CR-FCB - Stockton · PDF file1” X 3/8” 3/8” Y Optional Vent Slots...

55
X 3/8” 3/8” Y 1-87-STOCKTON FAX: (702) 651-0948 [email protected] FaceBook.com/stocktonproducts www.StocktonProducts.com VI-FCP: Vertical Insert for Fiber Cement Panel The VI-FCP Vertical Insert creates an attractive 1/2” architectural reveal when used in conjunction with the VR-FCP Vertical Retainer. Note: Attach panel per manufacturer’s recommended installation instructions. Note: Not to be used in horizontal applications. Note: The VR-FCP Retainer is sold separately. Length X Size Y Size 10’ 3/8” 1/2” Materials: ● Aluminum Alloy (6063 T-5) Note: Standard length is 10 feet. Additional lengths available upon request. ASTM Codes: B136 (Anodize Coating) B244 (Anodize Coating) C1063 (Accessories) D4214 (Paint Films) KEY ©2018 Stockton Products. All rights reserved worldwide. NEW NEW VR-FCP VI-FCP

Transcript of CR-FCB - Stockton · PDF file1” X 3/8” 3/8” Y Optional Vent Slots...

Page 1: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

X

3/8” 3/8”

Y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

VI-FCP: Vertical Insert for Fiber Cement PanelThe VI-FCP Vertical Insert creates anattractive 1/2” architectural reveal whenused in conjunction with the VR-FCPVertical Retainer.

Note: Attach panel per manufacturer’srecommended installation instructions.

Note: Not to be used in horizontalapplications.

Note: The VR-FCP Retainer is soldseparately.

Length X Size Y Size10’ 3/8” 1/2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

VR-FCP

VI-FCP

Page 2: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

Y

X

3/8”

3/8”

Z

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

VO-FCP: Vertical Offset Insert for Fiber Cement Panel

The VO-FCP Vertical Offset Insert createsan attractive 1/2” architectural revealwhen used in conjunction with the VR-FCP Vertical Retainer. This is an excellentmolding for the transition from a singlelayer of fiber cement panels to lap siding.

Note: Attach panel per manufacturer’srecommended installation instructions.

Note: Not to be used in horizontalapplications.

Note: The VR-FCP Retainer is soldseparately.

Length X Size Y Size Z Size10’ 3/8" 3/4" 1/2"

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

VR-FCP

VO-FCP

Page 3: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

X

3/8”3/8”

Y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

VLI-FCP: Vertical Lap Insert for Fiber Cement Panel

The VLI-FCP Vertical Lap Insert creates anarchitectural 1/2” reveal when used withthe VR-FCP Vertical Retainer.

Note: Attach panel per manufacturer’srecommended installation instructions.

Note: Not to be used in horizontalapplications.

Note: The VR-FCP Retainer is soldseparately.

Length X Size Y Size10’ 3/4" 1/2"

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

VR-FCP

VLI-FCP

Page 4: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

X

2 3/4”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

VR-FCP: Vertical Retainer for Fiber Cement PanelThe VR-FCP Vertical Retainer acts as thereceiver for a Vertical Insert, VerticalOffset or Vertical Lap Insert. This allowsfor easy panel installation.

Note: Attach panel per manufacturer’srecommended installation instructions.

Note: Not to be used in horizontalapplications.

Length X Size10’ 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 5: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

X

3/8”

Y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

ICT-FCP: Inside Corner Transition for Fiber Cement Panel

The ICT-FCP Inside Corner Transitioncreates an inside corner reveal whentransitioning from a single fiber cementpanel to two layers of lap siding.

Note: Attach panel per manufacturer’srecommended installation instructions.

Note: Not to be used in horizontalapplications.

Length X Size Y Size10’ 3/8" 3/4"

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 6: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

3/8”

X3/8”

Y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

OCT-FCP: Outside Corner Transition for Fiber Cement Panel

The OCT-FCP Outside Corner Transitionmolding creates a straight and true,outside corner with exposed flanges thatcover the vertical ends of the fibercement panels. Provides a transition froma single fiber cement panel to two layersof lap siding.

