Product catalog

Corrosion stops here!

www.technoProtection.com

(reV 2014)

3

Sacrificial zinc anode in ingot form available in a card-board tube filled with anolyte. The model number cor-responds to the weight and length of the ingot. Ideal for inground metallic watermain accessories.

Sacrificial magnesium anode in ingot form available in a cardboard tube filled with anolyte. The model num-ber corresponds to the weight of the ingot. Ideal for all types of inground infrastructures such as watermains, metallic culverts, guyed tower anchors, etc…

SacriFicial anodeS

Zinc anode in cardBoard tuBe

magneSium anode in cardBoard tuBe

modelS SPeciFicationSAS-06-12-ZT Dimensions 4” dia x 16” length.

Total weight 16 Lb

AS-12-24-ZT Dimensions 4” dia x 28” lengthTotal weight 31 Lb

AS-24-48-ZT Dimensions 4” dia x 52” lengthTotal weight 56 Lb

modelS SPeciFicationSAS-32-MT Dimensions 8” dia. x 28” length.

Total weight 75 Lb

AS-20-MT Dimensions 5” dia. x 64” length.Total weight 85 Lb

AS-17-MT Dimensions 5” dia. x 34” length.Total weight 30 Lb

AS-09-MT Dimensions 5” dia. x 21” lengthTotal weight 18 Lb

AS-05-MT Dimensions 5” dia. x 14” lengthTotal weight 12 Lb

4

The Spin-mag anode was developped following the very high demand in the municipal industry. Considering the growth of utilization of PVC potable water conduit, the soil aggressivity is concentrating on the iron accessories, the fire hydrants and its valves wich reduces considerably the life expectancy of the hydrants. The Spin-mag anode was designed especially for installation without excavation thus permitting prolongation of the life expectancy of the equipments against corrosion.

This anode is so successful that it is now used to protect buried structures where access is limited such as guyed tower anchors, metallic culverts, etc.

Magnesum sacrificial anode espcially designed for installation without excavation.

SPin-mag anode

modelS SPeciFicationSSMP-20 Dimensions 5” dia. x 56” length.

Mag weight 20 Lb

5

The Ring AnodeTM was originally developed in joint ef-fort with our sister company TECHNO PIEUX. Within the continuing philosophy of our company which is to offer durable and solid products the Ring AnodeTM adds sup-plementary protection of the helical piles.

The Ring type sacrificial magnesium anode permits punctual protection of small infrastructures such as helical piles, vents, fill pipes and wharf supports, etc.

Threaded hex head zinc cap - Model 3/4’’ - 175 grams for protection of glands, bolts and screws. Compliant with ASTM B418-88 standard.

ring anode

techno caP

modelS SPeciFicationSRA-1 Dimensions 2” i.d.. x 9” height.

Weight 1 Lb

RA-2 Dimensions 2 ½” i.d. x 3” height.Weight 1 Lb

RA-3 Dimensions 3 ¾” i.d. x 2 ½” height.Weight 1 Lb

RA-4 Dimensions 4 ½” i.d. x 2 ⅜” height.Weight 2 Lb

RA-5 Dimensions 5” i.d. x 2 ⅜” height.Weight 2 Lb

modelS SPeciFicationSZINC T-CAPS ¾-175

For ¾’’ threaded rod.Weight 175 grams

ZINC T–CAPS ⅝-175

For ⅝″ threaded rod. Weight 175 grams

6

Spin AnodesTM are screwable impressed current anodes. They do not require any excavation. These anodes are available in various sizes depending on the current needed to protect the structure.

Originally developed by our engineering department for the protection of helical piles used by our parent company Techno Metal Post, the Spin AnodesTM have experienced such success that they are now applicable and available for the protection of all buried structures.

This type of anode allows the protection of underground structures such as foundation piles, pipes and tanks. The easy installation process requires no excavation. It can be installed anywhere without difficulty, both in urban and in rural areas, as well as in the desert.

Impressed current screw-in type anode installed without excavation. Designed initially for long term protection of helical piles, it was so successful that it is now used to protect iron watermains, aboveground tank bottoms, guyed tower anchors, metallic culverts, elevator cylinder sleeves, etc.

imPreSSed current anodeSSPin anode™

modelS SPeciFicationSSP-2 Dimensions 2” dia. x 65” length.

Total weight 28 Lb

SP-3 Dimensions 3” dia. x 65” length.Total weight 75 Lb

7

The Corro-ProtecTM system prevents and stops internal corrosion of all hot water tanks. It fits to any new or existing tanks and in all types of water.

A Corro-ProtecTM anode installed and maintained in proper operation can provide an infinite life time of the water tanks.

Especially developed to protect the inner wall of water tanks the Corro-ProtecTM anode can prevent and stop corrosion. Fast and easy to install it prolongs the lifetime of hot water tanks.

corro-Protectm anode

modelS SPeciFicationSCP-R For residential water tank from

40 to 100 Gal. Weight 1 lb

CP-C For commercial water tanks over 100 Gal.

