Conveyor Specificatins Form - emicorp.com
Transcript of Conveyor Specificatins Form - emicorp.com
136
®
www.EMI corp.com
Conveyors and Automation Systems
Name / Company:
Email:
Address:
A. Describe Basic Application:
What are you Conveying?:Dimensions: (L x W x H)
Cavitation:Cycle Time:
Runner / Sprue Subgated: Yes NoDimensions: (L x W x H)
What are you Conveying from: (what is its height?):
What are you Conveying to:(what is its height?):
B. Specialty Applications:(Cooling Conveyors, air-water; Parts Diverters; Box Filling, Cycle Count, Weigh scale; Robotic Conveyors; Part/Runner Separation; etc.)
C. Basic Conveyor Information:
Model:Belt Width:
Length / Length "A": Length "B" (for 2 plane conveyors): Angle (for fixed angle conveyors):
Maximum Belt Speed (FPM): 20 40 80 Other:
D. Conveyor Height:
Infeed Belt Height:Discharge Belt Height:
Castors: Swivel Rigid Low Profile
E. Side Rails:
Rail Height: 2" 4" 8" 12" Other:Construction: Painted Stainless Galvanized
Angle: 90° 60° 45° Other:Extension Rails? Height Angle Length Location Clamp-on Bolt-on
Belt Lining:Belt Wipe / Brushes (see page 91):
Other:
F. Parts Containment & Handling:
Infeed Hopper Size (see page 134): Stainless CarbonMaximum Height, floor to top of Hopper:
Soft Drop Zone: (start point from infeed, & length)Discharge Chute: Stainless Carbon/mylar Teflon
Parts Diverter (specify type, see page 92): Other:
Conveyor Specifications Form
137
®
?
1’
?
1’
Specify Belt Direction
Specify: 15°, 30°, 45°
216-535-4848
Conveyors and Automation Systems
G. Electrical: Variable Speed: No Yes, Desired speed range: Motor Voltage: Alternate HP (see pg. 130): Magnetic Starter: (manual is standard) Controls Location: locate using motor M-? position Motor Location: Standard Alternate
H. Motor Locations:All Direct Drive Conveyors: M-1-M-4 and M-7-M-10 locations.Note: Under frame motor positions require chain/sprocket style drive (for an additional cost).
I. Robotic / Indexing: S-44 Indexing (see pg. 110): Relay Voltage: DC Variable Speed (see pg. 110): Manual Over-ride: to clear belt Over-ride Lockout: robot lock-out of over-ride Foot Pedal Switch: for over-ride Photoeye: for over-ride Reversing: upon bad part signal Part Relay Station: (infeed height) Part Relay Station: (discharge height)
J. Nose-Over: Conveyor Style: Two Plane Flat Cleated Belt Angle:
K. Belting: Alternate Cleat Height: ¹⁄₂" 1" 1¹⁄₂" 2" 3" Other: Alternate Cleat Centers: Clear Indent: (per side) Other: Water High Temp. Tefl ón Other: Alternate Color: White Black
L. Other:
Complete and submit forms electronically at www.EMIcorp.com/forms
Conveyor Specifi cations Form