Conveyor Belt, Belting and Rubber Hose and Fittings Catalog

CONVEYOR BELTING,EQUIPMENT ANDACCESSORIES

INDUSTRIAL HOSE,FITTINGS ANDACCESSORIES

0109

RUBBER DIVISION

RRububber Diber Division Cavision Catalotalogg

Local (706) 724-7792 Toll Free (800) 282-8556FAX (706) 724-8409 Website www.rsci.comFlorence (843) 413-1853 Savannah (912) 920-2760

Catalog Editor - Jamie M. Hope

Conveyor Belting,Equipment and

Accessories

Industrial Hose,Fittings andAccessories

601 Laney Walker Blvd.P.O. Box 1727

Augusta, GA 30901

Local (706) 724-7792Toll Free (800) 282-8556

FAX (706) 724-8409

RICHMOND SUPPLY COMPANYAND RUBBER DIVISION601 LANEY WALKER BLVD • P.O. BOX 1727AUGUSTA, GEORGIA 30901 • PHONE (706) 724-7792TOLL FREE 1-800-282-8556 • FAX (706) 724-8409

BELTING • PAINT • HOSE • SAFETY • POWER TRANSMISSION • PIPE-VALVES-FITTINGS • TOOLS

To Our Customers:

Thanks to customers like you, Richmond Supply Company is celebrating over 65 yearsin business. We've had the privilege of getting to know some great people through theyears - both those who've bought from us and those who've worked with us.

I'm proud of our service staff and their desire to satisfy your needs. I hope you find thisto be your experience in dealing with us.

Richmond Supply continues to improve its breadth of service; today we offer servicesthat range from welding metal hose and vulcanizing conveyor belt to installingdiaphragm seals on pressure gauges. We're organized by departments to give you thebest level of technical and support service. This catalog is of our Rubber Division, whichconsists of both our conveyor belting and hose departments. To complete yourRichmond Literature ask your sales representative about these other catalogs to beprinted in the near future.

• General Mill Supplies and Safety• Tools and Abrasives• Pipe, Valves and Fittings• Power Transmission• Paint and Coatings

The internet has quickly become the primary vehicle for providing technical support,information and seamless order entry and inquiry. Our web site, www.rsci.com, whileconstantly improving, provides quick delivery of helpful information on our full range ofproducts.

We're thankful for every opportunity to serve you and for our many years in business.Without customers like you it would not have been possible.

Levi W. Hill IVPresident

ORDERINGORDERINGWe have a dedicated staff of salesmen and technicians to help you order, install and use our products. If you needadvice or assistance, please call and ask for one of the inside salespeople, product specialists or the managementstaff. We are all here to help. Around the clock service is also available in case of emergency.

Orders can be placed by phone, by fax, by email, through the mail (and soon over the internet), or while you wait. Nomatter how an order is placed, though, a good description is crucial to the process. If you contact us to place anorder, it helps to have the description, quantity, catalog number, shipping destination, contact information, ordernumber and special instructions handy.

Telephone - During business hours (8 AM to 5 PM Eastern), call locally (706) 724-7792 or toll-free 1-800-282-8556.

Fax - 7 days a week, 24 hours a day, dial (706) 724-8409.

Mail - Clearly print all information, including item numbers, descriptions, and prices. Personal checks andCOD’s are welcome. Please do not send cash or money orders. There is no minimum order. Mail to :

Richmond Supply CompanyPO Box 1727Augusta, GA 30903-1727

Internet - We have an e-commerce site, www.rsci.com, that brings our inventory to your desktop for onlineordering. It features a searchable database of our products with pictures, features and benefits. We alsohave an email address that can be used to reach our sales staff: [email protected]

While You Wait - We have a large sales counter and product display area, and plenty of parking for anysize vehicle. We will welcome you as a counter customer, or we will give you a tour of our facility, upon shortnotice.

International Orders and Alaska/HawaiiExtra shipping costs are incurred for these orders. Please call us for estimated charges.

Special OrdersWe are happy to special order items not normally part of our inventory. Call for details.

BackordersStock shortages occur occasionally due to unexpected demand. Backorders are filled in the order received, usuallywithin 30 days, for normal stock items. You may cancel your order anytime by calling us at 1-800-282-8556.

PricingWe have omitted prices from the catalog due to changing market conditions. Call for current price quotes.

TermsCash discount of 1%, 10 days, net 30 days on approved credit. This is subject to change on special orders, and onsome contracts. All shipments are F.O.B. shipping point, unless otherwise agreed upon.

TaxesAll appropriate Federal, State and County sales taxes will be charged unless exemption certificate is on file.

Ordering, Shippingand ServiceInformation

SHIPPINGSHIPPINGMost orders are processed within 24 hours. Unless you request otherwise, your order will be shipped by our deliverytruck or by UPS Surface. We will ship via motor freight by the courier of your choice. Please call for details on ourdaily scheduled deliveries.

If you’re in a hurry, UPS Next Day Air and UPS Second Day Air are available. The shipping costs will be charged toyour credit card. Orders must be phoned in by 12 noon Eastern. Please call for current rates.

EXCHANGES AND RETURNSPlease check immediately for damage, shortage or error. Make proper notes on carrier’s receipt if goods are dam-aged or partly missing or not in good order. Claims must be reported within 10 days to be honored. We cannot beliable for damages or losses due to circumstances beyond our control.

Merchandise must not be returned without our consent. Request for return and credit should be made within 10 daysof receipt of material and must include a copy of the packing list. Returned goods must be in saleable condition.

Merchandise cut to specified length, size, dimension or ordered other than standard, is not returnable.

Terms of Returns60 days for credit or refund. 90-day warranty on product replacements unless otherwise stated. If you are returningmerchandise to the warehouse, you will be required to present your invoice. We are unable to give cash refunds, butyou will be issued a check through the mail in 7-10 days. A 15% restocking charge may be imposed on some items.

DISCLAIMERSDISCLAIMERSWe have included information indicating strength of material, safe working load, service recommendations, methodsof application, etc. We extracted data from manufacturers' catalogs and in doing so, cannot be sure our data is with-out error. If you are using this catalog as an engineering or specification guide please be sure to check themanufacturers' catalogs directly or speak with a Richmond Supply sales/service representative. While webelieve our content to be accurate, we cannot assume responsibility for misapplication due to typographicalerrors or omissions. THE CATALOG IS TO BE USED AS A GUIDE ONLY.

It is our intention to sell the best quality merchandise supplied by the most consistent, dependable manufacturers. Ifdefects are encountered after immediate, careful inspection, after receipt of materials, notify us at once. Do notattempt to repair.

We cannot allow claims for consequential damages, or for labor, repairs or other expenses incident to repair orinstallation of replacement material.

WARRANTY DISCLAIMERSince the vendor, Richmond Supply Company and Rubber Division, does not control the use of its products, there are no expresswarranties which extend beyond the description on the face hereof. Seller disclaims any implied warranties of merchantability orof fitness for any particular purpose. Since Seller cannot control the manner of use of its products after their sale, Seller will not beresponsible for any consequential or indirect damages. Concerning products for which Seller is acting only as a distributor ofproducts manufactured by other companies, Seller expressly limits its liabilities to any guarantees extended by the manufacturer,which guarantees Seller will pass through to the customer. Further, Seller will, at its option, either replace the goods sold orrefund the purchase price. No warranties will apply if the goods are in any way altered or modified after delivery by Seller.

Ordering, Shippingand ServiceInformation

ConversionChart

Fractionals mm Decimals Size mm Decimals Size mm Decimals Size mm Decimals Size mm Decimals

.001 .00004 4.0 .15748 9.398 .37 14.732 .58 20.066 .79.01 .00039 4.064 .16 9.4 .37008 14.8 .58268 20.1 .79134

.025 .001 4.1 .16142 9.5 .37402 14.9 .58661 20.2 .76527.02 .00078 4.2 .16535 3/8 9.525 .375 14.986 .59 51/64 20.2406 .79688.03 .00118 4.3 .16929 9.6 .37795 15.0 .59055 20.3 .79921.04 .00157 4.318 .17 9.652 .38 19/32 15.0812 .59375 20.320 .80.05 .00197 11/64 4.3656 .17188 9.7 .38189 15.1 .59449 20.4 .80315

.051 .002 4.4 .17323 9.8 .38583 15.2 .59842 20.5 .80709.06 .00236 4.5 .17717 9.9 .38976 15.24 .60 20.574 .81

.0635 .0025 4.572 .18 9.906 .39 15.3 .60236 20.6 .81102.07 .00276 4.6 .18110 25/64 9.9219 .39063 15.4 .60630 13/16 20.6375 .81250

.075 .00295 4.7 .18504 10.0 .39370 39/64 15.4781 .60938 20.7 .81496.0762 .003 3/16 4.7625 .1875 10.1 .39764 15.494 .61 20.8 .81890.08 .00315 4.8 .18898 10.16 .40 15.5 .61024 20.828 .82.09 .00354 4.826 .19 1.02 .40157 15.6 .61417 20.9 .82283.1 .00394 4.9 .19291 10.3 .40551 15.7 .61811 21.0 .82677

.1016 .004 5.0 .19685 13/32 10.3188 .40625 15.748 .62 53/64 21.0344 .82813

.1270 .005 5.08 .2 10.4 .40945 15.8 .62205 21.082 .83.2 .00787 5.1 .20079 10.414 .41 5/8 15.875 .625 21.1 .83071.25 .00984 13/64 5.1594 .20313 10.5 .41339 15.9 .62598 21.2 .83464

.254 .01 5.2 .20472 10.6 .41732 16.0 .62992 21.3 .83858.3 .01181 5.3 .20866 10.668 .42 16.002 .63 21.336 .84

1/64 .3969 .01563 5.334 .21 10.7 .42126 16.1 .63386 21.4 .84252.4 .01575 5.4 .21260 27/64 10.7156 .42188 16.2 .63779 27/32 21.4312 .84375.4 .01969 5.5 .21654 10.8 .42520 16.256 .94 21.5 .84646

.508 .02 7/32 5.5562 .21875 10.9 .42913 41/64 16.2719 .64063 21.590 .85.6 .02362 5.588 .22 10.992 .43 16.3 .64173 21.6 .85039

.635 .025 5.6 .22047 11.0 .43307 16.4 .64567 21.7 .85433.7 .02756 5.7 .22441 11.1 .43701 16.5 .64961 21.8 .85827.75 .0295 5.8 .22835 7/16 11.1125 .4375 16.510 .65 55/64 21.8281 .85938

.762 .03 5.842 .23 11.176 .44 16.6 .65354 21.844 .861/32 .7938 .03125 5.9 .23228 11.2 .44094 21/32 16.6688 65625 21.9 .86220

.8 .0315 15/64 5.9531 .23438 11.3 .44488 16.7 .65748 22.0 .86614

.9 .03543 6.0 .23622 11.4 .44882 16.764 .66 22.098 .871.0 .03937 6.096 .24 11.430 .45 16.8 .66142 22.1 .87008

1.016 .04 6.1 .24016 11.5 .45276 16.9 .66535 22.2 .874011.1 .04331 6.2 .24409 29/64 11.5094 .45313 17.0 .66929 7/8 22.225 .875

3/64 1.191 .04687 6.3 .24803 11.6 .45669 17.018 .67 22.3 .877951.2 .04724 1/4 6.35 .25 11.684 .46 43/64 17.0656 .67188 22.352 .88

1.25 .04921 6.4 .25197 11.7 .46063 17.1 .67323 22.4 .881891.27 .05 6.5 .25591 11.8 .46457 17.2 .67716 22.5 .885831.3 .05118 6.6 .25984 11.9 .46850 17.272 .68 22.6 .889761.4 .05512 6.604 .26 15/32 11.9062 .46875 17.3 .68110 22.606 .891.5 .05906 6.7 .26378 11.938 .47 17.4 .68504 57/64 22.6219 .89063

1.524 .06 17/64 6.7469 .26563 12.0 .47244 11/16 17.4625 .68750 22.7 .893701/16 1.5875 .0625 6.8 .26772 12.1 .47638 17.5 .68898 22.8 .89764

1.6 .06299 6.858 .27 12.192 .48 17.526 .69 22.860 .901.7 .06693 6.9 .27165 12.2 .48031 17.6 .69291 22.9 .90157

1.778 .07 7.0 .27559 12.3 .48425 17.7 .69685 23.0 .905511.8 .0787 7.1 .27953 31/64 12.3031 .48438 17.78 .70 29/32 23.0188 .906251.9 .07480 7.112 .28 12.4 .48819 17.8 .70079 23.1 .90945

1.905 .075 9/32 7.1438 .28125 12.446 .49 45/64 17.8594 .70313 23.114 .915/64 1.9844 .07813 7.2 .28346 12.5 .49213 17.9 .70472 23.2 .91338

2.0 .07874 7.3 .28740 12.6 .49606 18.0 .70866 23.3 .917322.032 .08 7.366 .29 1/2 12.7 .50 18.034 .71 23.368 .922.1 .08268 7.4 .29134 12.8 .50394 18.1 .71260 23.4 .921262.2 .08661 7.5 .29528 12.9 .50787 18.2 .71653 59/64 23.4156 .92188

2.25 .08858 19/64 7.5406 .29688 12.954 .51 23/32 18.2562 .71875 23.5 .925202.286 .09 7.6 .29921 13.0 .51181 18.288 .72 23.6 .929132.3 .09055 7.62 .30 33/64 13.0969 .51563 18.3 .72047 23.622 .93

3/32 2.3812 .09375 7.7 .30315 13.1 .51575 18.4 .72441 23.7 .933072.4 .09449 7.8 .30709 13.2 .519687 18.5 .72835 23.8 .937012.5 .09843 7.874 .31 13.208 .52 18.542 .73 15/16 23.8125 .93750

2.54 .1 7.9 .31102 13.3 .52632 18.6 .73228 23.876 .942.6 .10236 5/16 7.9375 .3125 13.4 .52756 47/64 18.6531 .73438 23.9 .940942.7 .10630 8.0 .31496 13.462 .53 18.7 .73622 24.0 .94488

2.75 .10827 8.1 .31890 17/32 13.4938 .53125 18.796 .74 24.1 .948827/64 2.7781 10937 8.128 .32 13.5 .53150 18.8 .74016 24.130 .95

2.794 .11 8.2 .32283 13.6 .53543 18.9 .74409 24.2 .952752.8 .11024 8.3 .32677 13.7 .53937 19.0 .74803 61/64 24.2094 .953133.1 .1205 8.5 .33465 13.9 .54724 19.3 .75984 24.5 ..96457

1/8 3.175 .125 8.6 .33858 13.970 .55 19.304 .76 24.6 .968503.2 .12598 8.636 .34 14.0 .55118 19.4 .76378 31/32 24.6062 .96875

3.25 .12796 8.7 .34252 14.1 .55512 49/64 19.4469 .76563 24.638 .973.3 .12992 11/32 8.7312 .34375 14.2 .55905 19.5 .76772 24.7 .97244

3.302 .13 8.8 .34646 14.224 .56 19.558 .77 24.8 .976383.4 .13386 8.89 .35 9/16 14.2875 .56250 19.6 .77165 24.892 .983.5 .13780 8.9 .35039 14.3 .56299 19.7 .77559 24.9 .98031

3.556 .14 9.0 .35433 14.4 .56693 19.8 .77953 25.0 .984259/64 3.5719 .14063 9.1 .34827 14.478 .57 19.812 .78 63/64 25.0031 .98438

3.6 .14173 23/64 9.1281 .35938 14.5 .57087 25/32 19.8438 .78125 25.1 .988193.7 .14567 9.144 .36 14.6 .57480 19.9 .78346 25.146 .993.8 .14961 9.2 .36220 37/64 14.6844 .57813 20.0 .78740 25.2 .99212

3.810 .15 9.3 .36614 14.7 .57874 25.3 .996063.9 .15354 1 25.40 1.00000

5/32 3.9688 .15625

DecimalEquivalents

Size Decimal Inches Size Decimal

Inches Size Decimal Inches Size Decimal

Inches Size Decimal Inches Size Decimal

Inches97 .0059 59 .0410 2.75mm .1083 5mm .1969 N .3020 13mm .511896 .0063 1.05mm .0413 7/64 .1094 8 .1990 7.7mm .3031 33/64 .515695 .0067 58 .0420 35 .1100 5.1mm .2008 7.75mm .3051 17/32 .531294 .0071 57 .0430 2.8mm .1102 7 .2010 7.8mm .3071 13.5mm .531593 .0075 1.1mm .0433 34 .1110 13/64 .2031 7.9mm .3110 35/64 .546992 .0079 1.15mm .0453 33 .1130 6 .2040 5/16 .3125 14mm .5512

.2mm .0079 56 .0465 2.9mm .1142 5.2mm .2047 8mm .3150 9/16 .562591 .0093 3/64 .0469 32 .1160 5 .2055 O .3160 14.5mm .570990 .0089 1.2mm .0472 3mm .1181 5.25mm .2067 8.1mm .3189 37/64 .5781

.22mm .0087 1.25mm .0492 31 .1200 5.3mm .2087 8.2mm .3228 15mm .590689 .0091 1.3mm .0512 3.1mm .1220 4 .2090 P .3230 19/32 .593888 .0095 55 .0520 1/8 .1250 5.4mm .2126 8.25mm .3248 39/64 .6094

.25mm .0098 1.35mm .0531 3.2mm .1260 3 .2130 8.3mm .3268 15.5mm .610287 .0100 54 .0550 3.25mm .1280 5.5mm .2165 21/64 .3281 5/8 .625086 .0105 1.4mm .0551 30 .1285 7/32 .2188 8.4mm .3307 16mm .629985 .0110 1.45mm .0571 3.3mm .1299 5.6mm .2205 Q .3320 41/64 .6406

.28mm .0110 1.5mm .0591 3.4mm .1339 2 .2210 8.5mm .3346 16.5mm .649684 .0115 53 .0595 29 .1360 5.7mm .2244 8.6mm .3386 21/32 .6562

.3mm .0118 1.55mm .0610 3.5mm .1378 5.75mm .2264 R .3390 17mm .669383 .0120 1/16 .0625 28 .1405 1 .2280 8.7mm .3425 43/64 .671982 .0125 1.6mm .0630 9/64 .1406 5.8mm .2283 11/32 .3438 11/16 .6875

.32mm .0126 52 .0635 3.6mm .1417 5.9mm .2323 8.75mm .3445 17.5mm .689081 .0130 1.65mm .0650 27 .1440 A .2340 8.8mm .3465 45/64 .703180 .0135 1.7mm .0669 3.7mm .1457 15/64 .2344 S .3480 18mm .7087

.35mm .0138 51 .0670 26 .1470 6mm .2362 8.9mm .3504 23/32 .718879 .0145 1.75mm .0689 3.75mm .1476 B .2380 9mm .3543 18.5mm .7283

1/64 .0156 50 .0700 25 .1495 6.1mm .2402 T .3580 47/64 .7344.4mm .0157 1.8mm .0709 3.8mm .1496 C .2420 9.1mm .3583 19mm .7480

78 .0160 1.85mm .0728 24 .1520 6.2mm .2441 23/64 .3594 3/4 .7500.45mm .0177 49 .0730 3.9mm .1535 D .2460 9.2mm .3622 49/64 .7656

77 .0180 1.9mm .0748 23 .1540 6.25mm .2461 9.25mm .3642 19.5mm .7677.5mm .0197 48 .0760 5/32 .1562 6.3mm .2480 9.3mm .3661 25/32 .7812

76 .0200 1.95mm .0768 22 .1570 E .2500 U .3680 20mm .787475 .0210 5/64 .0781 4mm .1575 1/4 .2500 9.4mm .3701 51/64 .7969

.55mm .0217 47 .0785 21 .1590 6.4mm .2520 9.5mm .3740 20.5mm .807174 .0225 2mm .0787 20 .1610 6.5mm .2559 3/8 .3750 13/16 .8125

.6mm .0236 2.05mm .0807 4.1mm .1614 F .2570 V .3770 21mm .826873 .0240 46 .0810 4.2mm .1654 6.6mm .2598 9.6mm .3780 53/64 .828172 .0250 45 ..0820 19 .1660 G .2610 9.7mm .3819 27/32 .8438

.65mm .0256 2.1mm .0827 4.25mm .1673 6.7mm .2638 9.75mm .3839 21.5mm .846571 .0260 2.15mm .0846 4.3mm .1693 17/64 .2656 9.8mm .3858 55/64 .8594

.7mm .0276 44 .0860 18 .1695 6.75mm .2657 W .3860 22mm .866170 .0280 2.2mm .0866 11/64 .1719 H .2660 9.9mm .3898 7/8 .875069 .0292 2.25mm .0886 17 .1730 6.8mm .2677 25/64 .3906 22.5mm .8858

.75mm .0295 43 .0890 4.4mm .1732 6.9mm .2717 10mm .3937 57/64 .890668 .0310 2.3mm .0906 16 .1770 I .2720 X .3970 23mm .9055

1/32 .0312 2.35mm .0925 4.5mm .1772 7mm .2756 Y .4040 29/32 .9062.8mm .0315 42 .0935 15 .1800 J .2770 13/32 .4062 59/64 .9219

67 .0320 3/32 .0938 4.6mm .1811 7.1mm .2795 Z .4130 23.5mm .925266 .0330 2.4mm .0945 14 .1820 K .2810 10.5mm .4134 15/16 .9375

.85mm .0335 41 .0960 13 .1850 9/32 .2812 27/64 .4219 24mm .944965 .0350 2.45mm .0965 4.7mm .1850 7.2mm .2835 11mm .4331 61/64 .9531

.9mm .0354 40 .0980 4.75mm .1870 7.25mm .2854 7/16 .4375 24.5mm .964664 .0360 2.5mm .0984 3/16 .1875 7.3mm .2874 11.5mm .4528 31/32 .968863 .0370 39 .0995 4.8mm .1890 L .2900 29/64 .4531 25mm .9843

.95mm .0374 38 .1015 12 .1890 7.4mm .2913 15/32 .4688 63/64 .984462 .0380 2.6mm .1024 11 .1910 M .2950 12mm .4724 1 .1.000061 .0390 37 .1040 4.9mm .1929 7.5mm .2953 31/64 .4844

1mm .0394 2.7mm .1063 10 .1935 19/64 .2969 12.5mm .492160 .0400 36 .1065 9 .1960 7.6mm .2992 1/2 .5000

millimeters x .039370 = inchesmeters x 39.370 = inchesmeters x 3.2808 = feetmeters x 1.09361 = yardskilometers x 3280.8 = feetkilometers x .62137 = statute mileskilometers x .53959 = nautical miles

grams x 981 = dynesgrams x 15.432 = grainsgrams x .03527 = ouncesgrams x .033818 = fluid ounceskilograms x 35.27 = ounceskilograms x 2.20462 = poundsmetric tons x 1.10231 = net tonmetric tons x .98421 = gross ton

sq. millimeters x .00155 = sq. inchessq. centimeters x .155 = sq. inchessq. meters x 10.76387 = sq. feetsq meters x 1.19599 = sq. yardshectares x 2.47104 = acressq. kilometers x 247.104 = acressq. kilometers x .3861 = sq. miles

cu. centimeters x .033818 = fluid ouncescu. centimeters x .061023 = cu. inchescu. centimeters x .271 = fluid dramsliters x 61.023 = cu. inchesliters x 1.05668 = quartsliters x .26417 = gallonsliters x .035317 = cu. feethectoliters x 26.417 = gallonshectoliters x 3.5317 = cu. feethectoliters x 2.83794 = bushelshectoliters x .1308 = cu. yardscu. meters x 264.17 = gallonscu. meters x 35.317 = cu. feetcu. meters x 1.308 = cu. yards

calorie x .003968 = BTUjoules x .7373 = foot poundskilogrammeters x 7.233 = foot poundscheval vapeur x .9863 = horsepowerkilowatts x 1.34 = horsepowerkilowatt hours x 3415 = BTU(°C x 1.8) + 32 = °F(°R x 2.25) = 32 = °F

Metric SystemMeasurements

and Conversions

inches x 25.4001 = millimetersinches x .0254 = metersfeet x .30480 = metersyards x .91440 = metersfeet x .0003048 = kilometersstatute miles x 1.60935 = kilometersnautical miles x 1.85325 = kilometers

dynes x .0010193 = gramsgrains x .0646 = gramsounces x 28.35 = gramsfluid ounces x 29.57 = gramsounces x .02835 = kilogramspounds x .45359 = kilogramsnet ton x .90719 = metric tonsgross ton x 1.01605 = metric tons

sq. inches x 645.163 = sq. millimeterssq. inches x 6.45163 = sq. centimeterssq. feet x .0929 = sq. meterssq. yards x .83613 = sq. metersacres x .40469 = hectaresacres x .0040469 = sq. kilometerssq. miles x 2.5899 = sq. kilometers

fluid ounces x 29.57 = cu. centimeterscu. inches x 16.387 = cu. centimetersfluid drams x 3.69 = cu. centimeterscu. inches x .016387 = litersquarts x .94636 = litersgallons x 3.78543 = literscu. feet x 28.316 = litersgallons x .0378543 = hectoliterscu. feet x .28316 = hectolitersbushels x .352379 = hectoliterscu. yards x 7.645 = hectolitersgallons x .00378543 = cu. meterscu. feet x .028316 = cu. meterscu. yards x .7645 = cu. meters

BTU x 252 = caloriesfoot pounds x 1.3563 = joulesfoot pounds x 1.3825 = kilogrammetershorsepower x 1.014 = cheval vapeurhorsepower x .746 = kilowattsBTU x .00029282 = kilowatt hours(°F - 32) x .555 = °C(°F - 32) x .444 = °R

Measures of Length10 millimeters (mm) = 1 centimeter (cm)10 centimeters = 1 decimeter (dm)10 decimeters = 1 meter (m)1000 meters = 1 kilometer (km)

Measures of Weight10 milligrams (mg) = 1 centigram (cg)10 centigrams = 1 decigram (dg)10 decigrams = 1 gram (g)10 grams = 1 decagram (Dg)10 decagrams = 1 hectogram (Hg)10 hectograms = 1 kilogram (Kg)1000 kilograms = 1 metric ton (T)

Surveyor's Square Measure100 square meters (m2) = 1 are (ar)10 ares = 1 hectare (har)100 hectares = 1 sq. kilometer (Km2)

Square Measure100 sq. millimeters (mm2) = 1 sq.

centimeter (cm2)100 sq. centimeters = 1 sq.

decimeter (dm2)100 sq. decimeters = 1 sq. meter m2)

Cubic Measure1000 cu. millimeters (mm3) = 1 cu.

centimeter (cm3)1000 cu. centimeters = 1 cu.

decimeter (dm3)1000 cu. decimeters = 1 cu. meter (m3)

Dry and Liquid Measure10 milliliters (ml) = 1 centiliter (cl)10 centiliters = 1 deciliter (dl)10 deciliters = 1 liter (l)100 liters = 1 cubic decimeter = the

volume of 1 kilogram of pure water at atemperature of 39.2 °F

Length Conversion Constants

Weight Conversion Constants

Area Conversion Constants

Volume Conversion Constants

Power and Heat Conversion Constants

The principal units are the meter for length, the liter for capacity and the gram for weight. The fol-lowing prefixes are used for sub-divisions and multiples:

Milli = 1/1000 Deci = 1/10 Hecto = 100Centi = 1/100 Deca = 10 Kilo = 1000

English Standard

Measurements

Long Measure1 mile = 1760 yards = 5280 feet1 yard = 3 feet = 36 inches1 foot = 12 inches

Surveyor's Measure1 mile = 8 furlongs = 80 chains1 furlong = 10 chains = 220 yards1 chain = 4 rods = 22 yards = 66 feet = 100 links1 link = 7.92 inches

Square Measure1 sq. mile = 640 acres = 6400 sq. chains1 acre = 10 sq. chains = 4840 sq. yards = 43,560 sq.

feet1 sq. chain = 16 sq. rods = 484 sq. yards = 4356 sq. feet1 sq. rod = 30.25 sq. yards = 275.25 sq. feet = 625 sq.

links1 sq. yard = 9 sq. feet1 sq. foot = 144 sq. inchesAn acre is equal to a square, the side of which is 208.7

feet.

Dry Measure1 bushel (US) = 1.2445 cu. feet = 2150.42 cu. inches1 bushel = 4 pecks = 32 quarts = 64 pints1 peck = 8 quarts = 16 pints1 quart = 2 pints1 heaped bushel = 1¼ struck bushel1 cu. foot = 0.8036 struck bushel1 bushel (British Imperial) = 8 Imperial gallons = 1.2837

cu. feet = 2218.19 cu. inches

Liquid Measure1 US gallon = 0.1337 cu. foot = 231 cu. inches = 4

quarts = 8 pints1 quart = 2 pints = 8 gills1 pint = 4 gills1 British Imperial gallon = 1.2003 US gallon = 277.27 cu.

inches1 cu. foot = 7.48 US gallons

Circular and Angular Measure60 seconds (") = I minutes (')60 minutes = 1 degree (°)360 degrees = 1 circumference (C)

Avoirdupois or Commercial Weight1 gross or long ton = 2240 pounds1 net or short ton = 2000 pounds1 pound = 16 ounces = 7000 grains1 ounce = 16 drams = 437.5 grains

Measures of Pressure1 pound per sq. inch = 144 pounds per sq. foot = 0.068

atmosphere = 2.042 inches of mercury at 62°F = 27.7inches of water at 62°F = 2.31 feet of water at 62°F

1 atmosphere = 30 inches of mercury at 62°F = 14.7pounds per sq. inch = 2116.3 pounds per sq. foot =33.95 feet of water at 62°F

1 foot of water at 62°F = 62.355 pounds per sq. foot =0.433 pound per sq. inch

1 inch of mercury at 62°F = 1.132 foot of water = 13.58inches of water = 0.491 pound per sq. inch

Column of water 12 inches high, 1 inch in diameter =.341 lbs.

Cubic Measure1 cu. yard = 27 cu. feet1 cu. foot = 1728 cu. inchesThe following measures are also used for wood and

masonry:1 cord of wood = 4 x 4 x 8 feet = 128 cu. feet1 perch of masonry = 16½ x 1½ x 1 foot = 24¾ cu. feet

Shipping MeasureFor measuring entire internal capacity of a vessel:

1 register ton = 100 cu. feetFor measurement of cargo:

1 US shipping ton = 40 cu. feet = 33.143 US bushels = 31.16 Imperial bushels

1 British shipping ton = 42 cu. feet = 33.75 US bushels = 32.72 Imperial bushels

Troy Weight, Used for Weighing Gold andSilver

1 pound = 12 ounces = 5760 grains1 ounce = 20 pennyweights = 480 grains1 pennyweight = 24 grains1 carat = 3.086 grains1 grain Troy = 1 grain avoirdupois = 1 grain apothe-

caries' weight

Measure Used for Diameters and Areas ofElectric Wires

1 circular inch = area of circle 1 inch in diameter =0.7854 sq. inch

1 circular inch = 1,000,000 circular mils1 sq. inch = 1.2732 circular inch = 1,273,239 circular milsA circular mil is the area of a circle 0.001 inch in diame-

ter

Board Measure1 foot board = 12 sq. inches x 1 inch = 144 cu. inches1 cu. foot = 12 feet board

AAABRASIVES Hose 77ADAPTERS, Hose 151-154ADJUSTABLE Clamps 123,141AIR

Couplings 114,115,129Hose 67-68, 84Nozzles 143,116Tool, Hose 69,116

ALIGNMENT Systems 35ALLIGATOR

Fasteners 29Lacing 29Staples 28

AMERICAN Couplings 132, 133APRON Seal Skirting 35AR Compound Belting 4ASGCO

Belt Cleaners 34Material Containment 35

BBBAND-IT

Bands 135-136Buckles 135-136Clamps 137-138Hose Menders 140Nipples 139-140Swivel Nipples 139Tools 134

BARBS, Hose 132-133BEARINGS 39BELT Cleaners 34BELT Lacing, Clipper 30-31BELTING

Fire/Oil-Resistant 8-9Fire-Retardant 8Food Handling 7, 16Grade II Compound 5, 8, 11-12Heavy Black Rubber 4, 11, 13Hot Material 3, 9-10Incline 3Oil Resistant 8PVC 2, 12, 15Special Lightweight 6, 15Transmission/Utility 6, 14-15Ultra Grain 5, 8-9, 11

BELTS

AR Compound 4Flat Belts 14General Material 8, 15Modular Belts 17Round Belts 15Specialty Belts 16Spindle Tapes 15Timing Belts 15, 21-23

BEST Conveyors 57BILTRITE Sheets 59-62BLASTING Hose 77BOLTS, Elevator 52BOSS

Clamps 112Couplings 110Hose Menders 111Male Stem 113

BRACKETS 49BRASS

Couplings 121Fittings 145-146Nozzles 121,125

BRYANT Rollers 50-57BUCKETS, Elevator 52-53BUTYL Sheets 60

CCCAM & GROOVE Fitting 109CCI Conveyor Pulleys 36-40CHAIN Belt Conveyor 58CHEMICAL Hose 81-82CHUTE Lining 63-64CLAMPS

Adjustable 123,141Band-It 137-138Boss, Hose 112Dixon 123Ideal 141Preformed 155

CLASSIFIER Shoes 64CLEANER, Belt 34CLEATS, Tatch-A-Cleat 32-33CLIPPER

Belt Lacers 30Belt Lacing 31

COIL, Air Hose 116CONTAINMENT System 35CONVEYOR Belting 2-7CONVEYOR Systems

Chain, Plastic 58Flexible/Expandable 57

Rubber CatalogIndex

Pre-Engineered 55-56COOPER Idlers 48-49COUPLERS

Hose 151-154Quick 114-116

COUPLINGSAir 114,116Boss, Hose 110Boss, Male 113Brass Short Shank 121Fire Hose 125FloMate 124Ground Joint 110Hansen 126-131King Short Shank 120Quick, Dixon 113, 115Parker 143-148Suction 120Washer Seal 111Water Hose 113

COVER Gauge Guide 9CRIMPING Machinery 149-150CUTTERS, Alligator 28

DDDISCHARGE Hose 90-91, 97DIXON

Clamps 112Hose Fittings 109-111, 113-116,

119-122, 124-125Quick Couplings 115

DRUM Pulleys 37DRY BULK Hose 74-76, 79, 94, 99, 108DURAVENT Flex Hose 94DUST Caps and Plugs 154DYNAVEYOR

Chains & Sprockets 58

EEELEVATOR

Belting 2-7Bolts 52Buckets 52-53

EXPANDING Conveyor 57EXPANSION Joints 142

FFFABRICATING, Rubber 1FASTENERS

Alligator 29Clipper 30-31Flexco 25-28

FENNER DUNLOP Belts 8-13FIRE

Couplings 125Hose 97Nozzles 125

FLARED Fittings 143,145FLAT Belts 14FLEXCO

Fasteners, Alligator 29Fasteners, Hinged 26Fasteners, Scallop 27Fasteners, Solid 25Fasteners, Staple 28Lacing, Alligator 29Lacing, Clipper 30-31 Tatch-A-Cleats 32-33Tools, Hand 27Tools, Power 28

FLEXIBLE Conveyor 57FLEXIBLE HOSE

Duravent 94-95Metal 108

FOG Nozzles 125FOOD

Belting, PVC 2Belting, Wh. Hycar 7, 16Hose, Handling 70, 78, 98-100Tubing, PVC 98-100

FRAMES, Takeup 39FURNACE Hose 78

GGGATES Hose 67-76GENERAL Mat’l Belts 8, 15GOODMAN Idlers 44GOODYEAR Hose 77-93GRADE II Belting 5, 8, 11-12GROUND JT. Coupling 110GUIDES, Tatch-A-Guide 33

Rubber CatalogIndex

Rubber CatalogIndex

HHHABASIT Belts 14-19HABASIT Belting 14-18HANSEN

Couplings 131Flow Sensor 130Plugs/Sockets 126-130

HAZARD Monitors 54HEAVY Blk Rb Belting 4, 11, 13HINGES, Flexco 26HI-TECH Hose 94-95HOLZ Pulley Lagging 41HOSE

Abrasives 77Air Drill 69, 84Blasting 77Chemical 81-82Dry Bulk 74-76, 79, 94, 99, 108Fire 97Flexible Metal 148Flexible 94-95Food 70, 78, 98-100Furnace 78Insecticide 69Multi-Purpose 66-67, 83-85, 94-95, 98-101Petroleum 79, 102-103Pressure Washing 86-87Steam 70, 80Vacuum 88, 98, 100Washdown 73, 89Water Discharge 90-91, 97Water Suction/Disch. 71-78, 92-93

HOSE MASTER Hose 108HOSE Menders 111, 140HOT Material Belting 3, 9-10HYDRAULIC Fittings 144, 147HYTROL Conveyors 55

IIIDEAL Clamps 141IDLERS

ASGCO 35Cooper 48-49Goodman 44Superior 45-47

IMPACT Beds 35INCLINE Belting 3INSECTICIDE Hose 69

JJJOINTS

Alligator 28Expansion 142Flexco 26

KKKURIYAMA Hose 98-101

LLLACERS, Clipper 30-31LACING, Alligator 29LAGGING, Pulley 39, 41LEVEL Monitors 54LIGHTWEIGHT Belting 6, 15LINERS, Mixer 65LININGS, Chute 63LOCK-ON Fittings 133LUBRICATORS

Wilkerson 117Series One 118

MMMATERIAL Containmt. 35MECTROL Timing Belts 21METAL Hose Fittings 147-148MIXER Liners 65MODULAR Belts 17MONITORS

Flow Sensor 130Level 54Hazard 54

NNNEOPRENE Sheet 59NIPPLES

Band-It 139-140Combination, Hose 119Dixon 125

NITRILE Sheet 60

Rubber CatalogIndex

NOZZLESAir 143Fog 125Safety 116Water 121, 125

NYLON Fittings 122, 145

PPPARKER

Brass Fittings 145-146Flared Fittings 145, 147General Purpose 143-144Hose 102-107Hydraulic Fittings 144, 147Metal Fittings 147-148Pipe Fittings 146, 148Pneumatic Fittings 143, 145Presto-Lok 145Machines 149-150

PETROLEUM Hose 79, 102-103PIPE Fittings 146, 148PLUGS

Dixon 124Hansen 126, 131

PNEUMATIC Fittings 143, 145POLYETHYLENE

Fittings 109Sheets 66

PRESSURE Wash Hose 86-87PT Adapters/Couplers 151-154PULLEYS

Drum 37Lagging 39, 41Wing 38

PUNCH-LOK Clamps 155PUNCHES, Belt 25-26PVC

Belting 2, 12, 15Tubing, Clear 98-100Tubing, Food 98-99

QQQUICK-CONNECT Fittings

One-Way 126-129Two-Way 130Straight-Through 131

RRRAWHIDE Hose 97RED Rubber Sheet 60RHINO Liners 63-65RIVETS, Flexco 27ROUND Belts 15RUBBER

Shaker Screen 43Skirting 35

RUBBER SHEETButyl 60Cloth Insert 61EPDM 62Neoprene 59Nitrile 60Red 60Rubber 61

SSSAFETY

Clips and Lanyards 114-116Nozzles 116

SERIES ONE Filters 117Lubricators 118Regulators 117

SERVICESBelt Fabricating 1Belt Splicing 1

SHAKER Screen 43SHEET Rubber

Butyl 60Cloth Insert 61EPDM 62Neoprene 59Nitrile 60Polyethylene 66Red 60Rubber 61

S.I.T. Timing Belts 22-23SKIRTING 35SPANNER Wrench 119, 125SOLIDUR Sheets 66SPECIALTY Belts 16SPLICING, Belting 1STAPLES, Alligator 28STEAM Hose 70, 80STRAINERS, Hose 119

Rubber CatalogIndex

SUCTION Hose 71-73, 92-93SUPERIOR Idlers 45-47SWIVEL Nipples 139

TTTAKE-UP Frames 39TAPES, Spindle 15TATCH-A-CLEATS 32-33TATCH-A-GUIDES 33TATCH-A-LUG 33TELETRACK

Roller Components 51Troughing Rollers 50

TIMING Belts 15, 21-23TOOLS

Alligator 28Band-It 134Belt Fasteners 25-27Belt Lacing 31Clamp Locking 155Crimping Machines 149-150V-Belts 29

TRANSMISSION Belts 6, 14-15TUBING, PVC 98-100

UUULTRA GRAIN Belting 5, 8-9, 11

VVV-BELT Fasteners 29VACUUM Hose 88, 98-99VERSA Conveyors 56

WWWASHDOWN Hose 73, 89WASHERS, Hose 114WATER

Hose 71-73, 90-91, 92-93, 97Hose Couplings 119Nozzles 121, 125

WING Pulley 38WRENCHES 119, 125

1

CONVEYOR BELTINGServices Offered

Equipment and CapabilitiesRichmond Supply's Rubber Division has a fully equipped and trained service department thatcan handle maintenance or repair for most any belting application we sell. We can performVULCANIZING, LACING and PULLEY LAGGING, either in our own shop, or at your place ofbusiness. No job is too big or too small! We've got all the equipment necessary, including:

SLITTERS84” Belt Slitter36” Rotary Slitter60” Light Weight Slitter

SKIVERSDrum SkiverHabasit Rotary Skiver

PRESSES48” Press96” Water Cooled Press24” Water Cooled Press4”–12” PressesShaw Almex Sectional Presses: 24” - 48” - 72” CapacityDG Rung Presses: 36” - 48” - 72” Capacity

SPECIAL EQUIPMENTPortable Belt Winder – 84” Wide – 10 ft DiameterLight Weight Belt WinderSelf Contained Trucks with generator & air for field vulcanizing

2

CONVEYOR BELTINGStock Specifications

PVC BeltingOur in-stock PVC belting features a solid woven single-ply construction of high-strength, low-stretch polyester yarn(such as Georgia Duck's PolyVinylok model). Fluid PVC is used for full impregnation of the carcass, which boastsexcellent lace-holding abilities and service life. It is a very economical choice, available in several configurations.

ABBREVIATIONSCOS - Cover, One Side CT - Chevron TopWHT - White SGRT - Super Grip RoughtopFS x FS - Friction x Friction CBS - Cover, Both SidesCR - Crescent Top RT x FS - Roughtop x Friction

PVC Incline PVC Smooth

RSC # Part # Thickness CoversWorkingTensionLBS PIW

Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

PVC INCLINE87105560 PVC 120 CR .23 CRESCENT

TOP 120 2 10° to 180°F .09 1 7 125

87105572 PVC 120CT11 .23 CHEVRON

TOP 120 2 10° to 180°F .09 1 7 125

87203199 PVC 120BLK RT .23 RT x FS 120 2 10° to 180°F .09 1 7 125

93601272 PVC 120GRN SGRT .23 SUPER GRIP

RT X FS 120 2 10° to 180°F .09 1 7 125

94001448 PVC 150UPS RT .25 RT x BB 150 2 1/2 10° to 180°F .10 2 15 125

94201572 PVC 150 RT X FS .25 RT x FS 150 2 1/2 10° to 180°F .10 2 15 125

94401572 PVC 200RED RT .31 RT x FS 200 4 10° to 180°F .12 3 27 187

PVC SMOOTH BELTS87103272 PVC 120

CBS .16 C x C 120 2 10° to 180°F .08 2 15 125

93001272 PVC 120COS .145 C x FS 120 2 10° to 180°F .08 2 15 125

94001272 PVC 120 FS x FS .120 FS x FS 120 2 10° to 180°F .06 1 7 125

94001572 PVC 150COS .175 C x FS 150 3 10° to 180°F .08 2 15 125

94001575 PVC 150CBS .19 C x C 150 3 10° to 180°F .10 2 15 125

94001580 PVC 150 FS x BB .135 FS x BRUSH 150 2 1/2 10° to 180°F .07 1 15 125

94102072 PVC 200COS .210 C x FS 200 6 10° to 180°F .12 4 1/2 25 R5

94602072 PVC 200CBS .23 C x C 200 6 10° to 180°F .14 4 1/2 25 R5

87105472 PVC 250COS .220 C x FS 250 6 10° to 180°F .14 4 1/2 27 R5

94802572 PVC 250CBS .250 C x C 250 7 10° to 180°F .15 5 27 R5

87106260 PVC 350COS .30 C x C 350 8 10° to 180°F .16 5 35 140

87106460 PVC 350COS .28 C x FS 350 8 10° to 180°F .16 5 35 R5

3

ABBREVIATIONSRT - Roughtop IMP - Impression TopBB - Bare Back FS - Friction SurfaceBLK - Black RBN - Red Brown NeopreneMCB - Meat Cleat Belt CARB - Carboxilated Nitrile


Incline BeltingIn today's industry, there is a need to save space, time and energy. To help you meet these objectives, we stock abroad selection of high traction belts. Not just for inclines, but also for feeders, spacers and brakes.

Hot Material BeltingMade of EPDM, a high-temperature compound that can withstand temperatures up to 400°F. It offers superior resist-ance to hardening and cracking within service temperatures.

Incline Belting


Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

RUBBER INCLINE93401260 PHR2-220

RT x BB GRAY .274 RT x BB 220 8 -20° to 225°F .089 2 15 125

92501072 2 PLY GUM RT .282 ROUGHTOP x FS 160 2 -5° to 200°F .092 1 7 125

97600272 2 PLY BLK RT x BB .282 ROUGHTOP x FS 150 2 -40° to 250°F .092 1 1 125

92502175 2 PLY CARBO x RT .280 RT x FS 160 2 0° to 200°F .092 1 7 125

97800360 3 PLY BLK RT x FS .3125 ROUGHTOP x FS 90 2 1/2 -40° to 250°F .118 1 7 125

97800372 3 PLY BLK RT x BB .29 RT x BB 225 5 -40° to 250°F .12 2 20 125

97800370 3 PLY BROWNNEOPRENE RT .250 ROUGH

TOP x FS 135 2 0° to 250°F .107 1 1 125

98200272 2 PLY TAN DIAMOND TOP .306 DIAMOND

TOP x BB 150 2.5 -40° to 250°F .108 1 1 125

92502175 PHR3-225 CARBOX RT-BB .29 RT x BB 225 8 -20° to 225°F .107 2 25 125

92502180 3 PLY BLUE CARBOXBLUE RT x FS .344 RT x FS 110 4 20° to 212°F .115 2 20 125


Min.PulleyDia.

Temp.Range

Weight1" x 12"

FlexcoLacing

HOT BELT

91502272PSR2-220

3/16 x 1/16 EPDMDELTA HEAT

.360 3/16 x 1/16 220 12 -40° to 400°F .1658 190

91503272PSR3-330

1/4 x 1/16 EPDMDELTA HEAT

.468 1/4 x 1/16 330 12 -40° to 400°F .24 170

4


Heavy Black RubberThis moderate oil-resistant belting is used to convey wood products, grains, fertilizers and other materials that mayhave an oil residue.

