´

Copertina vedere l’altro pdf foglio formato A3

2

3

AF Systems is the Italian leading company in the passive fire protection field.

AF Systems technologies protect against the spread of fire by sealing service installation penetrations.

An efficient compartmentalization confines fire into small areas for a certain amount of time (120 or 180 minutes), thus ensuring the continuity of operations, reducing property damages and providing a valuable time for the evacuation of the occupants.

All products are endowed with international certifications and comply with current European EN standards.

In addition to its range of products, AF Systems distributes intumescent paints, calcium silicate boards and other specific items.

AF Systems Technical Service remains at your complete disposal. For any doubts you may have please send an e-mail to estero@afsystems.it

AF Systems is certified UNI EN ISO 9001.

4

AF COLLAR Pages 6-7

Fire-rated collar for combustible pipes, insulated metal pipes and

cable penetrations

AF COLLAR C Page 8

Fire-rated element for combustible pipe

penetrations

AF MULTICOLLAR Page 9

Modular fire-rated element for combustible pipe

penetrations

AF BAGS Page 14

Fire-rated pillow for cable

penetrations

AF MASA Page 15

Fire-rated cushion for cable

penetrations

AF SLEEVES Page 10

Fire-rated wrap for combustible pipe

penetrations

Products overview (1/2)

AF SLEEVE B /AF SLEEVE B3 Page 11-12

Intumescent stripe for the protection of insulated metal pipe pene-

trations / of combustible pipes with cables inside

AF PIPEGUARD Page 13

Fire-rated mat for metal pipe

penetrations

AF JUNCTION BOX/AF E-BOX Page 16

Intumescent stripe for standard and junction boxes

AF COVER LIGHT Page 17

REI 120 protection for recessed lights in false ceilings

AF COVER AIR Page 18

REI 120 protection for air diffusers in false ceilings

AF COVER SPLIT Page 19

REI 120 protection for ventilation air conditioners

recessed in false ceilings

5

AF PANEL Pages 22-23

Fireproofing panel for the protection of openings

AF SEAL W Page 28

Fire-rated acrylic sealant for the protection of expansion joints,

pushrod holes and penetrations

AF CABLE COAT Page 27

Firestop paint for electric cables

AF FIREGUARD 3 Page 31

Fire-rated mat for ventilation ducts

AF GRAPHIT FOAM Page 30

Fireproofing foam for the protection of service installation penetrations

and empty openings

AF FOAM RM Page 29

Fireproofing foam for the protection of service

penetrations and linear joints

AF PSR 90/120 Page 21

Fire-rated mat for metal rods

Products overview (2/2)

AF JOINT Page 24

Fire-rated element for

expansion joints

AF SEISMIC JOINT Page 26

Fire-rated element for expansion joints

subject to movements

AF CORD Page 25

Fire rated element for

expansion joints

AF COVER STRING Page 20

Fire-rated element for small penetrations

in false ceilings

AF FIREGRILLE Page 32

Fire-rated grille for ventilation openings

6

Fire-rated collar for combustible pipes, insulated metal pipes and cable penetrations (1/2)

AF COLLAR

DESCRIPTION AF COLLAR is a fire-rated circular element designed to grant EI 120 / EI 180 (according to EN 1366-3) to walls/floors passed through by combustible pipes, insulated metal pipes and electric cables. AF COLLAR consist of a stainless steel case and one or more layers of highly intu-mescent material. In case of fire, due to the action of heat, the combustible pipe suffers a defor-mation and melts gradually while the intumescent part of the collar expands until the complete obstruction of the internal space; ensuring thus a perfect sealing against the passage of smoke and flames. CHARACTERISTICS Aspect: stainless steel circular element with one or more layers of intumescent material Color: silver Available sizes: diameter from 30 to 400 mm height from 30 to 200 mm Free expansion: >20:1 Activation temperature: 180°C FIELD OF APPLICATION AF COLLAR has been tested on: 1. Combustible pipes (PVC, PP, PE) 2. Combustible pipes with a maximum inclination of 45° 3. Combustible pipes containing electric cables 4. Insulated metal pipes APPLICATION METHOD 1. Open AF COLLAR and place it around the pipe on the fire exposed side 2. Close it by using its metal clip 3. Place it around the pipes/cables in adherence to the wall/floor 4. Secure AF COLLAR with metal anchors (8x60 mm) if applied on floors and

concrete walls and with self-tapping metal screws if applied on plasterboard walls

Note: AF COLLAR are also certified for wall application, only on the fire exposed side. WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes of different sizes. As long as the product is kept in a dry environment, there is no time limit for its storage.

7

*Fire-rated collar AF COLLAR C 400

SPECIFICATIONS Supply and installation of fire-rated collars AF COLLAR, consisting of circular shaped stainless steel elements and the intumescent material FIREFILL 30/50/100. AF COLLAR have been designed to grant EI 120 / EI 180 to combus-tible pipes, insulated metal pipes and cable penetrations on walls and floors. CERTIFICATIONS Class EI 180 (EN 1366-3) Lightweight concrete floor Class EI 120 (EN 1366-3) Lightweight concrete wall Class EI 120 (EN 1366-3) Plasterboard wall Class REI 120 (EN 1365-2) False ceiling ETA 16/0891

CERTIFICATIONS (Istituto Giordano) IG n° 303373/3516FR Classe EI 180 (UNI EN 1366-3) Plancher en béton

IG n° 298681/3466FR Classe EI 120 (UNI EN 1366-3) Mur en plaques de plâtre

IG n° 290216/3370FR Classe EI 180 (UNI EN 1366-3) Plancher en béton

IG n° 277384/3259FR Classe EI 120 (UNI EN 1366-3) Mur en béton cellulaire

* Certification EI 180 sur plancher en béton cellulaire.

Internal diameter H mm

EI 120 / EI 180 Number of fixing points

30 30/50 G31M / G51M 3

40 30/50 G31A / G51A 3

50 30/50 G31B / G51B 3

63 30/50 G31C / G51C 3

80 30/50 G31F / G51D 3

90 50 G51E 3

100 50 G51O 4

110 50 G51F 4

125 50/70 G51G / G71G 4

140 50/70 G51N / G71N 5

160 50/70 G51H / G71H 5

200 100 G10I 5

250 100 G10L 5

315 200 G20P 5

400* 150 G15Q 8

AF COLLAR

Fire-rated collar for combustible pipes, insulated metal pipes and cable penetrations (2/2)

8

AF COLLAR C

Fire-rated element for combustible pipe penetrations

DESCRIPTION AF COLLAR C is an innovative fire-rated C-shaped collar designed to grant EI 120 / EI 180 (according to EN 1366-3) to walls and floors passed through by com-bustible pipes that present a curved shape. AF COLLAR C consists of a stainless steel case and intumescent stripes (AF FIRE-FILL 50/70/100). In case of fire, due to the action of heat, the combustible pipe suffers a defor-mation and melts gradually while the intumescent part of the AF COLLAR C ex-pands and blocks the passage of smoke and flames. The particular “C” shape avoids the need to manufacture ad-hoc structures made of calcium silicate or gypsum slabs. CHARACTERISTICS Aspect : stainless steel “C” shaped element Color: silver Available sizes: 110, 160, 200, 250, 400 and 500 mm Free expansion: >20:1 Activation temperature: 180°C FIELD OF APPLICATION AF COLLAR C has been designed to fire protect the passages of combustible pipes presenting a curved shape (PVC, PE, PP) in walls and floors. APPLICATION METHOD 1. Place the AF COLLAR C around the pipe on the fire exposed side 2. Secure AF COLLAR C with metal anchors (8x60 mm) if applied on floors and

concrete walls. Secure it with self-tapping metal screws if applied on plaster-board walls

WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes. As long as the product is kept in a dry environment, there is no time limit for its storage. SPECIFICATIONS Supply and installation of the fire-rated collars AF COLLAR C consisting of a stain-less steel “C” shape elements containing the intumescent material Firefill 50/100. AF COLLAR C have been designed to grant EI 120 / EI 180 to walls and floors passed through by combustible pipes that present a curved shape. CERTIFICATIONS Class EI 180 (EN 1366-3) Concrete floor Class EI 180 (EN 1366-3) Aerated concrete wall Class EI 120 (EN 1366-3) Plasterboard wall ETA 16/0772

Type Internal diameter (mm)

External size (mm)

Height (mm)

AF COLLAR C 110

Up to 110

160x160 50

AF COLLAR C 160

From 110 to 160

230x230 70

AF COLLAR C 200

From 160 to 200

300x300 100

AF COLLAR C 250

From 200 to 250

350x350 150

AF COLLAR C 400

From 250 to 400

450x450 150

AF COLLAR C 500*

From 400 to 500

500x500 150

Tested applications on walls and floors

*Certified EI60 only on floors

9

DESCRIPTION AF MULTICOLLAR is a modular fire-rated collar conceived to grant EI 120 (according to EN 1366-3) to walls passed through by combustible pipes. It consists of a stainless steel linear roll and two or more layers of highly intumes-cent material. AF MULTICOLLAR can be cut to size and installed on pipes with diameter be-tween 30 and 250 mm. AF MULTICOLLAR field of application can be extended to insulated metal pipes, corrugated pipes, multilayer pipes and combustible pipes with maximum angle of 45°. When a fire occurs, the pipe suffers a deformation and melts gradually. Mean-while, the intumescent material FIREFILL 50 expands, blocking thus the passage of smoke and flames. CHARACTERISTICS Aspect: stainless steel case and intumescent stripes Color: silver Size of the metal stripe: 2500x50 mm Size of the intumescent stripe: 8600x50x4 mm Diameter: from 30 to 250 mm Free expansion: >20:1 Activation temperature: 180°C APPLICATION METHOD 1. Measure the pipe diameter and cut the stainless steel case and intumescent

stripe according to the table below 2. Wrap the intumescent stripe around the combustible pipe and secure it with

a single adhesive stripe. 3. Place the stainless steel case around the intumescent stripe by achieving an

overlap of the borders of at least 30 mm then connect it then with self-tapping screws

4. Secure the collar to the wall by using self tapping screws and to the floor by using metal expansion plugs

Note: For diameters 200 and 250 mm, two collars must be installed for each side sequentially (follow the instructions highlighted on the packaging) PACKAGING AND STRORAGE Cardboard boxes. As long as the product is kept in a dry environment, there is no time limit for its storage. SPECIFICATIONS Supply and installation of the fire-rated modular element AF MULTICOLLAR. It has been designed to grant EI 120 to plasterboard walls and EI 180 to aerated concrete floors passed through by combustible pipes (maximum diameter 250 mm). AF MULTICOLLAR is composed of a metal stripe and an intumescent stripe. CERTIFICATIONS Class EI 120 (EN 1366-3) Plasterboard wall Class EI 180 (EN 1366-3) Aerated concrete floor ETA 16/0771

AF MULTICOLLAR

Modular fire-rated element for combustible pipe penetrations

Diameter of the pipe

[mm]

Width of the metal

stripe [mm]

Width of the

intumescent stripe [mm]

N° of layers of the

intumescent stripe

N° of fire-rated collars

that it is possible to obtain

30 200 240 2 12

40 230 310 2 10

50 260 380 2 9

63 300 460 2 8

80 350 560 2 7

90 380 620 2 6

100 410 680 2 6

110 440 750 2 5

125 515 1310 3 4

140 560 1450 3 4

160 620 1640 3 4

200 2x795 2x3500 5 1

250 2x955 2X4300 5 1

10

AF SLEEVES

Fire-rated wrap for combustible pipe penetrations

DESCRIPTION AF SLEEVES are fire-rated wraps designed to grant EI 60 / EI 120 / EI 180 (according to EN 1366-3) to aerated concrete floors passed through by combus-tible pipes. AF SLEEVES contain intumescent stripes, which under the action of heating, ex-pand until the complete obstruction of the opening. When exposed to fire, the internal material of the intumescent wrap quickly increases its volume and fills the space left by the collapse of the pipes. The ex-pansion of the AF SLEEVES blocks the leaking of smoke and flames. CHARACTERISTICS Free expansion: >20:1 Activation temperature: 180 °C Generated pressure : 10 Bar Thickness: depending on the diameter Height: 50 mm APPLICATION METHOD 1. Place AF SLEEVES around the combustible pipe 2. Secure AF SLEEVES with a simple adhesive stripe and slide it into the floor 3. Complete the sealing by using concrete mortar, allowing the wrap AF

SLEEVES to get stuck inside the floor WARNING Product for professional use. Always wear gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes. As long as the product is kept in a dry environment, there is no time limit for its storage. SPECIFICATIONS Supply and installation of the intumescent wrap AF SLEEVES. It consists of the intumescent material FIREFILL 50 (measuring 50x4 mm) inserted inside prepack-aged polyethylene bags. It has been designed to grant up EI 180 to floors passed through by combustible pipes. CERTIFICATIONS Class EI 60/120/180 (EN 1366-3) Aerated concrete floor

External diameter of the pipe

Code Class EI

30 mm H010 180

40 mm H01A 180

50 mm H01B 180

63 mm H01C 180

75 mm H01N 180

80 mm H01D 180

90 mm H01E 180

100 mm H01F 180

110 mm H01G 180

125 mm H01H 120

140 mm H01I 120

160 mm H01L 120

200 mm H01M 60

Available sizes

11

AF SLEEVE B

Intumescent stripe for insulated metal pipe penetrations

DESCRIPTION AF SLEEVE B is an intumescent stripe designed to grant EI 120 / EI 180 (according to EN 1366-3) to the walls and floors passed through by insulated metal pipes (max diameter 200mm). AF SLEEVE B consists of a highly thermo-expansive material, which, under the action of a heating source, increases its volume and fills the space left by the melting of the insulating material. It can be used to seal the passage of bundles of cables and insulated metal pipes with polystyrene or polyurethane cupels both combustible and incombustible. Usage is recommended when the insulation of the metal pipes is not in class A1 with adequate degree of thermal insulation and the removal of the latter is not practicable due to problems of condensation and dripping. CHARACTERISTICS Free expansion: >20:1 Activation temperature: 180 °C Generated pressure: 10 Bar Thickness: 4 mm Height: 50 mm Length: 10000 mm FIELD OF APPLICATION The intumescent stripe AF SLEEVE B is used to protect against fire, walls and floors passed through by insulated metal pipes. APPLICATION METHOD 1. Wrap the intumescent stripe AF SLEEVE B around the insulated metal pipe

(one layer for each 20 mm thickness of the insulating material on the fire exposed side) in case of a combustible insulating material. Wrap the AF SLEEVE B on layer for up to 30mm thickness in case of an incombustible insu-lating material.

