CP-PUMPEN · Model MKPP Dies ist eine dichtungslose, leckagefreie Peripheralrad-Pumpe in IN-LINE...
Transcript of CP-PUMPEN · Model MKPP Dies ist eine dichtungslose, leckagefreie Peripheralrad-Pumpe in IN-LINE...
CP
-PU
MP
EN
MKPPMSKSSZMKMSKPPMSKP
MS
KP
Model MSKP
This sealless leak-free pump isproduced from carbon filled PTFEsolid bar stock material. The pump offers internal and external corrosion resistant on allwetted parts. With carbon filledPTFE, there will be no electrostaticcharge on the plastic parts. The pump is constructed withthick section components elimina-ting the risk of diffusion and giving high security containmentof the pumped product.The pump is used to handle hazar-dous, corrosive, toxic and in-flammable fluids containing of so-lids up to 200 µm.
OptionsPTFE whitePVDF executionPT-100 Temperature protectionShroud protection systemFlange according to ANSI dimension
Technical Data
Capacity Q: up to 80 m3/h
Head H: up to 65 m
Temperature °C: - 20 up to +150
Nom. Press. PN: 8/10 bar
Material: PTFE carbonPTFE white PVDF
-----
Model MSKP
Eine aus Vollkunststoff gefertigtedichtungslose leckagefreie Pumpewelche auch aussen die selben Beständigkeits-Eigenschaften auf-weist wie im flüssigkeitsberührtenTeil . Dadurch, dass PTFE mit Kohleanteil verwendet wird entste-hen keine elektrostatischen Auf-ladungen. Aufgrund der Dickwan-digkeit weist die Pumpe eine relative hohe Diffusionssicherheitauf. Die Pumpe wird zur sicheren Förderung gefährlicher, korrosiver,giftiger und feuergefährlichenFlüssigkeiten mit Feststoffen bis200 µm eingesetzt.
OptionenPTFE weiss PVDF AusführungPT-100 TemperaturüberwachungSpalttopfüberwachungFlansche in ANSI Anschluss-massen
Technische Daten
Förderstrom Q: bis 80 m3/h
Förderhöhe H: bis 65 m
Temperatur °C: - 20 bis +150
Nenndruck PN: 8/10 bar
Werkstoffe: PTFE Kohle PTFE weissPVDF
-----
Modèle MSKP
Pompe entièrement fabriquée en plastique massif, libre de fuiteset sans garniture mécanique, laquelle présente les mêmes pro-priétés de résistance vers l'ex-térieur que dans les parts en contact avec le fluide. Grâce à l'emploi de PTFE contenant desparticules de noir de carbone onévite les charges électrostatiques.En vertu de la grande épaisseur du corps de pompe elle présenteune résistance à la diffusion relativement haute. Cette pompeest employée pour le transva-sement sûr de fluides dangereux,corrosifs, toxiques et inflamma-bles qui contiennent des particulessolides jusqu’à 200 µm.
OptionsPTFE blancFinissage en PVDFSurveillance de températurePT-100Surveillance du capot entrefersBrides de dimensions ANSI
Caractéristiques Techniques
Débit Q jusqu'à: 80 m3/h
Hauteur H jusqu'à: 65 m
Température °C: - 20 à +150
Press. Nom. PN: 8/10 bar
Matériaux: PTFE carbonePTFE blanche PVDF
---
--
Modelo MSKP
Esta bomba libre de escapes, sincierre mecánico y fabricada enplástico, presenta las mismas pro-piedades de resistencia en la parte externa como en la que estáen contacto con el fluido. El empleo de un PTFE que contie-ne partículas de negro de carbónevita las cargas electrostáticas.Debido a su gran espesor la car-casa de esta bomba presenta una resistencia a la difusión relati-vamente grande.Es una bomba concebida para el seguro transvase de fluidos pe-ligrosos, corrosivos, tóxicos e inflamables con sólidos en sus-pensión de hasta 200 µm.
