Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R...

24
Crawler Crane LR 1130 LR 1002.03 EN

Transcript of Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R...

Page 1: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

Crawler Crane

LR 1130LR 1002.03

EN

Page 2: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

2 LR 1130 – 1002.04

Dimensions  Basic machine with undercarriage

Operating weight

The operating weight includes the basic machine with crawlers, 2 main winches 120 kN and 17 m main boom, consisting of A–frame, boom foot (7 m), boom head (10 m), 52.3 t basic counterweight, 20 t carbody­counterweight and 160 t hook block.

Total weight approx. 146.1 t

Remarks

1. The lifting capacities stated are valid for lifting operation only (corresponding with crane classification according to F.E.M. 1.001, crane group A1).

2. Crane standing on firm, horizontal ground.

3. The weight of the lifting device (hoist ropes, hook block, shackle etc.) must be deducted from the gross lifting capacity to obtain a net lifting value.

4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity.

5. For max. wind speed please refer to lift chart in operator‘s cab or manual.

6. Working radii are measured from centre of swing and under load.

7. The lifting capacities are valid for 360 degrees of swing.

8. Calculation of stability under load is based on DIN 15019 / part 2 / chart 1 and ISO 4305 Table 1 + 2, tipping angle 4°.

9. The structures are calculated according to F.E.M. 1.001 ­ 1998 (EN 13001­1; EN 13001­2).

Ground pressure

The actual ground pressure is calculated according to the configuration and position of the machine and displayed in the operator’s cab. Using the optional Liebherr Crane­Planner the actual ground pressure, amongst other parameters, can already be calculated and displayed in the planning stage.

Equipment

Main boom (No. 2017.xx) max. length 80.0 m High reach (No. 2017.xx and 1309.xx) 92.9 m Luffing jib (No. 1309.xx) max. length 78.5 m Max. combination main boom 47.0 m luffing jib 78.5 m Fixed jib (No. 0806.xx) 11 – 32 m Auxiliary jib 24 t (option 36 t)

7970

33556750

1250

29708580

195

4

1530

3640

13930

13601000

6350

6050

440

1345

3040

5310

R 5700

R 6530

Page 3: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 3

Transport dimensions and weights Basic machine and main boom (No. 2017.xx)

Basic machine

with A­frame, 2x 120 kN crane winches without boom foot, hoist ropes, basic counterweight and crawlers

Width 3000 mm

Weight 33400 kg

Weight of hoist rope (420 m) 3.428 kg/m

Boom section (No. 2017.21) 3 m

Width 2100 mm

Weight* incl. main boom pendants 570 kg

Weight* incl. main boom and luffing jib pendants 640 kg

Crawler 2x

Track pads (option 1200) 1000 mm

Width 1400 mm

Weight 16000 kg

Boom section (No. 2017.21) 6 m

Width 2100 mm

Weight* incl. main boom pendants 930 kg

Weight* incl. main boom and luffing jib pendants 1016 kg

Boom section (No. 2017.21) 12 m

Width 2100 mm

Weight* incl. main boom pendants 1655 kg

Weight* incl. main boom and luffing jib pendants 1870 kg

Boom head (No. 2017.21)

Width 2100 mm

Weight* incl. main boom pendants 3000 kg

*) Weights depend on the equipment installed

Boom transport option

(No. 2017.xx/1309.xx) 6/6 12/11.7 m

Length 6130 12130 mm

Weight* 1580 2830 kg

Transport option

3450

Option1330

3000

3220

974

14200

3135

6135

12135

1920

1920

1920

2830

10960

7970

1345

Page 4: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

4 LR 1130 – 1002.04

Transport dimensions and weights Luffing jib (No. 1309.xx)

Luffing jib head (No. 1309.22)

Width 1390 mm

Weight* 1125 kg

Luffing jib section (No. 1309.20) 3 m

Width 1390 mm

Weight* 305 kg

Luffing jib section (No. 1309.20) 6 m

Width 1390 mm

Weight* 510 kg

Luffing jib section (No. 1309.20) 11.7 m

Width 1390 mm

Weight* 945 kg

Luffing jib foot with A-frames (No. 1309.22)

Width 1700 mm

Weight* 4525 kg

L-boom section tapered (No. 2017/1309.20) 12 m

Width 2100 mm

Weight* 1060 kg

*) Including pendants

1950

6300

3140

1150

1150

6140

11800

1150

2600

8900

12130

1900

Fixed jib (No. 0806.xx)

Fixed jib head (No. 0806.16)

Width 950 mm

Weight* 445 kg

Fixed jib section (No. 0806.15) 6 m

Width 950 mm

Weight* 250 kg

Fixed jib section (No. 0806.15) 3 m

Width 950 mm

Weight* 145 kg

*) Including pendants

Fixed jib foot with A-frame (No. 0806.16)

Width 2200 mm

Weight* 1115 kg

1165

6950

820

6140

3140

820

980

6050

Page 5: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 5

Transport dimensions and weights Counterweights

Mid fall (option)

Mid fall section (No. 1309.32) 0.35 m

Width 700 mm

Weight 270 kg

1400

700 1500

12.5 t single hook

Width 400 mm

Weight 600 kg

160 t hook block – 7 sheaves

Width 640 760 880 mm

Weight 1500 2250 3000 kg

80 t hook block – 3 sheaves

Width 360 460 560 mm

Weight 1000 1500 2000 kg

100 t hook block – 5 sheaves

Width 540 670 770 mm

Weight 1300 1800 2300 kg

40 t hook block – 1 sheave

Width 300 400 500 mm

Weight 700 1100 1500 kg

Hooks

1800

770

2100

770

1800

770

800

1600

1100

400

Counterweight 1x

Width 1360 mm

Weight 12000 kg

Counterweight 8x

Width 1350 mm

Weight 5000 kg

Carbody counterweight 2x

Width 1435 mm

Weight 10000 kg

6050

640

480

1905

310

4230

Page 6: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

6 LR 1130 – 1002.04

Boom combinations

Main boom No. 2017.xx 80 m Max. combination 92.6 m 92.9 m

Main boom No. 2017.xx 40.0 m Tapered No. 2017/1309.xx 12.0 m Luffing jib No. 1309.xx 40.6 m

52.0 m 12.0 m 28.9 m

Max. combination 97 m

Main boom No. 2017.xx 65 m Fixed jib No. 0806.xx 32 m

Main boom No. 2017.xx 68 m Fixed jib No. 0806.xx 29 m

Max. combination 125.5 m

Main boom No. 2017.xx 47.0 m Luffing jib No. 1309.xx 78.5 m

Main boom No. 2017.xx 53.0 m Luffing jib No. 1309.xx 49.1 m

7.0 m (23 ft)No. 2017.24

6.0 m (20 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

5.5 m (18 ft)No. 1309.22

10.0 m (33 ft)No. 2017.21

6.0 m (20 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

5.5 m (18 ft)No. 1309.22

11.7 m (38 ft)No. 1309.20

3.0 m (10 ft)No. 1309.20

12.0 m (40 ft)No. 2017.21

Mid fall 0.35 m (1.1 ft)No. 1309.32

7.0 m (23 ft)No. 2017.24

10.0 m (33 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

3.0 m (10 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

7.0 m (23 ft)No. 2017.24

12.0 m (40 ft)

12.0 m (40 ft)

No. 2017.21

12.0 m (40 ft)No. 2017.21

6.0 m (20 ft)No. 2017.21

3.0 m (10 ft)No. 2017.21

11.7 m (38 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

11.7 m (38 ft)No. 1309.20

5.5 m (18 ft)No. 1309.22

TaperedNo. 2017/1309.22

7.0 m (23 ft)No. 2017.24

12.0 m (40 ft)No. 2017.21

10.0 m (33 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

12.0 m (40 ft)No. 2017.21

6.0 m (20 ft)No. 0806.15

6.0 m (20 ft)No. 0806.15

5.5 m (18 ft)No. 0806.16

6.0 m (20 ft)No. 0806.15

3.0 m (10 ft)No. 0806.15

5.5 m (18 ft)No. 0806.16

Page 7: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 7

Technical description

Engine

Power rating according to ISO 9249, 230 kW (308 hp) at 1700 rpm Engine type Liebherr D 944 A7­04 Fuel tank 790 l capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA/CARB Tier 4f and 97/68 EC Stage IV.

