Copyright: Valiant Communications Limited - 2010Slide 1 1 x E1/T1 over Ethernet Multiplexer (TDMoIP)...
-
Upload
wendy-newton -
Category
Documents
-
view
225 -
download
0
Transcript of Copyright: Valiant Communications Limited - 2010Slide 1 1 x E1/T1 over Ethernet Multiplexer (TDMoIP)...
Copyright: Valiant Communications Limited - 2010 Slide 1
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
1 x E1/T1 over Ethernet1 x E1/T1 over EthernetMultiplexer (TDMoIP)Multiplexer (TDMoIP)
Product PresentationProduct Presentation
Updated: 29 April, 2010
VValiant aliant CCommunications ommunications LLimitedimitedTelecom Transmission Solutions
Copyright: Valiant Communications Limited - 2010 Slide 2
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Product Overview VCL-1 x E1/T1 over Ethernet (TDMoIP) provides the user with E1/T1 over
Ethernet (IP) conversion and allows the user to transport E1/T1 channels
(carrying data or voice) over Ethernet (IP) Network
Very Compact and low cost
It is an E1/T1 extension device which utilizes the Ethernet / IP Network to
transport E1 or a T1 signal in real-time
Useful for the Real-time applications carrying VOICE, VIDEO and DATA
Compatible with 2 port, 8 port and 16 port TDMoIP versions
The equipment can be installed and used in a point-to-point topology
Multiple units can be used in different (Remote) sites in point-to-multipoint
topology by using 2, 8 and 16 port TDMoIP equipment in central sites.
Copyright: Valiant Communications Limited - 2010 Slide 3
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Product Overview The QoS features include short and stable transmission delay, low jitter /
wander.
Suitable for achieving higher bandwidth utilization
Converts the E1/T1 frame format into Ethernet Data for transmission over the
Ethernet or IP Network and then re-converts the Ethernet data back into
E1/T1 frame format at the far-end terminal, to inter-connect two or more
E1/T1 devices over the Ethernet / IP Network
Optional 110-220V AC (110~240V AC) and -48V DC (18~72V DC) input
power supply.
Copyright: Valiant Communications Limited - 2010 Slide 4
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
How it works The equipment is a TDM / Packet processing unit.
It converts E1/T1 data stream into Ethernet packets with or without IP
headers.
These packets are transported over the Ethernet network.
At the far-end, the packets from the uplink Ethernet port are sorted and
processed to re-assemble into the original E1 or T1 data stream.
It also uses algorithms to recover the E1 or T1 clock synchronization and to
ensure that the reconstructed clock will meet the stringent requirement of
TDM applications.
Copyright: Valiant Communications Limited - 2010 Slide 5
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Supports user selectable one E1 or T1 port
Easy to use and configure by any web browser
E1/T1 signal is a TDM signal which transmits information in a constant bit rate
of E1@ 2048Kbps, T1@ 1544Kbps.
Support point-to-point link establishment over IP Network
Support point-to-multipoint link establishment over IP Network with 2, 8 and 16
port TDMoIP equipment
Stable E1/T1 clock recovery, low jitter / wander
Low processing delay for E1/T1 channel, high bandwidth usage efficiency
Resistance to packet loss, with PCM frame synchronization protection
Adequate jitter buffer to resist packet delay variation
Auto parallel or cross cable adaptive Ethernet ports. Allow easy connection to
other Ethernet equipment.
Features and Highlights
Copyright: Valiant Communications Limited - 2010 Slide 6
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Local and remote E1/T1 LOS and AIS and packet loss indication for trouble-
shooting and maintenance
Support 1+1 backup uplink ports
Supports Automatic Ethernet negotiation function and configurable 10M/100M,
Half / Full duplex working modes
Optional powers 110-220V AC and -48V DC. May be ordered with either power
supply option
Idle for connecting offshore sites with central site over Ethernet / IP network
with very low investment costs
Supports transparent passing of VLAN tagged Ethernet DATA
Works well with other TDMoIP equipment having multiple E1/T1 ports
Robust and cost effective.
