Conveying and Storing

8/4/2019 Conveying and Storing

1/28

W E C O N V E Y Q U A L I T Y

Conveying & Storingin the Cement

induStry


2/28

W E C O N V E Y

2

ContentS

4 AUMUND Group Equipment inthe Cement Industry

6 Clinker Transport

10 Conveying o raw meal,

cement and additives

12 Transport o raw material, clinker,

additives and cement

14 Hopper discharge and crushereeding

16 Proportional eeding, proportional

discharge

17 Silo and hopper discharge

19 Dust-tight transport

20 Material reception and transer

21 Clinker loading

22 Clinker storage & Clinker

discharge

24 Conversions & Reurbishments

25 Ater-Sales Service

26 Other AUMUND Group Equipment

in the Cement Industry

For the conveying and storage

technology AUMUND oers a

unique combination o:

Highesttechnicalstandard

System-solutionswithreliably

high grades o efciency and

proftability

Centralmanufacturewith

intra-plant quality assuring

systems

Sophisticatedassemblyand

start-up concepts under the

instructions o highly qualifed

supervisors

ConCePt And engineering

The guideline or the AUMUND concept is maximum customer beneft.

Adaptedtothecustomers

specifc requirements, all

transport processes are

constantly optimised on the

basis o innovations and the

latest technical know how.

Inordertocombineeconomical

and ecological aspects which

will also comply with uture

demands, economical and at

the same time ecologically

balanced solutions are

considered.

mAunuFACture & ASSemBLy

Company Headquarters in Rheinberg


3/28

Q U A L I T Y

3

t Aumund gp

Highsafetystandards

in all unctions and

under all conditions

with worldwide proven

technology, quality and

reliability.

Certicationaccording

to DIN ISO 9001

Patentsandnumerous

reerences in more

than 100 countries

Worldwide the products o the AUMUND

Group are being applied successully in

more than 10,000 plants.

The high standards AUMUND set

themselves in the felds o concept,

engineering, manuacture and assembly

are supported by a network o worldwide

ofces and representations.

The products are manuactured in own

acilities and locations o the Group.

Hong Kong

P.R. China

India

Dubai U.A.E.

RussiaSwitzerland

France

Germany

Great Britain

BrazilUSA


4/28

W E C O N V E Y

4

1

19 20 20 21 22 23 24

25

26

2 3 4 5 6

7

8

9

10

11

1. Limestone intake and transer to

stationary crusher (SAMSON

Feeder)

2. Storage and reclaim o shale/

clay (Portal Reclaimer)

3. Feeding pre-blending silos

(Bucket Elevator)

4. Distribution o limestone and

aggregates (En Masse Chain

Conveyor)

5. Discharge and reclaim o

limestone and aggregates

(CENTREX/Rotary Discharge

Machine)

6. Proportional eeding o raw mill

(Weigh Feeder)

7. Raw mill circulation (Bucket

Elevator)

8. Filter dust reclaim (En Masse

Chain Conveyor)

9. Raw meal silo eeding (Bucket

Elevator)

10. Reception and transer o

alternative uels (SAMSON

Feeder)

11. Raw meal eeding to pre-heater

(Bucket Elevator)

12. Clinker dust reclaim (En Masse

Chain Conveyor)

13. Clinker transport rom cooler to

storage (Pan Conveyor)

14. Automatic clinker discharge

(MOLEX)

15. Grab unloading (Eco-Hopper)

Aumund grouP equiPment in the Cement induStry


5/28

Q U A L I T Y

5

27 28 29 30 32

31

12

13

14 15

16

17 18

33 34 34

16. Truck loading o clinker

(Telescopic Spout)

17. Clinker intake and transer to

shiploader (SAMSON Feeder)

18. Clinker loading with Mobile

Shiploader

19. Link Conveyor with mobile ace

crusher

20. Limestone crusher reclaim

(Arched Plate Conveyor)

21. Limestone blending bed (Stacker/

Reclaimer)

22. Coal/petcoke unloading and

reclaim (Rotary Wagon Tipper)

