COVERING PLATES COMBINATION T2 - · PDF fileCOVERING PLATES COMBINATION TABLE ... Mechanical...

COVERING PLATES COMBINATION TABLEOMEGA 20 AND EPSILON 30 MODULES

(*) when using 3 modules, the one in the middle does not have labelling facilities

OMEGA 20 ADAPTATION RING(2.5 mm)

45 SERIESCOVERING PLATE


ADAPTATION RING(10 mm)

EPSILON 30

2X

2X

2X

1X 1X

1X

1X

3X (*)

COVERING PLATES COMBINATION TABLEOMEGA 45 AND EPSILON 45 MODULES

OMEGA 45 45 SERIESCOVERING PLATE

EPSILON 45

OMEGA 45 - ANGLED


Remarkusing 45 Series Covering Plates with integrated Outlet Labelling System inconjunction with Connector Modules with integrated Outlet Labelling Systemleads to duplication of labelling

60 Series Covering Plates with integrated Outlet Labelling System have beendesigned for use with the Omega 20 and Epsilon 30 modules. They do notnormally accommodate other Connector Modules

OMEGA 20TWISTED PAIR MODULE

OMEGA 20 Blank InsertACS-420.001/002

▼ Smallest screened double outlet module available.▼ 4 to 6 RJ45 connections are possible in 45 series or 60 series covering plates.▼ Omega 20 module dimensions (20x45mm) for mounting in 45 and 60 series

frontplates.▼ Category 5 module, > 40 dB NEXT loss at 100 MHz (all pair combinations).▼ Colour coding in conformity with cable colour coding.▼ RJ45 ISO 8877 compliant modules with colour coded T 568B and T 568A

pin configuration.▼ Accepts wire diameters from 0.4 to 0.8 mm (26 to 20 AWG).▼ Versions available : • double RJ45 screened module (2 x 4 pairs)

• blank insert▼ Enhanced EMC performance from fully screened construction and low

impedance screen termination.▼ Omega modules are Delta or UL verified.▼ Adaptation rings available for third party faceplates.▼ Fast and easy cable termination on the module before fitting into the outlet.▼ Integrated cable strain relief and shield termination.▼ Omega 20 modules fit into a complete range of international Covering Plates.

Refer to the Covering Plates Combination Table for detailed information.▼ All plastic material is UL 94V0.

OMEGA 20 Screened RJ45 ModuleACS-420.011/012

ALCATEL CABLING SYSTEMSBd.Paepsemlaan 16 - 1070 Brussels - BelgiumTel.: 32.2.556.08.50 - Fax: 32.2.556.49.50

Connector module (mm/inches) h x w x d 20 x 45 x 55 / 0.79 x 1.77 x 2.17Connections number 2 per module (2 x 4 pair)

type RJ 45, screenedColour standard ivory (RAL 1013)

option white (RAL 9010)

Technical Performances

OMEGA 20TWISTED PAIR MODULE

D

SE-3

51-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

Electrical Performances

Max Att. at 100 MHz (dB) ≤ 0.4Min. Next loss (dB) 40Min. Return loss (dB) 14

Ordering Codes

WhiteIvory

2 RJ45 screened Blank insertACS-420.011 ACS-420.001ACS-420.012 ACS-420.002

Integration of Omega 20 modules into several types of Covering Plates.

side view

2x Omega 20 module in45 Series Covering Plate(+ 2x Adaptation Ring 2.5mm)

3x Omega 20 module in60 Series Covering Plate

OMEGA 20OPTICAL FIBER MODULE

▼ Omega 20 module dimensions (20x45mm) for easy mounting in 45 and 60 series frontplates .

▼ Versions available : • 2 ST adapters• 2 SC adapters• blank insert

▼ Omega 20 modules fit into a complete range of international Covering Plates. Refer to the Covering Plates Combination Table for detailed information.

▼ All plastic material is UL 94V0.

Omega 20 Blank InsertACS-420.001

Omega 20 ST moduleACS-420.021

Omega 20 SC moduleACS-420.031

Integration of Omega 20 modules into several types of Covering Plates.


