C.R.& C. S.r.l. - Confindustria CONNEXT Company... · Diapositiva 1 Author Luigi Stucchi Created...
Transcript of C.R.& C. S.r.l. - Confindustria CONNEXT Company... · Diapositiva 1 Author Luigi Stucchi Created...
C.R.& C. S.r.l.Industrial Engineering, Design, Testing and Repair Center
An ISO 9001:2008 Certified Company Nr 50 100 10073
Company Overview
2
Where
Founded in 2004, and based on more than 40 years experience of their engineers with past experience in
Big Original equipment manufacturer, the C.R.& C. core business is focused in Industrial Engineering,
Design, Testing and Repair of almost every Telecomunication Equipments.
CR&C is a team of 54 passionate and motivated high skilled employees plus a support of valuable
consultants!
Quality
Based on our experience, C.R.& C. assures an high service in terms of quality and reliability.
ISO 9001:2015 certified (Nr 50 100 10073)
IPC-A-610; IPC-7711; IPC-7721
100% data collection and traceability
Who
Headquarter and Factory located at Burago di Molgora (Milan area, 20Km from Linate Airport)
Turnover trend
3
2624 2602,37
3322,04
4489
5275
0
1000
2000
3000
4000
5000
6000
2014 2015 2016 2017 2018
Trend Fatturato
2014 2015 2016 2017 2018
Full
Engineering
Service
Support
RF and DIGITAL
ELECTRONIC
DESIGN
TEST
BENCHES
4
• Digital and RF Prototypes
manufacturing
• Prototypes and Pre-Production
Process and Product Validation
• Mass Production Industrialization
• Clean Room facility (Wire Bonding)
• DTC and continuous improvement
methods and programs
• Design for Testability (D4T) and
Design for Manufacturing (D4M)
• Automatic (ATE) / Semi Automatic
Test Benches development
• HW and SW Design, Manufacturing
and Maintenance
• High Frequency and High Power
Radio Knowledge
• Analog and Digital Signal Processing
• Energy and Thermal Management
• Embedded SW/FW Design
• GUI SW
• DATA collection and analysis
NPI
PROTOTYPES
ZERO SERIES
SOFTWARE
COMPETENCE
END OF LIFE
MANAGEMENT
• Components End of Life
management, product re-design and
Update engineering
• Low Yield & Technology Improvement
• Equipment Maintenance Service
REPAIR
CENTRE
and
Refurbishment• CR&C repairs and refurbishes
Microwave Multi-brand products such
as Radio Links; BTS; BSC; Energy
Station. etc….
• R&D Feedbacks for reliability
improvement opportunities
Support capabilities along with the product life cycle
Manufacturing
Process
Enabling
•Digital & RF Design
•FW/SW Design
•Testability (D4T)
•Design Verification
•Prototypes support
DE
VE
LO
PM
EN
T
Test Benches
Design &
Production
Engineering
Change
Verification
New Product
Introduction
End of Life
management
Repair
&
Maintenance
GR
OW
TH
MA
TU
RIT
Y
DE
CL
INE
INT
RO
DU
CT
ION
TIME
5
6
Digital/Analogical and RF HW Design▪ Custom HW design with different options:
▪ Full design, from specification to final product (testing included)
▪ Single task only: specs, schematics, routing, test, …
▪ Different skill and complexity:
▪ Full digital board
▪ Full analogical board and RF
▪ Mixed Digital/Analogical
▪ Power Supply
▪ Industrial standard BUS, IoT, Wireless, etc..
▪ Know-how on most important chip vendor / player
7
Digital Processing Design▪ FPGA design with a wide variety of competence:
▪ Ethernet, USB, SPI, TELECOM, etc…
▪ Digital Processing
▪ Clock distribution/Generations, Synchronizations, PLL, etc…
▪ FPGA MACRO design
▪ SoC design with both competence FPGA & FW/SW
▪ Know-how on all chip vendor / player
Embedded SW/FW Design▪ FW & SW Embedded for different platform
▪ uC (AVR, PIC, CortexM, etc..)
▪ uP (ARM, CortexA, etc..)
▪ We choice the right approach for any applications:
▪ Bare Metal (OS emulate, basic API, etc…)
▪ LightOS or RealTime OS (RTOS, etc..)
▪ Linux Embedded
8
9
Concrete appliances
High Frequency Radio
• TRX 38GHz redesign
• Main subject: RF high freq/Ceramic pcb/SMT/Bare chip
High Power RF
• Broadcasting amplifier @500/1000 MHz / P>10 kw
• Main subject: RF Amplifiers/LDMOS/Air and Liquid cooling
Digital/Analog signal processing
• Fast A to D for laser power sensor
• Main subject: Microntroller/FPGA/DDR3 Memory
IoT/Energy
• Energy station remote monitor and controller
• Main subject: Systems on Module (SoM) / COM Protocols (WM-Bus, ZigBee, VHF, UHF, GSM, GPRS,LTE)
Software Capabilities Overview
▪ Core Applications (custom
specific)
▪ Data Management SW -
GROW
▪ Graphic Front-end
development: Man Machine
& Graphical User Interface
▪ Software development for
Automatic Test Equipment
▪ C, C++, LabView, Visual
Studio (C-sharp e VB)
10
Design Tools available in CR&C
› PCB tools (Cadence, Eagle, «Mentor»)
› FPGA tools (Vivado, Quartus, …)
› Labview
› AutoCAD
› SW embedded (Linux, QT, C, C++, …)
› SW (.Net, C#, C++, VB and …)
› Simulation tools (Spice, AWR, MathLab …)
11
Test Benches + Electronic & RF Design
▪ Industrial & test engineering is the fundamental of CR&C
mindset – in accordance to this, we have been
developing, manufacturing and selling Testing Equipment
for various fields (from energy to RF). We work closely
together with our customers to plan and develop capable
solutions to encompass customized testing
▪ From their origins in the RF field, CR&C’s engineers have
experience from many years in the industry. This
knowledge and expertise is applied to all aspects of the
services as well as to the design of RF, digital and analog
systems. Particularly we design, manufacture and
distribute electronic boards for Control system,
Communication and Power Supply.
