Copia de Yamazumi Process Modeling Tool AdaptiveBMS
9
Yamazumi Process Modeling Tool provided by www.AdaptiveBMS.com Issue 2.01 Prepared By: Chris Coles Department: Adaptive BMS Date: 3/1/2005 Process Name: Build Process Process Type: Product Measurement Method: Video Time Unit secs Process Step/Station Process Step/Station Process Step/Station Process Step/Station Process Step/Station Process Step/Station Task Work Type Setup Parts Produce Parts Mount Wheels Gear Assembly <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> <fill in> Warm pressing machine Waste - Warm pressing machine Waste 5.00 Clean press tool NVA - Clean press tool NVA 10.00 Setup next pressings NVA - Setup next pressings NVA 5.00 Align rivnuts NVA - Align rivnuts NVA 9.00 Align studs NVA - Align studs NVA 9.00 Load plate VA - Load plate VA 10.00 Activate press VA - Activate press VA 6.00 Deactivate press NVA - Deactivate press NVA 9.00 Remove 2 pressed parts NVA - Remove 2 pressed parts NVA 10.00 Clean up tool Waste - Clean up tool Waste 7.00 Buff covers top VA - Buff covers top VA 8.00 Buff cover bottom VA - Buff cover bottom VA 9.00 Pick next part NVA - Pick next part NVA 9.00 Buff covers top VA - Buff covers top VA 5.00 Buff covers bottom VA - Buff covers bottom VA 7.00 Pick Next NVA - Pick Next NVA 8.00 Buff covers top VA - Buff covers top VA 9.00 Buff covers bottom VA - Buff covers bottom VA 10.00 cover and Pick Next NVA - cover and Pick Next NVA 8.00 Replenish stock material NVA - Replenish stock material NVA 10.00 Pick screws and position NVA - Pick screws and position NVA 5.00 Secure 4 Screws VA - Secure 4 Screws VA 7.00 Pick Casing NVA - Pick Casing NVA 7.00 Position Wheel and Secure VA - Position Wheel and Secure VA 9.00 Next Wheel and Secure VA - Next Wheel and Secure VA 6.00 Arrange Small Stack Waste - Arrange Small Stack Waste 10.00 Apply First label VA - Apply First label VA 7.00 Apply Second label VA - Apply Second label VA 6.00 Apply Final label VA - Apply Final label VA 7.00 Attach belt VA - Attach belt VA 5.00 Mount Bracket VA - Mount Bracket VA 5.00 Secure Bracket VA - Secure Bracket VA 10.00 Inspect First shaft assy Waste 7.00 Inspect second shaft assy Waste 9.00 Pick gear and assemble NVA - Pick gear and assemble NVA 10.00 Pick fitting and Secure VA - Pick fitting and Secure VA 7.00 Assemble Spacer VA - Assemble Spacer VA 10.00 Pick second fitting and Secure VA 6.00 Inspect and cover Waste - Inspect and cover Waste 5.00 Assemble shaft assy VA - Assemble shaft assy VA 7.00 Assemble flipper unit VA - Assemble flipper unit VA 5.00 Cover with protective wrap VA 6.00 51 <Select> - 51 <Select> 52 <Select> - 52 <Select> 53 <Select> - 53 <Select> 54 <Select> - 54 <Select> 55 <Select> - 55 <Select> 56 <Select> - 56 <Select> 57 <Select> - 57 <Select> 58 <Select> - 58 <Select> 59 <Select> - 59 <Select> 60 <Select> - 60 <Select> 61 <Select> - 61 <Select> 62 <Select> - 62 <Select> 63 <Select> - 63 <Select> 64 <Select> - 64 <Select> 65 <Select> - 65 <Select> 66 <Select> - 66 <Select> 67 <Select> - 67 <Select> 68 <Select> - 68 <Select> Yamazumi Process Modeling Tool Buff Three Parts Attach Bracket Shaft Assembly Waste - Inspect First shaft assy Waste - Inspect second shaft assy VA - Pick second fitting and Secure VA - Cover with protective wrap Click here to see Charts
Setup next pressings NVA - Setup next pressings NVA 5.00Align rivnuts NVA - Align rivnuts NVA 9.00Align studs NVA - Align studs NVA 9.00Load plate VA - Load plate VA 10.00
Activate press VA - Activate press VA 6.00Deactivate press NVA - Deactivate press NVA 9.00
Remove 2 pressed parts NVA - Remove 2 pressed parts NVA 10.00Clean up tool Waste - Clean up tool Waste 7.00
Buff covers top VA - Buff covers top VA 8.00Buff cover bottom VA - Buff cover bottom VA 9.00