2. Secure AF SLEEVE B to the opening by using an adhesive stripe 3. Execute the perimetral sealing with a double layer of the fireproofing panel

AF PANEL and the acrylic sealant AF SEAL W WARNING Product for professional use. Always wear gloves when handling and installing the material. PACKAGING AND STORAGE Rolls of 10 m. Size 50x4mm. As long as the product is kept in a dry environment, there is no time limit for its storage. SPECIFICATIONS Supply and installation of the intumescent stripe AF SLEEVE B. This intumescent stripe has been designed to grant EI 120 / EI 180 (according to EN 1366-3) to the walls and floors passed through by insulated metal pipes. The system has been certified in combination with the semi-rigid rock-wool panels AF PANEL, treated on the surface on both sides with AF SEAL T, that measure 1000x500x50 mm and present a nominal density of 150 kg/m3. CERTIFICATIONS Class EI 180 (EN 1366-3) Concrete floor Class EI 180 (EN 1366-3) Aerated concrete wall Class EI 120 (EN 1366-3) Plasterboard wall

12

AF SLEEVE B3

Intumescent stripe for combustible pipe penetrations with cables inside

DESCRIPTION AF SLEEVE B3 is an intumescent stripe designed to grant EI 120 / EI 180 (according to EN 1366-3) to the walls and floors passed through by small com-bustible pipes with cables inside. AF SLEEVE B3 consist of a highly thermo-expansive intumescent material which, under the action of a heating source, increases its volume and fills the space left by the melting of plastic pipes. CHARACTERISTICS Free expansion: >20:1 Activation temperature: 180 °C Generated pressure: 10 Bar Thickness: 2 mm Height: 30 mm FIELD OF APPLICATION The intumescent stripe AF SLEEVE B3 is used to protect against fire the walls and floors passed through by combustible pipes with cables inside. APPLICATION METHOD In case of combustible pipe penetrations: 1. Place AF SLEEVE B3 around the plastic pipe 2. Seal the perimetral space with a double layer of the panel AF PANEL and the

acrylic sealant AF SEAL W In case of pushrod holes: 1. Enroll AF SLEEVE B3 around until reaching the diameter of the hole to be

sealed 2. Insert the obtained “roll” inside the hole to be sealed WARNING Product for professional use. Always wear gloves when handling and installing the material. PACKAGING AND STORAGE Rolls of 10 m . Section 30 x 2 mm. As long as the product is kept in a dry environment, there is no time limit for its storage. SPECIFICATIONS Supply and installation of the intumescent stripe AF SLEEVE B3. It contains the intumescent material FIREFILL 30 (measuring 30x2 mm). It has been designed to grant EI 120 / EI 180 to the walls and floors passed through by combustible pipes with cables inside. This system has been tested also in combination with the panel AF PANEL and the sealant AF SEAL W. CERTIFICATIONS Class EI 180 (EN 1366-3) Concrete floor Class EI 180 (EN 1366-3) Aerated concrete wall Class EI 120 (EN 1366-3) Plasterboard wall

13

AF PIPEGUARD

Flexible mat for uninsulated metal pipe penetrations

DESCRIPTION AF PIPEGUARD is a flexible mat designed to grant EI 120 (according to EN 1366-3) to the walls and floors passed through uninsulated metal pipes. AF PIPEGUARD has to be placed on the cold side of the wall/floor through which the pipe is passing by. The product has been designed to prevent the spread of fire from one compart-ment to another and to keep the pipe at a constant lower temperature (< 180 °C). CHARACTERISTICS Weight: 100 kg/m3 Average thickness: 7 mm +/- 10% Width: 240 mm Length: 5000 mm Non combustibility of the insulation: Class A1L APPLICATION METHOD 1. Measure the pipe diameter 2. Cut to size the needed length in order to completely cover the pipe 3. Wrap the metal pipe with AF PIPEGUARD and join the edges 4. Secure the product with a steel wire WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Rolls of 5 m in cardboard boxes. As long as the product is kept under standard storage conditions, it remains in

perfect state.

SPECIFICATIONS Supply and installation of the mat AF PIPEGUARD. It is made of mineral fiber, padded between two crystal fabrics. The outer face is aluminized and the inner face is treated with an ablative coating. AF PIPEGUARD grants EI 120 to the walls and floors passed through uninsulated metal pipes. CERTIFICATIONS Class EI 120 (EN 1366-3) Concrete floor Class EI 120 (EN 1366-3) Plasterboard wall Class EI 120 (EN 1366-3) Aerated concrete wall

14

AF BAGS

Fire-rated pillow for cable penetrations

DESCRIPTION AF BAGS are fire-rated pillows designed to grant EI 120 to walls and EI 180 (according to EN 1366-3) to floors passed through by cables placed on metal trays. They contain both intumescent and ablative compounds and are made with high quality fire resistant fiberglass covered on both sides. When exposed to heat (>180°C), the pillows AF BAGS increase their volume by about 40% and release water steam. This double action stops the leaking of smoke and flames. CHARACTERISTICS AF BAGS do not suffer damage neither from water nor from humidity. They have been proved to be mold-resistant. They are reusable, moisture resistant, and inedible by animals. FIELD OF APPLICATION AF BAGS are used to protect against fire the walls and floors passed though by cables placed on cable trays. WARNING Product for professional use. Always wear gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes. As long as the product is kept in a dry environment there is no time limit for its storage. APPLICATION METHOD 1. Measure the width of the cable tray and choose accordingly the number of

fire-rated pillows required to completely seal the opening 2. Place the pillows inside the cable tray by using the certified side of 120 mm

as the thickness of the wall, until reaching the complete obstruction of the cable tray

3. Seal the remaining space between the opening and the cable tray with the fireproofing panel AF PANEL and the fire-rated acrylic sealant AF SEAL W

SPECIFICATIONS Supply and installation of the fire-rated pillows AF BAGS. These pillows are made with a highly resistant fiberglass 200 g/m2 and treated on both sides with a poly-urethane resin. AF BAGS contain both thermo-expansive materials and ablative components that slowly release water steam. They have been designed to grant EI 180 to floors and EI 120 (according to EN 1366-3) to walls passed through by cables placed on cable trays. The system is also certified in combination with the panel AF PANEL (also treated on both sides with an ablative coating) and the sealant AF SEAL W.

