Copyright, Valiant Communications Limited 2000-2005 Valiants Remote Alarm Reporting and Site...

Copyright, Valiant Communications Limited 2000-2005

Valiant’s Remote AlarmValiant’s Remote AlarmReporting and SiteReporting and Site

Monitoring EquipmentMonitoring Equipment

Confidential

Slide 1

VValiant aliant CCommunications ommunications LLimitedimitedTelecom Transmission Solutions

Updated : January, 2005

U.K.

Valiant Communications (UK) Ltd1, Acton Hill Mews,310-328 Uxbridge Road,London W3 9QN, United KingdomE-mail: [email protected]: http://www.valiantcom.com

INDIA

Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, IndiaPhone: +91-11 4105 5601, 91-11 4105 5602 Fax: +91-11 4105 5604, 91-11 2543 4300E-mail: [email protected]: http://www.valiantcom.com

U.S.A.

Valcomm Technologies Inc.4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America E-mail: [email protected]: http://www.valiantcom.com


Remote Alarm Remote Alarm SuiteSuite

Confidential

Slide 2

Remote Alarm Reporting, Site Monitoring and Management Remote Alarm Reporting, Site Monitoring and Management

Equipment SuiteEquipment Suite offer three types of solutionsoffer three types of solutions

Product OverviewProduct Overview

Remote Alarm Reporting - Solution # 1Remote Alarm Reporting - Solution # 1

Remote Site Monitoring - Solution # 2Remote Site Monitoring - Solution # 2

Line Testing - Solution # 3Line Testing - Solution # 3


Used to configure, monitor, control and manage

remote sites from a central monitoring location over

• Dedicated serial data (RS232) links,

• Over the Internet (TCP/IP protocol).

Remote Alarm Reporting, Site Monitoring and Remote Alarm Reporting, Site Monitoring and

Management Equipment SuiteManagement Equipment Suite - An Overview- An Overview


Confidential

Slide 3


Remote Site Alarm Input TerminalRemote Site Alarm Input Terminal

• Access, manage and control Remote Site Alarms

• Alarms Reporting.

• Manage through PC using a Window based GUI

• Can be accessed, managed and controlled from a Central Site over :

a) Serial RS232 Data Link

b) The Internet (using TCP/IP Protocol)

Central Site Alarm Recording EquipmentCentral Site Alarm Recording Equipment

• Store and (continuously) log ALL Alarms that, may appear at the Remote

Sites during any given 7 days & 24 hour time period.

• Can configure the Remote Site equipment using a Windows based GUI

Confidential

Slide 4



Uses and ApplicationsUses and Applications

• SCADA applications power distribution lines, oil pipe lines,

gas pipelines and water pipe lines.

• Monitoring and Managing Remote (unmanned) Cellular Sites.

• Managing and Monitoring Remote Radio Relay (unmanned) Sites.

• Managing and Monitoring Remote DLC or RSU (unmanned)

telecom sites.

• Security and Surveillance.

Confidential

Slide 5



Remote Alarm Reporting, Site Monitoring and Management Remote Alarm Reporting, Site Monitoring and Management Equipment Suite offers the following alarms and functionsEquipment Suite offers the following alarms and functions

• Remote Site Alarms

Confidential

Slide 6

• Equipment Alarm(s) Relay Open / Relay Close (User Configurable) Up to 32 Alarm Inputs per Site / Location.

• Intruder Alarm

• Fire Alarm

• Smoke Alarm

• Flooding Alarm.

• AC Mains Power Failure Alarm, etc.



• Remote Site Monitoring Facility

To Monitor following parameters

• Remote Site Temperature

• AC Mains Voltage at the Remote Site

• DC Battery Voltage of the battery-bank of the power backup

equipment (12VDC and 48VDC).

• Remote Site Control Facility

Management of the power back-up battery banks

• Read voltage remotely

• Set threshold limit to shut-down / switch over to another

source - AC main or Solar

Confidential

Slide 7



• Temperature Monitoring and Management facility

Confidential

Slide 8

• “Monitor and Read” temperature of each remote sites

• Site environmental management


• automatically "switch-on" or "switch-off" vent fans /

heaters / air conditioners at the high / low temperature

thresholds set by the User.

