CONVOY JAMMERS - CPM Elettronica
4
Vehicle Integrated Jammer System based on Active and/or Reactive Jamming Technology. The objective of our systems is to block the RF ignition of an Improvised Explosive Device (IED), as the convoy approaches it. Preventing the explosion, saving the lives of the crew and avoiding collateral damages. CPM Elettronica can boast a significant experience in designing and manufacturing highly sophisticated jammer systems for Military, Governmental and VIP clients around the world. For this reason, CPM Elettronica is able to supply a suitable solution for any requirement, in terms of jamming technology, RF power output, installation and antennas. CONVOY JAMMERS
Transcript of CONVOY JAMMERS - CPM Elettronica
Vehicle Integrated Jammer System based on Active and/or Reactive Jamming Technology.
The objective of our systems is to block the RF ignition of an Improvised Explosive Device (IED), as the convoy approaches it. Preventing the explosion, saving the lives of the crew and avoiding collateral damages. CPM Elettronica can boast a significant experience in designing and manufacturing highly sophisticated jammer systems for Military, Governmental and VIP clients around the world. For this reason, CPM Elettronica is able to supply a suitable solution for any requirement, in terms of jamming technology, RF power output, installation and antennas.
CONVOY JAMMERS
High Power Programmable Jammer Modules
CPM 500-2019
GENERAL DESCRIPTIONThe CPM-500-2019 is a digital Anti-RC-IEDs and Communications Modular Jammer, user-friendly, with on-field programming capabilities. The system can be configured to hold up to 24 stand-alone modules in order to cover the 20-6000 MHz spectrum with an RF output power up to 2 KW, all contained in two 19” racks. Furthermore CPM can customize the Antenna System on the available vehicle and Installation Kit of each system allowing the best performance available.
KEY FEATURES • HIGH POWER
PROGRAMMABLE MODULES • STAND-ALONE MODULES
• SCALABLE SYSTEM • FULL COVERAGE FROM 20-
6000 MHZ • USER-FRIENDLY INTERFACE
AND REMOTE CONTROL • EASY PROMMABLE BY
EXTERNAL SD CARD
Medium Power Programmable Jammer
CPM HPRC-12B-CONVOY
KEY FEATURES • DESIGNED AND MANUFACTURED IN ITALY • INDEPENDENT PROGRAMMABLE BANDS BY
SD CARD ON THE REMOTE CONTROL • 12 X DIGITAL 30W JAMMER MODULES (+ 12
BANDS OPTIONAL) • SILENT AUTOMATIC FORCED AIR COOLING
SYSTEM • APPROXIMATELY 400W POWER OUT • EASY USE REMOTE CONTROL • VEHICLE INSTALLATION ADAPTER KIT
CPM ACTIVE/REACTIVE JAMMER TECHNOLOGY
STRONG PEAKS OF SIGNAL STRONG PEAKS OF SIGNAL OVER THE TRADITIONAL OVER THE TRADITIONAL
JAMMER NOISEJAMMER NOISEIDENTIFIED & JAMMEDIDENTIFIED & JAMMED
TRADITIONAL FULL BAND TRADITIONAL FULL BAND JAMMERS TRESHOLDJAMMERS TRESHOLD
• HIGHEST EFFICIENCY AGAINST THREATS
• GREATER JAMMING RADIUS • INTELLIGENT RF POWER
ALLOCATION • USER FRIENDLY/AUTOMATIC
(SWITCH ON AND FORGET) • LOWER CONTINUOUS RF
EMISSION FOR THE HEALTH AND WELLNESS OF THE OPERATORS
ADVANTAGES OF REACTIVE JAMMING TECHNOLOGY
CPM 1000 ACTIVE/REACTIVE JAMMER
• INSTANTANEOUS COVERAGE OF THE MOST RISKY BANDS
• DETECTION: FAST FFT PROCESSING
• D/A FPGA REACTIVE® TECHNOLOGY
• INCREASED SPEED OF DETECTION (REACTIVE), RF POWER AND COVERAGE RADIUS
• JAMMING SIGNAL: WHITE GAUSSIAN NOISE (WGN) TECHNOLOGY
CPM COMPACT-ONE 600W ACTIVE JAMMER
• COMPACT 6 BANDS JAMMER • PROGRAMMABLE • HIGH POWER • 4U 19 INCHES STANDARD RACK
T/F +39 0652364204 | [email protected] | www.cpmelettronica.com
