Corsage Construction Step-By-Step Directions. STEP 1: Select Materials 1 Carnation 1 Stem of Leather...
-
Upload
dwight-york -
Category
Documents
-
view
217 -
download
0
Transcript of Corsage Construction Step-By-Step Directions. STEP 1: Select Materials 1 Carnation 1 Stem of Leather...
Corsage Construction
Step-By-StepDirections
STEP 1: Select Materials
1 Carnation1 Stem of Leather Leaf Fern1 Sprig of Baby’s Breath1 Yard of #3 Ribbon1 (26 gauge) WireFloral tape1 Corsage Pin
1 Carnation
Choose flowers that are in good condition.Choose a flower color that is suitable for the occasion.Choose a flower that is a good size for the wearer.
1 Stem Leather Leaf Fern
Choose a straight stemmed piece from the tip of the fern or use a side branch.Choose leather leaf fern that is in good condition.
1 Sprig Baby’s Breath
Choose flowers that are in good shape.
1 Yard of #3 Ribbon
Choose a color that compliments the flower.
Wire
Use #26 wire for bowsUse #22 wire for flowers
Corsage Pins
Use Pearl tipped pins.
Step 2: Wire and Tape Carnation
Remove flower stemWire using the piercing methodTape to cover all of the wire
Step 3: Select and Tape Baby’s Breath and Foliage
Use 3-4” piece of foliageRemove leaves from bottom 1”Place foliage behind carnation.Use small sprigs of baby’s breath above and below carnationPosition and tape both to carnation
Step 4: Make a Bow
Use 1 yard of ribbonUse # 26 gauge wireTape the wireMake with at least 4 loops as directed in a previous lesson
Step 5: Add Bow to Corsage
Separate wires holding bowWrap wires around corsage stem Clip wires to 1” and lay flat against stem.Tape the stem to cover the wires
Step 6: Add Finishing Touches
Hook, Curl, or Curve the end of the stemAdd the Corsage PinPlace in Cooler
Step 7: Clean the Work Area
Put away all materialsSweep and clean up area.