OpcionesPTFE blancoAcabado en PVDFControl de temperatura PT-100Control de la campanaBridas en dimensiones ANSI
Datos Técnicos
Caudal Q: hasta 80 m3/h
Altura H: hasta 65 m
Temperatura °C: - 20 a +150
Pres. Nom. PN: 8/10 bar
Materiales: PTFE carbónPTFE blanco PVDF
-----
PT
FEM
agn
etku
pp
lun
gsp
um
pe
PT
FEse
alle
ssm
agn
etic
dri
vep
um
pP
om
pe
enP
TFE
àen
traî
nem
entm
agn
étiq
ue
Bo
mb
aen
PT
FEd
eac
op
lam
ien
tom
agn
étic
o
MS
KP
P
Model MSKPP
This sealless leak-free peripheralpump is produced from carbon filled PTFE solid bar stock material.The pump offers internal and external corrosion resistant on allwetted parts. With carbon filledPTFE, there will be no electrostaticcharge on the plastic parts. The pump is constructed with thicksection components eliminatingthe risk of diffusion and giving highsecurity containment of the pum-ped product.This pump model is often used forinjection processes because this is a low flow and high head charac-teristic.The pump is used to handle hazardous, corrosive, toxic and in-flammable fluids.
OptionsPTFE whitePVDF executionPT-100 Temperature protectionShroud protection systemFlange according to ANSI dimension
Technical Data
Capacity Q: up to 6 m3/h
Head H: up to 120 m
Temperature °C: - 20 up to +100
Nom. Press. PN: 10 -16 bar
Material: PTFE carbonPTFE white PVDF
-----
Model MSKPP
Eine aus Vollkunststoff gefertigtedichtungslose leckagefreie Peri-pheralrad Pumpe welche auch aus-sen die selben Beständigkeits-Eigenschaften aufweist wie im flüs-sigkeitsberührten Teil. Dadurch, dass PTFE mit Kohleanteil verwen-det wird entstehen keine elektrostatischen Aufladungen. Aufgrund der Dickwandigkeit weistdie Pumpe eine relativ hohe Diffusionssicherheit auf. Dieser Pumpentyp wird für kleinen Förderstrom und relativ hohen Differenzdruck eingesetzt. Im klassischen Einsatz wirdsie als Einspritzpumpe verwendet.Die Pumpe wird zur sicheren Förderung gefährlicher, korrosiver,giftiger und feuergefährlichenFlüssigkeiten eingesetzt.
OptionenPTFE weiss PVDF AusführungPT-100 TemperaturüberwachungSpalttopfüberwachungFlansche in ANSI Anschluss-massen
Technische Daten
Förderstrom Q: bis 6 m3/h
Förderhöhe H: bis 120 m
Temperatur °C: - 20 bis +100
Nenndruck PN: 10 bis 16 bar
Werkstoffe: PTFE Kohle PTFE weissPVDF
----
Modèle MSKPP
Pompe à turbine périphérique en-tièrement fabriquée en plastiquemassif, libre de fuites et sans gar-niture mécanique, laquelle présente les mêmes propriétés de résistance vers l'extérieur que dans les parts en contact avec le fluide. Grâce à l'emploi de PTFE contenant des particules de noirde carbone on évite les chargesélectrostatiques. En vertu de la grande épaisseur du corps depompe elle présente une rési-stance à la diffusion relativementhaute. Cet modèle de pompe est spécialement indiqué pour pe-tits débits et hautes pressions différentielles, en étant l'applicati-on la plus typique comme injec-teur. Cette pompe est employéepour le transvasement sûr de fluides dangereux, corrosifs, toxi-ques et inflammables.
