Conveyor and Process Belts...1,30 2,00 2,50 2,90 2,90 3,40 2,20 2,50 3,10 3,00 3,00 2,85 1,60 2,40...
Transcript of Conveyor and Process Belts...1,30 2,00 2,50 2,90 2,90 3,40 2,20 2,50 3,10 3,00 3,00 2,85 1,60 2,40...
Profiles Round & Vee belts
Flat belts Buckets
Conveyor and Process Belts
esbelt.com
esbeltConveyor belts
2021-2022
A12 G2FA12 G2RA13 QFA15 G2FA15 QFA15 W3FA20 AFA20 G2FA24 QFA33 QF
Ast
er
BX10 UFMTB12 UFV
B20 UFV
B21 UF MTBKV
B22 UF TRV
B07 CFB12 CFB12 CKB20 CFB20 CKB20 FFB22 CFB23 CFB24 CFB25 CFB30 CFB33 CF
D20 CCD30 ARD30 CCD30 CRD40 CCD81 CCD90 C3R
F10 NFF15 NFF19 NFF21 AFF21 NFF22 FFF07 CC GR EUF12 CF GR EUF14 CF GR EUF20 CKF30 CFF30 RR
H12 Y1RH13 GRH18 Y1R
K40 AFK40 RFK40 UF
Bre
da
Dra
go
Industrial & General Purpose Belts
PVCPVCPVCPVCPVCPVCPVCPVCPVCPVC
55654555556575554545
Green 00Green 00Green 00Black 02Black 02Black 02Green 00Green 00Red 01
Green 00
4,003,701,704,001,705,001,204,004,503,40
Pattern G2Pattern G2Pattern QPattern G2Pattern Q
Pattern W3Pattern A
Pattern G2Pattern QPattern Q
PVC
LFRLFRLFR
0,10
0,100,100,10
FabricImpregn.
FabricImpregn.Impregn.Impregn.
FabricFabricFabricFabric
NaturalGreen 00NaturalGrey 00Grey 00Grey 00NaturalNaturalNaturalNatural
SSS
S
Feb
or
Hip
roKe
ram
PUPUPUPUPU
PVCPVCPVCPVCPVC
PVCPVCPVCPVCPVCPVC
9393939393
8282828282
824545828245
Green 09Green 09Green 09Black 01Transp.
Green 00Green 00Green 00Green 00Green 00Black 00Green 00Green 00Red 01
Green 00Green 00Green 00
0,300,300,501,501,80
0,500,500,501,001,00
2,003,004,001,002,003,00
MatSmoothSmooth
MatSmooth
SmoothSmoothSmoothSmoothSmoothFabric
SmoothSmoothSmoothSmoothSmoothSmooth
PU
PUhard PVC
PVC
PVC
0,10
0,100,10
0,70
0,70
Impregn.WP
FabricImpregn.Impregn.
FabricFabric
Pattern KFabric
Pattern KFabricFabricFabricFabricFabricFabricFabric
90
90
NaturalNaturalNaturalNaturalWhite
NaturalNatural
Green 00Natural
Green 00NaturalNaturalNaturalNaturalNaturalNaturalNatural
FDAFDAFDA
FDA
EU*EUEU
EU
PVCPVCPVCPVCPVCPVCPVC
78787878787875
Green 00Green 00Green 00Green 00Green 00Green 00Green 00
1,002,202,002,002,001,002,45
SmoothPattern ASmoothSmoothSmoothSmooth
Pattern C3
PVCPVCPVCPVCPVCPVC
hard PVC
78
78
7878
Green 00Green 00Green 00Green 00Green 00Green 00Green 00
1,000,101,000,101,001,000,10
SmoothImpregn.SmoothImpregn.SmoothSmoothImpregn.
PVCPVCPVCPVCPVCRC
PVCPVCPVCPVCPVCPVC
7682828282
8585857878
Black 04Black 01Black 01Black 01Black 01Black 00
Green 00Green 00Green 00Green 00Green 00Transp.
0,500,500,900,800,600,10
0,500,501,000,700,700,10
MatMatMat
Pattern AMat
Impregn.
SmoothSmoothSmoothSmoothSmoothImpregn.
LFRLFRLFRLFRLFR
PVC
PVC
PVC
85
90
NaturalGrey 00Grey 00Grey 00Grey 00Grey 00
Green 00NaturalNatural
Green 00NaturalTransp.
0,100,100,100,100,10
0,30
0,70
0,10
FabricImpregn.Impregn.Impregn.Impregn.Impregn.
SmoothFabricFabric
Pattern KFabric
Impregn.
SSS
S
HPVCHPVCHPVC
757575
Green 23Green 23Green 23
0,604,800,80
Pattern Y1Pattern GPattern Y1
RCRCRC
Black 00Black 00Black 00
0,100,100,10
Impregn.Impregn.Impregn.
PUPVCPU
93
93
Green 09Black 03Green 09
1,200,10
1,00
Pattern AImpregn.Smooth
NaturalNaturalNatural
FabricFabricFabric
S
S
FDA
FDA
EU
EU
SWSWSW
= Airports & Logistic Centers Conveyor Belts.
LFR = Low Friction Resin CR = Conductive Resin WP = Low-capillary fabric “Water Proof” v = PVC between plies
S
FDAFDAFDA
EUEUEU
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
-10 (-15) +90 (110)-10 (-15) +80 (105)-10 (-15) +80 (105)
-5 (-15) +80 (105)-5 (-15) +80 (105)
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
-10 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-5 (-15) +80 (100)
-5 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-10) +80 (100)
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
Specialcharacteristics
Belt type
Material HardnessºShA
Color Thicknessmm
Finish
Top cover
Material HardnessºShA
Color Thicknessmm
Finish
Bottom cover
Ast
er
at 20ºCA
B
mm mm
A12 G2FA12 G2RA13 QFA15 G2FA15 QFA15 W3FA20 AFA20 G2FA24 QFA33 QF
BX10 UFMTB12 UFV
B20 UFV
B21 UF MTBKV
B22 UF TRV
B07 CFB12 CFB12 CKB20 CFB20 CKB20 FFB22 CFB23 CFB24 CFB25 CFB30 CFB33 CF
D20 CCD30 ARD30 CCD30 CRD40 CCD81 CCD90 C3R
H12 Y1RH13 GRH18 Y1R
K40 AFK40 RFK40 UF
2222222223
RigidRigidRigidRigidRigidRigidRigidRigidRigidRigid
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
5,505,803,205,503,207,502,905,806,406,40
4,204,003,404,203,405,003,204,006,907,00
457045455060555550
150
7090707060
100809080
200
120160120160160150200160160300
812915151014161420
12181322221620222228
20002000
2-30002000
2-30006003000200020002000
22222
122222222333
RigidRigidRigidRigidRigid
RigidRigidRigidRigid
Extra rigidRigidRigidRigidRigidRigidRigidRigid
-10 (-15) +90 (110)-10 (-15) +80 (105)-10 (-15) +80 (105)
-5 (-15) +80 (105)-5 (-15) +80 (105)
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
-10 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
1,451,602,204,004,30
1,002,102,702,903,502,404,004,806,004,004,906,00
1,601,902,604,305,10
1,102,502,953,504,002,704,805,806,904,805,807,00
94060
100100
103550557060808050
100120130
406080
200200
255550757060
10012080
120150200
120120200180200
60120120200140190200200160275300300
1010181215
510715915171514222220
1816251823
71512221520252222303028
12502000200030003000
300030002000300020003000300030002000300030003000
2333433