Note: Attach panel per manufacturer’srecommended installation instructions.

Note: Not to be used in horizontalapplications.

Length X Size Y Size10’ 3/8" 3/4"

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEWNEWNEW

Page 7: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

1”X

3/8” 3/8”

Y

OptionalVent Slots

©2018 Stockton Products. All rights reserved worldwide.

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

CR-FCP: Channel Reveal for Fiber Cement Panels● Available Vented or No Vents● Now Available PrimedA decorative reveal used to create anaesthetically pleasing vertical accentbetween panels. Available vented forsoffit venting requirements.

Note: Do not use in a horizontalcondition.

Length X Size Y Size10’ 3/8” 1/2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 8: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

yOptionalVent Slots

OptionalWeepHoles

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DCS: Drywall Channel Screed● Available With 1/8” x 1” Vent Slotsor No Vents

Drywall version of the plaster channelscreed used to create a decorative reveal& to separate dissimilar materials. Usedwith one-coat stucco and direct appliedsystems. Available with 1/8” weep holes.

Length X Size Y Size10’ 1/2” 1/2”

*5/8” 3/4”1”

1 1/2”2”3”4”

*Not available with a 1 1/2” Y size.

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 9: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

OptionalVent Slots

x

y

3/16”

3/16”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DCS 50-2: Drywall Channel Screed 50 - 2 pc.● Available With 1/8” x 1” Vent Slots

or No VentsA two-piece version of the DCS seriesmolding that provides 1/4” +/-movement where a “true” expansion joint is required. Used for stucco overblock or when only a 1/2” depth isrequired.

Length X Size Y Size10’ 1/2” 1/4”

3/4” 1/2”3/4”

1”1 1/2”

2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 10: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

xy

KeyHoles

KeyHoles

©2018 Stockton Products. All rights reserved worldwide.

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DMCT: High Strength Corner TrimA 90° outside corner with taping flangesfor drywall. Provides a high strengthcorner for high impact areas. Includeskey holes for proper plaster adhesion.

Length X Size Y Size10’ 3/8” 7/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 11: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y

zx

OptionalVent Slots

KeyHoles

KeyHoles

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DRM: Wall Reveal● Available With 1/8” x 1” Vent Slots

or No VentsA reveal molding with taping flangesthat provides a decorative reveal indrywall. This molding is installed afterthe drywall board, greatly improvinginstallation ease and time. Includes keyholes for proper plaster adhesion.

Note: Not all X Sizes (Depth) or Y Sizes(Reveal) combinations are available.Please consult with customer service.

Length X Size Y Size Z Size10’ 1/4” 1/8” 7/8”

1/2” 1/4”5/8” 3/8”

1/2”5/8”3/4”

1”1 1/2”

2”3”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 12: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

KeyHoles

x y

z

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DRMB: Reveal Base“Z” style with a taping flange thatprovides a reveal and a termination pointfor drywall. Includes key holes for properplaster adhesion.

Length X Size Y Size Z Size10’ 5/8” 1” 7/8”

1 1/2”2”

2 1/2”3”

3 1/2”4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 13: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

KeyHoles

x

y

z

OptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DRMF: F Wall Reveal● Available With 1/8” x 1” Vent Slots

or No Vents“F” style with a taping flange thatcreates a reveal and board terminationpoint at tops and bases of walls and atdoor and window frames. Includes keyholes for proper plaster adhesion.

Note: Not all X Sizes (Depth) or Y Sizes(Reveal) combinations are available.Please consult with customer service.

Length X Size Y Size Z Size10’ 1/4” 1/8” 7/8”

1/2” 1/4”5/8” 3/8”

1/2”5/8”3/4”

1”1 1/2”

2”3”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 14: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

KeyHolesy

x

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DRML: Edge Trim“L” style drywall molding with a tapingflange that provides a drywalltermination point by capping of the rawedge of the drywall board. Includes keyholes for proper plaster adhesion.