23. Storage and reclaim o coal/

petcoke (Circular Stockyard)

24. Bucket elevator to coal mill

25. Proportional eeding o coal mill

(En Masse Chain Conveyor)

26. Coal dust reclaim (En Masse

Chain Conveyor)

27. Clinker storage in steel plate silo

28. Gypsum storage and reclaim

(CENTREX/Rotary Discharge

Machine)

29. Clinker transer to mill hoppers

(Pan Conveyor)

30. Discharge and reclaim o clinker

and additives (Silo Discharge

Gate/CENTREX/Rotary

Discharge Machine)

31. Distribution o clinker and

additives (Pivoting Pan Conveyor)

32. Cement mill eeding (Bucket

Elevator)

33. Filter dust reclaim (En Masse

Chain Conveyor)

34. Cement silo eeding (Bucket

Elevator)


6/28

W E C O N V E Y

6

CLinKer trAnSPort

deeP-drAWn PAn ConveyortyPe KZB

Deep-Drawn Pan Conveyors with transfer station

Pan Conveyor with Deep Drawn Pans Type KZB

Deep-Drawn Pan Conveyor - Detail

Inclinationupto30

When conveying hot,

abrasive cement clinker,

a trouble-ree operation

o the transport system is

decisive or the availability

o the whole system.

AUMUND Deep-Drawn Pan

Conveyors type KZB, stand

out or reliability and long

service lie.

KZB the economic

conveying system or the

transport o cement clinker

in 24-hours-operation

qualityassuredandcost-

effective,recognisedand

provenonallcontinents.

Conveyingheightsof

more than 130 m

Capacitiesexceeding

1,600 t/h Standardisedcomponents

Platewidthsfrom400to

2,400 mm

Stiffenedsideplates

Contactlessoverlapping

o the plates

Chainbreakingloadsofup

to 3,000 kN/chain strand


7/28

Q U A L I T Y

7

Silo feeding with steep-angle conveyor

Inclinationupto45

Standard Deep-Drawn Pan

Conveyors rom AUMUND

orm the basic components

o the steep-angled clinker

conveyors, which are applied

successully and economi-

cally or inclination angles

up to 45.

The standard chain

program allows

conveyingheights

ofupto120m so

that in case o a

corresponding plant

design clinker silos may

be ed with only one

conveyor.

Stabilisedbafes

Avoidingspillageby

baferecesses

Capacitiesto1,100t/h

PAn Conveyor With deePdrAWn PAnS And BAFFLeS

tyPe KZB-q

Pan Conveyor with baffles

KZB-Q inclined at 45 degrees


8/28


9/28

Q U A L I T Y

9

Pivoting PAn ConveyortyPe SPB

Feedingmultiplehoppersandsilos

Important AUMUND developments have

turned the Pivoting Pan Conveyor type SPB,

into an efcient instrument o automation

or the installation o economic transport

systems.

I more than two silos are to be ed, the

AUMUND Pivoting Pan Conveyor is the

best solution.

Automatedfeedingofclinkersilosand

mill hoppers

Remote-controlled

Severalintermediatedischarges

Systemlengthof400mandmorerealised

Simultaneousconveyingofdifferentbulk

materials in the upper and lower run

Lowmaintenancerequirement

Minimumenergyconsumption

Longservicelife

Feeding two silos in line

Mill hopper feeding


10/28

W E C O N V E Y

10

Conveying oF rAW meAL, Cement And AdditiveS

BuCKet eLevAtor WithSteeL-reinForCed BeLttyPe BWg Automaticparalleltensioning

AUMUND Belt Bucket Elevators

type BWG, with automatic paralleltensioning device are applied or the

conveying o cement, raw meal or

other dusty additives.

For pre-heater eeding, lits to 175 m

and conveying capacities o more

than 1,850 m/h have been achieved

with AUMUND belt bucket elevators.