• Providing a power "Re-Set” to any equipment - remotely

• Initiate and provide a Power-Set (turn-off / turn-on) to any

equipment installed at the Remote Site from a Central

Monitoring location.


• Remote line / cable pair testing - Telecom application

• Perform the line testing of the remote cable pairs

• Test the line for Open, Short, Leakage and the presence of "foreign" AC potential on the cable pairs.

• Ideal for Telco deployment at hard-to-reach unmanned Remote Sites

• Helps to isolate the faulty cable pair before making a service call

Confidential

Slide 9



Confidential

Slide 10

Remote Site Terminal: Remote Site Terminal:

• Connect up to 32 Relay Inputs

• Powered by -48 VDC input (AC main optional)

• “Relay Open” or “Relay Close” condition to generate an “Alarm” - User Configurable

• Used to monitor, control and manage remote sites from a central monitoring location over

a) Dedicated Serial data (RS232) links

b) Over the Internet (TCP/IP protocol).

Solution # 1:Solution # 1:


Remote Alarm Reporting EquipmentRemote Alarm Reporting Equipment


Central Site EquipmentCentral Site Equipment

• Report and recognize upto 32 Alarm Inputs at each Remote Site

• Store and (continuously) log ALL Alarms that, may appear

at the Remote Sites during any given 7 days & 24 hour

time period.

• Configure using a Window based GUI

• Display the status of all the Active Alarm on LCD display

• Can be connected upto 8 Remote Sites


Confidential

Slide 11



Dedicated serial data (RS-232) links

(Example: using dedicated serial data (RS-232) links )

Confidential

Slide 12

1 to 32 Relays

1 to 32 Relays

1 to 32 Relays

1 to 32 Relays 1 to 32 Relays

1 to 32 Relays

1 to 32 Relays

1 to 32 Relays

VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

Dedicated Serial (Asynchronous, RS 232)

Links

VCL-MonitoringSystem

Site 1

Site 2

Site 3

Site 4

Site 5

Site 6

Site 7

Site 8




Confidential

Slide 13

Central Office


VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

HUB HUB

HUB HUB

Remote Network(s)3 through 6

Ne

two

rke

d(T

CP

/IP

Pro

toco

l)N

etw

orke

d(T

CP

/IP P

roto

col)

INTERNETINTERNET

TCP/IP Protocol Networked (Internet) Links

10 BaseT Ethernet

Remote Network / Site 1

Remote Network / Site 2 Remote Network / Site 7


(Example : using TCP/IP protocol networked (Internet) Links)


Networked(TCP/IP Protocol)

32 Relay Inputs 32 Relay Inputs




VCL-Remote Device

Mixed network of dedicated serial (RS-232)Data links and network (TCP/IP) protocol links

Central Office


Dedicated Serial

(Asynchronous, RS 232) Links

Remote Site 8

32 Relay Inputs

32 Relay Inputs32 Relay Inputs

32 Relay Inputs

Remote Site(s) 6 through 7Remote Network / Site 2


VCL-Remote Device

VCL-Remote DeviceVCL-Remote

Device

HUB

HUB

INTERNETINTERNET


10 BaseT Ethernet

(Example: Using a "mixed" network of dedicated serial (RS-232) Data links and network (TCP/IP) protocol links)

Remote Site 5

Confidential

Slide 14





RJ-45 for connection withdedicated serial data (RS-232)links or networked TCP-IP links

DB-9 for connectionwith PC

Central site - Alarm Monitoring Equipment (Back View)

- 48 V5V

“Scroll” LCD Display

ACKRemoteSite #

AlarmSite #

System # (Remote #)Alarm #

Text of Alarm(Configured by the user)

Central site - Alarm Monitoring Equipment (Front View)

Alarm AcknowledgeSwitch

Confidential

Slide 15



Central Site Alarm Recording Equipment : Specifications Central Site Alarm Recording Equipment : Specifications

Confidential

Slide 16

Specifications of RS 232 @ 9.6Kbps, Asynchronous Data Interface Port for

Serial (Point to Point) Connection : to connect upto 8 remote sites to the

central monitoring site on point to point serial data links.