Features and Highlights
Copyright: Valiant Communications Limited - 2010 Slide 7
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
The equipment may be used for the following purposes:
Connecting point-to-point E1/T1 devices over Ethernet or IP network
Establishing point-to-point E1/T1 link over wireless bridge (Ethernet
Radios)
Connecting point-to-multipoint E1/T1 devices over Ethernet or IP network
with 2, 8 and 16 port TDMoIP version
Establishing point-to-multipoint E1/T1 link over wireless bridge (Ethernet
Radios) with 2, 8 and 16 port TDMoIP version.
Application
Copyright: Valiant Communications Limited - 2010 Slide 8
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
E1/T1 PBX
IP Networks
PCM
E1/T1 PBX
PCM
Radio Link
Uplink E1/T1UplinkE1/T1
Uplink E1/T1UplinkE1/T1
Application Diagram
Point to point applications
Note: When connecting to a wireless LAN bridge (Ethernet Radio), care must be taken to
protect the equipment from lightening strikes and surges by installing surge protection
devices with a good earth / ground connection. Poor earth / ground connections may
also degrade the operation of the Ethernet port, causing severe packet losses.
1 Port TDMoIP
1 Port TDMoIP
1 Port TDMoIP
1 Port TDMoIP
Copyright: Valiant Communications Limited - 2010 Slide 9
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
E1 / T1Multiplexer
E1/T1 PBX E1 / T1Multiplexer
E1/T1 PBX E1 / T1Multiplexer
8/16 Port TDMoIP
Central Site
E1 / T1Multiplexer
E1/T1 PBX
Remote Site - 5
E1 / T1
E1/T1 PBX
Remote Site - 3
E1 / T1
E1 / T1Multiplexer
Remote Site - 2
E1 / T1
E1 / T1Multiplexer
Remote Site - 1
Application Diagram
Point to multi-point application# 1
E1 / T1
Cell Tower
Remote Site - 4
IP Network
Uplink
Uplinks Uplinks
2 Port TDMoIP1 Port TDMoIP
1 Port TDMoIP1 Port TDMoIP1 Port TDMoIP
Copyright: Valiant Communications Limited - 2010 Slide 10
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
E1 / T1
E1/T1 PBX
Remote Site - 3
E1 / T1
E1 / T1Multiplexer
Remote Site - 2
E1 / T1
E1 / T1Multiplexer
Remote Site - 1
E1 / T1Multiplexer
E1/T1 PBX E1 / T1Multiplexer
E1/T1 PBX E1 / T1Multiplexer
8/16 Port TDMoIP
Central Site
Radio Link
Radio Link
Radio Link
E1 / T1
Cell Tower
Remote Site - 4
E1 / T1Multiplexer
E1/T1 PBX
Remote Site - 5
Application Diagram
Point to multi-point application# 2
IP Network
Uplinks
Uplinks
Uplink
1 Port TDMoIP
1 Port TDMoIP
1 Port TDMoIP
1 Port TDMoIP 2 Port TDMoIP
Copyright: Valiant Communications Limited - 2010 Slide 11
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Front Panel View
TDMoIP with -48V DC input power supply
TDMoIP with 110-220V (110V~240V) AC power supply
Copyright: Valiant Communications Limited - 2010 Slide 12
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Bottom Panel View
Configuration DIP Switches
Copyright: Valiant Communications Limited - 2010 Slide 13
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Monitoring and Managing the equipment through the Web Management using
Web Browser (Internet Explorer, Fire Fox etc)
Web Management (Through Web Browser)
Copyright: Valiant Communications Limited - 2010 Slide 14
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Monitoring and Managing the equipment through the Web Management using
Web Browser (Internet Explorer, Fire Fox etc)
Web Management (Through Web Browser)
Copyright: Valiant Communications Limited - 2010 Slide 15
1 x E1/T1 over Ethernet Multiplexer (TDMoIP)
Thank you for your attentionThank you for your attention
For more details visit us at our Website at
http://www.valiantcom.com
U.K.
Valiant Communications (UK) Ltd1, Acton Hill Mews,310-328 Uxbridge Road,London W3 9QN, United KingdomE-mail: [email protected]: http://www.valiantcom.com
U.S.A.
Valcomm Technologies Inc.4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America E-mail: [email protected]: http://www.valiantcom.com
INDIA
Valiant Communications Limited71/1, Shivaji Marg,New Delhi - 110015,IndiaE-mail: [email protected]: http://www.valiantcom.com