FlexibleFlexibleFlexibleFlexibleFlexibleFlexibleFlexible
-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)
-5 (-15) +80 (100)
4,105,606,205,407,407,807,00
5,106,507,706,509,209,608,00
140180200180300400300
140200250200350400380
200300300300400800800
20253025356555
28404040509585
2000200020002000200020003000
222222
122233
RigidRigidRigid
FlexibleFlexibleRigid
RigidRigidRigid
FlexibleFlexibleFlexible
-5 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)-10 (-15) +80 (100)
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-10) +80 (100)
1,902,102,502,702,502,40
1,302,002,502,902,903,40
2,202,503,103,003,002,85
1,602,402,903,503,503,80
354040404060
1035407590
150
556060606060
30556075
140150
120160180160160180
60120120200300300
1015176614
51010203025
1522259919
71515284540
300030003000300030003000
200030003000200020003000
223
RigidRigidRigid
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
2,206,503,20
2,505,003,70
256050
509080
120200180
101415
152022
200020002000
222
RigidRigidRigid
-10 (-15) +80 (105)-5 (-15) +80 (100)
-10 (-15) +80 (105)
4,204,004,00
4,204,204,20
14060
140
330100330
400400400
202222
303232
200020002000
A15W3F: pitch 111,5mm
Bre
da
Dra
go
Feb
or
Hip
roKe
ram
F10 NFF15 NFF19 NFF21 AFF21 NFF22 FFF07 CC GR EUF12 CF GR EUF14 CF GR EUF20 CKF30 CFF30 RR
Belt typeConstant
(intermittent)temperature
ºCWeftNº of
plies
FabricsBelt
thickness
mm
Beltweight
kg/m2
Breakingload
N/mm
Working load at
1%elongation
N/mm
Working load at1.5%
elongationN/mm
Max.roll
width
mm
Antistatic
Antistatic top cover
Antistatic bottom cover
S Low noise fabric
FDA Food quality
EU Food quality Regulation EU 10/2011
EU* Food quality Regulation 1935/2004
Low friction coefficient
Resistant to mineral oils and fats
Resistant to vegetable oils and animal fats
Resistant to vegetable oils and fats, and partially resistant to animal oils and fats
Partially resistant to vegetable and animal oils and fats
Abrasion resistant
Cut resistant
ATEX certified
Pyrolisis test
Flame retardant
SW Solid Woven
AM Anti-microbial
Anti-Hydrolysis
FL Frayless
MDX Metal & X-Ray Detectable
AMAMAMAMAM
AMAM
AM
AMAMAM
SW
Belt type
Material HardnessºShA
Color Thicknessmm
Finish
Top cover
Material HardnessºShA
Color Thicknessmm
Finish
Bottom cover
A10 G2FA21 HFA21 LFA26 X1CA26 XCA36 X1C
Ast
er
Specialcharacteristics
CS06 UFCSX06 K1FCS07 UFCS07 UFMTC07 UUCSX08 AF-BRCSX08 DFCS08 UFCS08 UFMTCS09 FFCS09 UFCS09 UFMTCS10 FFCS10 UFMTCS12 UFv
C12 UFMTv
CS20 UFMT
NS07 AYNS07 UFMTNS08 UFMTNS09 UFNS09 UFMTNS09UFMT-H-BL08NS11UFMTNS20 UFMT
CP07AY-AMCP07UFMT-AMCP09UFMT-AMCPX09UA2MT-AMCP10UFMT-AM-FL
NP07UFMT-AMNP09DF-AMNP09FFNP09UFMT-AMNP09UFMTMD-BL09NPX09UA2MT-AMNPX20UA2MT-AMNP10UFMT-AM-FL
Stan
dar
d T
PUFood conveyor belts
PVCPVCPVCPVCPVCPVC
457070737373
WhiteWhiteWhiteWhiteWhiteWhite
4,003,003,50
15,5015,5015,80
Pattern G2Pattern HPattern LProfile X1Profile X
Profile X1
FabricWPWP
SmoothSmoothSmooth
NaturalNaturalNaturalWhiteWhiteWhite
PUPUPUPUPUPUPUPUPUPUPUPU
PUPUPUPU
PUPUPUPUPUPUPUPU
PUPUPUPUPU
86868686
86868686
8686
86869393
8686868686939393
8585858585
Ocher 01Ocher 01
WhiteWhite
Green 16Brown 00
WhiteWhiteWhite
NaturalWhiteWhite
NaturalWhiteWhiteWhiteWhite
Blue 06Blue 06Blue 06Blue 06Blue 06Blue 08Blue 06Blue 06
WhiteWhiteWhiteWhiteWhite
0,250,320,250,250,100,500,500,250,250,100,250,25
0,400,300,300,80
0,600,250,250,250,250,250,600,80
0,600,250,250,300,25
SmoothPattern K1Smooth
MatImpregn.Pattern APattern DSmooth
MatW Impregn.
SmoothMat
Cotton-Poly.Mat
SmoothMatMat
Pattern AMatMat
SmoothMatMatMatMat
Pattern AMatMatMatMat
PUPUPUPUPUPUPUPUPUPUPUPU
PU
PU
PUPUPUPUPUPUPUPU
PUPUPUPUPU
0,100,100,100,100,100,100,100,100,100,100,100,10
0,10
0,10
0,450,100,100,100,100,100,100,10
0,450,100,100,550,10
W Impregn.W Impregn.W Impregn.W Impregn.Impregn.
W Impregn.W Impregn.W Impregn.W Impregn.W Impregn.W Impregn.W Impregn.Cotton-Poly.W Impregn.
WPWP
W Impregn.
Pattern YW Impregn.W Impregn.W Impregn.W Impregn.W Impregn.W Impregn.W Impregn.
Pattern YW Impregn.W Impregn.Pattern A2
W Impregn.
NaturalNaturalNaturalNatural
Green 16NaturalNaturalNaturalNaturalNaturalNaturalNaturalNaturalNaturalNaturalNaturalNatural
Blue 06NaturalNaturalNaturalNaturalNaturalNaturalNatural
WhiteBlue 10Blue 10White
Natural
FDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDA
FDAFDAFDAFDAFDAFDAFDAFDA
FDAFDAFDAFDAFDA
EUEU*EUEUEU*EU*EUEUEUEUEUEUEUEUEUEUEU
EUEUEUEUEUEUEUEU
EUEUEUEUEU
FDAFDAFDAFDAFDAFDA
EUEUEUEUEUEU
86
PUPUPUPUPUPUPUPU
8585
8585858585
Blue 06Blue 06Blue 10Blue 06Blue 09Blue 06Blue 06Blue 06
0,250,500,100,250,250,300,500,25
MatPattern D
W Impregn.MatMatMatMatMat
PUPUPUPUPUPUPUPU
Blue 10Blue 10Blue 10Blue 10Blue 10Blue 06Blue 06Natural
0,100,100,100,100,100,550,950,10
W Impregn.W Impregn.W Impregn.W Impregn.W Impregn.Pattern A2Pattern A2
W Impregn.
FDAFDAFDAFDAFDAFDAFDAFDA
EUEUEUEUEUEUEUEU
Prem
ium
TPU
C07 CFC07 JFC12 CFC12 DFC13 FFC16 FFC17 CFC20 CFC20 CKC21 CKC22 CFC30 CFC30 CK
Clin
a (P
VC
)
85
PVCFeltPVCPVC
PVCPVCPVCPVCPVCPVCPVC
70
7070
76707070707070
WhiteWhiteWhiteWhite
NaturalNaturalWhiteWhiteWhiteWhiteWhiteWhiteWhite
0,50
0,500,70
1,000,801,500,502,000,801,50
SmoothFelt
SmoothPattern D
FabricCotton-Poly.
SmoothSmoothSmoothSmoothSmoothSmoothSmooth
hard PVC
PVCPVC
PVC
9090
90
0,10
0,700,70
0,70
WPFabricWPWP
FabricCotton-Poly.Impregn.