Conveyingheightsto175m

Conveyingcapacitiesofmore

than 1,850 m/h

Continuousreceiptanddischargeo conveying material by means o

tight bucket sequence

Optimumdischargeconditions

Continuousoperationwith

low-maintenance requirement

Standardsafetyequipment:

level control, o-track monitoring,

speed monitor

As traction element textileorsteel

reinforcedbeltswith longitudinal

and crosswise stabilizing steel cords

are used depending on the load situ-

ation. AUMUND provides the belt

endswithspecialclampcon-

nections consisting o aluminium

profles with spring-loaded screwconnections. The rope ends o the

steel reinorced belt are cast addi-

tionally with an artifcial resin mass.

As a standard, the drive pulleys

are equipped with exchangeable

riction lining elements with diamond

pattern, thus enabling the exchange

o the segments without opening the

belt. A parallel toothed rack guided

tensioning device provides the

automatic belt tension and prevents

o-track running.

Silo and pre-heater feeding Drive pulley


11/28

Q U A L I T Y

11

Individualsystemsfordifferent

conveying materials

Conveyingmaterialtemperatures

up to max. 130C Hightensilestrengthbymeans

o steel cord abric

Creepingdriveformaintenance

purposes

Pre-heater feeding

Belt Bucket Elevators handling raw meal


12/28

W E C O N V E Y

12

trAnSPort oF rAW mAteriAL,CLinKer, AdditiveS And Cement

BuCKet eLevAtor With CentrAL ChAintyPe BWZ

Reducingvibrations

Preventingcrackformation

Longservicelife

High conveying capacities due to a

tight bucket sequence and buckets

up to 1,200 mm width are the char-

acteristic eatures o the AUMUND

Bucket Elevator type BWZ, with

orged central chain.

The bucket fxing which AUMUND

realises by means o angular brack-

ets with patented loose setting

between chain bolts and angular

brackets, reduces vibrations and thus

prevents crack ormation at bucket

walls and welding seams.

The chain with lubricated labyrinth

sealings contributes to long service

lives.

Conveyingcapacitiesofmore

than 900 m/h

Conveyingheightsto90m

Longservicelifeevenin

case o continuous operation

Forgedcentralchainwithlargely

dimensioned joint suraces

Heat-resistantincontinuous

operation, designed to with-

stand short material tempera-

ture peaks o up to 400C

Driveringandtensionchain

wheel in segments

Creepingdrivefor

maintenance purposes

Wideapplicationrange

Bucket Elevator for silo feeding Central Chain


13/28

Q U A L I T Y

13

douBLe BuCKet eLevAtortyPe BWZ-d

Conveyingcapacitiesofmorethan

1,800m/h

Capacitydependantconveying

heightsover60m

Highoperationalreliability

Robustdesign

Higher kiln capacities and new grindingprocesses in the cement industry require Bucket

Elevators with high conveying capacities and

center distances.

AUMUND Double Bucket Elevators type

BWZ-D, are the appropriate solution or the

actual requirement.

By means o the structural arrangement o two

central chains in one casing and the resulting

increase in capacity, the double confguration is

especially suitable as circulating Bucket Elevator

in grinding plants.

Head of Double Bucket Elevator with double drive and two bucket strands

Silo feeding


14/28

W E C O N V E Y

14

hoPPer diSChArge And CruSher Feeding

ArChed PLAte Conveyor

tyPe BPB And BPB-S/SF Functionalsolution

Simplescrapingoffofstickymaterials

For the transport o humid, sticky materials, such as

clay, gypsum, anhydrite, puzzolana and marl, Arched

Plate Conveyors type BPB, have become accepted as

unctional solution. The plates bent in arched shape

as their name says allow a simple scraping o o

sticky materials.

Heavy plate conveyors o type BPB-S or SF are

applied in quarries, when blast limestone and other

raw materials with up to 1,000 mm edge length are to

be ed to the crusher.

The conveyors are equipped with orged chains and

wear-resistant components. The plate elements, chain

sizes and roller designs are confgured according to

the related task and required conveying capacity.

