Course Name – Unit Title. Welcome MABAS Division 10 –Monthly In-service Training Sessions...
-
Upload
ashley-cameron -
Category
Documents
-
view
214 -
download
0
Transcript of Course Name – Unit Title. Welcome MABAS Division 10 –Monthly In-service Training Sessions...
Course Name – Unit Title
Course Name – Unit Title
Welcome
• MABAS Division 10– Monthly In-service
Training Sessions– Sponsored by
MABAS 10 Training Officers Committee
• Today’s Instructor– Lt Don Kaderabek
• Niles FD• SUFD Staff Instructor
Course Name – Unit Title
Today’s Objectives
The Rescue Technician candidate shall:
Correctly describe the process of stabilization of the machinery or equipment in order to prevent unwanted movement or operation.
Correctly identify the need for a secondary survey of the area of operation, and the stabilized equipment or machinery.
Course Name – Unit Title
Today’s Objectives
The Rescue Technician candidate shall:
Correctly identify the four factors to be addressed in the extrication of a patient from machinery or equipment.
Correctly identify the three basic means which can be used to extricate the patient from the machinery or equipment.
Course Name – Unit Title
The Rescue Technician candidate shall:
Correctly identify the need for retrieval, and cleaning of tools, as well as their return to service.
Correctly describe the process of surveying the scene to ensure that it is left in a safe, and secure manner.
Today’s Objectives
Course Name – Unit Title
Practical Skill Demonstration
• Extricate an extremity that is trapped in a belt driven conveyor or roller conveyor with the tools normally found on the first arriving fire company.
Course Name – Unit Title
References
• NFPA 1006– Professional Qualifications for Rescue
Technician
• NFPA 1670– Training Requirements for Technical
Rescue Personnel
• Machinery Extrication Objectives
Course Name – Unit Title
Machinery Rescue Potential
• Where in your community or mutual aid response area
• What are your rescue capabilities– Heavy lifting– Cutting operations– Disassembly– Stabilization– Securing energized equipment
For Equipment and Components that may weigh several thousand
pounds to several tons!!
Course Name – Unit Title
Types of Incidents
• Arm in dough press• Arm in printing press• Child stuck in a safe• Finger stuck in fuel fill port• Child’s leg in bicycle spokes
Course Name – Unit Title
Tools Needed
• Battery Operated Tools– Reciprocating
– Impacts
– Drill
– Circular saw (metal cutting)
• Wood & Steel Wedges
• Lock-out / Tag-out Equip.
• Saw
• Chains
• Soap Solution • Pry bars• Hydraulic tools
– Spreader– Rams– Cutters
• Air tools– Bags– Chisel– Ratchet / socket
• Assorted Hand Tools– screw drivers, wrenches,
pliers, hammers
Course Name – Unit Title
Course Name – Unit Title
Pre-Incident Planning
• Due to the variety of equipment, specific rescue techniques will vary
• Pre-planning is key to success• Differs from procedural approach as in
vehicle extrication
• Plan should consider:• Maintenance personnel• Location of Operating Instructions and
manuals
Course Name – Unit Title
Pre-incident plan
• Plan should consider:– Number, types, locations of
machinery at specific location– Types of power sources and their
cutoffs– Hazard potential of materials or
chemical used
Course Name – Unit Title
Pre-incident plan
•Plan should consider:•Maintenance personnel on-site•Locations of diagrams or drawings•Equipment on hand that can be used
•Manufacturer contact information
Course Name – Unit Title
Industrial Extrication
• Scene survey– First step in any extrication– Use same concept as auto
extrication– Rescue officer and one rescuer
should proceed to the scene while rest of team waits for further instructions
Course Name – Unit Title
Industrial Extrication
• Scene survey– Rescue officer evaluates:
•Condition of victim (ABCs)•Degree of entrapment•Number of rescuers required•Type of equipment needed•Any special personnel or equipment needed
Course Name – Unit Title
Industrial Extrication