AF BAGS ETA 16/0733

SUPPORT TYPE DEPTH (mm)

CABLE Φ (mm)

CLASS

Walls ≥ 125mm 200 ≤ 21 EI 120

Walls ≥ 125mm 200 21 ÷ 50 EI 90

Walls ≥ 125mm 200 50 ÷ 80 EI 60

Floors ≥ 200mm 240 ≤ 80 EI 120

Walls ≥ 125mm 120 ≤ 21 EI 120

Floors ≥ 150mm 120 ≤ 21 EI 120

Series AF BAGS EI 180

Product name Dimension Code

AF BAGS 100 100 x 25 x 120 mm B10A

AF BAGS 150 150 x 30 x 120 mm B15A

AF BAGS 200 200 x 30 x 120 mm B20A

AF BAGS 250 250 x 35 x 120 mm B25A

AF BAGS 300 300 x 35 x 120 mm B30A

15

AF MASA

Fire-rated cushion for cable penetrations

DESCRIPTION AF MASA is a fire-rated cushion designed to grant EI 120 (according to EN 1366-3) to the walls and floors passed through by electric cables placed on cable trays. AF MASA is highly resistant to cold smokes thanks to its permanent elasticity (sponge effect). When exposed to fire at a temperature that exceeds 180° C, the intumescent cushion forms an expanding carbon foam that seals the openings and blocks the passage of flames, smoke, and gasses. AVAILABLE SIZES Length: 1000 mm Width: 120 mm Thickness: 30 mm Density: 210 kg/m3 Class reaction to fire: B2 Thermal insulation: 0.062 W/mK FIELD OF APPLICATION The product AF MASA is used to seal the passages of electric cables placed on cable trays on walls and floors. APPLICATION METHOD 1. Measure the width of the cable tray and cut to size the cushion 2. Place the sections of the cushion AF MASA inside the cable tray and be sure

that the certified side of 120 mm is parallel to the « thickness of the wall » until reaching the complete obstruction of the support

3. Seal the remaining space between the opening and the cable tray with the panel AF PANEL and the acrylic sealant AF SEAL W

WARNING Product for professional use. Always wear gloves when handling or installing the material. PACKAGING AND STORAGE Cardboard boxes. There is no is no time limit for the storage of the product if it is kept in a dry envi-ronment. SPECIFICATIONS Supply and installation of the fire-rated cushion AF MASA. It is made of a polyu-rethane based material and an intumescent material. It has been designed to grant EI 120 (according to EN 1366-3) to the walls and floors passed through by electric cables placed on cable trays. The system has been tested also in combi-nation with a double layer of AF PANEL (treated on both faces with the paint AF SEAL T) and the acrylic firestop sealant AF SEAL W. The certified side is the one of 12 cm. CERTIFICATIONS Class EI 120 (EN 1366-3) Plasterboard wall Class EI 120 (EN 1366-3) Aerated concrete wall Class EI 120 (EN 1366-3) Concrete floor

16

DESCRIPTION AF JUNCTION BOX is an intumescent stripe designed to restore integrity and thermal insulation to EI 120 walls that contain electric boxes. AF JUNCTION BOX is a pre-shaped thermo-expansive stripe that can be installed inside the plastic box without removing it from the wall. In case of fire, the intu-mescent material expands until the volumetric compartment occupied by the electric box is completely saturated.

AVAILABLE SIZES AF JUNCTION BOX is available for electric junction boxes up to the maximum size of 392x150x75 mm

APPLICATION METHOD 1. Remove the junction box cover 2. Insert the intumescent stripe AF JUNCTION BOX at the bottom of the plastic

case and ensure that it adhere to the wall (it is possible to make a hole to insert additional electric cables)

3. Close the electric junction box cover

PACKAGING AND STORAGE Pre-cut elements in cardboard boxes. Each box contains 50 pieces. As long as the product is kept in a dry environment there is no time limit regard-ing its storage. SPECIFICATIONS Supply and installation of the intumescent stripes AF JUNCTION BOX. These stripes contain the intumescent material FIREFILL 100. AF JUNCTION BOX are cut to size (up to 392x152x75 mm). The latter have been designed to grant EI 120 to the walls in presence of junction boxes.

CERTIFICATIONS Class EI 120 (EN 1366-3) Plasterboard wall

DESCRIPTION AF E-BOX is an intumescent stripe designed to grant EI 120 (according to EN 1366-3) to plasterboard walls containing electric boxes.

APPLICATION METHOD Follow the same steps highlighted for AF JUNCTION BOX

AVAILABLE SIZES AF E-BOX 503 for the standard boxes 503 (50 pieces/box) AF E-BOX 504 for the standard boxes 504 (50 pieces/box)

PACKAGING AND STORAGE Pre-cut elements in cardboard boxes. The box contains 50 pieces. As long as the product is kept in a dry environment, there is no time limit regard-ing its storage. SPECIFICATIONS Supply and installation of the intumescent stripe AF E-BOX. It contains the intu-mescent material FIREFILL 50. This stripe has been designed to grant EI 120 to the walls in presence of standard electric boxes 503 / 504.

CERTIFICATIONS Class EI 120 (EN 1366-3) Plasterboard wall

Instumescent stripes for standard and junction electric boxes

AF JUNCTION BOX / AF E-BOX

AF JUNCTION BOX

AF E-BOX

17

AF COVER LIGHT

DESCRIPTION AF COVER LIGHT is a light cover designed to grant REI 120 (according to EN 1365-2) to false ceilings that contain recessed lights. AF COVER LIGHT is made of mineral wool and glass fiber. The outer layer is cov-ered by a special aluminum foil and the internal one is treated with an intumes-cent paint AVAILABLE SIZES 150x150mm (cone shape) 250x250mm (cone shape) 300x300x250mm 600x600x150mm Other sizes are available upon request FIELD OF APPLICATION AF COVER LIGHT was designed to protect against fire the recessed lights in false ceilings. APPLICATION METHOD 1. Place the flexible protection AF COVER LIGHT over the recessed light in the

false ceiling. The power cables can be placed between the protection and the false ceiling.

WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard sizes. As long as the product is kept indoor under normal conditions, there is no time limit regarding its storage. SPECIFICATIONS Supply and installation of the flexible protection AF COVER LIGHT. It consists of a padded fiber glass fabric between two mineral fibers; one is covered with an aluminum foil and the other one is treated with an intumescent paint. AF COVER LIGHT has been designed to grant REI 120 to recessed lights in false ceilings. CERTIFICATIONS Class REI 120 (EN 1365-2) Reinforced concrete floor protected by a false ceiling in mineral fiber

REI 120 protection for recessed lights in false ceilings

18

AF COVER AIR

REI 120 protection for the ventilation points present in false ceilings

DESCRIPTION AF COVER AIR is a flexible protection designed to grant REI 120 (according to EN 1365-2) to the false ceilings in presence of air diffusors/ventilation points. AF COVER AIR consists of a mineral wool stripe inserted between two layers of fiber glass. The external face is covered with a foil of aluminum and the internal one is treated with an intumescent paint, AF COVER AIR is a lightweight and flexible protection. Therefore, it is easy to install and does not overload the false ceiling. AVAILABLE SIZES 600x600x150mm for pipes (diameter between 160 and 315 mm) Other sizes are available upon request FIELD OF APPLICATION AF COVER AIR has been designed to protect against fire the false ceilings in pres-ence of air diffusors. APPLICATION METHOD 1. Place AF COVER AIR on the air diffusor 2. Place the fire-rated element AF COLLAR around the air diffusor and secure it

the flexible mat AF COVER AIR WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes. As long as the product is kept indoor under normal conditions, there is no time limit regarding its storage. SPECIFICATIONS Supply and installation of the flexible protection AF COVER AIR. It consists of a padded fiber glass fabric between two layers of mineral fiber; one covered with an aluminum foil and the other one treated with an intumescent coating. The system not only consists in a flexible mat but it also includes the fire-rated circu-lar element AF COLLAR. The system AF COVER AIR grants REI 120 (according to EN 1365-2) to the false ceilings in presence of air diffusors. CERTIFICATIONS Class REI 120 (EN 1365-2) Reinforced concrete floor protected by a false ceiling in fiber