Number of Remote Site (Remote Terminals)That can be Connected to central siteMonitoring Equipment 8 (Remote Terminals)

Type RS 232Tx, Rx, Gnd

Mode Asynchronous

Baud Rate 9.6 kbps - Fixed

Data Size 8bits

Parity None

Flow Control None ( Xon / Xoff )

Stop Bit 1




Ethernet Specifications @ 10 BaseT Data Interface Port for Networked

(IP/Internet) Connection : to connect upto 8 remote sites to the central

monitoring site over networked (IP/Internet) links.

Number of Remote Site (Remote Terminals)That can be Connected to central siteMonitoring Equipment 8 (Remote Terminals)

Conformity IEEE 802.3.

Type 4 Wire,Twisted Pair Cabling. (Categories 3, 4 or 5).

Distance limit 100 metres (Approx. 328 feet)per Segment.

Bit Rate 10 Mbps.

Power:-48VDC (AC Input Optional)

Dimensions:2U High19-inch Shelf (19-inch rack mounting).

Confidential

Slide 17




Specifications of RS 232 @ 9.6Kbps, Asynchronous Data Interface Port for Serial (Point to Point) Connection : to connect upto 8 remote sites to the central monitoring site on point to point serial data links.

Number of Relay Inputs (User Configurable - Relay Open Relay Close Alarm Inputs)Per Remote Site Terminal 32

Connection between Remote Site Terminaland Central Site Terminal

Serial Data Interfaces 1


Mode Asynchronous


Data Size 8bits

Parity None


Stop Bit 1.

Confidential

Slide 18




Ethernet Specifications @ 10 BaseT Data Interface Port for Networked (IP / Internet) Connection : to connect upto 8 remote sites to the central monitoring site over networked (IP/Internet) links.

Connection between remote site terminaland central site terminal

Ethernet Interfaces 1


Type 4 Wire, Twisted Pair Cabling. (Categories 3, 4 or 5).

Distance limit 100 metres (Approx 328 feet) per Segment.

Bit Rate 10Mbps

Confidential

Slide 19

Power:-48VDC (AC Input Optional)

Dimensions:1U High19-inch Shelf (19-inch rack mounting).





Confidential

Slide 20

Remote site - Alarm Input Terminal

32 Relay Inputs ("Relay Open", or

"Relay Close" condition to generate an "Alarm" -User Configurable).

DB-9 for connection withdedicated serial data (RS-232)

links

RJ-45 for connectionwith ethernet



Solution # 2Solution # 2

• Remote Site Management & Monitoring can be connected to Central Site through

a) Dedicated Serial (RS232) data link

b) Internet TCP/IP Protocol

• Any number of Remote Site Monitoring equipment may be

installed and managed from Central Site.

• All Remote Site Monitoring, Management and Control function are accomplished through a PC using a Window based GUI.

Remote Site Monitoring EquipmentRemote Site Monitoring Equipment



Confidential

Slide 21


Confidential

Slide 22

Provide the following Alarms:

• Intruder Alarm

• Fire Alarm

• Smoke Alarm

• Flooding Alarm.

• Equipment Alarm(s) Relay Open / Relay Close (User Configurable) Upto 5 Alarm Inputs per Site / Location.

Control and Manage the following functionsControl and Manage the following functions

• AC Mains Power Failure Alarm.

• And to select the “switch” to the selected back-up power source.

• “Read" and "Control" Remote Site Temperature

• Temperature monitoring and management facility




Confidential

Slide 23

• "Read" AC Mains Voltage at the Remote Site.

• “Read" DC Battery Voltage of the battery-bank of the power back-up equipment (12VDC and 48VDC) and "Manage" "battery-banks.

• Remotely read the voltage of power and back-up battery

• Set the threshold limit to shut down or to switch over to

another battery line “remotely”

• Useful in case where there is two power back-up units for

added protection

• To initiate a Power "Re-Set" of the connected Equipment.

