Corrigendum to Analyzing Critical Failures in a Production...
2
Corrigendum Corrigendum to (Analyzing Critical Failures in a Production Process: Is Industrial IoT the Solution?) Shafiq Ahmad , 1 Ahmed Badwelan , 1 Atef M. Ghaleb, 1 Ammar Qamhan , 1 Mohamed Sharaf, 1 Moath Alatefi , 1 and Ammar Moohialdin 2 1 King Saud University, College of Engineering, Department of Industrial Engineering, Riyadh 11421, Saudi Arabia 2 School of Civil Engineering and Built Environment, Science and Engineering Faculty, Queensland University of Technology, Brisbane 4000, Australia Correspondence should be addressed to Shafiq Ahmad; ashafi[email protected] Received 10 April 2019; Accepted 18 April 2019; Published 30 October 2019 Copyright © 2019 Shafiq Ahmad et al. is is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. In the article titled “Analyzing Critical Failures in a Produc- tion Process: Is Industrial IoT the Solution?” [1], Dr. Moath Alatefi and Dr. Ammar Moohialdin were missing from the authors’ list. Dr. Ammar Moohialdin conceived the idea, provided the data, and revised and commented on an earlier draſt of the article. In addition, Dr. Moath Alatefi worked as a statistical consultant during the preparation and the revision of the article. e corrected authors’ list is shown above. e acknowledgments section to be as: “e authors extend their appreciation to the Deanship of Scientific Research at King Saud University for funding this work through research group no. (RG- 1438-089).”. References [1] S. Ahmad, A. Badwelan, A. M. Ghaleb, A. Qamhan, and M. Sharaf, “Analyzing Critical Failures in a Production Process: Is Industrial IoT the Solution?” Wireless Communications and Mobile Computing, vol. 2018, Article ID 6951318, 12 pages, 2018. Hindawi Wireless Communications and Mobile Computing Volume 2019, Article ID 2190612, 1 page https://doi.org/10.1155/2019/2190612
Transcript of Corrigendum to Analyzing Critical Failures in a Production...
CorrigendumCorrigendum to (Analyzing Critical Failures in a ProductionProcess: Is Industrial IoT the Solution?)
Shafiq Ahmad ,1 Ahmed Badwelan ,1 Atef M. Ghaleb,1 Ammar Qamhan ,1
Mohamed Sharaf,1 Moath Alatefi ,1 and Ammar Moohialdin 2
1King Saud University, College of Engineering, Department of Industrial Engineering, Riyadh 11421, Saudi Arabia2School of Civil Engineering and Built Environment, Science and Engineering Faculty, Queensland University of Technology,Brisbane 4000, Australia
Correspondence should be addressed to Shafiq Ahmad; [email protected]
Received 10 April 2019; Accepted 18 April 2019; Published 30 October 2019
Copyright © 2019 Shafiq Ahmad et al. This is an open access article distributed under the Creative Commons Attribution License,which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
In the article titled “Analyzing Critical Failures in a Produc-tion Process: Is Industrial IoT the Solution?” [1], Dr. MoathAlatefi and Dr. Ammar Moohialdin were missing from theauthors’ list.
Dr. Ammar Moohialdin conceived the idea, provided thedata, and revised and commented on an earlier draft of thearticle. In addition, Dr. Moath Alatefi worked as a statisticalconsultant during the preparation and the revision of thearticle. The corrected authors’ list is shown above.
The acknowledgments section to be as: “The authorsextend their appreciation to the Deanship of ScientificResearch at King Saud University for funding this workthrough research group no. (RG- 1438-089).”.
References
[1] S. Ahmad, A. Badwelan, A. M. Ghaleb, A. Qamhan, and M.Sharaf, “Analyzing Critical Failures in a Production Process:Is Industrial IoT the Solution?” Wireless Communications andMobile Computing, vol. 2018, Article ID 6951318, 12 pages, 2018.
HindawiWireless Communications and Mobile ComputingVolume 2019, Article ID 2190612, 1 pagehttps://doi.org/10.1155/2019/2190612
International Journal of
AerospaceEngineeringHindawiwww.hindawi.com Volume 2018
RoboticsJournal of
Hindawiwww.hindawi.com Volume 2018
Hindawiwww.hindawi.com Volume 2018
Active and Passive Electronic Components
VLSI Design
Hindawiwww.hindawi.com Volume 2018
Hindawiwww.hindawi.com Volume 2018
Shock and Vibration
Hindawiwww.hindawi.com Volume 2018
Civil EngineeringAdvances in
Acoustics and VibrationAdvances in
Hindawiwww.hindawi.com Volume 2018
Hindawiwww.hindawi.com Volume 2018
Electrical and Computer Engineering
Journal of
Advances inOptoElectronics
Hindawiwww.hindawi.com
Volume 2018
Hindawi Publishing Corporation http://www.hindawi.com Volume 2013Hindawiwww.hindawi.com
The Scientific World Journal
Volume 2018
Control Scienceand Engineering
Journal of
Hindawiwww.hindawi.com Volume 2018
Hindawiwww.hindawi.com
Journal ofEngineeringVolume 2018
SensorsJournal of
Hindawiwww.hindawi.com Volume 2018
International Journal of
RotatingMachinery
Hindawiwww.hindawi.com Volume 2018
Modelling &Simulationin EngineeringHindawiwww.hindawi.com Volume 2018
Hindawiwww.hindawi.com Volume 2018
Chemical EngineeringInternational Journal of Antennas and
Propagation
International Journal of
Hindawiwww.hindawi.com Volume 2018
Hindawiwww.hindawi.com Volume 2018
Navigation and Observation
International Journal of
Hindawi
www.hindawi.com Volume 2018
Advances in
Multimedia
Submit your manuscripts atwww.hindawi.com
