Truck mixer generation 05

Cost-effective concrete transport

The new generation of truck mixer2

The new generation of truck mixer

LICRO 500 drum steel quality for a long service life

Higher payload thanks to lower unladen weight

New oil cooler unit with capacity reserves

Different stowage options upon request

Flexibility due to new platform concept

In the development of the new generation of truck mixer from Liebherr, emphasis was placed on safety, ergonomics and cost effectiveness. The greater customer benefits are primarily realised in a higher payload, lower cost of cleaning and superb handling.

More innovation, more benefits

The new generation of truck mixer 3

Increased water capacity

Wide roller bearing for good driving stability

Easy to clean due to large flat surfaces

Excellent ergonomics for the operator

Single wheel mudguard made of plastic

SafetyGreater safety during operation due to:• Litronic-EMC (option)• Placement of items in stowage

boxes (option)• Excellent driving stability

Ergonomics• Especially user-friendly design

of the ascent and all control units• Smooth surfaces without projecting

edges for ease of cleaning

Cost-effectiveness• Lower weight for a higher payload• Durable components and short cleaning

times increase cost effectiveness

The new generation of truck mixer4

LICRO 500drum material

Greater cost effectiveness

Newly developed special steel with extremely hard components (titanium carbonitrides) and an optimised chromium content ensure a long drum service life – and thus low maintenance and repair costs. Specially developed for applications in the truck mixer exclusively for Liebherr.

The new generation of truck mixer 5

Electronic mixer controlThe optional Litronic-EMC mixer control allows demand-based control of the diesel engine speed and torque. This ensures significant savings in fuel and less wear on the drive train. Thanks to the “Constant Speed Drive” function, the service life of the drum is extended due to reduction of the drum revolutions during each tour.

Increased water capacityDue to the increased water capacity, even better safety and reserves when transporting liquid consistencies.

Telematics functionsThe telematics package (option) ensures greater cost effectiveness in the fleet and cost savings due to efficient vehicle planning.

Greater payloadWeight of the basic unit reduced by approx. 250 kg, taking service life and reliability into account.

Advantages of the Litronic-EMC• Lower fuel consumption• Longer service life of the drive train• Less wear of the drum• Better driving behaviour when the drum is loaded• Intuitive and convenient one-hand operation

The new generation of truck mixer6

Versatile and user-friendly

Concrete discharge partsPosition of the swivelling chute shifted upwards by 80 mm for better flowing angle when discharging concrete into a crane bucket, for example.

Ladder platformLadder platform enlarged and ergonomically revised with sliding ladder (lightweight ladder section made of aluminium).

Swivelling support bracketThe swivelling support bracket (option) can be slewed completely to the side, without protruding beyond the outer dimensions of the vehicle.

The new generation of truck mixer 7

Innovative accessories conceptThe innovative platform solution allows flexible and safe instal-lation of accessories and attachment parts. All requirements are met in the positioning of toolboxes, holders, chutes, etc.

Operation systemAll important operating elements are ergonomically grouped to the side and rear outside of the direct hazard zone.

Single wheel mudguardSingle wheel mudguards made of durable plastic are resistant and provide better spray protection.

New oil cooler unit• Greater cooling capacity, infinitely variable

controlled fan speed and smooth start (option)• Low noise emission

Advantages of the platform concept• Simple and flexible installation of stowage boxes• Easier handling of the extension chutes• Protected cable routing in the profile of the platform• Water filler pipes conveniently and ergonomically positioned• Subsequent attachment of options also possible

The new generation of truck mixer8

The innovative truck mixer conveyor LTB

The new generation of truck mixer 9

The Liebherr LTB conveyor can be attached to or removed from the truck mixer in a matter of minutes. This too makes its operation even more costeffective. Its closed structural ele-ments and panels make the conveyor easy to clean quickly too.

Ready for use in just a few minutes The Liebherr LTB conveyor is ready for use in a matter of minutes and cuts cost by speeding up the discharge process.

Any materialdelivered to any point You can use the Liebherr LTB conveyor to deliver all kinds of construction materials to precisely the required point.

Well-proven,reliable technical design Its mechanical, hydraulic and control-system components have been designed for reliable operation and long life.

The new generation of truck mixer10

Satisfied customers all over the world

The new generation of truck mixer 11

Liebherr-Mischtechnik GmbHPostfach 145, D-88423 Bad Schussenried +49 7583 949-0, Fax: +49 7583 949-396www.liebherr.com, E-Mail: info.lmt@liebherr.com

Prin

ted

in G

erm

any

by L

ache

r B

K

LMT-

8203

111

05_

02.1

9_en

Sub

ject

to te

chni

cal m

odifi

catio

ns.

Technology that inspires

¹ Nominal filling in compacted mixed concrete.² Measured in accordance with DIN 459-1 at min. 2 drum rotations per minute. The given values for capacity and water volume only apply to

a horizontally aligned mixer frame. A deflection of the frame during loading is not taken into account here and may negatively affect the water volume under certain circumstances. The real maximum filling capacity with concrete depends on the consistency and the rheological charac-teristics of the concrete. The topology of the road and the driveability also influence the maximum loading volume.

³ Weight details for basic unit with chassis power take-off (PTO), incl. 2 extension chutes, compl. assembled/ready for operation in accordance, deviations +/- 5 %.

Technical dataType HTM 705 HTM 805 HTM 905 HTM 1005 HTM 1205Nominal filling¹ 7 m³ 8 m³ 9 m³ 10 m³ 12 m³Water capacity² 8.4 m³ 9.3 m³ 10.5 m³ 11.3 m³ 13.3 m³Geometric drum capacity 13.2 m³ 14.8 m³ 16.0 m³ 17.2 m³ 20.4 m³Clearance height without frame 2,484 mm 2,488 mm 2,544 mm 2,600 mm 2,617 mmHopper filling height without frame 2,448 mm 2,464 mm 2,519 mm 2,576 mm 2,570 mmAssembly weight³ Standard 3,385 kg 3,650 kg 3,780 kg 3,890 kg 4,440 kgAssembly weight³ Lightweight 3,095 kg 3,235 kg 3,320 kg 3,495 kg 4,030 kg