Course Prospectus - MPI · PDF fileCourse Prospectus unique online internationallY...

Course Prospectus

www.corrosion-training.com

unique online internationallY aCCredited Coating insPeCtion Courses

develoPed bY industrY exPerts | internationallY reCognised and aPProvedFlexible studY delivered 100% online | ProFessional, innovative and ComPrehensive

Corrodere Certificate of Completion

ICorr Coating Inspector Level 1 & 2

SSPC Coatings Inspector Level 1 & 2

Certificate accredited for IMO PSPC

Diploma in Coatings for Corrosion Control

Practical Workshop

Coating Supervisor’s Course

Company Licences

Welcome to Corrodere

2

the authors and professionals involved in the creation of the Corrodere training programme have recognised the need to promote professionalism within the coatings industry through an accessible and comprehensive range of courses.

in collaboration with our partners the courses offer qualifications recognised internationally throughout the coatings industry.

this training programme allows you to decide when and how long you want to study. if you travel you can access the course online to help you make good use of your travelling time.

one of the most beneficial factors to online training is that you can apply your learning immediately. as the course progresses you can apply the knowledge, skills and expertise gained, to your work.

Corrodere are grateful to our course partners and thank them for the great support and interest they have shown throughout the production of this online material. the quality and diversity of our partners reflects the wide appeal of the syllabus and how pertinent it is to this expanding and important industry.

COMPanIeS that have taken COrrODere COurSeSBP, LLoyds Register, PPG, Aker Solutions, Pyeroy, Leigh Paints, Jotun, OSG, Euro Marine, ISIS GmbH, STX Europe, WALC Offshore, Cameron, Baracuda, Whessoe-Volkers Steuim, Yacht Charters, Foster Wheeler, Deborah Services Thailand, Exova, BASF, Sellafield, Denholm Industries, Cape Plc, Nusteel Structures, S-Holdings, Marine Spec, SCA Group, Babcocks, BAE Systems, Barrier Ltd, Cleveland Bridge, Hunter Steel, Harris Pye, Jack Tighe, Paint Inspection Ltd, Paintel Ltd, Rhinoceros Ltd, International Paint.

COurSe PartnerS Corrodere are proud to have the following industry partners recognise their Coating and Corrosion Control training courses.

For SSPC, The Society for Proctective Coatings Level 1 and 2, please contact: Silvia Palmieri40 24th Street, Pittsburgh, PA 15222-4656, USATel + 1 412 281 2331 ext 2201 Fax + 1 412 281 [email protected] www.sspc.org/pci_online

The MPI Group is a training, publishing and marketing company that has been involved in the

marine industry since 1981. This has given the group an impressive list of contacts and a detailed knowledge of the industry. MPI has worked in partnership with authoritative Institutes and Associations since 2003 to establish a series of professional training programmes.

mPi group Peel House, Upper South View Farnham, Surrey GU9 7JN, UK

Tel: +44 (0)1252 732220

Fax: +44 (0)1252 732221

Email: [email protected] www.corrosion-training.com

account manager: lucy [email protected] +44 (0)1252 732223

Course manager: michelle West [email protected] Tel +44 (0)1252 732227

3

step 1 Course selection – Discuss with the Corrodere Account Manager your suitability and previous experience prior to selecting the right course for you – +44 (0)1252 732220

step 2 Course registration – Once you have reached a decision on the most suitable course for you, please indicate on the application form (found at the back of this brochure) and return the completed and signed application form with your CV and two passport photographs to the Corrodere Account Manager. [email protected]

step 3 Commencing Your studies – Once your application has been approved and processed you will receive full log in details and further study instructions to begin your course.

Pricing structure for all online courses£675.00 12 months instant access to the internationally accredited online training programme.

applicable to all Corrodere courses

Additional Examination and Certification Fees

£50.00 Corrodere Certificate of Completion

£620.00 iCorr level 1 and level 2 one day practical and theoretical assessment plus the issuing of the accredited Institute of Corrosion certificate and ID card

£275.00 imo PsPC examination plus the issuing of the accredited certificate and ID card

£875.00 Certificate in Coatings for Corrosion Control – Including assessment marking, tutor support, reading material and issuing of certification

£1,625.00 diploma in Coatings for Corrosion Control – Including assessment marking, examination, tutor support, reading material and issuing of the Diploma recognised by the University of Portsmouth

Pricing structure for all classroom based courses£595.00 A two day Coating Supervisor’s Course including printed training material and issuing of the

accredited certificate and ID card

£275.00 A one day Practical Workshop covering basic corrosion, pre-surface preparation and inspection equipment. Recommended for ICorr Level 1 students with little inspection experience

hoW to aPPlY

PriCing struCture

application and Pricing

All course fees are subject to standard UK VAT rates.