12
▪ The internal Clean Room facility plays a key role on the High
Radio Frequency products.
▪ This technology is crucial into several markets such as
Telecommunication, Automotive, Avionics and Biomedical
devices.
▪ Our Clean Room is equipped with the Wedge Bonder Kulicke
and Soffa Model 4526 .
Special asset: Clean Room facility
13
Technologies
▪ Wedge bonder
▪ Thermo bonder
▪ Ribbon bonder
▪ Metallographic
▪ Thin film technology
▪ BGA rework technology
End Of Life Management & Repair Center
14
Due to components obsolescence, production outage and companies
merge and acquisitions, EoL or EoS are more and more common in the ITC
market. In order to face this critical issue CR&C provides its customers with
several tailored solutions according to client/product needs, such as:
▪ Last Buy Order Management, on behalf of our customers we buy
obsolete components to secure products repairability
▪ Refurbished products supply
▪ Update Engineering, to solve unexpected delivery outage or severe
obsolescence we exploit our Electronic and RF design competence to
update the unit circuitry with new components available on the market
Thanks to our Industrial Engineering expertise, we are able to setup the
repair activities of any electronic product.
Our repair portfolio covers a large portion of the entire
telecommunications requirement. CR&C has the in-house capability to
repair thousands different unit types. The complete list of our portfolio is
available on demand.
Test Bench Engineering - Example
15
Semi-Automatic Test Bench for assembled
units level (PCA, on Fixture) with Calibration
and Trouble shooting utility
overturning
fixture
Test Bench Engineering - Example
Functional Test
Bench for assembled
units level (PCA, on
Fixture) and whole
system (in Glass box)
16
17
Test Bench Engineering - Example
Functional Test Bench for assembled
units level (PCA, on Fixture) and whole
system (in Glass box)
Test Bench Engineering - Example
18
Withstanding Voltage Test Bench
Test Bench Engineering - Example
Functional Test
Bench for assembled
units at final level in
lighting business
19
The test bench
performs the following
tests for each lighting
device:
• Ground Bond Safety
• Withstanding Voltage
• Insulation Resistance
• Functional tests in
direct and alternating
voltage
• Management check
of analog, digital,
DALI and DMX
dimmers
Test Bench Engineering - Example
Medium Power
Switching Control
20
Test Bench Manufacturing - Example
ODUs
Automatic
Final Test
▪ Frequency: 15 ÷ 38
GHz
▪ Capacity: 2 ODU at
time
▪ Test Time: 15’
(depending on
measures specs)
▪ Cost may vary
depending on
instruments and
automation level
21
22
Temperature Controlled
System – Optic Devices
Concrete appliances
Test Bench Manufacturing - Example
Burn In Test Bench for Power Supply Cards
23
Test Bench Manufacturing - Example
Camera
Controlled 23
GHz RF
Trimming
▪ Advantage:
▪ Real Time
silver trimming
with no need of
further
intervention
24
Test Bench Manufacturing - Example
RF Module Test bench up
to 80GHz
25
Repair Service and Key Performance Indicators
Average boards
x years repaired
in the last 2 year
→ 11,500 units
(30,000
equivalent PBA)
KPI 2009 2010 2011 2012 2013 2014 2015 2016 2017
Average TAT
(days)12 11 9 7,2 15,7 14,5 16 14,6 13,3
Average TAT
within 21
days (%)
92 92 95 95 94 83* 92 86 87
Average TAT
within 30
days (%)
98 97 98 98 99 96* 98 97 97
Digital Boards
43%
RF Boards
57%
Refurbished unit AreaUnits FY ’15-16-
17
CPE, Router etc. 28739
26
Global Repair Center
▪ Thanks to our Industrial Engineering expertise, we are
able to setup the repair activities of almost all equipments
present in the Telecommunication and Energy Market,
included the design Hardware/Software and
manufacturing of the Test Benches needed.
▪ Our repair portfolio covers a large portion of the entire
telecommunications requirement.
▪ CR&C has the in-house capability to repair thousands
different unit types that belong to many OEM
▪ The complete list of our portfolio
▪ is available on demand.
27
Worldwide Customers
26 Customers 1 Cooperation28
CR&C Location
CR&C NEW HeadQuarter
Via Thomas Edison, 2
20875 Burago di Molgora (MB)
ITALY
Hub
Warehouse
Laboratories
Parking
29
HeadQuarter:
Via Thomas Edison, 2
20875 Burago di Molgora (MB) Italy
Hub Warehouse
Via XXV Aprile 15B
20875 Burago di Molgora (MB) Italy
Sales Contact: [email protected]
Website: http://www.crcsrl.biz
Phone Numbers:
+39 039 6200005
+39 039 6369982