OMEGA 20OPTICAL FIBER MODULE


Connector module h x w x d (mm/inches) 20 x 45 x 26.5 / 0.79 x 1.77 x 1.04Adapters number & type 2 x ST, 2 x SC, blank insertColour standard ivory (RAL 1013)

option white (RAL 9010)Insertion loss dB < 0.5Mechanical durability matings > 500 (according to IEC 871-1)

Ordering Codes

ACS-420.001ACS-420.002

SINGLEMODEwhiteivory

ACS-420.021ACS-420.023

ACS-420.031ACS-420.033

2 x ST 2 x SC Blank insert

ACS-420.001ACS-420.002

MULTIMODEwhiteivory

ACS-420.022ACS-420.024

ACS-420.032ACS-420.034

2 x ST 2 x SC Blank insert

side view

D

SE-3

52-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

3x Omega 20 module in60 Series Covering Plate

OMEGA 20ANGLED CONNECTOR MODULE

FOR 45 SERIES COVERING PLATES

▼ The Omega 20 angled connector modules accommodate the Omega 20 rangeof products.

▼ For specific information on the Omega 20 range, refer to the corresponding datasheets (Copper or Optical Fiber).

▼ Inclined faceplate:• Protects cords• Prevents entry of dust

▼ Integrated Outlet Labelling System for easy management and identification• Icons supplied : telephone, PC, RX and TX• Icons fit on hinged cover

▼ These modules fit into a complete range of international Covering Plates.Refer to the Covering Plates Combination Table for detailed information.


Mounted in a plain covering plate


OMEGA 20ANGLED CONNECTOR MODULE

FOR 45 SERIES COVERING PLATES

D

SE-3

56-0

997-

V2.0

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.


Central part h x w 20 x 45 mm (for Omega 20 modules)Connector module h x w x d (mm/inches) 45 x 45 x 40 / 1.77 x 1.77 x 1.58Colour standard ivory (RAL 1013)


Ordering Codes

Angled OutletWhiteACS-422.003

IvoryACS-422.004

Omega 20 connector module See specific datasheet

OMEGA 45 TWISTED PAIR CONNECTOR MODULE WITH

INTEGRATED OUTLET LABELLING SYSTEM

▼ Full Category 5 outlets with better than 40 dB NEXT at 100 MHz betweenevery pair combination.

▼ RJ45 ISO 8877 compliant outlets with T 568B and T 568A pin configuration.▼ Fast Foolproof installation:

• IDC contacts at frontside for convenient installation• IDC colour coding in conformity with cable colour coding

▼ Integrated Outlet Labelling System for easy management and identification• Icons supplied : telephone, PC, RX and TX• Icons fit on hinged cover

▼ Versions available : single and double RJ45 connectors, screened and unscreened.▼ Country specific covering plates adapt to national requirements and designs.▼ The connector module is designed to be compatible with any covering plate

by using adaptation rings if required.▼ These modules fit into a complete range of international Covering Plates.



D

SE-3

57-0

997-

V2.0

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.



Connector unit (mm/inches) h x w x d 45 x 45 x 16 / 1.77 x 1.77 x 0.63Connections number one or two

type RJ45 unscreened or screenedColour standard ivory (RAL 1013)

option white (RAL 9010)Options shutter to protect the RJ45 plug


Ordering CodesOmega Outlet Connector Module with integrated Outlet Labelling System

Single outlet assemblyUnscreenedScreened

white ivoryNo shutter Shutter No shutter ShutterACS-461.100 ACS-462.100 ACS-461.101 ACS-462.101ACS-461.110 ACS-462.110 ACS-461.111 ACS-462.111

Double outlet assemblyUnscreenedScreened

white ivoryNo shutter Shutter No shutter ShutterACS-461.200 ACS-462.200 ACS-461.201 ACS-462.201ACS-461.210 ACS-462.210 ACS-461.211 ACS-462.211

OMEGA 45 TWISTED PAIR CONNECTOR MODULE WITH


OMEGA 45EMC KIT FOR 45 SERIES COVERING PLATES

▼ The EMC kit consists of a metal housing closed by a front metallic plate,the whole forming a Faraday cage.

▼ This metallic ring with removable corners is also designed for the Alcatel twisted pair Omega 45 modules (45 x 45).

▼ Can be mounted in a standard concealed mounting box.▼ The kit includes a plastic covering plate.▼ These modules fit into a complete range of international Covering Plates.