4

Course ContentProteCtive Coatings aPPliCation1 Health & Safety 1.1 Company Induction 1.2 Accident Prevention 1.3 House Keeping 1.4 First Aid1.5 Electricity and Air Supply 1.6 Permit to Work 1.7 Risk Assessment 1.8 Material Data Sheets1.9 LEL, TLV, OEL and MEL 1.10 PPE1.11 Basic Access Requirements 1.12 Safety in Surface Preparation 1.13 Safety in Paint Application 1.14 Method Statements 2 Access Plant and Equipment 2.1 Erecting and Dismantling Platforms2.1.1 Erecting and Dismantling Platforms2.1.2 Safe Use of Ladders 2.2 Types of Mobile Access2.2.1 Access Platforms 3 Surface Preparation 3.1 Surface Preparation Requirements

3.1.1 Types and Methods of Surface Preparation

3.1.2 Type of Substrates and Materials

3.1.3 Previously Painted and Coated Substrates

3.2 Surface Preparation Standards

3.2.1 Mechanical and Hand Preparation Standards

3.2.2 Pre-surface Conditions

3.2.3 Pre-surface Preparation and Cleaning

3.3 Hand and Power Tool Equipment3.3.1 Chipping Hammer 3.3.2 Wire Brush 3.3.3 Scraper 3.3.4 Needle Gun 3.3.5 Power Wire Brush and Grinding3.4 Pre-cleaning Methods3.4.1 Steam Cleaning 3.4.2 Water Washing 3.4.3 Solvent Cleaning3.5 Auxiliary Equipment3.5.1 Compressors 3.5.2 Heaters 3.5.3 Lighting 3.5.4 Grit Removal and Hoppers 3.5.5 De-humidification 4 Paint Types 4.1 Coating Types and Systems 4.2 Product Data Sheets - Review 4.3 Single and Two Part Materials 4.4 Paint Mixing 4.5 Pot-life and Induction 4.6 Storage 4.7 Batch Numbers4.8 Volume Solids 4.9 Coverage 4.10 Compatibility

5 Paint Application 5.1 Environmental Conditions5.1.1 Relative Humidity and Dew Point 5.1.2 Steel Temperature

5.2 Types of Paint Application Equipment

5.2.1 Brush Application 5.2.2 Roller Application 5.2.3 Airless Spray 5.2.4 Air Assisted Spray5.3 Paint Film Thickness5.3.1 Wet Film Thickness 5.3.2 Dry Film Thickness 5.3.3 Drying and Recoating 5.3.4 Strip Coating 5.4 Paint Application Procedures5.4.1 Surface Cleaning 5.4.2 Coating Damage and Repair 5.4.3 Materials and Equipment Handling 5.5 Paint Locations and Types5.5.1 Shop Painting 5.5.2 Site Painting

5.5.3 General Maintenance - Plant and Equipment

5.5.4 Equipment Cleaning 6 Quality Control 6.1 Inspection Equipment 6.1.1 Specialist Equipment 6.2 Inspection Standards6.2.1 BS, EN, ISO etc6.2.2 Visual Standards 6.3 Specifications

6.3.1 Equipment, Standards and Specifications

abrasive blast Cleaning1 Introduction 1.1 General Overview 1.2 Basic Corrosion 1.3 Mill Scale1.4 Substrate Materials1.5 Pre-Surface Condition

1.6 Mechanical Blast Cleaning Equipment

1.7 Types of Air Blast Equipment 1.8 Wet Abrasive Blast Cleaning 2 Health and Safety 2.1 (Health and Safety) Introduction

2.2 Method Statements/Risk Assessments

2.3 Personal Protection Equipment (PPE)

2.4 Breathing Air/Helmets 3 Blast Media 3.1 Types of Abrasives 3.2 Surface Profile 4 Standards and Quality Control 4.1 Visual (Photographic) Standards4.2 Surface Cleanliness 4.3 Environmental Conditions

5 Operational Procedures

5.1 Compressed Air and Air Requirements

5.2 Blast Hose and Associated Equipment

5.3 Types of Nozzle5.4 Ventilation and Lighting 5.5 Communication6 Process Control 6.1 Equipment Set-up and Testing 6.2 Abrasive Blast Cleaning Process

6.3 Abrasive Blast Cleaning Standards/Guides

sPraY Painting1 Introduction 1.1 Paint Application (Introduction)1.2 Basic Corrosion 1.3 Surface Preparation 1.4 Coating Types and Systems 2 Health and Safety 2.1 Material Safety Data Sheets2.2 Risk Assessments 2.3 Method Statements 3 Paint Materials 3.1 Product Data Sheets - Review3.2 Paint Storage and Paint Mixing 3.3 Quality Control 4 Airless Spray Equipment 4.1 Airless Spray Painting Equipment 4.1.1 Airless Spray Painting Equipment – A4.1.2 Airless Spray Painting Equipment – B

4.2 Equipment Set-up, Testing and General Use

5 Conventional Air Spray 5.1 Conventional Air Spray Equipment6 Plural Component Spray6.1 Plural Spray

5

sPeCialist units

1 Coating Inspection and Inspection Equipment

1.1 Inspection and Testing Equipment 1.2 Duties of a Painting Inspector 1.3 Low Voltage Holiday Detector1.4 High Voltage Holiday Detector1.5 Practical Arithmetic1.6 Pre-Job Conference1.7 Navigating Coating Specifications1.8 Inspection Plans1.9 The Roles of QA and QC Inspector1.10 Inspection Documentation1.11 Coating Inspectors Safety1.12 Advanced Non-destructive Tests1.13 Advanced Destructive Tests

2 Corrosion, Cathodic Protection and Coatings

2.1 Corrosion Fundamentals2.2 Forms of Corrosion2.3 Engineering Materials2.4 Environments

2.5 Cathodic Protection in the Marine Environment

2.6 Cathodic Protection of Pipelines2.7 Cathodic Protection and Coatings3 Marine General3.1 IMO Regulations – Ballast Tanks

3.1.1 Performance Standards for Protective Coatings: Part 1




3.2 High-Pressure Water Jetting

3.2.1 Introduction to High Pressure Water Jetting

3.2.2 High Pressure Water Jetting on Sea Going Vessels

3.3 Coating Systems3.3.1 Outside Shell Coating Systems 3.3.2 Cargo Tank Coating Systems 3.3.3 Cargo Hold Coating Systems 3.3.4 Superstructure Coating Systems3.3.5 Main Deck Coating Systems 3.4 Dry Docking Procedures