Hydraulic system

A double axial displacement pump supplies the open loop hydraulic system, allowing all functions to be operated simultaneously. To minimize peak pressure an automatic working pressure cut–off is integrated in the pump. All filters are electronically monitored. The use of synthetic environmentally friendly (biodegradable) oils is possible. Working pressure max. 350 bar Oil tank capacity 650 l

Luffing jib winch

Line pull max. 105 kN Rope diameter 20 mm Jib luffing 46 sec. from 15° to 78°

Boom winch

Line pull max. 217 kN Rope diameter 24 mm Boom up 96 sec. from 15° to 86°

Crawlers

Propulsion through axial piston motor, hydraulically released spring loaded multi–disc brake, crawler tracks, hydraulic chain tensioning device. Track pads 1000 mm (Option: 1200 mm) Drive speed 0 – 2.1 km/h

Swing

Consists of rollerbearing with external teeth, swing drive with fixed axial piston hydraulic motor, spring loaded and hydraulically released multi–disc holding brake, planetary gearbox and pinion.Both swing modes are possible – speed control or free swing.A multi–disc holding brake acts automatically at zero swing motion. Swing speed from 0 – 3 rpm continuously variable.

Control

The heart of the hydraulic crawler cranes is the Liebherr control system which has been developed and manufactured in­house. It includes all control and monitoring functions and is designed to withstand extreme environmental conditions and heavy duty construction tasks. Complete machine operating data as well as warning signals and irregularities are clearly displayed on the high resolution monitor in the operator‘s cab in the required language.The electro­hydraulic proportional control allows several movements to be performed simultaneously. This ensures that all categories of loads can be positioned with utmost precision.

Option:GSM/GPRS telematics module

Main winches

Line pull (7th layer) 120 kNRope diameter 26 mmDrum diameter 580 mmRope speed 0 – 136 m/minRope capacity in 7 layers 489 mThe winches are outstanding in their compact design and easy assembly.Propulsion is via a planetary gearbox in an oil bath.Load support by the hydraulic system; additional safety factor provided by a spring loaded, multi–disc holding brake. The main winches use pressure controlled, variable flow hydraulic motors. This system features sensors that automatically adjust oil flow to provide max. winch speed depending on load. Option – winch with free­fall system:Clutch and braking functions on the free­fall system are provided by a compact designed, low wear and maintenance­free multi–disc brake.

Noise emission

Noise emissions correspond with 2000/14/EC directive. Guaranteed sound pressure level LPA in the cabin ≤ 72.5 dB(A)Guaranteed sound power level LWA ≤ 105 dB(A) Vibration transmitted to the hand­arm system of the machine operator < 2.5 m/s2

Vibration transmitted to the whole body of the machine operator < 0.5 m/s2

Page 8: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

8 LR 1130 – 1002.04

Self assembly system

Assembly of boom

Unloading and assembly of carbody counterweight

Unloading and assembly of crawlers

Unloading and assembly of counterweight

Unloading of basic machine

Unloading and assembly of boom

Page 9: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 9

Erecting of main boom to working position

Reeving of hoist and luffing jib ropes

Erecting of main boom and luffing jib Working position

Page 10: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

10 LR 1130 – 1002.04

812 4162024283236404448525660646872 0 m0

4

8

16

20

12

24

28

32

36

40

44

48

56

60

52

64

68

72

76

80

84

88

92m

0 ft4060 2080120140 100160180200220

0

40

60

20

80

100

120

140

160

180

200

220

240

260

280

300ft

23 m

20 m

17 m

53 m

50 m

47 m

44 m

41 m

38 m

71 m

68 m

65 m

80 m

77 m

74 m

62 m

59 m

56 m

35 m

32 m

29 m

26 m

86°80°

70°

60°

50°

40°

30°

20°

15°

2000

Main boom 86° – 15° (No. 2017.xx) 52.3 t counterweight and 20 t carbody counterweight

The maximum capacity of the auxiliary jib is 24 t. The corresponding load chart is programmed in the LMI system.

Main boom configuration (Table 1 – No. 2017.xx)

Configuration for boom lengths between 17 m and 80 m

Length Amount of boom extensions

Boom foot 7 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Boom insert 3 m 1 1 1 1 1 1 1 1 1 1 1

Boom insert 6 m 1 1 1 1 1 1 1 1 1 1

Boom insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5

Boom head 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Boom length (m) 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 74 77 80

Auxiliary jib applicable

Auxiliary jib 24 t

Page 11: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 11

Lift chart for main boom (No. 2017.xx)

Capacities in metric tonnes for boom lengths (17 m - 80 m) with 120 kN winchesBoom length in (m)

Radius 17 20 26 32 38 44 50 56 62 68 71 77 80 Radius(m) t t t t t t t t t t t t t t t t t t t t t t t t (m)

3.4 137.2 137.2 3.4

4 137.2 137.2 133.4 133.4 4

5 116.5 116.5 114.2 114.2 107.7 107.7 97.3 97.3 79.9 79.9 5

6 98.6 98.6 97.4 97.4 92.5 92.5 88.0 88.0 75.0 75.0 62.0 62.0 52.7 52.7 6

7 85.7 85.7 83.6 83.6 81.2 81.2 76.5 76.5 69.2 69.2 56.9 56.9 50.3 50.3 44.9 44.9 36.7 36.7 29.1 29.1 7

8 75.0 75.0 74.2 74.2 71.2 71.2 67.7 68.4 62.5 62.5 53.0 53.0 47.5 47.5 42.9 42.9 35.6 35.6 28.9 28.9 26.5 26.5 21.8 18.9 8

9 66.8 66.8 66.0 66.0 62.9 63.6 59.4 61.3 56.1 57.6 49.1 49.1 44.7 44.7 41.5 41.5 34.3 34.3 27.7 27.7 25.5 25.5 21.4 18.8 9

10 58.0 60.5 58.1 59.5 55.7 57.8 52.8 55.3 50.1 52.8 46.2 46.2 42.0 42.0 39.5 39.5 33.2 33.2 26.7 26.7 24.6 24.6 20.6 18.0 10

12 44.7 50.3 44.7 49.9 44.7 48.1 43.0 46.7 41.1 44.2 39.2 40.2 37.5 37.9 35.8 36.4 30.6 30.6 24.7 24.7 22.9 22.9 19.4 16.9 12

14 36.1 41.3 36.1 41.4 36.1 41.3 36.0 39.8 34.6 38.3 33.2 35.2 31.7 32.9 30.4 32.6 28.8 28.8 23.1 23.1 21.3 21.3 18.1 15.6 14