Length X Size Y Size10’ 1/2” 7/8” 5/8” 3/4” 1” 1 1/2” 2” 3” 4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 15: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

KeyHoles

KeyHoles

x

x

y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DRMW: W Corner Reveal“W” style drywall molding with tapingflanges that creates an inverted cornerfor setbacks, stepdowns and otherspecial drywall conditions. Includes keyholes for proper plaster adhesion.

Length X Size Y Size10’ 1/2” 7/8”

5/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 16: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

KeyHoles

x y

z

©2018 Stockton Products. All rights reserved worldwide.er® and Superior MoistureProtection™ are all trademarks of Stockton Products™.

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DRMZ: Z Wall Reveal● Available With 1/8” x 1” Vent Slots

or No Vents“Z” style with a taping flange thatprovides a reveal and a termination pointfor drywall at door frames, windows andwall bases. Includes key holes for properplaster adhesion.

Note: Not all X, Y and Z conbinations are available. Please contact factory for details.

Length X Size Y Size Z Size10’ 1/4” 1/8” 7/8”

1/2” 1/4”5/8” 3/8”

1/2”5/8”3/4”

1”1 1/2”

2”3”4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 17: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

Key Holes

y

x

x

yOptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DRWT: “W” Reveal● Available With Vents or No Vents“W” style drywall molding with tapingflange that creates a reveal at awall/drywall ceiling condition. Includeskey holes for proper plaster adhesion.

Length X Size Y Size10’ 3/4” 3/4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

ShownVented

Page 18: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

OptionalVent Slots

x y3/16”

z

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DS: Drip Screed● Available With 1/8” x 1” Vent Slots

or No VentsAn aesthetically pleasing drip screed forconventional 3-coat stucco that functionsas a plaster stop/drip edge and creates areveal at the fascia/soffit cornercondition.

Note: *1 3/8” X Size available in 7/8” YSize only.Note: **2” not available vented.Note: Not all X Sizes (Depth) or Y Sizes(Reveal) combinations are available.Please consult with customer service.

Length X Size Y Size Z Size10’ 7/8” 3/4” 7/8”

*1 3/8” 7/8”**2”3”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 19: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

1”

y3/16”

3/16”

x

OptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

DS300: Drip Screed 3” Reveal● Available With 1/8” x 1” Vent Slots

or No VentsAn aesthetically pleasing drip screed forconventional 3-coat stucco that functionsas a plaster stop/drip edge and creates areveal at the fascia/soffit cornercondition.

Note: Available vented. Non-vented is aspecial order. Please contact factory fordetails.

Length X Size Y Size10’ 7/8” 3”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 20: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

yx

OptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

EES 75-100 2PC: Plaster Edge Expansion Screed - 2 pc.● Available With 1/8” x 1” Vent Slots

or No VentsA 2-piece plaster control screed thatpermits movement in a plaster soffit/wallcondition.

Note: Available as a special order.Contact factory for lead times.

Length X Size Y Size10’ 3/4” 1”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED Shown

Vented

Page 21: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

1 5/8”

X

3/8”

Y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

F MOLD-FCP: F Mold for Fiber Cement Panel● Now Available PrimedCreates a decorative reveal in awall/soffit transition.

Length X Size Y Size10’ 3/8” 1/2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 22: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

OptionalWeepHoles

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

F-D 75-75: F Drip MoldingProvides a plaster stop/drip molding withan aesthetic reveal for window heads,tops of door frames and plate conditionswhere a drip edge is required. Availablewith 1/8” weep holes.

WINDOW

Length X Size Y Size10’ 3/4” 3/4” 1 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 23: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y x

z

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

FCM: Fascia Corner MoldingA plaster stop for fascia/soffit cornerconditions that provides a reveal on thesoffit portion.