3.4.1 In-Docking, Specification & Surface Preparation

3.4.2 Coating Application and Undocking3.5 IMO Regulations Cargo Oil Tanks3.6 IMO Regulations Void Spaces

3.7 IMO Guidelines for Maintenance and Repair of Coatings

3.8 Coating Survey Guide for ballast tanks

4 Marine PSPC 4.1 Role of the Inspector 4.2 International Standards 4.3 Coating Technical File 4.4 Ventilation and De-humidification 4.5 Pre-job Conference

5 Coating Failures5.1 Coating Failures5.2 Coating Failure Modes6 Metallic Coatings 6.1 Thermal Metal Spray 6.2 Galvanizing 7 Design & Construction 7.1 Material Design and Type 8 Concrete 8.1 Concrete Repair and Protection8.2 Concrete Basics8.3 Concrete Moisture8.4 Concrete Preparation8.5 Concrete Coatings

8.6 Concrete Standards and Guidelines

9 Fire Protection 9.1 Passive Fire Protection 10 Specialist Coatings10.1 Specialist Coatings10.2 History of Pipe Coatings

10.3 Fusion Bonded Epoxy Powder Coatings (FBE)

10.4 Miscellaneous Pipeline Coatings and Field Joints

10.5 Rubber Linings10.6 Special Coatings and Linings

11 ISO and other International Standards

11.1 ISO Standards11.1.1 EN ISO 12944 (Parts 1-8)11.1.2 EN ISO 462411.1.3 EN ISO 4628 (Parts 1-6)11.1.4 BS EN ISO 8501-111.1.5 BS EN ISO 8501-211.1.6 BS EN ISO 8501-311.1.7 BS EN ISO 8501-411.1.8 BS EN ISO 8502 Part 211.1.9 BS EN ISO 8502 Part 311.1.10 BS EN ISO 8502 Part 411.1.11 BS EN ISO 8502 Part 511.1.12 BS EN ISO 8502 Part 611.1.13 BS EN ISO 8502 Part 811.1.14 BS EN ISO 8502 Part 911.1.15 BS EN ISO 8502 Part 1111.1.16 BS EN ISO 8502 Part 1211.1.17 BS EN ISO 8503-111.1.18 BS EN ISO 8503-211.1.19 BS EN ISO 8503-311.1.20 BS EN ISO 8503-411.1.21 BS EN ISO 8503-511.1.22 BS EN ISO 8504-111.1.23 BS EN ISO 8504-211.1.24 BS EN ISO 8504-311.1.25 BS EN ISO 2409 (BS3900-E6)11.1.26 ISO Miscellaneous11.2 SSPC Standards11.2.1 SSPC VIS 111.2.2 SSPC VIS 211.2.3 SSPC VIS 311.2.4 SSPC VIS 4 - NACE VIS 711.2.5 SSPC VIS 5 - NACE VIS 911.2.6 SSPC – PA1

11.2.7 SSPC – PA211.2.8 SSPC Miscellaneous11.3 ASTM Standards11.3.1 ASTM D 454111.3.2 ASTM D 667711.3.3 ASTM D 335911.3.4 ASTM D 441711.3.5 ASTM – Miscellaneous Standards11.4 NORSOK Standards11.4.1 NORSOK M-50112 Quality Management 12.1 Quality Management System13 Paint Testing 13.1 Laboratory and Field Testing

13.1.1 Laboratory and Field Testing – Part 1

13.1.2 Laboratory and Field Testing – Part 2

13.2 Paint Testing, Paint Constituents and Paint Chemistry

13.2.1 Paint Testing, Paint Constituents and Paint Chemistry Part 1

13.2.2 Paint Testing, Paint Constituents and Paint Chemistry Part 2

14 Soluble Salts14.1 Soluble Salts15 Paint Manufacture15.1 Paint Manufacture16 Offshore16.1 Offshore Construction16.2 Offshore Maintenance17 Maintenance Painting17.1 Maintenance Painting Operations18 Specialist Tests

18.1 Specialist Tests and Test Equipment

19 Coating Surveys19.1 Coating Surveys20 Environmental20.1 Volatile Organic Compounds20.2 Hazardous Waste

21 Management and Supervision

21.1 Management and Supervision

Certificate of Completion

theoretical online training for students not requiring an inspector certificate but with an interest or career in the coatings industry. receive immediate access to our comprehensive online programme for 12 months and pass multiple choice questions with 100% for each module to achieve the Certificate of Completion.

online studY

6

CertIFICate aChIeveDCorrodere Certificate of Completion

teaChIng MethODS100% online training and online assessments with channels of communication by telephone, email and social forums to our authors and administrative staff for study support throughout the 12 months.

COurSe DuratIOn12 months access to the course material is provided although it is recommended to take between 3-6 months to complete the modules. The benefit of studying this online course is the level of flexibility and the ability to fit your studying around your busy schedule.

MarkIng StruCture100% pass mark is required for each modular multiple choice test before moving onto the next module. Being assessed after studying each module will reconfirm what you have learned and ensure the knowledge you have retained is correct.

PayMentPayment is required upon application by cheque, bank transfer or credit card. If your company requires an invoice, access to the course material will be provided on receipt of payment. Fees are refunded in full should an application be declined.

COurSe FeeS£725.00+vat

Fees include 12 months online access to the course material and Certificate of Completion.