16 30.0 34.5 30.1 34.6 30.0 34.5 29.9 34.4 29.7 33.4 28.5 31.4 27.4 29.1 26.2 28.4 25.1 25.7 21.6 21.6 20.1 20.1 17.2 14.7 16

18 12.1 12.1 25.6 29.5 25.6 29.5 25.5 29.4 25.3 29.2 24.9 27.9 23.9 26.2 23.0 25.3 22.0 23.2 19.9 19.9 18.6 18.6 16.2 13.8 18

20 22.1 25.6 22.2 25.6 22.1 25.5 21.8 25.3 21.6 25.1 21.1 23.6 20.3 22.8 19.4 21.2 18.6 18.6 17.4 17.4 15.2 12.9 20

22 19.4 22.5 19.3 22.4 19.1 22.2 18.9 22.0 18.7 21.5 18.1 20.5 17.3 19.3 16.5 17.5 16.1 16.4 14.3 12.0 22

24 17.2 20.0 17.1 19.9 16.9 19.7 16.7 19.5 16.4 19.2 16.2 18.7 15.4 17.6 14.8 16.1 14.4 15.4 13.6 11.4 24

26 15.3 17.9 15.3 17.8 15.1 17.6 14.9 17.4 14.6 17.2 14.4 16.9 13.9 16.1 13.2 14.8 12.9 14.2 12.8 10.8 26

28 13.7 16.1 13.5 15.9 13.3 15.7 13.1 15.4 12.8 15.2 12.5 14.8 11.9 13.6 11.5 13.1 11.9 10.2 28

30 12.4 14.6 12.2 14.4 12.0 14.2 11.8 13.9 11.5 13.7 11.3 13.4 10.7 12.6 10.4 12.2 11.1 9.6 30

32 11.3 13.2 11.1 13.1 10.9 12.9 10.6 12.6 10.4 12.4 10.1 12.1 9.7 11.8 9.4 11.4 10.4 9.1 32

34 10.1 12.0 9.9 11.8 9.6 11.5 9.4 11.2 9.1 10.9 8.8 10.7 8.5 10.5 9.8 8.7 34

36 9.2 11.0 9.0 10.8 8.8 10.5 8.5 10.3 8.2 9.9 7.9 9.7 7.7 9.5 9.0 8.3 36

38 8.4 10.1 8.2 9.9 8.0 9.7 7.7 9.4 7.4 9.1 7.2 8.8 7.0 8.6 8.2 7.8 38

40 7.5 9.1 7.3 8.9 7.0 8.6 6.7 8.3 6.5 8.0 6.3 7.8 7.4 7.1 40

42 6.9 8.4 6.6 8.2 6.4 7.9 6.1 7.6 5.8 7.3 5.7 7.1 6.8 6.5 42

44 6.3 7.7 6.1 7.5 5.8 7.3 5.5 7.0 5.3 6.7 5.1 6.5 6.2 5.9 44

46 5.5 6.9 5.3 6.7 5.0 6.4 4.7 6.1 4.6 6.0 5.6 5.4 46

48 5.1 6.4 4.8 6.1 4.5 5.8 4.3 5.6 4.1 5.4 5.1 4.9 48

50 4.6 5.9 4.4 5.6 4.1 5.4 3.8 5.1 3.7 4.9 4.6 4.4 50

55 3.4 4.6 3.1 4.3 2.9 4.0 2.7 3.9 3.6 3.4 55

60 2.3 3.4 2.1 3.1 3.0 2.7 2.5 60

65 2.4 2.2 65TLT 10576238 ­ M188886 Offiziell

Above load charts are for reference only. For actual lift duty and complete chart with all available configurations please refer to load chart in operator’s cab or manual.

Counterweight and 20 t carbody counterweight 42.3 t 52.3 t

Page 12: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

12 LR 1130 – 1002.04

L-boom high reach with 40 m main boom (No. 2017/1309.xx) Working range 86° – 15°

Configuration for L-boom lengths between 60.5 m and 92.6 m (main boom length 40 m)Length Amount of boom and luffing jib extensions

Boom foot 7.0 m 1 1 1 1 1 1 1 1 1 1 1 1Boom insert 3.0 m 1 1 1 1 1 1 1 1 1 1 1 1Boom insert 6.0 m 1 1 1 1 1 1 1 1 1 1 1 1Boom insert 12.0 m 2 2 2 2 2 2 2 2 2 2 2 2Tapered 12.0 m 1 1 1 1 1 1 1 1 1 1 1 1

Luffing insert 3.0 m 1 1 1 1 1 1Luffing insert 6.0 m 1 1 1 1 1 1Luffing insert 11.7 m 1 1 1 1 2 2 2 2 3Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1Max. L – boom length (m) 60.5 63.5 66.5 69.2 72.2 75.2 78.2 80.9 83.9 86.9 89.9 92.6

812 41620242832364044485256606468727680 0 m0

4

8

16

20

12

24

28

32

36

40

44

48

56

60

52

64

68

72

76

80

84

88

92

96

100m

0 ft4060 2080120140 100160180200220240260

0

40

60

20

80

100

120

140

160

180

200

220

240

260

280

300

320

ft

86°80°

70°

60°

50°

40°

30°

20°

15°

60.5 m

89.9 m92.6 m

86.9 m

83.9 m

80.9 m

78.2 m

75.2 m

72.2 m

69.2 m

66.5 m

63.5 m

Page 13: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 13

Capacities in metric tonnes for boom lengths (60.5 m - 92.6 m) with 120 kN winchesBoom length in (m)

Radius 60.5 72.2 80.9 89.9 92.6 Radius(m) t t t t t t t t t t t t t t (m)