OptionsPTFE blancFinissage en PVDFSurveillance de températurePT-100Surveillance du capot entrefersBrides de dimensions ANSI
Caractéristiques Techniques
Débit Q jusqu'à: 6 m3/h
Hauteur H jusqu'à: 120 m
Température °C: - 20 à +100
Press. Nom. PN: 10 -16 bar
Matériaux: PTFE carbonePTFE blanche PVDF
---
--
Modelo MSKPP
Es una bomba completamente de plástico, con turbina periféricay sin cierre mecánico, exenta deescapes, la cual presenta las mis-mas propiedades de resistencia en la parte externa como en la queestá en contacto con el fluido. El empleo de un PTFE que contienepartículas de negro de carbónevita las cargas electrostáticas.Debido a su gran espesor la carca-sa de esta bomba presenta una resistencia a la difusión relati-vamente grande.Este tipo de bomba es especial-mente indicado para pequeñoscaudales y grandes presiones dife-renciales, siendo su aplicaciónmás clásica la de bomba inyectora.Está concebida para un transvaseseguro de fluidos peligrosos, corrosivos, tóxicos e inflamables.
OpcionesPTFE blancoAcabado en PVDFControl de temperatura PT-100Control de la campana Bridas en dimensiones ANSI
Datos Técnicos
Caudal Q: hasta 6 m3/h
Altura H: hasta 120 m
Temperatura °C: - 20 a +100
Pres. Nom. PN: 10 -16 bar
Materiales: PTFE carbónPTFE blanco PVDF
-----
PT
FEP
erip
her
alra
dP
um
pe
mag
net
gek
up
pel
tP
TFE
Per
iph
eral
seal
less
mag
net
icd
rive
pu
mp
Pom
peen
PTFE
àtu
rbin
epé
riph
ériq
ueet
entr
aîne
men
tmag
nétiq
ueB
omba
enPT
FEco
ntu
rbin
ape
rifé
rica
yac
opla
mie
nto
mag
nétic
o
SZ
MK
Model SZMK
This is a sealless, "IN-LINE" leak-free magnetic drive centrifu-gal pump design. The pump isconstructed with all wetted partsmanufactured from solid barstock. The use of bar stock offersthe advantages of high purity and inclusion free materials in a widevariety of material options.The "IN LINE" vertical design offers a major advantage regar-ding space and installation cost.
OptionsANSI Flanges
Technical Data
Capacity Q: up to 30 m3/h
Head H: up to 16 m
Temperature °C: -100 bis +250
Nom. Press. PN: 16 bar
Material: 1.4435 (316ss) spec. materials upon request
-
Model SZMK
Dies ist eine dichtungslose, lecka-gefreie Magnetkupplungspumpe inIN-LINE Bauart.Die flüssigkeitsberührten Gehäu-seteile werden aus Walz-Rohlin-gen herausgearbeitet. Die Verwen-dung derartiger Körper gewährt Porenfreiheit, Dichtheit,Analysensicherheit und er-möglicht den Einsatz von variablenWerkstoffen.Die vertikale IN-LINE Bauart derPumpe wirkt sich vorteilhaft auf den Platzbedarf und die Instal-lation aus.
OptionenANSI Flansche
Technische Daten
Förderstrom Q: bis 30 m3/h
Förderhöhe H: bis 16 m
Temperatur °C: -100 bis +250
Nenndruck PN: 16 bar
Werkstoffe: 1.4435 übrige auf Anfrage
-
Modèle SZMK
Pompe métallique de type IN-LINE, libre de fuites et sans gar-niture mécanique.Les parts du corps de pompe en contact avec le fluide sont fabri-quées à partir de barres d'acierbrut. L’emploi de ces pièces garan-tit l’absence de porosités,l'étanchéité, la sécurité de analyseet rend possible un large choix de matériaux. Le mode de construction verticalIN-LINE intervient avantageu-sement dans l'encombrement etdans l'installation.