“ We considered various training programmes for our staff and found Corrodere

was extremely comprehensive, flexible and economical. We use the Corrodere training

for all our technical and sales staff. The feedback from staff has been tremendous.

Some staff will continue studying and move onto the Corrodere Diploma Course. ”gordon bell, managing director - leighs Paints

ICorr Coating inspector level 1 & 2 (inc marine & offshore)

a coating inspector certificate for students looking for work as a qualified coating inspector. the iCorr certificate is recognised internationally and is an essential requirement for a multitude of large international clients.

Fit your professional study programme around your busy work schedule, put your travelling time to use or fill in those quiet evenings offshore by studying this industry recognised qualification. there is no need to take 2 weeks holiday to achieve this certificate just one day to attend the practical and theoretical assessment.

Full study support is provided throughout the course by authors and administrative staff along with student forums and social media, you will never feel left to study alone.

to achieve either of these professional certificates, core and specialist online modules (outlined on pages 4-5) must be studied and online multiple choice assessments passed with 100% prior to attending a one day practical and theoretical assessment. (Please see our website for assessment dates near you – www.corrosion-training.com)

online studY

7

CertIFICate aChIeveDICorr Level 1 and Level 2 Coating Inspector (inc. marine and offshore)

Pre-reQuISIteS � ICorr Level 1 – 12 months industry

experience � ICorr Level 2 – 12 months coating

inspection experience


COurSe DuratIOn 12 months access to the course material is provided however it is recommended to take between 3-6 months to complete the modules. The benefit of studying this online course is the level of flexibility and the ability to fit your studying around your busy day job and home life.

aSSeSSMent LengthThe one day theoretical and practical assessment is split into a 4 hour theoretical exam and a 1 hour practical assessment. The theoretical

One Day aSSeSSMentA minimum of 70% required to pass the theoretical assessment

A minimum of 90% required to pass the practical assessment.

PayMentPayment is required upon application by cheque, bank transfer or credit card. If your company requires an invoice access to the course material will be provided on receipt of payment. Fees are refunded in full should an application be declined.

Further QuaLIFICatIOnOn completion of ICorr Level 1 through the Corrodere programme you can apply for iCorr level 2 for £620.00+vat avoiding paying access to the online training programme for a second time.

COurSe FeeSICorr level 1 Coating Inspector Certificate - £1,295.00+vat

ICorr level 2 Coating Inspector Certificate - £1,295.00+vat

Fees include 12 months access to

our comprehensive online training

programme, the one day assessment

day and issuing of the official ICorr

certificate and ID card.

part of the assessment consists of general coatings multiple choice and 5 essay questions followed by inspection specific multiple choice and 4 essay questions. An additional 1 hour practical assessment and 1 hour essay exam is set for ICorr level 2 students.

SIttIng exaMS OverSeaSThe ICorr assessors will run assessments in-house or overseas for a minimum of 6 students on a set date. Additional assessor travel expenses will apply.

reSIttIng exaMSA resit charge of £275.00+VAT will apply. Resit your exam within 12 months of receipt of result and receive 1 year’s access to the training material.

extenSIOn FeeA 12 month extension to the course costs - £100.00+VAT. Available to students unable to pass their assessment within the allotted 12 months.

MarkIng StruCtureOnLIne100% pass mark for all multiple choice online questions must be achieved before applying to the one day practical and theoretical assessment.

8

PCI CertIFICatIOn

level 1 - basic inspector

There is no entry criteria to study at this level.

level 2 - Certified inspector

There are two entry criteria options to study at this level - Process A and A1.

To become a SSPC Certified Coatings Inspector through process A, the candidate must pass each component of the online training and the certification exam with a score of 50% or higher. You must also document a minimum of 2 years or 3000 hours of coating inspection experience and 40 hours of approved training.

Alternatively, to achieve a SSPC Certified Coatings Inspector certificate through process A1, the candidate must pass each component of the online training and the certification exam with a score of 80% or higher. You must also document 5 years or 7500 hours of coating inspection experience. No approved training is required through process A.

To achieve certification after completing the PCI online training and passing the PCI practical and theoretical exam, candidates need to submit an application along with their work experience and training history forms. Students must acknowledge in the application that they have read and understood the contents of the Disciplinary Action Programme (DAC) as well as the programme rules.

CertIFICate aChIeveD SSPC LEVEL 1 BASIC INSPECTOR CERTIFICATE

SSPC LEVEL 2 CERTIFIED INSPECTOR CERTIFICATE

COurSe StruCtureteaChIng MethODS

100% online training and online assessment.

COurSe DuratIOn

Recommended 3-6 months. You will be provided with access to the course content for 12 months.

theOretICaL anD PraCtICaL aSSeSSMentSaSSeSSMent DateS

Scheduled quarterly dates refer to the website for specific dates.

aSSeSSMent Length

For level 1 a 4-hour theoretical exam and a practical assessment is a requirement to achieve the SSPC certificate. For Level 2 a four hour exam needs to be taken which includes a one hour Inspection Plan.

SIttIng exaMS OverSeaS

For a minimum of six students, overseas assessments can be arranged. Additional travel expenses for the assessor will however apply.

reSIttIng exaMS

A resit charge is applicable to conduct the practical and theoretical assessment.

the MarkIng StruCture

� 100% pass mark for the online training is required before the theoretical and practical assessment date is set.

� 70% pass mark for the theoretical and practical assessment is required to achieve the SSPC Level 1 and Level 2 Inspectors certificate.

Language OF COurSe

The course will be conducted entirely in English.