• Scene survey– Rescue officer evaluates:
•Any expert assistance required•Any other hazards present•Level of fire present•Assume all electrical situations are energized
•Cordon off the incident site
Course Name – Unit Title
Industrial Extrication
• Seek expert assistance– Equipment may be beyond
expertise of rescue personnel– Experts may include:
•Equipment operators•Maintenance personnel•Equipment manufacturer
Course Name – Unit Title
Industrial Extrication
• Neutralize power sources– Shut down power when working
around machinery– Ask if machine is full cycle/press type
that must complete its full range of motion before it can be stopped
– Primary power source is normally electrical
Course Name – Unit Title
Industrial Extrication
• Neutralize power sources– Identify other power sources used
by the machinery•Hydraulic (fluids under pressure)•Pneumatic (compressed air)•Stored energy in springs•Potential energy from suspended parts
Course Name – Unit Title
Industrial Extrication
• Neutralize power sources– If safe to isolate power, lockout/tagout
IAW 29 CFR 1910.147 and local SOPs•Station a rescuer at power source
with a radio•Isolate any other power sources•Prevent any source of movement•Block parts
Course Name – Unit Title
Industrial Extrication
• Stabilize Machinery– The majority is accomplished
during neutralization– Further stabilization may be
needed– Cribbing used for automobiles may
not be sufficient
Course Name – Unit Title
Industrial Extrication
• Stabilize Machinery– Survey again
•After power neutralization and stabilization, victim may be able to be freed
•Repeating these steps may point out more problems than first realized
Course Name – Unit Title
Industrial Extrication
• Extricate the victim– Extrication begins only after zero
mechanical state achieved– 4 critical factors to consider
•Time•Victim•Rescuer•Machine
Course Name – Unit Title
Industrial Extrication
• Extricate the victim– Zero mechanical state means there
is no way the machine can operate without the systems being restored
Course Name – Unit Title
Extricating the Victim
• Industrial extrications fall into 3 categories:– Manipulative– Disassembly– Force the machine
Course Name – Unit Title
Industrial Extrication
•Manipulative•Simplest and quickest•Where victim is manipulated•Where machine is manipulated
•Limited to degree of entrapment
Course Name – Unit Title
Industrial Extrication
•Disassembly–Most common approach–May require special tools
Course Name – Unit Title
Industrial Extrication
•Force the machine–Least desirable–Ensure you have appropriate tools for the job
Course Name – Unit Title
Industrial extrication
• Equipment retrieval– Rescuer safety is of primary
importance– If equipment cannot be moved
without endangering rescuers, leave it in place
– Inspect equipment for damage and service as required
Course Name – Unit Title
Industrial extrication
• Securing and restoring the scene– Local protocol dictates who is to
restore an emergency scene– When all hazards are eliminated,
lockout/tagout devices can be removed at the discretion of the IC or plant manager
Course Name – Unit Title
Industrial extrication
• Securing and restoring the scene– If any hazards still exist
•Inform owner/manager•Review actions taken by rescuers•Review suggestions to prevent future incidents
•Have owner/manager sign written release
Course Name – Unit Title
MR. TASK
Medical degree of patient and degree of entrapment
Rescue personnel needed to complete the job
Type and amount of extrication equipment needed
Assistance from haz-mat, medics, doctors, etc.
Specialized equipment and/or operators
Kind of life hazards presentfire, haz-mat, water, electricity, etc
Course Name – Unit Title
“LOCK OUT”
Course Name – Unit Title
Additional power sources which may need to be neutralized:Equipment
Hydraulic fluids under pressure
Compressed air
Energy stored in springs
Potential energy from suspended parts
Any other sources which might cause unwanted movement
ADDITIONALPOWER SOURCES
Course Name – Unit Title
CONSIDER.....
