COUPETORINO Project
-
Upload
skorpion-engineering-srl -
Category
Automotive
-
view
58 -
download
0
Transcript of COUPETORINO Project
Skorpion Engineering Ltd.
developed for the project
Coupe Torino:
1. 3D scanning of the scale
model
2. Mathematics Reconstruction
3. Mathematics 3D Modeling
according to the style
indications provided by the
IAAD Students,
STUDIOTORINO and
Mercedes.
4. Realization of the 1:4 scale
model in Stereolithography
3D scanning of the scale model
By the use of the GOM Atos
scanning system (a system of
high-resolution scan which allows
to capture all the style lines with
the highest level of accuracy) the
scanning of the Mercedes SL
scale model was carried out.
Mathematics Reconstruction
The car 3D model was then
processed using the GOM
software which contributed to
create the polygonal mesh
starting from the points cloud.
Mathematics Reconstruction
From 3D scanning, it was
possible to extrapolate the style
curves to be used for modeling
and subsequent prototyping.
Mathematics 3D Modeling
according to the style
indications provided by the
IAAD Students, STUDIOTORINO
and Mercedes.
Mathematics were modeled by one
of our designers according to the
2D model created by the Turin
IAAD students and under the
supervision of STUDIOTORINO
and Steffen Koehl, Mercedes-Benz
Global Director of Advanced
Design.
The hardest work was definitely
the modeling of the rear of the
vehicle.
The modeling work was carried out
with the maximum care and
attention to every style detail.
Realization of the 1:4 scale
model in stereolithography
The 3D model was then placed
on the stereolithography machine
to be realized in a single piece.
Our stereolithography is different
from the others for the following
reasons:
a. Placement
b. Material
c. Size
Placement
The 3D model is placed in
machine in order to create the
smallest possible number of
supports so as to require a
minimum manual finishing.
Material
Our stereolithography models are
made with a unique material: the
New White.
The New White Stereolithography
is stronger than the standard
stereolithography and it was
developed by Skorpion especially
for large prototypes.
Size
Skorpion owns a
stereolithography machine able to
produce monolithic pieces up to
2000x1000x1000 mm with the
great advantage of avoiding
assembly and bonding of multiple
pieces for the realization of large
size particulars.
Rough model
From the pictures you can see
how the model (as realized by the
machine) appears with an
excellent level of quality and
results suitable for any type of
finish.
Finished Model
This is the finish chosen for the
presentation of the model.
Skorpion Engineering is able to
finish the prototypes with different
types of materials ranging from
wood to carbon and from classical
metallization to the innovative
Metal Plating.
Metal Plating is a special
technology that gives the effect of
the metal to plastic not only to
view, but also to the touch.