COurSe FeeS SSPC Level 1 Basic Inspector Certificate - on application

SSPC Level 2 Certified Inspector Certificate - on application

PayMent

For further information and application form please contact: Silvia Palmieri

SSPC, 40 24th Street, Pittsburgh, PA 15222-4656, USA

Tel + 1 412 281 2331 ext 2201 Fax + 1 412 281 9992

[email protected]

www.sspc.org/pci_online

the society for Protective Coatings (ssPC) has successfully developed and managed the Protective Coatings inspector Programme (PCi), which meets the requirements of astm international standard d 3276 ‘standard guide for Painting inspectors’.

this course has been approved by classification societies such as lloyds register and american bureau of shipping (abs) and rtna and is equivalent to naCe Coating inspector level 2 and Frosio inspector level iii in accordance with the imo Performance standard for Protective Coatings.

ssPC has approved the Corrodere online training programme to deliver the Protective Coatings inspector Programme.

the PCi Programme requires you to complete and pass the online core and specialist modules with 100% (as outlined on pages 4 and 5), followed by a one day practical and theoretical assessment in accordance with ssPC regulations.

ssPC Protective Coatings inspector Programme PCi level 1 & 2

online studY

9

CertIFICate aChIeveDAccredited and approved under the requirements of the IMO Performance Standards for Protective Coatings. MSC 215(82), MSC 244(83) and MSC 288(87) and to IACS UI SC223.


COurSe DuratIOn 12 months access to the course material is provided however it is recommended to take between 3-6 months to complete the modules. The benefit of studying this online course is the level of flexibility and the ability to fit your studying around your busy day job and home life.

aSSeSSMent LengthThe 3 hour practical and theoretical assessment is split into a 1 hour theoretical exam followed by a 2 hour Marine specific coatings practical assessment.

SIttIng exaMS OverSeaSThe assessors will run assessments in-house or overseas for a minimum of 6 students on a set date. Additional assessor travel expenses will apply.

reSIttIng exaMSA resit charge of £275.00+VAT will apply. Resit your exam within 12 months of receipt of result and receive 1 year’s access to the training material.

extenSIOn FeeA 12 month extension to the course costs - £100.00+VAT. Available to students unable to pass their assessment within the allotted 12 months.

the MarkIng StruCtureOnLIne100% pass mark for all multiple choice online questions must be achieved before applying to the practical and theoretical assessment.

COurSe FeeS£950.00+vat

Fees include 12 months access to our comprehensive online training programme, the practical and theoretical assessment day and issuing of the official IMO PSPC certificate.

students requiring a specific marine coatings inspection certificate will enrol on this course to enable themselves to work as a fully qualified coating inspector within the marine industry.

to achieve this professional certificate, core and specialist online modules (outlined on pages 4-5) must be studied and online multiple choice assessments passed with 100% prior to attending a 3 hour practical and theoretical assessment.(Please see our website for assessment dates near you. www.corrosion-training.com)

this qualification is the equivalent to naCe Coating inspector level 2 and Frosio inspector level iii in accordance with imo Performance standard for Protective Coatings and iaCs Csr.

One Day aSSeSSMent A minimum of 70% required to pass the theoretical assessment

A minimum of 90% required to pass the practical assessment.

PayMentPayment is required upon application by cheque, bank transfer or credit card. If your company requires an invoice access to the course material will be provided on receipt of payment. Fees are refunded in full should an application be declined.

online studY

imo PsPC Certificate – marine Coating inspection

“ In my role of Project Manager I found the Corrodere course a flexible and enjoyable method of education in corrosion control and understanding protective coatings. ”a.imrie, Cameron subsea systems

10

endorsed by lloyds register this one day workshop has been created to benefit students, engineers, trainers, paint and equipment suppliers and contractors personnel and includes a number of theoretical and practical exercises.

it is advisable for iCorr level 1 students with little or no inspection experience to attend this workshop.

Practical Workshop - 1 daY Course

Classroom

COurSe FeeS£275.00 +vat

Fees include 1 full days training, lunch and refreshments and a Certificate of Completion endorsed by Lloyd’s Register

CertIFICate aChIeveDPractical Workshop Certificate of Completion endorsed by Lloyd’s register.

COurSe SuMMaryBasic corrosion will be reviewed before paint coatings and will cover the volume solids, spreading rates and typical wastage of coatings in practical situations. Students will participate in reviewing a typical coating specification, calculation of areas and establishing the required quantities for each coating system.

A review of pre-surface preparation will be conducted and the student will learn about pre-surface preparation techniques prior to conducting methods of surface preparation such as abrasive blast cleaning ie weld spatter, sharp edges, laminations, shelling, surface contamination etc.

A comprehensive review of visual standards will be covered in the workshop. Visual standards from SSPC, NACE and ISO will be discussed and demonstrated to ensure the student is familiar with the visual standards used in the coatings industry.

The second half of the workshop will consist of inspection equipment used in the coatings industry being demonstrated with practical exercises conducted in group and single use.

Inspection equipment will be available for: ambient conditions, surface profile, wet and dry film thickness, holiday detection, assessment of dust, soluble salt contamination and adhesion testing.

A review of coating defects commonly

08:45 - 09:00 Introduction and Aims and Objectives

09:00 - 09:45 Basic Corrosion

09:45 - 10:30 Volume Solids, Paint Calculation, Spreading Rates and Wastage

10:30 - 10:45 Break

10:45 - 11:15 Pre-surface preparation

11:15 - 12:30 Visual Standards (ISO, SSPC, NACE etc)

12:30 - 13:00 Lunch

13:00 - 16:30 Practical Interactive Demonstrations

COurSe tIMetaBLe

WOrkShOP DateS anD LOCatIOnSPlease see our website for future dates and venues www.corrosion-training.com or call +44 (0)1252 732220

found in the protective coatings industry will be conducted and finally a review of the abrasive used for surface preparation of substrates prior to coating application will be conducted.