ABBREVIATIONSPL - Plylok MOR - Moderate Oil ResistantGR - Grade BB - Bare BackCL - Cleatlok

Heavy Black Rubber


Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

HEAVY RUBBER BELTS: MODERATE OIL COMPOUND91001605 WM2-220

3/32 x BB .221 3/32 x BB 220 10 -30° to 220°F .121 R5 375 140

92402272 PSR2-220 3/16 x BB MOR .298 3/16 x BB 220 10 -30° to 220°F .1442 R5 375 140

91302284 PSR2-220 1/8 x 3/64 MOR .282 1/8 x 3/64 220 10 -30° to 220°F .1359 R5 375 140

91803384 PSR3-330 3/16 x 1/16 MOR .408 3/16 x 1/16 330 12 -30° to 220°F .1959 R5 1/2 550 190


91803472 PSR3-375 3/16 x 1/16 MOR .415 3/16 x 1/16 375 10 -30° to 220°F .22


MODERATE OIL INCLINE92402270 PSR2-220

1/8 x 3/32 MOR CL .579 Cleat 1/8 x3/32 220 10 -30° to 220°F .1800 R5 375 190

92303372 PSR3-330 5/32 x 3/32 MOR CL .627 Cleat 5/32

x 3/32 330 12 -30° to 220°F .200 R5 1/2 550 190

AR CompoundThis high-quality grade II fire retardant compound is specifically designed to counter the negative effects of leachingagents as well as dust suppressants. It meets MSHA 2-G requirements, and has excellent abrasion and cover wearcharacteristics. It is recommended for power generation facilities and coal prep plants.


Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

P3-GUARDIAN AR COMPOUND91804000 PL4-440

5/32 x 3/32 .408 5/32 x 3/32 440 16 -30° to 225°F .21

5


Grade II Compound BeltingThis belt is recommended for most above-ground applications, especially aggregates, coal, ore, phosphates, salt, grav-el and other bulk materials.

ABBREVIATIONSPL - Plylok MOR - Moderate Oil ResistantGR - Grade BB - Bare BackCL - Cleatlok

Grade II Compound

Ultra Grain BeltingThis static-conductive belt is ideal whenever animal, mineral or vegetable fats are a deteriorating factor, or where com-bustion is a threat. It meets MSHA 2-G flame-retardant requirements and OSHA standards.


Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

GRAIN BELT92002284 PL2-220 1/16 x 1/16

Ultra Grain .235 1/16 x 1/16 220 10 -30° to 250°F .1242 R5 375 140

92003384 PL3-330 1/16 x 1/16Ultra Grain .283 1/16 x 1/16 330 12 -30° to 250°F .1458 R5 550 190

92203372 PL4-440 1/16 x 1/16Ultra Grain .343 1/16 x 1/16 440 16 -30° to 250°F .1733 R5 550 190


Min.PulleyDia.

Temp.Range

Weight1" x 12"

FlexcoLace

AlligatorLace

FlexcoLacing

COMPOUND GRANITE91202236 PSR2-220 Nylon

1/8 x 1/16 .365 3/16 x 1/16Capped Edges 220 12 -30° to 220°F .185 R5 375 190

91302286 PSR2-220 3/16 x 1/16 C.Gr. .365 3/16 x 1/16 220 12 -30° to 220°F .179 R5 375/550 190

92203384 PSR3-330 3/16 x 1/16 C. Gr. .408 3/16 x 1/16 330 12 -30° to 220°F .1967 R5 1/2 550 190

91803484 PSR3-375 1/4 x 1/16 C. Gr. .503 1/4 x 1/16 220 10 -30° to 220°F .2417 R6 550 190

91804000 PSR4-440 5/32 x 3/32 .408 5/32 x 3/32 440 16 -30° to 225°F .21

92204572 PSR4-440 1/4 x 1/16 C. Gr. .468 1/4 x 1/16 440 16 -30° to 220°F .2225 R6 #3E

92204480 PSRS4-800 3/8 x 3/32 .757 3/8 x 3/32 800 24 -30° to 220°F .3757 BR #3E

93301042 PSR3-600 3/8 x 3/32 C. Gr. .719 3/8 x 3/32 600 18 -30° to 220°F .3475 BR #30 #3E

6


Transmission/Utility BeltingOur transmission/utility belting (and its lightweight counterpart, below) feature a combination of traditional rubber stan-dards and new products that are made using the latest technology. The belts are proven performers in a wide range ofindustrial applications, and are known for their high quality and service versatility.

ABBREVIATIONSFBS - Friction Both Sides BARE - Bare FabricBB - Bare Both Sides FS - Friction Surface

Special Lightweight Belting

Transmission/Utility Special Lightweight


Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

TRANSMISSION & UTILITY98000372 3 PLY BLK TRANS .125 FS x FS 90 2 1/2 -40° to 250°F .054 1 15 125

96000372 3 PLY TAN TRANS .141 FS x FS 90 2 1/2 -40° to 250°F .064 2 15 125

96200472 4 PLY TAN TRANS .1875 FS x FS 120 3 -40° to 250°F .087 3 25 187

97000372 3 PLY R/B NEO-PRENE .0625 FS x FS 36 3/4 0° to 250°F .037 10 00 62

97200572 5 PLY R/B NEO-PRENE .1094 FS x FS 60 1 1/2 0° to 250°F .065 12 15 62

97400772 7 PLY R/B NEO-PRENE .156 FS x FS 84 3 0° to 250°F .094 2 20 125

96300072 HOT STOCK &WATER .014 BARE SHD

x FS 35 4 -20° to 250°F .06 2 15 125

RSC # Part # Thickness Covers

WorkingTensionLBS PIW

Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

SPECIAL LIGHTWEIGHT96000360 4 PLY SLIDER TOP .125 HARD WOVEN

NYLON 80 2 -20° to 250°F .07 1 15 125

98700472 2 PLY 60 CHECK OUT .075 COVER x FS 60 1 20° to 180°F .034 36 SP 1 SP

98700480 PRL2-50SP-DT x BB .075 MATT x BB 50 1 20° to 180°F .036 36

86607680 ULTIMATE 80 .100 TEXTILE xTEXTILE 80 1 100° to 250°F .03 36 1 62

94001372 POLYMATE 120 FBS .115 FS x FS 120 2 10° to 250°F .04 7 1 62

7


Food Handling BeltingWe offer several premium food handling products that feature both thermoplastic and rubber compounds, including tra-ditional styles that have been popular through the years in all aspects of the food processing industry.

ABBREVIATIONSCOS - Cover One Side PU - PolyurethaneRMV - Rubber Modified Vinyl FS - Friction Surface

Food Handling


Min.PulleyDia.

Temp.Range

Weight1" x 12"

ClipperLace

AlligatorLace

FlexcoLacing

PVC FOOD BELTS - PREMIUM OIL RESISTANT87405472 PVC 120W

C x MSK .145 C x MSK 120 1.5 10° to 180°F .08 2 15 125

93801472 PVC 150W C x MSK .165 C x MSK 150 3 10° to 180°F .09 2 15 125

94103072 PVC 200W C x MSK .21 C x MSK 200 4 10° to 180°F .12 4 25 R5

FOOD BELT96600272 RMV-2-100 .110 C x FS 100 1.5 20° to 180°F .058 1A 7 62

96800372 RMV-3-150 .141 C x FS 150 4 20° to 180°F .08 1 7 125

96900272 RMV 250 COS .25 C x FS 220 4 -30° to 180°F .124 5 35 R5

98700272 RMV 3 TY GRIP .187 C x FS 150 4 20° to 180°F .09 2 20 125

86602200 FMB-5EQ .05 C x FS 48 .6 -22° to 176°F .029 36 00

87402372 3 PLY WHITENITRILE .156 C X FS 135 4 20° to 212°F .082 2 25 125

8

Belting Compounds

General PurposeMatchless (RMA Grade I)• Superior endurance against combined cutting, gouging and heavy impact; good abrasion resistance• Recommended for transporting large, heavy lump ores, rocky earths, granite trap rock and quartz, even heavy logs

from the debarker• Superb for glass cullet handling and other types of sharp, abrasive material

Platinum (RMA Grade I)• Superior endurance against heavy, continuous abrasion; good resistance to cutting and gouging• Recommended for most above-ground abrasive material handling applications, such as aggregates, limestone, slag,

coal mine refuse or crushed ores and rock

Granite (RMA Grade II)• Excellent where heavy, continuous abrasion is the primary concern• Good resistance to cutting and gouging• Recommended for most above-ground material handling applications, such as aggregates, limestone, slag, coal mine

refuse or crushed ores and rock

Fire-RetardantMSHA-FAR• Meets US Mine Safety and Health Administration requirements per MSHA Title 30, Section 18.75• Excellent abrasion resistant cover compound for mining applications where MSHA specs are required• For underground applications

Guardian• Specifically designed to counter the negative effects of leaching agents as well as dust suppressants• Meets MSHA 2-G requirements• Increased resistance to abrasion and cover wear• Recommended for power facilities, coal prep plants

Guardian AR (RMA Grade II)• High quality Grade II fire retardant compound• Similar qualities to Guardian, but with excellent abrasion and cover wear characteristics

Fire & Oil RetardantUGH (Ultra Grain Handler)• Provides maximum oil resistance to the destructive effects of grain oils and oil-based dist suppressant activities.

Temperature range -30° to 200°F (-30° to 93°C)• Surpasses OSHA specs for static conductivity. Cover is also flame retardant per MSHA Title 30, Section 18.65• Designed for oil treated grain, crushed soybeans and other materials where fats are a deteriorating factor and where

combustion properties are a concern

9

Belting Compounds

Heat ResistantDeltaHeat• Premium hot material compound providing superb protection against prolonged exposure to high temperature pay-

loads and abrasive materials• Temperature resistant to 400°F (205°C) for abrasive coarse lumps, and 350°F (175°C) for abrasive fines• Designed to resist the negative effects of cover cracking, hardening, tearing and flexing in high-temp environments• Applications include hot cement clinker, iron ore pellets, casting sand and hot asphalt rock

Sahara• Provides good abrasion resistance in elevated operating temperature environments• Temperature resistant to 300°F (150°C) for abrasive coarse lumps, and 250°F (120°C) for abrasive fines• Ideal for hot dusty products and environments

Oil-ResistantMOR (Moderate Oil Resistant)• Recommended for specialized service such as wood chips, whole grains like corn and soybeans, waste disposal,

sewage, sludge and lightly oil treated materials• Resistant to the deteriorating effects of moderately oily materials and terpenes

ORP (Oil Resistance Plus)• Superior resistance to materials containing high concentrations of animal fats and oils• Recommended for use involving heavy exposure to aromatic hydrocarbons such as petroleum-based oily coke,

benzol and toluene

Specialty CompoundsNatural Tan Gum• Natural rubber compound for slow down conveyor applications in the wood products industry• Soft, non-marking, highly abrasive compound with a high coefficient of friction

Hot Service BeltingWhen service conditions consistentlyexceed 250°F and the belt does nothave adequate time to cool down, itis advisable to consider using a beltwith a working tension 25% higherthan what would normally be used ifheat were not present. This increasein belt strength is suggestedbecause conveyor belt textiles sub-jected to prolonged elevated temper-atures, without adequate cooling, willcause tensile degradation of the fab-ric, and premature belt failure.

RECOMMENDED COVER THICKNESSES

Class of Materials ExamplesMin. Top Cover Min. Bottom Cover

FavorableConditions

AdverseConditions

FavorableConditions

AdverseConditions

Light or Non-AbrasiveWood chips, pulp,grain, bituminouscoal, potash ore

1/16" 1/8" 1/16" 1/8"

Fine and Abrasive Sharp sand, clinker 1/8" 3/16" 1/16" 1/8"

Heavy, Crushed to 3" Sand, gravel, crushedstone 1/8" 3/16" 1/16" 1/8"

Heavy, Crushed to 8" Rom coal, rock, ore 3/16" 1/4" 1/16" 1/8"

Heavy, Large Lumps Hard ores, slag 1/4" 3/8" 1/16" 1/8"

UsFlex

UsFlex High Performance SeriesFenner Dunlop introduces a revolutionary new concept in straight-warp conveyorbelting: UsFlex. It has high strength and minimal stretch when conveying largeloads, excellent load support and outstanding troughability. Its longitudinal ripresistance and impact resistance far surpass those of conventional belts.

UsFlex’s straight-warp carcass construction creates a whole new level of durability.The lengthwise and crosswise belt strength is concentrated in parallel planes ofheavyweight, high-tenacity straight yarns which are then locked together. Each ofthese planes provides the reinforcing ettect of multiple conventional plies, with nocrimping to weaken the yarns and cause stretch. The carcass binder system actsas a built-in breaker to resist impact and puncture.

UsFlex also has a well-balanced cover ratio to prevent cupping, curling and tracking problems. This is accomplished byincorporating a top to bottom cover thickness ratio that insures correct troughability in the most stringent applications.

UsFlex is excellent for use in conveying many heavy-duty products, like hard rock, coal, impact minerals, ores, logs,aggregate and grain.

Plylok Supreme 125 Plylok Supreme 150 Plylok Supreme 200 Plylok Supreme 250 Plylok Supreme 3002-250 3-375 4-500 2-300 3-450 4-600 3-600 4-800 5-1000 3-750 4-1000 5-1250 3-900 4-1200 5-1500

No. of Plies 2 3 4 2 3 4 3 4 5 3 4 5 3 4 5

Working Str. PIW Mechanical 250 375 500 300 450 600 600 800 1,000 750 1,000 1,250 900 1,200 1,600

Vulcanized 250 375 500 330 500 660 660 880 1,100 825 1,100 1,375 990 1,320 1,630

Carcass Gauge - in. .130 .189 .251 .175 .220 .284 .245 .326 .413 .260 .355 .450 .308 .420 .532

Carcass Wt. - PIW .063 .089 .118 .083 .106 .128 .123 .155 .222 .130 .160 .200 .135 .183 .215

Imp. Rating (ft./lb.) 490 730 1,030 687 1,006 1,311 1,000 1,130 1,210 1,110 1,170 1,260 1,130 1,240 1,300

MIN. PULLEY DIAMETER

81-100% Tension 16" 18" 24" 16" 22" 28" 24" 30" 36" 30" 36" 42" 36" 42" 45"

61-80% Tension 14" 16" 20" 14" 18" 22" 20" 24" 30" 24" 30" 36" 30" 33" 39"

Up to 60% Tension 12" 14 18" 12" 16" 20" 18" 20" 26" 20" 24" 30" 26" 30" 33"

MAX. BELT WIDTH,Empty Troughing

20° 16" 24" 30" 18" 24" 36" 30" 36" 42" 36" 42" 48" 42" 48" 54"

35° 18" 24" 30" 24" 24" 36" 30" 36" 42" 36" 42" 48" 42" 48" 54"

45° 24" 30" 36" 30" 30" 42" 36" 42" 48" 42" 48" 54" 48" 54" 60"

MAX. BELT WIDTH for Load Support,

20° Idlers

0 - 40 lbs./ft. 54" 72" 84" 60" 72" 84" 84" 84" 84" 84" 84" 84" 84" 84" 84"

41 - 80 lbs./ft. 48" 60" 72" 54" 66" 72" 72" 84" 84" 72" 84" 84" 72" 84" 84"

81 - 120 lbs./ft. 42" 54" 72" 48" 60" 72" 72" 84" 84" 72" 84" 84" 72" 84" 84"

Over 120 lbs./ft. 36" 48" 60" 42" 54" 66" 60" 72" 84" 60" 72" 84" 60" 72" 84"


35° Idlers

0 - 40 lbs./ft. 48" 60" 72" 54" 66" 72" 72" 84" 84" 72" 84" 84" 72" 84" 84

41 - 80 lbs./ft. 42" 60" 60" 48" 60" 72" 60" 72" 84" 60" 72" 84" 72" 84" 84

81 - 120 lbs./ft. 42" 54" 60" 48" 54" 66" 60" 72" 84" 60" 72" 84" 72" 84" 84

Over 120 lbs./ft. 30" 42" 54" 36" 48" 60" 54" 60" 72" 54" 60" 84" 60" 72" 84


45° Idlers

0 - 40 lbs./ft. 48" 54" 72" 54" 60" 72" 72" 84" 84" 66" 84" 84" 66" 84" 84"

41 - 80 lbs./ft. 36" 48" 54" 42" 54" 66" 54" 72" 84" 54" 72" 84" 60" 84" 84"

81 - 120 lbs./ft. 30" 48" 54" 42" 48" 60" 54" 60" 72" 54" 60" 84" 60" 72" 84"

Over 120 lbs./ft. NR 36" 48" 30" 42" 54" 48" 54" 60" 48" 60" 72" 54" 72" 84"

Tension Rating(Fastener) Elevator Service 200 290 385 255 390 520 520 690 870 630 840 1,040 745 995 1,210

MIN. PULLEY DIAM-ETER

81 - 100% Tension 16" 18" 24" 18" 22" 30" 28" 36" 42" 32" 42" 48" 36" 45" 54"

61 - 80% Tension 14" 16" 22" 16" 20" 24" 24" 30" 36" 28" 36" 42" 30" 38" 48"

Up to 60% Tension 12" 14" 20" 14" 18" 20" 20" 24" 30" 22" 30" 36" 28" 33" 42"

Max. Bucket Proj. Spaced Industrial 7" 8" 11" 7" 9" 10" 10" 11" 12" 10" 12" 12" 11" 12" 12"

Continuous 6" 8" 11" 7" 9" 12" 12" 14" 16" 12" 14" 18" 13" 16" 18"

11

Plylok

PlylokPlylok is a premium plied rubber belt designed for tension ranges between 2-ply160 PIW to 4-ply 440 PIW. It can be used in a variety of applications, includingcoal, phosphate, ore, sand, salt, wood products and aggregate. It is an excellentchoice for conveying products with lower tension requirements.

Plylok's carcass can be ordered in a variety of constructions: all nylon,polyester/nylon or all polyester. Fenner Dunlop can skillfully match the carcassdesign and the carcass materials to the application intended. For example, nyloncarcasses are best in strong alkali atmospheres with high pHs, while polyesterworks best in acidic environments with low pHs. The proper carcass material inmany applications will determine total belt life.

Plylok covers can be furnished in a variety of materials:

PL2-220• 1/8" x 3/64" - GRA2 (designed for gener-al conveying), MOR (recommended forwood chips)• 3/16" x 1/16" - GRA2, MOR, OHR,EPDM

PL3-330• 3/16" x 1/16" - GRA2, MOR• 1/4" x 1/16" - GRA2

PL4-440• 1/4" x 1/16" - GRA2

Plylok 80 Plylok 1102-160 2-220 3-330 4-440

No. of Plies 2 2 3 4

Working Strength PIW Mechanical 160 220 330 440

Working Strength PIW Vulcanized 160 220 330 440

Carcass Gauge - in. .100 .115 .165 .225

Carcass Weight - PIW .050 .055 .078 .105

Impact Rating (ft./lb.) 335 460 665 875

MIN. PULLEY DIAMETER81-100% Tension 16" 16" 18" 24"

61-80% Tension 14" 14" 16" 20"

Up to 60% Tension 10" 10" 12" 16"

MAX. BELT WIDTH forEmpty Belt Troughing

20° 14" 16" 24" 30"

35° 18" 18" 24" 30"

45° NR 24" 30" 36"

MAX. BELT WIDTH forLoad Support, 20° Idlers

0 - 40 lbs./ft. 36" 48" 60" 72"

41 - 80 lbs./ft. 30" 42" 54" 60"

81 - 120 lbs./ft. 30" 36" 48" 60"

Over 120 lbs./ft. NR 30" 42" 54"


0 - 40 lbs./ft. 30" 42" 54" 60"

41 - 80 lbs./ft. 24" 36" 48" 54"

81 - 120 lbs./ft. 24" 36" 48" 54"

Over 120 lbs./ft. NR 24" 36" 48"


0 - 40 lbs./ft. 30" 42" 48" 60"

41 - 80 lbs./ft. 24" 30" 42" 48"

81 - 120 lbs./ft. NR 24" 36" 48"

Over 120 lbs./ft. NR NR 30" 42"

Tension Rating Elevator Service 140 190 280 370

MIN. PULLEY DIAMETER81 - 100% Tension 16" 16" 18" 24"

61 - 80% Tension 14" 14" 16" 20"

Up to 60% Tension 12" 12" 14" 18"

Max. Bucket Projection Spaced Industrial 6" 6" 7" 10"

Max. Bucket Projection Continuous Industrial NR 5" 7" 10"

12

PolyVinylok

PolyVinylokPolyVinylok is a propietary innovation of Fenner Dunlop, with an all-synthetic car-cass encased within a PVC compound, creating a solid bond of high-performancebelting. PolyVinylok is made from a unique solid woven fabric made of polyester fil-ament yarns (or spun polyester staple yarns), coupled in a highly complex con-struction. Spun polyester staple face yarns protect the top and bottom faces of thecarcass construction, and, when combined with high-performance PVC, form theworking surface of the belt itself. The yarns used are much thicker than conven-tional yarns, so PolyVinylok resists tearing and bolt pullout better than any otherconventional ply belt. Other benefits include:

No Ply Delamination/No Cover SeparationThe unique single-ply construction is totally saturated with(and encased in) a high-performance PVC elastomer.

Guaranteed Low Stretch

Superior Training PropertiesIt is dimensionally stable, yet flexible -- longitudinally forgood crown conformance, and transversely for all types oftroughing angles.

Moisture/Fungus Resistance

Superior Fastener/Bolt HoldingEven the lightweight construction is so strong that fasten-er failure will occur before the belt sustains damage. Inheavier constructions, elevator bolts have been known toshear under stress, with no damage to the belt!

Strength per Unit Weight RatioA lighter construction means less dead weight, which inturn saves money on installation, maintenance and repair.

Impact/Tear/Abrasion ResistanceThe PVC-encased polyester fibers have a much greaterresistance to impact, tear and abuse, and can absorbshocks that would destroy ordinary belting. The construc-tion also protects against sliding and cutting abrasion.

Chemical ResistanceThe construction also resists most chemicals, acids andoils. Environments which destroy ordinary belts can betolerated -- economically.

Release CharacteristicsThe unique polyester/PVC construction offers excellentrelease, minimal carry-back and easy cleanup.

Grab/Incline AbilitySurfaces with friction coefficients ranging from .20 to 1.5are available, as are specialized surfaces that take advan-tage of suction, texture and physical interlock.

Wide Temperature RangePolyVinylok performs well at temperatures ranging from0°F to 180°F on conveyors, and -20°F to 212°F on eleva-tors (depending on the pulley diameter).

Flame RetardantPolyVinylok belts (with the exception of certain food belts)are flame retardant, which is mandatory in services incoal, potash, salt and other underground mining. Theyeven meet the strict standards set by ASTM and ISO.

Static ConductiveThe engineered electrical conductivity is enough to safelydissipate any static build-up in most environments.

Meets FDA/USDA Standards

Quiet RunningNoise levels are usually within OSHA limits, depending oninstallation. Fenner Dunlop's unique Quiet Weave stylereduces noise levels even further.

Endless BeltsIt can be furnished endless, or spliced end-to-end on thejob with a simp le proven procedure. We'll even show youthe equipment you need and train you to do it yourself!

13

Rock Master - Wood Master

Rock Master - Wood MasterFenner Dunlop’s Rock Master and Wood Master lines have been engineered to bethe economical answer to a wide range of needs, but are different from other manu-facturers' "economy" lines. Both the Rock Master and Wood Master products willstretch less than 2% at full working tension, have full between-ply rubber gauges,and have fastener retention safety factors of 5 to 1. In addition, Rock Masterexceeds the Rubber Manufacturer's Associations rating for Grade 2 rubber com-pounds with 100+ minimum PICO abrasion resistance.

Rock Master is designed for general-purpose applications where material size is 4"or less, material drop is 3' or less and the idler troughing angle is 35 degrees orless. It works well with crushed stone, hard rock, sand gravel, ready mix, prepplants, power plants, cement, phosphate and recycling.

Wood Master is designed for the forest products industry handling lumber, bark and wood chips. It also performs wellwith sawdust, pulp belts, broke belts, tray belts, veneer belts and hog fuel.

2-220 3-330 3-330

3/16 x 3/16 3/16 x 1/16 1/4 x 1/16No. of Plies 2 3 4

Working Strength PIW Mechanical 220 330 440Working Strength PIW Vulcanized 220 330 440

Carcass Gauge - in. 0.100 0.145 0.194Carcass Weight - PIW 0.55 0.75 1.05

MIN. PULLEY DIAMETER81-100% Tension 16" 18" 24"61-80% Tension 14" 16" 20"

Up to 60% Tension 10" 12" 16"MIN. BELT WIDTH forEmpty Belt Troughing

20° 14" 20" 24"35° 18" 24" 30"


0 - 40 lbs./ft. 42" 60" 72"41 - 80 lbs./ft. 36" 54" 60"

81 - 120 lbs./ft. 30" 42" 54"


0 - 40 lbs./ft. 36" 54" 60"41 - 80 lbs./ft. 30" 48" 54"

81 - 120 lbs./ft. 24" 36" 48"

14

Power Transmission Belts

High Efficiency Flat BeltsHabasit's High Efficiency Flat Belts have a layered structure. The bottomelastomer friction layer transmits power between the belt and the pulley.A center polyamide or aramide traction layer absorbs the forces of thebelt when power is transmitted. The cover layer protects the reverse side,although some models feature a top elastomer layer in case of double-sided power tramsmission. Between each of these layers is a cushioningintermediate fabric layer. Habasit's flat belts guarantee an optimum ener-gy utilization rate with less slippage, a small bending cross-section andmaximum flexibility. The drive is maintenance-free and cost-effective, since the pulleys are virtually insensitive to wear.The belts are particularly quiet-running, since tension is spread so evenly across the entire belt width to reduce vibra-tion and flutter.

High Speed/High Efficiency Flat Belts (Armid TF-Series)The TF-Series was designed for light to moderate power transmission (uniform or variable operation; light to moderateinertia forces) and is suitable for either one-sided or double-sided power transmission. It features a traction layer thatconsists of an Aramide fabric encased in thermoplastic material, and has excellent abrasion resistance. It can be usedwith three-phase motors with low or moderate starting torque.

High Efficiency Flat Belts (F-Series)The F-Series was designed for light to moderate power transmission (uniform or variable operation; small, medium orconsiderable inertia forces; shock loads), and is only suitable for one-sided power transmission. It can be used withthree-phase motors with low or moderate starting torque, or with abrupt starting characteristics. The belt features aone-sided friction cover of NBR (Acrylonitrile Butadiene Rubber).

High Efficiency/High Duty Flat Belts (A-Series)The A-Series was designed for moderate to heavy power transmission (variable operation; considerable or great inertiaforces; heavy shock loads) and is only suitable for one-sided power transmission. It can be used with three-phasemotors with low starting torque, or with abrupt starting characteristics. The belt features a one-sided friction cover ofgrooved NBR (Acrylonitrile Butadiene Rubber).

High Efficiency/Leather Flat Belts (A-#LL, A-#LT Series)This series was designed for moderate to heavy power transmission (variable operation; considerable or great inertiaforces; heavy shock loads) and is only suitable for one-sided power transmission. It can be used with three-phasemotors with low starting torque, or with abrupt starting characteristics. The LL belt line features a double-sided leathersurface, while the LT line has a one-sided leather cover.

High Efficiency/Tangiential Flat Belts (S-Series)The S-Series was designed for light to moderate power transmission (uniform or variable operation; small or mediuminertia forces) and is only suitable for one-sided or double-sided power transmission. It can be used with three-phasemotors with low starting torque, or with abrupt starting characteristics. The belt features a double-sided friction cover ofNBR (Acrylonitrile Butadiene Rubber).

15

Power Transmission Belts

Polycord Round BeltsHabasit's Polycord Series is made of a very flexible high-qualitypolyurethane. They can be used as power transmission belts, for transmis-sion of motion and occasionally as V-Belt substitutes. Because of their highflexibility, they can act as security elements by reducing shocks and over-loads, and they are directionally adjustable as well. They are resistant towater, oiles, grease, benzine and ultra-violet radiation, and offer a limitedresistance to acids and alkaline solutions. These belts have been designedfor light power transmission and conveyance. Product Line: R-Belts.

Spindle TapesHabasit's Spindle Tapes are designed for high speed and elevated temper-atures, and work well wth spindle drives that have spindle braking, light-to-heavy cops, spindle clutch, ring spinning, open end spinning, twisting.Spindle tapes can also be used as thread carrier belts for circular knittingmachines. Most of the tapes feature a friction cover of NBR (AcrylonitrileButadiene Rubber), although the W-Series features a thermoplastic ure-thane cover, and the TS-10 model has a Polyamide fabric cover. ProductLine: W-#, TS-#, F-0, A-1 and S-140H.

Timing BeltsHabasit's Timing Belts are designed for light to moderate power transmission andgeneral conveying, particularly with high inertia forces and limited shock loading.They feature Flexproof joining capabilities. a finger splice technique that offers supe-rior performance and keeps you up and running with minimal downtime. These beltsare resistant to abrasion, oil, ultra-violet radiation and ozone, hydrolysis and aging.They are quiet-running, flexible, longitudinally stable, lightweight and virtually mainte-nance-free, and can operate at high speeds. The belts are available as endlesspolyurethane belts, with a nylon fabric special finish on the tooth side, reverse side,or both.

16

Conveyor Belting

Food Line BeltsHabasit's Food Belts are carefully designed to meet world-wide legal requirements, and to maintain product purity.They are made of polymeric plasticines (as opposed tomonomeric), so there is virtually no migration of the materi-als into the food product, which protects the flavor of yourfood product. In addition, the coating is resistant to chlorinat-ed cleaning, has good dough release properties, and ishighly resistant to fats and oils. This "Calendered PUR-coat-ing" is a smooth, even surface that is easily cleaned sothere's little chance of bacteria hiding anywhere. Besides itsfood-friendly cover, the belt itselt is well-designed for longitudinal flexibility and lateral stability, is permanently antistat-ic, and very durable and flexible.

Food Belts (FAB, FNB, FNT, FNI Series)These belts are made of premium compounds such as thermoplastic Polyurethane, for ultimate performance andlongest life of any belt.

Economy Food Belts (F2, F5, F8 Series)Constructed from premium compounds such as thermoplastic Polyurethane, these belts offer excellent performance,long life and great value.

General Material Handling BeltsHabasit's General Material Handling Belts are available in a wide range of surfaces andbelt strengths, to meet a wide range of application needs. They are lightweight, suitablefor high belt speeds and rapid acceleration, and abrasion, impact and wear-resistant.They are also dimensionally stable, so there is no need for retensioning after installation,and belt tracking is easier. Each of the belts also offers excellent longitudinal flexibility,which means lower energy consumption. Available styles include:

Standard Belts (SA-, SN-Series)This line of urethane cover belts provides slick surface and grip surface products for awide range of uses, especially those that do not require the added advantages of food-suitability or superior strength for extra loads.

CoNveyor Belts (N-Series)This is the economical choice for less-demanding applications. The line includes PVC belting for inclines, accumula-tion/diverting and food belting, and works well when chemical influences are minimal and loads are not excessive.

Allveyor Belts (B-### Series)This line of traditional PVC belts combines high strength and the good working conditions of a polyester carcass with alow-cost PVC cover.

Polymate, Ultimate, Trackmate, Rubber BeltsThese economical belts offer excellent performance, and unique non-woven constructions, such as PVC and rubber.

17

Conveyor Belting

Specialty Conveying BeltsHabasit's High Duty/Extraline Belts offer greater-than-average resistance to abrasion, mechanical stress, temperatureextremes and chemicals, because the covers are made of high-quality polyurethane and sophisticated elastomers.They have been designed for applications that operate at high speeds, convey large loads, or are subject to constantabrasion or chemical exposure. Product Lines: EA-, EN-, HA-, HN-Series.

Machine Tape BeltsThe high flexibility of Habasit's Machine Tapes allows for significantreverse bending strain, even on very small pulleys and rollers or highbending frequencies. The outer edges of the tapes are sealed toensure gentle handling of the conveyed goods. The covers are madeof Hamid plastomer or highly developed elastomers, so they don't soileasily (and are easy to clean if they do) and have an extreme resist-ance to abrasion. You can use Habasit's own Quickmelt joining tech-nique to install the tapes and be up and running in no time! ProductSeries: Hamid, PA, PES and SWC Series.

Folder/Gluer BeltsHabasit's Folder/Gluer Belts have many of the same characteristics as the Machine Tapebelts. They are also equipped with an electrically conductive layer that gives them excellentantistatic properties. It also keeps the conveyed goods from adhering and reduces the ten-dency to collect dirt. The revolutionary FlexFold line can save hours of downtime, since theycan be installed in as little as 20 minutes. Product Series: FlexFold, PA Series.

18

Modular Belting

HabasitLINK Modular BeltsHabasitLINK can be used in almost any application from direct food contact to packaging. All materials (polypropylene,polyethylene or acetal) are FDA-approved, allowing the use of various colors and materials to be selected for applica-tions where color contrast is critical or high abrasion resistance is required. The belts are assembled in a bricklayedpattern for strength and can be custom-made in virtually any length or width. They are also available with flights andsideguards as an integral part of the belt, and are secured with full-length plastic hinge rods. Each of the sprockets isinjection-molded in acetal and feature an open-window design for easy access. Smooth lines and radiused corners cir-tually eliminate areas where debris can be trapped. HabasitLINK belts are available in several styles:

M1220/M2520 Flat TopProvides a continuous, even surface for the stable conveying of all types of con-tainers in the packaging industry. The low co-efficient of friction between acetaland steel, aluminum or PET containers is an excellent choice for high-speedapplications where product back-up can occur.

M2530 Flush GridProvides increased airflow to improve cooling in the baking industry. Productdamage and orientation problems can be reduced through longer belt runs thatallow for fewer transfer points. The release characteristics of HabasitLINK plas-tics reduces product damage and waste from surface sticking.

M5030/32 Flush GridWell suited for a variety of applications in fruit and vegetable industries. The 37%- 34% open area promotes faster dewatering and the closed hinge design makesthe M5032 ideal whenever extreme abrasion resistance is required. Available ina full range of materials and colors.

M5010 Flat TopExceeds today's demanding sanitation and performance requirements in thepoultry and meat industry. The high impact and cut resistance guarantees dura-bility and long life in the most extreme applications. The M5010 offers improvedbelt sanitation with a unique hinge design that allows easier access to hinge rodsand module links.

19

Plastic Chains

HabaCHAIN Slat ChainsHabaCHAIN offers a first class product range to solve all mechanical or chemical resistance problems. Since everyindustry is unique and has special requirements, Habasit is able to offer the HabaCHAIN product range in a wide com-bination of materials to suit the ever increasing demands of challenging applications. These include extra low frictionmaterials, anti-static, metal detectable, flame retardant, and other state of the art developments to suit individualprocess requirements.

Slat Top StraightSuitable for straight conveying and accumulation of various products and con-tainers, such as light duty, bottling conveyor and palletizing areas.

Slat Top RadiusSuitable for radius and straight conveying of various products and containers, forgeneral light or medium duty conveyors.

Knuckle StraightSuitable for rectilinear crate conveying, used for end-line and heavy duty convey-ors.

Knuckle RadiusA tabbed heavy duty radius and straight running case conveyor chain.Applications include poultry conveyance and case conveyors.

Conveyor, Plastic PinSuitable for rectilinear and curvilinear conveying, used for end-line conveyors onaluminum modular structures. The patented retaining system makes it simple tojoin the chain with only a screwdriver. The surface has low friction which allowsaccumulation of products.

Conveyor, Steel PinSuitable for rectilinear and curvilinear use, in end-line applications on aluminummodular structure. The patented retaining system makes it simple to join thechain with only a screwdriver. The surface has low friction which allows accumu-lation of products.

Conveyor, Grip Top, Steel PinSuitable for inclined conveying. The abrasion resistant covers offer a better lifewith a constant friction coefficient. Ideal for medium duty conveyors. Differentrubbers are available.

Conveyor, Flight, Steel PinSuitable for rectilinear and curvilinear use, in end-line applications on aluminummodular structure. The patented retaining system makes it simple to join thechain with only a screwdriver. The surface has low friction which allows accumu-lation of products.

20

Modular Belting

Endless Procedure InstructionsSkivingAdjust the skiving angle corresponding to the belt (or tape) thickness(large tools only). Fix one belt end parallel at a distance of 0.04 in. infront of the skiving strip, clamp it, and skive by slow feed until a thinchamfer is obtained. Before the return feed, clean off the dust residueon or under the surface. Measure off the net length (L) from point A ofthe skived surface (picture 1), draw a line squarely across the belt atmeasuring point B and cut. Skive this end, on the opposite side. Cleanoff the dust residue on both skived surfaces and protect them from dirt(cleaning with trichlorethylene if necessary). NOTE: If you have tangi-ential drives or high speed machines, you must make angled joints(picture 2), using the same procedure described above.

JoiningAdjust the heating temperature to suit the type of belt of tape to be bonded. Preheat the press for 5 to 15 minutes(depending on model). Fix the belt (or tape) ends with adhesive outside the heating press, then squarely place one ontop of the other in the heating press. Make sure the rubber press pad is in place before closing the press. Close thepress and wait the prescribed length of pressing time. Open the heating press, remove any excess adhesive if neces-sary, and smooth the joint with emery paper.

CoolingThe required cooling time depends mainly on the thickness of the belt. The belt should be at room temperature throughits thickness before placing it in operation or applying tension. If necessary, cooling time can be accelerated on thickertype belts by using cold wet cloths, cold water or crushed ice.

Bonding SolutionsFixol - Use on one solution nylon types and on nylon on two solution types.Vulcol - Use for cementing rubber only on rubber covers of nylon types.Polycol Regular Type - Use on polyester types other than SAB/SNB or FNB/FAB.Polycol HR Type - Use on SAB/SNB polyester type.Polycol F Type - Use on FNB/FAB polyester type belting only.

Press time for all polyester types is based on presses set at 250° F. Press time for all nylon types is based on pressesset at 212° - 250°F. All solutions MUST be allowed to dry as specified.

21

Wide Timing BeltsMectrol's extra wide belts open up a whole new world of potential applications. Youcan use a synchronous belt in applications up to 18 inches wide, allowing placement ofa typical flat belt where synchronization is desireable. Their polyurethane body is idealfor timing belts being used as conveying belts, since it offers excellent abrasion resist-ance. Urethane is also resistant to most chemicals, water and oil, making it also well-suited for tough industrial applications. Urethane is an ideal material for custom fabri-cation, since the surfaces can be ground to tight tolerances, profiles can easily be ther-mally bonded, backings can be added and holes can be punched.

This extra-wide belt is available in compounds that are FDA/USDA approved, andhave a sealed edge with no exposed cord where bacteria can grow. Instead, the cordis located in the belt parallel to the belt edges and exactly perpendicular to the beltteeth. This means the belts will exert little or no side force, making them much easierto track, and there are no exposed cords at the edge that can fray and contaminatethe product.

Wide Timing Belts

(left) Mectrol is a leading manufacturer ofurethane timing belts for synchronized con-veying and linear positioning.

BELT SECTION XL L H H-HF H-XW XH T5 AT5 ATL5 T10 T10-HF T10-XW AT10 ATL10 T20 AT20 HTD5 HTD8 STD5 STD8 F8 F12

Pitch (inch and metric) .200" .375" .500" .500" .500" .875" 5mm 5mm 5mm 10mm 10mm 10mm 10mm 10mm 20mm 20mm 5mm 8mm 5mm 8mm N/A N/A

Ultimate TensileStrength

per inch or 25mmbelt width

Steellb/in 730 1340 1500 2300 N/A 3020 730 1450 2300 1500 2300 N/A 3020 5160 3020 5160 2300 3020 2300 3020 1500 1500

N/25mm 3250 5965 6675 10235 N/A 13435 3250 6450 10235 6675 10235 N/A 13435 22955 13435 22955 10235 13435 10235 13435 6675 6675

Kevlarlb/in 1370 2140 1830 N/A 830 N/A 1370 N/A N/A 1830 N/A 830 N/A N/A N/A N/A N/A N/A N/A N/A 1830 1830

N/25mm 6095 9520 8145 N/A 3695 N/A 6095 N/A N/A 8145 N/A 3695 N/A N/A N/A N/A N/A N/A N/A N/A 8145 8145

Max allowable belttension

(T1all) per inch or25mm belt width

Steeland

Kevlar

OpenEnded

lb/in 185 335 375 575 N/A 755 185 365 575 375 575 N/A 755 1290 755 1290 575 755 575 755 375 375

N/25mm 825 1495 1670 2560 N/A 3360 825 1625 2560 1670 2560 N/A 3360 5740 3360 5740 2560 3360 2560 3360 1670 1670

Weldedlb/in 140 200 245 290 115 380 140 225 N/A 245 290 115 380 N/A 380 645 290 380 290 380 245 245

N/25mm 625 890 1090 1290 515 1695 625 1005 N/A 1090 1290 515 1695 N/A 1695 2870 1290 1695 1290 1695 1090 1090

Allowable effectivetension

for the belt teethTeall (15 and more

Open Endedlb/in 180 360 440 440 N/A 880 200 290 290 380 380 N/A 585 585 715 1220 230 425 220 410 N/A N/A

N/25mm 790 1580 1930 1930 N/A 3855 880 1270 1270 1665 1665 N/A 2565 2565 3135 5345 1010 1865 965 1800 N/A N/A

Weldedlb/in 135 270 330 330 330 660 150 220 N/A 285 285 285 440 N/A 535 915 160 270 155 255 N/A N/A

N/25mm 595 1185 1445 1445 1445 2890 660 965 N/A 1250 1250 1250 1930 N/A 2345 4010 705 1185 680 1120 N/A N/A

Specific beltweight wb

Steellb/ft2 N/A 2.15 0.67 0.885 N/A 1.51 2.04 0.785 1.02 0.775 0.64 0.92

N/m2 20.7 34.6 38 41.4 N/A 103 21 32.1 42.4 45.8 N/A 55.1 54.2 72.3 97.7 37.6 48.9 43.8 30.7 44.1

Kevlarlb/ft2 0.39 0.62 0.68 N/A 0.67 N/A N/A N/A N/A N/A 0.76 N/A N/A N/A N/A N/A N/A N/A

N/m2 18.7 29.7 32.6 N/A 32.1 N/A 20 N/A N/A 37 N/A N/A 36.4 N/A N/A N/A N/A N/A N/A N/A 24.5

Specific belt stiff-ness csp

Steellb/in 47950 92800 89950 133600 N/A 213600 47950 100500 133600 89950 133600 N/A 213600 334600 213600 334600 133600 213600 133600 213600 89950 89950

N/mm 8400 16255 15755 23400 N/A 37410 8400 17605 23400 15755 23400 N/A 37410 58600 37410 58600 23400 37410 23400 37410 15755 15755

Kevlarlb/in 52250 71950 60700 N/A N/A N/A 52250 N/A N/A 60700 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 60700 60700

N/mm 9155 12605 10635 N/A N/A N/A 9155 N/A N/A 10635 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 10635 10635

Minimum No. of pulley teeth zmin 10 10 14 12 14 18 10 12 10 12 12 12 15 25 15 18 10 16 10 16 2.0" 2.0"

Minimum diameter of tensioningidler

running on back of belt

in 1.125 2.375 3.125 2.375 2.375 5.875 1.125 2.375 2.375 2.375 2.375 3.125 4.75 5.875 4.75 7.125 2.375 4.75 2.375 4.75 3.125 3.125

mm 30 60 80 60 60 150 30 60 60 60 60 80 120 150 120 180 60 120 60 120 80 80

Available in FDA/USDA construction (FDA/USDA 85 shore A Urethane.) Y Y Y - Y - Y - - Y - Y - - - - - - - - Y Y

Stock Colors (C=clear, W=white) C C C C C,W C C W W C C C,W W W C W W W W W C C

22

Polyurethane Timing Belts

Belts with BackingsThe unique chemical and mechanical characteristics of S.I.T.’sElatech belts, together with the possibility of a wide variety ofbackings in different materials, make them ideal for all convey-ing applications where synchronization is required. We offerbelts with polyurethane foam, PVC, natural rubber and fluoro-elastomer backings, and many other cover materials are avail-able upon request.

Polyurethane Foam Backings

Polyurethane foams are easily compressible according tothe cellular structure of the material. Due to this maincharacteristic, common applications include labellingequipment, light and/or fragile materials conveying, glassand paper industry and vacuum conveyors.

Style: PU YellowMaterial: PolyurethaneColor: YellowHardness: 55 Sh AStandard thickness: 2, 3, 4, 5 mmMin. pulley diameter: 60, 60, 80, 100 mmMax. working temp: 60°CMech. characteristics: Good wear resistanceChemical properties: Moderate resistance to oils

and greases

PVC Backings

PVC has a high coefficient of friction and a good resist-ance to acids. Due to its versatility, it is used in manyapplications in the paper, glass, ceramic industry andlabelling and packing equipment. Its FDA quality allowsthe application in food industry processes.

Style: SupergripMaterial: PVCColor: Green/BlueHardness: ca. 30 Sh AStandard thickness: 4 mmMin. pulley diameter: 60 mmMax. working temp: 60°CMech. characteristics: High coeffiecient of frictionChemical properties: Good resistance to oils and

greases

Specialty Backings

Style: VitonMaterial: FluoroelastomerColor: BlackHardness: ca. 75 Sh AStandard thickness: 2, 4, 5, 6 mmMin. pulley diameter: 80, 100, 110, 120 mmMax. working temp: 250°CMech. characteristics: High temperature resistanceChemical properties: Good resistance to oils and

greases

23

Belts with Backings, cont.

Polyurethane Timing Belts

Rubber Backings

Many different rubber backings in both synthetic and natural rubber are available. Due to rubber’s high friction coeffi-cient and high temperature resistance, Elatech polyurethane belts with rubber backings can be used in many differentconveying applications, such as the paper industry, ceramic industry, wood processing industry, glass industry andlabelling and packaging machines.

Style: LinatexMaterial: Natural RubberColor: RedHardness: ca. 38 Sh AStandard thickness: 1.6, 2.4, 3.2, 4.8, 6.4, 10 mmMin. pulley diameter: 30, 30, 40, 40, 40, 60 mmMax. working temp: 60°CMech. characteristics: High coefficient of friction, very good resistance to cuts and tearsChemical properties: Good resistance to oils

Style: IsogumMaterial: Natural RubberColor: RedHardness: ca. 40 Sh AStandard thickness: 2, 3, 4, 6, 10, 12 mmMin. pulley diameter: 30, 30, 30, 40, 80, 100 mmMax. working temp: 60°CMech. characteristics: Truly endless backing which guarantees long belt life. High coefficient of friction, very good

resistance to cuts and tearsChemical properties: Good resistance to oils

24

Belt Splicing Solutions

Mechanical FastenersAround the world, the most respected name in belt conveyor solutions is Flexco. Flexco's belt splicing products haveearned a reputation for quality and performance in the most demanding material handling applications on earth. Theirfasteners set the industry's highest standards for design, ease of use and reliability, and the knowledgeable advice andproven solutions that keep efficiency high and operational costs low.

