COURSE BROCHURE - PMV · This course is for anyone involved in the “hands-on” side of hazardous...

RTO 51178

COURSEBROCHURE

UEE42611

CERTIFICATE IV IN HAZARDOUS AREAS

- ELECTRICAL

15 Years ofVocational

Training Experience

† Career Oriented

† Affordable

† Nationally Recognised

Project Management Vision

$

† To undertake work on Electrical Equipment in Hazardous Areas (EEHA) that meets the requirements of AS/NZS 60079.14 and AS/NZS 60079.17.

† To read Ex rated equipment Name plate and Certificate of Conformity

† To select, install, test, maintain and inspection Ex equipment † To make an Ex d Barrier Gland† To obtain isolations, test and undertake detailed inspection of Ex installation

OBJECTIVES

OUTCOME

SCOPE

TARGETWORKFORCE

Full qualification – UEE42611 Certificate IV in Hazardous Areas- ElectricalStudents who hold an unrestricted electrical license issued by a state or Territory and are successfully competent in both theoretical and practical training, completing all units of competency in the training package (refer http://training.gov.au/Training/Details/UEE42611), will receive the full qualification.

This qualification provides competencies to select, install, test, maintain and inspect electrical equipment in hazardous areas (EEHA) in a gas and dust atmospheres. It includes ERAC requirements for an 'Electrician's licence'.

This course is for anyone involved in the “hands-on” side of hazardous area electrical work, i.e. the installation, maintenance or inspection of hazardous area electrical equipment. Electricians and instrument technicians are the most common attendees, but we also train electrical engineers who perform inspections as part of their role. The course covers the theory and practice of field work in hazardous areas.

PRE-REQUISITESThe course is post-trade training, so we usually require a current electrical license (any Australian state or territory) or instrumentation trade certificate as a pre-requisite. Electrical engineers meet the pre-requisites for the inspection related units only.

LOCATION

Delivered at one of PMV's national training centres (Perth, Brisbane and Adelaide), or at a client's facility

CERTIFICATE IV IN HAZARDOUS AREAS- ELECTRICAL

UEE42611

COURSE DURATION LOCATION6 Days

COURSE COST$ 2,550 Training centers at

Perth, Brisbane, Adelaide,or at Client's facility

08 9317 2146 [email protected] www.pmv.net.au

Project ManagementVision

http://training.gov.au/Training/Details/UEE42611

REFRESHERTRAINING

TRAININGMETHOD

TRAININGCONTENT

COURSE STRUCTURE

WHY PMV?

In accordance with the AS/NZS 60079.14 requirement for continuing education, PMV recommends that the EEHA Installation and Maintenance competencies are refreshed every 3 years.

Blended delivery of 60% theory and 40% practical training with equipment that you are likely to see in a typical industrial environment with electrical equipment in hazardous areas (EEHA). The course includes in-class progressive assessment; short answer tests on hazardous area fundamentals; equipment marking; equipment certification; and, device interpretation.

You will undergo one on one practical training with industry experienced, qualified Electrical Professional Trainers with hands on experience in installation, inspection and remediation work in Hazardous areas. The training will include inspection on the purpose-built hazardous areas skids in the following areas:1. Principles of hazardous area classification; 2. Explosion-protection techniques; 3. Hazardous area standards and Codes of practice4. Reading and understanding hazardous area classification drawings5. Name plate reading exercise for Ex e, Ex n, Ex d, Ex i, Ex m, Ex t techniques;6. Reading Certificate of Conformity;7. Specific installation requirements for different types of Ex techniques;8. Equipment selection, installation, breakdowns and maintenance

requirements; 9. permit to work and safe isolations and testing; 10. Making up of Ex d Barrier Gland; and11. Visual/ Close/ Detailed inspection at PMV Training Bays (or at site on as

installed equipment) for Ex d, Ex i and Ex e and list the required remedial actions.

PMV offers a small size class with flexible training to accommodate difficult rosters / work schedules.