A set of course notes will be given to each student and technical support following the useful completion of the workshop and exercises.

COurSe COntentS � Basic and forms of corrosion

� Volume solids, paint calculation, spreading rates and paint wastage

� Pre-surface preparation

� Visual Standards

� Inspection Equipment - Practical workshop

11

CLaSSrOOM traInIngThe Coating Supervisor’s Course is conducted in a classroom by a qualified and experienced tutor.

The course comprises of a number of interactive presentations, exercises and group workshops along with theoretical and practical assessments.

COurSe COntentSThe Coating Supervisor’s Course covers a number of industry specific subjects:

� The Coating Supervisors Roles and Responsibilities

� COSHH and Risk Assessment

� Material Health & Safety Data Sheets

� Method Statements

� Coating Types and Systems

� Paint Specifications

� ISO and Other Related Standards

� Paint and Coating Failure

� Paint Inspection – Theoretical and Practical

The course has been developed to assist coating supervisors gain a thorough understanding of their roles and responsibilities, improve awareness on Health & Safety and

environmental legislation. They will also gain an insight into coating technology, coating specifications, inspection techniques and equipment and paint related problems.

Pre-reQuISIteThe course is available for personnel who have completed the ICATS course or other approved training programme. Coating applicators, foreman or supervisors with no formal qualifications can apply for the course providing they have more than two years in a supervisory or technical manager role.

The course is also suitable for qualified coating inspectors.

traInIng venueS anD DateSThe course is conducted on a regular basis throughout the UK. Tailor-made courses are also available and can be held at a client’s own facilities.

Overseas courses are also available.

Please see our website – www.coatingsupervisor.com or call +44 (0)1252 732220

Coatings supervisor’s Course – 2 daY Course

Classroom

the Coating supervisor’s Course has been developed to meet the requirements of the surface preparation and coating application industry. the industry has undergone considerable changes over the years, specifically related to increased levels of health & safety, new environmental legislation and minimum requirements for quality control.

the role and responsibilities of the Coating supervisor has also increased which has necessitated the need for a structured and recognised training programme.

the Coating supervisor’s Course is a comprehensive 2 day course which has been endorsed by Correx under the industrial Coating applicators scheme (iCats) and lloyds register.

COurSe FeeS £595.00+vatFees include two full days of training, a comprehensive training manual, certificate, ID card and refreshments throughout the day. Accommodation and travel is not included.

traInIng MaterIaLA comprehensive Coating Supervisor’s Training Manual is provided to all students.

the MarkIng StruCtureA minimum of 70% is required to pass the practical and theoretical assessment.

vISIt OnLInewww.coatingsupervisor.com

ManDatOry reQuIreMentAs of the 1st of December 2012, it was made a mandatory requirement for all Coating Supervisor’s working for the Highway Agency Sector Scheme 19a to attend the ‘Coating Supervisor’s course’ to achieve the Correx endorsed Certificate.

In accordance with ICorr REQ DOC (ICATS)

12

Why study a diploma in Coatings for Corrosion Control?Endorsed by Lloyds Register, ICorr, SSPC and the BCF, Corrodere have created a Diploma for students who want to further their education in coating and corrosion control. Observing a requirement within the industry for professionals who want to learn more about coatings, Corrodere have managed to reach this expectation by providing a Diploma recognised internationally by the coatings industry. The Diploma can be used to support a submission for Accredited Prior Learning (APL) when applying to a relevant University of Portsmouth degree.

The high level of research and commitment required to pass this eagerly awaited Diploma will show your absolute dedication to the coating and corrosion industry and your drive to progress your career within it.

This unique and challenging Diploma has been written and created by some of the coating industries most respected and knowledgeable professionals.

are you ready to take on this diploma?Acquiring a Diploma of this standard will not be easy, students will need a thorough understanding and background in the coatings and corrosion control industry before embarking on this challenging study programme.

A distance learning study programme is flexible and will fit around your busy work schedule, put your travelling time to use or fill in those quiet evenings.

You’re never left to study aloneFull study support is provided throughout the course by authors and administrative staff along with student forums and social media, you will never feel left to study alone.

assignments and examinationStudents are required to select 6 specialist subjects from 12 to thoroughly research and produce a 2,500-3,000 word assignment over a 12 month period. Access to the Corrodere online training programme, C.G Mungers book ‘Corrosion Prevention by Protective Coatings’, a subscription to PCE, archived industry articles, a Fitz Atlas and a comprehensive reading list are all made available to students to assist their research.

Upon the completion and passing of the 6 assignments a 3 hour exam must be passed to achieve the Diploma. Students will be examined on Protective Coatings for Corrosion Control as a whole so will need to read around the entire subject not just the 6 chosen specialist subjects. Exams can be sat anywhere in the world, again offering you full flexibility.

Certificate optionCertificate students are required to submit the 6 assignments but not sit the exam. The Certificate is not recognised by the University of Portsmouth but is accredited by Lloyd’s, ICorr, the BCF and SSPC. The course fee is £1,550.00 + VAT to include 12 months access to our comprehensive online training programme, reading material and issuing of the certificate.

distanCe learning

aSSIgnMent SuBjeCtS1. Coating Inspection and Inspection Equipment2. Cathodic Protection3. Marine Coatings4. Coating Failure5. Metallic Coatings6. Design and Construction7. Concrete8. Fire Protection9. Specialist Coatings10. ISO and Other International Standards11. Paint Technology and Testing12. Paint Manufacture

COurSe FeeS£2,300.00+vat

Fees include 12 months access to our comprehensive online training programme, reading material, examination and issuing of the Diploma Certificate.

diploma in Coatings for Corrosion Control

13

COurSe StruCtureteaChing methods

Online and through distance learning.