Mechanical belt fasteners simplify conveyor belt maintenance. They can be installed faster and easier than vulcanizedsplices, resulting in less downtime and increased productivity. In addition, they can be installed by your own mainte-nance crew, eliminating the need to rely on outside contractors. Fasteners work well when take-up capacity is exhaust-ed on high-stretch belts, or when belts require frequent length alterations. They also work well for applications requiringfrequent belt removal for cleaning, as well as for conveyors that are not easily disassembled for belt installation. Flexcooffers solutions for heavy-duty applications (coal, mining, aggregate, steel mills, wood processing) as well as light-dutyapplications (package & baggage handling, assembly lines, food processing, checkout counters, agricultural equip-ment). Flexco's fasteners are available in a wide variety of styles and materials, some of which are described in greaterdetail on the pages that follow.

Fastener StylesHeavy-Duty Applications -- Flexco Bolt Solid Plate, Flexco Rivet Solid Plate, Flexco Bolt Hinged, Flexco R2, Flexco Rivet Hinged.Underground Mining Applications -- Flexco R2, Flexco Rivet Hinged,Flexco F-Series.Light-Duty Applications -- Alligator Staple, Alligator Lacing, Alligator Rivet,Alligator Plastic Rivet, Alligator Spiral Lace, Clipper Wire Hooks.

Fastener MetalsSteel -- helps combat mild corrosionRustAlloy -- resists corrosion due to mine water or other chemicalsPromal -- abrasion resistance in corrosive environmentsEverdur -- copper and silicon alloy that is spark-free but fully non-magneticMegAlloy -- resists wear and abrasion (but not impact or corrosion)Stainless Steel -- 300 series, resistant to abrasion, magnetism and corrosion.

Clipper Wire Hook Hinge Pin MaterialsNylosteelNylostainlessNylon-covered cableCold-rolled steelStainless steelDuralinkDuraStainlessNylon Plus

How to specify the rightFlexco Fastener

1. Determine belt tension. What isthe recommended mechanicalfastener rating?

2. Measure belt thickness. If it isto be countersunk, measure thebelt thickness after a portion ofthe cover has been removed.

3. Measure the diameter of thesmallest pulley in your drive.For tail or take-up of the self-cleaning "wing" type pulley, 25%large diameters are generallyrequired. Only consider pulleysover which the belt makes atleast a 90° wrap.

4. Hinged or solid plate? Wheneither style is appropriate, solidplate styles are preferred forlonger life and to prevent sifting.Hinged fasteners are preferredwith portable conveyors or small-er pulley diameters.

Flexco and Alligator Hinge Pin MaterialsNylon-covered steel cableNylon-covered stainless steel cableNylon-covered armored cableBare steel cableBare stainless steel cableBare armored cableBare armored stainless steel cableNylon-covered bronze cableSteel spring wireStainless steel spring wireCorrugatedRocker

25

Bolt Solid Plate FastenersFlexco's Bolt Solid Plate fasteners are engineered to meet the demands of the toughestmaterial-handling applications. They can be applied to belts mechanically rated up to 620PIW (105 kN/m) and are commonly used for highly abrasive materials such as sand, grav-el and crushed stone, as well as coal, cement and salt. The fasteners provide a strong,sift-free splice with superior holding ability. The strength of this fastener is derived from thecompression of the plates mounted above and below the belts, with high tensile strengthbolts. The bolts compress top and bottom plates to distribute splice tension evenly acrossthe entire width of each fastener plate. For added strength and pull-out resistance, special-ly formed teeth penetrate deep into the belt carcass, without damaging the fibers.

The fasteners can be applied in several differ-ent ways, including a 90° splice pattern, 45°splice pattern, as recessed bolts, as a Wedlokhigh-tension splice, and as rip repairs. Theyare packaged in two different styles, as an "E"Box (25 sets) or as a "C" Bucket (100 sets,preassembled bottom plates). Extra pilotedbolts or nuts are also available.

Heavy Duty Fasteners

Installation ToolsThe only tools needed for Bolt Solid Plate fastener installations are a template andportable hand or power tools such as wrenches and belt punches. Impact wrench-driven power tools are recommended since they can speed installation time by atleast 50%.

Bolt Solid PlateFasteners on the Job

FastenerSize

Belt Thickness Range

For Belts withMechanical

Fastener RatingsUp To:

RecommendedMin. PulleyDiameter

in mm P.I.W. kN/m in mm1 3/16 - 7/16 5 - 11 150 30 12 300

140 3/16 - 7/16 5 - 11 225 40 14 350190 5/16 - 9/16 8 - 14 330 60 18 450

1-1/2 7/16 - 11/16 11 - 17 300 50 18 4502 9/16 - 13/16 14 - 21 440 75 30 750

2-1/4 9/16 - 1-3/16 14 - 30 620 105 36 9002-1/2 3/4 - 1 19 - 25 450 75 42 1050

3 15/16 and up 24 and up 560 100 48 1200

Description For Fastener Number Mfg. No. RSC No.

Bolt Horn -- 2BH 83907380

Punch1, 140, 190, RP1 P1P 83907101

1-1/2, 2, 2-1/4, RP2 P2P 839071022-1/3, 3 P3P 83907103

Boring Bit1, 140, 190, RP1 B1B 83907201

1-1/2, 2, 2-1/4, RP2 B2B 839072022-1/2, 3 B3B 83907203

Wrench1, 140, 190, RP1 S1S 83907001

1-1/2, 2, 2-1/4, RP2 S2S 839070022-1/2, 3 S3S 83907003

Power Punch1, 140, 190, RP1 HP1 83907121

1-1/2, 2, 2-1/4, RP2 HP2 839071222-1/3, 3 HP3 83907123

Power Boring Bit1, 140, 190, RP1 HB1 83907221

1-1/2, 2, 2-1/4, RP2 HB2 839072222-1/2, 3 HB3 83907223

Power Wrench1, 140, 190, RP1 HW1

1-1/2, 2, 2-1/4, RP2 HW2 839070222-1/2, 3 HW3 83907023

Bolt Breaker1, 140, 190, RP1 110 83907310

1-1/2, 2, 2-1/4, RP2 112 839073122-1/2, 3 113 83907313

Quick Change Chuck -- 5552 83907352

26

Bolt Hinged FastenersFlexco's Bolt Hinged fasteners are engineered for belts operating over smaller pulleys -such as in construction equipment and road machinery. They are strong, dependable andeasy to install. Designed as a compression fastener, they are fastened to the belt endswith high tensile strength bolts. These compress the plates in the belt cover. Additionalholding capability is provided by the fastener teeth that imbed in the belt without damageto the belt carcass. Splice tension is therefore distributed across the entire plate width andthe fastener is anchored to resist pull-out. This construction makes the fasteners ideal forapplications that require frequent belt alterations, since the joint can be separated simplyby removing the hinge pin.

The fasteners are packaged in "J" Cartons, contain-ing one complete belt joint for belt widths rangingfrom 12" to 60". Strips, pins, tubing, washers andassorted nuts and bolts are included. Extra fasten-ers, bolts, nuts, tubing and pins are also availableseparately. Hinge pins are available in a variety ofcable materials:

AC - Bare ArmoredACS - Bare Armored Stainless SteelNAC - Nylon-Covered ArmoredNC - Nylon-Covered SteelNCS - Nylon-Covered Stainless SteelSC - Bare SteelSSC - Bare 300 Series Stainless SteelNB - Nylon-Covered Bronze.

For even tension distribution across theentire belt-width, belt cuts must be madein a concave shape. Alligator 400 SeriesCurved cutters and curved templates areavailable to help you achieve the precise-ly proper cuts for installation.

Installation ToolsThe only tools needed for Bolt Hinged fastener installations are a tem-plate and portable hand or power tools such as wrenches and belt punch-es. Impact wrench-drivenpower tools are recom-mended since they canspeed installation time byat least 50%.

Bolt Hinged Fastenerson the Job


FastenerSize

Belt ThicknessRange




in mm P.I.W. kN/m in mm375X 1/4 - 13/32 6 - 11 190 33 6 150550 1/4 - 5/8 6 - 16 300 52 9 225

Description For Fastener Number Mfg. No. RSC No.

Punch 375X, 550 P1P 83907101Boring Bit 375X, 550 B1B 83907201

Wrench - for Steel 375X, 550 100 83907010Wrench - for Stainless 375X, 550 S1S

Power Punch 375X, 550 HP1 83907001Power Boring Bit 375X, 550 HB1 83907123

Power Wrench - for Steel 375X, 550 H100 83907011Power Wrench - for Stainless 375X, 550 HW1 83907021

Bolt Breaker375X, 550 110 83907310375X, 550 112 83907312375X, 550 113 83907313

Quick Change Chuck 375X, 550 5552 83907352

27

SR Scalloped Edge FastenersFlexco's SR Scalloped Edge fasteners feature a low profile that significantly reduces thefastener's exposure to cleaner blades, skirt rubber and return idlers. This extends the lifeof the splice by reducing wear and tear, which maximizes belt availability and keeps pro-ductivity on a roll. The fasteners are designed for rubber plied and PVC solid woven belt-ing, and for worn belts unfit for vulcanized splices. The staggered rivet pattern providesmaximum holding ability by allowing the rivets to pass between carcass fibers withoutdamaging them.

The fasteners are shipped in packages of two fastener strips, for belt widths ranging from12" to 84". Extra rivets and pins are also available separately. Hinge pins are available in avariety of cable materials:

AC - Bare ArmoredACS - Bare Armored Stainless SteelNAC - Nylon-Covered ArmoredNC - Nylon-Covered SteelNCS - Nylon-Covered Stainless SteelSC - Bare SteelSSC - Bare 300 Series Stainless Steel.

INSTALLATION TOOLS

MSRT Multiple Rivet Driving ToolEasy-to-use portable tool that makes multiple rivet driving simple and fast. Itholds the belt, fastener strip and included guide blocks securely in place. Five riv-ets can be driven simultaneously, and you can install four fastener plates beforereloading. Includes two guide blocks, two drive rods, canvas bag, silicone sprayand two 4-lb. hammers. Available for belt widths from 30" to 84".

SRTA Single Rivet Driving ToolThis tool holds and positions the rivet to ensure safe driving of just one rivet at atime. Includes an anvil plate surface and the rivet driver. Available for belt widthsfrom 30" to 84".

R2T ToolThis economical 12" tool is lightweight and portable, ideal for quick repairs. Itcan install up to 12" of R2 fasteners in one pass, and can be repositioned forwider belts. Includes a 2-lb. hammer.

Scalloped Edge Fasteners on the Job


FastenerSize

Belt Thickness Range




in mm P.I.W. kN/m in mmR2 1/8 - 3/8 3 - 10 330 60 5 125R5 7/32 - 7/16 6 - 11 450 79 9 230

R5-1/2 5/16 - 19/32 8 - 15 650 114 12 300R6 13/32 - 11/16 10.5 - 17 800 140 18 450

RAR6LP 5/16 - 23/32 8 - 18 800 140 18 450

28

Light Duty Fasteners

Ready Set Staple FastenersFlexco's Alligator Ready Set Staple fasteners streamline installation and save you time! Theseone-piece fasteners arrive with staples pre-inserted in the top plate, so you never have to load adispenser or manually load individual staples into a tool. Just fit the strip onto the belt ends,secure them in the special installation tool, drive and finish-set for a strong, long-lasting splice.The Ready Set system offers the same advantages as traditional staple fasteners. High-tensilestainless steel staple fasteners are furnished in strips with a bridge between each fastener plate.The Ready Set staples provide a strong splice, resistance to impact damage, and a smooth,unrippled joint that makes hinge pin insertion easier. The staples work between carcass fiberswithout severing them as they are hammer-driven through, then clinched cross-wise to the belt.

The fasteners are available in steel or Type 316stainless steel, for belts ranging from 1/16" to 1/4"thick. Extra hinge pins and washers are availableseparately. Hinge pins are available in severalstyles:

NC - Nylon-Covered SteelNCS - Nylon-Covered Stainless SteelSP - Steel SpringSS - Stainless Steel Spring.

INSTALLATION TOOLS

RSC187 Multiple Staple Driving ToolThis tool accurately installs two staples simultaneously for quick, dependablesplice installation. Three different fasteners (RS62, RS125, RS187) are includedwith each tool, as well as guide blocks and a driver. The RSC187 Tool is avail-able in a variety of sizes, which allows varying amounts of belts to be laced atone position. Tools can be rapidly moved along the belt as you go along, also.

Staple KitsEverything you need to install, maintain and repair RS62, RS125 and RS187 staple belt splices. This kit includes aninstallation tool, staple set plate, hand skiver, belt marker, belt nippers and a 1-lb. hammer, all packaged in a spa-cious, durable metal box.

Alligator Hinge Pin CutterWith this hinge pin cutter, you can cut bulk cable quickly and easily, providing a clean cut with no frayed ends.

FastenerSize



Belt Thickness RangeRecommended

Min. PulleyDiameter

P.I.W. kN/m in mm in mmRS62 100 17 1/16 - 1/8 1.5 - 3.2 2 50

RS125 160 28 1/8 - 3/16 3.2 - 4.8 3 75RS187 200 35 3/16 - 1/4 4.8 - 6.4 4 102

29


Alligator Belt LacingFlexco's Alligator Conveyor Belt Lacing is made of a continuous fastener strip that provides a vise-like hold on the belt while distributing tension evenly across the entire belt width. In addition, thesolid strip aids hinge pin insertion and insures that there are no loose pieces that can detach fromthe belt and become loose in the conveyed product. The lacing is available in several sizes andmaterials to meet your specific environmental needs. A few hand tools are available to make instal-lation quicker and easier:

Rough-Top Belt Skiver - Simple to use, handheld tool for removing roughtop impressions prior tolacingBelt Nippers - Quick to use, helps notch the ends of belts to reduce belt hangups.

Alligator V-Belt FastenersFlexco's Alligator V-Belt Fasteners are designed for use on machinery with fractional andmultiple A-section V-Belt drives. They can be installed quickly to repair damaged conven-tional endless V-Belts, reducing your downtime. The fasteners are made of corrosion-resist-ant plated steel, which provide a strong, dependable splice.

Several tools are available to make installation quick and easy:

Holders - Holds the ends in proper alignment and act as a templateRocker Pin Tool - Inserts and locks pins within the loopsPiercing Tool - Prepierces to ensure a correct path as well as optimum clinchV-Belt Cutter - Easy, safe way to make square cutsTightener - Pulls the ends together after they are threaded, for easy insertion of pins and links.

LacingSize



Belt Thickness RangeRecommended

Min. PulleyDiameter

Approx.Corrugated Hinge

Pin DiameterStrip Length

P.I.W. kN/m in mm in mm in mm in mm0 25 4.3 up thru 1/16 up thru 1.6 1 25 3/64 1.2 6 1521 45 7.8 1/16 - 3/32 1.6 - 2.4 1-1/2 38 1/16 1.6 6 1527 50 3/32 - 9/64 2.4 - 3.6 2 51 1/16 1.6 6 152

15 65 11.4 1/8 - 5/32 3.2 - 4.0 2-1/2 64 3/32 2.4 12 30520 95 5/32 - 3/16 4.0 - 4.8 3 76 7/64 2.8 12 30525 100 17.5 3/16 - 7/32 4.8 - 5.6 4 102 1/8 3.2 12 30527 100 17.5 7/32 - 9/32 5.6 - 7.1 5 127 1/8 3.2 12 30535 150 26 9/32 - 5/16 7.1 - 7.9 7 178 9/64 3.6 12 30545 165 28 5/16 - 3/8 7.9 - 9.5 9 229 3/16 4.8 12 30555 175 30 3/8 - 7/16 9.5 - 11.1 12 305 13/64 5.2 12 30565 200 35 7/16 - 1/2 11.1 - 12.7 14 356 13/64 5.2 12 305

30


Clipper Wire Hook SystemFlexco's Clipper line of wire hooks offers many types of fasteners to meet your spe-cific needs. The hooks are available in a wide variety of diameters, leg and pointlengths, metals, strip lengths and styles to meet all your needs. Clipper Wire Hooksfeature a double-staggered grip pattern that offers an enormous amount of holdingpower without degrading the integrity of the belt carcass. The splices have a verylow profile, making them much more compatible with conveyor components. Theywork well for package and parts handling, food processing, general manufacturing,agriculture, laundry and filter media.

The fasteners are packaged in two different ways: Unibar fasteners are formed by welding each hook to a commonbar, while Carded fasteners are secured on carding paper for easier handling. In either case, the hooks are less likelyto get tangled in the box, they are quicker to install, and it is easier to create a flat, finished splice that doesn't "wave."

Clipper Wire Hooks can be made of a variety of metals:

• Galvanized Steel• Coated Steel/Steel• High Tensile Steel• Rectangular High Tensile Steel• 430 Stainless Steel• 316L Stainless Steel• Monel 400• Inconel 600• Phosphor Bronze• Hastelloy C-22• Black Oxide

Carded Clipper WireHook Lacing

Unibar Clipper WireHook Lacing

Connecting pins are also available in several materials:

• Nylosteel• Nylostainless• Nylon-Covered Cable• Durastainless• Nylon Plus• Duralink• Music Wire• Cold-Rolled Steel• Stainless Steel• Bare Stainless Cable.

31


Clipper Fastener Selection and Installation

INSTALLATION TOOLSVise LacerThe reliable Vise Lacer is the most economical method ofinstalling Clipper hooks. It fits onto any shop vise, and isideal for a job with few belts. Continuous lacing.

LW95 LacerThe LW95 Lacer is portable, and laces up to 6" of belt inone operation. Hook retainers are available for all hooksizes. Continuous lacing.

Min.Pulley Wire Diameter

Belt ThicknessUp to 3/64" 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 25/64"

Up to 1.2mm 1.6mm 2.4mm 3.2mm 4.0mm 4.8mm 5.6mm 6.4mm 7.1mm 7.9mm 9.0mm 10.0mm

15/16"24mm

.025"

.025" 25*.036" x .027" UCM36SL XSP.036" x .027" UCM36SL SP

.025" 25LP*

2"51mm

.036" x .027" UCM36 XSP.030" 30*

.036" x .027" UCM36 SP*

.036" x .027" 36 SP*.040" 1 XSP*.030" 30P*.040" UX 1 SP*

.036" x .027" UCM36*

.036" x .027" 36*.040" 1 SP*

.036" x .027" UCM36 SP*.040" 1*.040" UX 1*.047" UA2.054" U2 SP.054" U2.047" UA3

3" 76mm

.054" 2SP

.054" 2

3-1/2"89mm

.054" U3-1

.054" 3-1

.054" U3-2

.054" 3

.054" U3

.054" 3-4-1/2

4"102mm

.054" 4-2

.054" 4-1/2-3

.054" 4

.054" 4-1/2

5"127mm

.054" U4

.054" 5

.054" U56"

152mm.054" 6.054" U6

7"175mm

.054" 7

.054" U7

32

Tatch-a-Cleats

Bondable Tatch-a-CleatsFlexco's Tatch-A-Cleat line of bondable cleats allows belt fabricators to customize belts for specific conveying needs.Cleats can increase conveyor incline, without damaging product or causing roll-back, thus maximizing floor space.They can also accomodate special sorting needs, while V-Guides can help track belts. Bondable cleats are available inPVC and rubber (both FDA-approved compounds). PVC cleats are attached by a heat weld or chemical bond, whilerubber cleats are attached by a hot vulcanized or chemical bond process. Three types of cleats are available:

T-Cleats - White or black, available in 1/2", 3/4", 1", 1-1/2", 2", 1-1/2", 3" and 4" heightsScoop Cleats - White or black, available in 2" and 3" heights, PVC onlyV-Guides - White or black, available in notched (PVC only) or unnotched (sizes O, A, B, C).

Choosing Cleat PatternsWhen choosing cleat installation patterns, carefully consider the type of return support that is available or feasible.Where conveyor pulley center distances are 15 feet or less, it is often possible to omit return rolls safely. If the curvedor chevron patterns are used with standard return rolls, the cleats should be arranged so that there is continuous con-tact with the rolls. On drives using pulleys less than 6" in diameter, curved or chevron patterns should not be used. Theends of cleats mounted in a curved pattern should be tapered to lead smoothly onto return rolls.

Type CleatPattern Return Rolls Recommended

In TroughSplit Rolls

Where Cleats are needed only to lock material in place on the conveyor.

StaggeredSquirrel Cage

Where drain-off of liquids presents special problems.

Across Belt

WidthSelf-Cleaning

Where incline is steep and/or material has high flowability, as with large, round or

uniformly sized material.

CurvedStandard Return Rolls

Where increased load capacity is required with a given belt width, trough and incline.

SplitRubber Disc

Where drain-off is a problem, and rubber disc-type rolls are available.

ChevronStandard Return Rolls

Where drain-off is a problem, and standard solid return rolls are used.

33

Tatch-a-Cleats

Mechanically Attached Tatch-A-CleatsFlexco's Tatch-A-Cleat line of mechanically attached cleats, pegs, lugs and guidescan convert flat belts to inclines within minutes to maximize floor space, or accomo-date special sorting conditions. Tatch-A-Cleat is quick and easy to install with simplehand tools without even removing your belt from the conveyor. There are six types ofcleats available to meet all your needs:

Econo-Cleat Model ECDesigned for transporting light to medium-weight bulk materials along steep inclines.These cleats, made of specially-compounded high-durability PVC or EPDM rubber,are attached with flathead elevator bolts and 1" flat washers and hex nuts. Availablein 1-1/4", 2", 3", 4" and 6" heights.

Tatch-A-Cleat Model LDesigned to prevent material roll-back on incline conveyors, in light-duty applications. These cleats, made of black orwhite FDA-approved nitrile rubber, are installed using Phillips head machine screws that are secured into a moldedinsert inside the cleat. Available in 5/8", 1", 1-1/2", 2" and 3" heights.

Tatch-A-Cleat Model HDIdeal for transporting abrasive and heavy bulk materials. These cleats are made of a black SBR compound, and areattached via Phillips flathead tapping screws secured into a molded insert inside the cleat. Available in 1" and 2"heights.

Tatch-A-LugProvides an inexpensive solution for belts used ot elevate cased, boxed or bagged goods where long cleat lengths arenot required. Made of molded, FDA-approved isoprene, these cleats are attached with Phillips head machine screwsthat are secured into a molded insert within the peg. Available in 2" and 3" heights.

Tatch-A-GuideThese V-shaped rubber guides attach to the underside of conveyor belts to keep them centered over split or groovedpulleys. They are made of high tensile strength neoprene rubber that has been specially compounded to resist oil andabrasion. A Phillips head machine screw is screwed into a molded insert within the guide. Available in A, B and Csizes.

FOR CLEAT PATTERN SELECTION INFORMATION, SEE PREVIOUS PAGE.

34

Belt Cleaning Systems

Belt Cleaning SystemsSkalper Belt CleanersASGCO’s world-class primary cleaners and pre-cleaners are used all over the world. Thereare over 10,000 in service on a given day, reducing clean-up on every continent! Available infull-size or smaller Mini-Skalper versions.

Hercules Mine Duty CleanerThis pre-cleaner can be used for the most demanding applications -- it is super-sized anddoes super-duty work!

Pocket Belt Cleaning SystemThe Pocket system is an economical choice that features slide-on/slide-off blade segments.

NewWave Secondary Cleaner FamilyThree models (I, II and III) of secondary cleaners with a variety of blades to handle anymaterial. The NewWave III is a simple, economical reversing secondary cleaner.

Razorback Secondary CleanerThe Razorback has a heavy-duty urethane blade secondary for those that prefer not to usemetal scrapers on their belts.

ASGCO V-Plow and Diagonal PlowsASGCO’s heavy-duty unit protects the belt by keeping debris from being caught between thebelt and the pulley.

35

Material ContainmentSystems

Material Containment SystemsClamp-Mount Skirtboard SystemsASGCO has created a system for the fastest, easiest adjustment of skirtboard componentsever! Several configurations are available to suit any condition.

Tri-Seal Sealing CompoundThe Tri-Seal uses triple sealing action so the inside of the conveyor is three times more likelyto stop fines from escaping the load zone than conventional skirting.

Slide-N-Seal Impact BedYou can seal your skirt area more efficiently by eliminating belt sag between idler rolls.

Slide-N-Roll Impact BedThis keeps your belt from rolling and seals your skirt area while reducing bottom wear on thebelt.

Tru-Trainer Alignment SystemsSmooth out belt training problems caused by buildup. The Tru-Trainer also keeps your beltout of the conveyor frames. Available in three configurations: Flat Return (shown in picture),Dual Return or Troughing.

Dura-Sleeve Return IdlerThis is the longest lasting return idler of all -- a clear winner that reduces maintenance soindividual sleeves can be replaced without removing heavy return idlers.

36

ConveyorComponents

Conveyor Component Locations

Head PulleyLocated at the discharge terminus of the conveyor. Provides driving force for the conveyor. May or may not be thehead pulley. Usually it has a larger diameter than other pulleys in the system and is often lagged to increase traction.

Take-Up Bend PulleyChange belt direction on the slack side of the conveyor. Usually lagged to provide longer belt life.

Take-Up PulleyProvide adjustment to maintain necessary slack side belt tension. Usually gravity force adjustable.

Snub PulleyTightens belt giving more surface contact between belt and pulley face. Usually located just behind drive pulley.

Determining Pulley Face WidthProper pulley face width is based on the belt width:

• Up to 42 inches belt width - add 2 inches to the face dimension (i.e., 24 inches = 26" pulley face)• Over 42 inches belt width - add 3 inches to the face dimension (i.e., 48" belt = 51" pulley face)

To prevent ordering errors, give the dimensions in this sequence:• 1 - Diameter of pulley, 2 - Face width of pulley, 3 - Shaft size

37

Mine Duty Drum PulleysCCI’s Mine Duty Drum Pulleys utilize a two-piece rim hydraulically seated around preci-sion-cut end and center discs. They have a double sub-arc welded construction on boththe front and back of the hub and end discs, as well as at the rim of the end disc. Theseam created by using each half shell is then ground to a radius with a linear bearing-guided seam finisher.

Diameters: 10” to 60” End Discs: 1”, 1-1/4” and HeavierRims: 3/8”, 1/2”, 5/8”, 3/4” Center Plates: 3/8”

Drum Pulleys

Quarry Duty Drum PulleysCCI’s Quarry Duty Drum Pulleys have a construction similar to the Mine Duty pulleys, witha few changes. They have thicker rims and center discs, and one additional center disc.

Diameters: 12” to 60” End Discs: 1-1/4” and HeavierRims: 1/2”, 5/8”, 3/4” Center Plates: 1/2”

Machined Drum PulleysCCI’s Machined Drum Pulleys are one of the heaviest in the business, with 3/4” thick inte-gral hub end discs, minimum 1/4” rims and 1/4” center plates. Because the pulley havebeen machined, they are thickest in the center where the load is the highest. They runtruer for this reason, insuring a better tracking belt with less vibration transferred to thebearings.

Diameters: 3-1/2” to 10-3/4” Material: Heavy wall pipe or tubingFace: Crowned or Flat

V-Guide Drum PulleysCCI’s V-Guide Drum Pulleys have a construction similar to the Machined Drum pulleys,witha few changes. Each v-guide insert is machined from a minimum 1” tube, custom builtfor each customer’s needs, from a full inventory of A, B and C groove inserts.

Diameters: 4” to 10” Material: Heavy wall pipe or tubingFace: Crowned or Flat

38

Wing Pulleys

Mine Duty Wing PulleysCCI’s Mine Duty Wing Pulleys are designed to meet the three most common modes of failure:wing folding, premature contact bar wear and hub weld fatigue. They are made with heavy contactbars and thick wings, with an oversized end pipe design with quadruple welds at the outer hubdiameter, inner pipe diameter, internally and externally.

Quarry Duty Wing PulleysCCI’s Quarry Duty Wing Pulleys use the most aggressive construction available, with 3/4” x 2”contact bars, 3/8” minimum thick wings and 5/16” gussets. They even have full keyed hubs andbushings for maximum clamping force to the shaft. They feature a unique end pipe design with 1”thick end discs and double sub-arc welded hubs, allowing for shorter wings that protect againstwing folding.

Quarry Duty AR Wing PulleysCCI’s Quarry Duty AR Wing Pulleys are designed for the most rugged applications where extend-ed life is essential. They are constructed with AR400 abrasive resistant steel contact bars, wherethe belt rides on the pulley. The contact bars are 3/4” thick by 2” wide, providing unsurpassedstrength. The wings are a minimum 1/2” thick and provide additional protection against wing fold-ing and premature failure. The pulleys also feature a uniqie end pipe design which reduces wingheight and provides yet another level of protection against failure. They are a natural candidate forprimary conveyor tail sections, surge pile sections and hard-to-reach positions.

Low Profile Wing PulleysCCI’s Low Profile Wing Pulleys are known as “The Eliminator,” because they eliminate tailpulley headaches. They have a unique design that is superb for high tension conveyorswhere limited space prevents a conventional hub and bushing mounting to the shaft. Thepulley features minimum 1” thick wings welded radially around a large diameter hot roll

machined shaft, which is itself turned down outside the pulley for bearing mounting. Each wing is further supported bygussets which care positioned for optimal cleaning action and stability.

Spiral Wing PulleysCCI’s Spiral Wing Pulleys are designed for the ultimate cleaning action in applications wherebuildup of material is a problem. It offers the same aggressive construction as conventional self-cleaning wing pulleys, but includes a reverse helix spiral wrap to clean the belt. The wrap isapplied with heavy welds over the same contact bars found on standard wing pulleys, for superioradhesion. A pulley flat bar is under the spiral wrap for even more protection.

39

Lagging,Take-Ups,Bearings

Rubber LaggingCCI’s Rubber Lagging is designed to meet the demands of any application. They offervulcanized rubber, which is baked onto the pulleys in an autoclave, and cold bond lag-ging, which is adhered to the pulley surface with industrial adhesives. Other optionsare strip lagging, which is welded on the face of the pulley, or shell lagging, which isrubber bonded to rolled shell sections while the pulley is still on the frame.

Standard Thickness: 1/4”, 3/8”, 1/2”Available Styles: Smooth (VRL), Herringbone (HBL), Diamond Groove (DGL)

Take-Up FramesCCI’s take up frames are fabricated from steel, offeringsuperior strength and durability in the most rugged condi-tions. They can accomodate bearing shaft sizes from 1”to 4-15/16”, and are available in standard travel lengthsfrom 9” to 60”.

39

Vulcanized Ceramic LaggingCCI’s latest innovation is VC Lagg, or Vulcanized Ceramic Lagging. It features high tensilerubber, elongated tiles with rounded corners, and water relief grooves for proper escape ofliquids between the pulley and the belt. It can be made in any thickness, and MSHA com-pounds are available.

Protected Screw Heavy Duty

Center Pull Wide Slot

Pillow Block BearingsCCI offers a full line of roller beariings and stocks most common sizes. They can supply SAF, Type E, TAF, Imperialand Spherical mounted units from Dodge, Link Belt, SAF and Rexnord.

Split Housed Spherical Pillow Block Bearings1-11/16” to 6-7/16” Diameters

Type E Pillow Block Bearings1-7/16” to 5-7/16” Bore DiametersHousings iin 2 and 4 bolt designs

40

Easy QuoteForm

FOR FAST QUOTE SERVICE, PHOTOCOPY THIS FORM, FILL IN THE INFORMATIONREQUESTED AND FAX TO RICHMOND SUPPLY COMPANY: (706) 724-5353

Company Name and Address:

Address:

Your Name: Phone: Fax:

Drum Mine Duty Diameter:Wing Mill Duty Face:Magnetic Drive/Tail Pulley Bore:Crowned Full Key Belt Width:Flat Shallow Key Stand. Heavy Duty Bushing Style QD

Vulcanized 1/4" Thickness Herringbone PatternReplaceable 3/8" Thickness Diamond Groove Pattern

1/2" Thickness Machine Finished PatternOther __________ Smooth (Plain) Pattern

Shaft Diameter: ________ No. of Key Ways: ______ Turn Down Diam. A: _______________Overall Length: ________ Key Length: __________ Turn Down Diam. B:_______________

Key Width: ___________Key Depth: ___________

Slide Tube Travel Length: ________Top Angle Bearing Size: _________TMS Ball or Roller Bearing: __________HDT Number of Take-Ups: __________

Regular: Rush:

PULLEYS

RUBBERLAGGING

SHAFTING

TAKE-UPS

DELIVERYDATESNEEDED

Slide-Lag Replaceable LaggingHolz's Slide-Lag traction pads are a unique and proven method of increasing conveyor andelevator performance. Designed for direct application to the drive pulley, they can transformany belt system into a high-performance, low-maintenance operation. In addition to providingoutstanding increases in the coefficient of friction (traction) between the belt and the pulley,they serve to protect the pulley face and belt cover from damage and provides a self-cleaningaction to prevent material build-up on the pulley.

Slide-Lag's combination of elastomer compounds and product design features is consistentlysuperior to conventional vulcanized, cold bond or bolted-on pulley laggings. A unique factory-bonding system elimi-nates lagging separation, making Slide-Lag ideal for severe service conditions with dual or high horsepower drives, orusing steel cable conveyor belts. The MSHA-approved SOF compound provides an added margin of safety for poten-tially hazardous operations in underground mining and meets OSHA standards for grain and fertilizer handling.

The Slide-Lag Formula1. Exclusive elastomer compounding provides a lagging pad with excep-tional drive-pulley traction, abuse resistance and extra-long service life. Theelastomer retains its integrity under the most severe operating conditions.

2. Factory hot-vulcanization under pressure assures the best possiblebond of rubber to backing plate. No lagging failures from loss of adhesionand separation -- the most common problems associated with conventionallagging.

3. Steel backing plates are precision formed at the factory to fit the curvedsurface provided by each individual pulley diameter. This insures proper padstability and long life.

4. Rust-resistant metal retainers are permanently welded or bolted to thepulley face to securely hold the lagging pads in place. When properlyinstalled, lagging cannot shift or pull free from the effects of impact, trappedmaterial or belt or product movement.

5. Four different Slide-Lag Styles:

Style 5 Traction Pads - RSC stock item• Standard 60 ducrometer industrial compound• Drive pulleys• 72-inch lengths• Available in all special compounds• With or without stainless steel backing plates

Style 7 Edge-Crown Pads• Standard 60 ducrometer industrial compound• Drive pulleys - in conjunction with Style 5 pads• 10-inch lengths• Available in all special compounds• Standard or stainless steel backing plates

Style 9 Belt-Saver Pads• Standard 40 ducrometer industrial compound• Non-drive pulleys• 72-inch lengths• Available in all special compounds• With or without stainless steel backing plates

Style 11 Edge-Crown Pads• Standard 40 ducrometer industrial compound• Non-drive pulleys - in conjunction with Style 9 pads• 10-inch lengths• Available in all special compounds• With or without stainless steel backing plates

Pulley Lagging

41

RSC # Size, in. Pulley Diam., in.85601008 72 885601010 72 1085601012 72 1285601014 72 1485601016 72 1685601018 72 1885601020 72 2085601024 72 2485601030 72 3085601036 72 3685601042 72 4285601048 72 48

42

Pulley Lagging

How to Order Slide-LagConveyor and elevator pulleys can be purchased with Slide-Lag pre-installed from the manufacturer, OEM or author-ized Holz distributor. As another option, the new pulley may be purchased separately and Slide-Lag can be installed atthe jobsite. It can also be purchased separately for used pulleys, using one of the following methods:

1. Butt Seam Method using 72" pads, wherein maximum use is made of all material. However, pieces shorter than 4inches without two full fastener slots will be unusable. The number of 72" pads required for butt seam application onmost common pulley diameters can be determined using the table below. However, it should be noted that Slide-Lagcan be factory formed to any diameter and installed using published installation procedures. For diameters not shown,use the formula shown in the second diagram. For pulley widths not shown, use the next larger width or use the sameformula to calculate requirements.

2. Full Width Method using pads cut to exact pulley face width, leaving no butt seams. In this case, the number of 72"pads required would depend entirely on the pulley and the quantity of face-width lengths which can be cut from one 72"pad. In the example below, 18 pads would be needed.

Example36" diameter x 38" face width

36" diameter/2 = 18 pad rows

18 x 36" = 684"

684"/72" = 9.5, or 10 full 72" pads required.

1. Divide the pulley diameter by 2 to deter-mine the number of rows needed to go aroundthe pulley.

2. Multiply the number of pad rows by the pulley face width.

3. Divide by 72" to determine number of 48"pads needed. Round up to the next full length.

Alternate Formula,Butt-Seam Method

PULLEY DIAMETER x FACE WIDTH (both in inches)12 14 16 18 20 22 24 26 30 32 36 38 40 44 46 51 54 60 66 72

6 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 38 1 1 1 1 2 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4

10 1 1 2 2 2 2 2 2 3 3 3 3 3 4 4 4 4 5 5 512 1 2 2 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 614 2 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6 7 716 2 2 2 2 3 3 3 3 4 4 4 5 5 5 6 6 6 7 8 818 2 2 2 3 3 3 3 4 4 4 5 5 5 6 6 7 7 8 9 920 2 2 3 3 3 4 4 4 5 5 5 6 6 7 7 8 8 9 10 1024 2 3 3 3 4 4 4 5 5 6 6 7 7 8 8 9 9 10 11 1230 3 3 4 4 5 5 5 6 7 7 8 8 9 10 10 11 12 13 14 1536 3 4 4 5 5 6 6 7 8 8 9 10 10 11 12 13 14 15 17 1842 4 5 5 6 6 7 7 8 9 10 11 12 12 13 14 15 16 18 20 2148 4 5 6 6 7 8 8 9 10 11 12 13 14 15 16 17 18 20 22 2454 5 6 6 7 8 9 9 10 12 12 14 15 15 17 18 20 21 23 25 2760 5 6 7 8 9 10 10 11 13 14 15 16 17 19 20 22 23 25 28 3072 6 7 8 9 10 11 12 13 15 16 18 19 20 22 23 26 27 30 33 36

43

Shaker Screen Protector

Shaker Screen ProtectorsHolz's Shaker Screen Protector is similar to what is described as a screen channel, bufferstrip, bucker up strip, buffer channel, shaker screen bucker strip, screen cloth protector,bucker up channel or crown bar rubber by other manufacturers. Holz, however, has devel-oped four different designs to give exceptional service in a wide variety of screening appli-cations.

The protector increases the life of your shaker screen by providing a durable cushionbetween the bar frame and the screen cloth. This cushioning action reduces wear on both

metal components for greatly reduced maintenance costs and replacement downtime. It also reduces the noise factor,for a much quieter workplace. Heavy top thickness on all styles provides extra wear resistance and longer life. Theexclusive rubber compounds are designed for resistance tocuts and tears, abrasion, impact and the deteriorating effects ofthe sun and weathering. Positive gripping action on the screenbars makes for easy installation, and helps keep the protectorin place during operation. The protectors are typically made ofblack SBR or EPDM, although several other compounds areavailable for special service conditions. They are shipped instandard lengths of 100 feet.

Nom. Bar Size Appr. Weight/Ft. A B C D F3/4 in. 0.27 lb. 1/4" 13/16" 3/8" 3/4" 3/16"3/8 in. 0.23 lb. 3/8" 13/16" 11/32" 5/8" 3/16"1/2 in. 0.25 lb. 1/2" 1" 5/16" 11/16" 3/16"

Nom. Bar Size Appr. Weight/Ft. A B C D E F1/4 in. 0.25 lb. 5/16" 13/16" 3/8" 1/2" 9/16" 3/16"3/8 in. 0.28 lb. 3/8" 7/8" 3/8" 1/2" 9/16" 3/16"1/2 in. 0.33 lb. 1/2" 1-1/16" 3/8" 1/2" 13/16" 3/16"3/4 in. 0.51 lb. 3/4" 1-1/2" 5/8" 3/4" -- 3/16"

Nom. Bar Size Appr. Weight/Ft. Style A B C D E F3/8 in. 0.82 lb. Round Top 3/8" 1-1/4" 5/8" 1-1/2" -- --3/8 in. 0.55 lb. Flat Top 3/8" 1-1/4" 5/8" 3/4" 13/16" 3/16"

Nom. Bar Size Appr. Weight/Ft. A B C D3/8 in. 0.53 lb. 3/8" 1-1/4" 9/16" 5/8"

44

Belt Conveyor Idlers

CSLB Series IdlersGoodman's CSLB series idlers are designed for medium to heavy duty applicationsin processing plants and permanent overland belts. These tapered roller bearingidlers feature a patented Jeffrey PermaSeal II non-purgeable seal design. Theyhave 3/4” ball bearings, a concentric roll design, and a counter bored roll shell witha protected weld.

Return Idlers

Troughing IdlersMfg. No. Belt Width A B C D E

30CSLB35200 30 in. 33-1/8 in. 10-7/8 in. 8-9/16 in. 12-7/16 in. 6-1/4 - 936CSLB35200 36 in. 38-7/8 in. 12-7/8 in. 8-9/16 in. 13-1/8 in. 6-1/4 - 942CSLB35200 42 in. 44-5/8 in. 14-7/8 in. 8-15/16 in. 14-3/16 in. 6-1/4 - 948CSLB35200 48 in. 50-3/8 in. 16-7/8 in. 8-15/16 in. 14-7/8 in. 7 - 924CSLB35350 24 in. 24-3/4 in. 8-7/8 in. 8-9/16 in. 13-13/16 in. 6-1/4 - 924CSLB35350 30 in. 30 in. 10-7/8 in. 8-9/16 in. 14-15/16 in. 6-1/4 - 924CSLB35350 36 in. 35-5/16 in. 12-7/8 in. 8-9/16 in. 16-1/8 in. 6-1/4 - 924CSLB35350 42 in. 40-9/16 in. 14-7/8 in. 8-15/16 in. 17-9/16 in. 6-1/4 - 924CSLB35350 48 in. 45-7/8 in. 16-7/8 in. 8-15/16 in. 18-3/4 in. 7 - 9

Mfg. No. Belt Width A E24CSLB150 24 in. 33 in. 27 in.30CSLB150 30 in. 39 in. 33 in.36CSLB150 36 in. 45 in. 39 in.42CSLB150 42 in. 51 in. 45 in.48CSLB150 48 in. 57 in. 51 in.

45


Basic Styles of IdlersAll Superior Idlers feature:Rollers - External deflector seal, rounded ends, narrow roll gaps, quick-change capabilitiesBase - Notched angle, up to 36" belt width for single bolt mountingFrame - Jig welded to assure roll alignment, self-cleaning cross members, non-jamming end standsBrackets - Heavy duty foot brackets for one or two-bolt mounting, non-clogging center bracketSafety features - Eye bolt hole for safety switch cable

C 6 - 4 5 E - 3 0

1 32 4 5

ORDERING GUIDE1. Cema Rating - B, C, D or E.2. Roll Size - 4, 5, 6 or 7 inches.3. Troughing Angle - 20, 35 or 45.4. Letter Designation - See below5. Belt Width - Specify in inches.

E - Equal Length Rolls, TroughingEA - Self-Aligning, TroughingEI - Rubber Cushion, TroughingGO - Offset, TroughingU - Unequal Length Rolls, TroughingP - Feeder/PickingRET - Return

FLT - Flat CarrierRETA - Return, Self-AligningRETI - Return, Rubber CushionFLTI - Flat Carrier, Rubber CushionCM - Low Profile Channel MountSM - Low Profile Standard MountBA - Bi-Directional Aligning

46


CEMA-B IdlersSuperior's CEMA-B idlers are made with precision-ground lifetime-lubricated 17mm ball bearings that have positive lipcontact Trash Guard seals. A specially designed die-cast zinc nut, combined with a delrin seal, forms a deep groovelabryinth seal arrangement to protect the bearings. A 17mm solid shaft runs through both bearings for proper alignmentand support. An external deflector seal has a close tolerance to the roll-end disc for additional bearing protection.

4" Diameter Troughed Belt Idlers - Equal Length Rollers


4" and 5" Diameter Return Belt Idlers

Return IdlersTrough Idlers

RSC # Mfg. No.Belt

Width, in.TroughAngle

Weight,lbs. A B C D E F G H J K

86002020 B4-20E-18 18 20° 30 27 7 6-9/16 21-1/16 1/4 9-3/8 29 6 8 1/286002024 B4-20E-24 24 20° 35 33 7 8-3/4 27-3/8 1/4 10-1/16 35 6 8 1/286002036 B4-20E-30 30 20° 43 39 7 10-15/16 33-11/16 1/4 10-15/16 41 6 8 1/286002130 B4-20E-36 36 20° 49 45 7 13-1/16 39-3/4 1/4 11-5/8 47 6 8 1/286003018 B4-35E-28 18 35° 32 27 7 6-9/16 19-5/16 1/4 11 29 6 8 1/286003024 B4-35E-24 24 35° 38 33 7 8-3/4 25-1/16 1/4 12-5/16 35 6 8 1/286003124 B4-35E-30 30 35° 46 39 7 10-15/16 30-13/16 1/4 13-9/16 41 6 8 1/286003136 B4-35E-36 36 35° 52 45 7 13-1/16 36-7/16 1/4 14-13/16 47 6 8 1/2

RSC # Mfg. No.Belt



86005018 B5-20E-18 18 20° 34 27 7-1/2 6-9/16 20-3/4 1/4 9-1/2 29 6 8 1/286005024 B5-20E-24 24 20° 41 33 7-1/2 8-3/4 27-1/16 1/4 10-5/8 35 6 8 1/286005030 B5-20E-30 30 20° 51 39 7-1/2 10-15/16 33-5/16 1/4 11-3/8 41 6 8 1/286005036 B5-20E-36 36 20° 57 45 7-1/2 13-1/16 39-7/16 1/4 12-1/8 47 6 8 1/286006024 B5-35E-24 24 35° 43 33 7-1/2 8-3/4 24-1/2 1/4 12-11/16 35 6 8 1/286006030 B5-35E-30 30 35° 54 39 7-1/2 10-15/16 30-1/4 1/4 14 41 6 8 1/286006036 B5-35E-36 36 35° 60 45 7-1/2 13-1/16 35-7/8 1/4 15-3/16 47 6 8 1/286007030 B5-45E-30 30 45° 55 39 7-1/2 10-15/16 27-7/8 1/4 15-1/2 41 6 8 1/286007036 B5-45E-36 36 45° 63 45 7-1/2 13-1/16 33 1/4 17 47 6 8 1/2

RSC # Mfg. No.Belt

Width, in.Weight,

lbs.Diameter,

in. A B C D E86001018 B4-RET-18 18 18 4 27 21 28-3/4 4 686001020 B4-RET-20 20 19 4 29 23 30-3/4 4 686001024 B4-RET-24 24 22 4 33 27 34-3/4 4 686001030 B4-RET-30 30 24 4 39 33 40-3/4 4 686001036 B4-RET-36 36 27 4 45 39 46-3/4 4 686004018 B5-RET-18 18 23 4 27 21 28-3/4 4 686004024 B5-RET-24 24 27 5 33 27 34-3/4 4 686004030 B5-RET-30 30 32 5 39 33 40-3/4 4 686004036 B5-RET-36 36 36 5 45 39 46-3/4 4 6

47


CEMA-C IdlersSuperior's CEMA-C idlers are made with precision-ground lifetime-lubricated 3/4-inch ball bearings that have positivelip contact Trash Guard seals. A specially designed die-cast zinc nut, combined with a delrin seal, forms a deep triplelabryinth seal arrangement to protect the bearings. A 3/4-inch solid shaft runs through both bearings for proper align-ment and support. An external deflector seal has a close tolerance to the roll-end disc for additional bearing protection.