WPPattern KPattern K
WPWP
Pattern K
NaturalNaturalNaturalNaturalNaturalNaturalWhite
NaturalWhiteWhite
NaturalNaturalWhite
FDA
FDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDA
EU
EUEUEUEUEUEUEUEUEUEUEU
PVCPVCPVC
737373
1,001,000,70
FL
8585
MD
FL
85
v = PVC between plies W impregn. = Impermeabilized fabrics (Wicking Test G11) WP = Low-capillary fabric “Water Proof” (Wicking Test G11)
SW
Belt type
Ast
er
Constant(intermittent)temperature
ºCWeftNº of
plies
FabricsBelt
thickness
mm
Beltweight
kg/m2
at 20ºCA B
mm mm
Breaking load
N/mm
Working load at
1%elongation
N/mm
Working load at1.5%
elongationN/mm
Max.roll
width
mm
A10 G2FA21 HFA21 LFA26 X1CA26 XCA36 X1C
11111111122222222
11122222
11222
RigidRigidRigidRigidRigidRigidRigidRigidRigidRigidRigidRigid
FlexibleRigidRigidRigidRigid
RigidRigidRigidRigidRigidRigid
Extra rigidRigid
RigidRigidRigidRigidRigid
-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-25) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-25) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-25) +90 (110)-15 (-20) +90 (110)-10 (-15) +80 (105)-10 (-15) +80 (105)-10 (-15) +90 (110)
-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-15 (-20) +90 (110)-10 (-15) +90 (110)-10 (-15) +90 (110)-10 (-15) +90 (110)
-25 (-30) +90 (110)-25 (-30) +90 (110)-25 (-30) +90 (110)-25 (-30) +90 (110)-25 (-30) +90 (110)
0,750,820,750,750,451,201,201,001,001,201,451,451,401,651,601,502,60
1,550,751,001,451,451,452,402,60
1,550,751,202,101,60
0,800,900,800,800,301,101,101,001,001,201,651,651,101,951,901,703,10
1,300,801,001,651,651,652,903,10
1,250,801,352,201,65
454486666566
108
202060
104666
103060
1046
3010
151515158202020205303010405050
100
10152030303050
100
1015305050
606060606050505050120120120110120120120200
606050120120120140200
606010010080
55555444488868101012
554888612
55896
777776666121212812161618
7761212121018
7711159
22001250220022003000125013002200220022002200220022002200 200030002100
20002200220022002200220022002100
20002200220012502200
-25 (-30) +90 (110)-25 (-30) +90 (110)-25 (-30) +90 (110)-25 (-30) +90 (110)-10 (-15) +90 (110)-25 (-30) +90 (110)-25 (-30) +90 (110)-25 (-30) +90 (110)
-15 (-25) +80 (100)-5 (-15) +80 (100)
-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)
12222222
RigidRigidRigidRigidRigidRigidRigidRigid
0,751,601,001,201,202,103,151,60
0,801,651,001,351,352,203,201,65
46566
303010
153053030505050
6010010010010010020080
588889126
71211111115189
22002000220022002200125012502200
CS06 UFCSX06 K1FCS07 UFCS07 UFMTC07 UUCSX08 AF-BRCSX08 DFCS08 UFCS08 UFMTCS09 FFCS09 UFCS09 UFMTCS10 FFCS10 UFMTCS12 UFv
C12 UFMTv
CS20 UFMT
NS07 AYNS07 UFMTNS08 UFMTNS09 UFNS09 UFMTNS09UFMT-H-BL08NS11UFMTNS20 UFMT
CP07AY-AMCP07UFMT-AMCP09UFMT-AMCPX09UA2MT-AMCP10UFMT-AM-FL
NP07UFMT-AMNP09DF-AMNP09FFNP09UFMT-AMNP09UFMTMD-BL09NPX09 UA2MT-AMNPX20 UA2MT-AMNP10UFMT-AM-FL
Stan
dar
d T
PUPr
emiu
m T
PU
C07 CFC07 JFC12 CFC12 DFC13 FFC16 FFC17 CFC20 CFC20 CKC21 CKC22 CFC30 CFC30 CK
Clin
a (P
VC
)A
ster
1122221222233
RigidRigidRigidRigidRigidRigid
SemirigidRigid
Extra rigidFlexibleRigidRigid
Extra rigid
1,002,902,102,302,002,552,752,804,102,604,003,705,20
1,102,052,502,502,302,203,103,304,853,104,804,406,20
1060353540405555757580
110130
25805555404075759075100140150
6085120120120160150200140200200300210
581010951715920172216
710151512825221528253025
300020003000200030002200
2-3000300020002000300030002000
-5 (-15) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)
222223
RigidRigidRigid
FlexibleFlexibleFlexible
5,505,005,50
18,6018,6019,70
4,204,804,808,007,609,30
4580
100190150230
70130160210200280
120200200200200300
81414181828
122020282840
200020002000800600800
A26 X1C: supplied in rolls of 100 m.
A36 X1C: also available in 400, 500 and 600 mm.
FL
FL
Antistatic
Antistatic top cover
Antistatic bottom cover
S Low noise fabric
FDA Food quality
EU Food quality Regulation EU 10/2011
EU* Food quality Regulation 1935/2004
Low friction coefficient
Resistant to mineral oils and fats
Resistant to vegetable oils and animal fats
Resistant to vegetable oils and fats, and partially resistant to animal oils and fats
Partially resistant to vegetable and animal oils and fats
Abrasion resistant
Cut resistant
ATEX certified
Pyrolisis test
Flame retardant
SW Solid Woven
AM Anti-microbial
Anti-Hydrolysis
FL Frayless
MDX Metal & X-Ray Detectable
Food conveyor belts
V = PVC between plies.
F12 CF BLF12 CF WHF14 CF BLF14 CF WHF18 CF BLF21 CCF31 CCF32 CCF41 CCF61 CCF91 CC
N09 CFN12 G2FN13 SFN19 CFN19 CKN20 CKN30 CY
Feb
or
No
vak
(PV
C)
V12 PFV18 PFV18 PPV18 T1FV20 PFV30 PFV08 SFV12 SCFV
V12 SUF
Ver
na
E20 CCE30 CCE40 CCE81 CCE90 CC
Esp
ot
PVCPVCPVCPVCPVCPVCPVCPVCPVCPVCPVC
8585858585757575757575
Blue 06White
Blue 06White
Blue 06WhiteWhiteWhiteWhiteWhiteWhite
0,500,501,001,001,002,002,002,752,002,303,00
SmoothSmoothSmoothSmoothSmoothSmoothSmoothSmoothSmoothSmoothSmooth
PVCPVCPVCPVCPVCPVC
757575757575
NaturalNaturalNaturalNaturalNaturalWhiteWhiteWhiteWhiteWhiteWhite
1,001,001,501,001,001,00
FabricFabricFabricFabricFabric
SmoothSmoothSmoothSmoothSmoothSmooth
FDAFDAFDAFDAFDAFDAFDAFDAFDAFDAFDA
EUEUEUEUEUEUEUEUEUEUEU
PVCPVC
SiliconePVCPVCPVCPVC
7065
70707070
Blue 06Blue 06Blue 01Blue 06Blue 06Blue 06Blue 06
0,504,000,100,801,001,501,00
SmoothPattern G2Impregn.SmoothSmoothSmoothSmooth
PUPVCPVCPVC
909070
NaturalNaturalNaturalBlue 10Blue 06Blue 06Blue 06
0,100,700,700,50
WPFabricWP
W impregn.Pattern KPattern KPattern Y
FDAFDAFDAFDAFDAFDAFDA
EUEU*EUEU*EUEUEU
PVCPVCPVCPVCPVC
7373737373
WhiteWhiteWhiteWhiteWhite
1,002,002,001,002,00
SmoothSmoothSmoothSmoothSmooth
PVCPVCPVCPVCPVC
7373737373
WhiteWhiteWhiteWhiteWhite
1,001,001,001,001,00
SmoothSmoothSmoothSmoothSmooth
FDAFDAFDAFDAFDA
EUEUEUEUEU
Polyolef.Polyolef.Polyolef.Polyolef.Polyolef.Polyolef.SiliconeSiliconeSilicone
919191919191404040
Transp.Transp.Transp.Transp.Transp.Transp.WhiteTransp.Transp.
0,500,500,502,100,500,500,300,300,30
MatMat
SmoothPattern T1
MatMat
SmoothSmoothSmooth
Polyolef.Polyolef.Polyolef.Polyolef.Polyolef.
PU
91
NaturalNaturalTransp.NaturalNaturalNaturalNaturalNaturalNatural
0,100,200,100,100,100,10
FabricImpregn.SmoothImpregn.Impregn.Impregn.Impregn.