OptionsBrides ANSI
Caractéristiques Techniques
Débit Q jusqu'à: 30 m3/h
Hauteur H jusqu'à: 16 m
Température °C: -100 bis +250
Press. Nom. PN: 16 bar
Matériaux: 1.4435 (316ss), autres matériaux disponi-bles suivant demande
-
Modelo SZMK
Se trata de una bomba de tipo de construcción IN-LINE exenta deescapes y sin cierre mecánico.Las partes de la carcasa en contac-to con el fluido se fabrican partien-do de barras de acero. El empleode este tipo de material garantizala ausencia de poros, estanquei-dad , seguridad de análisis y posi-bilita la aplicación de materialesmuy variados. El modo de colocación vertical IN-LINE incide ventajosamente enel espacio necesario y en su ins-talación.
OpcionesBridas en dimensiones ANSI
Datos Técnicos
Caudal Q: hasta 30 m3/h
Altura H: hasta 16 m
Temperatura °C: -100 bis +250
Pres. Nom. PN: 16 bar
Materiales: 1.4435 (316ss), otros materiales sobre demanda
-
IN-L
INE
Mag
net
kup
plu
ng
spu
mp
em
etal
lisch
IN-L
INE
seal
less
mag
net
icd
rive
pu
mp
met
allic
Po
mp
em
étal
liqu
eIN
-LIN
Eà
entr
aîn
emen
tmag
nét
iqu
eB
om
ba
met
álic
aIN
-LIN
Ed
eac
op
lam
ien
tom
agn
étic
o
MK
PP
IN-L
INE
Per
iph
eral
rad
Pu
mp
em
agn
etg
eku
pp
elt
IN-L
INE
Per
iph
eral
seal
less
mag
net
icd
rive
pu
mp
Pom
pem
étal
lique
IN-L
INE
àtu
rbin
epé
riph
ériq
ueet
entr
aîne
men
tmag
nétiq
ueB
omba
met
álic
aIN
-LIN
Eco
ntu
rbin
ape
rifé
rica
yac
opla
mie
nto
mag
nétic
o
Model MKPP
This is a sealless, "IN-LINE" leak-free peripheral magnetic drivecentrifugal pump design. Thepump is constructed with all wet-ted parts manufactured from solid bar stock. The use of bar stock offers the advantages of high purity andinclusion free materials in a widevariety of material options.The "IN LINE" vertical design of-fers a major advantage regardingspace and installation cost.This pump model is often used forinjection processes because this is a low flow and high head charac-teristic.
OptionsANSI Flanges
Technical Data
Capacity Q: up to 4 m3/h
Head H: up to 40 m
Temperature °C: -100 bis +250
Nom. Press. PN: 16 bar
Material: 1.4435 (316ss), 1.4539 (Alloy 20) Hastelloy
-
Model MKPP
Dies ist eine dichtungslose, leckagefreie Peripheralrad-Pumpein IN-LINE Bauart.Die flüssigkeitsberührten Gehäuse-teile werden aus Walz-Rohlingenherausgearbeitet. Die Verwendungderartiger Körper gewährt Poren-freiheit, Dichtheit, Analysensicher-heit und ermöglicht den Einsatzvon variablen Werkstoffen.Dieser Pumpentyp wir für kleinenFörderstrom und relativ hohen Differenzdruck eingesetzt. Im klassischen Einsatz wird sie als Einspritzpumpe verwendet.Die vertikale IN-LINE Bauart derPumpe wirkt sich vorteilhaft aufden Platzbedarf und der Installationaus.
OptionenANSI Flansche
Technische Daten
Förderstrom Q: bis 4 m3/h
Förderhöhe H: bis 40 m
Temperatur °C: -100 bis +250
Nenndruck PN: 16 bar
Werkstoffe: 1.4435(316ss), 1.4539 (Alloy 20) Hastelloy
-
Modèle MKPP
Pompe métallique de type IN-LINE à turbine périphérique,libre de fuites et sans garniture mécanique.Les parts du corps de pompe en contact avec le fluide sont fabri-quées à partir de barres d'acierbrut. L'emploi de ces pièces garan-tit l'absence de porosités,l'étanchéité, la sécurité de analyseet rend possible un large choix de matériaux.Le mode de construction verticalIN-LINE intervient avantageu-sement dans l'encombrement etdans l'installation.