4" Diameter Return Belt Idlers

Return IdlersTrough Idlers

RSC # Mfg. No.Belt



86005118 C5-20E-18 18 20° 40 27 8-1/2 7-1/16 21-9/16 1/4 11 29 6 8 1/286005124 C5-20E-24 24 20° 44 33 8-1/2 9-1/16 27-5/16 1/4 11-11/16 35 6 9-1/2 1/286005130 C5-20E-30 30 20° 54 39 8-1/2 11-1/16 33-1/16 1/4 12-3/8 41 6 9-1/2 1/286005136 C5-20E-36 36 20° 62 45 8-1/2 13-1/16 38-13/16 1/4 13-1/16 47 6 9-1/2 1/286006218 C5-35E-18 18 35° 42 27 8-1/2 7-1/16 19-7/16 1/4 12-3/8 29 6 8 1/286006224 C5-35E-24 24 35° 47 33 8-1/2 9-1/16 24-11/16 1/4 13-13/16 35 6 9-1/2 1/286206230 C5-35E-30 30 35° 57 39 8-1/2 11-1/16 30 1/4 14-13/16 41 6 9-1/2 1/286006236 C5-35E-36 36 35° 64 45 8-1/2 13-1/16 35-1/4 1/4 16-1/8 47 6 9-1/2 1/286006242 C5-35E-42 42 35° 82 51 9 15-1/16 40-9/16 3/8 17-11/16 53 7-1/2 9-1/2 5-8

RSC # Mfg. No.Belt

Width, in.Weight,

lbs. A B C D E86004118 C4-RET-18 18 19 27 21-5/16 28-3/4 4 686004124 C4-RET-24 24 22 33 27-5/16 34-3/4 4 686004130 C4-RET-30 30 25 39 33-5/16 40-3/4 4 686004136 C4-RET-36 36 31 45 39-5/16 46-3/4 4 686004142 C4-RET-42 42 33 51 45-5/16 52-3/4 4 6

48

LimberollerIdlers

Limberoller IdlersAll of the Crouse-Hinds Limberoller series, troughing and return idlers, utilize only two bearings per idler. One bearingis located at each end of the central shaft.

The trough idler is suspended from these end-mounted bearings, so that it forms a catenary that uniformly supports theconveyor belt. As the belt moves over the idler, the friction between the belt and the rubber causes the idler to revolveon its own axis. Bearings are placed in metal housings, that can be sealed or lubricated externally, at the user's option.The sealed metal housing helps protect vital moving parts from contaminants.

Troughing IdlersThe Limberoller Troughing Idler consists of a steel wire rope that is completely encapsulated in rubber. The elas-tomer is molded to the rope, under heat and pressure, so that a virtually impervious sheath of rubber completely coversthe rope. This basic design varies, depending on belt width, by configuration of the molded rubber jacket.

There are four types of Troughing Idler assemblies: 100, 150, 300 and 350. The 100 and 150 styles use double-rowball bearings, and the bearing housings are slotted to fit into a rigid mounting. The 300 and 350 styles use taperedroller bearings in a trunion-type housing that fits into an oarlock-type support. This design gives the idler freedom ofmotion in the direction of belt loading and travel.

Return IdlersThe Limberoller Return Idler consists of a solid steel shaft that is com-pletely encapsulated in rubber by the same means as the troughingidler. This design varies, depending on belt width, by the configurationsof the molded rubber jacket.

There are three types of Return Idler assemblies: 106, 107 and 307.They each use a double-row ball bearing at each end of the shaft. Thebearing housings of all styles are slotted to fit in specially-designedhanger and support brackets.

1. Continuous belt support2. Long bearing life3. Smooth flow of material, reduced spillage4. Rugged5. Heat resistant6. Corrosion resistant7. Self-cleaning8. Reduced belt wear9. Superior belt alignment10. Lightweight11. Reduced maintenance and downtime.12. Long idler life

Advantages of Limberollers

49

LimberollerIdlers andBrackets

L-350 Series IdlersTroughing Idlers with Tapered RollerBearing, Waffle Weave

L-106 Series IdlersSolid Shaft Return Idlers with DoubleRow Ball Bearings - for High Impact orHeavy Duty. 3-1/2" Roll Diameter

Troughing BracketsStandard Hook & Eye and Impact Garlock

Return Brackets

RSC # Mfg. No. Belt Width, in. Roll Dia., in. Weight, lbs. V R859-1020 500984-331 20 3 9 27-15/16 in. 23 in.859-1024 500984-314 24 3 10 31-15/16 in. 27 in.859-1030 500984-320 30 3 11 37-1-16 in. 33 in.859-1036 500984-338 36 3 12 43-1/8 in. 39 in.

RSC # Mfg. No. Belt Width, in. Shaft Dia., in. Weight, lbs. V R859-2020 500984-389 20 1-1/4 in. 17 26-15/16 in. 23-3/4 in.859-2024 500984-391 24 1-1/4 in. 18-1/2 30-15/16 in. 27-3/4 in.859-2030 500984-393 30 1-1/4 in. 21-1/2 36-15/16 in. 33-3/4 in.859-2036 500984-395 36 1-1/4 in. 24 42-15/16 in. 39-1/4 in.

RSC # Mfg. No. BeltWidth, in.

TroughAngle

Weight,lbs.

A B C D E F G L M Bolt

859-4020 525064-60A 20 25° 18 26-1/16" 7-1/2" 10-13/16" 14-9/16" 29" 4-1/2" 7" 32-1/2" 3" 1/2"859-4024 52-5064-66A 24 35° 19 27-7/8" 7-1/2" 13-5/16" 15" 33" 4-1/2" 7" 35-7/8" 3-1/2" 1/2"859-4030 525064-76A 30 35° 22 32-13/16" 8-1/4" 14-3/4" 16-9/16" 39" 7-1/2" 10" 42-3/16" 4-1/2" 1/2"859-4036 525064-81A 36 35° 26 38-5/8" 8-1/4" 15-7/16" 16-7/8" 45" 7-1/2" 10" 47" 4" 1/2"

RSC # Mfg. No. Belt Width, in. Roll Dia., in. A B L859-3020 1500409 20 3 26-15/16 in. 29 in. 30-7/16 in.859-3024 1500409 24 3 30-15/16 in. 33 in. 34-7/16 in.859-3030 1500409 30 3 36-15/16 in. 39 in. 40-7/16 in.859-3036 1500409 36 3 42-15/16 in. 45 in. 46-7/16 in.

50

UNIT SPECIFICATIONS & ORDERING GUIDE1. Type - Return Roll, Double Roll, Three Roll.2. Roller Diameter - 1.90, 2.375 or 2.875 inches.3. Frame Material -

MS - Low Carbon Steel SS - 304 Stainless Steel

4. Bearing Options - SB - Sleeve bearing, NoLu "S"BBC - Ball bearing ABEC 1, chrome steel, double sealsBBS - Ball bearing ABEC 1, stainless steel, double seals

5. Base Configuration - LB - Ladder Base Construction for use with three-roll idlersAN - 1" x 1" x 3" Angle Base, parallel to major axis of conveyor frameAN90 - 1" x 1" x 3" Angle Base, perpendicular to major axis of conveyor frame

5. Angle

R R - 2 . 3 7 5 - S S - B B C - L B - 3 6

1 32 4 5 6

Troughing Roller Assemblies

Teletrack Troughing RollersBryant's Teletrack stainless steel and thermoplastic rollerassemblies are meant for light to medium duty troughedbelt conveying, primarily in food processing. Bulk materi-als that are light in weight tend to slide off the belt on flatconveyors (slider bed or roller units). Troughed belts mini-mize this and allow faster speeds and greater inclineswith less product loss than flat belt systems. Troughedbelt conveyors can be used in place of the screw convey-ors and require smaller drives. Also, the belt is cheaper toreplace than the stainless trough or auger in a screw con-veyor. Materials with high water content are often trans-ported with troughed belt systems to contain liquids withinthe conveyor and minimize spillage on the processingfloor.

Teletrack rollers are not limited to food grade alone, though. The stainless frame/thermoplastic roller combination isideally suited for the bulk handling of corrosive materials and low carbon steel framed units can be applied to numerousindustrial applications.

The roller units are available in three styles: Return Roll Unit, Two-Roll Troughing Units, and Three-Roll TroughingUnit. The chart on the next page illustrates the various construction components available for each unit.

51

Troughing Roller Assemblies

Teletrack Components

Bearings - End Caps

Tubing

Drive Components

Solid Through Shaft

Hex Shaft - Spring Loaded

Hex Type Conveyor Roll Pins

Bushings, Bushing End Cap

Solid Bearing Material End Caps

Ball Bearing End Caps

Steel Ball Bearing

Reinforced PVC or UMHW Tubing

PVC Tubing

Tapered PVC Tubing

16 Gage Steel Tubing

Belt Drive End

Sprocket Drive End

Hardware

52

ElevatorBuckets

Big J - "CC" Style4B's Big J elevator buckets have a scientifically-designed profile with a correctly angledfront lip for maximum pickup and clean discharge of material over a wide range of oper-ating speeds. The design also reduces back legging by making the brake lines of old-fashioned CC-style buckets obsolete. 4B's CC buckets have the greatest actual meas-ured capacity - meeting or exceeding the water level and usable capacity of all otherbrands. They are made of only the toughest commercial grade high-density polyethyl-ene, urethene or toughened nylon, built for maximum impact and abrasion resistance,as well as bolt-holding strength.

Temperature Range -60° to 225°F (polyethylene).Standard Bolt Holes Fully compatible with other brands. Special holes or venting available.

RSC # Mfg. No. Nom.Size

DIMENSIONS (inches) CAPACITY (cu. inches) Weight (lbs.) No./Pkg.Length Proj. Back Depth Thickness Gross Water Usable Spacing Ea. Pkg.

JP043 4 x 3 4-1/8 3-1/4 3 3/16 19 16 18 4 0.27 15 48JP054 5 x 4 5-1/4 4-3/8 4-1/8 3/16 47 32 35 5 0.34 19 48JP064 6 x 4 6-1/4 4-1/4 4-1/16 13/64 52 36 40 5 0.52 27 48JP074 7 x 4 7-1/4 4-1/4 4-1/16 13/64 65 45 50 5 0.60 31 48JP065 6 x 5 6-5/16 5-1/2 5-1/8 1/4 96 69 76 6 0.85 24 24JP075 7 x 5 7-5/16 5-1/2 5-1/8 1/4 110 76 84 6 1.00 27 24JP085 8 x 5 8-5/16 5-1/2 5-1/8 1/4 126 86 95 6 1.15 31 24

87601010 JP095 9 x 5 9-5/16 5-1/2 5-1/8 9/32 136 107 118 6 32 2487601000 JP095-NH 9 x 5 9-5/16 5-1/2 5-1/8 9/32 136 107 118 6 32 2487601020 JP096 9 x 6 9-5/16 6-5/8 6 1/4 206 144 158 7 1.53 40 2487601030 JP106 10 x 6 10-5/16 6-5/8 6 1/4 224 154 169 7 1.59 42 24

JP116 11 x 6 11-5/16 6-5/8 6 1/4 245 174 191 7 1.71 44 24JP126 12 x 6 12-5/16 6-5/8 6 1/4 253 181 199 7 1.85 48 24JP117 11 x 7 11-7/15 7-3/4 7 9/32 354 265 292 7-1/2 2.26 26 10

87601040 JP127 12 x 7 12-7/16 7-3/4 7 9/32 375 284 312 7-1/2 2.65 30 1087601050 JP147 14 x 7 14-7/16 7-3/4 7 9/32 457 317 349 7-1/2 2.98 32 1087601060 JP147-NH 14 x 7 14-7/16 7-3/4 7 9/32 457 317 349 7-1/2 2.98 32 10

JP157 15 x 7 15-7/16 7-3/4 7 9/32 467 365 401 7-1/2 3.15 34 10JP167 16 x 7 16-7/16 7-3/4 7 9/32 549 406 446 7-1/2 3.25 35 10

RSC # Mfg. No. Size Diameter WeightHFQ4100Z 1/4 x 1 inch 1 inch 2.40

87601540 HFQ4125Z 1/4 x 1-1/4 inch 1 inch 2.5587601550 HFQ4150Z 1/4 x 1-1/2 inch 1 inch 2.85

HFQ4200Z 1/4 x 2 inch 1 inch 3.80HFQ6100Z 5/16 x 1 inch 1 inch 4.10

87601560 HFQ6125Z 5/16 x 1-1/4 inch 1-3/16 inch 4.4587601565 HFQ6150Z 5/16 x 1-1/2 inch 1-3/16 inch 4.80

HFQ6175Z 5/16 x 1-3/4 inch 1-3/16 inch 5.20HFQ6200Z 5/16 x 2 inches 1-3/16 inch 5.60HFQ8100Z 3/8 x 1 inch 1-1/4 inch 6.00HFQ8125Z 3/8 x 1-1/4 inch 1-1/4 inch 6.60HFQ8150Z 3/8 x 1-1/2 inch 1-1/4 inch 7.10HFQ8200Z 3/8 x 2 inches 1-1/4 inch 8.10

RSC # Mfg. No. Size Diameter WeightEF4075 1/4 x 3/4 inch 1 inch 4.10

87601540 EF4100 1/4 x 1 inch 1 inch 4.3087601550 EF4125 1/4 x 1-1/2 inch 1 inch 4.65

EF4150 1/4 x 1-3/4 inch 1 inch 5.00EF6100 5/16 x 1 inch 1-3/16 inch 6.50

87601560 EF6125 5/16 x 1-1/4 inch 1-3/16 inch 7.0087601565 EF6150 5/16 x 1-1/2 inch 1-3/16 inch 7.50

EF6175 5/516 x 1-3/4 inch 1-3/16 inch 8.00EF8125 3/8 x 1-1/4 inch 1-3/16 inch 10.20EF8150 3/8 x 1-1/2 inch 1-3/16 inch 11.25

Elevator BoltsEasifit Elevator Bolts

Fanged Elevator Bolts

53

Starco - Super Low Profile4B's Starco elevator buckets are engineered for higher capacity, with tapered sides toensure maximum fill at a closer spacing. Its unique front profile guarantees clean dis-charge over a wider range of operating speeds than most conventional buckets. It canalso help reduce leg costs, since a smaller bucket elevator size can yield the samecapacity as larger conventional equipment. Starco buckets can be used for a very widerange of granular materials, such as food, feed and grains, chemicals, minerals and fer-tilizer. It works well at speed ranges of 250 to 895 ft./min., depending on pulley diameter, and can be spaced at varyingintervals according to required capacity. Its unique "stream" discharge pattern reduces product degradation and dust.

ElevatorBuckets

Atlas - "AA" Style4B's Atlas elevator buckets are made of DuPont's ZYTEL ST super-tough nylon, injection-molded and designed for higher capacity. These buckets are solid through and through, withno occlusions in the structure. They can be used in many applications such as sand, aggre-gate, cement, coal, sugar, fertilizer and salt.

Temperature Range -40°C to 132°F ( -40°F to 270°F).

RSC # Mfg. No. Nom. Size DIMENSIONS (inches) CAPACITY (cu. inches) Weight(lbs.)Length Proj. Back Depth Thickness Gross Water Min. Spacing

SP100 4 x 3-1/2 4-5/16 3-5/8 2-7/16 5/32 17 13 2-3/4 0.13SP150 6 x 4 6-1/4 4-7/16 3-1/16 13/64 44 30 3-5/16 0.38SP130 5 x 4-1/2 5-1/2 4-3/4 3-3/16 3/16 38.1 28 3-9/16 0.28PP140 6 x 5 5-3/4 4-3/4 3-9/16 3/16 49 37 3-5/8 0.37SP180 7 x 5-1/2 7-1/2 5-3/4 3-11/16 1/4 74 51 3-3/4 0.63PP200 8 x 5-1/2 8 5-7/8 4-7/16 1/4 111 85 4-5/8 0.77SP225 9 x 5 9-1/8 5-1/2 3-11/16 1/4 102 71 3-3/4 0.75SP230 9 x 6-1/2 9-7/16 6-13/16 4-7/16 1/4 136 100 4-3/8 0.95SP280 11 x 6-1/2 11-7/16 6-13/16 4-7/16 1/4 176 123 4-3/8 1.10SP300 12 x 7 12-3/8 7-1/8 4-7/8 1/4 235 165 4-13/16 1.28SP330 13 x 8-1/2 13-3/8 8-3/4 4-7/8 9/32 336 239 5-1/2 1.68

87601147 SP350 14 x 7 14-7/16 7-1/8 4-7/8 9/32 275 201 4-13/16 1.75SP370 15 x 8-1/2 15 8-9/16 5-9/16 9/32 380 269 5-1/2 2.45

RSC # Mfg. No. Nom.Size

DIMENSIONS (inches) CAPACITY (cu. inches) Weight(lbs.)Length Proj. Back Depth Gross Water Usable

AN043 4 x 3 4-1/4 3-1//8 3-1/8 15.9 13.4 14.7 0.25AN054 5 x 4 5-1/4 4-1/8 4-1/8 45.2 34.8 38.3 0.52AN064 6 x 4 6-1/4 4-1/8 4-1/8 54.3 41.5 45.7 0.59AN074 7 x 4 7-1/4 4-1/8 4-1/8 65.3 51.3 56.4 0.66

87601175 AN075 7 x 5 7-1/8 5-1/8 5-1/4 94.6 76.6 84.3 0.9787601185 AN085 8 x 5 8-1/8 5-1/8 5-1/4 111.7 89.7 98.7 1.10

AN095 9 x 5 9-1/8 5-1/8 5-1/4 122.0 101.3 111.4 1.18AN096 9 x 6 9-3/8 6-1/8 6-1/8 170.9 132.4 145.6 1.48AN106 10 x 6 10-3/8 6-1/8 6-1/8 191.6 148.3 163.1 1.61AN116 11 x 6 11-3/8 6-1/8 6-1/8 209.3 163.5 179.9 1.70AN126 12 x 6 12-3/8 6-1/8 6-1/8 248.1 188.0 206.8 2.10AN127 12 x 7 12-3/8 7-1/8 7-1/8 320.4 244.1 268.5 2.50AN147 14 x 7 14-3/8 7-1/8 7-1/8 384.4 268.4 328.2 2.75AN148 14 x 8 14-3/8 8-1/8 8-1/8 463.8 351.5 386.7 4.28AN168 16 x 8 16-3/8 8-1/8 8-1/8 540.01 406.4 447.0 4.63AN188 18 x 8 18-1/8 8-1/8 8-1/8 619.4 467.4 514.1 5.24

AN1810 18 x 10 18-1/2 10-1/8 10-1/8 915.0 690.0 759.0 8.50

54

Sensors

Level Monitors

Hazard Monitors

Binswitch Capacitance Level SwitchThe Binswitch monitor detects level or plug situations in bulk granular solids orliquids. It features a simple, self-contained proximity switch, in a tough, polycar-bonate housing. It is available in three versions: (1) multi-voltage programmableoutput with timer, (2) 110VAC - 220VAC standard or (3) 2-wire version fordiaphram switch replacement.

Autoswitch RF Capacitance ProbeSet it and forget it! The Autoswitch monitor detects level or plug situations in bulkgranular solids or liquids. It is completely self-contained for operation direct from115/240 volts 50/60 Hz or 24 volts DC. It has a simple push-button calibrationwith a data protection switch, and power-shield automatic compensation formaterial build-up on probe.

RLI Rotary Level IndicatorThe RLI detects high and low levels of bulk granular solids in bins, tanks or silos.It is self-contained in tough, corrosion-resistant housing. The motor and gearboxare Swiss-made, and switch off when rotation is impeded. A V-ring seal on the316 stainless steel paddle shaft is dust-tight. A super heavy-duty version is alsoavailable with SS bearings and Teflon/SS shaft seals.

Watchdog Elite Bucket Elevator MonitorThe Watchdog Elite monitors belt alignment, belt speed, bearing temperature,pulley alignment and plugged conditions for bucket elevators. It incorporates thelatest dual PIC microprocessors and non-volatile memory chips. An LCD screendisplays messages. Calibration and set-up parameters are accessed via pass-word and front panel touch buttons. Simple, reliable and consistent!

Speedswitch Underspeed Motion MonitorThe Speedswitch monitors rotating machinery for dangerous underspeed condi-tions. It it totally sealed, almost maintenance-free with no moving parts. It alsofeatures dual set points, at 10% and 20% underspeed, and also featurestachometer and relay contact outputs. A non-contact sensor requires no contactwith monitored machines.

Rotech Heavy Duty Speed MonitorThe Rotech Encoder provides information on shaft speed, direction, position andrevolution count. Its heavy duty aluminum construction can withstand severeenvironments. Many different types of output available, including intrinisicallysafe versions. The control module is available for non-PLC computer control.

55

Conveyors and Systems

Hytrol ConveyorsHytrol is a major manufacturer of conveyors, conveying systems, and conveyor accessories. Since its beginnings in1947, Hytrol has grown into one of the largest manufacturers of conveyors and conveying hardware in the world. Theyoffer products in a wide variety of styles:

Horizontals - Slider Bed, Roller Bed, & Live Roller • Slider Bed - Medium and Heavy Duty Belts, Troughed and Slider Bed Belts,

High Speed Belt Curve• Roller Bed • Live Roller - Straight and Spool Curves & Spurs

Horizontals - Accumulating Minimum & Zero Pressure • Accumulating-Min. Pressure - Power Accumulating, Live Roller Curves and Spurs, Accumulating Power• Accumulating-Zero Pressure - Accumulating-Zero Pressure, Plastic Belt, Heavy Duty Belt Driven Accumulating,

Heavy Duty Power

Horizontals - Chain Roller & Miscellaneous • Chain Roller - Chain Driven Live Rollers and Curves, Chain Driven Spurs, also Roll-to-Roll• Miscellaneous - Heavy Duty Slat, Drag Chain, Wire Mesh Belt, Plastic Belt

Sortation & Systems Accessories • Sortation - High Speed and Regular Speed Sortation Conveyors• Systems Accessories - Spur Curve Switch, Linear Thruster Package Stop, Overhead Push-off, Double Powered

Pivot Diverter, Light/Medium Duty Pusher

Inclines & Portables • Inclined - Cleated Inclined Belt, Floor-to-Floor Incline (Roller Bed/Slider Bed) • Portables - Folding Booster, also Parts (Low Profile, Piano Hinge, Light Duty)

Gravity • Gravity - Skatewheel, Roller, Conveyor Rails, Manual Gate, Ball Transfer Table • Extendibles - Heavy Duty Flexible Gravity Skatewheel

Pre-Engineered ConveyorsVersa Conveyor has provided material handling equipment for large and small companies in almost every segment ofmanufacturing and warehousing - from a single conveyor to complete custom-designed systems. This combination ofexpertise and experience means they can deliver quality products at reasonable costs. Versa produces several differ-ent types of conveyors:

Gravity ConveyorsAccording to Versa, the most inexpensive source of movement isgravity. Not only is the power free, but gravity conveyors are muchlower in cost than those driven by electric motors. With gravity, theapplications are limited to horizontal movement from a high point toa lower point. Available models include:

GW - Gravity Wheel GR - Gravity RollersMR - MiniRoll Gravity GR - Roller Conveyor FramesBT - Ball Transfer AW - Accordion Wheel GR - Light duty Roller GTP - Gravity Telescopic Conveyor

Belt ConveyorsVery economical in power consumption, belt conveyors consist of amotor-driven endless belt riding on rollers or a slider bed, all mountedin a supporting structure. Used for handling either constant or intermit-tent flows horizontally, up or down (25-30º max.) for long or short dis-tances braking and metering product. They can be permanently fixed tothe floor, suspended from the ceiling or in a portable model. The follow-ing types of conveyors are available, with numerous belt material andcleats specially adapted to the application:

Belt Conveyors Portable Belt ConveyorsMB - Mini-Belt Conveyor T75 - Troughed BeltQ5 - End Drive Horizontal Belt Conveyor P - Portable PartsH/I - Horizontal Incline Belt Conveyor U/C Transition Parts

Live RollersThe term "Live Roller" merely describes the addition of POWER to a roller conveyor.This is accomplished either by snubbing a motor driven endless belt, V-belt, cable orby a motor driven solid lineshaft with "O-rings" driving each roller from the shaft. Liveroller conveyor is ideally suited for ACCUMULATION of product.

LRA - Live Roller Accumulator CSC - Live Roller Curve LS - Line Shaft LCDTC - Live Roller CurveVP - Vari-Pressure CDTC - Live Roller Curve HVP - Vari-Pressure CDC - Live Roller Curve CS - Chain Driven LCDA - Pallet AccumulatorHCD - Chain Driven CDA - Pallet Accumulator81X - Pallet Accumulator HCDA - Pallet Accumulator VC - Live Roller Curve

Express Conveyors

57

Best/Flex ConveyorsBEST's flexible expandable conveyors are anything but "flimsy." Throughout the years they have explored new ideasand developed a patented design that provides structural steel support across the entire conveyor width. Other exclu-sive Best features include:

• Heavy Duty Side Plates that feature reinforced aluminum construction, assembled with bolts - no rivets or clips.The side plates also have a unique ribbed design for even greater strength.

• Perpendicular Legs that remain straight in both the expanded and compacted positions. This provides greatermobility, strength and stability, especially for truck loading and unloading operations.

• Large Expansion Ratios up to 4:1, so you can store 12 feet of conveyor in a 3-foot area. This lets you save valu-able floor space between jobs, and let's not forget the flexibility so you can position it wherever you need it!

BEST's conveyors can be used to solve many day-to-day problems in the workplace. Such as the "dead-space" wastedby pallets when instead you could use a BEST conveyor to fluid-load your trailer. Or suppose your existing conveyorstops 12 ft. short of the dock door? BEST has the solution, with an expandable conveyor that continues the automationall the way to the nose of the trailer. Available options include the Best/Flex gravity system, the Best/Flex power sys-tem, and the BestReach drive-in conveyor.

FlexibleExpandableConveyors

BestReach Drive-In Conveyor.Best/Flex Gravity Roller withZinc-Plated Rollers Installed.

Best/Flex Gravity Roller withSteel Skatewheels Installed.

58

Belt Chain Conveyor Components & SprocketsDyna-Veyor is a leading manufacturer of high-precision thermoplastic components, all custom-molded.Their uniquechain designs have been used since 1960, and provide safe, quiet and clean transportation for food processing, bot-tling, distilling, pharmaceutical, dairy, food service, assembly and general industrial applications. Each of Dyna-Veyor'scomponents is made of a high-strength engineering thermoplastic resin, called acetal, that rivals stainless steel in itsperformance. Acetal is known for its high tensile strength, fatigue endurance, low friction coefficitient, rigidity andexceptional dimensional stability. It also has a high moisture resistance, outstanding chemical resistance, and highthermal resistance. Acetal features an internally lubricated characteristic that eliminates the need for lubrication (thus reducing the threat of contamination), and reduces powerand wear requirements and unitloading. And if that weren't enough,it's also much quieter to use thanthe metal-on-metal racket of steelchains.

Chains & Sprockets

Flex Chain

Curved Wear Strips

Sprockets

820 Series 3-1/4", 4", 4-1/2", 6", 7-1/2"

821 Series 7-1/2", 10", 12"

880 Series, Tab 3-1/4", 4-1/2"

880 Series, Non-Tab 3-1/4", 4-1/2"

882 Series, Tab 4-1/2", 7-1/2", 10", 12"

882 Series, Non-Tab 4-1/2", 7-1/2", 10", 12"

Chain Series B3 & R3 - U18, U24, U30 880, 880TAB, 882, 882TAB B5 & R5 - U24, U30

Multi-Flex 1700, 1701 Tab, 1720, 1703

UHMW Drive Sprocket Tooth Sizes 8, 9, 10, 12

820 & 821 Series 830 (13 - 41), 821 (21 - 29)

880 & 882 Series Tooth Sizes 9, 10, 11, 12, 15

Idler Wheels for All Chains Tooth Equiv. 19, 21, 23, 25

Straight Chain

59

Neoprene SheetsBiltrite's black neoprene sheets are unique in their range of properties affecting oil,ozone, oxidation and sunlight resistance. Performance of any given chloroprene rubberis influenced by the formulation and physical properties designed into the specific com-pound. Available in three styles:

Style 10 – Commercial A smooth finish general purpose compound with low temperature flexibility and oil resist-ance. Resists rotting, checking and cracking due to weather exposure. Style 12 – Matte FinishA commercial blended neoprene blended sheet with a matte finish on one side. It is free of talc and release solutionswhich make it excellent for applications that use pressure sensitive adhesives. Style 15 – 50% Neoprene A premium grade blended sheet for applications requiring a higher percentage of neoprene. The 50% neoprene formu-la resists weathering and has a wider temperature range than commercial neoprene.

Neoprene Sheets

Style Thickness, in. Width, in. Durometer Hardness, Shore A ±5 Tensile Elongation Temperature Wt. per

Lin. Foot, 36" Finish Specifications

10 1/16 thru 1 36 & 48 40 800 350 -20°F to 170°F 1/8 - 2.5 SmoothASTM D-2000

SAE J200, IBC 408MIL 4-3065, SC 408


SAE J200, IBC 508MIL 4-3065, SC 508

10 1/32 thru 21/16, 1/8, 1/4 36 & 48, 72 60 900 300 -20°F to 170°F 1/8 - 2.7 Smooth

ASTM D-2000SAE J200, IBC 609MIL 4-3065, SC 609


SAE J200, IBC 710MIL 4-3065, SC 710


SAE J200, IBC 810MIL 4-3065, SC 810

12 1/16 thru 1/4 36 50 800 300 -20°F to 170°F 1/8 - 2.6 MatteASTM D-2000

SAE J200, IBC 508MIL 4-3065, SC 508

12 1/16 thru 1/4 36, 72 60 900 300 -20°F to 170°F 1/8 - 2.7 MatteASTM D-2000

SAE J200, IBC 609MIL 4-3065, SC 609


SAE J200, IBC 710MIL 4-3065, SC 710


SAE J200, IBC 810MIL 4-3065, SC 810


IBC 510MIL R-3065, SC 510


IBC 610MIL R-3065, SC 610


IBC 710MIL R-3065, SC 710

60

White FDA Nitrile SheetsBiltrite's food-grade sheets were especially formulated for their whiteness. They are used infood, pharmaceutical and cosmetic processing. Made from FDA-approved ingredients, theyare non-toxic, non-marking and non-allergenic and offer good abrasion resistance. They alsohandle oily and greasy products well.

Nitrile, SBR & Butyl Sheets

Styrene Butadiene Rubber SheetsBiltrite's red SBR sheet is an economical choice for low-pressure applications with no oilresistance requirements. It is well suited for the heating and plumbing trades, and has goodaging, abrasion and tear-resistant properties.

Butyl SheetsBiltrite's Butyl sheets offer good electrical, weathering and vibration damping properties. Theycan withstand elevated temperatures and are resistant to gas permeation, acids, alkali andozone. They are not, however resistant to petroleum-based oils, solvents and aromatichydrocarbons, but can withstand animal and vegetable oils.



37 1/16 thru 1/4 36 & 48 60 1000 350 -25°F to 180°F 1/8 - 2.8 Smooth

FDA Approved Non-Toxic Ingredients

Non-AllergenicNon-Marking

Good oil resistance



20 1/32 thru 1/4 36, 48, 72 75 400 150 -20°F to 170°F 1/8 - 3.5 Smooth

ASTM D-1330Grade II

ASTM D-2000Type AA



60 1/16 thru 1/4 36 60 1200 350 -40°F to 225°F 1/8 - 2.5 Smooth ASTM D-2000Type BA

61

Tan Natural Rubber SheetsBiltrite's natural rubber sheets are available in two distinct styles:

Style 27 – FDA Approved Tan natural rubber that is produced entirely with FDA-approved ingredients.

Style 28 – Natural Rubber - Floating StockThis tan floating stock has superior resilience, tensile, elongation and abrasion resistance properties. It has good tearstrength and is resistant to water, most salts, mild acids and many other chemicals. It is not, however, suited for envi-ronments involving ozone, strong acids, animal fats, oils, greases and most hydrocarbons. It is non-marking and non-toxic, and is also available in black.

Rubber & Ply Cloth Sheets

Reduced Ply Cloth Inserted SheetsBiltrite's black reduced ply sheets address the need for dimensional stability in applicationswith a high compression load. The fabric content is one ply for 1/8", two plies for 3/16" andthree plies for 1/4".



27 1/16 thru 1 36 & 48 40 3000 600 -20°F to 140°F 1/8 - 1.9 Smooth ASTM D-2000SAE J200, 1AA 430

28 1/16 thru 1 36 & 48 40 3000 600 -20°F to 140°F 1/8 - 1.9 Smooth ASTM D-2000SAE J200, 1AA 430

Style Thickness, in. Width, in. Durometer Hardness, Shore A ±5 Tensile Elongation Compound Temperature Fabric Weight Fabric Type Oil Resistance Finish

49 1/8, 3/16, 1/4 48 & 72 65 400 200 SBR -20°F to 170°F 4.0 oz. Polyester None Smooth

62

EPDM SheetsBiltrite's ozone-resistant black EPDM sheets are a superior rubber for outdoor and hightemperature applications. They offer good electrical properties while resisting animal andvegetable oils, ozone, steam, water and oxygenated solvents. They are available in avariety of styles:

Style 40 – Commercial Commercial EPDM is the most economical EPDM sheet offered. It is intended to beused in less critical applications where temperatures are of an intermittent nature.

Style 45 – Hi GradeAn intermediate grade product where a higher performance rating is required.

Style 475 – 100% Base An premium-grade EPDM containing 100% EPDM polymer, designed to give maximum performance and service.

EPDM Sheets



40 1/16 thru 1/4 36 & 48506070

800300300250

-40°F to 212°F 1/8 - 2.2 Smooth

ASTM D-2000SAE J200, 3BA

(508, 608, 708), C12MIL R-3065

RS 508, 608, 708, C12

45 1/16 thru 1/4 36

50607080

1500

300300250150

-40°F to 225°F 1/8 - 2.2 Smooth

ASTM D-2000SAE J200, 3BA

(515, 615, 715, 815)B13, C12, F17

MIL R-3065RS 515, 615, 715

815, C12

475 1/16 thru 1/4 36 50, 60 2000 400 -55°F to 300°F 1/8 - 2.2 SmoothASTM D-2000

SAE J200, 5BA 520620, C12, F17, F19

63

Urethane LinersTandem's "Rhino Hyde" sheets aretough, resilient elastomeric ure-thanes specifically designed for usein applications requiring abrasionresistance. Rhino Hyde also pro-vides lightweight, easy installation,excellent impact resistance, goodlow temperature properties, noisereduction, corrosion resistance andchemical resistance to apiphatic hydrocarbons, mild acids and bases. The liners are available in several styles:

Urethane Liners

Fabric BackedLiner

Expanded MetalBack Liner

Solid Metal BackLiner

Ceramic ChipLiner

Standard Rhino Hyde• The original formulation for grain applications• Excellent cut and tear resistance• Durable and long-lasting• Excellent in most abrasion and corrosion applications• Slick surface promotes outstanding product flow.

Rhino Hyde High Energy• Formulated for impingement abrasion - less wear to the

sheet due to special rebound characteristics• Extremely durable in high humidity applications. Will

outlast any other ether-based sheet on the market.

Hydro Hyde Rhino Hyde• Exceptional hydrolytic qualities, specially formulated to

resist degrading due to high humidity and general wet-ness

• Very slick surface to promote steady product flow with-out build-up and sticking due to moisture.

Super Hyde Rhino Hyde• Excellent for sliding and impact applications• Tough and durable - excellent for cement applications• High resistance to direct impact and sliding.

High Temp Rhino Hyde• Works best at temperatures between 190° and 250°F.• Resists heat in high temperature applications• Protects equipment from sliding and/or impingement

abrasion.

Static Stop Rhino Hyde• Works well in a variety of applications, including grain

and general handling• Will not conduct static electricity or cause sparks• Protects equipment from sliding and/or impingement

abrasion.

Fire Stop Rhino Hyde• The only flame retardant urethane sheet available• Will not promote or cause fires within enclosed areas• Provides the longevity of Rhino Hyde with the new safe-

ty feature.

64

Uramic and Ceraflex LinersTandem's Uramic wear liners are the ultimate solution for severe wearproblems. Combining small, specially shaped ceramic tiles with urethane,Uramic panels are highly resistant to both abrasion and impact. The pan-els are custom fabricated for a welded or bolted installation. They are usedfor extremely high-volume sliding with moderate mass impact, such asgravel, medium/large aggregate, coal, salt rock or taconite.

Their Ceraflex liners are premium liners that combine the abrasion resist-ance of ceramic tile with the impact resistance of urethane. Field testshave proven Ceraflex liners to significantly outwear Ni-hard steel liners. They are used with extremely high-volume slid-ing with minor mass impact, such as grain, sand and gravel, small/medium aggregate, cement, coke, coal or iron ore.

Shoes, Ceramic Liners

Uramic Ceraflex

Liner Style LinerThickness

CeramicThickness

Min. Width

Max.Width

Min.Length

Max.Length

Uramic Only 1/2 in. 1/4 in. 3 in. 58 in. 3 in. 60 in.

Ceraflex/Uramic 1 in. 1/2 in. 4 in./3 in. 58 in. 4 in./3 in. 60 in.

Ceraflex/Uramic 2 in. 1 in. 4 in./3 in. 58 in. 4 in./3 in. 60 in.

Uramic Only 3 in. 1 in. 3 in. 58 in. 3 in. 60 in.

Classifier ShoesTandem's urethane classifier shoes are the solution to abrasion problems inherentin screw conveyor applications, such as wet abrasion, grinding abrasion and corro-sion due to handling chemicals. They won’t rust or corrode like metal shoes, andweigh significantly less, making them easier and safer to install and putting lesswear and tear on the motor. When bent or distorted, they return to their originalshape, unlike metal shoes, so they won’t shatter, and are easy to conform to thecontour of the auger when bolted down.

65

Rhino Hyde Mixer LinersTandem's Pan Mixer Liners are made of an exclusive urethane liner system that thoroughly protects pan mixers andsignificantly outwears steel liners. They offer faster cleanup times and less noise. CAD-designed floor sections, preci-sion cut and bolt-in installation insure a superior fit and finish.

Their Drum Mixer Liners are proven to easily outwear steel and rubber, leading to lowered maintenance costs, thanksto reduced wear, fast clean-ups and reduced noise. They are lighter than steel, and use a weld fastening system withknock-in plugs, making installation simple and secure. It is also good for chutes and hoppers.

Mixer Liners

Pan Mixer Liners

Drum Mixer Liners

66

TIVARPolyethylene

Sheets

TIVAR 1000 SheetsPoly Hi Solidur's line of TIVAR polyethylene sheets areavailable in several different formulations. We offer twoselections -- the 1000 line and the Recycled 1000 line.Both lines can handle chemical exposure, frequent wash-downs, impact and submerged applications. They alsooffer protection against excessive noise and excessivewear on parts and chains. In addition, the 1000 line canalso be used for food processing, even in sub-freezingtemperatures.

TIVAR 1000 - Meets FDA/USDA and 3-A Dairy guidelinesfor food handling andpharmaceutical processing. It hasbeen successfully used with food processing bearings,guide rails, rollers, agriculture diverters, chain tensioners,chain guides, wastewater treatment, scraper blades, wearstrips and bearings.

TIVAR 1000 Recycled - Made of a blend of virgin and regenerated TIVAR polymers that maintain an acceptable com-bination of properties for less demanding, non-DFDA applications. It has been successfully used with forest drag con-veyor belts, conveyor chain wear plates, belt conveyor wipers and skirts.

ThicknessTIVAR 1000

NaturalWeight, lbs.

TIVAR 1000 Recycled Green

Weight, lbs.

TIVAR 1000 Recycled Marble Black Weight, lbs.

1/16" 10.0 13.0 12.51/8" 20.0 25.0 25.0

3/16" 30.0 37.5 37.51/4" 40.0 50.0 50.03/8" 60.0 75.0 75.01/2" 80.0 100.0 100.05/8" 100.0 125.0 125.03/4" 120.0 150.0 150.01" 160.0 200.0 200.0

1-1/4" 200.0 250.0 250.01-1/2" 240.0 300.0 300.01-3/4" 280.0 350.0 350.0

2" 320.0 400.0 400.02-1/4" 360.0 450.0 450.02-1/2" 400.0 500.0 500.02-3/4" 440.0 550.0 550.0

3" 480.0 600.0 600.03-1/4" 520.0 650.0 650.03-1/2" 560.0 700.0 700.0

4" 640.0 800.0 800.04-1/2" 720.0 900.0 900.0

5" 800.0 1000.0 1000.06" 960.0 1200.0 1200.0

67

19B Plant MasterRecommended for:Applications requiring a premium-grade braided hose, with excellent flexibilityand maximum resistance to air, water, petroleum oils, gasoline, kerosene andfuel oil (up to 120°F) and lubricating oils (to 212°F). Excellent weather andozone resistance.

Temperature:-40°F to 212°F (-40°C to 100°C)continuous service.

Construction:Tube: Type C (Nitrile). Black.Reinforcement: Braided, high ten-sile synthetic textile cord.Cover: Type C2 (Modified Nitrile).Red.

Multi-Purpose

Premo FlexRecommended for:Applications requiring a premium grade spiral hose with excellent flexibilityand maximum resistance to air, water, petroleum oils, gasoline, kerosene andfuel oil (to 120°F) and lubricating oils (to 212°F). Excellent weather andozone resistance. Non-conductive at 1000V D.C. (1 megaohm/in).


Construction:Tube: Type C (Nitrile). Black.Reinforcement: Synthetic, hightensile textile, cord.Cover: Type C2 (Modified Nitrile).Red. (Black, blue, green and yellow covers available in popularsizes on special order).

RSC # Mfg. No. Nom. ID Nom. OD Max WP Suction Min Bend Radius Wt. Per Ft.

(In.) (mm) (In.) (mm) (psi) (Mpa) (In. Hg) (mm Hg) (In.) (mm) (Lbs.) (Kg)

3219-2901 3/16 4.8 .44 11.2 500 3.45 30.0 762 3.0 76 .07 .03

81502004 3219-2902 1/4 6.3 .50 12.7 250 1.72 30.0 762 3.0 76 .09 .04

3219-2903 1/4 6.3 .62 15.7 500 3.45 30.0 762 3.0 76 .15 .07

3219-2904 5/16 8.0 .62 15.7 250 1.72 30.0 762 3.0 76 .14 .06

2319-2905 5/16 8.0 .69 17.5 500 3.45 30.0 762 3.0 76 .18 .08

81502006 3219-2906 3/8 9.5 .69 17.5 250 1.72 30.0 762 3.0 76 .16 .07

3219-2507 3/8 9.5 .75 19.1 500 3.45 30.0 762 3.0 76 .20 .09

81502008 3219-2908 1/2 12.7 .84 21.3 250 1.72 25.0 635 5.0 127 .21 .10

3219-2909 1/2 12.7 .88 22.4 500 3.45 25.0 635 5.0 127 .25 .11

81502010 3219-2910 5/8 16.0 .94 23.9 250 1.72 20.0 508 6.0 152 .24 .11

3219-2911 5/8 16.0 1.00 25.4 500 3.45 20.0 508 6.0 152 .29 .13

81502012 3219-2912 3/4 19.0 1.09 27.7 250 1.72 20.0 508 6.0 152 .30 .14

3219-2913 3/4 19.0 1.19 30.2 500 3.45 20.0 508 6.0 152 .41 .19

81502016 3219-2914 1 25.4 1.38 35.1 250 1.72 10.0 254 8.0 203 .43 .20

3219-2915 1 25.4 1.50 38.1 500 3.45 20.0 508 8.0 203 .60 .27

81502020 3219-2916 1-1/4 31.8 1.75 44.5 250 1.72 10.0 254 10.0 254 .71 .32

3219-2917 1-1/4 31.8 1.75 44.5 500 3.45 10.0 254 10.0 254 .70 .32

3219-2918 1-3/8 34.9 1.87 47.5 250 1.72 10.0 254 10.0 254 .74 .34

3219-2919 1-3/8 34.9 1.88 47.8 500 3.45 10.0 254 10.0 254 .76 .35

81502024 3219-2920 1-1/2 38.0 1.96 49.8 250 1.72 10.0 254 12.0 305 .75 .34

3219-2921 1-1/2 38.0 2.00 50.8 500 3.45 10.0 254 12.0 305 .82 .37



3205-0010 3/16 4.8 .44 11.2 250 1.72 30.0 762 2.0 50 .07 .03

3205-0015 1/4 6.3 .50 12.7 250 1.72 30.0 762 2.0 50 .09 .04

3205-0016 1/4 6.3 .57 14.5 315 2.17 30.0 762 2.0 50 .12 .05

3205-0020 5/16 8.0 .56 14.2 250 1.72 30.0 762 2.0 50 .10 .05

3205-0021 5/16 8.0 .67 17.0 315 2.17 30.0 762 2.0 50 .16 .07

81502106 3205-0025 3/8 9.5 .66 16.8 250 1.72 30.0 762 3.0 76 .14 .06

3205-0026 3/8 9.5 .73 18.5 315 2.17 30.0 762 3.0 76 .18 .08

81502108 3205-0030 1/2 12.7 .85 21.6 250 1.72 25.0 635 4.0 102 .22 .10

3205-0031 1/2 12.7 .88 22.4 315 2.17 25.0 635 4.0 102 .24 .11

3205-0035 5/8 16.0 .98 24.9 250 1.72 20.0 508 5.0 127 .27 .12

3205-0036 5/8 16.0 .98 24.9 315 2.17 20.0 508 5.0 127 .27 .12

81502112 3205-0040 3/4 19.0 1.15 29.2 250 1.72 20.0 508 5.0 127 .36 .16

3205-5040 3/4 19.0 1.15 29.2 250 1.72 20.0 508 5.0 127 .36 .16

3205-0041 3/4 19.0 1.19 30.2 315 2.17 20.0 508 5.0 127 .40 .18

81502116 3205-0046 1 25.4 1.47 37.3 250 1.72 10.0 254 8.0 203 .54 .25

3205-0050 1-1/4 31.8 1.75 44.5 250 1.72 10.0 254 10.0 254 .71 .32

3205-0055 1-1/4 38.0 1.96 49.8 250 1.72 10.0 254 12.0 305 .75 .34

68

Duro-FlexRecommended for:Applications requiring maximum flexibility and good resistance to air, water,heat and high-viscosity oils.

Temperature:-40°F to 200°F (-40°C to 93°C) continuous service.

Construction:Tube: Type B (Specially compounded elastomer). BlackReinforcement: Synthetic, high tensile textile cord.Cover: Type B2 (Specially compounded elastomer). Red. All sized through ½" have perforated cover. (Black, blue,green and yellow covers available in popular sizes on special order.)

Adapta FlexRecommended for:Air and water applications requiring maximum flexibility.Outstanding resistance to heat and ozone.


Construction:Tube: Type P (EPDM). Black.Reinforcement: Synthetic, hightensile textile cord.Cover: Type P (EPDM). Red. All sizes through ½" are perforated.