Loading and unloading station

Hopper discharge type BPB

Workshop assembly type BPB-SF

Arched Plate Conveyor type BPB-SF


15/28

Q U A L I T Y

15

Armoured ChAin ConveyortyPe PKF

Severaloverallwidths

Adaptationtogivenhoppergeometries

The Armoured Chain Conveyor type PKF, is used as hopper

discharge equipment or crushed limestone or or sticky raw

materials, such as chalk, gypsum, clay or raw coal.

Dischargecapacitiesof10toover1,200t/h

Overallwidthsfrom600upto2,600mm

Tractionforcesupto680kN/chainstrand

Twotovestrandversionsdependingonthehopperwidth

Lowoverallheight

The Armoured Chain Conveyor conveys in the upper run so

that the conveyor trough orms the bottom o the hopper.

Several overall widths permit in each case the most avourable

adaptation to given hopper geometries, while the low overall

height also enables a subsequent installation into existing

conveyors.

Hopper discharge with Armoured Chain Conveyor

Armoured Chain Conveyor type PKF


16/28

W E C O N V E Y

16

ProPortionAL Feeding, ProPortionAL diSChArge

APron Weigh FeedertyPe dPB

Proportionalfeeding

Proportionaldischarge

The Apron Weigh Feeder is applicable or the propor-

tional eeding and the proportional dischargeo a wide variety o bulk materials.

For proportional reclaim o bulk materials with poor

owpropertiessuchasClay,Gypsum,Marl,Limestone,

Puzzolana etc. the Apron Weigh eeder eatures arched

plates especially designed or cohesive materials.

Proportional eeding o dusty, grained bulk materials

such as Clinker, Slag Sand and Petcoke is perormed

with the Apron Weigh Feeder eaturing deep-drawn pans.

This version o a pan-type weigh eeder is especiallysuitable or the proportional eeding o the cement mill

with clinker.

For mill eeding the Apron Weigh Feeder is also available

as completely enclosed and pressure-proo design.

Apron Weigh Feeder with arched plates Proportional feeding of additives

Mill feedingApron Weigh Feeder with deep drawn pans


17/28

Q U A L I T Y

17

SiLo And hoPPer diSChArge

CentreXtyPe CtX-Ad/Av/i

Trouble-freedischarge

Continuousmaterialow

Compactandrigiddesign

Trouble-ree discharge o sticky and cohesive materials

withpoorowproperties,suchasFGDornaturalgyp-

sum with high moisture content.

The logarithmically shaped discharge arm conveys the

bulk material radially rom the silo wall towards under-

neath the inner cone where it is discharged throughthe centrally located outlet. The discharge arm reaches

into the material rom underneath the material column,

undercutting the silo outside wall to prevent material

caking and dead zones. Thus, a continuous lowering o

the entire hopper content is achieved. Segregationand

bridgingareprevented.

On account o its compact and rigid design, the

CENTREX is an idealsolutionforinstallationinto

orunderneathexistingsilosorhoppers. Three basic

alternatives are available within the CENTREX system:

CENTREXwithexternaldriveandrotating

inner cone type CTX-AD

CENTREXwithexternaldriveandstationary

inner cone type CTX-AV

CENTREXwithinternaldrivetypeCTX-I

CENTREX for discharge of natural gypsum and trass

Internal drive CENTREX with internal drive


18/28

W E C O N V E Y

18

Reliabledischarge

Rotary Discharge Machines ensure the reliable dis-

charge o a wide variety o dierent additives or raw

materials such as:

Limestone,marlordolomitestone

NaturalandFGD-gypsum

Coal

The threedesign alternatives o the discharge machineallow its adaptation to completely dierent applications:

For the dischargefromlongitudinalhoppersoraline

ofsilos,theatandlowproledesignvariantisused,

while the rotating discharge machine is applied or the

dischargefromcylindricalsilos.

For the specifc control o the reclaim capacity and or

blending the additives when the machine is used in the

mill eeding section, the block design model can be

additionally equipped with a weigh eeder which comes

ully integrated into the mobile discharge machine. On

account o the homogenous, volumetric reclaim process,

the Weigh Feeder allows to reach an accuracy o +/- 1%.

rotAry diSChArgemAChinetyPe BeW

The rotating discharge machine guarantees a trouble-

ree reclaim o material rom concrete or steel silos o up

to 12 m diameter, oering an adjusting range o 1:10.