Impressed current tubular anode. Normally used in open excavation at the time of installation of the piping. Designed for long term protection of underground infrastructures when excavation work is required. Ideal for all underground infrastructures such as hydraulic elevator cylinders, wharves and marine infrastructures.

tita-tuBe anode

modelS SPeciFicationSTT-2 Dimensions 2” dia. x 30” length.

Total weight 13 Lb

8

Also available are Ferrosilicium, Graphite, Titanium and MMO type anodes in different shapes of lattice, band, bar or wire for particular projects.

When an equipment produces water steam the concentration of mineral salts remains in the water tank thus forming a calcareous deposit on the tank walls. The Techno-Calk System will form a thin coat of protection on the inner surface making it less adherent for deposits. It reduces the frequency and necessity of acid cleanings.

other tYPeS oF anodeS

techno-calK SYStem

modelS SPeciFicationSTC-E For maple grove evaporator

TC-S For steam cooker (hot dog)

TC-R For steam cooker (ribs)

imPreSSed current anodeS

9

Small dimensions current rectifier with a DC de 3.5 Volts / 1 amp capacity. Ideal for long term cathodic protection of small underground infrastructures. Connects directly in a current outlet. Available for 120 Volts or 240 Volts AC power input.

Current rectifier with a 15 Volts / 3 X 2 amps DC capa-city. This rectifier equipped with three circuits (3 zones) allows the utilization of many independently adjustable anodes. Connects directly in a current outlet. Available for 120 Volts or 240 Volts AC power input.

current rectiFierSmini-Protec rectiFier

3Z (techno calk) rectiFierS

modelS SPeciFicationSMini-Protec 120/240

Dimensions 3 ½” H x 3” W x 2 ½” DWeight 0.5 Lb

modelS SPeciFicationS3Z-120 Dimensions 7” H x 11” W x 5” D

Weight 3 Lb

3Z-240 Dimensions 7” H x 11” W x 5” DWeight 3 Lb

The SCS current rectifier is a remote control unit. The SCS current rectifier is a smart rectifier that can be as-sembled and controlled for specific requirements of a particular project. This same equipment can also act as a remote monitoring and control module and is compa-tible with any communication technology.

Models available on request.

ScS rectiFierS

10

Constant current rectifier having a DC maximum capaci-ty of 20 Volts / 7.5 amps or 40 Volts / 15 amps. Ideal for long term cathodic protection of large belowground in-frastructures. Wide choice of metallic indoor or outdoor cabinets with optional fiberglass cabinet. Available for 120 Volts or 240 Volts AC power input.

rVc rectiFierS

modelS SPeciFicationSRVC-20/7.5 Int Dimensions 10” H x 10” W x 7” D.

Weight 22 Lb

RVC-20/7.5 Ext

Dimensions 10” H x 10” W x 7” D.Weight 22 Lb

RVC-20/7.5 Fib

Dimensions 11” H x 13” W x 6” D.Weight 18 Lb

RVC-40/15 Int Dimensions 13” H x 13” W x 10” D. Weight 40 Lb

RVC-40/15 Ext Dimensions 13” H x 13” W x 10” D. Weight 40 Lb

The solar type rectifier fills particular needs where tra-ditional current source is inaccessible. Furthermore, it complies with the actual thought pattern which is centered on long-lasting goods and environment and resources respect.

Models available on request.

Solar rectiFierS

current rectiFierS

11

caBleSFor anode connection use RED cable, for negative use BLACK cable and for reference electrode connection use WHITE cable. These cables can be utilized below ground. Available in 300m spools or by the meter. Multiple types are available upon request.

CB-BP-30-8

Approximately 8 km spool of n° 30 utilized with back pack.

CB-HP-30-1.6

Approximately 1,6 km spool of n° 30 utilized with small hip pack.

HIP PACK

Small potential reading cable distributor bag.

HYKON

Hykon rotating wire wheel. Utilized for continuity test measurements, potential readings (short distance) and cathodic protection survey. Includes 200m of Belden AWG# 18 black cable.

underground caBleS

Potential readingS caBle

modelS SPeciFicationSCB-12-R AWG #12 Cable - RWU90 Red

CB-12-N AWG #12 Cable - RWU90 Black

CB-12-B AWG #12 Cable - RWU90 White

CB-10-R AWG #10 Cable, RWU90 Red

CB-10-N AWG #10 Cable - RWU90 Black

12

reFerence electrodeS

E-POR-MC-CU-P

RE-5 Reference Electrode - CU/CUSO4, Portable, Flat Plug

Techno Protection is proud to be Borin Manufacturing’s official certified distributor in Canada.

For more information about our products please visit the website: www.borin.com/stelth/ or contact our material departement.