Multi-Purpose



81501304 3200-0002 1/4 6.3 .47 11.9 250 1.72 30.0 762 2.0 50 .08 .04

3200-0003 1/4 6.3 .57 14.5 300 2.07 30.0 762 2.0 50 .13 .06

81501306 3200-0006 3/8 9.5 .66 16.8 250 1.72 30.0 762 3.0 76 .14 .06

3200-0007 3/8 9.5 .73 18.5 300 2.07 30.0 762 3.0 76 .19 .09

81501308 3200-0008 1/2 12.7 .81 20.6 250 1.72 25.0 635 4.0 102 .20 .09

3200-009 1/2 12.7 .88 22.4 300 2.07 25.0 635 4.0 102 .25 .11

3200-0010 5/8 16.0 .98 24.9 250 1.72 20.0 508 5.0 127 .28 .13

81501310 3200-0011 5/8 16.0 .98 24.9 300 2.07 20.0 508 5.0 127 .28 .13

81501312 3200-0012 3/4 19.0 1.15 29.2 250 1.72 20.0 508 5.0 127 .36 .16

3200-5012 3/4 19.0 1.15 29.2 250 1.72 20.0 508 5.0 127 .36 .16

3200-0013 3/4 19.0 1.15 29.2 300 2.07 20.0 508 5.0 127 .36 .16

81501316 3200-0014 1 25.4 1.47 37.3 250 1.72 10.0 254 8.0 203 .56 .25

81501320 3200-0015 1-1/4 31.8 1.73 43.9 250 1.72 10.0 254 10.0 254 .69 .31

81501324 3200-0016 1-1/2 38.0 1.98 50.3 200 1.38 10.0 254 12.0 305 .80 .36



81501804 3204-1301 1/4 6.3 .47 11.9 200 1.38 30.0 762 3.0 76 .08 .04

3204-1304 1/4 6.3 .47 11.9 250 1.72 30.0 762 3.0 76 .08 .04

3204-1386 1/4 6.3 .62 15.7 250 1.72 30.0 762 3.0 76 .15 .07

3204-1307 1/4 6.3 .49 12.4 300 2.07 30.0 762 3.0 76 .09 .04

81501805 3204-1316 5/16 8.0 .53 13.5 200 1.38 30.0 762 3.0 76 .09 .04

81501806 3204-1319 3/8 9.5 .66 16.8 200 1.38 30.0 762 3.0 76 .14 .06

3204-1322 3/8 9.5 .66 16.8 250 1.72 30.0 762 3.0 76 .14 .06

3204-1325 3/8 9.5 .67 17.0 300 2.07 30.0 762 3.0 76 .05 .07

81501808 3204-1328 1/2 12.7 .81 20.6 200 1.38 25.0 635 5.0 127 .20 .09

3204-1331 1/2 12.7 .81 20.6 250 1.72 25.0 635 5.0 127 .20 .09

3204-1334 1/2 12.7 .81 20.6 300 2.07 25.0 635 5.0 127 .19 .09

81501810 3204-1337 5/8 16.0 .93 23.6 250 1.72 20.0 508 6.0 152 .23 .10

3204-1340 5/8 16.0 .93 23.6 250 1.72 20.0 508 6.0 152 .23 .10

3204-5415 5/8 16.0 .93 23.6 250 1.72 20.0 508 6.0 152 .23 .10

81501812 3204-1346 3/4 19.0 1.08 27.4 200 1.38 15.0 381 6.0 152 .29 .13

81501912 3204-1349 3/4 19.0 1.13 28.7 250 1.72 20.0 508 6.0 152 .34 .15

3204-5420 3/4 19.0 1.13 28.7 250 1.72 20.0 508 6.0 152 .34 .15

3204-1355 3/4 19.0 1.13 28.7 300 2.07 15.0 381 6.0 152 .34 .15

3204-5675 3/4 19.0 1.13 28.7 300 2.07 15.0 381 6.0 152 .34 .15

3204-1358 1 25.4 1.39 35.3 150 1.03 10.0 254 8.0 203 .45 .20

81501816 3204-1361 1 25.4 1.39 35.3 200 1.38 10.0 254 8.0 203 .45 .20

3204-1364 1 25.4 1.48 37.6 300 2.07 10.0 254 8.0 203 .55 .20

69

18MBAir Drill HoseRecommended for:Extra heavy duty, high-pressure use on industrial, construction and pneumaticmining applications requiring wire braided hose with an oil-resistant tube andabrasion-resistant cover.


Construction:Tube: Type A (Neoprene). Black.Reinforcement: Braided, high tensile steel wireCover: Type D3 (Natural Rubber). Gray with yellow spiral stripe. All sizes through 1-1/4" are perforated.

Thermo AG 800Insecticide/Herbicide Hose

Recommended for:Spraying lawns, trees and similar applications with diluted solutions of waterand oil based insecticides and herbicides. For insecticides or herbicidescontaining more than 2% Toluene or Xylene, use Gates 77B.

Temperature:15°F to 150°F (-9°C to 66°C). Maximum temperature dependent on insecticide/herbicide or chemical conveyed.

Construction:Tube: Type G (PVC). Black.Reinforcement: Synthetic, high tensile textile cord.Cover: Type G (PVC). Bright green. Straited.

SpecialApplication



3618-0011 3/4 19.0 1.28 32.5 500 3.45 25.0 635 6.0 152 .63 .29

3618-0021 1 25.4 1.55 39.4 500 3.45 25.0 635 8.0 203 .83 .38

3618-0031 1-1/4 31.8 1.80 45.7 500 3.45 15.0 381 10.0 254 .98 .45

81901724 3618-0041 1-1/2 38.0 2.21 56.1 500 3.45 15.0 381 12.0 305 1.25 .57

3618-0051 2 51.0 2.77 70.4 500 3.45 15.0 381 14.0 356 1.96 .89

3618-0201 2-1/2 63.0 3.46 87.9 500 3.45 10.0 254 30.0 762 2.98 1.35

3618-0205 2-1/2 63.0 3.46 87.9 500 3.45 10.0 254 30.0 762 2.98 1.35

3618-0215 3 76.0 3.97 101.0 500 3.45 10.0 254 36.0 914 3.63 1.65

3618-0225 4 102.0 5.06 129.0 500 3.45 10.0 254 48.0 1219 5.64 2.56



4465-0361 3/8 9.5 .70 17.8 800 5.52 25.0 635 4.0 102 .14 .06

81504406 4465-0362 3/8 9.5 .66 17.8 800 5.52 25.0 635 4.0 102 .14 .06

4465-0371 1/2 12.7 .85 21.6 800 5.52 25.0 635 5.0 127 .20 .09

81504408 4465-0372 1/2 12.7 .78 21.6 800 5.52 25.0 635 5.0 127 .17 .08

70

205MB – Steam KingRecommended for:All types of steam – saturated and superheated – up to 250 psi and 450°F(232°C).


Construction:Tube: Type P2 (EPDM). Black.Reinforcement: Braided, high ten-sile steel wire.Cover: Type P2 (EPDM). Black orred. All sizes are perforated.

Food & Beverage MasterRecommended for:Transfer of milk, juice, soft drinks, pharmaceuticals, cosmetics of water-based products requiring an FDA sanitary hose. Food Master is also suitablefor many dry bulk products via suction, pneumatic or gravity where a sanitaryhose is required.


Construction:Tube: Sanitron. WhiteReinforcement: Synthetic, high tensile textile with static conductive filament; resilient monofilament helix providingcrush and kink resistance.Cover: Type P (EPDM). White or gray with burgundy spiral stripe.

SpecialApplication



3132-0222 3/4 19.0 1.22 31.0 250 1.72 30.0 762 2.0 50 .41 .193132-0216 1 25.4 1.52 38.6 250 1.72 30.0 762 3.0 76 .49 .22

82306950 3132-0217 1-1/2 38.0 2.13 54.1 250 1.72 30.0 762 4.5 114 .87 .4082306955 3132-0218 2 51.0 2.62 66.5 250 1.72 30.0 762 6.0 152 1.17 .53

3132-0219 2-1/2 63.0 3.25 82.5 250 1.72 30.0 762 12.0 305 1.82 .8382306960 3132-0220 3 76.0 3.86 98.0 250 1.72 30.0 762 18.0 457 2.47 1.12

3132-0221 4 102.0 4.88 124.0 250 1.72 30.0 762 36.0 914 3.24 1.47



3605-0651 3/8-1 9.5 .78 19.8 250 1.72 30.0 762 4.0 102 .26 .12

3605-0652 3/8-1 9.5 .78 19.8 250 1.72 30.0 762 4.0 102 .26 .12

81701808 3605-0656 1/2-1 12.7 1.02 25.9 250 1.72 25.0 635 7.0 178 .42 .19

3605-0658 1/2-1 12.7 1.02 25.9 250 1.72 25.0 635 7.0 178 .42 .19

3605-0357 1/2-1 12.7 1.02 25.9 250 1.72 25.0 635 7.0 178 .42 .19

3605- 1-2/2 12.7 1.03 26.2 250 1.72 25.0 635 7.0 178 .41 .19

3605- 3/4-1 19.0 1.22 31.0 250 1.72 20.0 508 9.0 229 .50 .23

81701812 3605-0661 3/4-2 19.0 1.27 32.3 250 1.72 20.0 508 9.0 229 .56 .25

3605-0663 3/4-2 19.0 1.27 32.3 250 1.72 20.0 508 9.0 229 .56 .25

3605-0662 3/4-2 19.0 1.27 32.3 250 1.72 20.0 508 9.0 229 .56 .25

81701816 3605-0666 1-2 25.4 1.52 38.6 250 1.72 20.0 508 11.0 279 .70 .32

3605-0667 1-2 25.4 1.52 38.6 250 1.72 20.0 508 11.0 279 .70 .32

3605-0671 1-1/4-2 31.8 1.92 48.8 250 1.72 20.0 508 16.0 406 1.04 .47

81701824 3605-0676 1-1/2-2 38.0 2.14 54.4 250 1.72 10.0 254 20.0 508 1.22 .55

3605-0681 2-2 51.0 2.66 67.6 250 1.72 10.0 254 25.0 635 1.63 .74

71

SteelheadRecommended for:Water discharge in heavy-duty industrial applications.


Construction:Tube: Type D (SBR). Black.Reinforcement: Multiple plies ofsynthetic, high tensile textile.Cover: Type D (SBR). Black withgreen spiral stripe.

MarlinRecommended for:Water discharge in heavy duty service requiring compact,rugged and lightweight hose.


Construction:Tube: Type P (EPDM). Black.Reinforcement: Multiple plies of synthetic, high tensile textile.Cover: Type D (SBR). Black with green spiral stripe.

WaterSuction &Discharge

RSC # Mfg. No. Nom. ID Nom. OD Max WP Min Bend Radius Wt. Per Ft.

(In.) (mm) (In.) (mm) (psi) (Mpa) (In.) (mm) (Lbs.) (Kg)

83001124 3135-2651 1-1/2 38.0 1.98 50.3 150 1.03 12.0 305 .70 .32

3135-2652 1-5/8 41.0 2.10 53.3 150 1.03 15.0 381 .75 .34

3135-2653 1-7/8 48.0 2.35 59.7 150 1.03 15.0 381 .88 .40

83001132 3135-2654 2 51.0 2.48 63.0 150 1.03 20.0 508 .93 .42

83001140 3135-2655 2-1/2 63.0 2.99 75.9 150 1.03 25.0 635 1.14 .52

83001148 3135-2656 3 76.0 3.49 88.6 150 1.03 36.0 914 1.35 .61

83001156 3135-2657 3-1/2 89.0 3.99 101.0 150 1.03 42.0 1067 1.64 .75

83001164 3135-2658 4 102.0 4.49 114.0 150 1.03 48.0 1219 1.85 .84

83001172 3135-2659 4-1/2 114.0 5.01 127.0 150 1.03 54.0 1372 2.16 .98

83001196 3135-2660 6 152.0 6.51 165.0 150 1.03 72.0 1829 2.83 1.29



3137-0370 1-1/2 38.0 1.82 46.2 150 1.03 12.0 305 .46 .21

3137-0371 1-1/2 38.0 1.90 48.3 150 1.03 12.0 305 .61 .28

3137-0372 2 51.0 2.33 59.2 150 1.03 20.0 508 .65 .30

3137-1373 2 51.0 2.41 61.2 150 1.03 20.0 508 .83 .38

3137-0374 2-1/2 63.0 2.83 71.9 150 1.03 25.0 635 .79 .36

3137-0375 2-1/2 63.0 2.91 73.9 150 1.03 25.0 635 1.01 .46

3137-0376 3 76.0 3.33 84.6 150 1.03 36.0 914 .94 .43

3137-0377 3 76.0 3.41 86.6 150 1.03 36.0 914 1.20 .55

83001356 3137-0378 3-1/2 89.0 3.91 99.3 150 1.03 42.0 1067 1.46 .66

3137-0379 4 102.0 4.33 110.0 150 1.03 48.0 1219 1.31 .60

3137-0380 4 102.0 4.41 112.0 150 1.03 48.0 1219 1.64 .75

3137-0381 5 127.0 5.44 138.0 150 1.03 60.0 1524 2.14 .97

3137-0382 6 152.0 6.40 163.0 150 1.03 72.0 1829 2.29 1.04

3137-0383 6 152.0 6.49 165.0 150 1.03 72.0 1829 2.92 1.33

72

Shark Recommended for:Suction hose used to convey water, detergents, phosphate ester hydraulicfluids and dilute solutions of acids, alkalies and glycols.


Construction:Tube: Type P (EPDM). Black.Reinforcement: Synthetic, high tensile textile with steel wire helix.Cover:Type D (SBR). Black with green spiral stripe.

BarracudaRecommended for:Medium to light duty water suction/discharge for agricultural, construction andindustrial applications. EPDM tube designed to handle a variety of liquidsincluding Lasso®, Lasso II®, and Freedom®.

Temperature:-40°F to 180°F (-40°C to 82°C)

Construction:Tube: Type P (EPDM). Black.Reinforcement: Synthetic, high tensile textile with steel wire helix.Cover: Type P (EPDM). Black with green spiral stripe.




4686-0701 1 25.4 1.45 36.8 150 1.03 30.0 762 5.0 127 .52 .24

4686-0702 1-1/4 31.8 1.71 43.4 150 1.03 30.0 762 6.0 152 .67 .30

4686-0703 1-1/2 38.0 1.96 49.8 150 1.03 30.0 762 8.0 203 .78 .35

83001332 4686-0704 2 51.0 2.46 62.5 150 1.03 30.0 762 10.0 254 1.00 .45

4686-0705 2-1/2 63.0 3.02 76.7 150 1.03 30.0 762 12.0 305 1.44 .65

83001348 4686-0706 3 76.0 3.61 91.7 150 1.03 30.0 762 15.0 381 1.98 .90

83001364 4686-0707 4 102.0 4.61 117.0 150 1.03 30.0 762 20.0 508 2.59 1.18

4686-0708 5 127.0 5.75 146.0 150 1.03 30.0 762 25.0 635 3.85 1.75

83001396 4686-0709 6 152.0 6.76 172.0 150 1.03 30.0 762 30.0 762 4.79 2.18



4686-0203 1-1/4 31.8 1.33 33.8 150 1.03 30.0 762 5.0 127 .52 .24

4686-0204 1-1/2 38.0 1.61 40.9 150 1.03 30.0 762 6.0 152 .61 .28

83201232 4686-0200 2 51.0 1.86 47.2 150 1.03 30.0 762 8.0 203 .78 .35

4686-0205 2-1/2 63.0 2.36 59.9 150 1.03 30.0 762 10.0 254 1.02 .46

83201248 4686-0201 3 76.0 2.90 73.7 150 1.03 30.0 762 14.0 356 1.58 .72

83201264 4686-0202 4 102.0 3.54 89.9 150 1.03 30.0 762 18.0 457 2.08 .95

4686-0207 6 152.0 4.54 115.0 150 1.03 30.0 762 28.0 711 3.72 1.69

83201296 4686-0206 6 152.0 6.68 170.0 150 1.03 30.0 762 28.0 711 3.72 1.69

73

113SCreamery/Paper MillWashdown

Recommended for:Hot water up to 212°F (100°C), where steam is injected into thewater for food handling or processing plant washdown servicerequiring hose with a white cover. NOT RECOMMENDED FOR USEWITH PURE STEAM. Also ideal for paper mills.


Construction:Tube: Type P (EPDM). Black.Reinforcement: Synthetic, high tensile textile cord.Cover:Type PD (EPDM). White. All sizes are perforated.


RSC # Mfg. No. Nozzle? Nom. ID Nom. OD Max WP Suction Min Bend Radius Wt. Per Ft.


83004312 3213-0510 Yes 3/4 19.0 1.25 31.8 200 1.38 15.0 381 6.0 152 .24 .11

3213-0511 Yes 1 25.4 1.52 38.6 200 1.38 15.0 381 8.0 203 .33 .15

3213-0401 No 1/2 12.7 .91 23.1 200 1.38 25.0 635 5.0 127 .28 .13

3213-0413 No 3/4 19.0 1.25 31.8 200 1.38 15.0 381 6.0 152 .49 .22

3213-0501 No 3/4 19.0 1.25 31.8 200 1.38 15.0 381 6.0 152 .49 .22

3213-0416 No 1 25.4 1.52 38.6 200 1.38 15.0 381 8.0 203 .65 .30

3213-0415 No 1 25.4 1.52 38.6 200 1.38 15.0 381 8.0 203 .65 .30

74

609WDry Cement DeliveryRecommended for:Pneumatic transfer of bulk cement and other dry bulk materials.


Construction:Tube: Type D3 (Natural Rubber). Black. Static Conductive. 1/8" thick. (1/4" thick tube also available.)Reinforcement: Synthetic, high tensile textile.Cover: Type D (SBR). Black withgray spiral stripe.

688SBBulk CommodityRecommended for:Transfer of bulk materials via suction, gravity or pneumatic systems whereabrasion resistance is the primary requirement. Examples: Dry cement, sandgravel, feed, seed and slurries.

Temperature:-40°F to 150°F (-40C to 66°C) continuous service.

Construction:Tube: Type D3 (Natural Rubber). Black. Static conductive. 3/16" thick. (3/8" tube also available.)Reinforcement: Synthetic, high tensile textile with steel wire helix.Cover: Type D (DBR). Black currugated with gray spiral stripe.

DryBulk



3129-0660 3 76.0 3.47 88.1 40 .28 36.0 914 1.28 .58

82302064 3129-0670 4 102.0 4.47 114.0 40 .28 48.0 1219 1.58 .72

3129-0675 4-1/2 114.0 4.97 126.0 35 .24 54.0 1372 1.76 .80

3129-0680 5 127.0 5.47 139.0 30 .21 60.0 1524 1.95 .89

3129-0690 6 152.0 6.47 164.0 25 .17 72.0 1829 2.32 1.05

3129-0700 6-5/8 168.0 7.10 180.0 20 .14 72.0 1829 2.55 1.16



4691-0305 2 51.0 2.77 70.4 60 .41 30.0 762 16.0 406 1.66 .75

4691-0325 3 76.0 3.81 96.8 60 .41 30.0 762 24.0 610 2.53 1.15

82307000 4691-0340 4 102.0 4.86 123.0 45 .31 30.0 762 32.0 813 3.22 1.46

4691-0355 4-1/2 114.0 5.36 136.0 40 .28 30.0 762 36.0 914 3.57 1.62

4691-0360 5 127.0 5.86 149.0 40 .28 30.0 762 40.0 1016 3.94 1.79

4691-0346 6 152.0 6.86 174.0 40 .28 30.0 762 48.0 1219 4.65 2.11

75

Master Flex 180 AR/SCRecommended for:Transfer of dry bulk materials via suction, pneumatic or gravity systemswhere abrasion resistance is the primary requirement and a static conductivehose is needed. Can also be used for vacuum or ducting service.

Temperature:-40°F to 158°F (-40°C to 70°C) continuous service

Construction:Body: Type D (SBR). Black. Compounded for abrasion resistance and static conductivity. Reinforcement: Rigid PVD helix. Black.

610WBulk CommodityRecommended for:Pneumatic transfer of flour and other dry food requiring hose with a sanitaryFDA tube.


Construction:Tube: Type D2 (Natural Rubber). Sanitary FDA. White. 3/16" thick.Reinforcement: Synthetic, high tensile textile with static conductor.Cover: Type D3 (Natural Rubber). Gray with burgundy spiral stripe.

DryBulk



82306964 3132-0782 4 102.0 4.56 116.0 40 .28 - - 48.0 1219 2.08 .9582306980 3132-0793 5 127.0 5.56 141.0 30 .21 - - 60.0 1524 2.56 1.16

82306996 3132-0797 6 152.0 6.56 167.0 25 .17 - - 72.0 1829 3.04 1.38



7744-6001 1-1/4 31.8 1.57 39.9 45 .31 29.8 757 2.0 50 .30 .147744-6002 1-1/2 38.0 1.82 46.2 45 .31 29.8 757 2.0 50 .40 .18

82307098 7744-6003 2 51.0 2.35 59.7 40 .28 29.8 757 2.5 63 .60 .27

7744-6004 2-1/2 63.0 2.87 72.9 35 .24 29.8 757 2.5 63 .70 .32

7744-6005 3 76.0 3.50 88.9 35 .24 29.8 757 3.0 76 1.00 .45

82307102 7744-6006 4 102.0 4.63 118.0 30 21 29.8 757 4.5 114 1.70 .77

7744-6007 6 152.0 3.73 171.0 30 .21 28.0 711 9.2 234 3.10 1.41

7744-6008 8 203.0 9.04 230.0 30 .21 27.0 686 15.0 381 5.70 2.59

7744-6009 10 254.0 11.26 286.0 28 .19 25.0 635 30.0 762 9.30 4.23

76

49HWHot Air BlowerRecommended for:Conveying hot air up to 350°F from the blower or compressor to the storagetank used in the transfer of dry bulk commodities.


Construction:Tube: Type H (Butyl). Black.Reinforcement: Synthetic, high tensile textile with steel wire helix.Cover: Type P (EPDM). Black with yellow spiral stripe.

DryBulk



4691-0110 2 51.0 2.53 64.3 125 .86 30.0 762 9.0 229 1.18 .54

83205082 4691-0125 3 76.0 3.57 90.7 100 .69 30.0 762 18.0 457 1.99 .90

4691-0140 4 102.0 4.62 117.0 75 .52 30.0 762 24.0 610 2.65 1.20

77

Plicord BlastSandblasting or Steel Shot Recommended for:Heavy-duty hose for steel shot or sand-blasting in cleaning or finish-ing metal, stone, glass or other surfaces.


Construction:Tube: 5/16" Tufsyn synthetic rubber- static conductive.Reinforcement: Spiral plied synthetic fabric.Cover: Green Plioflex synthetic rubber (Wrapped impression), 4-ply construction.

Special Applications

ArtracAbrasive/Corrosive Material Recommended for:A variety of abrasive material handling applications to transfer sand,gravel, cement, fly ash, glass, metals, plastic pellets, wood chips, bark, fertilizers, rock salts and slurries. All sizes aretested at full vacuum.


Construction:Tube: Thermoplastic alloyed blend of nitrile, polyurethane and PVC, static-conductive.Reinforcement: Black rigid Pliovic helix.Cover: Thermoplastic alloyed blend of nitrile, polyurethane and PVC.

RSC # Mfg. No. ID x OD Max WP Weight

(In.) (mm) (psi) (Mpa) (Lbs./ft.) (Kg/m)

549-027-016 1/2 x 1-3/64 12.70 x 26.59 150 1.0 .41 .61

82303012 549-027-024 3/4 x 1-1/2 19.2 x 38.3 150 1.0 .70 1.04

82303016 549-027-032 1 x 1-57/64 25.4 x 48.1 150 1.0 1.07 1.59

82303020 549-027-040 1-1/4 x 2-5/32 32.0 x 54.8 150 1.0 1.26 1.87

549-027-048 1-1/2 x 5-24/64 38.10 x 136.53 150 1.0 1.42 2.18

549-027-064 2 x 2-56/64 50.80 x 73.03 150 1.0 1.70 2.53

RSC # Mfg. No. ID x OD Max WP Bend Radius Vacuum HG Weight

(In.) (mm) (psi) (Mpa) (in.) (mm.) (In.) (mm) (Lbs./ft.) (Kg/m)

586-462-040 1-1/4 x 1.60 31.75 x 40.6 45 .31 3.0 76.2 29 736.6 .36 .54

586-462-048 1-1/2 x 1.94 38.10 x 49.2 45 .31 3.2 81.3 29 736.6 .42 .62

586-462-064 2 x 2.50 50.80 x 2.50 45 .31 5.5 137.7 29 736.6 .72 1.07

586-462-080 2-1/2 x 3.05 63.50 x 77.4 40 .28 6.0 152.4 29 736.6 .85 1.26

82307100 586-462-107 3 x 3.77 76.20 x 95.8 40 .28 7.5 190.5 29 736.6 1.1 1.65

586-462-123 4 x 4.85 101.60 x 123.2 40 .28 11.0 279.4 29 736.6 2.16 3.21

586-462-13 5 x 5.78 127.00 x 146.9 40 .28 15.0 381.0 29 736.6 2.6 3.87

586-462-155 6 x 7.08 152.40 x 179.8 40 .28 20.0 508.0 29 736.6 3.26 4.85

586-462-187 8 x 9.18 203.20 x 233.2 30 .21 30.0 762.0 29 736.6 5.91 8.80

586-462-219 10 x 11.06 254.00 x 280.0 25 .17 45.0 1143.0 29 736.6 7.66 11.41

78

White FlexwingFood HoseRecommended for:Highly flexible hose for gravity flow, pressure or suction service whentransferring oily and non-oily edibles from tank trucks and in-plant service.


Construction:Tube: White Chemivic (FDA, 3-A and USDA compliant).Reinforcement: Spiral plied synthetic fabric with wire helix.Cover: White Chemivic (Wrapped impression).


Plicord Furnace DoorRecommended for:Carrying cooling water (250°F - 121°C) to furnace doors in steel mills,and similar service operations, where the outside of the hose is sub-jected to open flame and elevated temperatures.


Construction:Tube: Plioflex.Reinforcement: Spiral plied synthetic fabric.Cover: Fiberglass impregnated fabric ply with heat- and flame-resistant rubber cover.

RSC # Mfg. No. ID x OD Bend Radius Vacuum HG Weight

(In.) (mm) (In.) (mm) (In.) (mm) (Lbs./ft.) (Kg/m)

549-151-024 3/4 x 1-13/64 19.05 x 30.56 2 50 29 736.6 .46 .68549-151-032 1 x 1-28/64 25.40 x 36.51 3 76 29 736.6 .56 .85

82301324 549-151-048 1-1/2 x 1-62/64 38.10 x 50.01 4 102 29 736.6 .85 1.27

82301332 549-151-064 2 x 2-34/64 50.80 x 64.29 4-1/2 114 29 736.6 1.22 1.82

549-151-080 2-1/2 x 3-6/64 63.50 x 78.85 5-3/4 146 29 736.6 1.84 2.74

549-151-107 3 x 3-19/64 76.20 x 83.74 7 178 29 736.6 2.19 3.27

549-151-123 4 x 4-41/64 101.60 x 117.87 10 254 29 736.6 3.10 5.04



542-309-016 1/2 x 1-4/64 12.70 x 26.99 200 1.4 .38 .5181701430 539-309-024 3/4 x 1-11/64 19.05 x 29.77 200 1.4 .49 .67

542-309-032 1 x 1-27/64 25.40 x 36.12 200 1.4 .73 1.01542-309-040 1-1/2 x 1-59/64 38.10 x 48.82 200 1.4 1.24 1.71542-039-048 2 x 2-28/64 50.80 x 61.91 200 1..4 1.42 1.95

542-309-064 2-1/2 x 2-60/64 63.50 x 74.61 200 1.4 1.80 2.43

79

Tan FlextraBulk Transfer HoseRecommended for:Tank truck and in-plant service. Used to convey non-oily abrasivematerials such as sand, limestone, plastic pellets and dry abrasive food products. Do not use where static electricityis a problem.


Construction:Tube: Pureten gum rubber (FDAcompliant).Reinforcement: Spiral plied synthetic fabric with wire helix.Cover: Tan Plioflex gum rubber (corrugated) with yellow spiral stripe (Wrapped impression).

Plicord FlexwingPetroleum Transfer HoseRecommended for:Tank truck and in-plant operations to transfer gasoline, oil and otherpetroleum base products up to 50% aromatic content. It is designed for pressure, gravity flow or full suction service.


Construction:Tube: Chemium synthetic rubber (Oil resistant).Reinforcement: Spiral plied synthetic fabric with wire helix.Cover: Black Chemivic synthetic rubber (Oil resistant) with spiral red stripe. Smooth cover, wrapped finish.


RSC # Mfg. No. ID x OD Max. WP Bend Radius Vacuum HG Weight

(In.) (mm) (psi) (Mpa) (In.) (mm) (In.) (mm) (Lbs./ft.) (Kg/m)

549-116-064 2 x 2-39/64 50.80 x 66.28 75 .50 4 101 29 736.6 1.19 1.92

549-116-107 3 x 3-41/64 76.20 x 92.47 75 .50 6 152 29 736.6 1.98 2.93

82301564 549-116-123 4 x 4-4/64 101.60 x 119.06 75 .50 9 228 29 736.6 2.85 4.18

549-116-139 5 x 5-50/64 127.00 x 146.84 75 .50 12 305 29 736.6 4.22 6.20

82301596 549-116-155 6 x 6-50/64 152.40 x 172.24 75 .50 15 381 29 736.6 5.05 7.42


(In.) (mm) (psi) (Mpa) (In.) (mm) (In.) (mm) (Lbs./ft.) (Kg/m)

543-109-040 1-1/4 x 1-49/64 31.75 x 44.85 150 1.0 3 76 29 736.6 .77 1.0182301024 543-109-048 1-1/2 x 2-32/64 38.10 x 51.59 150 1.0 4 102 29 736.6 .96 1.37

82301033 543-109-064 2 x 2-35/64 50.80 x 64.69 150 1.0 4-1/2 114 29 736.6 1.26 1.84

82301040 543-109-080 2-1/2 x 3-4/64 63.50 x 77.79 150 1.0 5-3/4 146 29 736.6 1.62 2.32

82301048 543-109-107 3 x 3-36/64 76.20 x 90.49 150 1.0 7 178 29 736.6 2.03 2.84

82301064 543-109-123 4 x 4-39/64 101.60 x 117.10 150 1.0 10 254 29 736.6 2.68 4.00

543-109-155 6 x 6-44/64 152.40 x 169.86 150 1.0 30 762 29 736.6 5.61 8.36

80

Steam

Flexsteel 250 SteamRecommended for:Cleaning, heat control, fire prevention, pumping, thawing, blow-outservice, steam pumps and hoists in open-end or permanent installa-tion operations. It is used in refineries, shipyards, chemical plants,steel mills, foundaries and heavy industrial applications where high strength is required and where severe environ-mental conditions are encoun-tered.

Temperature:0°F to 450°F (-18°C to 232°C)

Construction:Tube: Pyrosyn synthetic rubber.Reinforcement: Braided steel wire (2 on 3/4" and 1" sizes).Cover: Black or Red Pyrosyn synthetic rubber (Smooth finish, pin pricked).

Plicord 250 SteamRecommended for:All-around steam service in chemical plants, refineries, shipyards anddemanding industrial service. This rugged construction is excellent forcleaning, thawing, blow-out service, steam pumps, hoists and otherapplications.


Construction:Tube: Black Versigard synthetic rubber.Reinforcement: Spiral plied steel wire.Cover: Black Versigard synthetic rubber. Also available in red cover with yellow brand for color coding (Wrappedimpression).



81701408 539-070-016 1/2 x 1-1/16 12.7 x 27.0 250 1.7 .40 .6081701412 539-070-024 3/4 x 1-9/32 19.1 x 32.5 250 1.7 .49 .73

81701416 539-070-032 1 x 1-5/8 25.4 x 41.3 250 1.7 .78 1.16



81701208 549-060-016 1/2 x 62/64 12.7 x 27.0 250 1.7 .33 .5181701212 549-060-024 3/4 x 1-16/64 19.1 x 32.5 250 1.7 .49 .7381701216 549-060-032 1 x 1-32/64 25.4 x 41.3 250 1.7 .61 .9181701220 549-060-040 1-1/4 x 1-52/64 31.75 x 46.04 250 1.7 .83 1.3581701224 549-060-048 1-1/2 x 2-6/64 38.10 x 53.18 250 1.7 1.03 1.6881701232 549-060-064 2 x 2-50/64 50.80 x 70.64 250 1.7 1.88 2.83

549-060-080 2-1/2 x 3-18/64 63.50 x 83.34 250 1.7 2.33 3.94

549-060-107 3 x 3-49/64 76.20 x 95.65 250 1.7 2.73 4.61

81

FabchemRecommended for:The majority of common industrial chemicals in pressure, gravity flowand suction service. Fabchem represents a significant improvementto Goodyear's chemical hose line.


Construction:Tube: Pliosyn, an ultra-high molecular weight polyethylene.Reinforcement: Spiral piled synthetic fabric with a double-wire helix.Cover: Green Versigard with corrugated bright orange longitudinal stripe (Wrapped impression).

Green XLPERecommended for:The majority of today's industrial chemicals in pressure, gravity flowand suction service.

Temperature:-25°F to 150°F (-32°Cto 66°C)

Construction:Tube: Clear Speclar(XLPE).Reinforcement: Spiral plied synthetic fabric with double wire helix.Cover: Green Versigard synthetic rubber with spiral white stripe (Wrapped impression).

Chemical Transfer


(In.) (mm) (psi) (Mpa) (in.) (mm.) (in.) (mm) (Lbs./ft.) (Kg/m)

546-065-016 1/2 x 61/64 12.70 x 24.21 200 1.4 3.5 76 29 736.6 .33 .49

546-065-024 3/4 x 1-14/64 19.05 x 30.96 200 1.4 3.5 90 29 736.6 .46 .69

82301716 546-065-032 1 x 1-30/64 25.4 x 35.31 200 1.4 4.0 102 29 736.6 .60 .90

546-065-040 1-1/4 x 1-47/64 31.75 x 44.05 200 1.4 4.0 102 29 736.6 .73 1.08

82301724 546-065-048 1-1/2 x 1.91 38.10 x 50.01 200 1.4 5.0 127 29 736.6 .84 1.25

82301732 546-065-064 2 x 2-35/64 50.80 x 64.69 200 1.4 6.0 152 29 736.6 1.22 1.82

546-065-080 2-1/2 x 3-36/64 63.50 x 90.49 200 1.4 8.0 203 29 736.6 1.78 2.65

82301748 546-065-107 3 x 3-40/64 76.20 x 92.08 200 1.4 9.0 229 29 736.6 2.11 3.15

82301764 546-065-123 4 x 4-43/64 101.60 x 118.67 200 1.4 10.0 254 29 736.6 2.81 4.19


(In.) (mm) (psi) (Mpa) (In.) (mm) (in.) (mm) (Lbs./ft.) (Kg/m)

546-666-016 1/2 x 62/64 12.70 x 24.61 150 1.0 6 152 29 736.6 .33 .49

546-666-024 3/4 x 1-15/64 19.05 x 31.35 150 1.0 7 178 29 736.6 .46 .69

546-666-032 1 x 1-30/64 25.40 x 37.31 150 1.0 8 203 29 736.6 .60 .90

546-666-040 1-1/4 x 1-47/64 31.75 x 44.05 150 1.0 9 229 29 736.6 .73 1.08

82301624 546-666-048 1-1/2 x 2-1/32 38.10 x 51.59 150 1.0 10 254 29 736.6 .84 1.25

82301632 546-666-064 2 x 2-39/64 50.80 x 66.28 150 1.0 12 305 29 736.6 1.34 2.00

546-666-080 2-1/2 x 3-7/64 63.50 x 78.98 150 1.0 15 381 29 736.6 1.78 2.65

82301648 546-666-107 3 x 3-39/64 76.1 x 91.7 150 1.0 18 457 29 736.6 2.05 3.06

546-666-123 4 x 4-44/64 101.60 x 119.06 150 1.0 24 610 29 736.6 3.00 4.47

82

Chemical Transfer

Blue FlexwingRecommended for:The majority of today's industrial chemicals in pressure, gravity flowand suction service.


Construction:Tube: Clear Speclar (XPLE).Reinforcement: Spiral plied synthetic fabric with double wire helix.Cover: Blue Versigard synthetic rubber with spiral white stripe (Wrapped impression).

RSC # Mfg. No. ID x OD Max WP Bend Radius Weight

(In.) (mm) (psi) (Mpa) (in.) (mm) (Lbs./ft.) (Kg/m)

546-066-016 1/2 x 62/64 12.70 x 24.61 200 1.4 6 152 .30 .48546-006-024 3/4 x 1-15/64 19.05 x 31.35 200 1.4 7 178 .45 .67

82301416 546-066-032 1 x 1 15/32 25.4 x 37.4 200 1.4 8 203 .52 .80

546-066-040 1-1/4 x 1-48/64 31.75 x 44.50 200 1.4 9 228 .70 1.04

82301424 546-066-048 1-1/2 x 2-3/64 38.0 x 51.9 200 1.4 10 254 .89 1.40

82301432 546-066-064 2 x 2-5/8 51.2 x 67.0 200 1.4 12 305 1.29 1.98

82301440 546-066-080 2-1/2 x 3-1/8 63.7 x 79.5 200 1.4 15 381 1.61 2.40

82301448 546-066-107 3 x 3-11/16 76.1 x 93.7 200 1.4 18 457 2.16 3.12

82301464 546-066-123 4 x 4-23/32 102.1 x 119.8 200 1.4 24 609 2.90 4.21

GorillaRecommended for:A wide range of applications in factories, construction, agriculture,quarries, mines, railroads, the oil and gas industry and shipbuilding.Gorilla hose is a premium-quality, multipurpose non-conductive hose.


Construction:Tube: Chemigum synthetic rubber (High Oil Resistance - RMAdesignation: A).Reinforcement: Spiral Flextenyarn (2" size is braided).Cover: Yellow Carbryn rubber(High Oil Resistance- RMA desig-nation: Class A) (Smooth Finish). MSHA approved.

83

HorizonRecommended for:An economical choice for a wide range of industrial, construction andagricultural applications.


ConstructionTube: Versigard synthetic rubber (Medium Oil Resistance - RMA designation: Class C).Reinforcement: Spiral synthetic yarn.Cover: Yellow, Red, or Black Versigard synthetic rubber (Medium Oil Resistance - RMA designation: Class C).

Air & Multi-Purpose



3/16 x .437 4.76 x 11.1 200 1.4 .08 .12

1/4 x .500 6.35 x 12.7 200 1.4 .09 .13

5/16 x 5.82 7.94 x 14.8 200 1.4 012 .18

3/8 x .669 9.53 x 17.0 200 1.4 .15 .22

1/2 x .811 12.70 x 20.6 200 1.4 .20 .30

5/8 x .968 15.88 x 24.6 200 1.4 .27 .40

3/4 x 1.12 19.05 x 28.4 200 1.4 .34 .51

1 x 1.44 25.4 x 36.6 150 1.1 .53 .79

1 x 1.45 25.4 x 36.8 200 1.4 .54 .80

1-1/4 x 1.75 31.75 x 44.4 200 1.4 .62 .92

81501615 569-011-381 1-1/2 x 2 38.10 x 50.8 200 1.4 .73 1.09

2 x 2.50 50.80 x 63.5 200 1.4 1.22 1.88

81501504 569-557-064 1/4 x .527 6.4 x 13.4 300 2.1 .10 .15

81501506 569-557-095 3/8 x .700 9.5 x 17.8 300 2.1 .17 .25

81501508 569-557-127 1/2 x .838 12.7 x 21.3 300 2.1 .22 .33

81501512 569-557-191 3/4 x 1.149 19.1 x 29.2 300 2.1 .37 .55

81501516 569-557-254 1 x 1.480 25.4 x 37.6 300 2.1 .58 .86



569-035-048 3/16 x 0.472 4.8 x 12.0 500 2.7 .08 .1271501004 569-035-064 1/4 x 0.625 6.4 x 15.9 500 2.7 .14 .21

569-035-079 5/16 x 0.688 7.9 x 17.5 500 2.7 .17 .25

71501006 569-035-095 3/8 x 0.750 9.5 x 19.1 500 2.7 .19 .28

71501008 569-035-127 1/2 x 0.906 12.7 x 30.2 500 2.7 .25 .37

569-035-159 5.8 x 1.063 15.9 x 27.0 500 2.7 .34 .51

71501012 569-035-191 3/4 x 1.188 19.2 x 30.2 500 2.7 .39 .58

71501016 569-035-254 1 x 1.500 19.2 x 30.2 500 2.7 .57 .85

569-035-318 1-1/4 x 1.797 31.8 x 45.6 500 2.7 .86 1.10

71501024 569-035-381 1-1/2 x 2.039 38.1 x 51.8 500 2.7 .86 1.27

71501032 569-446-064 2 x 2.620 50.8 x 66.5 500 2.7 1.19 1.76

84

Air & Multi-Purpose

Plicord Steel AirRecommended for:High-pressure air hose for heavy-duty service in construction, mines,quarries and industry.


Construction:Tube: Black SBR/Nitrite, RMA Class B (Medium to high oil resistance).Reinforcement: Spiral plied steel wire.Cover: Yellow Plioflex (Wrapped impression), RMA Class B (Medium to high oil resistance).

Pliovic 250Recommended for:Carrying air, water and many spray solutions. A lightweight, economi-cal hose most commonly used on airlines, in-plant pneumatic toolsand stapler guns, tawn and garden hand sprayers, light-duty air com-pressors, various OEM equipment and most multipurpose applications.


Construction:Tube: Black Pliovic synthetic(RMA Class B, Medium to highoil resistance).Reinforcement: Spiral synthetic yarn.Cover: Blue, red, black, yellow and green Pliovic synthetic, with smooth finish, RMA Class B, medium to high oilresistance.



549-001-016 1/2 x 1-1/64 12.70 x 25.80 750 5.1 .40 .60549-001-024 3/4 x 1-19/64 19.05 x 32.94 750 5.1 .59 .88549-001-032 1 x 1-41/64 25.40 x 41.67 750 5.1 .87 1.28549-001-040 1-1/4 x 2-1/64 31.75 x 51.19 750 5.1 1.17 1.74549-001-048 1-1/2 x 2-9/64 38.10 x 54.37 500 3.4 1.22 1.93

81901732 549-001-064 2 x 2 21/32 51.2 x 67.6 500 3.4 1.56 2.48549-001-080 2-1/2 x 3-21/64 63.50 x 84.53 500 3.4 2.60 3.81

81901748 549-001-107 3 x 3 13/16 76.1 x 96.9 500 3.4 3.03 4.45

549-001-123 4 x 4-58/64 101.60 x 124.62 500 3.4 4.31 6.93



540-201-008 1/4 x .500 6.35 x 12.7 250 1.7 .080 .119540-201-012 3/8 x .656 9.53 x 16.7 250 1.7 .130 .193540-201-016 1/2 x .795 12.70 x 20.2 250 1.7 .150 .223

81501700 540-201-020 5/8 x .935 15.88 x 23.7 250 1.7 .200 .298540-201-024 3/4 x 1.055 1.055 x 26.8 250 1.7 .245 .364

540-201-032 1 x 1.300 25.40 x 33.0 250 1.7 .340 .505

85

Air & Multi-Purpose

WingfootRecommended for:Industrial air service, compressor lines, pneumatic tools, low pres-sure spray and many other applications that require a moderate oilresistance. Wingfoot is a good quality, economical, general-purposehose.


Construction:Tube: Chemigum, RMA Class A (High oil resistance).Reinforcement: Spiral synthetic yarn.Cover: Blue, black or red Chemivic, RMA Class B (Medium to high oil resistance).



569-007-048 3/16 x .438 4.76 x 11.1 200 1.4 .07 .10569-007-064 1/4 x .531 6.35 x 13.5 200 1.4 .10 .15569-007-079 5/16 x .625 7.94 x 15.9 200 1.4 .14 .21569-007-095 3/8 x .688 9.53 x 17.5 200 1.4 .15 .23569-007-127 1/2 x .844 12.70 x 21.4 200 1.4 .21 .32569-007-159 5/8 x 1.000 15.88 x 25.4 200 1.4 .29 .43569-007-191 3/4 x 1.125 19.05 x 28.6 200 1.4 .33 .50

569-007-254 1 x 1.470 25.40 x 37.3 200 1.4 .54 .80569-008-064 1/4 x .543 6.35 x 13.8 300 2.1 .10 .15569-008-079 5.16 x .638 7.94 x 16.2 300 2.1 .14 .21569-008-095 3.8 x .688 9.53 x 17.5 300 2.1 .15 .23569-008-127 1/2 x .858 12.70 x 21.8 300 2.1 .21 .32

81501710 569-008-159 5/8 x 1.015 15.88 x 25.8 300 2.1 .30 .4581501412 569-008-191 3/4 x 1.188 19.05 x 30.2 300 2.1 .40 .60

569-008-254 1 x 1.500 25.40 x 38.1 300 2.1 .55 .82569-008-318 1-1/4 x 1.797 31.75 x 45.6 250 1.7 .74 1.11

569-008-381 1-1/2 x 2.094 38.10 x 53.2 250 1.7 .97 1.44

86

Pressure Washing

Galvanator 3000Recommended for:Pressure washer equipment. Galvanator's rust-resistant reinforce-ment and superior abrasion-resistant cover provide maximum protec-tion against the adverse effects of water, oil and animal fats.


Construction:Tube: Black Chemigum.Reinforcement: Braided steel wires (2).Cover: Yellow or black Carbryn (Wrapped finish). ORS, RMA Class A (High oil resistance).

Gauntlet 3000Recommended for:Pressure washing machines with working pressures up to 3000 psi.Its superior abrasion-resistant cover provides maximum protectionagainst the adverse effects of oil and animal fats.


Construction:Tube: Black Chemigum.Reinforcement: Braided steel wire (1).Cover: Black or yellow oil-resistant Carbryn, RMA Class A (High oil resistance).

RSC # Mfg. No. ID x OD Max WP Bend Radius Weight

(In.) (mm) (psi) (Mpa) (in.) (mm.) (Lbs./ft.) (Kg/m)

74000008 539-200-012 3/8 x .692 9.53 x 17.6 3000 20.6 2.5 95 .25 .37

539-200-016 1/2 x .820 12.70 x 20.0 3000 20.6 3.5 144 .31 .46



74000007 539-100-012 3/8 x .692 9.53 x 17.6 3000 20.6 .22 .33

539-100-016 1.2 x .820 12.70 x 20.0 3000 20.6 .30 .45

87

Pressure Washing

Neptune 3000Recommended for:Pressure washer machines with working pressures up to 3000 psi.


Construction:Tube: Black Chemigum.Reinforcement: Braided steel wire (1).Cover: Black or blue oil-resistant synthetic rubber (RMA Class B - Medium to high oil resistance).