FabricFabric
FDAFDAFDAFDAFDAFDAFDAFDAFDA
EUEUEUEUEUEUEU*EU*EU*
More ususal Patterns
Type A Type C3 Type D Type G2
Skirt
Type
V15 PLF07CC-GR-EUNF 104UNSS75UNRS85EF603-BL06***
Polyolefin
PVC
PVC
PU
PU
Polyester
Material
1850
2000
100
75
87
60
Manufactu-ring width
mm2,10
1,30
4,00
2,10
3,30
3,00
Thicknessmm
91
85
70
85
85
40**
HardnessºShA
1,10
1,60
0,50*
0.20*
0,365*
2,00
WeightKg/m2
Transparent
Green 00
White, Green 00, Blue 06
White, Green 09, Blue 06
White, Green 09, Blue 06
Blue 06
Available colors
*** Special - Supplied in full roll ** ºShD * Weight in Kg/m
Type A2
FDA, EU, Pyrolisis
FDA, EU, Antistatic
FDA, EU, Antistatic, Oil resist.
FDA, EU, Oil resist.
FDA, EU, Oil resist.
FDA, EU, Oil resist.
Special characteristics
P18 EF
P18 T1FPole
r
Polyester
Polyester
93
93
Natural
Natural
0,35
2,10
Mat
Pattern T1
Natural
Natural
Fabric
Fabric
FDA
FDA
EU
EU
Specialcharacteristics
Belt type
Material HardnessºShA
Color Thicknessmm
Finish
Top cover
Material HardnessºShA
Color Thicknessmm
Finish
Bottom cover
at 20ºCA B
mm mm
F12 CF BLF12 CF WHF14 CF BLF14 CF WHF18 CF BLF21 CCF31 CCF32 CCF41 CCF61 CCF91 CC
N09 CFN12 G2FN13 SFN19 CFN19 CKN20 CKN30 CY
V12 PFV18 PFV18 PPV18 T1FV20 PFV30 PFV08 SFV12 SCFV
V12 SUF
E20 CCE30 CCE40 CCE81 CCE90 CC
Feb
or
No
vak
(PV
C)
Ver
na
Esp
ot
-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)-5 (-15) +80 (100)
-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)
22222233433
RigidRigidRigidRigidRigid
FlexibleFlexibleFlexibleFlexibleFlexibleFlexible
2,002,002,502,503,505,006,107,407,407,709,60
2,402,402,902,904,306,107,609,409,209,40
11,90
3535404080
140200300300350400
55556060
100190250350350400500
120120120120180200300300400700900
1010101012203030355575
15151515182840405090130
30003000300030003000200020002000200020002000
-15 (-25) +80 (100)-5 (-15) +80 (100)
-15 (-25) +80 (110)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)
2222223
RigidRigidRigidRigid
FlexibleExtra rigidExtra rigid
2,105,501,802,803,104,104,30
2,504,202,003,303,604,855,00
354530557575
140
557030757590
140
120120120200200140210
109101520916
15131522281525
30002000
2-30003000200020002000
-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)-15 (-25) +80 (100)
23433
FlexibleFlexibleFlexibleFlexibleFlexible
4,106,207,407,809,00
5,007,709,209,60
11,20
140200300400400
140250350400500
200300400800900
2030356575
28405095130
20002000200020002000
-15 (-25) + 45 (65)-15 (-25) + 45 (65)-15 (-25) + 45 (65)-15 (-25) + 45 (65)-15 (-25) + 45 (65)-15 (-25) + 45 (65)
-25 (-35) + 150 (170)-15 (-25) + 80 (110)-15 (-25) + 90 (110)
222223122
RigidFlexibleFlexibleFlexibleRigidRigid
Extra rigidRigidRigid
2,102,502,704,602,503,601,001,751,40
1,952,402,802,902,403,401,002,001,50
5060809560
1508
3530
708080
14080
200205550
11020020020020030050120120
10121412131841010
15202018223261515
20002-300020002000
2-30002-300020002000
2-3000
Type X Type X1 Type Y1 Type Z
Type K1 Type K Type LType H
Type Q Type T Type T1 Type W3
Pole
r
-20 (-30) + 100 (120)
-20 (-30) + 100 (120)
2
2
Flexible
Flexible
2,40
4,50
2,50
3,10
40
120
100
140
200
200
12
12
20
20
2000
2000
P18 EF
P18 T1F
Belt typeConstant
(intermittent)temperature
ºCWeftNº of
plies
FabricsBelt
thickness
mm
Beltweight
kg/m2
Breakingload
N/mm
Working load at
1%elongation
N/mm
Working load at1.5%
elongationN/mm
Max.roll
width
mm
Antistatic
Antistatic top cover
Antistatic bottom cover
S Low noise fabric
FDA Food quality
EU Food quality Regulation EU 10/2011
EU* Food quality Regulation 1935/2004
Low friction coefficient
Resistant to mineral oils and fats
Resistant to vegetable oils and animal fats
Resistant to vegetable oils and fats, and partially resistant to animal oils and fats
Partially resistant to vegetable and animal oils and fats
Abrasion resistant
Cut resistant
ATEX certified
Pyrolisis test
Flame retardant
SW Solid Woven
AM Anti-microbial
Anti-Hydrolysis
FL Frayless
MDX Metal & X-Ray Detectable
esbelt series
Aster seriesFood. White, FDA food-quality. Industry. Green and black. Belts with an embossed cover for lifting or lowering packaged or bulk products.
Breda seriesIndustry. High resistance to abrasion, chemical products and mineral oils. Excellent performance under difficult working conditions.
Clina seriesFood. Excelllent resistance to vegetable oils and animal fats.Non-toxic. PVC and PU.
Drago seriesIndustry. Resistant to cuts, abrasion and mineral oils. For roller, troughed conveyors and bucket elevators.Conveyance of clay, chemical fertilizers and grain materials.
Espot seriesFood. Excellent resistance to vegetable oils and fats. For roller troughed conveyors and bucket elevators. Conveyance of organic materials: food, seeds, compound fodders, waste.
Febor seriesIndustry. Green – Packaged or grain products free of oils or fats. Black – Flame retardant belts, airports, logistics centres. Food. White and blue - FDA food-qua-lity, flame-retardant, resist. to abrasion. Sugar, carrots and other vegetables.
Hipro seriesIndustry. Excellent resistance to abrasion, better than some elastomers, highly antistatic, fusion splice. Conveyance and processing of cardboard, paper and other abrasive materials.
Keram seriesIndustry. Highly resistant to cuts and mineral oils. Auto-mobile industry (cutting and stamping of metal).
Novak seriesFood. PVC and PU blue belts. Excellent resistance to vegetable oils and animal fats.
Tubul Series - truly endless sleeves 100% wool felt endless belts (no splice or seam). Baking and confectionery.
...and also
Verna seriesTobacco and Food. Polyolefin belts compliant with Pyrolisis test. Silicone belts for conveying very sticky products.
TUBUL Type
Material Weightg/m2
Thickness*mm
Application
T35
T6
100%wool
1.700
2.700
3,5
6
Food industry: croissant forming ma-chines, automatic oven feeders, bread forming machines headstocks.Textile industry: larding of cotton.
Food industry: french bread forming machines.Textile industry: polisher of filaments in FIPEL machine.
Minim. mm
20
50
(*)Tolerance of +/- 10%
Poler seriesTobacco. Polyester belts compliant with Pyrolisis test. They work extremely well at high temperatures.
Washflow seriesFood. High resistance plastic mesh belts. A new concept in belts for the washing and conveyance of vegetables, fruit and frozen food, as well as for draining liquids and screening solid waste.
Premium TPU seriesFood. Bacteriostatic formulation with strong and long lasting antimicrobial & antibiofilms effects (ISO 22196). Highly resistant to hydrolisis. Fabrics with low capillarity (Wicking Test G11-FDA 2011).
Standard TPU seriesFood. Highly resistant to animal and vegetable oils and fats, no cracks, high level of hygiene. High resistance to cut and abra-sion. Fabrics with low capillarity (Wicking Test G11-FDA 2011).
Some esbelt specialties
...other specialtiesEsbelt offers many other belt specialties such as: splices with hidden fasteners; continuous waves on the belt surface to pro-tect and convey delicate fruit, longitudinally cut profiles, very popular in the fruit and vegetable sector, etc.
Perforated beltsSupply of perforated belts for bucket elevator belts as well as vacuum belts, draining belts, etc. Possibility of punching holes of different diameters and arrangements.