Length X Size Y Size Z Size10’ 3/4” 7/8” 2 3/16”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 24: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

yOptionalVent Slots

OptionalWeepHoles

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

FDM: F Drywall Molding● Available With 1/8” x 1” Vent Slotsor No Vents

A drywall stop/control screed for drywall,used at the top or base of columns, thetop of walls at the ceiling, or at the baseto create a reveal. Also used at the top ofwindows to permit the continuation of ahorizontal reveal at the window line.Available with 1/8” weep holes.

Note: *Not available with a 1 1/2” Y size.Note: **Ava ilable on 1/2” reveal.

Length X Size Y Size10’ 1/2” **1/2” *5/8” 3/4” 1” 1 1/2” 2” 3” 4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 25: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

OptionalWeepHoles

x

yOptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

FPM: F Plaster Molding● Available With 1/8” x 1” Vent Slots

or No VentsA plaster stop/control screed forconventional 3-coat stucco, used at thetop or base of columns, the top of wallsat the ceiling, or at the base to create areveal. Also used at the top of windowsto permit the continuation of ahorizontal reveal at the window line.Available with 1/8” weep holes.

Note: *1 3/8” X Size available in 3/4” Y Size only.

Length X Size Y Size10’ 3/4” 1/2”

*1 3/8” 3/4”1”

1 1/2”2”

2 1/2”3”4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 26: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y x

3/16”

3”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

FRWDM: Facia/Recessed Window Drip MoldingA plaster stop for fascia/soffit cornerconditions that provides a 3 1/8” revealleg with a drip edge for recessed windowconditions where a drip edge is required.Can be also be used when a caulking legis required for backer rod and sealant.

WINDOW

Length X Size Y Size10’ 7/8” 3 1/8”

1 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 27: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y x

3/16”

3”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

FRWM: Facia/Recessed Window MoldingA plaster stop for fascia/soffit cornerconditions that provides a 3 1/8” revealleg for recessed windows. Can be usedwhen a caulking leg is required forbacker rod and sealant.

WINDOW

Length X Size Y Size10’ 7/8” 3 1/8”

1 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 28: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

X

Y

1 1/8”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

IC-FCP: Inside Corner for Fiber Cement Panel● Now Available PrimedUsed in an inside corner condition wheretwo fiber cement panels meet.

Length X Size Y Size10’ 1/2” 1/2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 29: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

1 5/8”

X

Y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

ICR-FCP: Inside Corner Reveal for Fiber Cement Panel● Now Available PrimedAn inside corner trim that creates adecorative 3/8” reveal at an inside cornercondition.

Length X Size Y Size10’ 3/8” 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 30: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

X3/8”

1 1/8”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

J MOLD-FCP: J Mold for Fiber Cement Panel● Now Available PrimedUsed as a termination molding to caseoff the fiber cement panel.

Length X Size10’ 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 31: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

JDM: J Drywall MoldingA drywall version of the “J” molding.Gives a nice finished look to drywallterminations.

Length X Size Y Size10’ 1/2” 1 1/8”

5/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 32: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

JPM: J Plaster MoldingA plaster stop/casing bead forconventional 3-coat stucco used in avariety of conditions that gives a nicefinished look at all plaster terminations.

Note: *2” Y Size available on 1 1/2” and1 3/8” X Size only.

Length X Size Y Size10’ 3/4” 1 1/8”

1” *2”1 1/2”1 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 33: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y

x

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

NVS: Narrow V ScreedA narrow control screed that is bothdecorative and functional. A 1/8” wideexpansion screed for conditions thatrequire crack control with a minimalreveal.

Length X Size Y Size10’ 1/2” 1/8”

3/4”7/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 34: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

1 1/2” X

X

3/8”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

OC-FCP: Outside Corner for Fiber Cement Panel● Now Available PrimedCreates a decorative reveal and a highstrength protective corner at an outsidecorner condition.

Length X Size10’ 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 35: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

1 1/2”X

X

3/4”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

OCG-FCP: Outside Corner Guard for Fiber Cement Panel● Now Available PrimedCreates a decorative high strengthcorner at an outside corner condition.

