email simon@coralcovepools.com www.coralcovepools.com

Simon Wooldridge Welcomes you To CoralCovePools, the UK's largest manufacturer of Fibreglass Swimming Pools, We actually manufactured the Swimtek range of Fibreglass Swimming Pools & Spa's for over 18 years. We are now pleased to offer you the Coralcove range of swimspas and swimming pools DIRECT from us the manufacturers of these swimmingpools & swim spa's. We manufacture these on site at Tolgate Ingworth, Norfolk. Buying direct from us means you still get the personal approach from Simon but our prices are considerably lower. Please feel free to contact Simon direct on 07867555068 for 01263761595 for more details of our full range.

The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached,so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation).We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps andfilters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer

you can collect your pool on a suitable vehicle.

Manufacturers of Fibreglass Products & Swimming Pools for over 30 years

POOL CONSTRUCTION

Wall sample of our fibreglass pools showing matched quality materials. CLOSE BEAM CONSTRUCTION MEANS YOUR POOL IS BUILT USING THE STRONGEST METHOD OF CONSTRUCTION AVAILABLE IN THE INDUSTRY. CHEMICAL RESISTANT AND U.V. STABILISED GEL COAT EPOXY BASED VINYL ESTHER RESIN IMPERVIOUS TO WATER AND PROVIDES GUARANTEED OSMOSIS PROTECTION. TWO STRUCTURAL LAYERS OF FIBREGLASS BUILT TO THE REQUIRED STRUCTURAL THICKNESS. NO FILLERS ADDED. SPECIAL BLACK FLOW COAT SEALS ANY EXPOSED FIBRES

The benefits of purchasing a

Through innovative design and manufacturing advantages your

lifetime. The pool walls incorporate fibreglass stiffeners, both the steps and edge beam have a strong non-slip surface and the large radius shape of the pool allows for ease when cleaning with an auto cleaner. A special coating of epoxy based vinyl ester resin protects the interior of your pool against osmosis whilst the formulated black waxed resin flowcoat seals the interior.

POOL CONSTRUCTION

Cross section of structure

NON SLIP SURFACE

FULL DEPTH WALLS

LARGE RADIUS DESIGNED FOR AUTO CLEANERS

FIBREGLASS WALL STIFFENERS

ANGLE BRACE

OUTER EDGE BEAM

FLOWCOAT TO OUTER STRUCTURES

CoralCove pool is designed to last a

CoralCove pool are endless.

email Simon@coralcovepools.comwww.coralcovepools.com

Completely installed & heated showroom pools

It is total commitment to quality that has made CoralCovepools the

fibreglass swimming pools and swimspas.

leading UK manufacturer of

email simon@coralcovepools.com www.coralcovepools.com

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if

you prefer you can collect your pool on a suitable vehicle.The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached,so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation).

We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

The Californian £8995 inc Vat

The pool features:

• Swim jets • Corner seat/step at deep end • Underwater seats with spa jets • Underwater steps at shallow end • Two tone pool shell • Non slip surfaces • Surface skimmer and bottom drain (floor suction point) • Inlet for the warm filtered water to return to the pool • Underwater light to pool and transformer • Circulation pump and sand filter • Chemical start up kit • Cleaning kit • Pipe and fittings to connect up to 5m from the pool to the plant • Roller • Solar cover • Heat exchanger

Manufacturers in fibreglass Products & Swimming Pools for over 30 years

INSTALLATION INSTRUCTIONS –CALIFORNIAN

1. Determine where, within the curtilage of your dwelling, the swimming pool can be accommodated.2. Investigate whether there are any mains services where the pool is to be positioned (i.e. water, sewerage,

land drains, electricity, gas or telephone).3. Consult your local planning authority to determine planning permission or building regulations approval is

required.4. The Datum level for the excavation is the top edge of the pool.5. Determine a relationship between the Datum and the existing ground level. Detail ‘A’ is a guide.6. Excavate carefully, and as close to the installation details as is practical.7. Note that the excavation is shown square and vertical. However, to reduce dig and fill, site adjustments can

allow dig to follow pool contours more closely, retaining a minimum 200mm clearance for surrounding dry sand and cement mix fill.

8. Prepare services (i.e. water and electrics).9. Use timber pegs to accurately establish the 100mm minimum dry sand and cement mix bed level at four

positions within the excavation (A,B,C,D).10. Use a whacker plate to compact the dry sand and cement mix screed.11. Lower pool into excavation and check that the top edge is horizontal and at a height required. Adjust dry

sand and cement mix bed if necessary.12. Fill around the pool with dry sand and cement mix in 200mm layers, compacting with a fine and limited

water spraying. At the same time start filling the pool to the height of each dry sand and cement mix layer plus 100mm.

13. When dry sand and cement mix fill is complete, leave surrounding ground uncovered for 2/3 months so as to allow for any possible settlement before attempting to pave or finish off.

14. At all times, before emptying the pool, it is essential that you contact Coralcovepools

◄ — 600 — ► ◄ — 1300 — ►

4000

The 100mm compact dry sand & cement mix bed must be level width ways and not more than 100mm

1680 downdry sand & cement mix base

1680 down to dry sand & cement mix base

1040 down to dry sand & cement mix base

1040 down to dry sand & cement mix base

Shallow End

1680

3150

600 1300

Outside Peg COutside Peg A

Outside Peg B

4 outside pegs establish the finished height of the pool.

1040

Establish 4 corner pegs

SECTION THROUGH EXCAVATION

DatumLine is the top of the edge beam on the pool

Do not over dig the excavation. If you do make sure the extra depth is taken up with crushed rock or other suitable hard fill and compact thoroughly.

LAYOUT OF EXCAVATION

5900

Corner Peg

Corner Peg

Please Note

These dimensions are variable depending upon site design decisions detail ‘A’ is typical only. The Datum is constant.

Carefully read and comply with installation instructions

Points A & B

IMPORTANT: make sure all pegs are left in place so the excavation can be easily checked by Coralcovepools.

Outside Peg D

Provide pegs either side of the pool in positions indicated on the layout. String a line from one to the other as shown, and position a peg to depth required at points A, B, C & D making sure they are level with the first one that you put in across length and depth. The first peg you put in indicates the finished height that you want your pool to be at (i.e. may be level with your damp course on the house wall or a point somewhere else.

Deep End

Corner Peg

Manufacturers in fibreglass Products & Swimming Pools for over 30 years