CERTIFICATE IVIN HAZARDOUS AREAS

- ELECTRICAL


† Fast tracked courses (4.5 Days + 1.5 Days face to face)† Training is aligned to the requirements of latest IEC/AS/NZS 60079.14:2017,

60079.17:2017 and AS/NZS 4761.† All the courses have been developed in consultation with industry experts† You will undergo one on one practical training with industry experienced,

qualified Hazardous Area and Electrical Professional Trainers



UEENEEE038B

UEENEEE124A

UEENEEE117A

UEENEEK145A

UEENEEM080A

UEENEEE101A

UEENEEE102A

UEENEEE104A

UEENEEE105A

UEENEEE107A

UEENEEE137A

UEENEEG006A

UEENEEG033A

UEENEEG063A

UEENEEG101A

UEENEEG102A

UEENEEG103A

UEENEEG104A

UEENEEG105A

UEENEEG106A

UEENEEG107A

UEENEEG108A

UEENEEG109A

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Electrical License

Participate in development and follow a personal competency development plan

Compile and produce an energy sector detailed report

Implement and monitor energy sector OHS policies and procedures

Implement and monitor energy sector environmental and sustainable policies and procedures

Report on the integrity of explosion-protected equipment in a hazardous area

Apply Occupational Health and Safety regulations, codes and practices in the workplace

Fabricate, assemble and dismantle utilities industry components

Solve problems in d.c. circuits

Fix and secure electrotechnology equipment

Use drawings, diagrams, schedules, standards, codes and specifications

Document and apply measures to control OHS risks associated with electrotechnology work

Solve problems in single and three phase low voltage machines

Solve problems in single and three phase low voltage electrical apparatus and circuits

Arrange circuits, control and protection for general electrical installations

Solve problems in electromagnetic devices and related circuits

Solve problems in low voltage a.c. circuits

Install low voltage wiring and accessories

Install appliances, switchgear and associated accessories for low voltage electrical installations

Verify compliance and functionality of low voltage general electrical installations

Terminate cables, cords and accessories for low voltage circuits

Select wiring systems and cables for low voltage general electrical installations

Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

Develop and connect electrical control circuits

Core Competency Standard UnitsAll Core competency standard units to be achieved Delivery Method


- ELECTRICAL

UEENEEM020A

UEENEEM021A

UEENEEM022A

UEENEEM024A

UEENEEM025A

UEENEEM026A

UEENEEM028A

UEENEEM029A

UEENEEM030A

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

Attend to breakdowns in hazardous areas - gas atmospheres

Attend to breakdowns in hazardous areas - dust atmospheres

Attend to breakdowns in hazardous areas - pressurisation

Install explosion-protected equipment and wiring systems - gas atmospheres

Install explosion-protected equipment and wiring systems - dust atmospheres

Install explosion-protected equipment and wiring systems – pressurisation

Maintain equipment in hazardous areas - gas atmospheres

Maintain equipment in hazardous areas - dust atmospheres

Maintain equipment in hazardous areas - pressurisation

Group B – Qualification Elective Units Delivery Method


UEENEEM039A

UEENEEM040A

UEENEEM041A

UEENEEM042A

UEENEEM044A

UEENEEM045A

UEENEEM046A

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

PMV Training

Conduct testing of hazardous areas installations — gas atmospheres

Conduct testing of hazardous areas installations — dust atmospheres

Conduct testing of hazardous area installations - pressurisation

Conduct visual inspection of hazardous areas installations

Conduct detailed inspection of hazardous areas installations - gas atmospheres

Conduct detailed inspection of hazardous areas installations - dust atmospheres

Conduct detailed inspection of hazardous areas installations - pressurisation

Group C – Qualification Elective Units Delivery Method

[email protected] www.pmv.net.au


- ELECTRICAL



Perth10/22 Shields Crescent Booragoon, WA 6154, Perth.Tel: (08) 9317 2146 and (08) 9317 2147

BrisbaneUnit 14, 720 MacArthur Ave Central, Pinkenba, QLD, 4008 Tel: (07) 3255 5952

Adelaide66 Hughes Street, Mile End, SA, 5031Tel: (08) 9317 2147

COURSE BROCHURE - PMV · This course is for anyone involved in the “hands-on” side of hazardous...

Documents

Transcript of COURSE BROCHURE - PMV · This course is for anyone involved in the “hands-on” side of hazardous...