Length X Size10’ 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 36: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

xy

3/16”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCM: Plaster Corner MoldingCreates a plaster stop and high strengthcorner for conventional 3-coat stuccowith an aesthetically pleasing exposededge at all outside corner conditions.

Length X Size Y Size10’ 3/4” 7/8”

1 5/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 37: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

yOptionalVent Slots

OptionalWeepHoles

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCS: Plaster Channel Screed● Available With 1/8” x 1” Vent Slots

or No VentsA decorative reveal used as a plasterstop/control screed for conventional 3-coat stucco to separate dissimilarmaterials and/or to create aestheticallypleasing shadow lines on the exteriorwalls, ceilings and soffits. Available with1/8” weep holes.

Note: *Venting is not available on the1/2” reveal. Note: **1 1/2” X Size available in 1 1/2”Y Size only.Note: ***Available in 3/4” Y Size only.

Length X Size Y Size10’ 3/4” *1/2”

1” 3/4”**1 1/2” 1”***1 3/8” 1 1/2”

2”2 1/2”

3”4”6”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 38: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y

zz

x

3/16”

3/16”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCS 50-25/25: Plaster Channel Screed 50-25/25Plaster channel screed with minimalreveal width and ground depth forconditions that require a control jointwith a small reveal for 1/2” of stuccoover block.

Length X Size Y Size Z Size10’ 1/2” 1/4” 1/4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 39: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

yOptionalVent Slots

OptionalWeepHoles

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCS 75-2: Plaster Channel Screed 75-2 Piece● Available With 1/8” x 1” Vent Slots

or No VentsA two-piece version of the PCS seriesmolding that provides 1/4” +/-movement where a “true” expansionjoint is required. In a double studcondition, this molding is typically usedin a horizontal condition at floor lineswhere deflection is an issue. 1/8” weepholes available.

Length X Size Y Size10’ 1/2” 1/4”

3/4” 1/2”3/4”

1”2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 40: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y

z

x

w

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCS 75-25/25: Plaster Channel Screed 75-25/25Plaster channel screed with minimalreveal width and ground depth forconditions that require a control jointwith a small reveal.

Length W Size X Size Y Size Z Size10’ 1/2” 3/4” 1/4” 1/4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 41: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

90° yz

x

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCS 75 Short V: Plaster Channel Screed Short VA plaster channel screed that creates aunique 90° “V” shaped reveal.

Length X Size Y Size Z Size10’ 1/2” 3/4” 2 7/8”

3/4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 42: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

90° y

3/16”

x

w

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCS 75 Wide V: Plaster Channel Screed Wide VA plaster channel screed that creates aunique, wide 90° “V” shaped reveal.

Length W Size X Size Y Size10’ 3 5/8” 3/4” 1 1/2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 43: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

3/16”

3/16”

OptionalVent Slots

OptionalWeepHoles

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PCS DA: Plaster Channel Screed DA● Available With 1/8” x 1” Vent Slots

or No VentsA decorative reveal used as a plasterstop/control screed for direct appliedand one coat systems.

Length X Size Y Size10’ 3/8” 1/2”

3/4”1”

1 1/2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 44: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

2”

X

1/2”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

PJ-FCP: Panel Joiner for Fiber Cement Panel● Now Available PrimedA functional trim piece used to join twopanels together in a vertical condition.

Note: Do not use in a horizontalcondition.

Length X Size10’ 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 45: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y

x

1”

OptionalVent Slots

x

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

RWM: “W” Reveal Molding● Available With Vents or No Vents“W” style molding that creates a revealat a wall and suspended/acousticalceiling.

AcousticalCeiling Tile

Length X Size Y Size10’ 3/4” 3/4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

ShownVented

Page 46: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

2” X

1/2”

97°

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

SB-FCP: Starter Base for Fiber Cement Panel● Now Available PrimedA functional starter trim piece for thefiber cement panel that also provides aweep point for moisture.

