Coppha Leo
5
Coppha leo Product name: Climbing Formwork Tue, 21 Apr 2015 Product Information Item No. CF-DXB-180&240 Size: Weight: Description: The climbing formwork DXB-180&240 are mainly used in concrete pouring of dam, pier, guy anchor, concrete protecting wall, tunnel, and underground workshop, etc. Destail: Introduction The cantilever climbing formwork PJ200 & PJ240 are widely used in concrete pouring of piers, high-rise buildings, and a variety of other structures.
description
gds
Transcript of Coppha Leo
Coppha leoProduct name: Climbing Formwork Tue, 21 Apr 2015
Product Information
Item No. CF-DXB-180&240
Size:
Weight:
Description:The climbing formwork DXB-180&240 are mainly used in concrete pouring of dam, pier, guy anchor, concrete protecting wall, tunnel, and underground workshop, etc.
Destail:
Introduction
The cantilever climbing formwork PJ200 & PJ240 are widely used in concrete pouring of piers, high-rise buildings, and a variety ofotherstructures.
The concrete lateral pressure is entirely supported by anchor system and the wall-through tie-rods. Therefore, additional reinforcement is not needed. The construction is easy, rapid and economical, and the surface of the concrete is slick.
The biggest advantage of PJ series is light in weight and convenient in use. The operation platform width of PJ200andPJ240is 200cmand 240cm respectively.
The Characteristics
The formwork unitcan move backwards up to 600mm.The formwork is flexible to adjust from all directions.The inclination can be adjusted by pull-push prop andisup to 18.Reasonable structure and light weight.High level of universality and standardization for connection components.Structure Sketch PJ200PJ240
The Concrete Pouring ProcessThe first pouringBefore pouring, fix the anchor system on the plywood by M30position bolt or construction bolt. Reinforce the formwork bywall- through tie rods.
Anchor system fixed on the plywood
The second pouring(the first lift)Climbing brackets are used in the second pouring. Fix the anchor shoe in the bowl-climbing cone by tensile bolt, hang the bracket on the anchor shoe, and then insert the safe pin. ?