Firstin/Firstout

Simultaneousfeedinganddischarge

Proportionalreclaim

BEW-BL in block design BEW-FL in low profile design

BEW-K Rotating discharge machine


19/28

Q U A L I T Y

19

duSt-tight trAnSPort

en mASSe ChAin ConveyortyPe tKF

Especiallywear-resistantdesign

Ensuresauniformmaterialow

Controlledfeedingcapacities

For conveying, distributing, and reclaiming cement and flter dusts

as well as coal and additives such as gypsum, anhydrite, sand or

limestone.

In especially wear-resistant design the Chain Conveyor is also usedto convey cement clinker.

Enclosedconveyingpath,reduceddedustingeffort

Intermediatedischargethroughelectro-mechanicallydrivengates

Wear-resistantchainsforalongservicelife

Conveyingcapacityupto500t/h

Lengthupto50m

Shock-pressureproofdesignasanoption

For coal mill eeding applications, all Chain Conveyors come in a

design which is shock-pressure proo up to 3.5 bar on a standard

basis. Additionally, such Chain Conveyors eature a double-strand

chain. A variable speed drive with requency converter ensures a

uniformmaterialowandacontrolledfeedingcapacity.

Chain Conveyor in shock-pressure proof design for coal mill feeding

Single-Strand Chain Conveyor as filterdischarge conveyor with gravity chain

tensioning

Chain Conveyor for handling limestone


20/28

W E C O N V E Y

20

mAteriAL reCePtion And trAnSFer

SAmSon SurFACe Feeder

SAMSON - Transfer of additives

The ideal solution or the reception o all bulk materials

in the cement industry such as cement clinker, coal and

pet-coke, clay, limestone, gypsum rock, FGD gypsum,

granulated slag, alternative uels.

Where materials are imported to cement plants by tipping

or dump trucks and transerred to the next process stepthe SAMSON Feeder oers an economical alternative to

conventional and expensive underground pits and hoppers.

Surace installation eliminates costly permanent civil

engineeringworksandallowsgreaterexibilityinplant

layout regardless o local ground conditions.

Since the SAMSON is a single integrated

machine it may be easily re-located to

accommodate plant development.

The SAMSON is available in dierent series

designed or a specifc range o applications.

Holding capacities up to 300 tons may be

provided with a controlled rate discharge.

SAMSON Surface Feeder - for crusher feedingin a quarry

Fasttruckdischarge

Nobridgingregardlessofmaterialhandling

characteristics

Minimumdustgeneration

Easyaccessformaintenance

Flexibilityinlocationandrelocation

ReducedenergydemandandoperatingcostMinimuminvestmentrisk

The Samson concept


21/28

Q U A L I T Y

21

CLinKer LoAding

teLeSCoPiC SPout

tyPe tS Integraldustcontrol

Lowandheavydutyoperation

The AUMUND Telescopic Spout with integral dust con-

trol ensures the loading o clinker into trucks, barges or

ships, oering an economic solution or low and heavy

duty operation.

The heavydutyversion o the telescopic spout is

designed or rapidly successive loading cycles and high

capacitiesofupto700t/h. This system is used in

more than 200 installations worldwide.

Applications with approximately fve loading cycles per

day and loading capacitiesof100t/hto150t/hare

theidealeldfortheapplicationofthelowduty

design. Due to the diminished segments, the smaller

hoist and the reduced dedusting volume, this system is

the economical solution or installations requiring a low

or medium handling capacity.

Ship loading Truck loading


22/28

W E C O N V E Y

22

CLinKer StorAge

Concrete silo with steel roof

Design, implementation and modernization o clinker

storage installations, customised as per requirements.

Cylindricalsteelplatesilos

Specialdesignforextremelylargestoragevolumes

Concretesilowithsteelroof

Circularstoragehallwithsteelroof

Circularstoragehallwithconcretewall

and steel roo

Toreceiveanoptimumoverallconveying

andstoragelayout,earlyimplementationof

experiencedlayoutengineersisrecommended.