Length X Size10’ 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 47: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y

x

1/2” 1/2”

Vent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

SV: Soffit Vent● Available With 1/8” x 1” Vent SlotsFor use with E.I.F.S. as a soffit vent.

Note: 1/2” X Size available in 2” Y Size only.Note: Not all X Sizes (Depth) or Y Sizes(Reveal) combinations are available.Please consult with customer service.

Length X Size Y Size10’ 3/4” 3”

1/2” 2”4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 48: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

OptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

TDM: T Drywall Molding● Available With 1/8” x 1” Vent Slots

or No VentsProvides a reveal and acts as a drywallstop/control screed for drywall at wallbase and column base conditions wherea reveal and stop are required. Can beused to create a reveal at ceiling/wallconditions.

Length X Size Y Size10’ 1/2” 1/2”

5/8” 3/4”1”

1 1/2”2”3”4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 49: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

OptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

TRM: T Reveal Molding● Available With 1/8” x 1” Vent Slots

or No VentsProvides a reveal and acts as a plasterstop/control screed for conventional 3-coat stucco at wall base and columnbase conditions where a reveal andplaster stop are required. Can be used tocreate a reveal at ceiling/wall conditions.

Length X Size Y Size10’ 3/4” 3/4”

1”1 1/2”

2”2 1/2”

3”4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 50: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

yx

OptionalVent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

VSMV: Vented Soffit Molding - 16V80● Available With 1/8” x 1” Vent Slots

or No VentsCreates a vented reveal and plaster stopat a wall/ceiling condition.

Note: Available non-vented on specialorder.

Length X Size Y Size10’ 3/4” 2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

ShownVented

Page 51: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

1 3/4”

1/2”

97°

X

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

WS-FCP: Weep Screed for Fiber Cement Panel● Now Available PrimedA decorative reveal that creates a weeppoint that allows moisture to weep outand away from the fiber cement panels.

Length X Size10’ 1/2”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 52: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

y

z

x

Vent Slots

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

WPM: Plaster Soffit Reveal● With 1/8” x 1” Vent SlotsA screed that provides a plaster stop andcreates a reveal at ceiling/wallconditions. Vented to provide free airflow at the perimeter.

Note: Available non-vented on specialorder.

Length X Size Y Size Z Size10’ 3/4” 2” 1”

3”4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 53: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

1 1/2”

X

1 3/4”

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

WHD-FCP: Window Head Drip for Fiber Cement Panel● Now Available PrimedA multi-use drip molding that can beused at window and door heads, as wellas at the foundation.

Length X Size10’ 3/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

NEWNEW

Page 54: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

XDM: X Drywall Corner MoldingA drywall version of the “X” cornermolding that creates a unique “inverse”corner look.

Length X Size Y Size10’ 1/2” 1/2”

5/8” 5/8”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED

Page 55: CR-FCB - Stockton  · PDF file1” X 3/8” 3/8” Y Optional Vent Slots ©2016 Stockton Products. All rights reserved worldwide. CornerAid ®, WeepAid ®, Pozalite ®, ArchAid

x

y

1-87-STOCKTONFAX: (702) 651-0948

[email protected]/stocktonproducts

www.StocktonProducts.com

XPM: X Plaster MoldingCreates a decorative inverted cornerreveal detail for conventional 3-coatstucco at fascia/soffit conditions andaround recessed entryways and doors.Can also be used to trim off the tops ofpony walls and used as a drip edge on afascia/soffit condition.

Length X Size Y Size10’ 3/4” 3/4”

Materials:● Aluminum Alloy (6063 T-5)

Note: Standard length is 10 feet. Additional lengths available upon request.

ASTM Codes:● B136 (Anodize Coating)● B244 (Anodize Coating)● C1063 (Accessories)● D4214 (Paint Films)

KEY

©2018 Stockton Products. All rights reserved worldwide.

CAN BECURVED

CAN BECAN BECURVED CURVED