Food RegulationsThese are very complicated regulations and are constantly evol-ving. To comply with them, we must follow strictly, what is es-tablished by FDA and/or the EU Regulations EC1935/2004 and EU10/2011 as well as their subsequent extensions, this requires much specialization. In particular, the Declaration of Compliance should include infor-mation about the global and specific migrations as well as the simulants used with respect to the normative or regulation com-pliance. The credibility of the manufacturer who issues the Cer-tificates is vital, e.g. in esbelt, we always test our belts against the most aggressive simulant which best replicates the harshest possible condition during the use of our belts.
ATEXEuropean regulations applied for preventive purposes to equi-pment components, such as conveyor belts, used in potential explosive atmospheres: conveyance of powdered grain products or storage in silos, especially if bucket elevators are used. Esbelt belts in the Espot, Drago and Febor sugar series are ATEX certi-fied (Category 2 defined by Directive 2014/34/EU on non-electri-cal components).
Anti-microbial AM beltsReduce microbial growth by over 99% (tested according to ISO 22196 norm). They solve or minimize the prevalent problem of the belts adding microbial load to the conveyed food product in between successive belt sanitization. The effectiveness of this anti-microbial property lasts for the entire belt life as it is based on an innovative formulation which is stable and non-hydrosolu-ble (unlike silver ions).
Main normatives
Sealed belt edges (molded edges)In esbelt, we can seal the edges of PU belts from 1-ply 0.8mm thick with smooth, mat or embossed top and bottom cover. Sea-led edges prevent oils and moistures from penetrating the fabric layer of the conveyor belts from the borders, thus avoiding mi-crobial growth and ply separation. They also prevent fabric fiber from sticking out from the belt edges and contaminating the conveyed products.Our technique of sealing thin PU belts ensures that the belt edges are protected while maintaining its flexibility to work on knife edge applications
Grape harvesting machine beltsOur many years of experience and number of metres manufactu-red make esbelt a leading company in this market.Well tested and widely recognised, our belts offer robustness and high transversal rigidity, working fully flat and centred. They last twice the average and can be repaired allowing a belt life up to two seasons. High frequency thermowelded profiles with exce-llent resistance to impact and tear.
Low capillarity (Wick Resistant)Waterproof fabrics that pass Wicking Test G11-FDA 2011 (wick resistant). They prevent the penetration of water, oils and pa-thogenic microorganisms through capillarity, avoiding ply-sepa-ration of the belt and enhancing hygiene in food applications.
Cleats (flights)for conveyorbelting
Inclined conveyors occasionally require belts with profiles or cleats (flights) on the carrying surface.These prevent slippage of the conveyed material and increases the belt capacity.
The type and height of the most suitable cleat (flight) is determined according to the characteristics of the conveyed material and the inclination of the conveyor. Optimum conveying capacity can be achieved up to angles of 70º by this means.
Notched PVC and PU trapezoidal tracking guides can be supplied; this increases belt flexibility and when fitted to the underside of the belt can reduce the minimum pulley diameter by 10%.
esbelt cleats (flights) are oil and fat resistant.
Arrangement ofcleats in open “V” pattern(herringbone)
Recommendationsfor profileattachment
A B
C F D E
C
G
A
B
C
D
E
F
G
Dimensions mm
400
300
50
180
20
18
250
500
400
50
205
20
18
300
600
450
75
210
20
24
325
650
480
85
225
20
30
350
800
600
100
286
20
50
450
1000
800
100
348
20
60
550
1200
900
150
390
20
60
600
Profile attachment is best carried out on 2 or more ply belts.
Minimum covers thickness for profile type are given below.
To obtain good results with a tracking gui-de, the grooves in the pulleys, rollers and slider beds must be larger than the tracking guide which is welded to the belt.
PVC
Material and type of profile Minimum cover thickness
0,3 mm
0,5 mm
0,8 mm
0,8 mm
1 mm
0,3 mm
0,5 mm
short fingers
height 20 and 30 mm
reinforced profiles
height 40, 50, 60 mm and types NE.012 and NE.C14
height 70, 80 mm and typesNE.K16, NE.015 and fingers
all types
all types
PUTPE
PO
2 mm 2 mm
2 mm
(2) The minimum recom-mended diameters given are for normal working conditions, at 20ºC. Lower temperatures require grea-ter diameters.
(3) Profile positioning: T - Transversal G - Inner tracking guide L - Lateral retaining wall,V - V-shaped
Cleats (flights)
NE.008-62NE.012-62PE.008PE.012
8128
12
812
812
75175
56133
PVC
PO
NE.015-62 20 15 PVC 330
NA.X04-62
UA.X04
6
6
4
4
PVC 23
24
4,0
4,0
28322832
100
100
6080
110120 T - G - L - V
T - V
NE.Y05-62NE.Z06-62NE.A08-62NE.B11-62NE.C14-62NE.K16-70UE.Y05UE.Z06UE.A08UE.B11UE.Y05-MD-BL09UE.Z06-MD-BL09UE.A08-MD-BL09PE.Z06PE.A08PE.B11
h
b
a
DA.X04-62DE.Y05-62DE.Z06-70DE.A08-62DE.B11-62DE.C14-62DE.K16-70
UV.020UV.030UV.040UV.050PV.020PV.030PV.050EV.020EV.030EV.050UL.030UL.040UL.050PL.030PL.050EL.030EL.050
NEM.040-62NEM.060-62
NEQ.040-62NEQ.060-62NEQ.070-62
b
b
h
200 250
25
25
30
30
G - L
G - L
G - L8
10131722308
1013178
1013101317
568
111416
568
1156868
11
4,45,67,29,0
11,818,4
4,45,67,29,04,45,67,25,67,29,0
PVC
PU
PO
TPE
4060
100180300470
405998
1704059984675
130
28303337425028303337283033303337
507090
100150250
507090
100507090
100110120
507090
100150250
507090
100507090
6080
100120180250
6080
100120
6080
100
T - G - L - V
T - G - L - V
T - V
T - G - L - V
68
1013172230
3,54,55,57,5
10,513,515,5
2030405060
4,76,07,5
10,312,218,4
PVC
PVC
PU
18304575
140245370
1535507080
125170
285370450600700
PVC
PVC
45
120120120120150
10101010101010101010
20304050203050203050
PU
PO
TPE
140180230300
95135235130170300
30
30
30
40455050
100
80
10101010101010
30405030503050
PU
PO
TPE
215255320155225210310
40
40
40
100
80
455050
4555
426060
4060
406070
softPVC
softPVC
6401050
63511501400
120150
120150170
G - L
G - L
G - L
T
T
T
T
T
T
T
T
T
T
4,25
b
h
h
b
h
b
h
b
h
b
h
b
Unwelded profile angle:
Once welded, the variation in the angle is minimal.
α= 65º ± 3º
α
NL.030-70NL.040-70NL.050-70NL.060-70NL.070-70NL.080-70
252525254040
304050607080
430550700780
12401400
50505050
130130
120120120150170180
NV.020-70NV.030-70NV.040-70NV.050-70NV.060-70
2525252525
DUE.Y05DUE.Z06DUE.A08DUE.B11
8101317
4,55,57,5
10,5
4,76,07,59,0
354574
130
35507080
DUA.X04 6 3,5 4,25 19 15PU
PU
EE.Z06EE.A08EE.B11
101317
68
11
5,67,29,0
5695
167
303337
8090
100
80100120
LongitudinalSection Dimensions Material(1)
Type
bmm
hmm
amm
Weightg/m
Transverse Possiblepositioning
(3)minimumpitchmm
minimumø (2)mm
minimum ø mm (2)
bottom side
top side
G - L
Other profilesFingers and Short FingersAs an alternative of cleats, esbelt provides “Finger” profiles. Specially indicated for conveying fruit on inclined sections (preventing sharp knocks that might damage the appereance) and frozen food products (the cylindrical structure prevents the frozen pro-duct from sticking to the belt).
Esbelt offers “Short Fingers” used mainly in harvesters of thin-skinned (apples, necta-rines, peaches, pears, etc.) and the conveyance and selection of asparagus.
Reinforced profile
Profile
Fingers
Short fingers
Heightmm
HardnessºShA
ø minimummmColor
92
25
80
67
100
60White - Green - Blue 06
Esbelt offers reinforced PVC profiles in 4 different heights, specially designed for applications involving difficult conditions; in general all applications in which the profiles undergo impact on receiving or conveying material. Excellent resistance to ripping and cutting. Strong and long-lasting that increase transverse rigidity of the belt, producing greater stability on the conveyor.