6 40.0 40.0 40.0 6

7 39.5 39.5 39.5 21.9 21.9 21.9 7

8 37.8 37.8 37.8 21.4 21.4 21.4 13.4 13.4 13.4 9.8 8

9 35.8 35.8 35.8 20.7 20.7 20.7 12.8 12.8 12.8 9.6 8.3 8.3 7.3 7.3 9

10 33.7 33.7 33.7 20.0 20.0 20.0 12.3 12.3 12.3 9.4 8.0 8.0 7.0 7.0 10

12 30.1 30.1 30.1 18.7 18.7 18.7 11.4 11.4 11.4 8.8 7.6 7.6 6.6 6.6 12

14 25.8 25.8 25.8 17.6 17.6 17.6 10.6 10.6 10.6 8.2 7.1 7.1 6.2 6.2 14

16 22.7 22.7 22.7 16.5 16.5 16.5 9.9 9.9 9.9 7.7 6.7 6.7 5.9 5.9 16

18 20.0 20.0 20.0 15.7 15.7 15.7 9.3 9.3 9.3 7.2 6.3 6.3 5.5 5.5 18

20 17.8 18.2 18.2 14.7 14.7 14.7 8.8 8.8 8.8 6.8 5.9 5.9 5.2 5.2 20

22 15.9 16.8 16.8 13.9 13.9 13.9 8.2 8.2 8.2 6.4 5.6 5.6 5.0 5.0 22

24 14.3 15.8 15.8 13.2 13.2 13.2 7.8 7.8 7.8 6.1 5.3 5.3 4.7 4.7 24

26 12.9 14.7 14.7 12.2 12.5 12.5 7.4 7.4 7.4 5.8 5.1 5.1 4.5 4.5 26

28 11.7 13.5 13.5 11.0 11.9 11.9 7.0 7.0 7.0 5.5 4.9 4.9 4.3 4.3 28

30 10.5 12.5 12.5 10.1 11.3 11.3 6.5 6.5 6.5 5.1 4.6 4.6 4.0 4.0 30

32 9.5 11.5 11.6 9.2 10.5 10.5 6.2 6.2 6.2 4.8 4.3 4.3 3.8 3.8 32

34 8.7 10.5 10.8 8.4 9.7 9.7 6.0 6.0 6.0 4.5 4.0 4.0 3.5 3.5 34

36 7.9 9.6 10.0 7.7 9.1 9.1 5.7 5.7 5.7 4.3 3.8 3.8 3.3 3.3 36

38 7.2 8.9 9.4 7.0 8.6 8.6 5.5 5.5 5.5 4.1 3.7 3.7 3.2 3.2 38

40 6.6 8.2 8.8 6.4 8.0 8.0 5.3 5.3 5.3 4.0 3.5 3.5 3.0 3.0 40

42 6.1 7.6 8.2 5.9 7.4 7.4 5.2 5.2 5.2 3.8 3.4 3.4 2.9 2.9 42

44 5.6 7.0 7.7 5.4 6.8 7.0 5.0 5.0 5.0 3.7 3.3 3.3 2.8 2.8 44

46 5.1 6.5 7.3 5.0 6.3 6.6 4.7 4.9 4.9 3.6 3.2 3.2 2.8 2.8 46

48 4.7 6.0 6.9 4.5 5.8 6.2 4.4 4.7 4.7 3.5 3.1 3.1 2.7 2.7 48

50 4.3 5.6 6.4 4.2 5.4 5.8 4.0 4.6 4.6 3.4 3.0 3.0 2.6 2.6 50

55 3.5 4.7 5.5 3.4 4.5 5.0 3.2 4.1 4.1 3.0 2.8 2.8 2.4 2.4 55

60 2.8 3.9 4.0 2.7 3.7 4.3 2.5 3.5 3.7 2.4 2.6 2.6 2.3 2.3 60

65 2.1 3.1 3.7 2.9 3.2 2.5 2.5 2.1 2.1 65

70 2.5 3.1 2.3 2.6 2.1 2.3 70

75 2.2 75TLT 10576238 ­ M188886 Offiziell

Above load charts are for reference only. For actual lift duty and complete chart with all available configurations please refer to load chart in operator’s cab or manual.

Lift chart for L-boom high reachCounterweight and 20 t carbody counterweight 32.3 t 42.3 t 52.3 t

Page 14: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

14 LR 1130 – 1002.04

Configuration for L-boom lengths between 72.5 m and 92.9 m (main boom length 52 m)Length Amount of boom and luffing jib extensions

Boom foot 7.0 m 1 1 1 1 1 1 1 1Boom insert 3.0 m 1 1 1 1 1 1 1 1Boom insert 6.0 m 1 1 1 1 1 1 1 1Boom insert 12.0 m 3 3 3 3 3 3 3 3Tapered 12.0 m 1 1 1 1 1 1 1 1

Luffing insert 3.0 m 1 1 1 1Luffing insert 6.0 m 1 1 1 1Luffing insert 11.7 m 1 1 1 1 2Luffing jib head 5.5 m 1 1 1 1 1 1 1 1Max. L – boom length (m) 72.5 75.5 78.5 81.2 84.2 87.2 90.2 92.9

L-boom high reach with 52 m main boom (No. 2017/1309.xx) Working range 86° – 15°

812 41620242832364044485256606468727680 0 m0

4

8

16

20

12

24

28

32

36

40

44

48

56

60

52

64

68

72

76

80

84

88

92

96

100m

0 ft4060 2080120140 100160180200220240260

0

40

60

20

80

100

120

140

160

180

200

220

240

260

280

300

320

ft

72.5 m

92.9 m

90.2 m

87.2 m

84.2 m

81.2 m

78.5 m

75.5 m

86°80°

70°

60°

50°

40°

30°

20°

15°

Page 15: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 15

Capacities in metric tonnes for boom lengths (72.5 m - 92.9 m) with 120 kN winchesBoom length in (m)

Radius 72.5 78.5 84.2 90.2 92.9 Radius

(m) t t t t t t t t t t t t t (m)

6.9 26.5 26.5 26.5 6.9

7 26.5 26.5 26.5 7

8 26.1 26.1 26.1 20.4 20.4 20.4 16.0 16.0 16.0 8

9 25.3 25.3 25.3 20.1 20.1 20.1 15.8 15.8 15.8 11.9 11.9 10.1 10.1 9

10 24.5 24.5 24.5 19.7 19.7 19.7 15.5 15.5 15.5 11.7 11.7 9.8 9.8 10

12 22.9 22.9 22.9 18.9 18.9 18.9 14.6 14.6 14.6 11.1 11.1 9.1 9.1 12

14 21.5 21.5 21.5 17.8 17.8 17.8 13.8 13.8 13.8 10.5 10.5 8.6 8.6 14

16 19.2 19.2 19.2 16.7 16.7 16.7 13.1 13.1 13.1 10.0 10.0 8.0 8.0 16

18 17.7 17.7 17.7 15.6 15.6 15.6 12.4 12.4 12.4 9.4 9.4 7.6 7.6 18

20 15.6 15.6 15.6 14.5 14.5 14.5 11.8 11.8 11.8 8.9 8.9 7.1 7.1 20

22 14.1 14.1 14.1 13.1 13.1 13.1 10.9 10.9 10.9 8.6 8.6 6.8 6.8 22

24 13.0 13.1 13.1 12.0 12.0 12.0 10.2 10.2 10.2 8.2 8.2 6.5 6.5 24

26 11.7 12.2 12.2 11.2 11.2 11.2 9.6 9.6 9.6 7.9 7.9 6.2 6.2 26

28 10.5 11.5 11.5 10.1 10.5 10.5 9.1 9.1 9.1 7.6 7.6 5.9 5.9 28

30 9.5 11.0 11.0 9.1 10.0 10.0 8.7 8.7 8.7 7.3 7.3 5.7 5.7 30

32 8.6 10.1 10.1 8.3 9.6 9.6 7.9 8.4 8.4 6.9 6.9 5.3 5.3 32

34 7.9 9.3 9.3 7.5 8.8 8.8 7.2 8.1 8.1 6.6 6.6 5.0 5.0 34

36 7.2 8.7 8.7 6.9 8.1 8.1 6.6 7.5 7.5 6.4 6.4 4.8 4.8 36

38 6.6 8.1 8.1 6.3 7.6 7.6 6.0 6.9 6.9 6.1 6.1 4.6 4.6 38

40 6.0 7.5 7.5 5.7 7.1 7.1 5.5 6.4 6.4 5.7 5.7 4.5 4.5 40

42 5.5 7.0 7.0 5.2 6.6 6.6 5.0 6.0 6.0 5.4 5.4 4.3 4.3 42

44 5.0 6.4 6.6 4.8 6.2 6.2 4.6 5.6 5.6 5.1 5.1 4.2 4.2 44

46 4.5 5.9 6.2 4.4 5.7 5.7 4.2 5.2 5.2 4.9 4.9 4.1 4.1 46

48 4.1 5.4 5.8 4.0 5.3 5.4 3.8 4.8 4.8 4.6 4.6 4.0 4.0 48

50 3.8 5.0 5.4 3.7 4.9 5.1 3.5 4.5 4.5 4.2 4.2 3.7 3.7 50

55 3.0 4.1 4.6 2.8 4.0 4.2 2.8 3.8 3.8 3.5 3.5 3.3 3.3 55

60 2.3 3.3 3.9 2.2 3.2 3.6 2.1 3.1 3.2 2.9 2.9 2.9 2.9 60

65 2.7 3.3 2.5 3.0 2.4 2.7 2.3 2.3 2.2 2.2 65

70 2.1 2.7 2.5 2.1 70

75 2.0 75TLT 10576238 ­ M188886 Offiziell

Above load charts are for reference only. For actual lift duty and complete chart with all available configurations please refer to load chart in operator’s cab or manual.

