Corrosion Under Insulation: A Review
-
Upload
alfonsius-billy-joe-haslim -
Category
Documents
-
view
264 -
download
26
Transcript of Corrosion Under Insulation: A Review
CORROSION UNDER INSULATION: A REVIEW
Monthly Meeting
NACE Student Chapter
Universitas Indonesia
Tuesday, 24th of May 2012
Konten Presentasi
• Pendahuluan
• Definisi
• Mekanisme
• Contoh Foto
• Pengendalian
• Inspeksi
Pendahuluan
Pengertian
• CUI adalah jenis korosi yang terjadi akibat
terjebaknya air di dalam isolasi (Rockwool)
sehingga menyebabkan proses korosi
berlangsung.
• Jenis korosi ini adalah bentuk korosi yang
terlokalisasi.
• Korosi jenis ini bisa menyebabkan
kegagalan pada bagian yang tidak diawasi
secara intensif.
Pengertian
• CUI ini susah untuk ditemukan karena
adanya insulasi yang menutupi, hingga
terjadi kegagalan sebelum sempat dideteksi.
• Adanya air adalah inti dari CUI ini. Perawatan
khusus harus dilakukan selama proses
design agar air tidak bisa masuk secara
langsung ataupun tidak langsung melalui
proses kalipalisasi.
Beberapa gambar CUI
Mekanisme
PREVENTING CUI
Insulation Selection
Maintenance Practices
Weather Barriers
Protective Paints and Coatings
Equipment Design
Insulation Selection
• Such as calcium silicate, glass fiber and, to
some extent, cellular plastic foams absorb
and retain liquids and vapors.
• The only fully nonabsorbent insulation is
cellular glass. Cellular glass should be
used where corrosive or flammable liquids
are present.
Equipment Design • The proper design of insulation for
pressure vessels, tanks and piping
includes consideration of the support and
connection of the material.
Protective Paints and Coatings • Coating system must protect for long periods against water or
corrosives.
• An epoxy or epoxy-phenolic should be applied in two coats
over an abrasive blast cleaned surface.
• Recoating is done every 10-15 years.
• Coating Criteria :
1. Withstand boiling water.
2. Heat and thermal shock resistance.
3. Direct application to hot steel (up to 500°F).
4. Excellent constructability when applying to ambient steel.
5. High film capability while applying to directly to hot steel.
6. Simple to use.
7. Low VOC content and environmentally safe
Weather Barriers • Provides the primary barrier to water.
• Can be inspected quickly and repaired
economically.
• Keep liquids and evaporation of any liquid
that manages to get into the insulation
system out.
• Should be durable, offer flame-spread
resistance, and be economical.
• The material must be maintained
periodically (usually, two to five years) to
remain effective.
Maintenance Practices • Routine maintenance is needed to catch
defects due to deterioration or abuse.
MONITORING CUI
• Profile Radiography
• Metode ini umumnya menggunakan
sumber Ir192 , penyinaran dilakukan pada
bagian kecil dari pipa dan menggunakan
blok komparator untuk menghitung
ketebalan pipa. Profile Radiography
metode evaluasi yang efektif untuk
diamater pipa ≤ 8 inci.
• Kelebihan:
• 1. Memberikan informasi ketebalan tanpa
membuka insulasi
• 2. Memberikan informasi penipisan karena
korosi pada permukaan
• luar dan dalam
• Dapat dilakukan pada kondisi on-stream
•
• Kelemahan:
• 1. Hanya dapat diaplikasikan pada bagian
kecil dari pipa
• 2. Mendapatkan hasil cukup lama, adanya
waktu untuk set-up dan
• proses film
• 3. Isu radiasi
Image Scope (Lixi
GadScope):
• Kelebihan:
• 1. Tidak perlu membuka insulasi
• 2. Tidak perlu barikade daerah kerja karena
menggunakan sumber energi yang relatif lebih rendah
•
• Kelemahan:
• 1. Hanya memberikan profil permukaan luar pipa
• 2. Memerlukan sejumlah teknik untuk mendapatkan hasil
yang
• tepat
•
• Keterbatasan:
• 1. Aplikasi terbatas pada diameter ≤ 18
inci