CR5-7 A-A-A-E-HQQE 1x220/240 50HZ - Water Treatment … … · GRUNDFOS DATA BOOKLET CR5-7...

GRUNDFOS DATA BOOKLET

CR5-7 A-A-A-E-HQQE 1x220/240 50HZ Grundfos Pump 96529456

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttp://www.lenntech.com/grundfos/CRFAM/96529456/CR-5-7-A-A-A-E-HQQE.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name: Lenntech BV - lenntech.comCreated by: [email protected]: +31 15 2610900Fax: +31 15 2616289Date: -

Printed from Grundfos CAPS [2013.03.059]

Position Qty. Description1 CR 5-7 A-A-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96529456

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – allother wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handlingand easy service and access. Power transmission is via a split coupling. Pipework connection is viaoval flanges with internal Rp threads.

The pump is fitted with a 1-phase, fan-cooled asynchronous motor.

Further product detailsSteel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electricalfield around the products ensures deposition of paint particles as a thin, well-controlled layer on thesurface. An integral part of the process is a pretreatment. The entire process consists of theseelements:

1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpA standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motorstool by means of two coupling guards.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pumphead has a combined 1/2" priming plug and air vent screw.

1/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96529456&freq=50&lang=ENU



The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type isassembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type issuitable for high-pressure applications. The cartridge construction also protects the pump shaft from possiblewear from a dynamic O-ring between pump shaft and shaft seal.

Primary seal:- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness ofthis material pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,and the shape of the blades ensure a high efficiency.

The base is made of cast iron. The oval flanges are bolted to the base. The discharge side of thebase has a combined drain plug and bypass valve. The pump is secured to the foundation by fourbolts through the base plate.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DINstandards. The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).Electrical tolerances comply with IEC 60034.

The motor has built-in thermal protection (PTO current and temperature sensors) in accordance withIEC 60034-11 and requires no further motor protection. The protection reacts to both slow- andquick-rising temperatures, e.g. constant overload and stalled conditions.As the thermal protection incorporates automatic reset, the motor must be connected in a way whichensures that the automatic reset cannot cause accidents.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

2/8



Position Qty. Description

Technical:Speed for pump data: 2789 rpmRated flow: 5.8 m³/hRated head: 33.1 mShaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex A

Materials:Pump housing: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 16 bar / 120 °C

16 bar / -20 °CFlange standard: OVALPipe connection: Rp 1 1/4Flange size for motor: FT115

Electrical data:Motor type: 90SBIE Efficiency class: NANumber of poles: 2Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kW

1.1 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 7,40/6,70 AStarting current: 390 %Cos phi - power factor: 0,98/0,99Rated speed: 2770 rpmMotor efficiency at full load: 73-71 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.57Net weight: 31 kgGross weight: 33.9 kgShipping volume: 0.08 m3

3/8



96529456 CR 5-7 50 Hz

H[m]

0

5

10

15

20

25

30

35

40

45

50

Q [m³/h]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0

eta[%]

0

10

20

30

40

50

60

70

80

90

100

CR 5-7, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

NPSH[m]

0

1

2

3

4

5

6

7P1

P2

4/8



H[m]

0

5

10

15

20

25

30

35

40

45

50

Q [m³/h]0 1 2 3 4 5 6 7

eta[%]

0

10

20

30

40

50

60

70

80

90

100

CR 5-7, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0.0

0.5

1.0

NPSH[m]

0

2

4

P1

P2

75 180

411

220

100

160

2022

G 1

/2

50

4 x

ø13.

5

M10

x 4

0R

p 1

1/4

145

139

178

281

G 1

/2G

1/2

Description ValueProduct name: CR 5-7 A-A-A-E-HQQEProduct No: 96529456EAN number: 5700397166130

Technical:Speed for pump data: 2789 rpmRated flow: 5.8 m³/hRated head: 33.1 mHead max: 46.8 mImpellers: 7Shaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex APump type: CR 5Stages: 7Pump version: AModel: A

Materials:Pump housing: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Material code: ACode for rubber: E

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 16 bar / 120 °C

16 bar / -20 °CFlange standard: OVALConnect code: APipe connection: Rp 1 1/4Flange size for motor: FT115

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Electrical data:Motor type: 90SBIE Efficiency class: NANumber of poles: 2Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kW

1.1 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 7,40/6,70 AStarting current: 390 %Cos phi - power factor: 0,98/0,99Rated speed: 2770 rpmMotor efficiency at full load: 73-71 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): FMotor protec: PTOMotor No: 85215705

Others:Minimum efficiency index, MEI ≥: 0.57

5/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96529456&freq=50&lang=ENU



Description ValueNet weight: 31 kgGross weight: 33.9 kgShipping volume: 0.08 m3

6/8



Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

96529456 CR 5-7 50 Hz

75180

411

220

100

160

20

22G 1/2

50

4 x ø13.5

M10 x 40Rp 1 1/4

145

139

178

281

G 1/2 G 1/2

7/8



Note! All units are in [mm] unless others are stated.

96529456 CR 5-7 50 Hz

8/8

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

CR5-7 A-A-A-E-HQQE 1x220/240 50HZ - Water Treatment … … · GRUNDFOS DATA BOOKLET CR5-7...

Documents

Transcript of CR5-7 A-A-A-E-HQQE 1x220/240 50HZ - Water Treatment … … · GRUNDFOS DATA BOOKLET CR5-7...