OMEGA 45EMC KIT FOR 45 SERIES COVERING PLATES

D

SE-3

58-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

Dimensions (mm/inches) Europe type 80 x 80 / 3.15 x 3.15UK type 86 x 86 / 3.38 x 3.38


Ordering Codes

Europe

UK

squaredACS-200.009ACS-200.008ACS-220.009ACS-220.008ACS-200.025ACS-200.024ACS-220.025ACS-220.024

roundedCorners

IvoryWhiteIvoryWhiteIvoryWhiteIvoryWhite

ColourRJ45

11221122

ACS-200.007ACS-200.006ACS-220.007ACS-220.006ACS-200.023ACS-200.022ACS-220.023ACS-220.022

ACS-200.006 ACS-200.008

45 SERIES COVERING PLATESPLAIN VERSION

concealed

surface mounted

▼ The 45 Series Covering Plates can accommodate a whole range of connectormodules. Detailed information on possible combinations can be found in the Covering Plates Combination Table.

▼ An adaptation ring allows Omega 20 modules to be integrated in the45 Series Covering Plates.



Technical PerformancesCovering plates (concealed)

Colour standard ivory (RAL 1013)option white (RAL 9010)

Size (mm/inches) concealed adapted to country specificssurface mounted 81.8 x 81.8 x 40 / 3.22 x 3.22 x 1.57

For UK and USA type the covering plates are delivered with screws.All covering plates are delivered with metal flush mounting ring except USA type.

Ordering Codes45 Series Covering plates (concealed)

Remark :

ACS-200.003ACS-200.002ACS-200.005ACS-200.004ACS-200.015ACS-200.014ACS-200.017ACS-200.016ACS-200.027ACS-200.026

Europe

UK

USA

IvoryWhiteIvoryWhiteIvoryWhiteIvoryWhiteIvoryWhite

80 x 8080 x 8080 x 8080 x 8086 x 8686 x 8686 x 8686 x 86115 x 70.5115 x 70.5

roundedroundedsquaredsquaredroundedroundedsquaredsquaredsquaredsquared

Size (mm) Corners CodeColour

45 SERIES COVERING PLATESPLAIN VERSION

D

SE-3

62-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

Colour

45 Series Covering plates (surface mounted)

IvoryACS-200.105

WhiteACS-200.106

Omega 20 Module Adaptation Ring for 45 Series covering plates

Adaptation Ring2.5mm

IvoryACS-421.002

WhiteACS-421.001

45 SERIES COVERING PLATESWITH INTEGRATED OUTLET LABELLING SYSTEM

▼ The 45 Series Covering Plates can accommodate a whole range of connector modules. Detailed information on possible combinations can be found in the Covering Plates Combination Table.

▼ An adaptation ring allows Omega 20 modules to be integrated in the 45 SeriesCovering Plates.

▼ Integrated Outlet Labelling System for easy management and identification• Icons supplied : Telephone and PC, RX and TX• Icons fit on hinged cover


45 Series covering plate (45 x 45 mm)with Integrated Outlet Labelling System




Size mm / inches 115 x 70.5 x 14 / 4.53 x 2.77 x 0.55


Ordering Codes

white ivory45x45 mm (1.77" x 1.77") ACS-422.001 ACS-422.002

45 Series Covering Plate with integrated Outlet Labelling System

D

SE-3

60-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

Omega 20 Module Adaptation Ring for 45 Series Covering Plate

Adaptation Ring white ivory2.5mm ACS-421.001 ACS-421.002

▼ The 45 Series Covering Plates can accommodate a whole range of connectormodules.