Stripe

19

AF COVER SPLIT

REI 120 protection for recessed air conditioners in false ceilings

DESCRIPTION AF COVER SPLIT is a protection designed to grant REI 120 (according to EN 1365-2) to the false ceilings in presence of recessed air condition systems such as split-type system. AF COVER SPLIT are designed to cover a broad range of split-type system availa-ble on the market. The cover consists of a mineral wool stripe inserted between two layers of fiber glass. The external face is covered with a foil of aluminum and the internal one is treated with an intumescent coating. In order to protect the high-pressure refrigerant pipe and the condensate pipe are provided proper fire-rated collars to be mounted on site. AF COVER SPLIT is a lightweight and flexible protection. Therefore, it is easy to install and does not overload the false ceiling. AVAILABLE SIZES 600x600x350mm Other sizes are available upon request APPLICATION METHOD 1. Place AF COVER SPLIT on the split-type system (making the openings where

the pipe intakes are) 2. Place the element AF COLLAR around the pipes and secure it with the includ-

ed screw. PACKAGING AND STORAGE Cardboard boxes. As long as the product is kept indoor under normal conditions, there is no time limit regarding its storage. SPECIFICATIONS Supply and installation of the flexible protections AF COVER SPLIT. They consist of a padded fiber glass fabric between two layers of mineral fiber; one covered with aluminum and the other one treated with an intumescent coating. The sys-tem not only consists in a flexible mat but it also includes the fire-rated circular element AF COLLAR: The system AF COVER SPLIT grants REI 120 (according to EN 1365-2) to the false ceilings in presence of split-type systems. CERTIFICATIONS Class REI 120 (EN 1365-2) Reinforced concrete floor protected by a false ceiling in fiber

Plasterboard

Pipes

AF COLLAR

AF COVER SPLIT

20

AF COVER STRING

Fire-rated element for small penetrations in false ceilings

DESCRIPTION AF COVER STRING is an element designed to grant REI 120 (according to EN 1365-2) to false ceilings passed through by service installations (electric cables, corru-gated pipes, suspension chains, threaded rods, etc.). AF COVER STRING is a cylinder rock-wool element covered with reinforced alu-minum, and that has a longitudinal cut that enables its opening. Once placed around the element to be protected in the false ceiling, the remain-ing space between the inner surface of the cylindrical element and the element to be protected has to be filled with the firestop sealant AF SEAL W. They system is complemented by the ablative paint AF SEAL W used to fill the space between the element to be protected and the rock-wool cylinder. CHARACTERISTICS Aspect: cylindrical rock-wool element covered with aluminum Sizes: Ø 70 mm ext.; Ø 30 mm int.; H 50 mm Weight: 16 gr/piece Maximum diam. of the passage: 25 mm Fire resistance: REI 120 APPLICATION METHOD 1. Place AF COVER STRING around the element to be protected on the false ceil-

ing 2. Apply the fire-rated sealant AF SEAL W inside the cylindrical element until

reaching the complete obstruction of the passage WARNING Product for professional use. Always wear gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes. As long as the product it is stored under standard conditions there is no time limit

regarding its storage.

SPECIFICATIONS Supply and installation of the element AF COVER STRING for the protection of small passages in false ceilings. The system consists of the cylindrical rock-wool element AF COVER STRING and the acrylic firestop sealant AF SEAL W. The sys-tem as a whole grants REI 120 (according to EN 1365-2) to the false ceilings in mineral fiber. CERTIFICATIONS Class REI 120 (EN 1365-2) False ceiling

Threaded rod Electric cable

Corrugated pipe Suspension chain

AF SEAL W

AF COVER STRING

False ceiling

21

AF PSR 90/120

Fire-rated protection for metal rods

DESCRIPTION AF PSR 90 and AF PSR 120 are fire rated elements designed to grant respectively R 90 and R 120 to metal rods. They are constituted of two highly concentrated rock-wool cylindrical structures. The inner layer is treated with a special component that contains crystalized water molecules. When a fire occurs, this ablative coating releases water steam that helps keeping low the temperature of the metal rod. CHARACTERISTICS PSR 120 PSR 90 Weight: 100 kg/m3 100 kg/m3 Average thickness: 30+30mm 30+40mm Diameter of the inner cupel layer A: 35mm 35mm Diameter of the external layer B: 102mm 140mm External diameter: 162mm 182mm Internal diameter of the cover protection: 194mm 194mm External diameter of the cover protection: 334mm 334mm Length of the cupel: 400mm 400mm Length of the cover protection: 1200 mm 1200 mm Weight (A+B) 3,00 kg/m 2,5 kg/m PACKAGING AND STORAGE The product is supplied on pallets. The product must be kept in a closed place away from moisture and weathering. WARNING Product for professional use. Always wear gloves and safety glasses when handling and installing the material. FIELD OF APPLICATION 1. Open AF PSR 90/120 at its longitudinal section 2. Place it around the metal rod 3. Repeat the operation by using and ensure to offset the transversal and longi-

tudinal edges 4. Secure the whole system with a steel braided wire or alternatively install a

steel shell which thickness is 4/10mm SPECIFICATIONS Supply and installation of the system AF PSR 90 / 120. The system consists of two high density concentrated rock-wool elements. For a R 120 protection, the inner layer is covered with the product AF SEAL T and the outer one is provided with an aluminum coating. The system has been designed to grant R 90 / R 120 to metal rods. CERTIFICATIONS Class R 90 / R 120 Metal rods on evaluation <350 ° C

AF PSR 120

AF PSR 90

22

AF PANEL

Fireproofing panel for the protection of openings (1/2)

DESCRIPTION AF PANEL is a ready-to-install fireproof panel designed to grant EI 120/ EI 180 (according to EN 1366-1/3/4) to walls and floors in presence of openings. AF PANEL is a high density (150 kg/ m3) non combustible rock fiber slab (class A1) treated on both faces with an acrylic ablative coating. AF PANEL can easily be cut and shaped with a knife or a saw. When the temperature exceeds 180 C°, the aspect of AF PANEL changes and its

coating begins emitting water steam. This process allows the absorption of ener-

gy, thus slowing down the increase of the temperature.

CHARACTERISTICS Length: 1000 mm Width: 500 mm (upon request up to 1200X600 mm) Thickness: 52 mm Density: 150 kg/m3 Color: white Thermal conductivity: 0,036W/mK Average acoustic absorption: αs 0.64 CERTIFIED APPLICATIONS AF PANEL has been certified in combination with the main products of the line AF Systems such as AF BAGS, AF MASA, AF COLLAR, AF SLEEVE B, AF SEAL W to: 1. Seal the electric cables passages in walls (flexible and rigid) and floors

(concrete) 2. Seal the pipes passages (combustible and metal ones) in walls (flexible and

rigid) and in floors (concrete) 3. Seal the expansion joints when their width do not exceed 2-5cm and usually

with perimetral sealing of mixed penetration systems with fire dampers and other installations (i.e. metal pipes, electric cables, combustible pipes..)