539-085-008 1/4 x .532 6.35 x 13.5 3000 20.6 .16 .2474000006 539-085-012 3/8 x .693 9.53 x 17.6 3000 20.6 .22 .33

539-085-016 1/2 x .820 12.70 x 20.0 3000 20.6 .30 .45

88

Vacuum

Spiraflex DuctingRecommended for:A wide range of uses, including leaf collection machines, manholeblowers, air conditioning and heating, air ducting and pollution controldevices. NOT RECOMMENDED for pressure service, however.


Construction:Tube: Metallic green high-density Pliovic synthetic compound.Reinforcement: Rigid high-density Pliovic helix.Cover: Metallic green high-density Pliovic synthetic compound.

Spiraflex VacuumRecommended for:Dust collection and exhaust transmission where airborne pollutants,fumes and odors are a major problem.


Construction:Tube: White high-density Pliovic compound.Reinforcement: Rigid white high-density Pliovic helix.Cover: White high-density Pliovic compound.

RSC # Mfg. No. ID x OD Bend Radius Vacuum HG Weight

(In.) (mm) (in.) (mm.) (In.) (mm) (Lbs./ft.) (Kg/m)

586-408-032 1 x 1.21 25.40 x 31.0 1.50 38.1 5 127 .13 .19

586-408-040 1-1/4 x 1.50 31.75 x 38.1 2.00 51.0 5 127 .18 .27

586-408-048 1-1/2 x 1.74 38.10 x 44.1 2.25 57.0 5 127 .18 .27

82801432 586-408-064 2 x 2.30 50.80 x 58.4 3.00 76.0 5 127 .28 .42

586-408-080 2-1/2 x 2.80 63.50 x 71.1 4.00 102.0 5 127 .31 .46

586-408-107 3 x 3.32 76.20 x 84.2 6.30 160.0 5 127 .46 .68

586-408-123 4 x 4.44 101.60 x 112.0 7.50 191.0 5 127 .66 .98

586-408-139 5 x 5.41 127.00 x 137.4 9.00 229.0 5 127 .90 1.34

586-408-155 6 x 6.46 152.40 x 164.2 10.00 254.0 5 127 1.25 1.86

586-408-187 8 x 8.52 203.20 x 216.4 12.00 305.0 5 127 1.60 2.39


(In.) (mm) psi Mpa (In.) (mm) (In.) (mm) (Lbs./ft.) (Kg/m)

82801316 586-403-032 1 x 1.22 25.40 x 31.0 37 .26 2.5 64 29 736.6 .13 .19

82801320 586-403-040 1-1/4 x 1.50 31.75 x 38.1 37 .26 3.3 84 29 736.6 .22 .33

82801324 586-403-048 1-1/2 x 1.76 38.10 x 44.7 34 .24 3.8 97 29 736.6 .25 .37

82801332 586-403-064 2 x 2.35 50.80 x 59.6 30 .21 5.5 140 29 736.6 .45 .67

82801340 586-403-080 2-1/2 x 2.87 63.50 x 72.9 30 .21 7.0 178 29 736.6 .61 .91

82801348 586-403-107 3 x 3.42 76.20 x 87.0 30 .21 8.0 203 29 736.6 .77 1.15

82801364 586-403-123 4 x 4.45 101.60 x 113.1 27 .19 14.0 356 15 381.0 1.04 1.55

586-403-155 5 x 5.50 127.00 x 139.8 25 .17 20.0 508 10 254.0 1.41 2.10

82801396 586-403-187 6 x 6.55 152.40 x 166.4 20 .14 25.0 635 10 254.0 2.05 3.05

89

Washdown

Plicord WashdownRecommended for:Environments typically found in paper mills and other industrial opera-tions. Plicord is a quality water discharge hose, offering flexibility andan integral rubber nozzle.


Construction:Tube: Black Plioflex synthetic rubber.Reinforcement: Spiral plied synthetic fabric.Cover: Black Plioflex synthetic rubber (Wrapped impression). Also available in a non-FDA white cover.

Spectra WashdownRecommended for:Washdown service in pulp and papermills where kink resistance is ofmajor importance. Spectra is a heavy-duty water discharge hose.


Construction:Tube: Black Versigard.Reinforcement: Spiral plied synthetic fabric.Cover: Black Versigard.

RSC # Mfg. No. Cover ID x OD Max WP Weight


83004012 542-545-024 Black 3/4 x 1-11/64 19.05 x 29.77 150 1.0 .36 .5283004016 542-545-032 Black 1 x 1-27/64 25.40 x 36.12 150 1.0 .45 .6583004020 542-545-040 Black 1-1/4 x 1-44/64 31.75 x 42.86 150 1.0 .55 .8083004024 542-545-048 Black 1-1/2 x 1-62/64 38.10 x 50.01 150 1.0 .71 1.09

83004124 542-507-048 White 1-1/2 x 1-62/64 38.10 x 50.01 150 1.0 .71 1.09



569-019-127 1/2 x .906 12.70 x 23.0 300 2.1 .27 .4183004212 569-019-191 3/4 x 1.180 19.05 x 30.2 300 2.1 .40 .60

569-019-254 1 x 1.500 25.40 x 38.1 275 1.9 .60 .89

90

Water Discharge

Plicord VersifloRecommended for:Medium-duty service where the hose does not encounter severehandling.


Construction:Tube: Black Versigard.Reinforcement: Spiral plied synthetic fabric.Cover: Black Versigard (Wrapped finish).

PrimelineRecommended for:Light duty discharge service.


Construction:Tube: Black Pliovic compound.Reinforcement: Synthetic fabric.Cover: Grey Pliovic compound.


(In.) (mm) psi Mpa (Lbs./ft.) (Kg/m)

542-527-040 1-1/4 x 1-31/64 31.75 x 37.70 125 .86 .26 .4583001624 542-527-048 1-1/2 x 1-44/64 38.10 x 42.86 125 .86 .30 .5183001632 542-527-064 2 x 2-15/64 50.80 x 56.75 125 .86 .40 .6783001640 542-527-080 2-1/2 x 2-47/64 63.50 x 69.3 125 .86 .49 .8283001648 542-527-107 3 x 3-14/64 76.20 x 81.75 125 .86 .58 .9783001664 542-527-123 4 x 4-16/64 101.60 x 107.96 125 .86 .83 1.49

83001696 542-527-155 6 x 6-20/64 152.40 x 160.34 125 .86 1.58 2.32



83201700 537-555-048 1-1/2 x 1.62 38.10 x 43.8 75 .52 .21 .2983201701 537-555-064 2 x 2.22 50.80 x 56.3 60 .41 .24 .36

83201702 537-555-080 2-1/2 x 2.62 63.50 x 71.0 60 .41 .43 .59

83201703 537-555-107 3 x 3.26 76.20 x 84.0 50 .31 .48 .72

83201704 537-555-123 4 x 4.26 101.60 x 110.0 45 .31 .74 1.00

83201706 537-555-155 6 x 6.28 152.40 x 162.2 35 .24 1.17 1.59

91

Plicord Water DischargeRecommended for:Heavy-duty service for a wide range of applications.


Construction:Tube: Black Plioflex synthetic rubber.Reinforcement: Spiral plied synthetic fabric.Cover: Black Plioflex synthetic rubber.

Water Discharge

Spiraflex RedRecommended for:Medium-duty discharge applications in mining, construction, industry,agriculture and marine service.


Construction:Tube: Black Pliovic.Reinforcement: Spiral synthetic yarn, one longitudinal synthetic yarn.Cover: Red Pliovic, MSHA 26-14C/16.



542-438-048 1-1/2 x 1-53/64 38.10 x 46.43 150 1.0 .49 .73542-438-064 2 x 2-24/64 50.80 x 60.33 150 1.0 .69 1.01

542-438-080 2-1/2 x 2-56/64 63.50 x 73.03 150 1.0 .85 1.22

542-438-107 3 x 3-30/64 76.20 x 88.12 150 1.0 1.34 1.95

542-438-123 4 x 4-32/64 101.60 x 114.30 150 1.0 1.77 2.57

542-438-139 5 x 5-32/64 127.00 x 139.70 150 1.0 2.28 3.29

542-438-155 6 x 6-32/64 152.40 x 165.10 150 1.0 2.48 3.70

541-438-187 8 x 8-36/64 203.20 x 217.49 150 1.0 3.94 5.73

541-438-219 10 x 10-34/64 254.00 x 267.50 150 1.0 4.89 7.10

541-438-251 12 x 12-44/64 304.80 x 322.56 150 1.0 6.95 10.36



83002124 537-521-048 1-1/2 x 1.71 38.10 x 43.6 125 .86 .198 .29483002132 537-521-064 2 x 2.09 50.80 x 57.0 125 .86 .340 .50683002140 537-521-080 2-1/2 x 2.78 63.50 x 70.8 100 .70 .388 .57783002148 537-521-107 3 x 3.24 76.20 x 83.6 100 .70 .445 .66283002164 537-521-123 4 x 4.12 101.60 x 190.8 100 .70 .730 1.086

83004012 537-521-155 6 x 152.40 152.40 x 162.5 100 .70 1.177 1.751

92

Spiraflex 1500Recommended for:General-purpose industrial, agricultural, construction and septic tankcleaning applications.


Construction:Tube: Clear Pliovic.Reinforcement: Rigid green Pliovic helix.Cover: Clear Pliovic.

Water Suction and Discharge

Plicord WaterRecommended for:General-purpose suction and discharge for a wide range of mediumor heavy-duty applications, even on centrifugal and diaphragm pumps.


Construction:Tube: Plioflex synthetic rubber.Reinforcement: Spiral plied synthetic fabric with wire helix.Cover: Black Plioflex synthetic rubber (Wrapped finish).



542-438-048 1-1/2 x 1-53/64 38.10 x 46.43 150 1.0 .49 .73542-438-064 2 x 2-24/64 50.80 x 60.33 150 1.0 .69 1.01

542-438-080 2-1/2 x 2-56/64 63.50 x 73.03 150 1.0 .85 1.22

542-438-107 3 x 3-30/64 76.20 x 88.12 150 1.0 1.34 1.95

542-438-123 4 x 4-32/64 101.60 x 114.30 150 1.0 1.77 2.57

542-438-139 5 x 5-32/64 127.00 x 139.70 150 1.0 2.28 3.29

542-438-155 6 x 6-32/64 152.40 x 165.10 150 1.0 2.48 3.70

541-438-187 8 x 8-36/64 203.20 x 217.49 150 1.0 3.94 5.73

541-438-219 10 x 10-34/64 254.00 x 267.50 150 1.0 4.89 7.10

541-438-251 12 x 12-44/64 304.80 x 322.56 150 1.0 6.95 10.36

RSC # Mfg. No. ID x OD Max WP Bend Radius Vacuum Weight

(In.) (mm) (psi) (Mpa) (In.) (mm) (HG) (Lbs./ft.) (Kg/m)

586-412-024 3/4 x .98 19.05 x 24.8 130 .896 3.25 83 29 .13 .19

586-412-032 1 x 1.26 25.40 x 32.0 106 .73 4.5 114 29 .23 .34

586-412-040 1-1/4 x 1.53 31.75 x 38.8 99 .68 5.0 127 29 .34 .51

83202024 586-412-048 1-1/2 x 1.78 38.10 x 45.3 89 .61 6.0 152 29 .41 .61

83202032 586-412-064 2 x 2.31 50.80 x 58.6 79 .66 8.0 203 29 .58 .86

83202040 586-412-080 2-1/2 x 2.85 63.50 x 73.0 65 .44 10.0 254 29 .82 1.22

83202048 586-412-107 3 x 3.38 76.20 x 85.8 65 .44 12.0 305 29 1.08 1.61

83202064 586-412-123 4 x 4.46 101.60 x 113.2 55 .37 16.0 406 29 1.62 2.41

586-412-155 6 x 6.57 152.40 x 168.0 47 .32 36.0 914 29 3.03 4.51

93

Water Suction and Discharge

Plicord Con-AG Recommended for:General-purpose water suction and discharge in medium or heavyoperations such as construction or agriculture.


Construction:Tube: Black Versigard.Reinforcement: Spiral plied synthetic fabric with wire helix.Cover: Black Versigard (Wrapped finish) with yellow spiral stripe.

Spiraflex 1600Recommended for:Construction and septic tank cleaning operations, and for general-purpose industrial and agricultural applications where mild chemicalresistance is required.


Construction:Tube: Olive green Pliovic.Reinforcement: Rigid white Pliovic helix.Cover: Olive green Pliovic.


(In.) (mm) (psi) (Mpa) (in.) (mm) (in.) (mm) (Lbs./ft.) (Kg/m)

542-159-040 1-1/4 x 1-44/64 31.75 x 42.86 125 .86 4 102 29 736.6 .66 .9883201024 542-159-048 1-1/2 x 1-60/64 38.10 x 49.21 125 .86 4 102 29 736.6 .76 1.13

83201032 542-159-064 2 x 2-29/64 50.80 x 62.31 125 .86 7 178 29 736.6 1.03 1.54

83201040 542-159-080 2-1/2 x 3-1/64 63.50 x 76.60 100 .70 10 254 29 736.6 1.51 2.25

83201048 542-159-107 3 x 3-32/64 76.20 x 88.90 100 .70 14 356 29 736.6 1.78 2.65

83201064 542-159-123 4 x 4-35/64 101.60 x 115.501 75 .52 18 813 29 736.6 2.48 3.70

83201096 542-159-155 6 x 6-39/64 152.40 x 167.88 75 .52 24 1168 29 736.6 4.48 6.68


(In.) (mm) (psi) (Mpa) (in.) (mm) (in.) (mm) (Lbs./ft.) (Kg/m)

586-411-024 3/4 x .98 19.05 x 25.0 130 .896 3.25 83 29 736.6 .19 .27

83201916 586-411-032 1 x 1.24 25.40 x 32.0 106 .730 4.50 114 29 736.6 .25 .34

586-411-040 1-1/4 x 1.53 31.75 x 38.8 99 .680 5.00 127 29 736.6 .34 .51

586-411-048 1-1/2 x 1.78 38.10 x 45.3 89 .610 6.00 152 29 736.6 .41 .61

586-411-064 2 x 2.32 50.80 x 59.0 79 .550 8.00 203 29 736.6 .63 .86

586-411-080 2-1/2 x 2.85 63.50 x 72.3 65 .440 10.00 254 29 736.6 .87 1.19

586-411-107 3 x 3.44 76.20 x 87.4 65 .440 12.00 305 29 736.6 1.15 1.71

586-411-123 4 x 4.43 101.60 x 112.6 55 .370 16.00 406 29 736.6 1.73 2.36

586-411-155 6 x 6.57 152.40 x 166.9 47 .320 36.00 914 29 736.6 3.17 4.72

586-411-187 8 x 8.92 203.20 x 226.5 40 .275 60.00 1524 20 508.0 6.47 9.43

586-411-219 10 x 10.93 254.00 x 277.6 35 .241 100.00 2540 20 508.0 8.75 13.03

94

Blue Max – 2CN• Construction: Two Ply Polyester Neoprene Coated• Sizes: 1" - 24" ID• Std. Lengths: 25 ft• Colors: Blue or Black• Temp. Ranges: -40°F to 250°F• Options: Available as 1CN (One Ply) for temporaryservice or lighter applications. Non-standard ID’s andlengths available. Cuffed ends and additional coatingsavailable.

Features:Dura-Vent's Blue Max hose is the industry standard forlong term applications. It is a rugged, cost effective hosefor dust or fumes under low positive or negative pres-sures, and offers excellent tensile strength and crushresistance.

UFD Urethane• Sizes: 2" - 18" ID• Std. Lengths: 25 ft.• Colors: Translucent Blue, Black or Clear• Temp. Range: -60°F to 180°F

Dura-Thane 30Dura-Vent's UFD Urethane 30 is constructed of a double-ply urethane film, with a spring steel wire helix. It is typi-cally used for abatement recovery, lavatory waste, abra-sive particles, plastic pellets and sawdust recovery. Thishose offers good flexibility and bend characteristics.

Dura-Thane 45Dura-Vent's UFD Urethane 45 is constructed of a three-ply urethane film with a spring steel wire helix. It is typi-cally used for medium to heavy materials handling suchas leaf collecting, street cleaning, rock drilling and saw-dust and woodchip recovery. It offers good flow charac-teristics.

FlexibleIndustrial

Hose

RSC # Hose Size

BLUE (In.)

82803024 1-1/282803028 1-3/482803032 282803036 2-1/482803040 2-1/282803048 3

82803050 3-1/2

82803064 4

82803072 4-1/2

82803080 5

82803096 6

82803112 782803128 882803144 982803160 1082803192 1282803224 14

82803256 16

RSC # Hose Size StyleTRANSLUCENT BLUE (In.)

82803258 4 LD-30 mil

82803260 6 MD-45 mil

95

RFH Constructed of thermoplastic rubber and reinforced with a wire helix, Hi-Tech's RFHis the most versatile general-purpose hose available today. No cements, solvents,chemicals, adhesives or glues are used in the manufacturing process. RFH hassuperior chemical resistance and is capable of handling fumes as tough as MethylEthyl Ketone, sulfuric acid or toluene. It also has good abrasion resistance, andexcellent ozone resistance. It can be manufactured in a variety of colors, or suppliedwith a color stripe.

Specifications• Temperature range: -60°F to 275°F continous service, intermittent to 300°F• Sizes: 2" through 20"• Standard lengths: 25 ft., 50 ft.• Standard color: Black

GeneralPurpose

Hose

RSC # Hose Size

(In.)

82901005 22-1/4

82901010 2-1/282901015 3

3-1/282901020 482901025 4-1/282901030 5

5-1/282901035 682901040 782901045 8

982901050 1082901055 1282901060 1482901065 16

18

20

96

PTFE/Teflon Hose

Resistoflex Nominal Smooth Bore Hose

Crane’s Smooth Bore Teflon “Natural” Hose is a swage style hosewith a thin wall (0.030”).

Mfg. No. ActualI.D.

AverageO.D.

WallThickness

WorkingPressure, 72°F

Min. BurstPressure, 72°F

Min. BendRadius

304-NSB-W 3/16 in. .305 in. .030 in. 3,000 PSI 12,000 PSI 2.0306-NSB-W 5/16 in. .430 in. .030 in. 2,500 PSI 10,000 PSI 4.0308-NSB-W 13/32 in. .535 in. .030 in. 2,000 PSI 8,000 PSI 5.0310-NSB-W 1/2 in. .636 in. .030 in. 1,750 PSI 7,000 PSI 6.5312-NSB-W 5/8 in. .765 in. .030 in. 1,500 PSI 6,000 PSI 7.5316-NSB-W 7/8 in. 1.030 in. .035 in. 1,000 PSI 4,000 PSI 90

97

Fire & MillHoses

Single Jacket Fire HoseThis lightweight, flexible and durable hose is designed for exterior and interior applicationsthat might require the hose to be stored in hump racks, reels or hose houses for prolongedperiods. It is recommended for emergency fire protection in all industries. The hose is constructed of 100% polyesterreinforcement with an extruded, ozone-resistant synthetic rubber liner. It is totally immune to mildew and rot, and isavailable in lengths of 50, 75 or 100 feet.

Double Jacket Fire HoseThis fire-fighting hose is manufactured to exacting municipal requirements. It is constructed of100% polyester inner and outer jackets with an extruded, ozone-resistant synthetic rubberliner. It never needs drying and is totally immune to mildew and rot, and is available in lengthsof 50 feet only. It is intended for municipal and industrial fire protection.

Mill HoseThis lightweight, easy-to-handle general purpose hose is ideal for cleanup, washdown and open end discharge needs.The 100% polyester jacket is totally immune to mildew and rot, and the extruded synthetic rubber liner is ozone-resist-ant. NOTE: This hose is NOT recommended for fire-fighting applications. Sizes up to 2-1/2" are available in 50 and100 ft. lengths, and larger sizes are available in 50-ft. lengths only.

* Stocked as coupled assemblies - 50 ft. long, brass rocker lugs, male and female NST couplings.

* Stocked as coupled assemblies - 50 ft. long, brass rocker lugs, male and female NST couplings.

RSC # Size Style Coupling Bowl Proof TestPressure

Service TestPressure

Weight per50 ft.

* 83003600 1-1/2 in. AP-300 1-3/4 in. 300 PSI 150 PSI 11 lbs.

2 in. AP-300 2-5/16 in. 300 PSI 150 PSI 17 lbs.

2-1/2 in. AP-300 2-13/16 in. 300 PSI 150 PSI 22 lbs.



1-3/4 in. AP-500 2 in. 500 PSI 250 PSI 16 lbs.



RSC # Size Coupling Bowl Proof TestPressure


Weight per50 ft.

1 in. 1-1/2 in. 600/800 300/400 13 lbs.* 83003605 1-1/2 in. 1-15/16 in. 600/800 300/400 17 lbs.

1-3/4 in. 2-1/8 in. 600/800 300/400 18 lbs.2 in. 2-9/16 in. 600/800 300/400 23 lbs.

* 83003615 2-1/2 in. 3 in. 600/800 300/400 29 lbs.3 in. 3-17/32 in. 600/800 300/400 36 lbs.

4 in. 4-17/32 in. 600 300 64 lbs.

RSC # Size Coupling Bowl Proof TestPressure


Weight per50 ft.

1 in. 1-1/4 in. 250 PSI 125 PSI 10 lbs.

83002224 1-1/2 in. 1-3/4 in. 250 PSI 125 PSI 11 lbs.

83002232 2 in. 2-5/16 in. 250 PSI 125 PSI 16 lbs.

83002240 2-1/2 in. 2-13/16 in. 250 PSI 125 PSI 18 lbs.

83002248 3 in. 3-3/8 in. 250 PSI 125 PSI 26 lbs.

83002264 4 in. 4-3/8 in. 250 PSI 125 PSI 46 lbs.

6 in. 6-3/8 in. 250 PSI 125 PSI 78 lbs.

98

Kuri Tec Food & Beverage Hose

Series K7130Polywire Heavy Wall PVC Food & BeverageVacuum/Transfer Hose

Kuriyama's K7130 series hose is made of crystal clear chemical-resistant PVC, formulated to meet applicable FDA, USDA, 3A andNSF regulations, as well as California's Proposition 65. It is reinforced with helically-wound spring steel wire that pre-vents kinking and collapsing, yet will not expand under normal rated working pressures. The glass-smooth interiorreduces material buildup, while the clear walls permit visual confirmation of product flow. This hose is self-extinguish-ing, non-marking, non-toxic and silicone free. Its applications include full vacuum lines, industrial vacuum pumps, foodand beverage dispensing, air and water supply lines, car wash applications, coolant lines, pneumatic parts transferand deionized water systems. Service Temperature Range: 25°F to 150°F (-4°C to 65°C).

Series K3130Heavy Wall PVC Food & Beverage Hose

Kuriyama's K3130 series hose is compounded from non-toxiccrystal-clear PVC ingredients, formulated to meet applicable FDA,USDA, 3A and NSF criteria, as well as California Proposition 65.The hose is reinforced with spiraled polyester yarn and longitudinal blue tracer yarn for identification. It is crystal-clear,for visual confirmation of product flow, and is self-extinguishing, non-marking and silicone-free. Its applications includefood and beverage dispensing (liquid and powdered), air and water lines, potable or deionized water transfer, airbreathing lines, pneumatic lines and packaging machines. Service Temperature Range: 25°F to 150°F (-4°C to65°C).

RSC # Size Code Nominal ID Nominal OD Working Pressure Std. LengthCoil Appr. Wt. Min. Bend

Radius, 68° F70° F 122° F

04 .25 in. (6.4 mm) .5 in. (12.7 mm) 250 PSI 80 PSI 100 ft. 10 lbs. 1 in.06 .375 in. (9.5 mm) .625 in. (15.9 mm) 150 PSI 80 PSI 100 ft. 13 lbs. 1.5 in.08 .5 in. (12.7 mm) .813 in. (20.7 mm) 150 PSI 80 PSI 100 ft. 21 lbs. 2 in.10 .625 in. (15.9 mm) 1 in. (25.4 mm) 150 PSI 65 PSI 100 ft. 30 lbs. 2.5 in.

81503208 12 .75 in. (19.1 mm) 1.125 in. (28.6 mm) 150 PSI 65 PSI 100 ft. 36 lbs. 3 in.81503210 16 1 in. (25.4 mm) 1.375 in. (34.9 mm) 100 PSI 45 PSI 100 ft. 44 lbs. 4 in.

20 1.25 in. (31.8 mm) 1.750 in. (44.5 mm) 100 PSI 50 PSI 50 ft. 37 lbs. 5 in.24 1.5 in. (38.1 mm) 2 in. (50.8 mm) 100 PSI 35 PSI 50 ft. 42 lbs. 6 in.

32 2 in. (50.8 mm) 2.5 in. (63.5 mm) 100 PSI 35 PSI 50 ft. 56 lbs. 8 in.

RSC # Mfg. No. Nominal ID Nominal OD Working Pressure Standard Lengths Approx. Weight

70° F 122° F Coil Cut Lgth. Coil Cut Lgth.

02 .125 in. (3.2 mm) .328 in. (8.3 mm) 350 PSI 200 PSI 300 ft. 100 ft. 12 lbs. 4 lbs.





82502009 08 .5 in. (12.7 mm) .813 in. (20.7 mm) 250 PSI 130 PSI 300 ft. 100 ft. 52 lbs. 17 lbs.

10 .625 in. (15.9 mm) 1 in. (25.4 mm) 225 PSI 125 PSI 200 ft. 100 ft. 52 lbs. 26 lbs.

12 .75 in. (19.1 mm) 1.125 in. (28.6 mm) 200 PSI 120 PSI 200 ft. 100 ft. 60 lbs. 30 lbs.

16 1 in. (25.4 mm) 1.375 in. (34.9 mm) 150 PSI 85 PSI 200 ft. 100 ft. 76 lbs. 38 lbs.

20 1.25 in. (31.8 mm) 1.750 in. (44.5 mm) 125 PSI 75 PSI 100 ft. 50 ft. 64 lbs. 32 lbs.

24 1.5 in. (38.1 mm) 2 in. (50.8 mm) 100 PSI 65 PSI 100 ft. 50 ft. 75 lbs. 38 lbs.


99

Tigerflex Food Grade Hose

Series WTHeavy Duty PVC Food Grade Material Handling Hose for Dry Applications

Kuriyama's WT series hose is made of crystal clear PVC, formulated to meet all applicable FDA, USDA and 3A regu-lations. Its smooth-bore construction eliminates material buildup, while the clear walls permit visual confirmation ofproduct flow. A convoluted cover design provides increased flexibility. Its applications include food transfer systems,poultry cleaning operations, or pneumatic conveying systems for powder, pellet or granular materials. ServiceTemperature Range: -4°F to 150°F.

Series WEHeavy Duty PVC Food Grade Material Handling Hose, Embedded Static Wire, for Dry Applications

Kuriyama's WE series hose is made of crystal clear PVC, formulated to meet all applicable FDA and USDA regula-tions. It features an embedded static wire that prevents the buildup of static electricity and smooth-bore construction tokeep material flowing smoothly. The clear walls permit visual confirmation of product flow. A convoluted cover designprovides increased flexibility. Its applications include paper mill vacuum lines or pneumatic conveying systems forpowder, pellet or granular materials. Service Temperature Range: -4°F to 150°F.

RSC # Mfg. No. Nominal ID Nominal OD Working Pressure Vacuum Rating (HG) Min. BendRadius, 68° F Std. Length Appr. Wt.

68° F 104° F 68° F 104° F

83201720 WT100 1 in. (25.4 mm) 1.3 in. (33 mm) 55 PSI 30 PSI 28" HG 28" HG 2 in. 100/50 ft. .21 lb./ft.

WT125 1.25 in. (31.7 mm) 1.6 in. (40.6 mm) 50 PSI 25 PSI 28" HG 28" HG 2 in. 100/50 ft. .28 lb./ft.

83201724 WT150 1.5 in. (38.1 mm) 1.92 in. (48.8 mm) 50 PSI 25 PSI 28" HG 28" HG 3 in. 100/50 ft. .35 lb./ft.

WT200 2 in. (50.8 mm) 2.40 in. (61.0 mm) 40 PSI 20 PSI 28" HG 24" HG 4 in. 100/50 ft. .56 lb./ft.

83201728 WT250 2.5 in. (63.5 mm) 2.99 in. (75.9 mm) 40 PSI 20 PSI 28" HG 24" HG 5 in. 100/50 ft. .77 lb./ft.

WT300 3 in. (76.2 mm) 3.64 in. (92.5 mm) 40 PSI 20 PSI 28" HG 24" HG 6 in. 100/50 ft. 1.10 lb./ft.

WT350 3.5 in. (88.9 mm) 4.21 in. (106.9 mm) 35 PSI 18 PSI 28" HG 24" HG 8 in. 100/50 ft. 1.40 lb./ft.

WT400 4 in. (101.6 mm) 4.72 in. (119.9 mm) 35 PSI 18 PSI 24" HG 22" HG 10 in. 100/50 ft. 1.81 lb./ft.

83201736 WT500 5 in. (127 mm) 5.74 in. (145.8 mm) 35 PSI 18 PSI 24" HG 22" HG 16 in. 100/20 ft. 2.36 lb./ft.

WT600 6 in. (152.4 mm) 6.81 in. (173 mm) 30 PSI 15 PSI 24" HG 22" HG 18 in. 100/50/20 ft. 3.54 lb./ft.

WT800 8 in. (203.2 mm) 8.85 in. (224.8 mm) 20 PSI 10 PSI 20" HG 18" HG 36 in. 20 ft. 5.10 lb./ft.

WT45M 1.73 in. (44 mm) 2.09 in. (53 mm) 45 PSI 25 PSI 28" HG 24" HG 4 in. 50 ft. .44 lb./ft.

WT57M 2.20 in. (56.0 mm) 2.63 in. (66.7 mm) 40 PSI 22 PSI 28" HG 24" HG 5 in. 50 ft. .62 lb./ft.


68° F 104° F 68° F 104° F

WE125 1.25 in. (32 mm) 1.65 in. (42 mm) 50 PSI 25 PSI 28" HG 28" HG 4 in. 60/50 ft. .32 lb./ft.

WE150 1.5 in. (38.1 mm) 1.93 in. (49.0 mm) 50 PSI 25 PSI 28" HG 28" HG 4 in. 60/50 ft. .43 lb./ft.

83201632 WE200 2 in. (50.8 mm) 2.4 in. (61 mm) 40 PSI 20 PSI 28" HG 24" HG 4 in. 60/50 ft. .58 lb./ft.

WE250 2.5 in. (63.5 mm) 2.99 in. (75.9 mm) 40 PSI 20 PSI 28" HG 24" HG 5 in. 60/50 ft. .88 lb./ft.

83201648 WE300 3 in. (76.2 mm) 3.64 in. (92.5 mm) 40 PSI 20 PSI 28" HG 24" HG 6 in. 60/50 ft. 1.25 lbs./ft.

83201664 WE400 4 in. (101.6 mm) 4.72 in. (120 mm) 35 PSI 18 PSI 24" HG 20" HG 10 in. 60/50 ft. 1.93 lbs./ft.

WE500 5 in. (127 mm) 5.74 in. (146.0 mm) 30 PSI 15 PSI 24" HG 20" HG 16 in. 60/50/20 ft. 2.40 lb./ft.

83201696 WE600 6 in. (152.4 mm) 6.81 in. (175.5 mm) 30 PSI 15 PSI 24" HG 20" HG 18 in. 60/50/20 ft. 3.70 lbs./ft.

WE45M 1.73 in. (44 mm) 2.09 in. (53 mm) 45 PSI 25 PSI 28" HG 24" HG 4 in. 60 ft. .46 lb./ft.

WE57M 2.2 in. (56 mm) 2.63 in. (66.7 mm) 40 PSI 22 PSI 28" HG 24" HG 5 in. 60 ft. .64 lb./ft.

100

Tigerflex PVC Hoses

Series FTHeavy Duty PVC Food Grade Material Handling Hose for Dry or Liquid Applications

Kuriyama's FT series hose is made of clear PVC, formulated to meet all applicable FDA, USDA and 3A regulations. Itssmooth-bore construction eliminates material buildup, while the clear walls permit visual confirmation of product flow.A smooth cover design makes clamping easier. Its applications include transfer of liquid or dry dairy products, fishsyrup or juice transfer, fish processing equipment, poultry cleaning operations, or pneumatic conveying systems forpowder, pellet or granular materials. Service Temperature Range: -4°F to 150°F.

Series GTLight Duty PVC Dust Collection and Blower Hose

Kuriyama's GT series hose is made of clear PVC with a grey helix, allowing visual confir-mation of product flow. A smooth bore construction eliminates material buildup, while theexternal helix design provides excellent flexibility and handling. Its applications include dust collection, fume removal,aire vent lines, material chutes or air seeder lines. Service Temperature Range: -4°F to 150°F.


68° F 104° F 68° F 104° F

FT075 .75 in. (19 mm) 0.94 in. (24 mm) 115 PSI 75 PSI Full 28" HG 3 in. 100 ft. .17 lb./ft.

FT100 1 in. (25.5 mm) 1.28 in. (32.5 mm) 100 PSI 70 PSI Full 28" HG 3 in. 100 ft. .24 lb./ft.

83201610 FT125 1.25 in. (32 mm) 1.56 in. (39.5 mm) 90 PSI 65 PSI Full 28" HG 4 in. 100 ft. .44 lb./ft.

FT150 1.5 in. (38.1 mm) 1.8 in. (46.5 mm) 85 PSI 60 PSI Full 28" HG 6 in. 100 ft. .50 lb./ft.

83201754 FT200 2 in. (50.8 mm) 2.36 in. (60 mm) 85 PSI 60 PSI Full 26" HG 8 in. 100 ft. .71 lb./ft.

FT250 2.5 in. (63.5 mm) 2.88 in. (73.2 mm) 65 PSI 45 PSI Full 26" HG 10 in. 100 ft. .94 lb./ft.

83201630 FT300 3 in. (76.2 mm) 3.42 in. (86.9 mm) 55 PSI 40 PSI Full 24" HG 11 in. 100 ft. 1.14 lbs./ft.

83201764 FT400 4 in. (101.6 mm) 4.51 in. (114.6 mm) 50 PSI 35 PSI Full 24" HG 18 in. 100/60 ft. 1.91 lbs./ft.

FT500 5 in. (127.0 mm) 5.51 in. (140 mm) 40 PSI 25 PSI 28" HG 23" HG 28 in. 100 ft. 2.41 lb./ft.

FT600 6 in. (153.4 mm) 6.59 in. (167.4 mm) 30 PSI 20 PSI 28" HG 15" HG 48 in. 100 ft. 3.28 lb./ft.

FT800 8 in. (204.7 mm) 8.85 in. (224.8 mm) 25 PSI 15 PSI 28" HG 10" HG 60 in. 100 ft. 5.57 lb./ft.


68° F 104° F 68° F 104° F

GT150 1.5 in. (38.1 mm) 1.82 in. (46.2 mm) 20 PSI 7 PSI 22" HG 14" HG 1 in. 100/50 ft. .23 lb./ft.

GT200 2 in. (50.8 mm) 2.39 in. (60.7 mm) 15 PSI 6 PSI 21" HG 12" HG 2 in. 100/50 ft. .32 lb./ft.


GT300 3 in. (76.2 mm) 3.46 in. (87.9 mm) 10 PSI 5 PSI 18" HG 10" HG 3 in. 100/50 ft. .50 lb./ft.


83201504 GT400 4 in. (101.6 mm) 4.5 in. (114.3 mm) 8 PSI 4 PSI 13" HG 7" HG 3 in. 100/50 ft. .77 lb./ft.

GT500 5 in. (127 mm) 5 in. (127 mm) 7 PSI 3 PSI 10" HG 6" HG 5 in. 100/50 ft. .91 lb./ft.

83201506 GT600 6 in. (152.4 mm) 6.54 in. (166.1 mm) 6 PSI 3 PSI 7" HG 5" HG 6 in. 100/50 ft. 1.07 lb./ft.

GT800 8 in. (203.2 mm) 8.59 in. (217.4 mm) 4 PSI 2 PSI 5" HG 3" HG 8 in. 50 ft. 1.74 lb./ft.

GT1000 10 in. (254 mm) 11.68 in. (296.6 mm) 2 PSI -- 2" HG -- 10 in. 50 ft. 2.70 lb./ft.

101

Kuri Tec Air and Water Hose

Series K1131PolyAir Multi-Purpose Air and Water Hose

Kuriyama's K1131 series hose is made of a high quality flexiblePVC compound uniquely blended to look and fee likecomparablerubber hose. It even stays flexible at low temperatures, and itslight weight makes it an ideal hose for air tool applications. Thetube is made of a black PVC compound, reinforced with spiralpolyester yarn and additional longitudinal yarns that reduce elongation under pressure. The non-marking pinprickedcover is made of a yellow PVC compound. This hose is UV and weather-resistant, chemical resistant, and oil-resistant(medium-high, compliant with RMA's Class B), and its core and cover are silicone-free. Service Temperature Range:-15°F to 150°F.

RSC # Size Code Nominal ID Nominal OD Working Pressure Standard Lengths Approx. Weight70° F 122° F Reel Coil Reel Coil

04 .25 in. (6.5 mm) .5 in. (12.7 mm) 300 PSI 180 PSI 500 ft. 100 ft. 44 lbs. 8 lbs.05 .3125 in. (8 mm) .625 in. (15.9 mm) 300 PSI 180 PSI 500 ft. 100 ft. 67 lbs. 13 lbs.06 .375 in. (9.5 mm) .625 in. (15.9 mm) 300 PSI 180 PSI 500 ft. 100 ft. 58 lbs. 11 lbs.08 .5 in. (12.7 mm) .813 in. (20.7 mm) 300 PSI 180 PSI 500 ft. 100 ft. 93 lbs. 18 lbs.10 .625 in. (15.9 mm) .906 in. (23 mm) 250 PSI 125 PSI 300 ft. 100 ft. 64 lbs. 19 lbs.

81503200 12 .75 in. (19 mm) 1.125 in. (28.6 mm) 250 PSI 100 PSI 300 ft. 100 ft. 96 lbs. 30 lbs.


102

Low PressureHose

SS25UL SeriesRecommended for:Liquefied petroleum gas (LPG) within the specified temperature range. ULListed, Standard 21. Takes reusable 20 and 22 Series Fittings.


Construction:Tube: Synthetic rubber.Reinforcement: Textile inner braid with stainless steel wire braid reinforcement.Cover: Black textile braid cover with white helical identification stripe.

881 SeriesApplications/Temperature Ranges:Low pressure, suction or return lines for use with:

Petroleum-based hydraulic fluids and lubricating oils: -40°F to 257°F (-40°C to 125°C) Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C) Air: -40°F to 158°F (-40°C to 70°C)

Construction:Tube: Synthetic rubber.Reinforcement: Two textile braids or a woven ply, combined with wire spiraled throughout.Cover: MHSA accepted synthetic rubber.

RSC # Mfg. No. Hose ID Hose OD Working Pressure Burst Pressure Min. Bend Radius Approx. Weight

PSI MPA PSI MPA inch mm lbs./ft. kg/m

SS25UL-4 3/16 in. (5 mm) 0.52 in. (13 mm) 350 2.4 1750 12 1-1/2 38 0.11 0.16

SS25UL-5 1/4 in. (6.3 mm) 0.58 in. (15 mm) 350 2.4 1750 12 1-3/4 44 0.13 0.19

74100706 SS25UL-6 5/16 in. (8 mm) 0.68 in. (17 mm) 350 2.4 1750 12 2 50 0.18 0.27

SS25UL-8 13/32 in. (10 mm) 0.77 in. (20 mm) 350 2.4 1750 12 2-5/16 59 0.21 0/31

SS25UL-10 1/2 in. (12.5 mm) 0.92 in. (23 mm) 350 2.4 1750 12 2-3/4 70 0.29 0.43

SS25UL-10 5/8 in. (16 mm) 1.08 in. (27 mm) 350 2.4 1750 12 3-1/4 82 0.37 0.55

RSC # Mfg. No. Hose ID Hose OD Working Pressure Burst Pressure Min. Bend Radius Approx. Weight Vacuum Rating

PSI MPA inch mm inch mm lbs./ft. kg/m In., Hg kPa, abs

74100412 881-12 3/4 in. (19 mm) 1.20 in. (30 mm) 300 2.1 1200 8 5 130 0.50 0.74 28 6

881-16 1 in. (25 mm) 1.49 in. (38 mm) 250 1.7 1000 7 6 150 0.60 0.89 28 6

74100420 881-20 1-1/4 in. (31.5 mm) 1.78 in. (45 mm) 200 1.4 800 6 8 200 0.89 1.32 28 6

74100424 881-24 1-1/2 in. (38 mm) 2.06 in. (52 mm) 150 1 600 4 10 250 1.11 1.65 28 6

881-32 2 in. (51 mm) 2.48 in. (63 mm) 100 0.7 40 3 12 300 1.27 1.89 28 6

103

Low PressureHose

811 SeriesApplications/Temperature Ranges:Low pressure, suction or return lines for use with:

Petroleum-based hydraulic fluids and lubricating oils: -40°F to 212°F (-40°C to 100°C) Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C) Air: -40°F to 158°F (-40°C to 70°C)

Construction:Tube: Synthetic rubber.Reinforcement: Two textile braids or a woven ply, combined with wire spiraled throughout.Cover: MHSA accepted synthetic rubber.


PSI MPA inch mm inch mm lbs./ft. kg/m In., Hg kPa, abs

811-12 3/4 in. (19 mm) 1.20 in. (30 mm) 300 2.1 1200 8 5 130 0.50 0.74 28 6

74100416 811-16 1 in. (25 mm) 1.49 in. (38 mm) 250 1.7 1000 7 6 150 0.60 0.89 28 6

811-20 1-1/4 in. (31.5 mm) 1.78 in. (45 mm) 200 1.4 800 6 8 200 0.89 1.32 28 6

811-24 1-1/2 in. (38 mm) 2.06 in. (52 mm) 150 1 600 4 10 250 1.11 1.65 28 6

74100432 811-32 2 in. (51 mm) 2.48 in. (63 mm) 100 0.7 40 3 12 300 1.27 1.89 28 6

104

Low PressurePush-Lok Hose

801 Push-Lok SeriesApplications/Temperature Ranges:Widely used for shop air systems and general industrial, mainte-nance and automotive applications, such as:

Petroleum-based hydraulic fluids and lubricating oils: -40°F to 212°F (-40°C to 100°C)Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C)Air: -40°F to 158°F (-40°C to 70°C)

Construction:Tube: Synthetic rubber.Reinforcement: One textile braid.Cover: Synthetic rubber, available in gray, red, yellow, black, green and blue.

821 Push-Lok SeriesApplications/Temperature Ranges:Widely used for shop air systems and general industrial, mainte-nance and automotive applications, such as:

Petroleum-based hydraulic fluids and lubricating oils: -40°F to 212°F (-40°C to 100°C)Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C)Air: -40°F to 158°F (-40°C to 70°C)

Construction:Tube: Synthetic rubber.Reinforcement: One textile braid.Cover: Textile braid cover.


PSI MPA PSI MPA inch mm lbs./ft. kg/m In., Hg kPa, abs

74101404 801-4 1/4 in. (6.3 mm) 0.50 in. (13 mm) 250 1.7 1000 7 2-1/2 65 0.09 0.13 28 6

74101406 801-6 3/8 in. (10 mm) 0.63 in. (16 mm) 250 1.7 1000 7 3 75 0.11 0.16 28 6

74101408 801-8 1/2 in. (12.5 mm) 0.78 in. (20 mm) 250 1.7 1000 7 5 130 0.18 0.27 28 6

74101410 801-10 5/8 in. (16 mm) 0.91 in. (23 mm) 250 1.7 1000 7 6 150 0.19 0.28 15 50

74101412 801-12 3/4 in. (19 mm) 1.03 in. (26 mm) 250 1.7 1000 7 7 180 0.24 0.36 15 50



74101504 821-4 1/4 in. (6.3 mm) 0.50 in. (13 mm) 350 2.4 1400 10 2-1/2 65 0.06 0.07 28 6

74101506 821-6 3/8 in. (10 mm) 0.63 in. (16 mm) 300 2.1 1200 8 3 75 0.09 0.13 28 6

74101508 821-8 1/2 in. (12.5 mm) 0.78 in. (20 mm) 300 2.1 1200 8 5 130 0.12 0.18 28 6

821-10 5/8 in. (16 mm) 0.91 in. (23 mm) 250 1.7 1000 7 6 150 0.19 0.28 28 6

821-12 3/4 in. (19 mm) 1.03 in. (26 mm) 250 1.7 1000 7 7 180 0.21 0.31 28 6

105

MediumPressure Hoses

201 SeriesApplications/Temperature Ranges:Petroleum-based hydraulic fluids and lubricating oils, diesel fuels,crude fuel, oils and anti-freeze solutions: -40°F to 302°F (-40°C to 150°C)Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C)Air: -40°F to 158°F (-40°C to 70°C)

Construction:Tube: Synthetic rubber.Reinforcement: Textile inner braid, high tensile steel wire braid reinforcement.Cover: Textile braid.

421 SeriesApplications/Temperature Ranges:Petroleum-based hydraulic fluids and lubricating oils: -40°F to257°F (-40°C to 125°C)Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C)Air: -40°F to 158°F (-40°C to 70°C). For air or gas applications above 250 psi, the cover should be pin-pricked

Construction:Tube: Synthetic rubber tube.Reinforcement: One braid of high tensile steel wire reinforcement.Cover: MSHA accepted gray synthetic rubber cover.