Belt support on the return side
1. Belt with cleats (flights) in “V”, sectionsupported on a cylindrical roller.
3. Supported on three pulleys.5. Belt with sidewalls supported by acylindrical roller which is narrower
than the belt.
2. Supported on two lateral pulleys. 4. Belt with internal tracking guidesupported by a cylindrical roller anddriven by a grooved driving pulley.
6. Belt with sidewalls and transversecleat supported by a cylindrical roller.
Min. pitch100 mm
Fingers
Min. pitch 51 mm
51 mm
Shortfingers
PVC
softPVC
PU
PO
TPE
PVC
PVC
Polyurethane
Polyolefin
Polyester
Green 00 - White - Blue 06
Green 00 - White - Blue 06
Green 09 - White - Blue 06
Transparent
Natural
FDA, EU, antistatic, oil resistant.
FDA, EU, antistatic, oil resistant.
FDA, EU, oil resistant.
FDA, EU, oil resistant.
FDA, EU, oil resistant.
70º ShA
62º ShA
85º ShA
90º ShA
40º ShD
-10 +80
-15 +80
-10 +100
-10 +50
-20 +105
(1) Material Color Special characteristics Hardness Temperature ºC
PU-MD Polyurethane MD Blue 09FDA, EU, oil resistant Metal detectable, Anti-hydrolysis. 85º ShA -20 +100
PVC PVC Black Antstatic, oil resistant. 70º ShA -10 +80
Profiles
h
b
Profile
NRR030
NRR050
NRR070
NRR100
NIR070
NIR100
URR040
Dimensions Transverse ColorLength mm
50
25
70
70
Blue 06, White and
Green 00
2000
1000
bmm
hmm
Minimumpitchmm
minimumø (2)mm
30
50
70
100
68
97
40
120
80
Material
PVC
PUAzul 06
Runer
FRRS35
FRRS40
FRRS45
FRRS50
FRRS55
FRRS60
FRRS65
FRRS70
FRRS75
FRRS80
FRRS85
FRRS90
FRRS95
FRRS100
35
40
45
50
55
60
65
70
75
80
85
90
95
100
48
48
48
48
48
48
48
48
48
48
48
48
48
48
55
55
55
55
55
55
55
55
55
55
55
55
55
55
80
100
100
120
120
140
140
160
160
180
180
200
220
220
5
5
5
5
5
5
5
5
5
5
5
5
5
5
PVC “Runer”-without base-Profile welded directly onto belt.
FRRS Type
- With internal polyester reinforcement: Resistant to the drum pressure at the inflections and on the return side.
- Recommended for particulary long and wide conveyors or for conveyors with inflections.
FSSS35
FSSS40
FSSS45
FSSS50
FSSS55
FSSS60
FSSS65
35
40
45
50
55
60
65
30
30
30
30
30
30
30
30
30
30
30
30
30
30
80
90
90
100
100
110
120
3,5
3,5
3,5
3,5
3,5
3,5
3,5
PVC
PVC
FSSS Type
- With internal polyester reinforcement.
- Recommended for straight or lighter conveyors.
FNSS35
FNSS45
35
45
35
35
30
30
40
50
4
4
PVC
FNSS Type
- No internal reinforcement: Developed for use in conveyors with extre-mely small pulley diameters.
- Recommended for small straight conveyors (no inflections).
FRRS and FSSS types: White color - Hardness 70ºShA Green color - Hardness 78ºShA
70
70
The minimum distance between 2 Runer should be: -100 mm with PVC Runers - 30 mm with PU Runers
min. 3 mm min. 4 mm*
Layout of transverse cleat and “Runer” PVC without base.
*When a cleat is type NL.070 or NL 080, the minimum distance of 4 mm will be increased to 5 mm.
The distance between the transverse cleats should be a multiple of the - cF - pitch, if it is to coincide with the undulation of the “Runer”.
The maximum width for belts with Runer is: - 2,400 mm with PVC Runer. - 900 mm with PU Runer.
The minimum length for endless belts with the Runer profile is: - 2,500 mm with PVC Runer. - 3,510 mm with PU Runer.
hF
aF
min. 7 mm min. 4 mm
Layout of transverse cleat and “Runer” PU without base.The length of the transverse cleats should be a multiple of 25 mm.
hF
aF
cF
Standard PU -without base-
UNSS20
UNSS25
UNSS30
UNSS35
UNSS40
UNSS45
UNSS50
UNSS55
UNSS60
hF mmheight
20
25
30
35
40
45
50
55
60
28
28
28
28
28
28
28
28
28
30
30
30
30
30
30
30
30
30
35
40
45
50
60
65
75
80
90
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
aF mmwidth
cF mmpitch
Minimum diameter mm
Thicknessmm
PU HardnessºShA
85
85
85
85
85
85
85
85
85
UPNSS20
UPNSS25
UPNSS30
UPNSS35
UPNSS40
UPNSS45
UPNSS50
UPNSS55
UPNSS60
hF mmheight
20
25
30
35
40
45
50
55
60
28
28
28
28
28
28
28
28
28
30
30
30
30
30
30
30
30
30
35
40
45
50
60
65
75
80
90
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
aF mmwidth
cF mmpitch
Minimum diameter mm
Thicknessmm
PU HardnessºShA
85
85
85
85
85
85
85
85
85
Premium PU -without base-
hF mmheight
aF mmwidth
cF mmpitch
Minimum diameter mm
Thicknessmm
hF mmheight
aF mmwidth
cF mmpitch
Minimum diameter mm
Thicknessmm
hF mmheight
aF mmwidth
cF mmpitch
Minimum diameter mm
Thicknessmm
HardnessºShA
Profile welded directly onto the belt, without internal reinforcement.
In order to produce a good weld for the Runer, esbelt recommends certain minimum belt cover thicknesses, depending on the type and height of the Runer being attached.
The table gives the minimum cover thicknesses for the type of Runer
“Runer” -with base-
Recommendations for Runer attachment
Profile with base for welding by hand with the Leister.
PVC Runer - White/Blue: Non-toxic, FDA-EU, suitable for using with foodstuffs. - Green: Suitable for all uses that do not requiere food quality belts.
PU Standard Runer - White/Blue 06/Green 09: Non-toxic, FDA-EU, suitable for using with foodstuffs.
PU Premium Runer - White: Non-toxic, FDA-EU, suitable for using with foodstuffs. Anti-hydrolysis. - Blue 09 MD: Non-toxic, FDA-EU, suitable for using with foodstuffs. Metal detectable. Anti-hydrolysis.
cF
Outline of “Runer” with base.
Available colors
hF
aF
base
FSRC55WH 1º Type of material
FSRC55WH 2º Reinforcement
FSRC55WH 3º Pitch
FSRC55WH 4º Base
FSRC55WH 5º/6º Runer height (mm)
FSRC55WH 7º Color
F PVC / U PU
R Fabric with high transv. rigidity / S with stnd. transv. rigidity / N Not reinforcedPN Premium not reinforced
S 30 mm / R 55 mm
S With base / C With thin base (PVC=3,5 mm and PU=2,3 mm)M With thick base (PVC=5 mm and PU=3,3 mm)
From 35 mm to 100 mm.