CLinKer diSChArgeSiLo diSChArge gAtetyPe SAK

The design principle o the silo discharge gates

prevents the ree all o the clinker onto the

discharge conveyor. The low throughput rate,

corresponding to the discharge rate o the pan

conveyor, eectively avoids dust generation

(gravity principle).

Thesystematicalternatingbetweenthesilo

dischargegatesensuresauniformdischarge

oftheclinkeroverthewholesilobasis.

Clinker storage hall with concrete wall and steel roof

Gravity silo discharge


23/28

Q U A L I T Y

23

AutomAtiCCLinKer diSChArgetyPe moLeX

Successfullyoperating

Lowerinvestment

Loweroperatingand

maintenancecosts

The discharge system MOLEX is the

successor o the residue-ree discharge

systemMOLEwhichissuccessfully

operating in several cement plants.

The MOLEX operates in the same way as

the proven predecessor with the dierence

that no central column is required and the

housing structure o the discharge unit

is protected rom the load o the clinker

stockpile by a concrete garage.

Largeractivestock

Upto97%clinkerreclaim

Availabilityofclinkerevenduringyearlykiln shutdown

Blendingofoldandfreshclinker

Blendingofcoarseandne-grained

clinker

Almostconsistentclinkermixtureformill

eeding

Lower investment and/or operating and

maintenance costs are the result o:

Reductiontoonlyonereclaimtunnel Lessconveyorsanddischargegates

Reducedstoragevolume,asupto97%of

the volume is active and can be reclaimed

Noresiduestocktoberemovedwith

loading shovels

Version with central column

Scraper chain drive

Covered stockpile with automatic discharge


24/28


25/28

Q U A L I T Y

25

AFter-SALeSServiCeS

CustomerProximityaroundtheWorld

At AUMUND, service does not end at the sale o the

equipment.Itsthebeginningofalong-termpartnership.

AUMUND oers you a ull range o services rom

commissioning to the delivery o quality spare and wear

parts to customized preventive maintenance programs

and equipment upgradings. The benefts or you:

Maximum equipment efciency at lower operating costs.

CommissioningandFieldService

Today, presence on the spot is an absolute must.Thereore, our commissioning and service engineers

operate rom support centers on all continents to

guarantee immediate and competent support.

SpareandWearParts

A comprehensive range o genuine spare parts is

available or our entire product range rom stocks

in Germany, Great Britain and the USA. Our product

specialists provide assistance and respond instantly.

RetrotsAged and worn equipment? Capacity increase needed?

Too high operating cost? Aumund just as new retrofts

are economical and tailor-made solutions or improving

your existing equipment at reasonable cost.

PreventiveMaintenance

Knowing beorehand that service will be needed allows

you to schedule downtime and save money with timely

repairs. Repairs or retrofts can be accurately anticipated

allowing or the downtime to be at the most convenient

times and at the lowest possible cost.


26/28

W E C O N V E Y

26

other Aumund grouP equiPmentin the Cement induStry

StoCKyArdteChnoLogy

Portal,bridge-typeor

cantileverreclaimers

Longitudinalstockyards

andblendingbeds

Fixedandmobilestackers

Waggontippers

Circularstockyardsandblendingbedswithportal,

semi-portal,bridge-type

orcantileverreclaimer

BuLK mAteriALimPort AndeXPort Eco-Hopper

MobileShiploaders

Stormajor

MobileLinkConveyors

Bridge Scraper Reclaimer for limestone

Mobile Shiploader with Samson Feeder handling clinker for export


27/28

Q U A L I T Y

27

the Aumund grouP

Stacker & Bridge Scraper Reclaimerin circular storage for limestone

Cantilever Scraper Reclaimer for additiveand corrective material

Unloading hoppers for clinker and additives

Stormajor handling pet-coke

GERMANY

AUMUNDFrdertechnikGmbHSaalhoer Str. 1747495 RheinbergPhone: +49 - 2843 - 72 0Fax: +49 - 2843 - 6 02 70e-mail: [email protected]

AumundLogisticGmbHSaalhoer Str. 1747495 Rheinberg

Phone: +49 - 2843 - 72 0Fax: +49 - 2843 - 7 24 73e-mail: [email protected]

SCHADELagertechnikGmbHDorstener Strae 36044653 HernePhone: +49 - 2325 - 58 74 0Fax: +49 - 2325 - 58 74 74e-mail:[email protected]

GREATBRITAIN

B&WMechanicalHandlingLtd.