Lift chart for L-boom high reachCounterweight and 20 t carbody counterweight 32.3 t 42.3 t 52.3 t

Page 16: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

16 LR 1130 – 1002.04

Working range - luffing jib 78° - 15° (No. 1309.xx) Main boom 88° – 45°

Boom configuration for main boom lengths (23 m – 53 m) (see table 1 on page 10) Jib configuration for jib lengths (22.7 m – 78.5 m)

Length Amount of luffing jib extensions

Luffing jib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib insert 3.0 m 1 1 1 1 1 1 1 1 1 1

Luffing jib insert 6.0 m 1 1 1 1 1 1 1 1 1 1

Luffing jib insert 11.7 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5

Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib length (m) 22.7 25.7 28.7 31.7 34.4 37.4 40.4 43.4 46.1 49.1 52.1 55.1 57.8 60.8 63.8 66.8 69.5 72.5 75.5 78.5

812 4162024283236404448525660646872768088 84 0 m04

8

16

20

12

24

28

32

36

40

44

48

56

60

52

64

68

72

76

80

84

88

92

96

100

104

108

112

116

120

124

128

m

0 ft4060 2080120140 100160180200220240260280

0

40

60

20

80

100

120

140

160

180

200

220

240

260

280

300

320

340

360

380

400

420

ft

45°

65°75° 83° 88°

23 m

53 m

50 m

47 m

44 m

41 m

38 m

35 m

32 m

29 m

26 m

60°

50°

40°

30°

20°

15°

73°

25.7

m22

.7 m

78.5 m

75.5 m

72.5 m

69.5 m

66.8 m63

.8 m

60.8

m57

.8 m

55.1

m52

.1 m

49.1

m46

.1 m

43.4

m40

.4 m

37.4

m34

.4 m

31.7

m28

.7 m

Page 17: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 17

Lift chart - luffing jib (No. 1309.xx) Main boom 88° TLT 10576238 M188886 Offiziell

Capacities in metric tonnes with luffing jib (No. 1309.xx), 52.3 t counterweight + 20 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 23 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t8.2 43.310 38.5 33.811 35.5 31.9 26.312 33.2 29.9 25.6 20.314 29.2 26.4 23.5 19.5 13.317 24.2 22.3 20.1 17.7 12.4 8.418 23.0 21.1 19.1 17.2 12.1 8.2 5.820 20.6 19.1 17.5 15.7 11.5 7.9 5.6 3.622 18.8 17.6 16.0 14.6 11.0 7.5 5.4 3.524 17.2 16.2 14.7 13.6 10.4 7.3 5.2 3.330 13.1 12.0 11.4 9.2 6.7 4.8 2.936 10.3 9.9 8.2 6.2 4.5 2.642 7.9 7.1 5.9 4.2 2.450 5.6 4.9 3.8 2.155 4.4 3.6 2.060 3.8 3.4

Main boom 32 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t8.5 36.110 33.6 28.811 31.3 27.5 23.213 27.7 24.6 21.8 17.815 24.8 22.2 19.8 17.0 12.217 22.2 20.2 18.2 15.7 11.7 7.919 20.1 18.2 16.7 14.6 11.1 7.6 5.522 17.0 15.9 14.6 13.0 10.4 7.2 5.2 3.324 15.4 14.3 13.3 12.1 9.9 6.9 5.0 3.228 12.0 11.4 10.5 9.1 6.6 4.7 2.930 11.2 10.5 9.9 8.6 6.4 4.6 2.836 8.7 7.9 7.5 5.9 4.3 2.542 6.6 6.1 5.5 4.0 2.350 4.9 4.2 3.5 2.160 3.1 2.665 2.2

Main boom 38 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t8.8 31.510 29.8 25.412 26.5 23.5 20.513 24.8 22.1 19.6 16.415 22.3 20.0 17.9 15.4 11.417 19.9 18.2 16.5 14.2 10.9 7.519 18.0 16.5 15.1 13.2 10.4 7.2 5.222 15.2 14.4 13.4 11.7 9.7 6.8 5.0 3.224 14.0 13.2 12.3 10.9 9.2 6.6 4.8 3.128 11.3 10.6 9.6 8.4 6.3 4.6 2.830 10.7 9.9 9.1 8.0 6.1 4.4 2.734 8.8 7.9 7.3 5.8 4.2 2.536 8.3 7.4 6.9 5.5 4.1 2.542 6.3 5.7 5.0 3.8 2.350 4.6 3.8 3.3 2.060 2.9 2.3

Main boom 47 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t9.1 25.011 22.7 20.112 21.4 19.0 16.713 20.2 18.0 15.9 13.615 18.1 16.3 14.4 12.7 10.018 15.4 14.3 12.5 11.2 9.3 6.619 14.8 13.6 11.9 10.8 8.9 6.5 4.822 13.2 11.9 10.6 9.6 8.2 6.1 4.6 3.026 9.8 10.5 9.3 8.5 7.3 5.6 4.3 2.832 7.1 8.0 7.3 6.3 5.0 3.9 2.536 7.2 6.6 5.8 4.6 3.7 2.342 5.7 4.9 4.0 3.2 2.144 4.7 3.9 3.0 2.050 4.1 3.2 2.655 2.8 2.260 2.4

Main boom 50 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5(m) t t t t t t t9.2 22.811 20.9 18.412 19.6 17.4 15.313 18.6 16.4 14.6 12.515 16.7 14.8 13.2 11.7 9.318 14.4 12.8 11.5 10.4 8.7 6.319 13.8 12.1 11.0 10.0 8.3 6.2 4.620 13.3 11.5 10.6 9.6 8.0 6.0 4.622 12.4 10.6 9.8 8.8 7.5 5.7 4.424 11.7 10.0 9.1 8.3 7.1 5.4 4.226 8.9 9.5 8.6 7.8 6.7 5.2 4.032 7.0 7.6 6.8 5.8 4.5 3.636 6.9 6.3 5.4 4.2 3.342 5.5 4.6 3.7 2.950 3.9 2.9 2.460 2.2

Main boom 53 mJib length in (m)

Radius 22.7 25.7 28.7 31.7 34.4 37.4 40.4 49.1(m) t t t t t t t t9.3 20.810 20.4 18.611 19.2 17.8 16.912 18.1 16.9 15.9 15.0 14.013 17.1 15.9 15.1 14.2 13.4 12.5 11.415 15.5 14.2 13.6 12.9 12.2 11.5 10.8 8.718 13.3 12.3 11.8 11.1 10.7 10.1 9.6 8.020 12.3 11.2 10.7 10.3 9.8 9.2 8.8 7.426 10.1 9.3 8.8 8.4 8.0 7.6 7.2 6.228 8.8 8.4 8.0 7.6 7.2 6.8 5.932 6.5 7.4 7.0 6.6 6.3 5.334 7.0 6.8 6.4 6.0 5.136 6.5 6.1 5.8 4.940 4.8 5.4 4.542 5.1 4.350 3.6