4. Seal the gap between curtain walls and floors 5. Seal fire dampers APPLICATION METHOD 1. Measure the size of the opening 2. Cut to size the AF PANEL to perform a double sealing 3. Use the acrylic fire rated sealant AF SEAL W to seal the different pieces of the

slab PANEL

23

AF PANEL

Fireproofing panel for the protection of openings (2/2)

WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes on pallets. The product remains in perfect state as long as it is stored under standard condi-

tions.

SPECIFICATIONS

Supply and installation of the semi rigid rock-wool slab AF PANEL. It is treated on both sides with the coating AF SEAL T. The latter measures 1000x500x50 mm and has a nominal density of 150 kg/m3. It grants EI 120/EI 180 (according to EN 1366-1/3-4) for the walls and floors in presence openings. AF PANEL can be cut with a simple cutter. The sealing is completed with the acrylic fire-rated sealant AF SEAL W applied on the edges. CERTIFICATIONS Class EI 180 (EN 1366-3) Concrete floor Class EI 180 (EN 1366-3) Aerated concrete wall Class EI 120 (EN 1366-3) Plasterboard wall Class EI 120/180 (EN 1366-4) Joints on concrete wall Class EI 120/180 (EN 1366-4) Joints on concrete floor Class EI 120 (EN 1366-3) Plasterboard wall Class EI 120 (EN 1366-3) Aerated concrete floor Class REI120 (EN 1365-2) Fiber false ceiling

24

AF JOINT

Fire rated element for expansion joints

DESCRIPTION AF JOINT is a rock fiber element designed to grant EI 180 (according to EN 1366-4) to expansion joints having a width between 3 and 60 cm. Any building and fire compartment needs some internal gaps to compensate the natural expansion of its rigid structures caused by temperature and load varia-tions. In case of fire, these gaps are potential pathways for fire expansion and must be sealed with flexible fireproofing materials. AF JOINT is specifically de-signed to perform this task. Its flexible structure can compensate for dilatations/compressions up to 7.5% of the original volume. The product is supplied already treated with an ablative paint on both faces. CHARACTERISTICS Sizes: 1000x100x80 mm (piece) 1000x100x50 mm (piece) other sizes are available upon request Weight: 100 Kg/m3 Chemical resistance: excellent Resistance to humidity: excellent Reaction to fire: class A1 Thermal conductivity ʎD : 0,039 W/mK Average acoustic absorption αs: 0.73 FIELD OF APPLICATION AF JOINT is used to protect against fire the expansion joints measuring between 30 and 600 mm. APPLICATION METHOD 1. Measure the exact size of the joint that needs to be sealed. Keep in mind that

if the size is different from the standard dimensions, it is possible to compose different joint seals to match the exact size or to ask for customized sizes (the maximum certified width is 600 mm)

2. Compress slightly the joint seals (5% of their volume) and insert them symmetrically to the openings. If the joint is small you can cut AF JOINT with a simple knife/cutter. If the joint is wider it is possible to compose different layers of AF JOINT and connect them between each other using the special acrylic sealant AF SEAL W

3. For width >200mm spread AF SEAL W on top of the joints. WARNING Product for professional use. Always wear gloves when handling and installing the material. PACKAGING AND STORAGE Boxes containing 10/20 pieces. The product remains in perfect state as long as it is stored under standard condi-

tions.

SPECIFICATIONS Supply and installation of the fire-rated joint seal AF JOINT. It has been designed to protect expansion/structural joints (width between 3 and 60 cm) from fire. AF JOINT has a nominal density of 100 kg/m3 and it is treated on both faces with the coating AF SEAL T. The available sizes are the following: 1000x100x50 mm and 1000x100x80 mm. Customized sizes are available upon request (up to 1000x100x600mm). AF JOINT grants EI 180 (according to EN 1366-4) to expan-sion joints in walls and floors.

CERTIFICATIONS Class EI 180 (EN 1366-4) Concrete wall Class EI 180 (EN 1366-4) Concrete floor

25

AF CORD

Fire rated element for expansion joints

DESCRIPTION AF CORD is a fire-rated element developed and certified to grant EI 120 to ex-pansion joints with a maximum width of 30 mm. Applying AF CORD is easy and intuitive. It requires to insert the cord inside the joint simply using your hands. AF CORD consists of a rock wool cord coated with a polyamide net. CHARACTERISTICS Nominal diameter: 50 mm Length: 25 m / roll Nominal density: 50kg/mc Weight: 300gr/m Max joint width: 30 mm Fire resistance: EI 120 APPLICATION METHOD 1. Insert the AF CORD inside the joint simply by compressing it. SPECIFICATIONS Supply and installation of the fire-rated AF CORD for expansion joints. AF CORD consists of a rock wool cord coated with a polyamide net. WARNING Product for professional use. Always wear gloves when handling and installing the material. PACKAGING AND STORAGE Boxes containing rolls with maximum length of 25m each. The product remains in perfect state as long as it is stored under standard condi-

tions.

CERTIFICATIONS Class EI 120 (EN 1366-4) Concrete wall

26

AF SEISMIC JOINT

Fire-rated element for expansion joints subject to movement

DESCRIPTION AF SEISMIC JOINT is a fire rated seal designed to grant EI 120 properties (according to EN 1366-4) to expansion joints subject to movement. Its use is par-ticularly recommended for expansion joints with movement. (i.e.: areas with a high seismic risk). AF SEISMIC JOINT consists of two rock-wool mats treated with an ablative coating. The faces are covered with a foil of aluminum and a metal grid. CHARACTERISTICS Aspect: mat covered with a foil of aluminum and a metal grid Sizes: 3000x1000x60 mm (roll) Peso: 7.5 Kg/m2 Maximum width of the joint: 600 mm Maximum movement: ± 50 % of the nominal width Size of the plate: 300x30x1.5 mm Resistance to fire: EI 120 - H - M050 - B FIELD OF APPLICATION AF SEISMIC JOINT is used to protect against fire the expansion joints (measuring between 100 and 600 mm) subject to movement. APPLICATION METHOD 1. Measure the width of the expansion joint 2. Cut perpendicularly the roll considering the width of the joint + 50% +

100mm 3. Place the seal inside the expansion joint and secure the edges to the struc-

ture (overlap of 50 mm). Use perforated metal plates and metal anchor screws of 8x60mm

4. Place the metal grid on the unexposed side to fire WARNING Product for professional use. Always wear gloves when handling and installing the material. SPECIFICATIONS Supply and installation of the flexible protection AF SEISMIC JOINT. It grants EI 120 to expansion joints with movement measuring up to 600 mm ± 50% (according to EN 1366-4). The protection is made of rock-wool treated with an ablative coating and a foil of aluminum. PACKAGING AND STORAGE Rolls on pallets. As long as the product is stored under standard conditions there is no time limit

regarding its storage.