Gemini House CambridgeshireBusiness Park, 1 Bartholomew`s WalkEly, Cambridgeshire CB7 4EAPhone: +44 - 1353 - 665 001Fax: +44 - 1353 - 666 734e-mail: [email protected]

INDIA

AUMUNDEngineeringPrivateLtd.2nd Floor, Lakshmi Neela Rite ChoiceChambers 9, Bazulla Road,T. Nagar Chennai - 600 017Phone: +91 - 44 - 4393 63 00Fax: +91 - 44 - 2815 60 46e-mail: [email protected]

HONGKONGSAR

AUMUNDAsia(H.K.)LimitedSuite 1301, Oxord House,Taikoo Place, 979 Kings Road,Quarry BayHong KongPhone: +852 - 3695 - 43 33Fax: +852 - 3695 - 43 11e-mail: [email protected]

DUBAIU.A.E.

AUMUNDFrdertechnikGmbHRepresentativeOfceP.O. Box 35291Dubai, UAE

Phone: +971 - 4 - 2823762e-mail: [email protected]

THENETHERLANDS

AUMUNDHoldingB.V.Wilhelminapark 405911 EE VenloPhone: +31 - 77 - 320 01 11Fax: +31 - 77 - 320 07 28e-mail: [email protected]

SWITZERLAND

AUMUNDAGArther Str. 3

6301 ZugPhone: +41 - 41 - 710 10 82Fax: +41 - 41 - 710 42 02e-mail: [email protected]

RUSSIA

AUMUNDRepresentativeOfceGerman-Russian House, Ofce 44ul. Malaja Pirogovskaja 5119435 Moscow / RussiaPhone: +7 - 495 - 287 90 02Fax: +7 - 495 - 287 90 06e-mail: [email protected]

FRANCE

AUMUNDFranceS.A.R.L.43, rue de Trvise F 75009 ParisPhone: +33 - 1 - 42 46 72 72Fax: +33 - 1 - 42 46 72 74e-mail: [email protected]

BRAZIL

AUMUNDLtda.Rua Haddock Lobo, 337 - 11. andar01414-001 So Paulo, SPPhone: +55 - 11 - 3059 0160Fax: +55 - 11 - 3059 0161e-mail: [email protected]

USA

AUMUNDCorporation

1825 Barrett Lakes BoulevardBarrett Lakes Center IISuite 520Kennesaw, GA 30144Phone: +1 - 770 - 226 - 95 78Fax: +1 - 770 - 953 - 48 44e-mail: [email protected]

P.R.CHINA

AUMUNDMachineryTrading(Beijing)Co.Ltd.Rm. 7-8, 22-F, East Ocean CentreNo. 24 Jianguomenwai AvenueChaoyang DistrictBeijing 100004Phone: +86 - 10 - 65 15 58 13 / 14

Fax: +86 - 10 - 65 15 58 15e-mail: [email protected]


28/28

W E C O N V E Y Q U A L I T Y

www.aumund.com

AUMUND Headquarters in Rheinberg, Germany

Your partner or all requirements regarding material

handling and storage.We design, engineer, manuacture, erect and service

reliable equipment.

Reputation and competence proven by more than

10.000 installations in over 100 countries.

GB

Technicaldatasubjecttochangewithoutnotic

eA-GB-04-XI/11-MA.2

011byAUMUNDF

rdertechnikGmbH.Allrightsreserved.

Conveying and Storing

Documents

Transcript of Conveying and Storing