Page 18: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

18 LR 1130 – 1002.04

Lift chart - luffing jib (No. 1309.xx) Main boom 83° TLT 10576238 M188886 Offiziell

Capacities in metric tonnes with luffing jib (No. 1309.xx), 52.3 t counterweight + 20 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 23 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

12.2 37.614 33.7 30.216 29.1 27.1 24.018 25.5 23.9 22.1 18.320 22.9 21.5 19.8 17.5 11.824 18.7 17.9 16.5 15.1 10.9 7.526 17.4 16.5 15.2 14.2 10.6 7.2 5.130 14.5 13.3 12.6 9.9 6.9 4.9 3.032 13.7 12.5 11.9 9.5 6.7 4.8 2.936 11.4 10.6 8.9 6.4 4.6 2.738 10.9 10.1 8.5 6.3 4.5 2.644 8.8 7.6 6.0 4.2 2.450 6.7 5.5 3.9 2.255 5.1 3.7 2.160 4.6 3.570 3.1

Main boom 32 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

13.3 30.615 28.1 24.717 25.2 22.8 20.219 22.5 20.5 18.7 15.922 19.5 17.7 16.4 14.5 10.926 16.6 15.2 14.1 12.7 10.0 7.028 15.4 14.3 13.3 11.9 9.7 6.8 4.930 13.5 12.6 11.3 9.4 6.7 4.7 2.934 11.3 11.3 10.2 8.7 6.4 4.5 2.738 10.1 9.2 8.2 6.1 4.3 2.540 8.8 7.8 6.0 4.2 2.544 7.7 7.2 5.7 4.0 2.350 6.2 5.2 3.8 2.155 4.8 3.6 2.065 3.4 3.070 2.6

Main boom 38 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t14 24.916 22.6 20.318 20.2 18.5 16.820 18.1 16.7 15.4 13.522 16.5 15.3 14.1 12.4 10.026 14.2 13.1 12.2 10.8 9.1 6.628 13.4 12.4 11.5 10.2 8.7 6.5 4.732 11.2 10.4 9.3 8.1 6.1 4.5 2.834 10.6 9.9 8.8 7.7 5.9 4.4 2.736 9.5 8.4 7.4 5.8 4.3 2.640 8.6 7.7 6.8 5.4 4.1 2.442 7.4 6.5 5.2 3.9 2.346 6.3 6.0 4.9 3.7 2.250 5.5 4.5 3.5 2.165 3.1 2.670 2.2

Main boom 47 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

15.1 18.317 16.8 15.119 15.1 13.9 12.222 13.1 12.1 10.7 9.824 12.2 11.1 9.8 9.0 7.728 10.9 9.9 8.7 8.0 6.9 5.330 10.3 9.4 8.3 7.5 6.5 5.1 4.132 9.1 7.9 7.2 6.3 4.9 3.9 2.634 8.6 7.6 6.9 5.9 4.6 3.7 2.636 7.4 7.3 6.6 5.7 4.4 3.5 2.540 6.7 6.1 5.2 4.0 3.2 2.344 5.7 4.8 3.7 2.9 2.046 5.4 4.6 3.5 2.848 4.5 3.4 2.655 3.8 2.9 2.265 2.3

Main boom 50 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 55.1 60.8 69.5(m) t t t t t t t t

15.5 16.418 14.6 13.019 13.9 12.3 11.022 12.0 10.7 9.8 8.924 11.3 9.8 9.0 8.2 7.026 10.7 9.1 8.5 7.7 6.6 5.828 10.2 8.7 7.9 7.3 6.2 5.5 4.830 9.6 8.3 7.6 6.9 5.9 5.3 4.6 3.636 6.8 6.7 6.0 5.1 4.6 4.0 3.138 6.5 5.8 4.9 4.3 3.8 3.042 5.4 5.4 4.5 3.9 3.4 2.746 5.0 4.2 3.6 3.1 2.450 3.9 3.3 2.8 2.155 3.5 3.0 2.560 2.7 2.365 2.0

Main boom 53 mJib length in (m)

Radius 22.7 25.7 28.7 31.7 34.4 37.4 40.4 49.1(m) t t t t t t t t

15.9 14.817 14.2 13.018 13.5 12.4 11.819 12.8 11.8 11.2 10.720 12.2 11.1 10.7 10.2 9.822 11.1 10.2 9.7 9.3 9.0 8.5 8.124 10.4 9.4 9.0 8.6 8.2 7.8 7.5 6.328 9.4 8.4 8.0 7.6 7.3 6.9 6.6 5.730 8.9 8.1 7.7 7.2 6.9 6.5 6.2 5.332 7.7 7.4 7.0 6.6 6.2 5.9 5.136 6.7 6.5 6.2 5.8 5.5 4.638 6.2 5.9 5.6 5.3 4.442 4.9 5.2 4.9 4.044 4.9 4.7 3.948 3.8 3.655 3.1

Page 19: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 19

Lift chart - luffing jib (No. 1309.xx) Main boom 75° TLT 10576238 M188886 Offiziell

Capacities in metric tonnes with luffing jib (No. 1309.xx), 52.3 t counterweight + 20 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 23 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

18.3 27.922 23.3 22.724 21.0 20.8 19.726 19.0 18.8 17.9 16.230 15.9 15.8 15.3 14.8 10.336 12.5 12.4 12.1 9.5 6.640 10.8 10.6 9.0 6.4 4.542 10.0 8.6 6.2 4.4 2.544 9.4 8.3 6.1 4.3 2.546 8.8 8.0 6.0 4.2 2.448 7.8 5.9 4.1 2.350 7.4 5.8 4.0 2.355 6.6 5.5 3.8 2.160 5.1 3.665 4.5 3.575 3.1

Main boom 32 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

20.7 21.824 19.0 17.826 17.6 16.5 15.630 15.3 14.3 13.7 12.632 14.1 13.5 12.9 11.9 9.538 11.2 10.9 10.0 8.8 6.342 9.7 9.0 8.1 6.1 4.344 9.1 8.6 7.8 5.9 4.246 8.3 7.5 5.8 4.1 2.448 7.9 7.2 5.7 4.0 2.350 7.3 6.9 5.6 3.9 2.255 6.2 5.2 3.8 2.160 4.8 3.665 4.4 3.470 3.275 3.0

Main boom 38 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

22.2 17.426 15.0 14.128 14.0 13.2 12.430 13.1 12.4 11.7 10.334 12.0 11.1 10.5 9.4 8.240 9.7 9.0 8.1 7.2 5.542 8.7 7.7 6.9 5.4 3.944 8.3 7.4 6.7 5.3 3.946 7.1 6.4 5.2 3.8 2.348 6.9 6.1 5.0 3.7 2.350 6.6 5.9 4.8 3.7 2.255 5.3 4.4 3.4 2.160 4.5 3.9 3.165 3.6 2.870 3.2 2.675 2.3

Main boom 47 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

24.6 11.928 10.7 10.030 10.1 9.4 8.432 9.5 8.8 7.9 7.234 9.1 8.3 7.5 6.936 8.7 7.9 7.1 6.6 5.738 7.5 6.7 6.2 5.440 7.3 6.4 5.9 5.242 7.0 6.1 5.6 4.9 3.944 5.9 5.3 4.7 3.746 5.7 5.1 4.5 3.5 2.848 5.0 4.9 4.3 3.4 2.750 4.8 4.0 3.2 2.555 3.6 2.8 2.160 3.3 2.465 2.1