CERTIFICATIONS Class EI 120 (EN 1366-4) Joints on concrete floor Class EI 120 (EN 1366-4) Joints on concrete wall

Metal grid

AF SEISMIC JOINT

Glass fabric

Grid and aluminum foil

Grid and aluminum foil

27

AF CABLE COAT

Firestop paint for electric cables

DESCRIPTION AF CABLE COAT is an ablative paint designed to stop the spread of flames on electric cables according to CEI 20-22/II. When the temperature reaches 180°C, the paint releases water steam thus blocking the melting of the external sheath and the propagation of fire. CHARACTERISTICS Weight: 1,25 Kg/L +/- 0,1 Color: white Consistency: thixotropic paste Out of touch: 60 min. Hardening speed: 1,5 mm /24 h at 20 °C Content: >70 % p.p. Cleaning tools: water Application temperature: 5°C / 40°C Stability: 0,3% (approximately) FIELD OF APPLICATION The paint AF CABLE COAT has been designed to stop the spread of flames on electric cables. The use of the product AF CABLE COAT is recommended in all areas where fire safety requirements are critical to prevent major damages (refineries, power generations plants) due to a large amount of electric cables. APPLICATION METHOD 1. Ensure that the surfaces to be treated are clean and not covered with dust or

grease residues 2. Mix the product with mechanical agitators before use 3. Ensure that when diluting the product with water that it does not exceed

10% of weight of AF CABLE COAT in order to avoid its excessive shrinkage during the drying phase

4. Apply the paint AF CABLE COAT with a brush / or single rolls or airless spray guns for dense liquids (paint 1m every 20m for horizontal sections, paint 1m every 5m for vertical sections and paint 1m every 5m for sections with bifur-cations). The certified quantity is 10 kg for each painted square meter. For instance, if the cable tray width is 500mm, then apply 5kg on the part to be treated. The product has been tested in accordance with the standard CEI 20-22/II.

WARNING Product for professional use. Always wear gloves and safety glasses when handling and installing the material. PACKAGING AND STORAGE Bucket of 20kg. As long as the product is kept in its original package, at a temperature between 5°C and 35°C , it remains in perfect conditions during 6 months. SPECIFICATIONS Supply and installation of the firestop paint AF CABLE COAT on electric cables placed or not on cable trays. CERTIFICATIONS Istituto CESI Certification n° A5058128 (CEI 20-22/II) Istituto IMQ Certification n° CN 16-0001455-01 (according to IEC 60332-3-10 and IEC 60332-3-22)

28

AF SEAL W

Acrylic fire-rated sealant for the protection of expansion joints, pushrod holes and penetrations

DESCRIPTION AF SEAL W is an acrylic sealant designed to grant EI 120 / EI 180 (according to EN 1366-1/3/4) to the walls and floors in presence of expansion joints, service in-stallations passages and pushrod holes in formworks. AF SEAL W is a water-based acrylic sealant that has high elasticity properties. CHARACTERISTICS Aspect: Thixotropic paste Color: White Weight: 1,4 kg/l ± 0,10 kg/l Drying time: 1h Complete hardening: 3,5 mm / 24h VOC: <1% Maximum enlargement: 200% (DIN 52455) Temperature during operation: -20° C /+65° C FIELD OF APPLICATION AF SEAL W is used to seal expansion joints, fireproofing doors, service installation penetrations and pushrod holes in formworks. AF SEAL W is used in combination with other products of the line AF Systems. APPLICATION METHOD 1. Define the area to be sealed and apply consequently the fire-rated acrylic

sealant AF SEAL W WARNING Product for professional use. Avoid any contact of the product with the eyes and skin. In case of contact, wash the parts with water and if necessary consult a doctor. Always wear gloves when handling and applying the material. PACKAGING AND STORAGE Cartridges of 300 ml (20 cartridges/box). Buckets of 6, 12,5 and 20kg. Keep the product at a temperature between 5ºC and +40ºC. In such conditions, the product remains in perfect conditions for 9 months. SPECIFICATIONS Supply and application of the fire-rated acrylic sealant AF SEAL W. It has a spe-cific weight 1,35 kg/ liter ± 0.1, and it grants EI 120 / EI 180 (according to EN 1366-1/3/4) to expansion joints, fireproofing doors, service installation penetra-tions and pushrod holes in formworks. CERTIFICATIONS Class EI 120/180 (EN 1366-4) Joints in an aerated concrete wall Class EI 120 (EN 1366-4) Joints in concrete floor Class EI 180 (EN 1366-3) Concrete floor Class EI 180 (EN 1366-3) Aerated concrete wall Class EI 120 (EN 1366-3) Plasterboard wall Class EI 120 (EN 1366-1) Aerated concrete wall Class EI 120/180 (EN 1366-1) Concrete floor

29

AF FOAM RM

Fireproofing foam for the protection of service installation penetrations and linear joints

DESCRIPTION AF FOAM RM is a mono-component fireproofing foam designed to grant EI 120 / EI 180 (according to EN 1366-3/4) to concrete floors with service penetrations or linear joints. Upon application it hardens and becomes highly resistant to fire. Each cartridge contains 740 ml of prepolymers in combination with a special blend of oils used as propellants. Its fast application and excellent adherence to most surfaces make it a very effi-cient choice to seal small gaps and holes. Its semi-rigid composition combines excellent acoustic insulation with thermal insulation properties. CHARACTERISTICS Density: 25-30 Kg/m3 approximately Temperature of application: min 5°C Time of creation: 20-25 min Resistance to temperature: -40°c +90°C Absorption of humidity: max 1% vol. Thermal conductivity: 0,029W Type of reaction to fire: B1 FIELD OF APPLICATION Filling and insulating holes and cavities of concrete. Filling interstices around windows and doors as well as small cavities in the wall. APPLICATION METHOD 1. Shake the container of AF FOAM RM for at least one minute 2. Insert the nozzle at the spray head 3. Turn down the container 4. Apply the foam inside the joint or hole 5. Remove the overflowing edges with a simple blade knife / cutter WARNING The product is flammable when it is still in the cartridge. The product should be applied away from any incandescent material and from flames. PACKAGING AND STORAGE 12 cartridges in a box. As long as the product is kept in its original container, it remains in perfect condi-tions during 8 months. Keep the product away from heat sources. SPECIFICATIONS Supply and application of the mono-component polyurethane foam AF FOAM RM. The foam is contained within a package of 740 ml. AF FOAM RM grants EI 180 (according to EN 1366-3/4) to floors with service penetrations or linear joints. CERTIFICATIONS Class EI 180 (EN 1366-3) Depth of the floor 200mm x 30mm opening width in case of electric cables penetrations Class EI 120 (EN 1366-3) Depth of the floor 200mm x 25mm opening width in case of metal elements Class EI 120 (EN 1366-4) Depth of the floor 200mm x 50 mm opening width in case of dilatation joints Class EI 180 (EN 1366-4) Depth of the wall 150mm x 50 mm opening width in case of dilatation joints

30

AF GRAPHIT FOAM

Fireproofing foam for the protection of empty openings and service installation penetrations

