended in this documentation is suitable for use in mostatmospheric environments. When hardware is used in severe coastal environmentsthe manufacturer of the hardware must be consulted.

Fixing lugs on frames must be positioned as per the user manual and used inaccordance to the AAAMSA specifications. When profiles are screwed togetherthe screw centers must also be according to the user manual.

All glass used within Wispeco products must comply with SAGGA regulations.

All glazing above 10m from ground level must be signed off by a competent person(Glazing) in accordance with the national building regulations

By continuing to use this documentation you acknowledge that youunderstand and accept the legal disclaimer.

Disclaimer: The right to make alterations is reserved

PAGE 3© 2012 Wispeco (Pty) Ltd, All Rights Reserved

crealco. H O R I Z O N

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSPROFILE IDENTIFICATION

28.00 16.50

FRAME STANDARDW33021

FRAME CAPW33022

30.0032.00 30.00

STILE 32MMW56087

MIDRAIL 32MM

TOP/BTM RAIL 32MMW56085

72.45

ADJUSTABLE LOUVREW55474

58.00

TOP/BTM LOUVREW55469

20.00

ASTRAGAL TW32846

HORIZON SHUTLOCKING BARW32847

Disclaimer: The right to make alterations is reserved

PAGE 4© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSEXTRUDED PROFILE IDENTIFICATION

STILE 32MMW56087

MIDRAIL 32MMW56086

TOP/BTM RAIL 32MMW56085

ADJUSTABLE LOUVREW55474

TOP/BTM LOUVREW55469

ASTRAGAL 32MMW32846

FRAME STANDARDW33021

FRAME CAPW33022

Disclaimer: The right to make alterations is reserved

PAGE 5© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

HARDWARE IDENTIFICATION

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERS

4x10 COUNTERSUNKRIVETCSKR410

BUBBLE SEALWSG001E

LOUVRE MECHANISMABLM14

ALUFAB HINGESSINKLESS 100x40MMHRA1040

HORIZON ANGLE HINGE100x40MMHNG003HA

V-CATCHVC001P

8X20 COUNTERSUNKPOSI S/S SCREWSTCPS840

Disclaimer: The right to make alterations is reserved

PAGE 6© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSWINDOW CROSS SECTIONWITH MIDRAIL

A A

SECTION A - A

SECTION B - B

B

B

Disclaimer: The right to make alterations is reserved

PAGE 7© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSCROSS SECTION DETAILBI-FOLD -WITH MIDRAIL CLOSED

SECTION A - A

SECTION B-B

A

A

B B

Disclaimer: The right to make alterations is reserved

PAGE 8© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSCROSS SECTIONAL DETAILBI-FOLD WITH MIDRAIL - HALF OPEN

A A

SECTION A - A

Disclaimer: The right to make alterations is reserved

PAGE 9© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSWALL FIXING DETAIL

Bi-fold Louvre with Frame Detail

Bi-fold Louvre with Frameattached to wall

Bi-fold Louvre with Angle Hingeattached to wall

Disclaimer: The right to make alterations is reserved

PAGE 10© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSOUTER FRAME COMPONENTASSEMBLY DETAIL

W33021

W33022

W33021

W33022

Disclaimer: The right to make alterations is reserved

PAGE 11© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSSASH FRAME COMPONENTASSEMBLY DETAIL

W32846

W56087

W56085

W56086

W56085

Disclaimer: The right to make alterations is reserved

PAGE 12© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSLOUVRE MECHANISMASSEMBLY DETAIL

ABLM14

W55469

W55474

W55469

Disclaimer: The right to make alterations is reserved

PAGE 13© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSMACHINING DETAIL

CORNER CLEAT

Holes for HingesW33021

Mitre cut

W33021

Holes on Frame outer edgefor Corner Cleat

W33021

W33021

Disclaimer: The right to make alterations is reserved

PAGE 14© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.

CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSSINKLESS HINGEFRAME ATTACHMENT

W33021

HRA1040

Disclaimer: The right to make alterations is reserved

PAGE 15© 2012 Wispeco (Pty) Ltd, All Rights Reserved

Aluminium Profile StockistsEst. 1946

crealco.