▼ In order to accommodate connector modules, adaptation rings are available.▼ An adaptation ring allows 2 Omega 20 modules to be integrated in the

45 Series Covering Plates.▼ All plastic material is UL 94V0.

45 SERIES COVERING PLATESCOUNTRY SPECIFIC & ADAPTATION RINGS


45 SERIES COVERING PLATESCOUNTRY SPECIFIC & ADAPTATION RINGS

ELKOJUNGNIKOPEHA*Bush & JaegerGIRA

Adaptation Ring Adaptation Kit (Ring + Metal Flush Mounting)White Ivory White IvoryACS-800.310 ACS-800.311 ACS-210.201 ACS-210.202ACS-800.340 ACS-800.341 ACS-210.231 ACS-210.232ACS-800.320 ACS-800.321 ACS-210.211 ACS-210.212ACS-800.330 ACS-800.331 ACS-210.221 ACS-210.222 ------- ACS-800.351 ------- ACS-210.242ACS-800.360 ACS-800.361 ACS-210.251 ACS-210.252

Ordering Codes

D

SE-3

61-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

* only for single covering plates


▼ The 60 Series Covering Plates can accommodate a whole range of connector modules. Detailed information on possible combinations can be found in the Covering Plates Combination Table.

▼ Integrated Outlet Labelling System for easy management and identification• Icons supplied : Telephone, PC, RX and TX• Icons fit on hinged cover


60 Series covering plate (60 x 45 mm)with integrated Outlet Labelling System




Size mm/inches 115 x 70.5 x 14 / 4.53 x 2.77 x 0.55


Ordering Codes

white ivory60 x 45 mm (2.36" x 1.77") ACS-423.001 ACS-423.002

60 Series Covering Plate with integrated Outlet Labelling System

D

SE-3

63-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

Epsilon 30 modules in a60 series covering plate

Omega 20 modules in a60 series covering plate

Adaptation Ring10 mm

whiteACS-421.003

ivoryACS-421.004

Adaptation Ring for 60 Series Covering Plate

EPSILONTWISTED PAIR CONNECTOR

▼ The Epsilon twisted pair connector integrates a high quality Category 5RJ45 jack and an IDC connection device.

▼ Integration provides reduced space requirements.▼ Versions available:

• Unscreened Epsilon connector• Screened Epsilon connector• EMC Epsilon connector

▼ Full Category 5 module with better than 40 dB NEXT loss at 100 MHz betweenevery pair combination.

▼ RJ45 ISO 8877 compliant module with colour coded T 568B pin configuration.▼ Accepts wire diameters from 0.3 to 0.8 mm (28 to 20 AWG)▼ Epsilon connectors are Delta qualified or UL verified.▼ The hand held comfort tool provides fast & easy cable termination.

Unscreened Screened EMC



Connector dimensions h x w x d (mm/inches) 24 x 19.5 x 35 / 0.95 x 0.77 x 1.38Connections type RJ 45 with integrated IDC deviceModels available unscreened, screened, EMC


EPSILONTWISTED PAIR CONNECTOR

D

SE-3

54-0

997-

V2.0

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

for cabling the Epsilon Connector for cabling the Omega 20 module

Epsilon termination tool

Cable termination comfort tool

Ordering Codes

Unscreened Epsilon connectorScreened Epsilon connectorEMC Epsilon connector

ACS-410.010ACS-410.020ACS-410.030

AccessoriesEpsilon termination toolCable termination comfort toolDust cap

ACS-410.090ACS-410.091ACS-410.050


EPSILON 30TWISTED PAIR CONNECTOR MODULE

▼ Connector module for Epsilon twisted pair connectors.▼ Full Category 5 module with better than 40 dB NEXT loss at 100 MHz between

every pair combination.▼ RJ45 ISO 8877 compliant module with colour coded T 568A and T 568B pin

configuration.▼ Versions available : • 2 unscreened Epsilon connectors

• 2 screened Epsilon connectors• 2 EMC Epsilon connectors

▼ Accepts wire diameters from 0.32 to 0.8mm (28 to 20 AWG).▼ All plastic material is UL 94V0.▼ Agencies : Delta qualified or UL verified.

Blank Insert for unused port inEpsilon moduleACS-410.040

Epsilon 30 module in a60 Series covering plate

Epsilon 30 empty moduleACS-410.100


Module dimensions (mm/inches) h x w x d 30 x 45 x 13 / 1.18 x 1.77 x 0.51Connections connector type Epsilon : RJ 45 with integrated IDC deviceModels available 2x unscreened/2x screened/2x EMC (2 x 4 pair)Colour standard ivory (RAL 1013)