• To provide a power reset to any equipment - remotely




Confidential

Slide 24

Dedicated Serial (Asynchronous, RS 232)

Links

Central Office

VCL-Remote Device

1 to 32 Relays

(Example: using dedicated serial data (RS-232) links )

Dedicated serial data (RS-232) links


Site 8



VCL-Remote Device

32 Relay Inputs32 Relay Inputs


VCL-Remote Device

VCL-Remote Device

VCL-Remote Device

HUB

HUB

HUB

HUB

Ne

two

rke

d(T

CP

/IP

Pro

toco

l)N

etw

orke

d(T

CP

/IP P

roto

col)

INTERNETINTERNET


10 BaseT Ethernet

TCP/IP protocol networked (Internet) LinksCentral Office





(Example : using TCP/IP protocol networked (Internet) Links)

Confidential

Slide 25




VCL-Remote Device

HUB

10 BaseT Ethernet


VCL-Remote Device

VCL-Remote Device

HUB

INTERNETINTERNET


COM 2COM 1Dedicated Serial

(Asynchronous, RS 232)Links

Central Office

32 Relay Inputs

32 Relay Inputs

32 Relay Inputs

Remote Site 8Remote Network / Site 1


Mixed network of dedicated serial (RS-232) Data links and network (TCP/IP) protocol links

(Example: Using a "mixed" network of dedicated serial (RS-232) Data links and network (TCP/IP) protocol links)

Confidential

Slide 26



Specifications of RS 232 @ 9.6Kbps, Asynchronous Data Interface Port for Serial (Point to Point) Connection : to connect upto 8 remote sites to the central monitoring site on point to point serial data links.

Number of relay inputs (user configurable - relay open relay close alarm inputs)Per Remote Site Terminal 32

Connection between Remote Site Terminaland Central Site Terminal

Serial Data Interfaces 1


Mode Asynchronous


Data Size 8bits

Parity None


Stop Bit 1

Confidential

Slide 27




Ethernet Specifications @ 10 BaseT Data Interface Port for Networked (IP/Internet) Connection : to connect upto 8 remote sites to the central monitoring site over networked (IP/Internet) links.

Connection between remote site terminaland central site terminal

Ethernet Interfaces 1.


Type 4 Wire, Twisted Pair Cabling. (Categories 3, 4 or 5).

Distance limit 100 metres (Approx 328 feet) per Segment.

Bit Rate 10 Mbps.


Confidential

Slide 28




Line Testing EquipmentLine Testing Equipment

Solution # 3Solution # 3

• Remote line / cable pair testing - Telecom application

• Perform the line testing of the remote cable pairs

• Test the line for Open, Short, Leakage and the presence of "foreign" AC potential on the cable pairs.

• Ideal for Telco deployment at hard-to-reach unmanned Remote Sites

• Helps to isolate the faulty cable pair before making a service call

Confidential

Slide 29


VCL VCL ProductsProducts

E1, Voice & Data Drop-Insert Multiplexer

PRI ISDN (Q.931) Multiplexers

E1 Intelligent Channel Banks

E1 / T1 DCME (Digital Circuit Multiplication Equipment) - Voice Compression Equipment

Thin Route DCME

E1 / T1 Echo Cancellers

E1 / T1 Digital Cross Connect

T1 / E1 Converters

E3, 34Mbps Multiplexer

34Mbps Optical Line Transmission Equipment (OLTE)

Digital Loop Carrier

Remote Asset Management Systems

STM 1 / STM 4 - SDH Equipment

Confidential

Slide 30


Thank you for your attentionThank you for your attention

For more details visit us at our Website at

http://www.valiantcom.com

U.K.

Valiant Communications (UK) Ltd1, Acton Hill Mews,310-328 Uxbridge Road,London W3 9QN, United KingdomE-mail: [email protected]: http://www.valiantcom.com

INDIA

Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, IndiaPhone: +91-11 4105 5601, 91-11 4105 5602 Fax: +91-11 4105 5604, 91-11 2543 4300E-mail: [email protected]: http://www.valiantcom.com

U.S.A.

Valcomm Technologies Inc.4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America E-mail: [email protected]: http://www.valiantcom.com

Copyright, Valiant Communications Limited 2000-2005 Valiants Remote Alarm Reporting and Site...

Documents

Transcript of Copyright, Valiant Communications Limited 2000-2005 Valiants Remote Alarm Reporting and Site...