E-POR-MC-CU-C

RE-5C Reference Electrode - CU/CUSO4, Portable, Cone Plug

EMB-MC-CU-P

RE-5 Replacement Flat-shaped Plug Assembly

EMB-MC-CU-C

RE-5C Replacement Cone-shaped Plug Assembly

13

High Performance Primer. Zinc rich cold galvanizing compound (97% pure zinc). Its electrochemical action stops atmospheric corrosion. Leak resistant.

galVamac

modelS SPeciFicationSP-GAL-1G #Z20061, 1 Gal. (3.37L). Weight 22 lb

coatingS

Flange iSolating gaSKet KitS

innerlYnX modular mechanical SealS

For more information about our products please visit the website at : www.apsonline/site299.php or contact our material department.

For more information about our products please visit the website: www.apsonline/site298.php or contact our material department.

14

Above ground test station for easy access to the cables. Ideal for tracing wire, anode cable, structure cable and reference electrode.

Techno Protection is proud to be Borin Manufaturing’s official certified distributor in Canada.

For more information about our products please visit the website: www.borin.com/bulletbox/ or contact our material department.

Below ground cathodic protection test stations. To access anode cables, structure cables and reference electrode.

For more information about our products please visit the website: www.handleyind.com or contact our material department.

aBoVe ground

Below ground

teSt StationS

15

taPeSTo view all product offerings, please visit the website of our partners

www.densona.com

www.chasecorp.com

www.innovativemfg.ca

modelS SPeciFicationSDLT2R Denso Tape LT 2’’ x 33’

DLT4R Denso Tape LT 4’’ x 33’

DLT6R Denso Tape LT 6’’ x 33’

DPM175B Denso Profiling Mastic 1.75 KG

DP25T Denso Paste 2.5 Kg

modelS SPeciFicationSPW233 Petro Wrap Tape 2’’ x 33’

PW433 Petro Wrap Tape 4’’ x 33’

PW633 Petro Wrap Tape 6’’ x 33’

PWP2KG Petro Wrap Primer 2 kg

PWP4KG Petro Wrap Primer 4 kg

modelS SPeciFicationSTCH35G475 Tapecoat H35 4” x 75’

A51 Tapecoat Royston Roskote A51

TC-MASTIC Tapecoat TC Mastic

www.scapa.com

modelS SPeciFicationSRW300-122100 Renwrap Tape 300-12 2” x 100’

RW300-124100 Renwrap Tape 300-12 4” x 100’

RW330-35250 Renwrap Tape 330-35 2” x 50’

RW330-35450 Renwrap Tape 330-35 4” x 50’

RW366-256300 Renwrap Tape 366-25 6” x 300’

RW327P-16OZ Renwrap Primer 327 (Aerosol 16 oz, can)

RW327P-1G Renwrap Primer 327 (1 gal.)

16

3M-DBR

Connection kit for inground cable - Model 3M Direct bury splice kit.

SPliceS

Product required to produce exothermic cadweld. Ideal to connect the anode or the nega-tive cables to the structures to be protected. Multiple models available on request.

cadweld connectionS ERICO (Cadweld)

modelS SPeciFicationSPlus-Cu Cadweld Plus remote control unit

CA15PLUSF33 Cadweld Plus welding material - Type F33 for AWG #12-10 cable (Package of 20)

B-133-1H Copper sleeves for AWG #14-12 cable (bag of 100)

B-133-1L Copper sleeves for AWG #14-12 cable (bag of 100)

CAHBA1G Horizontal cadweld mold

CAVHT1G4 Vertical cadweld mold

caBle connectionS

17

MALT-0.5-1.0

Ground clamps for anode connection to metallic parts in diameters from ½” to 1”.

MALT-1.25-2.0

Ground clamps for anode connection to metallic parts in diameters from 1 ¼" to 2".

MALT-2.5

Ground clamps for anode connection to metallic parts 2 ½” dia.

MALT-4.5

Ground clamps for anode connection to metallic parts 4 ½" dia.

ground clamPS (m.a.l.t.)

caBle connectionS

H-CAPHandy Cap (TAPECOAT)

Quick, field-applied corrosion protection to anode and test lead cadwelds on metal piping and tanks.

iSolating material

18

Kit to measure the potentials using a Cu/CuSO4 refe-rence electrode. Allows verification of the good operation of the cathodic protection system.

Potential meaSurement Kit

Royston Roskote Mastic A51+ (TAPECOAT)

Used for protection of ground clamps and cadwelds of cables and anodes on metallic piping.

TC Mastic (TAPECOAT)

Used for protection of ground clamps and cadwelds of cables and anodes on metallic piping.

iSolating material

caBle connectionS

HEAD OFFICE TECHnO PrOTECTIOn QUÉBEC InC.

7069 DEs mOIssOns, LÉvIs, QUÉBEC, CAnADA, G6v 6n41-418-838-1871

www.technoProtection.com