Factors which need to be considered during the secondary survey:
Patient
Need for pain management
Possibility of drastic, life-saving measures
Need for psychological support for victim(s)
Course Name – Unit Title
MEANS OF EXTRICATION
ManipulativeExtrication
Course Name – Unit Title
MEANS OF EXTRICATION
Disassembly of the Machine
Course Name – Unit Title
MEANS OF EXTRICATION
Forcing the Machine
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
BLR’sSafety Training Presentations
Control of Hazardous Energy (Lockout/Tagout) 29 CFR 1910.147
Course Name – Unit Title
What Is Lockout/Tagout?
• Referred to as LOTO• Blocks flow of energy from power
source to the equipment• Provides means of warning (tag)
Course Name – Unit Title
• 29 CFR 1910.147–Control of Hazardous Energy
• Covers operators and service personnel• Requires training of employees
Regulatory Requirements
Course Name – Unit Title
• Locks• Blocks• Chains• Multilock hasps• Wheel valve covers• Ball valve covers
Types of Lockout Devices
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Requirements For Lockout/Tagout Devices
They must be:• Durable• Standardized• Substantial• Identifiable
Course Name – Unit Title
Energy Sources
• Electricity• Hydraulic• Pneumatic• Steam • Thermal• Chemical• Gravity
Course Name – Unit Title
Typical Equipment Requiring LOTO
• Presses• Saws• Conveyors• Pumps• Production
Equipment• Trash
Compactors• Ovens
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
When Must LOTO Be Used?
When servicing or maintaining equipment where:
• Hazardous energy exists• Unexpected start-up could occur• Either of these could harm an
employee
Course Name – Unit Title
LOTO Shall Be Used When:
• Employees are required to remove or bypass a safety device
• Employees are required to place any part of their body in harm’s way
• Employees are exposed to hazardous energy
Course Name – Unit Title
LOTO Exceptions
• Work where hazardous energy does not exist
• Activities performed during routine production processes
• Work on cord-controlled devices• Hot tap operations where shutdown
is not feasible
Course Name – Unit Title
Typical LOTO Procedures
• Performing a shutdown• Isolating equipment• Applying and removing lockout
devices• Safely releasing stored energy
Course Name – Unit Title
Affected Employees
Employees who• Operate• Work around• Occasionally adjust equipment that is
subject to LOTO
Course Name – Unit Title
Authorized Employee• Maintains equipment• Services equipment• Is trained to use LOTO
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Company Responsibilities
• Ensure de-energization of equipment• Ensure employee awareness• Provide appropriate levels of training• Review program effectiveness• Maintain and revise program• Administer appropriate disciplinary
actions
Course Name – Unit Title
Maintenance Responsibilities
• Lockout/Tagout prior to service or repair
• Remove or cut locks off isolation devices
• Ensure proper training of authorized employees
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Affected Employee Responsibilities
• Notify maintenance, etc., when equipment needs repair or adjustment
• Leave all LOTO devices in place• Verify equipment is safe to operate
following LOTO• Follow all safety rules while operating
the equipment
Course Name – Unit Title
Authorized Employee Responsibilities
• Repair or service equipment as needed
• Ensure that all energy sources are locked out
• Test equipment to verify residual energy is dissipated
• Place a “Danger—Do Not Operate” tag on equipment
Course Name – Unit Title
Authorized Employee Responsibilities (cont.)
• Obtain assistance when necessary
• Remove locks and/or tags following LOTO
• Coordinate multi-shift repair
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Training Requirements
• Authorized employees—initially and at least annually
• Affected employees—at least initially• Authorized and affected—whenever
changes are made to jobs or procedures
• Authorized and affected—when program deficiencies are noted
Course Name – Unit Title
How to Perform LOTO Safely
• Follow company safety procedures for LOTO
• Refer to procedures on how to lockout specific equipment
• Keep everyone informed when equipment is repaired or serviced
• Stay alert• Use common sense
Course Name – Unit Title
Quiz1. The LOTO standard is designed to block the
flow of energy to a piece of equipment. True or False
2. Types of LOTO devices include _______, _______, and _______.
3. It is not required that a company have written procedures for proper lockout/tagout. True or False
4. An authorized employee is one who _________ or _________ the equipment.
5. If a safety device is removed from a piece of equipment, LOTO is not required. True or False
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Quiz (cont.)