OptionsBrides ANSI
Caractéristiques Techniques
Débit Q jusqu'à: 4 m3/h
Hauteur H jusqu'à: 40 m
Température °C: -100 bis +250
Press. Nom. PN: 16 bar
Matériaux: 1.4435 (316ss), 1.4539 (Alloy 20) Hastelloy
-
Modelo MKPP
Es una bomba de tipo de construc-ción IN-LINE con turbina perifé-rica, exenta de escapes y sin cierremecánico. Las partes de la carcasaen contacto con el fluido se fabrican partiendo de barras deacero. El empleo de este tipo de material garantiza la ausencia deporos, estanqueidad, seguridad de análisis y posibilita la aplicaciónde materiales muy variados.Este tipo de bomba es especial-mente indicado para pequeñoscaudales y grandes presiones dife-renciales, siendo su aplicaciónmás clásica la de bomba inyectora.El modo de colocación vertical IN-LINE incide ventajosamente enel espacio necesario y en su ins-talación.
OpcionesBridas en dimensiones ANSI
Datos Técnicos
Caudal Q: hasta 4 m3/h
Altura H: hasta 40 m
Temperatura °C: -100 bis +250
Pres. Nom. PN: 16 bar
Materiales: 1.4435 (316ss), 1.4539 (Alloy 20) Hastelloy
-
MS
KS
Model MSKS
This sealless leak-free self primingpump is produced from carbon filled PTFE solid bar stock material.The pump offers internal and external corrosion resistant on allwetted parts. With carbon filledPTFE, there will be no electrostaticcharge on the plastic parts. The pump is constructed with thicksection components eliminatingthe risk of diffusion and giving highsecurity containment of the pum-ped product.The pump is used to handle hazardous, corrosive, toxic and in-flammable fluids.
OptionsPTFE whitePVDF executionPT-100 Temperature ProtectionShroud protection systemFlange according to ANSI dimension
Technical Data
Capacity Q: up to 2.5 m3/h
Head H: up to 25 m
Temperature °C: - 50 bis +150
Nom. Press. PN: 10 bar
Material: PTFE carbonPTFE white PVDF
Prim. head up to: 5.5 mH20
-----
Model MSKS
Eine aus Vollkunststoff gefertigtedichtungslose leckagefreie selbstansaugende Pumpe welcheauch aussen die selben Bestän-digkeits-Eigenschaften aufweist wieim flüssigkeitsberührten Teil. Dadurch, dass PTFE mit Kohleanteilverwendet wird entstehen keineelektrostatischen Aufladungen.Aufgrund der Dickwandigkeit weistdie Pumpe eine relative hohe Diffusionssicherheit auf.Die Pumpe wird zur sicheren Förderung gefährlicher, korrosiver,giftiger und feuergefährlichenFlüssigkeiten eingesetzt.
OptionenPTFE weiss PVDF AusführungPT-100 TemperaturüberwachungSpalttopfüberwachungFlansche in ANSI Anschluss-massen
Technische Daten
Förderstrom Q: bis 2.5 m3/h
Förderhöhe H: bis 25 m
Temperatur °C: - 50 bis +150
Nenndruck PN: 10 bar
Werkstoffe: PTFE Kohle PTFE weissPVDF
Ansaughöhe bis: 5.5 m H20
-----
Modèle MSKS
Pompe autoamorçante entière-ment fabriquée en plastique massif, libre de fuites et sans gar-niture mécanique, laquelle présente les mêmes propriétés derésistance vers l’extérieur quedans les parts en contact avec lefluide. Grâce à l’emploi de PTFE contenant des particules denoir de carbone on évite les charges électrostatiques. En vertude la grande épaisseur du corpsde pompe elle présente une résistance à la diffusion relative-ment haute. Cette pompe est employée pour le transvasementsûr de fluides dangereux, corro-sifs, toxiques et inflammables.