201-4 3/16 in. (5 mm) 0.52 in. (13 mm) 3000 20.7 12000 83 3 75 0.15 0.22 28 6

201-5 1/4 in. (6.3 mm) 0.58 in. (15 mm) 3000 20.7 12000 83 3-3/8 85 0.18 0.27 28 6

201-6 5/16 in. (8 mm) 0.68 in. (17 mm) 2250 15.5 9000 62 4 100 0.23 0.34 28 6

201-8 13/32 in. (10 mm) 0.77 in. (20 mm) 2000 13.8 8000 55 4-5/8 120 0.27 0.40 28 6

73000510 201-10 1/2 in. (12.5 mm) 0.92 in. (23 mm) 1750 12.0 7000 48 5-1/2 140 0.37 0.55 28 6

74100512 201-12 5/8 in. (16 mm) 1.08 in. (27 mm) 1500 10.3 6000 41 6-1/2 165 0.46 0.68 28 6

74100516 201-16 7/8 in. (22 mm) 1.23 in. (31 mm) 800 5.5 3200 22 7-3/8 185 0.46 0.68 20 34

74100520 201-20 1-1/8 in. (29 mm) 1.50 in. (38 mm) 625 4.3 2500 17 9 230 0.51 0.76 20 34

201-24 1-3/8 in. (35 mm) 1.75 in. (44 mm) 500 3.5 2000 14 10-1/2 265 0.68 1.01 15 50

201-32 1-13/16 in. (46 mm) 2.22 in. (56 mm) 350 2.4 1400 10 13-1/4 335 0.89 1.32 11 64

201-40 2-3/8 in. (61 mm) 2.88 in. (73 mm) 350 2.4 1400 10 24 610 1.31 1.45 11 64

201-48 3 in. (77 mm) 3.56 in. (90 mm) 200 1.4 800 6 33 840 2.09 3.11 11 64



421-3 3/16 in. (5 mm) 0.46 in. (12 mm) 3000 20.7 12000 83 3-1/2 90 0.13 0.19

74100104 421-4 1/4 in. (6.3 mm) 0.53 in. (13 mm) 2750 19 11000 76 4 100 0.16 0.24

421-5 5/16 in. (8 mm) 0.59 in. (15 mm) 2500 17.2 10000 69 4-1/2 115 0.18 0.27

421-6 3/8 in. (10 mm) 0.68 in. (17 mm) 2250 15.5 9000 62 5 130 0.23 0.34

421-8 1/2 in. (12.5 mm) 0.81 in. (20 mm) 2000 13.8 8000 55 7 180 0.29 0.43

421-10 5/8 in. (16 mm) 0.94 in. (24 mm) 1500 10.3 6000 41 8 200 0.33 0.49

421-12 3/4 in. (19 mm) 1.09 in. (28 mm) 1250 8.6 5000 35 9-1/2 240 0.42 0.63

421-16 1 in. (25 mm) 1.40 in. (36 mm) 1000 6.9 4000 28 12 300 0.63 0.94

421-20 1-1/4 in. (31.5 mm) 1.73 in. (44 mm) 625 4.3 2500 17 16-1/2 420 0.80 1.19

421-24 1-1/2 in. (38 mm) 1.93 in. (49 mm) 500 3.5 2000 14 20 500 1.00 1.49

421-32 2 in. (51 mm) 2.50 in. (64 mm) 375 2.6 1500 10 25 630 1.50 2.23

106

302/301 SeriesApplications/Temperature Ranges:Petroleum-based hydraulic fluids and lubricating oilss: -40°F to 257°F (-40°C to 125°C)Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C)Air: -40°F to 158°F (-40°C to 70°C). For air above 250 PSI (1.7 MPa), the covershould be pin -pricked.

Construction:Tube: Synthetic rubber.Reinforcement: Two braids of high tensile steel wire reinforcement.Cover: MSHA-accepted synthetic rubber.

High PressureHose

772 SeriesApplications/Temperature Ranges:Petroleum-based hydraulic fluids and lubricating oils: -40°F to257°F (-40°C to 125°C)Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C)Air: -40°F to 158°F (-40°C to 70°C)

Construction:Tube: Synthetic rubber tube.Reinforcement: Four spirals of high tensile steel wire.Cover: MSHA accepted gray synthetic rubber cover.



772-6 3/8 in. (9.5 mm) 0.79 in. (20 mm) 4000 27.5 16000 110 5 130 0.40 0.60

772-8 1/2 in. (12.5 mm) 0.93 in. (25 mm) 4000 27.5 16000 110 7 180 0.62 0.93

772-10 5/8 in. (15.9 mm) 1.07 in. (27.3 mm) 4000 27.5 16000 110 8 200 0.62 0.94

772-12 3/4 in. (19 mm) 1.21 in. (31 mm) 4000 27.5 16000 110 9-1/2 240 0.94 1.40

772-16 1 in. (25 mm) 1.50 in. (38 mm) 4000 27.5 16000 110 12 300 1.34 1.99

772-20 1-1/4 in. (31.5 mm) 1.85 in. (47 mm) 3000 20.7 12000 83 16-1/2 420 1.74 2.59

772-24 1-1/2 in. (38 mm) 2.10 in (53 mm) 2500 17.2 10000 69 20 500 2.01 2.99

772-32 2 in. (51 mm) 2.63 in. (67 mm) 2500 17.2 10000 69 25 630 2.75 4.09



301-4 1/4 in. (6.3 mm) 0.59 in. (15 mm) 5000 34.5 20000 138 4 100 0.26 0.39

301-6 3.8 in. (10 mm) 0.75 in. (19 mm) 4000 27.5 16000 110 5 130 0.37 0.55

301-8 1/2 in. (12.5 mm) 0.88 in. (22 mm) 3500 24 14000 96 7 180 0.45 0.67

301-10 5/8 in. (16 mm) 1 in. (25 mm) 2750 19 11000 76 8 200 0.52 0.77

301-12 3/4 in. (19 mm) 1.16 in. (30 mm) 2250 15.5 9000 62 9-1/2 240 0.67 1

301-16 1 in. (25 mm) 1.50 in. (38 mm) 2000 13.8 8000 55 12 300 1 1.49

301-20 1-1/4 in. (31.5 mm) 1.89 in. (48 mm) 1625 11.2 6500 45 16-1/2 420 1.16 1.73

301-24 1-1/2 in. (38 mm) 2.16 in. (55 mm) 1250 8.6 5000 35 20 500 1.44 2.14

301-32 2 in. (51 mm) 2.66 in. (68 mm) 1125 7.8 4500 31 25 630 1.99 2.96

107

High PressureHoses

381 SeriesApplications/Temperature Ranges:Petroleum-based hydraulic fluids and lubricating oils: -40°F to 212°F (-40°C to100°C)Water, water/glycol and water/oil emulsion hydraulic fluids: up to 185°F (85°C)Air: -40°F to 158°F (-40°C to 70°C). For air or gas applications above 250 psi, the cover should be pin-pricked

Construction:Tube: Synthetic rubber tube.Reinforcement: Two braids of special high tensile steel wire reinforcement.Cover: MSHA accepted synthetic rubber cover.



381-4 1/4 in. (6.3 mm) 0.59 in. (15 mm) 5800 40 23200 160 4 100 0.26 0.39

381-5 5/16 in. (8 mm) 0.66 in. (17 mm) 5075 35 20300 140 4-1/2 115 0.28 0.42

381-6 3/8 in. (10 mm) 0.75 in. (19 mm) 5000 34.5 20000 138 5 130 0.37 0.55

381-8 1/2 in. (12.5 mm) 0.88 in. (22 mm) 4250 29.3 17000 117 7 180 0.45 0.67

381-10 5/8 in. (16 mm) 1 in. (25 mm) 3600 25 14500 100 8 200 0.52 0.77

381-12 3/4 in. (19 mm) 1.16 in. (30 mm) 3100 21.5 12400 86 9-1/2 240 0.67 1

381-16 1 in. (25 mm) 1.50 in. (38 mm) 2500 17.2 10000 69 12 300 1 1.49

381-20 1-1/4 in. (31.5 mm) 1.89 in. (48 mm) 2250 15.5 9000 62 16-1/2 420 1.16 1.73

381-24 1-1/2 in. (38 mm) 2.16 in. (55 mm) 1750 12 7000 48 20 500 1.44 2.14

381-32 2 in. (51 mm) 2.66 in. (68 mm) 1250 8.6 5000 35 25 630 1.99 2.96

108

Dry Bulk

UltraFlex HoseHose Master's UltraFlex is a smoothbore hose ideally suited for dry bulkpneumatic conveying. It is produced with a durable armor and a higly abra-sion-resistant liner. Hose Master's precision manufacturing process makesUltraFlex unequaled in strength and flexibility. Smoothbore hose is availablein any length and can be provided in bulk or fabricated assemblies.

Applications:Brewing, cement, food processing, mining, plastic, grain unloading systems,clinker and product handling, product conveying, coal transfer, pneumaticpellet systems.

Construction Options:Diameters: 1-1/2" through 16".Armor Materials: Aluminum, galvanized steel, T304 stainless steel, T316 stainless steel.Armor Strip: Light weight, medium weight, light heavy weight, heavy weight.Liner Materials: T301 stainless steel, T410 stainless steel, carbon steel.Packing Materials: Cotton, elastomeric, copper, high temperature fiber, stainless steel (unpacked also available).Cover: Synthetic rubber, available in gray, red, yellow, black, green and blue.

Cam &GrooveFittings

109

RSC # Size Part #83403008 3/4" PPA7583403016 1" PPA10083403024 1-1/2" PPA15083403032 2" PPA20083403048 3" PPA300

83403124 1-1/2" PPB15083403132 2" PPB200

83403316 1" PPC10083403324 1-1/2" PPC15083403332 2" PPC200

83403408 3/4" PPD7583403424 1-1/2" PPD15083403432 2" PPD20083403448 3" PPD300

83403524 1-1/2" PPE15083403532 2" PPE200

83403624 1-1/2" PPF15083403632 2" PPF20083403648 3" PPF300

83403816 1" PPP10083403848 3" PPP300

83403860 2" PPH200

Type A: Male Adapter x Female NPT

Type B: Female Coupler x Male NPT

Type C: Female Coupler x Hose Shank

Type D: Female Coupler x Female NPT

Type E: Male Adapter x Hose Shank

Type F: Male Adapter x Male NPT

Type P: Dust Plug

Type H: Dust Cap

Polypropylene FittingsThese polypropylene couplers and adapters are recommended for a maximum working pressure of 125 psi (1/2" to1"), 100 psi (1-1/4" to 2") and 75 psi (3"). The recommendations are based on the use of mating Dixon fittings at anambient temperature of 70°F with a standard seal installed. Each of these fittings is manufactured from a glass-filledpolypropylene. The couplers are supplied with EPR gaskets, 304 stainless steel handles and pins. Each of them isshipped 24 per package. (NOTE: The coupler and adapters of the 1-1/4" size use the standard 1-1/2" body size. Thecoupler and adapter portions of the 1/2" size use 3/4" standard body size.)

BossCouplings

110

Shank X NPT RSC # Part #1/4" 83504601 GF13/8" 83504603 GF31/2" 83504606 GF63/4" 83504626 GF261" 83504636 GF361-1/2" 83504661 GF612" 83504681 GF812-1/2" 83504696 GF963" 83504711 GF111

3/4" (50/pkg.) 83504506 GB6

3/8" (100/pkg.) 83504501 GCC1/2" 83504503 GB33/4" (50/pkg.) 83504508 GB81" 83504513 GB131-1/2" (25/pkg.) 83504523 GB232" (10/pkg.) 83504528 GB282-1/2" (5/pkg.) 83504533 GB33

3/4" 83504730 GM8

2" 83501181 RGF81

EZ-Boss Ground Joint Seal CouplingsThe leakproof seal in the Boss Coupling is affected in the Ground Joint Style by a soft-to-hard-polymer connectionwhen the rounded head of the Stem is in firm contact with the beveled polymer insert in the Spud. Job downtime toreplace lost or deteriorated washers is eliminated, and the sealing efficiency is not affected by dirt, grime or by normalwear through repeated use. Recommended for steam service up to 450°F; easy to seal; works with existing BossGround Joint Stems. Use with Boss Clamps. Made in the USA of plated steel and/or malleable iron.

Coupling with Female Spud

Stem

Female Spud

Male Spud

STAINLESS STEELCoupling with Female Stud

BossCouplings

111

Washer Seal CouplingsIn the Washer Type coupling, the seal is made by a Klinger nylon, Nitrile bonded, Kevlar reinforced washer betweenwide flat surfaces on the Stem and Spud. A tight connection is made, without turning the hose, by rotating the Wing Nutand hammering it tight. The washer type is the original Boss coupling, superseded by the Boss Ground Joint coupling,providing a Ground Joint Seal in place of a Washer Type seal.

Shank X NPT RSC # Part #3/8" 83504003 WF31/2" 83504006 WF63/4" 83504026 WF261" 83504036 WF361-1/4" 83504051 WF511-1/2" 83504061 WF612" 83504081 WF812-1/2" 83504096 WF96

3/8" (100/pkg.) 83504908 CB3/4" (25/pkg.) 83504912 B122-1/2" (5/pkg.) 83504932 B32

3/4" (25/pkg.) 83504208 B81" (50/pkg.) 83504213 B131-1/4" (25/pkg.) 83504218 B181-1/2" 83504223 B232" (10/pkg.) 83504228 B282-1/2" (5/pkg.) 83504233 B333" 83504238 B38

n/a 83504413 W12n/a 83504427 W27

Coupling with Female Spud

Wing Nut

Female Spud

WasherKlinger nylon, Nitrile bonded,Kevlar reinforced material.

Boss Hose MenderCollars to engage grip fingers of Boss Clamps. Item M1 is made of plated steel, while Items M6 and M21 are made ofplated malleable iron.

RSC # Size Part #83504301 1/2" M183504306 3/4" M683504321 1-1/2" M21

BossCouplings

112

RSC # Hose ID Hose OD Part # Qty. Torque83501600 3/8" 44/64" to 56/64" CD 100 683501601 1/2" 52/64" to 60/64" DD 100 683501604 1/2" 60/64" to 1-4/64" B4 25 1283501605 1/2" 1-4/64" to 1-12/64" B5 25 1283501608 3/4" 1-12/64" to 1-20/64" BU9 50 2183501609 3/4" 1-20/64" to 1-32/64" B9 25 2183501610 3/4" 1-32/64" to 1-44/64" B10 25 21

83501613 1" 1-34/64" to 1-46/64" BU14 25 2183501614 1" 1-44/64" to 1-60/64" B14 25 2183501615 1" 1-60/64" to 2-8/64" B15 20 2183501619 1-1/4" 2-8/64" to 2-24/64" B19 10 4083501624 1-1/2" 2-24/64" to 2-36/64" B24 10 4083501625 1-1/2" 2-36/64" to 2-48/64" B25 10 4083501629 2" 2-48/64" to 3-4/64" B29 10 6083501634 2-1/2" 3-32/64" to 3-60/64" B34 5 15083501639 3" 4-4/64" to 4-28/64" B39 5 200

83502018 1-1/4" 1-44/64" to 1-56/64" 187 10 2183502020 1-1/4" 1-56/64" to 2-4/64" 206 20 2183502021 1-1/2" 2 to 2-8/64" 212 10 2183502022 1-1/2" 2-4/64" to 2-16/64" 225 10 4083502025 2" 2-16/64" to 2-32/64" 250 10 4083502027 2" 2-32/64" to 2-48/64" 275 10 4083502035 2-1/2" 3-4/64" to 3/32-64" 350 5 6083502037 3" 3-32/64" to 3/48/64" 375 5 6083502040 3" 3-48/64" to 4" 401 5 150

Two-Bolt Boss Clamps

Two-Bolt Boss Clamps withFour Gripping Fingers

Four-Bolt Boss Clamps withTwo Gripping Fingers

ClampsThe bolts used in the Boss interlocking clamps are not standard bolts. They vary from standard bolts in their length,diameter, overall thread length and material hardness. These bolts can be retorqued, but it is not recommended thatthey be reused, as they are designed for a single bend only. Dixon recommends only factory-supplied replacementbolts. Recommended torque rating is given in FT. LBS. Bolts are made of plated malleable iron.

BossCouplings

113

Male StemsRSC # Hose X NPT Part # Qty.83504799 1/4" X 1/4" MSA 5083504800 3/8" X 3/8" MSC 10083504802 3/8" X 1/2" MS6X8 2583504801 1/2" X 1/2" MS1 2583504806 3/4" X 3/4" MS6 2583504811 1" X 1" MS11 25

83504816 1-1/4" MS16 2083504821 1-1/2" MS21 2083504826 2" MS26 1083504831 2-1/2" MS31 583504836 3" MS36 5

Steel Bar Stock

Malleable Iron

King 4-Lug Quick-Acting CouplingsFor water service only. Not to be used for steam service. Safety clips are the same size for both 2-lug and 4-lugUniversal Couplings, to be used with all Universal Coupling applications.

RSC # Size Part #83502221 1-1/2" AM2183502226 2" AM26

83502414 n/a Rubber/AWR14

Malleable Iron Couplings

Washers for 4-Lug

Hose End

Female NPT End

Air KingCouplings

114

UniversalCouplingsUSA-made Air King couplings are forair service only, rated for 110 PSI.

RSC # Size Part # Qty.83502105 3/8" AMH 2583502201 1/2" AM1 5083502205 5/8" AM5 5083502206 3/4" AM6 5083501006 3/4" St. Steel RAM6 5083502211 1" AM11 50

83502101 1/4" AMB1 2583502102 3/8" AMB 2583502202 1/2" AM2 5083501002 1/2" St. Steel RAM2 5083502207 3/4" AM7 5083501007 3/4" St. Steel RAM7 5083502212 1" AM12 50

83502103 1/4" AMC1 2583502104 3/8" AMC 2583502203 1/2" AM3 5083501003 1/2" St. Steel RAM3 5083502208 3/4" AM8 5083501008 3/4" St. Steel RAM8 5083502213 1" AM13 50

83502106 n/a AMO 25

83502210 n/a AM10 25

Hose Ends

Male NPT Ends

Female NPT Ends

Blank Ends

Triple Connections

AccessoriesThe use of an Air King Safety Clip orwire-type retainer is necessary toassure Air King UniversalCouplings will not becomeaccidentally disconnected. Aproper connection is guaran-teed because the pin will notgo through the holes in themating flanges until couplingsare locked in place.

RSC # Desc. Part # Qty.83502301 Standard Safety Clip AC1 25

83502308 Lanyard, synthetic cord ACL8 25

83502404 Rubber Washer, -20° to 160° F AWR4 5083502506 Neoprene Washer, -20° to 190° F AWS6 50

83501602 3/4" Air King Clamp, Torque-12 A9 50Hose OD is 1-8/64" to 1-20/64"

Dix-LockCouplings

115

Quick-Acting CouplingsDix-Lock Couplings are rated to 300 PSI, and it takes a minimum of 5 PSI to get a positive seal.

RSC # Size Part #83503704 3/4" QM4

83503743 3/4" QM43

83503723 3/4" QM23

83503762 1/2" QM62

83502530 n/a QBM2

Male Head X Hose End

Male Head X Male NPT End

Female Head X Hose End

Female Head X Male NPT End

Dix-Lock Gaskets (Buna-N)

Air Coupling, Hose End Barb with Locking SleeveThis zinc-coated, plated steel coupling is especially designed for pneumatic air tools, witha spring-loaded interlocking engagement and 300 PSI working pressure. A full openingpermits full-line pressure to the tool. A locking key prevents sleeve retraction. It inter-changes with National "A" Type, Perfecting "P" Type and Thor PHC series couplings. RSC # Size Part #

80402072 3/4" PHL12

Whipcheck Safety CableA positive safeguard for air hose connections, helping you meet today's safety standards. These strong cables preventhose whip in case of an accidental separation of the coupling or clamp device. WHIPCHEK reaches across the hosefittings to provide standby safety for the hose. Spring-loaded loops in the cable ends open easily to pass over the cou-plings for a firm grip on the hose. WHIPCHEK must be installed in the extended position (no slack). The maximumworking pressure for air is 200 PSI, and the cables are highly resistant to rust and corrosion. No tools are needed forinstallation, and the cables feature either a hose-to-hose or a hose-to-rigid outlet.

RSC # Cable Hose ID Length Part #83507010 1/8" 1/2" to 1-1/4" 20-1/4" WSR183507015 1/4" 1-1/2" to 3" 38" WSR2

83507000 1/8" 1/2" to 1-1/4" 20-1/4" WB183507005 1/4" 1-1/2" to 3" 38 1/4" WA2

Hose End Tool End

Hose End Hose End

Safety Blow GunThis nozzle conforms to US Dept. of Labor OSHAStandards 1910.242B and 1910.95, and to Title 41,Walsh-Healy Rules and Regulations P50-204.8Safety and Health Standards. The slender 4" extend-ed nozzle allows access to hard-to-reach places andholes as small as .200". The pressure rating is 150PSI. A variable output trigger enables the user tocontrol air flow, and a hook design near the triggerprovides finger protection as well as easy storage.Side holes allow air to escape if the nozzle tip isdead-ended, thus preventing back pressure buildup.

Air Fittingsand

Accessories

116

Universal Air Chief CouplersThese 1/4" couplers are universally compatible with Automotive, Industrial and ARO 210 plug configurations. They arerated at 150 PSI, with a flow rating of 37 CFM at 100 PSI . The couplers are completely automatic - just push to con-nect, and they shut off when disconnected.

RSC # Size Part #80307630 1/4" UDC21

80307635 1/4" UDC20

Male NPT Coupler

Female NPT Coupler

Coil Chief Self-Storing Air HoseCoil Chief comes in yellow, and is standard with swivel on one end.

RSC # Male NPT Size Hose ID X Length Part #83506212 1/4" 1/4" X 12' CC141283506225 1/4" 1/4" X 25' CC142583506250 1/4" 1/4" X 50' CC145083506325 3/8" 3/8" X 25' CC382583506350 3/8" 3/8" X 50' CC385083506425 1/2" 1/2" X 25' CC122583506450 1/2" 1/2" X 50' CC1250

RSC # Inlet Size Part #81001905 1/4" Female NPT ENBG1

Filters,Regulators &Lubricators

117

1/2" Basic Regulator, Manual DrainIn-line or modular installation. Two1/4" full-flow gauge ports. Relievingtype. Adjustable 5-150 PSI, inlet pressure 300 PSI max.

1" Basic Regulator, Manual DrainReliable, accurate pressure regula-tion. Two 1/4" high-flow gauge ports.Relieving type. Adjustable 5-125 PSI, inlet pressure 300 PSI max.

1/2" Basic - Transparent Bowl with Guard, Manual Drain

1" Basic - Metal Bowl with Sight Glass, Manual DrainGeneral purpose with low pres-sure drop and excellent watercharacteristics. 50-Micron elementstandard, one quart reservoir, inletpressure is 250 PSI max.

RSC # Size Part # SCFM15502203 3/8" F74G-3M 12015502204 1/2" F74G-4M 15015502206 3/4" F74G-6M 185

15502208 1" F17-800M 445

Series 1 RegulatorsRSC # Size Part # SCFM15501204 1/2" R74G-4R 20015501206 3/4" R74G-6R 200

15501208 1" R17-800R 400

Wilkerson LubricatorsEcon-O-Mist lubricators are designed so that all the oil flow observed in the sight dome is broken into a mist and deliv-ered via the airflow to the application. This type of lubricator allows the user to fill or replenish the oil in the bowl withoutinterrupting airflow or bleeding pressure from the system.Once the oil-fill cap is removed, the bowl is depressurizedand isolated from line pressure, and the bowl itself can beremoved, if desired, for faster refill. The bowl can also befilled "right to the top."

Compact Transparent Bowl w/ Guard

RSC # Size Part #15503202 1/4" L16-02A

Series 1 Airline Filters

Filters,Regulators &Lubricators

118

Series 1 LubricatorsMicro-fogging lubricators, identified by a red adjusting screw, are used for applications containing one or more points oflubrication, cylinders and multiple or single tools. Air flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the fog generator and atomized into a fine mist. The micro-fogging lubricator delivers upto 25% of the oil drops visible through the transparent sight-feed dome. They cannot be filled under pressure.

1/2" Basic Lubricator, TransparentBowl with Guard

1" Basic Lubricator, Metal Bowl with Sight GlassProportional oil delivery - accurate oildelivery adjustment. One turn threadedbowl attachment permits easy mainte-nance. One quart metal reservoir withdrain and oil level sight gauge standard.Inlet pressure 250 PSI max.

RSC # Size Part # SCFM15503203 3/8" L74M-3 14015503204 1/2" L74M-4 14015503206 3/4" L74M-6 140

15503208 1" L17-800A 275

Shank TypeFittings

119

King Combination NipplesThese nipples are made from tubular stock to fit straight end hose. The threaded end in all styles has male NPT thread.Combination nipples are recommended for low-pressure dis-charge and suction service forcompatible liquids, not for com-pressible products such as air,nitrogen or steam. The workingpressure of combination nippleswill vary with the size and con-struction of the hose, the type andnumber of clamps used, clampplacement, proper installation ofclamps, temperature and productbeing conveyed. In accordancewith the RMA Bulletin for OilSuction and Discharge Hose, acoupled length of hose in any sizeshould be tested to 1-1/2 times theworking pressure and held for fif-teen minutes without leaking orcoupling movement. Plated steelnipples in sizes 1/2" to 2" areknurled, while the 316 stainlesssteel nipples are not knurled.

RSC # Size Part# Qty.83503001 1/2" STC1 5083503005 3/4" STC5 5083503010 1" STC10 5083503015 1-1/4" STC15 5083503020 1-1/2" STC20 5083503025 2" STC25 2583503030 2-1/2" STC30 1083503035 3" STC35 1083503040 4" STC40 583503050 5" STC50 483503060 6" STC60 283503080 8" STC80 283503100 10" STC100 183503120 12" STC120 1

83501101 1/2" RST1 5083501105 3/4" RST5 5083501110 1" RST10 5083501115 1-1/4" RST15 5083501120 1-1/2" RST20 5083501125 2" RST25 2583501135 3" RST35 10

83501201 1/2" AST1 5083501205 3/4" AST5 5083501210 1" AST10 5083501215 1-1/4" AST15 5083501220 1-1/2" AST20 50

83502920 2" HB200 24

Plated Steel

316 Stainless Steel

Aluminum

Tuff-Lite Polypropylene

Pin Lug Spanner Wrenches

Spanner wrenches are made of plat-ed malleable iron.

RSC # Size Part #81106012 1-1/2" SW1581106020 2-1/2" SW25

StrainersStrainers, with a standard threadedround hole.

RSC # Size Part #83506820 1-1/2" RHS2083506825 2" RHS2583506835 3" RHS3583506840 4" RHS4083506860 6" RHS60

3500 Steel NipplesThese nipples are zinc-plated, andare shipped in packages of 100.

RSC # Hose NPT Part #83505605 3/8" 1/4" 350583505610 1/2" 3/8" 3510

Shank TypeFittings

120

King Short Shank Suction CouplingsThese complete couplings are made of plated malleable iron, including the swivel nut.

RSC # Size Part #83505048 1-1/4" S4883505063 1-1/2" S6383505078 2" S7883505093 2-1/2" S9383505111 3" S11183505123 4" S12383505168 5" S16883505183 6" S18383505243 8" S243

Complete Coupling

Dixon Steel Hose MendersRSC # Size Part # Qty.83501401 1/2" DM1 5083501406 3/4" DM6 5083501411 1" DM11 5083501416 1-1/4" DM16 5083501421 1-1/2" DM21 5083501426 2" DM26 5083501431 2-1/2" DM31 2583501436 3" DM36 2083501446 4" DM46 1083501451 5" DM51 583501466 6" DM66 483501486 8" DM86 1

83502706 3/4" RDM6 5083502711 1" RDM11 5083502721 1-1/2" RDM21 5083502726 2" RDM26 50

Zinc Plated Steel Mender

316 Stainless Steel Mender

Brass Fittingsand

Accessories

121

Garden Hose AccessoriesRSC # Part #80901125 SN75

80802810 BTN75

80801810 TVS7-30

80801710 GHYV

80802010 DGH7

Insulated Water NozzleNozzle features a heavy-duty brass valve andadjusting nut, chrome-plated all-zinc body and anindustrial-strength nylon handle. It can handle hotwater up to 180° F.

Solid Brass Full-Size Twist Nozzle

Garden Hose Screen GasketFDA-approved black vinyl, 6050 mesh, 304Stainless Steel

Twin ConnectorPowder-coated zinc with twin shut-off valves.Handles hot water up to 160° F. 150 PSI.

Garden Hose Quick CouplerPrecision-machined from solid brass with easypush-pull ring for long-lasting and quick hose attach-ments. Maximum operating pressure: 200 PSI.

Brass Short Shank Couplings, Complete and MachinedRSC # Size Part #80801690 1" BS808

80801510 1/2" BC74

1" Hose ID & Thread

GHT Thread, 1/2" Hose ID

Barbed HoseMender

RSC # Size Part #83501250 1/4" BM283501255 3/8" BM383501260 1/2" BM483501265 3/4" BM6

Brass GHT Adapters, 100 per pkg.RSC # Desc. Part #80801322 GHT X GHT BA977

80801410 GHT X 1/2" NPT BAS97480801420 GHT X 3/4" NPT BAS976

80801200 GHT X 1/2" NPT BA79480801210 GHT X 3/4" NPT BA79680801220 GHT X 1" NPT FM1076

80801010 GHT X 1/2" NPT BA97480801020 GHT X 3/4" NPT BA976

80801310 GHT X 1/2" NPT BA7480801320 GHT X 3/4" NPT BA776

Female Swivel

Female Swivel

Male GHT xFemale NPT

Rigid Female

Threaded Male

NylonFittings andAccessories

122

Tuff-Lite InsertsNylon fittings are generally acceptable for working pressures up to 150 PSI at normal room temperatures. At very lowpressures, temperatures can approach 175° F with no degradation of the fittings strength. Nylon fittings should not beused with acid-based fertilizers, bromine, chlorine, flourine, hydrochloric acid, iodine, nitric acid, phosphoric acid, sulfu-ric acid or xylene. Nylon should not be used with compressed gas. Parts are white.

RSC # Hose Size NPT Part # Qty.83502610 3/8" 3/8" TN33 5083502614 1/2" 1/4" TN42 5083502616 1/2" 1/2"" TN44 5083502623 3/4" 3/4" TN66 5083502626 1" 1" TN88 2583502627 1-1/4" 1-1/4" TN150 1083502628 1-1/2" 1-1/2" TN200 1083502629 2" 2" TN250 5

Tuff-Lite AccessoriesRSC # Hose Size Thread Part # Qty.83502605 1/4" 3/4" NPSM TN26 50

83502552 1/4" n/a TM2 5083502560 5/16" n/a TM25 5083502553 3/8" n/a TM3 50

83502650 1/4" n/a TSSS222 5083502652 3/8" n/a TSSS333 5083502654 1/2" n/a TSSS444 5083502656 3/4" n/a TSSS666 25

83502630 1/4" 1/8" NPT TPN21 5083502631 1/4" 1/4'" NPT TPN22 50

83502640 1/4" n/a TPM2 5083502641 3/8" n/a TPM3 5083502642 1/2" n/a TPM4 50

Short Shank Coupling

Menders

Tees

Male Push-On Insert

Push-On Hose Mender

HoseClamps

123

Mini Worm Gear ClampsMAH-style clamps, all stainless steel construction, with combination 1/4" hexagon and screwdriver slotted screw. SAE300 series stainless steel band and housing. SAE 305 stainless steel screw. 5/16" band width. Sold 10 per box.

RSC # Diam. Range Part # Master00106800 7/16" to 25/32" MAH6 500

Double Bolt ClampsA rugged, plated malleable iron two-bolt clamp with machine bolts and hex nuts. The inner surface has dual grippingridges. The bolt lugs are reinforced to prevent bending out of alignment. For best results, measure the hose OD accu-rately before ordering. Recommended torque is rated in FT. LBS.

RSC # Hose OD Part # Qty. Torque83505502 3-1/2" to 3-13/16" 400 25 4083505504 4-1/32" to 4-9/32" 463 20 4083505506 4-1/4" to 4-15/16" 525 10 6083505508 4-1/2" to 5-1/4" 550 10 6083505510 5-1/8" to 5-11/16" 600 10 6083505512 5-15/16" to 6-1/2" 675 10 6083505514 6-1/2" to 7-9/16" 769 10 6083505516 7-11/16" to 8-3/16" 818 5 12583505518 8-1/4" to 8-7/8" 875 5 12583505520 8-15/16" to 9-7/8" 988 5 12583505522 9-15/16" to 11-3/8" 1125 5 12583505524 11-3/16" to 13" 1275 3 12583505526 13-13/16" to 15" 1450 2 20083505528 15-1/16" to 17-1/2" 1700 2 260

Single Bolt ClampsMade of plated malleable iron. For best results, measure the hose OD accurately before ordering clamps.Recommended torque is rated in FT. LBS.

RSC # Hose OD Part # Torque83503209 1-17/32" to 1-11/16" 9 683503210 1-21/32" to 1-3/4" 10 683503211 1-3/4" to 1-7/8" 11 683503213 2" to 2-1/8" 13 1283503215 2-1/4" to 2-13/32" 15 1283503217 2-1/2" to 2-5/8" 17 1283503218 2-5/8" to 2-7/8" 18 1283503219 2-7/8" to 3-1/16" 19 1283503220 3-1/16" to 3-1/4" 20 1283503222 3-7/16" to 3-5/8" 22 2183503223 3-5/8" to 3-13/16" 23 21

Flo-MateCouplings

124

Flo-Mate CouplingsFlo-Mate Couplings offer maximum flow with an unrestricted flow path, permitting maximum temperature control andminimum coupling size. Sockets, sleeves and valves are brass. Sleeve spring and valve spring are 302 stainless steel.Locking balls are 440 stainless steel. Socket seal is Viton. Plugs are designed short so that they can be easilyrecessed below a mold surface to avoid damage (when mold is changed or stored). Non-valved design should be usedwhere maximum flow is needed and automatic shut-off is not required. Service pressure is 200 PSI. Suitable for usewith hot oil, water glycol and high temperature water.

RSC # Size Hose ID/Thread Part # Qty.83507020 3/8" 3/8" ID FMC306 5

83507025 3/8" 1/4" Thread FMP352-F 25

83507030 3/8" 3/8" Thread FMP353 25

Straight Stem Hose Shank

Female NPT Steel Plug

Male NPT Brass Plug

WARNINGOver-pressurization could result in a sudden failure of the coupling, causingsevere bodily injury or death. Be sure to select the proper coupling for your

application and use it only within the specified service pressure ranges.Also, please remember that couplings can and do wear out. They must be

routinely checked for condition and replaced when necessary.

Universal WrenchFor pin lug or sensible (rocker) lug couplings on spanners or hydrants,1" through 4-1/2". Malleable iron, red epoxy painted. Overall length 11-3/4" Weight 1.16 lbs.

Fire HoseAccessories

125

RSC # Part #81106024 233

Hex NipplesRSC # Dimensions Part # Qty.81108002 1-1/2" NPT x 1-1/2" NST DMH1515F 25

81108012 2" NPT x 2-1/2" NST (NH) FM2025F 10

81108010 2-1/2" NST (NH) x 2" NPT FM25F20T 10

Double Male Nipple

Female to Male Nipple

Female to Male Nipple

Thermoplastic Fog NozzlesMade of red polycarbonate with a brass stem. This nozzles can adjust from straight steam to fog, and features abumper. Model # FMB75GHT was measured with a 120° F spray, all others with a 90° F spray.

RSC # Size Thread GPM @ 100 PSI Part #81104001 3/4" GHT 30.9 FNB75GHT81104003 1" NPS 11.4 FNB100S81104016 1-1/2" NPS 83.6 FNB150S

Brass Plain Hose NozzlesRSC # Size Thread Length Orifice Part #81104416 3/4" GHT 6" 1/4" BN681104406 3/4" NPSH 6" 1/4" BN781104508 1" NPSH 8" 5/16" BN1081104610 1-1/4" NPSH 10" 3/8" BN1281104710 1-1/2" NPSH 10" 1/2" BN15

126

Series 1000/400/500

One-Way Couplings

RSC # Thread Size Part #80302100 1/4 - 18 NPTF 110080301300 3/8 - 18 NPTF 1300

80301610 1/4 - 18 NPTF 1080301612 1/8 - 27 NPTF 1280301614 3/8 - 18 NPTF 1480300910 1/4 - 18 NPTF B-10

80301611 1/4 - 18 NPTF 1180301613 1/8 - 27 NPTF 1380301615 3/8 - 18 NPTF 15

RSC # Hose I.D. Part #80301616 1/4 inch 1680301617 3/8 inch 1780301618 5/16 inch 18

Sockets - Male End Connection

Plugs - Male End Connection

Plugs - Female End Connection

Plugs - Hose Stem End Connection

Hansen's industrial interchange, manually operated Ball-Lock quick-connect couplings are rugged and reliable, designed for use withcompressed air, gases and liquids. The sockets feature a brass body,nickel-plated steel sleeve, zinc-plated steel valve, Buna-N (Nitrile)seal, and stainless steel springs and locking balls. Plugs are made ofzinc-plated case-hardened steel. Dust caps and plugs are available.

Series 1000• 1/4" body size• 2,000 PSI rated pressure• 138 BAR rated pressure• 28 Ac flow capacity• Item #B-10 is brass.

RSC # Thread Size Part #80301640 1/4 - 18 NPTF 4080301642 3/8 - 18 NPTF 4280301644 1/2 - 14 NPTF 44

80301641 1/4 - 18 NPTF 4180301643 3/8 - 18 NPTF 4380301645 1/2 - 14 NPTF 45



Series 400• 3/8" body size• 1,000 PSI rated pressure• 69 BAR rated pressure• 45 Ac flow capacity

RSC # Thread Size Part #80301610 3/8 - 18 NPTF 5280301612 1/2 - 14 NPTF 5480301614 3/4 - 14 NPTF 5680300954 1/2 - 14 MPTF B-54

80301611 1/4 - 18 NPTF 1180301613 1/8 - 27 NPTF 13





Series 500• 1/2" body size• 500 PSI rated pressure• 35 BAR rated pressure• 72 Ac flow capacity• Item #B-54 is brass.

127

Series3000/4000/5000/6000 One-Way Couplings

RSC # Thread Size Part #80303100 1/4 - 18 NPTF 310080303300 3/8 - 18 NPTF 3300

80301610 1/4 - 18 NPTF 1080300910 1/4 - 18 NPTF B-10

80303000 1/4 - 18 NPTF 300080303200 3/8 - 18 NPTF 3200

RSC # Hose I.D. Part #80303600 1/4 inch 360080303700 3/8 inch 3700



Sockets - Female End Connection

Sockets - Hose Stem EndConnection

Hansen's industrial interchange pin-lock couplings are rugged andreliable, designed for use with compressed air, gases and liquids.These are the original automatic one-way shotuff couplings,designed by Hansen, the Industry Standard. An easy, automatic,push-to-connect design provides instantaneous connection and

disconnection of lines, plus automatic shut-off of the socket end. The sockets feature a brass body,nickel-plated steel sleeve, zinc-plated steel valve, Buna-N (Nitrile) seal, and stainless steel springsand locking pins. Plugs are made of zinc-plated case-hardened steel. Dust caps and plugs areavailable.

Series 3000• 1/4" body size• 2,000 PSI rated pressure• 138 BAR rated pressure• 28 Ac flow capacity• Item #B-10 is brass.

RSC # Thread Size Part #80304300 3/8 - 18 NPTF 4300

80301640 1/4 - 18 NPTF 4080301642 3/8 - 18 NPTF 4280301644 1/2 - 14 NPTF 44

80304200 3/8 - 18 NPTF 4200

80301641 1/4 - 18 NPTF 4180301643 3/8 - 18 NPTF 4380301645 1/2 - 14 NPTF 45





Series 4000• 3/8" body size• 1,000 PSI rated pressure• 69 BAR rated pressure• 45 Ac flow capacity

128

Series3000/4000/5000/6000 One-Way Couplings

RSC # Thread Size Part #80305100 3/8 - 18 NPTF 510080305300 1/2 - 14 NPTF 530080305500 3/4 - 14 NPTF 5500

80301652 3/8 - 18 NPTF 5280301654 1/2 - 14 NPTF 5480301656 3/4 - 14 NPTF 5680300954 1/2 - 14 NPTF B-54

80305001 1/4 - 18 NPTF 5000-A80305000 3/8 - 18 NPTF 500080305200 1/2 - 14 NPTF 520080305400 3/4 - 14 NPTF 5400

80301653 3/8 - 18 NPTF 5380301655 1/2 - 14 NPTF 55


80301659 1/4 - 18 NPTF 5980301660 1/8 - 27 NPTF 6080301661 1/4 - 18 NPTF 61

80301028 1/4" (15/32" O.D.) 5-PB180301030 1/4" (1/2" O.D.) 5-PB3





Sockets - Hose Stem EndConnection


Plugs - Hose Clamp EndConnection

Series 5000• 1/2" body size• 500 PSI rated pressure• 35 BAR rated pressure• 72 Ac flow capacity

RSC # Thread Size Part #80306200 1/2 - 14 NPTF 620080306400 3/4 - 14 NPTF 640080306600 1-11 1/2 NPTF 6600

80301665 1/2 - 14 NPTF 65A80301670 3/4 - 14 NPTF 67A80301690 1-11 1/2 NPTF 69A



Series 6000• 3/4" body size• 220 PSI rated pressure• 15 BAR rated pressure• 125 Ac flow capacity

129

One-WayCouplings

RSC # Thread Size Part #80300825 1/4 - 18 NPTF 21AP-25M

80300737 3/8 - 18 NPTF 20AP-37F80300828 1/4 - 18 NPTF 21AP-25F



Series Auto-Flo 23Hansen's high flow, automatic quick-connect couplings are designed for use with compressed air. They are the firstautomatic universal coupling designed to operate with Industrial (Series 3000), ARO 210 and Tru-Flate interchangeplugs. An easy, automatic, push-to-connect design provides instantaneous connection and disconnection of lines, plusautomatic shut-off of the socket end. The sockets feature a brass body and valve, zinc-plated steel sleeve, Buna-N(Nitrile) seal, and stainless steel springs and locking balls. The ARO-210 and Tru-Flate plugs are made of zinc-platedcase-hardened steel. These couplings carry a pressure rating of 150 PSI/10 BAR, and have a flow capacity of 32 Ac(ARO 210) or 30 Ac (Tru-Flate).

RSC # Thread Size Part #80301016 1/4 - 18 NPTF 2-L15

80302014 1/4 - 18 NPTF 2-R16



Series 2RLHansen's ring-lock quick-connect couplings have a unique interchange which was designed for use with compressedair. They have a high-flow capacity equal to that of most 3/8" couplings, despite the 1/4" body size of the 2RL series.Their easy, push-to-connect design will not disconnect if the hose is dragged on the ground, and requires just a simplerotation of the locking sleeve to disconnect. The sockets feature a zinc-plated steel sleeve, body and valve, brass sock-et end, Buna-N (Nitrile) seal, stainless steel springs and a zinc-plated locking ring. The plugs are made of zinc-plated,case-hardened steel. Dust caps and plugs are available. The couplings have a rated pressure of 300 PSI/20 BAR, anda flow capacity of 48 Ac.

130

Two-WayCouplings

Accessories

Series 1HK to 8HKHansen's HK series couplings are designed for general hydraulic service, such as liquids, chemicals, steam, gases andvacuum. They conform to the dimensional requirements of ISO 7241-1 Series B. Sockets and plugs are available inbrass, steel and stainless steel construction, with end connections that are female NPTF, BSPP or SAE O-Rings. Theyalso feature stainless steel springs, balls and retaining rings and Buna-N (Nitrile) seals. Steel and stainless steel sock-ets have Teflon back-up rings. Dust caps and plugs are available.

Series HK Plugs

Series HK Sockets

Series FS Flow SensorHansen's compact and econonical Flow Sensors are designed to protect personneland property in case of hose failure, in compliance with Federal Safety Regulations.They are intended for use with compressed air. The sensors automatically shut offair flow to ruptured hose (reducing the risk of injury or damage from hose whip),then reset after the failure connection. All sizes features a 250 PSIG pressure rat-ing, and have a low pressure drop. The bodies are made of brass with acetal valvesand a stainless steel valve spring.

BodySize

Type 316 Stainless Steel Thread Size (Female)RSC # Part # NPTF SAE

1/4 in. 80300516 2-K16 1/4 - 18 --3/8 in. 80300521 3-K21 3/8 - 18 --1/2 in. 80300526 4-KP26 1/2 - 14 --3/4 in. 80300531 6-KP31 3/4 - 14 --1 in. 80300536 8-KP36 1-11 1/2 --

1 in. 80301036 8-KP16 -- 1 5/16 - 12

*NOTE: ML6-HP31 is made of Type 316 Stainless Steel, not Brass.

BodySize

Standard Brass Standard Steel Female ThreadSize

Rated Pressure-Steel Rated Pressure-St. Steel

RSC # Part # RSC # Part # PSI BAR PSI BAR

1/4 in. 80302000 B2-H16 80302010 2-H16 1/4 - 18 NPTF 3,700 255 3,700 255

3/8 in. 80302002 B3-H21 80302012 3-H21 3/8 - 18 NPTF 3,700 255 3,700 255

1/2 in. 80302004 B4-HP26 80302013 4-HP26 1/2 - 14 NPTF 5,000 345 4,250 293

3/4 in. 80302007 *ML6-HP31* 80302018 6-HP31 3/4 - 14 NPTF 4,000 275 3,500 242

BodySize RSC # Part # Thread Size Shutoff Flow, scfm, at Inlet Pressure, psig

60 80 100 120 140 160 180 2001/4 in. 80300104 B4-FS-25F-2 1/4 - 18 NPTF 16 18 20 22 23 25 26 273/8 in. 80300106 B6-FS-37F-5 3/8 - 18 NPTF 41 46 50 55 59 63 66 691/2 in. 80300108 B8-FS-50F-8 1/2 - 14 NPTF 65 73 80 87 93 104 104 109

3/4 in. 80300112 B12-FS-75F-13 3/4 - 14 NPTF 105 118 130 152 161 169 169 177

131

Series STStraight-Through

Couplings

Series STHansen's ST series straight-through couplings are designed for use where minimumpressures drop is required and valving is not needed. They are well-suited for use onpressure wash, steam cleaning and carpet cleaning equipment, and many fluid trans-fer systems. Sockets are made of brass or 303 stainless steel, with stainless steelsprings, balls and retaining rings. The plugs are made of brass, zinc-plated steel or303 stainless steel, with Buna-N (Nitrile) seals.

Series ST Plugs

Series ST SocketsBody Size RSC # Part # Thread Size Construction Rated Pressure

1/4 in. 80302016 2-S16 1/4 - 18 NPTF Brass 5,200 PSI 359 BAR3/8 in. 80302030 3-S21 3/8 - 18 NPTF Brass 2,800 PSI 193 BAR1/2 in. 80301926 4-S26 1/2 - 14 NPTF Brass 2,200 PSI 152 BAR

1 in. 80301936 LL8-S36 1-11 1/2 NPTF Stainless Steel 2,000 PSI 138 BAR

Body Size RSC # Part # Thread Size Construction Rated Pressure1/4 in. 80302040 2-T16 1/4 - 18 NPTF Brass 5,200 PSI 359 BAR3/8 in. 80302045 3-T21 3/8 - 18 NPTF Brass 2,800 PSI 193 BAR3/8 in. 80301009 LL3-T21 3/8 - 18 NPTF Stainless Steel 6,300 PSI 434 BAR1/2 in. 80301927 4-T26 1/2 - 14 NPTF Brass 2,200 PSI 152 BAR

1 in. 80301937 LL8-T36 1-11 1/2 NPTF Stainless Steel 2,000 PSI 138 BAR

132

StandardHose Fittings

AMERICAN COUPLINGS

All American Couplings Company standard hose fittings are machined from free cutting brass rodCDA 353, 360 and 377 brass alloys, and type 316 stainless steel.