6. Typical energy sources found on equipment include: _______, _______, and _______.
7. Affected employees are those who operate or work around a piece of equipment. True or False
8. As long as an employee has had training on LOTO, the employer or company has no additional responsibilities under 1910.147. True or False
9. Training for authorized employees must be conducted _________ and at least _________.
10. Locks should always stay on the equipment during a shift change. True or False
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Quiz Answers 1. True. It should block the flow of energy and provide
a means of warning.
2. Types of LOTO devices include locks, blocks, chains, hasps, wheel valve covers and ball valve covers.
3. False. If lockout is required, a company must have a written program and procedures.
4. An authorized employee is one who services or maintains the equipment.
5. False. LOTO is required when a safety device is removed, an employee is in harms way or when employees are exposed to hazardous energy.
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Quiz Answers (cont.)
6. Typical energy sources include: electricity, hydraulics, pneumatics, steam, thermal, chemical and gravity.
7. True. Affected employees are those who operate or work around the equipment.
8. False. Training is just one of the responsibilities of a company.
9. Training for authorized employees must be conducted initially and at least annually.
10. False. Locks should be removed during shift change and the shift coming on duty should place their locks on the equipment.
11006115 Copyright 1999 Business and Legal Reports Inc.
Course Name – Unit Title
Types of Machinery
Industrial, Construction & Agricultural
Course Name – Unit Title
Milling Machine
Course Name – Unit Title
Break Press
Course Name – Unit Title
Lawn Tractor
Course Name – Unit Title
Know The Controls
Course Name – Unit Title
Tractor Rollover!
Course Name – Unit Title
Tractor!
Course Name – Unit Title
Remote Locations
Course Name – Unit Title
How do we shut it down?
Course Name – Unit Title
How do we stabilize?
Course Name – Unit Title
How do we stabilize?
Course Name – Unit Title
How do we stabilize?
Shut Down
Chain Tires
Side Stabilization
Course Name – Unit Title
How do we stabilize?
Course Name – Unit Title
Plan – A, B, C
Course Name – Unit Title
Plan – A, B, C
Bottle Jacks have a limited lift height and
small surface contact
Course Name – Unit Title
Mangled
Course Name – Unit Title
Mangled
Course Name – Unit Title
Find The Part
Course Name – Unit Title
Mangled
Course Name – Unit Title
Mangled
Course Name – Unit Title
Find The Part
Course Name – Unit Title
In Plant Facilities
• Always check with on site maintenance personnel , they know the LOTO points and hazards of the equipment
• For LOTO consider a computer terminal in todays automated world to shut down machinery production lines.
• Electric fans and or smoke ejectors may be used to reduce the temperature in the machinery area.
Course Name – Unit Title
Course Name – Unit Title
Course Name – Unit Title
Walmart
• When shutting down the power in a Walmart you must contact the corporate office.
• They have an overide to all stores at corporate.
• If you shut the power down locally it can be brought back on remotely without your knowledge!
Course Name – Unit Title
Safety
• Slick oily surfaces are common in most plants-consider using some oil dry to reduce personnel and air bags from slipping.
• Consider the use of overhead cranes for use and as anchor points.
• Confined spaces may require monitoring and ventilation.
Course Name – Unit Title
Safety
• Other machines in operation may have to be shut down due to vibration, noise or rescuer safety.
• Have a plan to guide incoming resources and EMS, sometimes there is a closer entrance than the one you were directed to.
• When working with heated objects-remember latex EMS gloves can deteriorate due to heat.