OptionsPTFE blancFinissage en PVDFSurveillance de températurePT-100Surveillance du capot entrefersBrides de dimensions ANSI
Caractéristiques Techniques
Débit Q jusqu'à: 2.5 m3/h
Hauteur H jusqu'à: 25 m
Température °C: - 50 bis +150
Press. Nom. PN: 10 bar
Matériaux: PTFE carbonePTFE blanche PVDF
Ht. d'asp. jusqu'à: 5.5 mH20
---
-
Modelo MSKS
Se trata de una bomba autoceban-te completamente fabricada en plástico, sin cierre mecánico yexenta de escapes, la cual presen-ta las mismas propiedades de resistencia en la parte externacomo en la que está en contactocon el fluido. El empleo de un PTFE que contiene partículasde negro de carbón evita las cargas electrostáticas. Debido a su gran espesor la carcasa de estabomba presenta una resistencia a la difusión relativamente grande.Es una bomba concebida para un transvase seguro de fluidos peligrosos, corrosivos, tóxicos einflamables.
OpcionesPTFE blancoAcabado en PVDFControl de temperatura PT-100Control de la campanaBridas en dimensiones ANSI
Datos Técnicos
Caudal Q: hasta 2.5 m3/h
Altura H: hasta 25 m
Temperatura °C: - 50 bis +150
Pres. Nom. PN: 10 bar
Materiales: PTFE carbónPTFE blanco PVDF
Altura de asp.hasta 5.5 mH20
-----
PT
FEse
lbst
ansa
ug
end
eM
agn
etku
pp
lun
gsp
um
pe
PT
FEse
lf-p
rim
ing
seal
less
mag
net
icd
rive
pu
mp
Pom
peen
PTFE
auto
amor
çant
eà
entr
aîne
men
tmag
nétiq
ueB
omba
enPT
FEau
toce
bant
ey
deac
opla
mie
nto
mag
nétic
o
Model MSKP Model MSKPP
50H
Z/1
450
min
-1
PTFE Magnetkupplungspumpe PTFE sealless magnetic drive pumpPompe en PTFE à entraînement magnétique Bomba en PTFE de acoplamiento magnético
----
PTFE Peripheralrad Pumpe magnetgekuppeltPTFE Peripheral sealless magnetic drive pumpPompe en PTFE à turbin périphérique et entraînement magnétique Bomba en PTFE con turbina periférica y acoplamiento magnético
--
-
-
50H
Z/2
900
min
-1
50H
Z/2
900
min
-1
Model SZMK Model MKPP Model MSKS
50H
Z/2
900
min
-1
50H
Z/2
900
min
-1
50H
Z/2
900
min
-1
IN-LINE Magnetkupplungspumpe metallischIN-LINE sealless magnetic drive pump metallicPompe métallique IN-LINE à entraînementmagnétique Bomba metálica IN-LINE de acoplamientomagnético
--
-
-
IN-LINE Peripheralrad-Pumpe magnet-gekuppeltIN-LINE Peripheral sealless magnetic drive pumpPompe métallique IN-LINE à turbine périphérique et entraînement magnétiqueBomba metálica IN-LINE con turbina periférica y acoplamiento magnético
-
-
-
-
PTFE selbstansaugende Magnet-kupplungspumpePTFE self-priming sealless magnetic drive pumpPompe en PTFE autoamorçante à entraînement magnétiqueBomba en PTFE autocebante y de acopla-miento magnético
-
-
-
-
Ko
nze
pt&
Ges
talt
un
g:
Han
ns
Sch
mid
Gra
fikD
esig
nB
aden
CP Pumpen AGIm Brühl4800 ZofingenSwitzerland
Tel. +41 (0)62 746 85 85Fax +41 (0)62 746 85 [email protected]
CP Pumpen GmbHPfälzer Ring 8-1068766 HockenheimGermany
Tel. +49 (0)62 05 20 41 0Fax +49 (0)62 05 20 41 [email protected]
CP
-05
D|E
|F|S
02|0
9