Series 102NPTF Male Hose Barbs - Dryseal

Series 103NPTF Male Swivel Hose Barbs - Dryseal

Series 200Stamped Brass Ferrule

RSC # Mfg. No. Hose I.D. Thread Size Length Hex Barbs Barb Length Std. Pkg. Wt. per 10071401005 102-0402 1/4 in. 1/8 - 27 NPTF 1.57 in. 1/2 in. 4 .97 in. 100 2.9 lbs.71401006 102-0404 1/4 in. 1/4 - 18 NPTF 1.76 in. 9/16 in. 4 .97 in. 100 4.3 lbs.71401007 102-0406 1/4 in. 3/8 - 18 NPTF 1.76 in. 11/16 in. 4 .97 in. 100 5.6 lbs.71401009 102-0504 5/16 in. 1/4 - 18 NPTF 1.76 in. 9/16 in. 4 .97 in. 100 4.2 lbs.71401010 102-0506 5/16 in. 3/8 - 18 NPTF 1.76 in. 11/16 in. 4 .97 in. 100 5.6 lbs.71401012 102-0604 3/8 in. 1/4 - 18 NPTF 1.76 in. 9/16 in. 4 .97 in. 100 4.8 lbs.71401013 102-0606 3/8 in. 3/8 - 18 NPTF 1.76 in. 11/16 in. 4 .97 in. 100 6.1 lbs.71401014 102-0608 3/8 in. 1/2 - 14 NPTF 1.97 in. 7/8 in. 4 .97 in. 50 11.7 lbs.71401017 102-0806 1/2 in. 3/8 - 18 NPTF 1.76 in. 11/16 in. 4 .97 in. 100 7.5 lbs.71401018 102-0808 1/2 in. 1/2 - 14 NPTF 1.97 in. 7/8 in. 4 .97 in. 50 12.2 lbs.71401019 102-0812 1/2 in. 3/4 - 14 NPTF 1.97 in. 1-1/16 in. 4 .97 in. 50 16.0 lbs.71401021 102-1008 5/8 in. 1/2 - 14 NPTF 1.97 in. 7/8 in. 4 .97 in. 50 11.6 lbs.71401022 102-1012 5/8 in. 3/4 - 14 NPTF 1.97 in. 1-1/16 in. 4 .97 in. 50 16.2 lbs.71401023 102-1208 3/4 in. 1/2 - 14 NPTF 2.19 in. 7/8 in. 4 1.19 in. 50 16.8 lbs.71401024 102-1212 3/4 in. 3/4 - 14 NPTF 2.19 in. 1-1/16 in. 4 1.19 in. 25 18.9 lbs.

71401026 102-1616 1 in. 1-11 1/2 NPTF 2.54 in. 1-3/8 in. 5 1.19 in. 10 38.4 lbs.

RSC # Mfg. No. Hose I.D. Thread Size Length Hex Barbs Barb Length Std. Pkg. Wt. per 10071401101 103-0404 1/4 in. 1/8 - 27 NPTF 2.12 in. 9/16 in. 4 .97 in. 100 5 lbs.

71401102 103-0606 3/8 in. 3/8 - 18 2.12 in. 11/16 in. 4 .97 in. 50 7.5 lbs.

RSC # Mfg. No. Ferrule I.D. Ferrule Length Hole Size Gauge Std. Pkg. Wt. per 10071401005 200-8120/7333 .812 in. 1 in. .63 in. .024 50 2 lbs.71401006 200-9750/5028A .975 in. .84 in. .69 in. .024 50 2.23 lbs.

71401007 200-9950/7104A 1.150 in. .84 in. .88 in. .024 50 2.62 lbs.

133

Lock-OnHose Fittings

AMERICAN COUPLINGS

American Couplings Company's LOK-ON fittings are designed for use with LOK-ON (push-onstyle) hoses -- no hose clamps or ferrules necessary. They are easy to assemble and disassemble,just by pushing on. Fast and easy!

Series 272, 278• Series 272 - NPTF Male Hose Barb - Dryseal

• Series 278 - NPSM Female Swivel Hose Barb - Ball Seat Type

Series 296Hose Splicer

Series 589American Couplings Company's garden hose fittings are manufactured with standard barb con-figurations and are available in standard, long shank and short shank. They are designed foruse with either hose clamps or crimped ferrules.

Short Shank Garden Hose Fitting Set (Hex Nut)

RSC # Mfg. No. Style Hose I.D. Thread Size Length Hex Barbs Barb Length Std. Pkg. Wt. per 10071405601 272-0402 Hose Barb 1/4 in. 1/8 - 27 NPTF 1.42 in. 7/16 in. 2 .77 in. 100 2.9 lbs.

71406101 278-0402 Swivel Hose Barb 1/4 in. 1/8 - 27 NPTF 1.39 in. 1/2 in. 2 .77 in. 50 3.1 lbs.

RSC # Mfg. No. Hose I.D. Length Barbs Barb Length Std. Pkg. Wt. per 10071406906 296-1010 5/8 in. 3.21 in. 3 1.5 in. 25 13.8 lbs.

71406908 296-1212 3/4 in. 3.21 in. 3 1.5 in. 25 15.6 lbs.

RSC # Mfg. No. Hose I.D. Thread Size Length Std. Pkg. Wt. per 10071401101 589-1010 5/8 in. 3/4 - 11-1/2 NH 2.95 in. 20 22.1 lbs.

71401102 589-1212 3/4 in. 3/4 - 11-1/2 NH 2.95 in. 20 24.4 lbs.

134

Band-It ToolsOriginal Band-It ToolThe original Band-It Tool is a drop forged tool with tensioning capability of over 2,400 lbsand a built-in cutter. New improved features include:

• A spring loaded gripper lever for improved band tensioning• A friction held cutoff lever with plastic grip for easier operation• A blue, epoxy powder coated finish virtually impervious to impact, chemicals and corrosive elements

• A spring handle retaining ring to keep parts intact.

Giant Band-It ToolThe Giant Tool must be used to apply heavy-duty Giant clamps. Measuring 16-1/2" inlength, it is designed to pull up to 16,000 pounds.

Band-It Junior Adapter, Heavy Duty Jr. AdapterBand-It Jr. Smooth ID Clamps and Preformed Clamps are applied with the original Band-Ittool and the Jr. Adapter tool. For portable applications, use the Heavy Duty Jr. Adapter tool.

Center Punch ToolThese ratchet-action tensioning tools are used to apply Center Punch and Center PunchOpen-End clamps with a center punch lock. This model is used for 3/8" (9.53mm) wideand 5/8" (15.99mm) wide clamps.

Pok-It II ToolA smaller, more portable Band-It model, used to apply 1/4" and 3/8" width clamps It canalso be used for free-end clamps in a wide range of sizes.

Band-It Tool

Giant Band-It Tool

Heavy-Duty Jr. Adapter

Jr. Adapter Tool

Center Punch Tool

Pok-It II Tool

Hand Tools

RSC # Catalog # Description Pkg.Qty.

Weight(Lbs.) (Kg)

84401101 C001 The Band-It Tool 1 4.4 2.084000001 J001 Band-It Jr. Adapter 1 1.4 .684406205 J050 Heavy Duty Jr. Adapter 1 1.7 .884401102 G402 Giant Band-It Tool 1 11.7 5.384400038 S038 Center Punch Tool 1 1.10 .584405900 20020 Pok-It II Tool 1 1.10 .5

135

Band-it Bands and BucklesThe Band-It band in Type 201 stainless steel has been the industry standard for over 60 years withits superior yield and tensile strength properties for maximum clamping strength. Each band fea-tures a fully rounded smooth edge for safety and easy installation. For clamps of even greaterstrength, use a double wrap, threading the Ear-Lokt Buckle each time around. The Ear-LoktBuckles are also made of Type 201 stainless steel, and feature unique teeth and ears for maximumstrength, whether you decide on a single or double wrap.

Giant Bands and BucklesGiant Band-It bands and buckles are also made of Type 201 stainless steel. The bands are used for heavy-duty clamp-ing applications, and can be double-wrapped for maximum strength. The largest size (1-1/4") has a breaking strengthof 5,500 pounds! The buckles are made in corresponding sizes, and can accomodate single and double wraps.

Bands and Buckles

Bands -- 100 feet per roll

RSC # Catalog # Width Thickness Weight

(In.) (mm) (In.) (mm) (Lbs.) (Kg)

C201 3/16 4/76 .015 .38 1.2 .5484401202 C202 1/4 6.35 .020 .51 1.7 .984401203 C203 3/8 9.53 .025 .63 3.2 1.684401204 C204 1/2 12.70 .030 .76 5.1 2.484401205 C205 5/8 15.88 .030 .76 6.4 3.0

84401206 C206 3/4 19.05 .030 .76 7.7 3.6

Buckles -- 100 per packageC251 3.16 4.76 -- -- .16 .07

84402252 C252 1/4 6.35 -- -- .3 .184402253 C253 3/8 9.53 -- -- .8 .484402254 C254 1/2 12.70 -- -- 2.1 1.084402255 C255 5/8 15.88 -- -- 2.4 1.1

84402256 C256 3/4 19.05 3.7 1.7


RSC # Catalog # Width Thickness Weight(In.) (mm) (In.) (mm) (Lbs.) (Kg)

84401506 G430 3/4 19.05 .044 1.12 11.6 5.484401508 G431 1 25.40 .044 1.12 13.7 6.4

84401510 G432 1-1/4 31.75 .044 1.12 17.2 8.0

Bands -- 25 feet per roll84402838 G440 3/4 19.05 -- -- 1.8 .884402840 G441 1 25.40 -- -- 2.4 1.1

84404842 G442 1-1/4 31.75 -- -- 3.2 1.4

136

Type 316 Bands and BucklesType 316 stainless steel is specified for use in situations where corrosion is a major concern. It is an austenitic chromi-um-nickel/moly stainless with excellent corrosion resistant properties. It is used extensively in moist atmospheres andenvironments where it is subject to chemicals, salts, acids, and high temperatures. The corresponding buckles canaccomodate single and double wraps.

Galvanized Carbon Steel Bands & BucklesGalvanized carbon steel bands and buckles are used in applications which do not demand high strength or corrosionprotection. The corresponding buckles can accomodate single and double wraps.

Scru-Lokt BucklesThese buckles are used when closequarters will not permit the roll-overaction of the Band-It Tool, or when atemporary or adjustable clamp is

desired. They are reusable, and can even beretensioned, and come with their own hex tool.

Bands and Buckles



(In.) (mm) (In.) (mm) (Lbs.) (Kg)

84401402 C402 1/4 6.35 .020 .51 1.7 .984401403 C403 3/8 9.53 .025 .63 3.2 1.684401404 C404 1/2 12.70 .030 .76 5.1 2.484401405 C405 5/8 15.88 .030 .76 6.4 3.0

84401406 C406 3/4 19.05 .030 .76 7.7 3.6

Buckles -- 100 per packageC452 3/8 9.53 -- -- .3 .1

84402453 C453 3/8 9.53 -- -- .8 .484402454 C454 1/2 12.70 -- -- 2.1 1.084402455 C455 5/8 15.88 -- -- 2.4 1.1

84402456 C456 3/4 19.05 -- -- 3.7 1.7



(In.) (mm) (In.) (mm) (Lbs.) (Kg)

84401303 C303 3/8 9.53 .025 .63 3.3 1.684401304 C304 1/2 12.70 .030 .76 5.1 2.484401305 C305 5/8 15.88 .030 .76 6.4 3.0

84401306 C306 3/4 19.05 .030 .76 7.7 3.6

Bands -- 100 feet per package84402353 C353 3/8 9.53 -- -- .8 .484402354 C354 1/2 12.70 -- -- 2.1 1.084402355 C355 5/8 15.88 -- -- 2.4 1.1

84402356 C356 3/4 19.05 -- -- 3.7 1.7

RSC # Catalog # Width Pkg. Qty. Weight

(In.) (mm) (Lbs.) (Kg)

C720 1/4 6.35 50 .3 .1C722 3/8 9.53 50 .5 .2

84402724 C724 1/2 12.70 25 .5 .2C725 5/8 15.88 25 .8 .4

C726 3/4 19.05 25 .9 .4

137

Band-It Jr. Preformed ClampsThe Band-ItJr. Preformedclamp is vibra-tion-resistant

and requires no hammer-ing or crimping. It is auto-matically locked in onesimple lever movement.Band-It Jr. Preformedclamps are available inType 201 and galvanizedcarbon steel in five differ-ent widths. Other materi-als available on specialorder.

Clamps

Band Width 1/4" (6.4mm) & Thickness .20" (.51mm)RSC # Type 201

Stainless RSC # GalvanizedCarbon

Clamp ID Pkg.Qty.

Weight


84405240 J240 N/A 3/4 19.1 100 .9 .484405242 J242 N/A 1 25.4 100 2.1 1.084405241 J241 N/A 1-3/8 34.9 100 2.5 1.184405252 J252 N/A 1-1/2 38.1 100 2.6 1.284405253 J253 N/A 2 50.8 100 3.2 1.5

J256 N/A 2-3/4 69.9 100 3.8 1.7J244 N/A 3 76.2 100 4.2 1.9J257 N/A 3-1/2 88.9 100 4.6 2.1

J259 N/A 4-1/2 114.3 100 5.7 2.6

Band Width 3/8" (9.5mm) & Thickness .26" (.64mm)84405201 J201 84405301 J301 13/16 20.6 100 3.6 1.684405243 J243 J343 1 25.4 100 3.9 1.884405202 J202 J302 1-3/8 34.9 100 4.7 2.1

J245 J345 2 50.8 100 5.5 2.5J246 J346 3 76.2 100 7.5 3.4J255 N/A 3-1/4 82.5 100 8.2 3.7

J248 N/A 4 101.6 100 9.5 4.3

Band Width 1/2" (12.7mm) & Thickness .30" (.76mm)84405203 J203 J303 1 25.4 100 6.5 3.084405204 J204 84405304 J304 1-3/8 31.8 100 7.2 3.3

J236 J336 1-3/4 44.6 100 8.7 4.0J230 J330 2-3/4 69.9 100 11.3 5.1

84405249 J249 N/A 4 101.6 100 14.9 6.8

Band Width 5/8" (15.9mm) & Thickness .30" (.76mm)84405205 J205 84405305 J305 1-1/2 38.1 100 10.4 4.784405206 J206 84405306 J306 1-3/4 44.5 100 11.3 5.184405207 J207 J307 2 50.8 100 12.2 5.584405208 J208 84405308 J308 2-1/4 57.2 100 13.3 6.0

84405209 J209 J309 2-1/2 63.5 100 13.9 6.3

Band Width 3/4" (19.1mm) & Thickness .30" (.76mm)J227 J327 2 50.8 100 14.9 6.8J229 J329 2-1/2 63.5 100 17.0 7.7

84405210 J210 J310 2-3/4 69.9 50 9.2 4.284405211 J211 J311 3 76.2 50 9.7 4.484405212 J212 84405312 J312 3-1/2 88.9 50 10.8 4.984405213 J213 84405313 J313 4 101.6 25 6.1 2.884405214 J214 84405314 J314 4-1/2 114.3 25 6.7 3.084405215 J215 J315 5 127.0 25 7.2 3.3

J270 J370 5-1/4 133.4 25 7.4 3.484405216 J216 J316 6 152.4 25 8.2 3.784405218 J218 J318 7 177.8 25 10.2 4.6

J219 J319 8 203.2 25 11.0 5.0

138

Ultra-Lok Smooth I.D. ClampsBand-It's Ultra-Lok clamps are made from 3/4"1/4 hard, high tensile 201 stainless steel forunequalled strength and reliability. They form abond stronger than crimp and swage systemsat a much lower cost. They seal assembliestight with a gap-free seal that resists rotation onpole applications, since the seal locks under fulltension.

Clamps

Center Punch ClampsBand-It's CP Series ofclamps are available in 201stainless steel or heat-treatedgalvanized carbon steel. Bothstyles of clamps come with a201 stainless steel buckle formaximum strength. Theclamps are locked with astandard conical punch,ensuring a strong, powerfullock for reliable clamping. ACenter Punch Tool (Mfg.#T300) is available.

Scru-Seal ClampsBand-It's Scru-Seal Series can be tensioned with just a screwdriver. 3/8" or 1/2" wide stainless steel bands are usedsingle- or double-wrapped, cut as needed from the 100' roll. They can be used around objects as small as 2" in diame-ter. They are also available in Clamp-Pak that allow the user to make their own clamps (2" to 38" in diameter).

RSC # 844-5810, Mfg. #M210 Scru-Seals and racks, 100' (30.5m), 3/8" Pkg: 1 set of 25, 4.3 lbs. (1.9kg).RSC #844-5811, Mfg. #M211 Scru-Seals and racks. Pkg: 10, .7 lbs. (.3kg).RSC #844-5818, Mfg. #M218 Set: 10' (3m) bands, 3 racks and 3 seals. Pkg: 10, 5 lbs. (2.3 kg)

RSC # Catalog # Clamp ID Pkg. Qty. Weight


84407227 UL227 2 50.8 100 14.9 6.884407210 UL210 2-3/4 69.9 50 9.2 4.2

UL211 3 76.2 50 9.7 4.484407212 UL212 3-1/2 88.9 50 10.8 4.9

UL213 4 101.6 25 6.1 2.884407214 UL214 4-1/2 114.3 25 6.7 3.0

UL215 5 127.0 25 7.2 3.3UL270 5-1/2 139.7 25 7.3 3.3UL216 6 152.4 25 8.2 3.7UL217 6-1/2 165.1 25 10.2 4.6

84407218 UL218 7 177.8 25 10.6 4.8UL219 8 203.2 25 11.0 5.0

84407228 UL228 9 228.6 10 5.5 2.5

RSC # Catalog # Clamp ID Band Width Pkg.Qty.

Weight

(In.) (mm) (In.) (mm) (Lbs.) (Kg)

CP03 13/16 20 3/8 9.5 100 3.6 1.684407005 CP311 1-3/8 35 3/8 9.5 100 4.6 2.184406400 CP04 1 25 5/8 16 100 8.3 3.8

CP05 1-1/4 32 5/8 16 100 8.7 4.0CP06 1-1/2 38 5/8 16 100 9.7 4.4CP07 1-3/4 44 5/8 16 100 10.6 4.8CP08 2 51 5/8 16 100 11.5 5.2CP09 2-1/4 57 5/8 16 100 12.6 5.7CP10 2-1/2 64 5/8 16 50 6.8 3.1CP11 2-3/4 70 5/8 16 50 7.3 3.3CP12 3 76 5/8 16 50 7.7 3.5CP14 3-1/2 89 5/8 16 50 8.7 4.0CP16 4 102 5/8 16 25 4.9 2.2CP18 4-1/2 114 5/8 16 25 5.5 2.5CP20 5 127 5/8 16 25 5.9 2.7CP24 3 152 5/8 16 25 6.8 3.1CP28 7 178 5/8 16 25 7.4 3.4

CP32 8 203 5/8 16 25 8.2 3.7

139

Female Swivel Hose NipplesBand-It's female hose nipples also have a distinctive design. The nut end has a conical seat to seal withthe Band-It Male Hose Nipple, and the large diameter hole provides maximum flow.

Male Hose NipplesBand-It’s distinctive design assures the user of a tight fitting connection with excellent sealing charac-teristics, maximum flow, low profile and superior performance when used with Band-It clamping sys-tems. These screw machined nipples have National Pipe Threads. They are available in plated carbonsteel, or Type 316 stainless steel, for use in more corrosive conditions.

Hose Nipples

Male Hose Nipples (12 per pkg., 1 clamp per nipple) -- Plated Carbon Steel, NPT

RSC # CatalogNo.

Hose ID NPT Diam. Of Hole Shank Length Weight

(In.) (mm) Inches (In.) (mm) (In.) (mm) (Lbs.) (Kg)

84403004 E004 1/4 6.35 1/8 .188 4.78 .87 22.23 .4 .284403006 E006 1/4 6.35 1/4 .188 4.78 1.03 26.19 .8 .384403008 E008 3/8 9.53 1/8 .234 5.94 1.07 27.20 .6 .384403010 E010 3/8 9.53 1/4 .234 5.94 1.07 27.20 .7 .384403012 E012 3/8 9.53 3/8 .234 5.94 1.07 27.20 1.2 .584403014 E014 3/8 9.53 1/2 .234 5.94 1.07 27.20 2.0 .984403018 E018 1/2 12.70 1/4 .266 6.76 1.35 34.29 1.4 .684403020 E020 1/2 12.70 3/8 .359 9.12 1.35 34.29 1.3 .684403022 E022 1/2 12.70 1/2 .375 9.53 1.35 34.29 2.1 .984403028 E028 5/8 15.88 1/2 .500 12.70 1.36 34.54 2.0 .984403030 E030 5/8 15.88 3/4 .500 12.70 1.36 34.54 2.6 1.284403032 E032 3/4 19.05 1/2 .500 12.70 1.38 35.15 3.0 1.484403034 E034 3/4 19.05 3/4 .625 15.88 1.38 35.15 2.8 1.384403036 E036 3/4 19.05 1 .625 15.88 1.38 35.15 4.1 1.984403038 E038 1 25.40 3/4 .750 17.86 1.78 45.31 4.0 1.884403040 E040 1 25.40 1 .875 22.23 1.78 45.31 4.6 2.184403042 E042 1-1/4 31.75 1 .922 23.42 1.78 45.31 7.3 3.384403044 E044 1-1/4 31.75 1 1/4 1.109 28.17 1.78 45.31 8.2 3.7

84003046 E046 1-1/2 38.10 1 1/2 1.344 34.14 1.90 48.49 11.5 5.2

Male Hose Nipples (12 per pkg., 1 clamp per nipple) -- Type 316 Stainless Steel, NPT84403606 E606 1/4 6.35 1/4 .188 4.78 1.03 26.19 .06 .0384403612 E612 3/8 9.53 3/8 .234 5.94 1.07 27.20 .09 .0484403622 E622 1/2 12.70 1/2 .375 9.53 1.35 34.29 .19 .0984403634 E634 3/4 19.05 3/4 .625 15.88 1.38 35.15 .35 .11

84403640 E640 1 25.40 1 .875 22.23 1.78 45.31 .38 .17

RSC # CatalogNo.

Hose ID/NPSC Shank Length Weight

(In.) (mm) (In.) (mm) (Lbs.) (Kg)

84403106 E106 1/4 6.35 1.06 27.0 .7 .384403112 E112 3/8 9.53 1.31 33.4 1.2 .684403122 E122 1/2 12.70 1.37 34.9 3.0 1.384403134 E134 3/4 19.05 1.37 34.9 3.0 1.3

84403140 E140 1 25.40 1.71 43.7 4.1 1.8

140

Hose Nipples

Hose Menders MachinedA machined-steel mender that repairs leaking hose quickly and easily. The short length of thesemenders makes them particularly suitable for use on hose reels.

Tri-Lokt Hose NipplesBand-It's exclusive Tri-Lokt design is the answer for heavy-duty industrial hose applications, including sin-gle and double wire braid hose. The nipple should be used when a positive lock is required between theclamp and the nipple. The locking yoke or tie assembly, together with the Band-It clamp, accomodates a

wide variety of wall thicknesses. Tri-Lokt nipples have an end knob for better holding strength. The unique yoke or tiestrip clamps to the hose for a secure lock, and the end tabs provide an additional lock by bending back over the firstclamp a second time. The nipples and accessories are available in plated carbon steel and type 316 stainless steel,and replacement yokes and strips are available.

Hose Menders Machined (12 per pkg., 2 clamp per stem

RSC # CatalogNo.

Hose ID/NPSC Shank Length Weight

(In.) (mm) (In.) (mm) (Lbs.) (Kg)

84404106 F106 1/4 6.35 .91 23.0 .01 .00584404108 F108 3/8 9.53 .95 24.0 .03 .0284404110 F110 1/2 12.70 1.16 29.5 .05 .0384404112 F112 5/8 15.88 1.18 29.9 .07 .0484404114 F114 3/4 19.05 1.20 30.4 .11 .05

84404116 F116 1 25.40 1.53 38.9 .15 .07

Tri-Lokt Nipples with Yokes -- Plated Carbon Steel, NPT

RSC # CatalogNo.

Hose ID NPT Shank Length Clamps Pkg. Qty. Weight(In.) (mm) Inches (In.) (mm) Per Nipple (Lbs.) (Kg)

84403806 H106 1/4 6.35 1/4 1.06 26.9 2 12 1.4 .684403822 H122 1/2 12.70 1/2 1.25 31.8 2 12 3.0 1.484403834 H134 3/4 19.05 3/4 1.50 38.1 2 12 4.8 2.2

84403840 H140 1 25.40 1 1.50 38.1 2 12 7.8 3.5

Tri-Lokt Nipples with Tie Strips -- Plated Carbon Steel, NPT, Swaged84403844 H610 1-1/2 38.10 1-1/2 2.75 69.9 4 1 1.4 .784403846 H620 2 50.8 2 2.75 69.9 4 1 2.1 1.084403848 H630 2-1/2 63.5 2-1/2 4.50 114.3 6 1 3.8 1.784403850 H640 3 76.2 3 4.50 114.3 6 1 5.0 2.384403852 H650 4 101.6 4 4.50 114.3 6 1 6.8 3.1

84403856 H658 6 152.4 6 8.00 203.2 10 1 16.9 7.7

Tri-Lokt Nipples with Tie Strips -- Type 316 Stainless Steel, NPT, Swaged84403910 S610 1-1/2 38.1 1-1/2 2-3/4 69.8 4 1 1.4 .684403920 S620 2 50.8 2 2-3/4 69.8 4 1 2.1 .984403930 S630 2-1/2 63.5 2-1/2 4-5/8 117.5 6 1 3.5 1.684403940 S640 3 76.2 3 4-5/8 117.5 6 1 4.6 2.1

84403950 S650 4 101.6 4 4-5/8 117.5 6 1 6.8 3.1

141

Hose Clamps

Worm Drive ClampsEach of Ideal's Standard clamps are constructed with bands and housings of 300 series stainless steel and bands thatare a full 9/16" width. Their completely mechanical design creates an interlocked construction. The one-piece housinglocks directly into the band, utilizing the full strength of the material for maximum anti-shear protection. Ideal'sSnaplock clamps are quickly and easily opened and closed. This swivel-action locking of the screw makes installationmuch easier, especially in "closed" systems, where the clamp must be opened to be applied.

54 Series -- Combo-Hex• 3/8" Hex head, collared screw• 300 series stainless steel band and housing• Zinc-plated carbon steel screw

68 Series -- Hy-Gear• 5/16" Hex head screw• 300 series stainless steel band and housing• 400 series stainless screw (with

magnetic properties

50 Series -- Hy-Gear• 5/16" Hex head screw• 300 series stainless steel band and housing• Zinc-plated carbon steel screw

63 Series -- Hy-Gear• 5/16" Hex head screw• 300 series stainless steel band, housing

and screw• Marine-grade quality for corrosive

environments

54 Series -- Snaplock• 5/16" Hex head screw• 300 series stainless steel band and housing• Zinc-plated carbon steel bridge and screw

IDEAL PART NO. CLAMP DIAMETERS

RSC # Cat. No. Min. In. Max. In. Min. mm Max. mm

00105406 5406 3/8 7/8 10 2200105408 5408 7/16 1 11 2500105410 5410 1/2 1-1/8 13 2800105412 5412 1/2 1-1/4 13 3200105416 5416 3/4 1-1/2 19 4000105420 5420 3/4 1-3/4 19 4400105424 5424 1 2 26 5000105428 5428 1-5/16 2-1/4 34 5700105432 5432 1-9/16 2 1/2 40 6400105436 5436 7/8 2-3/4 23 7000105440 5440 1-1/8 3 29 7600105444 5444 1-5/16 3-1/4 34 8200105448 5448 1-5/8 3-1/2 42 9000105648 5648 1-5/8 3-1/2 42 9000105452 5452 1-7/8 3-3/4 48 9500105456 5456 2-1/8 4 54 10000105464 5064 2-5/8 4-1/2 67 11400105472 5072 3-1/8 5 50 13000105480 5080 4 7 102 17800105488 5088 5-7/8 7-3/4 150 19500105496 5096 2-5/16 8-1/2 60 21500106104 50104 2-5/16 9-1/4 60 23500106128 56128 2-5/16 10 60 25400106152 56152 2-5/16 10-3/4 60 273

00106188 56188 2-5/16 11-1/2 60 292

IDEAL PART NO. CLAMP DIAMETERS

RSC # Cat. No. Min. In. Max. In. Min. mm Max. mm

00106806 6806 3/8 7/8 10 2200106808 6808 7/16 1 11 2500106810 6810 1/2 1-1/8 13 2800106812 6812 1/2 1-1/4 13 3200106816 6816 3/4 1-1/2 19 4000106820 6820 3/4 1-3/4 19 4400106824 6824 1 2 26 5000106828 6828 1-5/16 2-1/4 34 5700106832 6832 1-9/16 2-1/2 40 6400106836 6836 7/8 2-3/4 23 70

6840 1-1/8 3 29 7600106844 6844 1-5/16 3-1/4 34 82

6848 1-5/8 3-1/2 42 9000106852 6852 1-7/8 3-3/4 48 95

6856 2-1/8 4 54 1006864 2-5/8 4-1/2 67 114

00106872 6872 3-1/8 5 50 1306880 3-5/8 5-1/2 92 1406888 4-1/4 6 108 150

00108188 63188 2-5/16 12-1/4 60 3116896 4-3/4 6-1/2 121 165

00108104 68104 4 7 102 17800108128 63128 2-5/16 8-1/2 60 21500108140 63140 2-5/16 9-1/4 60 235

00108152 63152 2-5/16 10 60 254

142

ExpansionJoints

Non-Metallic Expansion JointsHolz Expansion Joints are designed specifically to absorb motion and displacement between pipe flanges. Thesehand-crafted, one-piece elastomeric expansion joints feature an exclusive H-R Double Protected Construction, withreinforcing rings or wire tied in place by extra plies over the arch, where strength is needed most. Expansion joints canabsorb, prevent or compensate for a number of potential problems, including axial stresses, misalignments, shock orvibration, electrolytic action and pressure surges. Wherever your piping system, Holz can help you gain efficiency,longer system service life and higher shock and vibration resistance and greatly reduce chances of catastrophic failure.

RSC # Part # Nom. I.D. Pressure Ratings22801412 300-555 13 to 14 inches 225 Pos. PSIG -- 15" Neg. HG

150 Pos. PSIG -- 30" Neg. HG130 Pos. PSIG -- 30" Neg. HG125 Pos. PSIG -- 30" Neg. HG25 Pos. PSIG -- 15" Neg. HG

RSC # Part # Nom. I.D. Maximum Movements22800306 980-111 3 x 6 in. (80 x 150 mm) 1-3/16" comp. - 3/8" ext. - 1/2" lat. - 15°22800406 980-111 4 x 6 in. (100 x 150 mm) 1-3/16" comp. - 1/2" ext. - 1/2" lat. - 15°22800606 980-111 6 x 6 in. (150 x 150 mm) 1-3/16" comp. - 1/2" ext. - 1/2" lat. - 15°

#980-111 Expansion Joints

#300-555 Expansion Joints

PneumaticFittings

143

General PurposeParker's general purpose pneumatic couplings are designed to mate with interchanges common in industrial, automo-tive and instrumentation markets.

Interchange: Industrial, Tru-Flate, ARO 210, Lincoln "Long Stem"Operation: ManualSize: 1/4" to 1/2"Material: Brass and/or SteelLocking Mechanism: Ball LockRated Pressure: Up to 300 psi

30 Series

10 Series

Parker's pneumatic couplings, also called single shut-off (SSO) couplings, are typically used incompressed air applications to connect air tools, equipment and hoses. Additional applicationsinclude other gases and low pressure liquids. They are available in a wide range of interchanges,sizes, materials, ports and other options to satisfy most every pneumatic application.

20 Series

Interchange: Industrial, Tru-Flate and ARO 210Operation: Push-to-ConnectSize: 1/4" to 3/4"Material: Brass and/or SteelLocking Mechanism: Ball Lock, Pawl LockRated Pressure: Up to 300 psi

BG Series

Size: 1/4" NPTF and MBSPP PortMaterial: High Impact Plastic Handles (Multiple Colors)Locking Mechanism: Pawl LockRated Pressure: Up to 1500 psiNozzles: Venturi and Rubber TipOperation: Lever Actuation

Blow GunsParker's BG series blowguns are available with either full pressure or OSHA approved nozzles. A maximum flowadjustment option is also provided.

144

HydraulicFittings

General PurposeParker's general purpose hydraulic couplings are used primarily for the transfer of hydraulic fluid, and can also be usedwith chemicals, water, steam and some gases.

60 Series

Parker's hydraulic couplings are available in a wide variety of designs, each tailored to a specificapplication. Based on valving, hydraulic couplings are generally either Double Shut-Off or Straight-Thru. Double Shut-Off couplings contain shut-off valves in both halves, body and nipple and are used extensively when loss of fluid is undesirable. Straight-Thru couplings have no valves in eitherhalf and are ideal for maximum flow applications.

Size: 1/8" to 2-1/2"Material: Brass, Steel, Carbon Steel and Stainless SteelLocking Mechanism: Ball LockRated Pressure: Up to 6000 psiRated Flow: Up to 200 GPMTemperature Range: -40° to 250°

ST Series

High FlowParker's high flow couplings are used where maximum flow with lowest pressure drop is desired, such as for high pres-sure washers, mobile water tank lines, or connecting hose lines to hydro-blasting equipment.

Size: 1/4" to 1-1/2"Material: Brass, Steel, Nickel Plated Steel and Stainless SteelLocking Mechanism: Ball LockRated Pressure: Up to 15,000 psiRated Flow: Up to 200 GPMTemperature Range: -40° to 250°

145

Brass PneumaticFittings and

Valves

Brass Flared FittingsParker's economical SAE 45° brass fittings are designed to resist mechanical pullout. Theycan be assembled and disassembled repeatedly. They are ideal for use with copper, brass,aluminum and welded steel hydraulic tubing that can be flared, or as an SAE hose adapter.

Working Pressure: 450 to 2800 psi (tubing dependent)Temperature Range: -65° to 250°

PrestolokPrestolokOne-piece brass fittings are designed for use with polyethylene, nylon or soft metal tubing, and polyurethane tubingwith an internal tube support.

Working Pressure: Vacuum to 300 psi (tubing and temperature dependent)Temperature Range: 0° to 200°

Prestolok IICompact one-piece fittings with an engineered plastic body and brass/stainlesssteel components. For use with nylon, polyethylene and polyurethane tubing.

Working Pressure: Vacuum to 150 psi (tubing and temperature dependent)Temperature Range: 0° to 150°

Prestolok I (right) and II (left) Series

Poly-TiteParker's Poly-Tite compact brass compression fittings have exclusive sleeves that grip plastictubing when system pressure exceeds the tubing's burst point. It is designed for use with high-quality thermoplastic and soft metal tubing.

Working Pressure: Up to 150 PSI (thermoplastic) or 300 PSI (soft metal)Temperature Range: 0° to 150° (thermoplastic) or 0° to 175° (soft metal) Poly-Tite Series

146

Brass IndustrialConnectors

CompressionParker's economical brass compression fittings are designed for use with copper,brass, aluminum and thermoplastic tubing.

Working Pressure: 75 to 400 psi (tubing dependent)Temperature Range: -65° to 250° Compression

Fittings

Compress-AlignParker's captive sleeve compression-type fittings seal even out-of-round tubing.They work well with copper, brass, aluminum and thermoplastic tubing.

Working Pressure: 350 to 2800 PSI (tubing dependent)Temperature Range: -65° to 250° Compress-Align

Series

Pipe FittingsParker's brass pipe fittings meet all functional SAE J512 industry requirements, withall threads made to Dryseal standards. They work well with brass, copper or iron pipe.

Working Pressure: Up to 1000 PSI (tubing dependent)Temperature Range: -65° to 250° Pipe Fittings

147

Metal Crimp-StyleHose Fittings

FlangesParker's flanges are available in SAE Code 61, Code 62 and Caterpillar style. They come inan array of bent tube configurations and sizes, including jump sizes.

Material: SteelSizes: 1/2" through 1-1/2"Pressure: Up to 6000 PSI

Flanges

Seal-LokParker's Seal-Lok fittings are designed with a flat face and O-ring to create the optimal sealfor leak-free hydraulic applications.

Material: Steel and Stainless SteelSizes: 1/4" through 1-1/2"Pressure: Up to 6000 PSI

Seal-Lok Series

MetricParker's metric fittings are available iin DIN, BSP, ISO, French and JIS configurations.

Material: SteelSizes: 1/4" (4mm) through 2" (38mm)Pressure: Up to 6000 PSI Metric Series

JIC/37° - SAE/45° FittingsParker's flared fittings come in shapes and sizes to meet most connection requirements.They incorporate a dull seat in most sizes except in '6 and '12 (3/8" and 3/4").

Material: Steel, Brass and Stainless SteelSizes: 1/4" through 2"Pressure: Up to 6000 PSI

JIC/37° - SAE/45°Series

148

Metal Crimp-StyleHose Fittings

SAE Straight Thread FittingsParker's straight threads hold fittings in place while the O-ring forms a leak-free connection.

Material: Steel and BrassSizes: 1/4" through 1-1/4"Pressure: Up to 6000 PSI

SAE Straight ThreadSeries

Pipe FittingsParker's pipe fittings create a metal-to-metal seal. The threads of the fitting mate with thethreads of the connecting port or coupling.

Material: Steel, Brass and Stainless SteelSizes: 1/4" through 2"Pressure: Up to 6000 PSI

Pipe Fittings

149

ParkrimpEquipment

KarryKrimpWeighing only 54 lbs., the Karrykrimp is designed for portability and comes standard with a handpump. Electric, air/hydraulic and battery-powered units are also available.

Capability: Through 1-1/4" SAE 100R1, 100R2, 100R3, 100R4, 100R5, 100R7, 100R8, 100R14, 100416, 100R17

Full Cycle Time: 30 seconds with electric pumpStandard Power Source: Enerpac hand pump

SuperkrimpHeavy-duty, bench-mounted machine crimps a variety of hose assemblies. Superkrimp comesstandard with your choice of power units as listed. Order dies separately to best meet your needs.

Capability: Through 2" SAE 100R1, 100R2, 100R3, 100R4, 100R5, 100R6, 100R7, 100R8, 100R9, 100R14, 100R16, 100R17. Through 1-1/2" SAE 100R12. Through 1-1/4" SAE 100R13. Through 1" SAE 100R15.

Full Cycle Time: 20 secondsStandard Power Source: 230/460V 3-phase or 230V 1-phase

Karrykrimp 2Designed for portability and increased crimping ability. A two-stage hand pump, electric, air/hydraulicor battery-powered unit is available to power the machine.

Capability: Through 1-1/4" SAE 100R1, 100R2, 100R3, 100R4, 100R5, 100R7, 100R8, 100R9, 100R12. Through 1" SAE 100R13, 100R16, 100R17

Full Cycle Time: 60 seconds with electric pumpStandard Power Source: Choice of Enerpac Power Units

150

ParkrimpEquipment

Parkrimp 1Parker's most popular bench-mounted unit is designed for easy and quick hose assemblyfabrication. Power unit, dies and die rings are standard.

Capability: Through 1-1/4" SAE 100R1, 100R2, 100R3, 100R4, 100R5, 100R7, 100R8, 100R14, 100416, 100R17

Full Cycle Time: 20 secondsStandard Power Source: 115-volt power unit

Parkrimp 2Heavy-duty floor-mounted machine crimps a full spectrum of hose assemblies. Die kit, tooling,stand and choice of listed power units are standard.

Capability: Full spectrum of hose and fittings from SAE 100R1 through SAE 100R17

Full Cycle Time: 30 secondsStandard Power Source: 230/460V 3-phase or 230V 1-phase

MinikrimpLightweight, portable, compact machine can crimp Parflex Division hose up to 1”. Has a cast alu-minum design; up to 30 tons force at 10,000 psi.

Capability: Full spectrum of hose and fittings from SAE 100R1 through SAE 100R17

Capacity: Up to 1 inch, brass or stainless steelStandard Power Source: 230/460V 3-phase or 230V 1-phase

151

Couplers andAdapters

A AdapterDescription: Male Adapter x Female ThreadSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat

aluminum, nylon, polypropyleneThreads: NPT, BSP, NPSH

PT Coupling Products are manufactured in a wide range of materials, to adapt to countless specificuses. They are designed for working pressures of 150 PSI (1/2 through 4 inch sizes) or 75 PSI (5inch and above).

B CouplerDescription: Female Coupler x Male ThreadSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat


Style Size Aluminum Brass Stainless SteelA 1/2 in. 83401008 83405008 83406008A 3/4 in. 83401012 83405012 83406012A 1 in. 83401016 83405016 83406016A 1-1/4 in. 83401020 83405020 83406020A 1-1/2 in. 83401024 83405024 83403024A 2 in. 83401032 83405032 83406032A 2-1/2 in. 83401040 -- 83406040A 3 in. 83401048 83405048 83406048A 4 in. 83401064 83405064 83406064A 5 in. 83401080 -- --

A 6 in. 83401096 -- --

Style Size Aluminum Brass Stainless SteelB 1/2 in. 83401108 83405108 83406108B 3/4 in. 83401112 83405112 83406112B 1 in. 83401116 83405116 83406116B 1-1/4 in. 83401120 83405120 83406120B 1-1/2 in. 83401124 83405124 83406124B 2 in. 83401132 83405132 83406132B 2-1/2 in. 83401140 -- 83406140B 3 in. 83401148 83405148 83406148B 4 in. 83401164 83405164 83406164B 6 in. 83401196 -- --

B 4 x 2 in. 83401240 -- --

152


C CouplerDescription: Female Coupler x Hose ShankSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat

aluminum, nylon, polypropylene

D CouplerDescription: Female Coupler x Female ThreadSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat


Style Size Aluminum Brass Stainless SteelC 1/2 in. 83401308 83405308 --C 3/4 in. 83401312 83405312 83406312C 1 in. 83401316 83405316 83406316C 1-1/4 in. 83401320 83405320 83406320C 1-1/2 in. 83401324 83405324 83406324C 2 in. 83401332 83405332 83406332C 2-1/2 in. 83401340 -- 83406340C 3 in. 83401364 83405348 83406348C 4 in. 83401380 83405364 83406364

C 6 in. 83401396 83405396 --

Style Size Aluminum Brass Stainless SteelD 1/2 in. 83401408 83405408 83406408D 3/4 in. 83401412 83405412 83406412D 1 in. 83401416 83405416 83406416D 1-1/4 in. 83401420 83405420 83406420D 1-1/2 in. 83401424 83405424 83406424D 2 in. 83401432 83405432 83406432D 2-1/2 in. 83401440 -- 83406440D 3 in. 83401448 83405448 83406448D 4 in. 83401464 83405464 83406464D 6 in. 83401480 -- --

D 4 x 2 in. 83401496 -- --

153


E AdapterDescription: Male Adapter x Hose ShankSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat,


F AdapterDescription: Male Adapter x Male ThreadSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat,


Style Size Aluminum Brass Stainless SteelE 3/4 in. 83401512 83405512 83406512E 1 in. 83401516 83405516 83406516E 1-1/4 in. 83401520 83405520 83406520E 1-1/2 in. 83401524 83405524 83406524E 2 in. 83401532 83405532 83406532E 2-1/2 in. 83401540 -- 83406540E 3 in. 83401548 83405548 83406548E 4 in. 83401564 83405564 83406464E 6 in. 83401580 -- --

E 4 x 2 in. 83401596 -- --

Style Size Aluminum Brass Stainless SteelF 1/2 in. 83401608 83405608 83406608F 3/4 in. 83401612 83405612 83406612F 1 in. 83401616 83405616 83406616F 1-1/4 in. 83401620 83405620 83406620F 1-1/2 in. 83401624 83405624 83406624F 2 in. 83401632 83405632 83406632F 2-1/2 in. 83401640 -- 83406640F 3 in. 83401648 83405648 83406648F 4 in. 83401664 83405664 83406664

F 6 in. 83401696 -- --

154


V DustcapDescription: DustcapSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat


W DustplugDescription: DustplugSizes: 1/2" through 12"Materials: Aluminum, brass, stainless steel, carbon steel, ductile iron, hard coat


Style Size Aluminum Brass Stainless SteelA 1/2 in. 83401008 83405008 83406008A 3/4 in. 83401012 83405012 83406012A 1 in. 83401016 83405016 83406016A 1-1/4 in. 83401020 83405020 83406020A 1-1/2 in. 83401024 83405024 83403024A 2 in. 83401032 83405032 83406032A 2-1/2 in. 83401040 -- 83406040A 3 in. 83401048 83405048 83406048A 4 in. 83401064 83405064 83406064A 5 in. 83401080 -- --

A 6 in. 83401096 -- --

Style Size AluminumW 1/2 in. 83401808W 3/4 in. 83401812W 1 in. 83401816W 1-1/4 in. 83401820W 1-1/2 in. 83401824W 2 in. 83401832W 2-1/2 in. 83401840W 3 in. 83401848W 4 in. 83401864W 6 in. 83401880

W 4 x 2 in. 83401896

155

Clamps

Punch-Lok Preformed ClampsPunch-Lok preformed punch-type clamps are double-wrapped and triple-locked to hold things tight-ly, securely and permanently. They are available in various materials to suit any need. High-carbonelectro-galvanized steel clamps will satisfy nearly all requirements, while stainless steel clamps(shown below) work well in more corrosive situations. Everdur copper-base clamps are also avail-able on special order. To order, measure the outside diameter of the hose, with its fitting inserted.Then select the next larger inside diameter clamp. Clamps are available in sizes from 13/16" to 8".

P-1 Clamp Locking ToolRSC #94400005Designed for fast, economical application of Punch-Lok clamps in hose assembly andshop use, maintenance and repairs on-site. This very portable tool weighs just 2-1/2pounds and is made of a drop-forged and plated tempered steel construction. The com-fortable ball handle adjusts for tensioning clamps. Simply insert the clamp in the tool,position the hose in the clamp (with nipple already inserted), and strike the punch headwith a mallet to seal.

RSC # Mfg. No. Inside Diameter Band Width Clamps/Ctn. Weight/Ctn.84407108 P-4-S 1 in. 5/8 in. 100 6.1 lbs.84407112 P-6-S 1-1/2 in. 5/8 in. 100 8.1 lbs.84407116 P-8-S 2 in. 5/8 in. 100 9.6 lbs.84407122 P-11-S 2-3/4 in. 5/8 in. 50 5.8 lbs.84407124 P-12-S 3 in. 5/8 in. 50 6.2 lbs.84407128 P-16-S 4 in. 5/8 in. 25 4.0 lbs.84407130 P-18-S 4-1/2 in. 5/8 in. 25 4.6 lbs.84407132 P-20-S 5 in. 5/8 in. 25 4.8 lbs.84407134 P-24-S 6 in. 5/8 in. 25 5.1 lbs.

84407136 P-28-S 7 in. 5/8 in. 50 12.0 lbs.

AUGUSTA, GA601 LANEY WALKER BLVD. P.O. BOX 1727AUGUSTA, GA 30901PHONE (706) 724-7792FAX (706) 724-8409

www.rsci.com Toll Free 1-800-282-8556

RSCI Rubber Division Catalog ©2009

SAVANNAH, GA117 PARK OF COMMERCE DR.SAVANNAH, GA 31405PHONE (912) 920-2760FAX (9126) 920-2762

FLORENCE, SC2325 PROSPERITY WAYFLORENCE, SC 29501PHONE (843) 413-1853FAX (843) 413-9854

Conveyor Belt, Belting and Rubber Hose and Fittings Catalog

Documents

Transcript of Conveyor Belt, Belting and Rubber Hose and Fittings Catalog