D

SE-3

55-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

Double outlet assemblyEpsilon 30 Module 2 x unscreenedEpsilon 30 Module 2 x screenedEpsilon 30 Module 2 x EMC

white ivoryACS-410.210 ACS-410.211ACS-410.220 ACS-410.221ACS-410.230 ACS-410.231

AccessoriesEpsilon termination toolCable termination comfort tool

ACS-410.090ACS-410.091

Epsilon unscreened connectorEpsilon screened connectorEpsilon EMC connector

ACS-410.010ACS-410.020ACS-410.030

ComponentsEmpty Epsilon 30 moduleBlank insert for unused port

white ivoryACS-410.100 ACS-410.101ACS-410.040 ACS-410.041

Ordering Codes

Single outlet assemblyEpsilon 30 Module 1 x unscreenedEpsilon 30 Module 1 x screenedEpsilon 30 Module 1 x EMC

white ivoryACS-410.110 ACS-410.111ACS-410.120 ACS-410.121ACS-410.130 ACS-410.131




WITH INTEGRATED OUTLET LABELLING SYSTEM

▼ Full Category 5 module with better than 40 dB NEXT loss at 100 MHz betweenevery pair combination.

▼ RJ45 ISO 8877 compliant module with colour coded T 568A and T 568B pin configuration.

▼ Epsilon connectors are Delta or UL verified.▼ Integrated Outlet Labelling System for easy management and identification

• Icons supplied : telephone, PC• Icons fit on hinged cover

▼ Versions available, including full EMC screened :• 2 x unscreened Epsilon connectors• 2 x screened Epsilon connectors• 2 x EMC Epsilon connectors

▼ Country specific covering plates adapt to national requirements and designs.▼ These connector modules fit in a complete range of international Covering Plates.


Epsilon 45 empty module withintegrated Outlet Labelling System Blank Insert for unused port

in Epsilon module

Connector unit (mm/inches) h x w x d 45 x 45 x 18 / 1.77 x 1.77 x 0.71Connections number 2 per module

type unscreened/ EMC / screened/ fillerColour standard ivory (RAL 1013)



EPSILON 45TWISTED PAIR CONNECTOR MODULE WITH



D

SE-3

59-0

598-

V2.1

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

AccessoriesEpsilon termination toolCable termination comfort tool

ACS-410.090ACS-410.091



Ordering Codes

Single outlet assemblyEpsilon 45 Module 1 x unscreenedEpsilon 45 Module 1 x screenedEpsilon 45 Module 1 x EMC

ivoryNo shutter ShutterACS-411.111 ACS-412.111ACS-411.121 ACS-412.121ACS-411.131 ACS-412.131

whiteNo shutter ShutterACS-411.110 ACS-412.110ACS-411.120 ACS-412.120ACS-411.130 ACS-412.130

Double outlet assemblyEpsilon 45 Module 2 x unscreenedEpsilon 45 Module 2 x screenedEpsilon 45 Module 2 x EMC

No shutter ShutterACS-411.211 ACS-412.211ACS-411.221 ACS-412.221ACS-411.231 ACS-412.231

No shutter ShutterACS-411.210 ACS-412.210ACS-411.220 ACS-412.220ACS-411.230 ACS-412.230

whiteNo shutter ShutterACS-411.000 ACS-412.000

ComponentsEmpty Epsilon 45 module

ivoryNo shutter ShutterACS-411.001 ACS-412.001

Epsilon unscreened connectorEpsilon screened connectorEpsilon EMC connector

ACS-410.010ACS-410.020ACS-410.030

Blank insert for unused portwhite

ACS-410.040ivory

ACS-410.041

LAMBDA RANGE COMBINATION TABLE

Legend : designed for these combinationsphysically OK, but not relevantnot applicable

LAMBDA RANGECOMBINATION TABLE

LAMBDAOPTICAL FIBER & TWISTED PAIR CONNECTOR MODULES

▼ The Lambda range is a highly modular set of connectors, surface mountenclosures and patch panels.

▼ Colour coding in conformity with cable colour coding.▼ The Lambda module range comprises the following combinations

• Twisted pair : 2 x RJ45 screened / unscreened3 x RJ45 screened / unscreened / screened+EMC pack

• Optical fiber : 2 x ST and 3 x ST2 x SC and 3 x SC

• Hybrid : 2 x ST + 1 x RJ45 (screened or unscreened)2 x SC + 1 x RJ45 (screened or unscreened)

▼ RJ45 ISO 8877 compliant connectors with T 568B and T 568A pin configuration.▼ Installation of cables is performed outside of enclosure or patch panel for easy

access.▼ All modules offer an integrated cable fastener (tie-wrap) mechanism.▼ Cabled modules are easily fitted into enclosure or patch panel by

a 'Slide & Click' action. No tools required.▼ Hybrid modules recommended for use with Twintek cables.