Course duration

12 months.

student assignments

One 2500-3000 word assignment submitted for the 6 selected subjects. Assignments are a compulsory element of the course and must be completed and passed prior to taking the final exam.

the exaMInatIOnexam date and duration

Two exam dates are set per academic year - October/November and March/April. The exam is closed book consisting of multiple-choice and essay type questions and 3 hours in length.

sitting overseas

Arrangements can be made for candidates to sit the exam in their country of residence, subject to available support facilities.

resitting exams

Students are entitled to resit the final examination once within 6 months of their first attempt, for an additional cost of £275 +VAT.

the MarkIng StruCturestudent assignments

Constitutes 60% of the final mark.

Final Written exam

Constitutes 40% of the final mark.

Pass mark

The overall pass mark for the Diploma including assignment mark is 75%. Full details will be issued in the Diploma handbook upon registration.

reFerenCe MaterIaLCorrodere online

Students will be provided with access to the online training material for 12 months.

additional reFerenCe material

Each student will be provided with ‘Corrosion Prevention by Protective Coatings’ by C.G. Munger, access to archive material from magazines JPCL and PCE as well as a free subscription to PCE for 12 months and a free Fitz Atlas.

StuDy SuPPOrtthe Course Programme managers, tutors and authors

To support you during your studies, the Programme Manager, Tutors & Authors are available to help with any problems or technical questions. Contact details will be given to you on commencement of the course.

aDMInIStratIOn For matters relating to enrolment, payment of fees, change of enrolment details, etc. Contact MPI Group on: Tel +44 (0)1252 732220 or fax on +44 (0)1252 732221. Email: [email protected]

StuDyIng tIMesPeCialist subJeCts

We recommend 10 to 30 hours research and study time for each subject, with additional time being set aside for completing the assignments.

entrY Criteria

Below are guidelines. All applicants will be reviewed by the Course Programme Manager who makes the final decision on acceptance.

� ICorr Level 2

� SSPC Level 2

� NACE Level 2

� FROSIO Level 3

� Corrodere IMO/PSPC

� HNC in relevant subject

� Candidates with no formal qualifications but who can demonstrate extensive relevant industrial experience are welcome to apply.

language oF Course

The course will be conducted entirely in English, in verbal and written format.

hoW to enrol

Complete the application form and send with your payment to MPI Group, Peel House, Upper South View, Farnham, Surrey GU9 7JN. UK or email to [email protected]

COurSe FeeSdiPloma Fee

£2,300.00 +vat

This covers 12 month access to the extensive online training, reading material, assignment marking, examination, tutor support and the issuing of the certificate. The Diploma fee does NOT include any travel, food or hotel accommodation required.

CertiFiCate Fee

£1,550.00 +vat

This covers 12 month access to the extensive online training, reading material, assignment marking, tutor support and the issuing of the certificate.

PaYments

Payment is required upon application by cheque, bank transfer or credit card. If your company requires an invoice access to the course material will be provided on receipt of payment. Fees are refunded in full should an application be declined.

PayMent PLan Available to help spread the cost of the course over a 5 month period split into 3 payments. Please see our website for more information www.corrosion-training.com or contact the Account Manager on +44 (0)1252 732220. Discounts are available for group registrations. Please contact MPI Group for details. Tel:+44 (0)1252 732220. Email: [email protected]

extension Fee

A 12 month study extension is available for £100 +VAT. This gives you another chance to sit your exam if you have not managed to do so within the 12 months agreed.

resitting exams

A resit charge of £275.00+VAT will apply. Resit your exam within 12 months of receipt of result and receive 1 year’s access to the training material.

PaYment methods

Cheque made payable to MPI Group.

bank transfer MPI Group bank account at: National Westminster Bank, 19 Shaftesbury Avenue, London, W1A 4QQ, UK Account No. 06532381 Sort Code: 56-00-29

Credit Card Include number, card type, issue and expiry dates, security code and address of the card holder.

vat

Applied to UK company and individual applications and EU individuals, all other applications are exempt from VAT.

CanCeLLatIOn POLICyterms

A full refund (less an administrative charge) will be awarded on receipt of written cancellation before you have accessed the online material. If you withdraw after you have accessed the material you will be liable for the full fee.

ConFidentialitY

Students are advised that assignments are processed as confidential and will not be shared with any third party outside of the MPI Group. The content of the course is subject to change at the discretion of the Course Programme Manager.

distanCe learning

diploma terms and Conditions

14

Train your entire workforce in the methods of coating and corrosion control. It is possible with a Corrodere online training licence. Allowing an unlimited number of personnel to study online 24 hours a day, 7 days a week.

BeSPOke PaCkageSetting up a training licence with Corrodere could not be easier!

Our IT experts will create your very own online training programme with company logos and in house administrative access allowing you to tightly monitor staff progression throughout the programme. There are very few limits to the bespoke training programme we can offer you. You tell us what you and your staff require and we will meet your needs.

All training material is continually reviewed to ensure it is always completely up to date.

Qualify your staff with Certificate of Completion, ICorr, IMO or the Diploma in Coatings for Corrosion Control.

aSSeSSMentS anD aSSeSSOrSOur assessors can either conduct the practical and theoretical assessments in house or train one of your staff members to qualify as an assessor and run the assessments on our behalf.