DESCRIPTION AF GRAPHIT FOAM is a thermo-expansive foam designed to grant EI 120/180 (according to EN 1366-3) to flexible walls and rigid floors in presence of openings with and without passage of service installations. It is a two components polyurethane based material. Its special cartridge allows the simultaneous extrusion of both components. Once hardened, the AF GRAPHIT FOAM can be easily cut and shaped by using a knife or other appropriate tools. It is very easy to apply and it enables the insertion of additional cables later on. AF GRAPHIT FOAM can be used for max opening size 400x250mm. CHARACTERISTICS Total capacity of the cartridge: 330 ml Color: red - dark brown Reaction time: 10sec. approximately Drying time: 30sec. approximately Cutting possibility: 1 min approximately Increase of volume: 3-5 times (free expansion) Performance after application: 1000-1700 ml approximately Storage/Transportation temperature: 5-30°C Application temperature: 10-35°C FIELD OF APPLICATION AF GRAPHIT FOAM is used to seal: Small openings difficult to reach. Electric wiring, fire crossings, cables and wire trays. Insulated metal pipes. APPLICATION METHOD 1. Clean and insert the mixer in the cartridge and place it in the spray gun 2. Apply AF GRAPHIT FOAM starting from the farthest point and carefully so as

not to dip the nozzle of the mixture in the extruded product 3. Seal completely the opening, reaching a minimum depth of 120 mm without

interrupting the extrusion more than 5 seconds in order not to cause the premature hardening of the material

WARNING Product for professional use. Always use gloves when handling the material. When the cartridges are completely empty, they are comparable to solid waste. To eliminate partially or completely filled cartridges, use the EWC waste code CEE 070208. When the skin is in direct contact with the product, allergic reactions may ensue. PACKAGING AND STORAGE Boxes of different sizes. As long as the product is kept under standard storage conditions, it remains in perfect state during 6 months. SPECIFICATIONS Supply and application of the semi-rigid and thermo-expansive foam AF GRAPHIT FOAM. It is a two components polyurethane based material and it has the speci-ficity to triple or quintuple its original volume. AF GRAPHIT FOAM is contained in a cartridge of 330 ml and a twin-component applicator is used to carry out its extrusion. AF GRAPHIT FOAM is able to grant EI 120 (according to EN 1366-3) to walls in presence of openings difficult to reach and installations passages’. CERTIFICATIONS Class EI 120 (EN 1366-3) Plasterboard wall Class EI 180 (EN 1366-3) Aerated concrete floor

31

AF FIREGUARD 3

Fire-rated mat for metal ventilation ducts

DESCRIPTION AF FIREGUARD 3 is a flexible mat designed to grant EI 120 (according to EN 1366-1) for ventilation metal ducts. AF FIREGUARD 3 is applied in a single layer along the entire length of the duct. The product is made with a rock-wool mat quilted of wire mesh and covered with aluminized polyethylene on the outer face. The inner face of the mat is treated with an ablative component protected by a fiber glass fabric. CHARACTERISTICS Weight: 5 Kg/m2 approximately Size: 6000 x 1000 x 30 mm Density: 100 kg/m3 Color: Ext: silver/ Int: white Thermal conductivity: 0,036 W/mK à 10°C Water absorption: ≤ 1 kg/m2 FIELD OF APPLICATION AF FIREGUARD 3 is used to protect against fire the metal ventilation ducts. APPLICATION METHOD 1. Measure the size of the ventilation duct 2. For Rectangular sections: Increase the perimeter of the section by 320mm

(30mm for each side + 200mm for the overlap of the two edges) 3. For Circular sections: Increase the diameter by 60mm and add 200 mm for

the overlap of the two edges 4. Cut AF FIREGUARD 3 to obtain the size needed to wrap the ventilation metal

duct 5. Wrap the mat around the duct, while overlapping its two edges by 200 mm 6. Attach the mat with a steel wire (three loops per meter) 7. Apply on the overlap the adhesive stripe AF BAND 3 8. Attach AF BAND 3 by placing a 1 mm wire around the duct 9. Repeat again and again the operations until covering the whole duct SPECIFICATIONS Supply and installation of the fire-rated mat AF FIREGUARD 3 for EI 120 / EI 180 (according to EN 1366-1) of metal air ducts. AF FIREGUARD 3 consists of mineral fiber 30 mm thick and with 100 kg/m3 density. It is covered in surface with alumi-num and a steel mesh. It is treated with the special coating AF SEAL T. The trans-verse edges must be covered with the adhesive stripe AF BAND 3. WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Rolls of 6 m on pallets. Other sizes are available upon request. As long as the product is kept away from humidity and weathering, it remains in perfect state. CERTIFICATIONS Class EI 120 horizontal (EN 1366-1) Rectangular and circular ducts Class EI 120 vertical (EN 1366-1) Rectangular ducts Class EI 180 vertical (EN 1366-1) Circular ducts

AF BAND 3

DESCRIPTION AF BAND 3 is an adhesive stripe easy and quick to install. No specific device is required to carry out its installation. AF BAND 3 has to be placed on the opening and subsequently attached with a mere steel wire (thickness 10/10 mm). Le product is available in rolls of 50 m. CERTIFICATIONS It is certified in combination with AF FIRE-GUARD 3.

32

AF FIREGRILLE

DESCRIPTION AF FIREGRILLE is a fire-rated grille designed to grant EI 120 (according to EN 1366-3) to ventilation openings. AF FIREGRILLE is made of stainless steel. The outer structure is made of galvanized steel and a series of wing supports. On these wings is placed the intumescent material. When a fire occurs and the tempera-ture rise above 200°C the intumescent material expands and closes the internal space avoiding thus the passage of smoke and flames. The internal space reduction is 30% for dimension up to 300x300mm and up to 40% for dimension bigger than 300x300mm. CHARACTERISTICTS The available sizes are the following 300x300x100 mm 300x150x100 mm 300x200x100 mm 200x200x100 mm APPLICATION METHOD 1. Make a hole in the wall according to the size required by the project 2. Insert the metal grille AF FIREGRILLE in the wall and attach it with screws 3. Seal any cracks with the acrylic firestop sealant AF SEAL W WARNING Product for professional use. Always use gloves when handling and installing the material. PACKAGING AND STORAGE Cardboard boxes. As long as the product is kept under standard storage conditions, it remains in perfect state. SPECIFICATIONS Supply and installation of the fire-rated AF FIREGRILLE. It consists in a stainless steel box that contains internal the intumescent material Firefill 100 placed on the metal wing supports. AF FIREGRILLE has been designed to grant EI 120 (according to EN 1366-3) to walls in presence of ventilation openings. CERTIFICATIONS Class EI 120 (EN 1366-3) Flexible and Rigid wall (min. thickness 125 mm up to 300x300mm) Class EI 120 (EN 1363-1) Rigid wall (min. thickness 200mm above 300x300mm)

Fire-rated grille for ventilation openings

Fire exposed side

33

Some references

Thermal plant Escatron - Zaragoza Paper plant Puigepelat - Tarragona Terminal Méthanier - Dunkerque

Hadid Tower - Milano Unicredit - Milano

Isozaki Tower - Milano Bosco Verticale - Milano IKEA - Different locations

Zeebrugge LNG Terminal - Bruges Hotel Four Seasons - Milano NH Hotels - Different locations

Metro - Copenhagen

34

Remarks

35

36

´

Copertina vedere l’altro pdf foglio formato A3