BL06 Blue 06 / BL09 Blue 09 / GR Green / WH White
General outline of nomenclature. Explanation of codes:
FSRC35
FSRC55
FSRC85
hF mmheight
35
55
85
55
55
55
55
55
55
80
120
180
aF mmwidth
cF mmpitch
Minimum diameter mm
ThicknessmmPVC
3,5
3,5
3,5
Comments: Wave width = 45 mm / Thickness base = 3.5 mm
PVC “Runer” - with base
FSR
C T
ype
PU “Runer” - with base
UNSM35
UNSM55
35
55
44
48
30
30
70
100
2,1
2,1
Comments: Wave width = 28 mm / Thickness base = 3.3 mm
hF mmheight
aF mmwidth
cF mmpitch
Minimum diameter mm
ThicknessmmPU
UN
SM T
ype
PVC (FRR, FSS y FNS)
PVC (FRR, FSS)
PVC (FRR)
PU
With base PVC and PU (FSRC and UNSM)
Material and type of Runer Minimum cover thickness
≥0,50 mm
≥0,80 mm
≥1,50 mm
≥0,30 mm
≥0,80 mm
55 mm
from 60 mm to 75 mm
from 80 mm
all types
all types
Maximum Runer height
Neucan Buckets
100
120
140
160
180
200
230
250
300
315
Amm
106
126
145
169
184
202
237
258
305
320
49
63
80
98
104
117
75
78
100
110
91
111
111
123
137
147
157
159
178
190
0,22
0,32
0,58
0,79
1,10
1,16
1,58
2,04
2,98
3,30
55
75
110
152
201
250
290
360
485
625
B mm
CmmType
Buckets
Polyethylene material. White. FDA, Regulation EU 10/2011 and EC 1935/2004. Maximum service temperature 60ºC. For use with moderately abrasive powders and granular products, flours, tobacco, fruit, animal feeds, powdered phosphates and urea; foodstuffs in general, chemicals, moist and sticky materials, etc.
89
105
120
132
138
140
152
164
180
195
45
47
60
68
75
70
82
82
98
103
D mm
Emm
2
2
2
2
2
2
3
3
3
3
7
7
7
7
7
9
10
11
11
11
Polyethylene(Hardness 62° Shore D)
Vercan BucketsPolyamide(Hardness 72° Shore D)
Polyamide material. Antistatic. Regulation EU 10/2011 and EC 1935/2004. Maximum service temperature 110ºC. For use with small or medium size granular abrasive materials, rice, sugar, cereals, granulated feeds, cement, clay, active chemicals, detergents, fertilizers, salt, etc.
100
120
140
160
180
200
230
250
300
315
Amm
113
129
145
170
190
205
237
262
305
328
50
64
81
98
105
119
75
79
100
111
94
110
117
128
137
147
157
161
178
190
0,24
0,41
0,55
0,75
1,10
1,24
1,64
2,17
3,30
3,45
70
95
145
190
235
317
375
475
610
785
B mm
CmmType
97
106
120
132
140
142
152
165
180
195
47
51
60
69
75
74
85
87
98
108
D mm
Emm
2
2
2
2
2
2
3
3
3
3
7
7
7
7
7
9
10
11
11
11
gre
en
100
120
140
160
180
200
230
250
300
107
129
145
170
190
205
237
262
305
50
64
81
98
105
119
75
79
100
90
106
113
125
137
147
157
161
178
0,24
0,41
0,55
0,83
1,17
1,24
1,64
2,17
3,30
74
135
150
190
255
317
375
475
610
90
106
120
132
140
142
152
165
180
47
58
64
69
78
74
85
87
98
2
2
2
2
2
2
3
3
3
7
7
7
7
7
9
10
11
11
wh
ite
wh
ite
AB
D
C
E
M6 x 25
M8 x 30
M10 x 40
Amm
B mm
Cmm
Type
21
27
30
25
30
40
6
8
10A C
B
Galvanized steel bolt supplied with nut and concave washer.The bolt is fanged for better securing to the belt.
capacityl
weightg
nºholes
ø mmholes
capacityl
weightg
nºholes
ø mmholes
Toptrans. Transmission and process belts.
LF 10 LF 14LF 20LF 25LF 30LF 40LF 54LF 80LL 10 LL 14LL 20LL 25LL 30LL 40
Tran
smis
sio
nD
IRTY
AN
D D
UST
Y A
PPLI
CA
TIO
NS
Leat
her
EE 04EE 06FE 06FE 10FF 06FF 10NFF 20NFE 10/2FE 14/3FE 14/4EE 10/3EE 10/4EE 14/5EE 14/6FC 04FC 06FC 04HEE 10EE 14EE 20EE 25EE 30EE 33EF 06EF 10EF 14EF 20EF 25EF 30EF 40
Gra
ph
ic S
ecto
r
Elas
tom
er a
nd
Fab
ric
Tan
gen
tial
Tran
smis
sio
n
Sector Type Color Material Thickness mm
Top surface Drive surface Top surface Drive surface Top surface Drive surface
Color Material Thickness mm
Top surface Drive surface Top surface Drive surface Top surface Drive surface
Black 80Black 80Black 80Black 80Black 80Black 80Black 80Black 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80
Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80Grey 80
Nylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabric
LeatherLeatherLeatherLeatherLeatherLeather
LeatherLeatherLeatherLeatherLeatherLeatherLeatherLeatherLeatherLeatherLeatherLeatherLeatherLeather
0,300,300,300,300,300,300,300,302,002,002,002,002,002,00
2,002,002,002,002,002,002,202,202,002,002,002,002,002,00
Sector Type
Green 83Green 83Green 83Green 83Green 81Black 80Black 80Green 83Green 83Green 83Green 83Green 83Green 83Green 83
Natural 80Natural 80Ocher 80Green 83Green 83Green 83Green 83Green 83Green 83Black 80Black 80Black 80Black 80Black 80Black 80Black 80
Green 83Green 83Black 80Black 80Green 81Black 80Black 80Black 80Black 80Black 80Green 83Green 83Green 83Green 83Green 81Green 81Green 81Green 83Green 83Green 83Green 83Green 83Green 83Green 83Green 83Green 83Green 83Black 81Black 81Black 81
NBRNBRNBRNBR
Nylon fabricNylon fabricNylon fabric
NBRNBRNBRNBRNBRNBRNBR
Mixed fabricMixed fabricMixed fabric
XNBRXNBRXNBRXNBRXNBRXNBR
Nylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabric
0,600,600,500,600,300,300,301,202,102,701,201,702,102,700,300,300,300,700,700,700,700,700,700,350,300,300,300,300,300,30
0,600,600,350,300,300,300,300,300,300,301,201,702,102,700,300,300,350,700,700,700,700,700,700,500,700,700,700,700,700,70
NBRNBR
Nylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabricNylon fabric
NBRNBRNBRNBR
Nylon fabricNylon fabric
Rubberized fabricXNBRXNBRXNBRXNBRXNBRXNBRNBRNBRNBR
XNBRXNBRXNBRXNBR
NR: Natural rubber. NBR: Nitrile rubber. XNBR: Carboxilated nitrile rubber.
EE 04EE 06FE 06FE 10FF 06FF 10NFF 20NFE 10/2FE 14/3FE 14/4EE 10/3EE 10/4EE 14/5EE 14/6FC 04FC 06FC 04HEE 10EE 14EE 20EE 25EE 30EE 33EF 06EF 10EF 14EF 20EF 25EF 30EF 40
LF 10 LF 14LF 20LF 25LF 30LF 40LF 54LF 80LL 10 LL 14LL 20LL 25LL 30LL 40
Type
Transmissions in two pulley drive sys-tems in dirty and dusty environments
Multi pulley drive transmissionin dirty and dusty environments.
ApplicationsMinimumpulley ø
mm
Elongationat break
%
Tensile strength
N/mm
Shaft loadat 1%
elongation N/mm
Thickness
mm
Totalweight
Kg/m2
Type ApplicationsMinimumpulley ø
mm
Elongationat break
%
Tensile strength
N/mm
Shaft loadat 1%
elongation N/mm
Thickness
mm
Totalweight
Kg/m2
Light transmissions, controller belts in cross cutters and feeders.
406090
120200280380560
406090
120200280
2222222222222222222222222222
225315450560625900
12151800225315450560675900
1014202530405480101420253040
2,803,003,303,553,804,305,257,004,504,805,005,255,506,00
2,602,803,103,053,754,205,506,904,104,404,604,255,005,50
2025202020257035404030305050152015356070
100120140
2530507090
130280
222222222222222222222222222222222222222222222222222222222222
9013513513513522545022531531522522531531590
13570
225315450560675740135225315450560675900
46666
102010141410101414463
1014202530336
101420253040
1,401,551,251,250,951,101,602,003,153,702,903,904,956,100,800,950,651,902,102,402,652,903,151,251,501,702,002,252,503,00
1,691,901,301,300,800,951,502,203,554,303,204,705,907,400,650,800,552,252,502,853,103,403,701,301,601,852,202,502,653,30
General use in paper folding, transfe-rring, offset and rotary printing.