LICenCe COStS An annual fee is charged for a minimum of 2 years access to the programme plus a certificate fee per student. Costs will vary depending on the size of your workforce and your specific requirements.

BeneFItS OF PurChaSIng a COrrODere LICenCe � Your company has full administrative rights

� The licence gives unlimited online training access to the entire workforce

� Online access 24/7, offshore and abroad

� Comprehensive state of the art training methods

� Internationally approved and endorsed training material

� Bespoke web design and domain name

� Certificates printed directly upon successful completion of our training

� Staff progress through further training and qualifications

Companies that have already seen the benefits of using a Corrodere company licence include

PPG, Leighs Paints, BP, Lloyd’s Register, International Paint, Jotun and SSPC.

Company licences

online studY

To arrange a meeting to discuss the benefits of having an in-house company licence please contact the Corrodere Account Manager – Lucy Pavia on +44 (0) 1252 732223 or email [email protected]

“ The Corrodere Coating & Corrosion Control Training programme has been developed with industry experts and as such provides a comprehensive information of the basics of corrosion, as well as the methods of surface treatment and application of protective coatings. We consider this interactive on-line based training course as one of the best training tools available on the Protective and Marine Coatings market today. The training course content and accreditations meets our requirements and as such, PPG protective & Marine Coatings has adopted the Corrodere training as a standard internal training programme world wide. ” krassi nikolov, global technical service manager - PPg Protective & marine Coatings

APPLICATION FOR ENROLMENT

Please return this form to: MPI Group, Peel House, Upper South View, Farnham, Surrey GU9 7JNTel: +44 (0)1252 732220 Fax: +44 (0)1252 732221 Email: [email protected]

Please complete in black ink and capital letters

PerSOnaL DetaILS (2 passport sized photographs required)

Surname: Forename: Title:

Sex: M/F Nationality: Country of Permanent Residence:

COntaCt DetaILS

Correspondence Address:

Contact Tel No: Contact Fax No:

Contact E-mail: Contact Mobile:

Company/Employer: Your Position:

Work Phone No: Work E-mail:

COurSe i would like to enrol on the following course – fees due with application + 20% vat (where applicable)

Material Access Only £675.00

Corrodere Certificate of Completion £725.00

ICorr Coatings Inspector Level 1 * £1,295.00

ICorr Coatings Inspector Level 2 * £1,295.00

IMO PSPC Certificate (MSC 215(82) and IACS UI SC 223)* £950.00

Diploma in Coatings for Corrosion Control * £2,300.00

Certificate in Coatings for Corrosion Control £1,550.00

One day Practical Workshop £275.00

Coatings Supervisor’s Course * £595.00

* fee includes practical assessment and/or examination

SSPC Protective Coatings Inspector – price on application to SSPC

Total Fees: £

+ 20% VAT: £

TOTAL : £

DIPLOMa StuDentS OnLy Please select 6 of the 12 subjects listed below for your tutor marked assignments.

1. Coating Inspection and Inspection Equipment 5. Metallic Coatings 9. Specialist Coatings

2. Cathodic Protection 6. Design and Construction 10. ISO and Other International Standards

3. Marine Coatings 7. Concrete 11. Paint Technology and Testing

4. Coating Failure 8. Fire Protection 12. Paint Manufacture

InvOICe VAT number required for all EU countries:

Please send me an invoice (tick) Please send my company an invoice (tick)

PayMent Tick box

Cheque I enclose a cheque for: made payable to MPI Group (Cheques must be in pounds sterling and drawn on a British bank)

UK Bank TransferI am making a payment free of all charges directly to the MPI Group bank account at: National Westminster Bank Plc, 19 Shaftesbury Avenue, London, W1A 4QQ, UKAccount No: 06532381 Sort Code: 56-00-29

EU/Non EU Bank Transfer

I am making a payment which includes a £12 bank charge directly to the MPI Group bank account at: IBAN: GB35 NWBK 5600 2906 5323 81 Swift Code: NWBK GB2LAccount No: 06532381 Sort Code: 56-00-29Account Name: MPI Group Bank Name: National Westminster Bank PlcBank Address: 19 Shaftesbury Avenue, London, W1A 4QQ, UK

Credit Card (tick one) VISA MASTERCARD AMERICAN EXPRESS

Card Number: Expiry Date:

Holders Name: 3 Digit Security Code:

Billing Address (If different to application):

APPLICATION FOR ENROLMENT eDuCatIOn/exPerIenCe Please attach a copy of your CV, appropriate certificates and 2 passport sized photographs.

DeCLaratIOn I confirm that the statements made by me on this form are correct and that I will be bound by the terms & conditions as stated:

Signed: Dated:

Data Protection: We would like to keep you informed of MPI Group’s products and services and may also from time to time make your details available to carefully screened companies who may be of interest to you. However, if you specifically do not wish your details to be used, please tick here:

hOW DID yOu hear aBOut the COurSe?

1. Publication (please state)

2. Event (please state)

3. Website link (please state)

4. Word of mouth

5. Other

6. Institute: ICorr, BCF, SSPC or other (please state)

Please return this form to: MPI Group, Peel House, Upper South View, Farnham, Surrey GU9 7JNTel: +44 (0)1252 732220 Fax: +44 (0)1252 732221 Email: [email protected]

Course Prospectus - MPI · PDF fileCourse Prospectus unique online internationallY...

Documents

Transcript of Course Prospectus - MPI · PDF fileCourse Prospectus unique online internationallY...