Main boom 50 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 55.1 60.8 69.5(m) t t t t t t t t

25.3 10.328 9.6 8.430 9.0 7.932 8.5 7.5 6.934 8.0 7.1 6.5 6.036 7.8 6.7 6.2 5.738 6.3 5.9 5.4 4.740 6.1 5.6 5.1 4.4 4.042 5.9 5.3 4.9 4.2 3.8 3.244 5.1 4.6 4.0 3.6 3.146 5.0 4.4 3.8 3.4 2.9 2.248 4.8 4.2 3.6 3.2 2.8 2.150 4.1 3.4 3.0 2.655 3.0 2.6 2.260 2.8 2.365 2.1

Main boom 53 mJib length in (m)

Radius 22.7 25.7 28.7 31.7 34.4 37.4 40.4 49.1(m) t t t t t t t t

26.1 9.028 8.5 7.830 8.0 7.3 7.0 6.632 7.5 6.8 6.6 6.3 6.134 7.1 6.5 6.2 5.9 5.7 5.5 5.136 6.9 6.1 5.9 5.6 5.4 5.1 4.938 6.7 5.9 5.6 5.3 5.1 4.8 4.6 3.940 5.7 5.4 5.1 4.9 4.6 4.4 3.742 5.2 4.8 4.6 4.4 4.2 3.544 4.5 4.7 4.4 4.1 4.0 3.346 4.6 4.3 4.0 3.8 3.148 4.2 3.9 3.6 3.050 3.7 3.5 2.855 2.9 2.560 2.3

Page 20: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

20 LR 1130 – 1002.04

Lift chart - luffing jib (No. 1309.xx) Main boom 65° TLT 10576238 M188886 Offiziell

Capacities in metric tonnes with luffing jib (No. 1309.xx), 52.3 t counterweight + 20 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 23 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5 78.5(m) t t t t t t t t

25.6 18.328 16.330 15.0 14.732 13.8 13.634 12.8 12.6 12.436 11.7 11.6 11.340 10.2 10.1 9.842 9.5 9.2 8.744 8.9 8.7 8.348 7.7 7.3 6.050 7.3 6.9 5.955 6.0 5.6 3.960 4.8 3.8 2.065 4.2 3.670 3.6 3.375 2.9

Main boom 32 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5(m) t t t t t t t

29.4 14.332 12.834 11.9 11.636 11.1 10.8 10.638 10.3 10.1 9.940 9.4 9.2 8.942 8.8 8.6 8.444 8.3 8.1 7.946 7.6 7.4 7.048 7.2 7.0 6.650 6.6 6.255 5.7 5.3 4.960 4.7 4.2 3.665 3.6 3.270 3.1 2.875 2.7 2.4

Main boom 38 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8 69.5(m) t t t t t t t

31.9 12.134 11.236 10.4 10.138 9.7 9.440 9.0 8.8 8.642 8.3 8.0 7.744 7.7 7.5 7.246 7.3 7.1 6.848 6.7 6.4 5.950 6.3 6.0 5.655 5.2 4.8 4.260 4.2 3.6 3.165 3.6 3.1 2.670 2.7 2.275 2.3

Main boom 47 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8(m) t t t t t t

35.7 9.236 9.138 8.640 8.0 7.642 7.5 7.244 7.1 6.8 6.446 6.4 6.0 5.648 6.0 5.7 5.350 5.7 5.4 5.055 4.7 4.4 3.860 3.9 3.3 2.665 2.9 2.270 2.5

Main boom 50 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8(m) t t t t t t37 8.340 7.642 7.1 6.744 6.7 6.3 5.946 6.0 5.648 5.6 5.3 4.850 5.3 5.0 4.655 4.4 4.0 3.460 3.5 2.9 2.265 2.570 2.2

Main boom 53 mJib length in (m)

Radius 22.7 25.7 28.7 31.7 34.4 37.4 40.4 49.1(m) t t t t t t t t

38.2 7.440 7.1 6.542 6.7 6.2 6.044 6.3 6.0 5.7 5.446 5.9 5.7 5.5 5.2 5.048 5.4 5.2 5.0 4.8 4.550 5.0 4.9 4.7 4.6 4.3 4.155 4.1 4.0 3.8 3.6 3.060 3.3 3.1 2.665 2.2

Page 21: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 21

Lift chart - luffing jib (No. 1309.xx) Main boom 45° TLT 10576238 M188886 Offiziell

Capacities in metric tonnes with luffing jib (No. 1309.xx), 52.3 t counterweight + 20 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 23 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1 60.8(m) t t t t t t

37.6 10.040 9.244 7.946 7.448 6.850 6.455 5.360 4.365 3.770 2.875 2.4

Main boom 32 mJib length in (m)

Radius 22.7 28.7 34.4 40.4 49.1(m) t t t t t

43.9 6.944 6.946 6.550 5.555 4.560 3.770 2.4

Main boom 38 mJib length in (m)

Radius 22.7 28.7 34.4 40.4(m) t t t t48 5.250 4.955 4.060 3.265 2.5

Main boom 47 mJib length in (m)

Radius 22.7 28.7(m) t t

54.5 3.155 3.060 2.3

Page 22: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

22 LR 1130 – 1002.04

Working range - fixed jib 15° and 30° (No. 0806.xx)

Main boom 88° – 30°

Boom configuration for boom lengths (17 m – 71 m) – see table 1 on page 10

Fixed jib configuration for fixed jib lengths (11 m – 32 m)Length Amount of fixed jib extensions

Fixed jib foot 5.5 m 1 1 1 1 1 1 1 1Fixed jib insert 3.0 m 1 1 1 1Fixed jib insert 6.0 m 1 1 2 2 3 3Fixed jib head 5.5 m 1 1 1 1 1 1 1 1Fixed jib length (m) 11 14 17 20 23 26 29 32

812 416202428323640444852566064687276 0 m0

4

8

16

20

12

24

28

32

36

40

44

48

56

60

52

64

68

72

76

80

84

88

92

96

100m

0 ft4060 2080120140 100160180200220240

0

40

60

20

80

100

120

140

160

180

200

220

240

260

280

300

320

ft

86°80°

70°

60°

50°

40°

30°

17 m

65 m68 m71 m

59 m

53 m

44 m

35 m

26 m

32 m

29 m

26 m

23 m

20 m

17 m

14 m

11 m

30° 15°

Page 23: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

LR 1130 – 1002.04 23

TLT 10576238 M188886 Offiziell

Lift chart - fixed jib (No. 0806.xx) Offset 15°

Capacities in metric tonnes with fixed jib (No. 0806.xx), 52.3 t counterweight + 20 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 17 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t5.5 24.010 24.0 14.212 23.6 13.4 8.615 22.5 12.3 7.9 5.016 22.0 11.9 7.7 4.918 21.1 11.3 7.3 4.720 19.4 10.8 7.0 4.524 16.8 9.7 6.4 4.226 15.6 9.2 6.2 4.136 7.5 5.5 3.642 5.3 3.548 3.3

Main boom 26 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t5.8 24.010 24.0 14.312 24.0 13.6 8.715 22.9 12.6 8.1 4.918 21.8 11.9 7.5 4.722 20.3 10.9 7.0 4.428 16.8 9.8 6.4 4.032 14.0 9.1 6.1 3.934 12.8 8.8 6.0 3.844 7.5 5.5 3.550 5.3 3.455 3.3