Feeder belts in offset printing and PE bag machines.
Process belts in applications where very high abrasion occurs in the carrying surface.
Box folding belts in folder-gluer machines.
Spindle tapes in textile industry.
Tangential belts in textile industry.Transmission in multi pulley drives.
Two pulley drive transmission.
Manufacturing width: 500 mm
Main characteristics: Easy and fast splicing. Resistance to abrasion. Resistance to oils and fats. Resistance to a wide range of chemical products. High tensile strength. Vibration absorption. Low noise functioning. Easy to clean. Easy to store due to special packaging. Friction coefficient: Smooth finish: 0,4 to 0,8 (depending on hardness). Rough finish: 0,3. Maximum recommended speed: 15 m/s. Recommended operating temperatures: -20ºC to +50ºC (permanent) / -40ºC to +80ºC (momentaneous). Assembly: Belt connection by thermoplastic fusion. To calculate the final length of the belt, pretension will have to be considered. Pretension: Non-reinforced belts: maximum 8% (depending on hardness). Aramid and Polyester reinforced belts: <1%
PU Round & Vee belts
RS88L03RS88L04RS88L05RS88L06RS88L07RS88L08RS88L10RS88L12RS88L15
RS88R03RS88R04RS88R05RS88R06RS88R07RS88R08RS88R10RS88R12RS88R15
Hardness 88º ShA Smooth Green 14
345678
1012155345678
101215
100100100100100100
505050
100100100100100100
505050
9152434466094
135212
9152434466094
135212
Section
Rough
d
Roll lengthm
Diameter (d)mm
Weightg/m
Min. pulleydiameter mm
254050606080
100120150
254050606080
100120150
Round belts
Hardness 80ºShARough Blue FDA
Roll lengthm
Diameter (d)mm
Weightg/m
Min. pulleydiameter mm
RS80R04RS80R05RS80R06RS80R08RS80R10RS80R12RS80R15
4568
101215
100100100100505050
1524346085
123200
303540557585
120
RF92L08RF92LW6RF92LW8RF92L15RF92L18
Hardness 92ºShASmooth Yellow 00
6085
145212305
85100130155185
Section
Hardness 88º ShA Smooth Green 14
RF88R08RF88R10RF88R12RF88R15
6094
135212
80100120150
89.5
12.51518
8101215
Round belts with POLYESTER reinforcement
10050505050
100505050d
Hardness 80ºShARough Blue FDA
RF80R08RF80R10RF80R12RF80R15
6085
123200
557585
120
8101215
100505050
RSE55LW6
RSE55LW8
Hardness 55ºShDSmooth Natural 00
100100
85
150
190
250
Section
9.5
12.5
POLYESTERRound belts
d
Roll lengthm
Diameter (d)mm
Weightg/m
Min. pulleydiameter mm
Roll lengthm
Diameter (d)mm
Weightg/m
Min. pulleydiameter mm
Roll lengthm
Diameter (d)mm
Weightg/m
Min. pulleydiameter mm
Roll lengthm
Diameter (d)mm
Weightg/m
Min. pulleydiameter mm
PS88L0APS88L0BPS88L0C
Hardness 88ºShAGreen 14
505050
150255410
130180230
Section
Hardness 92ºShAYellow 00
PS92L0BPS92L0C
5050
255410
265340
Dimensions
131722
1722
Roll lengthm
Ridge topbelts
81115
1115
b
ch
PF88L0APF88L0BPF88L0C
Hardness 88ºShAGreen 14
81115
505050
145245390
130180230
Section
131722
Ridge top belts with POLYESTERreinforcement
b
ch
DF88L0B
DF88L0C
Hardness 88ºShAGreen 14
10
15
50
50
300
440
210
265
Section
17
22
Pentagonal beltswith POLYESTERreinforcement
b
ch
TS88L0ZTS88L0ATS88L0BTS88L0C
Hardness 88ºShAGreen 14
6098
173286
7090
115160
Section
Hardness 92ºShAYellow 00
TS92L0ZTS92L0ATS92L0BTS92L0C
50505050
6098
173286
80100130180
10131722
10131722
b
h
Trapezoidal Vee belts
Hardness 80ºShABlue FDA
TS80L0Z 50 53 5010 6
TF88L0ATF88L0BTF88L0C
Hardness 88ºShAGreen 14
505050
98170276
90115160
Section
131722
b
h
Trapezoidal Vee beltswith POLYESTER reinforcement
TrapezoidalVee belts withPVC roughtop cover TS88G0Z
TS88G0ATS88G0BTS88G0C
Hardness 88ºShAGreen 14
10121518
50505050
95132218346
80100120180
Section
10131722
b
h
TrapezoidalVee belts withPVC smooth top cover TS88C0Z
TS88C0ATS88C0BTS88C0C
Hardness 88ºShAGreen 14
Section
b
h
TF88G0A
TF88G0B
TF88G0C
Hardness 88ºShAGreen 14
12
15
18
50
50
50
132
215
336
100
120
180
Section
13
17
22
Trapezoidal V-belts with PVC rough top cover & POLYESTERreinforcement
b
h
79
10
910
bmm
hmm
cmm
Weightg/m
Min. pulleydiameter mm
Dimensions Roll lengthmb
mmh
mmc
mm
Weightg/m
Min. pulleydiameter mm
79
10
Dimensions Roll lengthmb
mmh
mmc
mm
Weightg/m
Min. pulleydiameter mm
10
10
Roll lengthm
Weightg/m
Min. pulleydiameter mm
Dimensionsb
mmh
mm50505050
68
1114
68
1114
Roll lengthm
Weightg/m
Min. pulleydiameter mm
Dimensionsb
mmh
mm
81114
Roll lengthm
Weightg/m
Min. pulleydiameter mm
Dimensions
bmm
hmm
9111417
50505050
113154248385
80100120180
10131722
Roll lengthm
Weightg/m
Min. pulleydiameter mm
Dimensionsb
mmh
mm
Roll lengthm
Weightg/m
Min. pulleydiameter mm
Dimensionsb
mmh
mm
Machinery for HandlingConveyor Belts.Esbelt offers its clients all the necessary elements for handling and installing belts, as well as the accessories required to guarantee the best possible quality of finish and to increase productivity of distributors’ workshops.
Slitters designed for cutting belts lengthwise. Both the portable and automatic slitters are easy to handle and have a maximum working width of 2250mm.
Ply separator for highly accurate separation of the ends of PVC, TPU and PO 2 and 3-ply belts.
Semi-automatic hydraulically operated finger-cutting machine, designed for cutting fingers in the ends of belts for splicing. Working width 1,370 mm.
Welder for longitudinal profiles A pneumatically operated machine for hot-air welding on belts with a maximum width of 1,200 mm.
Air-cooled presses with integrated controls for vulcani-sing belts, offering a magnificent finish to the splices.
Tool-kit for splicing round and vee belts and different handling tools for improving workshop tasks.
Machinery for HandlingFlat Belts.500-mm circular slitter, which cut up to a thickness of 7 mm.
Skiving machine developed for bevelling the ends of belts to be spliced.
Portable presse for splicing belts - maximum width - 300 mm.
Esbelt Group companies:
Esbelt, S.A.Provença, 38508025 BarcelonaSpainTel. +34-93 207 33 [email protected]
Esbelt GmbHHabichtweg 241468 NeussGermanyTel. +49-2131 [email protected]
Esbelt Corporation1071 Cool Springs Industrial Dr.O’Fallon, MO 63366 USA Tel: +1-636 294 [email protected]
Esbelt SAS190 Av. du Roulage / ZA du Roulage32600 PujaudranFranceTel. +33-5 42 54 54 [email protected]
Esbelt ApSAgerhatten 16B - Indgang 2DK-5220 Odense SØDenmarkTel. +45 70 20 62 [email protected]
esbelt
Esbe
lt re
serv
es t
he r
ight
to
chan
ge t
he s
peci
ficat
ions
of
its p
rodu
cts
with
out
prio
r no
tice.
Jun
e 20
21
LPBE 600ACI
LCU 225 LCM 225EEN
LST 160 LTU 100V7
LSM 1200
LPBE 1200ACI LP 9000
LBCE 300
LPCE 300
LCCB 500