Pick next part NVA - Pick next part NVA 9.00Buff covers top VA - Buff covers top VA 5.00
Buff covers bottom VA - Buff covers bottom VA 7.00Pick Next NVA - Pick Next NVA 8.00
Buff covers top VA - Buff covers top VA 9.00Buff covers bottom VA - Buff covers bottom VA 10.00cover and Pick Next NVA - cover and Pick Next NVA 8.00
Replenish stock material NVA - Replenish stock material NVA 10.00Pick screws and position NVA - Pick screws and position NVA 5.00
Secure 4 Screws VA - Secure 4 Screws VA 7.00Pick Casing NVA - Pick Casing NVA 7.00
Position Wheel and Secure VA - Position Wheel and Secure VA 9.00Next Wheel and Secure VA - Next Wheel and Secure VA 6.00
Arrange Small Stack Waste - Arrange Small Stack Waste 10.00Apply First label VA - Apply First label VA 7.00
Apply Second label VA - Apply Second label VA 6.00Apply Final label VA - Apply Final label VA 7.00
Attach belt VA - Attach belt VA 5.00Mount Bracket VA - Mount Bracket VA 5.00Secure Bracket VA - Secure Bracket VA 10.00
Inspect First shaft assy Waste - Inspect First shaft assy Waste 7.00Inspect second shaft assy Waste - Inspect second shaft assy Waste 9.00Pick gear and assemble NVA - Pick gear and assemble NVA 10.00Pick fitting and Secure VA - Pick fitting and Secure VA 7.00
Assemble Spacer VA - Assemble Spacer VA 10.00Pick second fitting and Secure VA - Pick second fitting and Secure VA 6.00
Inspect and cover Waste - Inspect and cover Waste 5.00Assemble shaft assy VA - Assemble shaft assy VA 7.00Assemble flipper unit VA - Assemble flipper unit VA 5.00
Terms of UseCopyright (C) 2011 Adaptive Business Management Systems Ltd. All rights reserved.
Limited Use Policy
No Warranties
Limitation of Liability
Some states do not allow the limitation or exclusion of liability for incidental or consequential damages,so the above limitation may not apply to you.
This 'TermsOfUse' worksheet may not be modified, removed, or deleted.
You may make archival copies and customize this template (the "Software") for personal use or for your company use. The customized template (with your specific personal or company information) may be used and shared within your company, but this template or any document including or derived from this template may NOT be sold, distributed, or placed on a public server such as the internet.
THE SOFTWARE AND ANY RELATED DOCUMENTATION ARE PROVIDED TO YOU "AS IS."Adaptive Business Management Systems MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND EXPRESSLY DISCLAIMS ALLREPRESENTATIONS, ORAL OR WRITTEN, TERMS, CONDITIONS, AND WARRANTIES, INCLUDING BUT NOTLIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ANDNONINFRINGEMENT. WITHOUT LIMITING THE ABOVE YOU ACCEPT THAT THE SOFTWARE MAY NOT MEETYOUR REQUIREMENTS, OPERATE ERROR FREE, OR IDENTIFY ANY OR ALL ERRORS OR PROBLEMS, OR DOSO ACCURATELY. This Agreement does not affect any statutory rights you may have as a consumer.
IN NO EVENT SHALL Adaptive Business Management Systems BE LIABLE TO YOU, FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS,LOST SAVINGS, OR ANY OTHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGESARISING FROM THE USE OR THE INABILITY TO USE THE SOFTWARE (EVEN IF WE OR AN AUTHORIZED DEALEROR DISTRIBUTOR HAS BEEN ADVISED OF THE POSSIBILITY OF THESE DAMAGES), OR ANY MISTAKES ANDNEGLIGENCE IN DEVELOPING THIS SOFTWARE, OR FOR ANY CLAIM BY ANY OTHER PARTY. THE ORGANIZATION, BUSINESS, OR PERSON USING THIS SOFTWARE BEARS ALL RISKS AND RESPONSIBILITY FOR THE QUALITY AND PERFORMANCE OF THIS SOFTWARE.
Please try to visit our advertisers to help keep this service running
UpdatesUpdates More ToolsMore Tools HomeHome
Some states do not allow the limitation or exclusion of liability for incidental or consequential damages,so the above limitation may not apply to you.
Please try to visit our advertisers to help keep this service running