3 x RJ45ACS-440.031

3 x SCACS-440.033

3 x STACS-440.032

2 x SC + 1 x RJ45ACS-440.053

2 x ST + 1 x RJ45ACS-440.052

2 x STACS-440.022

2 x SCACS-440.023

2 x RJ45ACS-440.021

unscreened RJ45ACS-440.042

MIXED MEDIAConnector unit screened RJ45

ACS-440.052unscreened RJ45ACS-440.043

screened RJ45ACS-440.0533

2 x ST + RJ45 2 x SC + RJ45

Fast and easy cable connection Integrated cable fastener device'Slide & Click' mounting into

Lambda 40 enclosures and patch panels

1

2

LAMBDAOPTICAL FIBER & TWISTED PAIR CONNECTOR MODULES




Optical Performances

Insertion loss (dB) ≤ 0,4Mechanical durability >500 matings (IEC 871-1)

Ordering Codes

23

ACS-440.023ACS-440.033

RJ45

ACS-440.020ACS-440.030

ACS-440.021ACS-440.031

ACS-440.022ACS-440.032

unscreened screenedST SCONE MEDIUM

Connector unit

Connector unit (mm/inches) h x w x d 2 & 3 connectors : 33 x 53.4 x 82 / 1.3 x 2.1 x 3.2Connections number one, two or three/ twisted pair, fiber or hybrid

type RJ45 unscreened or screened/ ST/ SC


D

SE-3

64-0

997-

V2.0

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

LAMBDA 40SURFACE MOUNT ENCLOSURES

▼ The Lambda 40 range is a highly modular set of connectors, surface mount enclosures and patch panels.

▼ The Lambda 40 enclosure is a full metal housing with metallic shutters, providingexcellent EMI protection. It accommodates the Lambda 40 module range.

▼ The Lambda 40 enclosure range comprises the following models :• Lambda 40 / 2 enclosure• Lambda 40 / 3 enclosure• Lambda 40 / 6 enclosure• Lambda 40 /12 enclosure

▼ Installation of cables is performed outside of enclosure or patch panel for easy access.

▼ All modules offer an integrated cable fastener (tie-wrap) mechanism.▼ Cabled modules are easily fitted into enclosure or patch panel by

a 'Slide & Click' action. No tools required.▼ The Lambda 40 Enclosure Series houses the Lambda connector modules.

For the possible combinations, refer to the Lambda Series Combination Table.

Lambda 40 / 2 enclosureACS-441.002

Lambda 40 / 3 enclosurecomposing elements




Lambda 40 / 2 Enclosure ACS-441.002Lambda 40 / 3 Enclosure ACS-441.003Lambda 40 / 6 Enclosure ACS-441.006Lambda 40 / 12 Enclosure ACS-441.012

Fast and easy cable connection Integrated cable fastener device'Slide & Click' mounting into

Lambda 40 enclosures and patch panels

1

2

LAMBDA 40SURFACE MOUNT ENCLOSURES

Ordering Codes

Dimensions (mm/inches) Lambda 40 / 2 enclosureLambda 40 / 3 enclosureLambda 40 / 6 enclosureLambda 40 / 12 enclosure



57 x 40 x 95 / 2.24 x 0.16 x 3.7457 x 40 x 95 / 2.24 x 0.16 x 3.74110 x 40 x 95 / 4.33 x 0.16 x 3.74218 x 40 x 95 / 8.59 x 0.16 x 3.74

D

SE-3

65-0

997-

V2.0

Sub

ject

to c

hang

e w

ithou

t prio

r not

ice.

COVERING PLATES COMBINATION T2 - · PDF fileCOVERING PLATES COMBINATION TABLE ... Mechanical...

Documents

Transcript of COVERING PLATES COMBINATION T2 - · PDF fileCOVERING PLATES COMBINATION TABLE ... Mechanical...