Main boom 35 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t6.1 24.010 24.0 13.613 23.7 12.8 8.115 23.2 12.3 7.8 4.918 21.8 11.5 7.4 4.724 19.3 10.4 6.7 4.332 13.6 9.4 6.1 3.940 9.7 8.4 5.7 3.742 9.0 8.2 5.6 3.650 7.2 5.3 3.555 5.2 3.460 3.3

Main boom 44 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t6.4 24.011 23.9 13.213 23.1 12.7 8.116 21.9 12.1 7.7 4.718 21.0 11.6 7.5 4.624 18.5 10.6 6.8 4.332 13.1 9.7 6.3 4.040 9.3 8.8 5.9 3.750 6.2 6.8 5.5 3.560 4.7 5.0 3.365 4.2 3.370 3.2

Main boom 53 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t6.7 24.011 22.5 12.313 21.7 11.9 7.616 20.5 11.3 7.4 4.724 17.1 10.0 6.5 4.332 12.7 9.3 6.1 4.040 8.9 8.2 5.8 3.748 6.3 6.9 5.5 3.555 4.7 5.2 5.1 3.465 3.5 3.8 3.370 3.1 3.275 2.7

Main boom 59 m

Fixed jib length in (m)Radius 11 17 26 32

(m) t t t t6.9 22.410 21.4 14.514 19.9 13.7 7.416 19.0 13.3 7.2 4.618 18.2 12.9 6.9 4.524 15.5 11.9 6.4 4.232 12.0 11.1 6.0 4.040 8.5 8.8 5.7 3.748 6.0 6.4 5.5 3.560 3.5 3.9 4.3 3.470 2.4 2.8 3.075 2.2 2.4

Main boom 65 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t7.2 20.311 19.2 11.014 18.0 10.6 7.116 17.2 10.3 7.0 4.518 16.4 10.0 6.8 4.424 14.1 9.2 6.3 4.232 11.2 8.5 5.9 3.940 8.2 7.6 5.6 3.748 5.7 6.3 5.2 3.565 2.4 2.9 3.2 3.170 2.2 2.5 2.775 2.1

Main boom 68 m

Fixed jib length in (m)Radius 11 20 26 29

(m) t t t t7.3 19.111 18.0 10.614 16.8 10.3 7.015 16.6 10.1 6.9 5.616 16.1 10.0 6.8 5.618 15.2 9.7 6.6 5.524 13.2 8.9 6.2 5.132 10.7 8.2 5.8 4.840 7.9 7.4 5.5 4.648 5.5 6.0 5.1 4.465 2.3 2.8 3.1 3.270 2.1 2.4 2.5

Main boom 71 m

Fixed jib length in (m)Radius 11 14 17

(m) t t t7.4 17.79 17.4 14.810 17.1 14.7 12.412 16.4 14.3 12.214 15.6 13.7 11.916 15.0 13.2 11.518 14.2 12.7 11.224 12.3 11.2 10.132 10.2 9.6 9.040 7.6 7.7 7.748 5.3 5.5 5.665 2.1 2.3 2.5

Page 24: Crawler Crane LR 1130 EN - liebherr.com · 13930 1360 1000 6350 6050 440 1345 3040 5310 R 5700 R 6530. LR 1130 – 1002.04 3 Transport dimensions and weights Basic machine and main

Lift chart - fixed jib (No. 0806.xx) Offset 30°

LR 1

130

— 8

90

055

814

— V

ersi

on

04 —

11/

2017

Sub

ject

to

chan

ge

with

out

no

tice.

TLT 10576238 M188886 Offiziell

Capacities in metric tonnes with fixed jib (No. 0806.xx), 52.3 t counterweight + 20 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 17 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t8 24.014 21.0 11.518 18.0 10.2 6.722 15.7 9.0 6.2 4.024 14.9 8.6 6.0 3.926 14.4 8.2 5.8 3.828 13.9 8.0 5.7 3.832 7.5 5.4 3.636 7.2 5.3 3.540 5.2 3.542 5.1 3.448 3.3

Main boom 26 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t8.3 24.014 21.6 11.718 19.9 10.7 6.822 17.7 9.7 6.4 4.024 16.8 9.3 6.2 3.926 16.1 9.0 6.0 3.828 15.4 8.7 5.9 3.832 14.1 8.1 5.7 3.736 11.8 7.7 5.5 3.644 7.3 5.3 3.450 5.2 3.455 3.3

Main boom 35 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t8.6 23.415 21.0 10.918 20.1 10.3 6.622 19.3 9.7 6.2 4.026 17.5 9.1 5.9 3.930 15.1 8.6 5.7 3.734 12.6 8.1 5.6 3.638 10.7 7.8 5.5 3.642 9.1 7.5 5.4 3.550 7.1 5.2 3.455 5.1 3.360 3.3

Main boom 44 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t8.9 22.115 20.4 10.919 19.3 10.2 6.524 18.0 9.6 6.1 3.928 15.9 9.1 5.9 3.832 13.4 8.8 5.8 3.736 11.2 8.4 5.6 3.644 8.0 7.7 5.4 3.550 6.3 7.0 5.3 3.460 4.8 5.1 3.365 4.2 3.370 3.2

Main boom 53 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t9.3 20.615 19.3 10.119 18.1 9.6 6.224 16.3 9.1 5.9 3.828 15.0 8.8 5.7 3.732 12.9 8.5 5.6 3.736 10.8 8.4 5.5 3.644 7.7 7.5 5.3 3.555 4.8 5.4 5.0 3.465 3.6 4.0 3.370 3.2 3.380 2.2

Main boom 59 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t9.5 19.316 17.8 9.619 16.5 9.3 6.024 14.8 8.8 5.8 3.828 13.4 8.6 5.6 3.732 12.1 8.3 5.5 3.636 10.4 8.0 5.4 3.644 7.4 7.2 5.3 3.455 4.5 5.2 5.1 3.360 3.6 4.2 4.6 3.370 2.6 3.0 3.375 2.3 2.6

Main boom 65 m

Fixed jib length in (m)Radius 11 20 26 32

(m) t t t t7.2 20.311 19.2 11.014 18.0 10.6 7.116 17.2 10.3 7.0 4.519 16.1 9.9 6.7 4.426 13.3 9.0 6.1 4.134 10.4 8.4 5.8 3.942 7.5 7.3 5.5 3.750 5.2 5.8 5.1 3.565 2.4 2.9 3.2 3.170 2.2 2.5 2.775 2.1

Main boom 68 m

Fixed jib length in (m)Radius 11 20 26 29

(m) t t t t7.3 19.111 18.0 10.614 16.8 10.3 7.015 16.6 10.1 6.9 5.616 16.1 10.0 6.8 5.620 14.5 9.4 6.4 5.328 11.8 8.6 5.9 4.936 9.2 7.9 5.6 4.744 6.6 6.7 5.3 4.555 3.9 4.5 4.7 4.365 2.3 2.8 3.1 3.270 2.1 2.4 2.5

Main boom 71 m

Fixed jib length in (m)Radius 11 14 17

(m) t t t9.9 15.412 15.0 12.914 14.5 12.6 10.816 13.8 12.3 10.718 13.3 11.8 10.420 12.7 11.4 10.124 11.6 10.5 9.528 10.7 9.9 9.036 9.1 8.7 8.144 6.6 6.9 6.955 4.0 4.2 4.465 2.2 2.4 2.6

Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, A-6710 Nenzing/Austria Tel.: +43 50809 41–473 Fax: +43 50809 41–499 [email protected] www.liebherr.com