PO

RTA

BLE

RA

MP

SC O N V E N I E N C E M A D E S I M P L EHarmar ramps are an easy and affordable solution for managing access across thresholds and small elevation changes. Our wide choice of solutions work indoors and out for residential, commercial, and vehicle applications. With our range of lengths, widths and weight capacities, a Harmar ramp can be designed to your specific needs.

FOLDING RAMPS

Single-Fold RampLightweight, Portable, And Ultra-Strong

• Capacity: 800 lbs.

• Width: 30” 2’ to 5’ lengths available

• Weighs just 11 lbs. to 34 lbs, depending on length

Full length, low-profile hinge adds strength, stability and maintenance-free operation. Welded construction with non-skid tread for traction. Self-adjusting bottom transition plate converts easily from ramp to ground. Ergonomic, non-breakable handles provide a comfortable grip for easy carrying.

Portable Multi-Fold RampHandles Larger Elevation Changes Easily

• Capacity: 800 lbs.

• Width: 29.5” 6’ to 10’ lengths available

• Weighs 38 lbs to 60 lbs, depending on length

Unique three-fold design lets wheelchairs and scooters access steps, vehicles, and raised landings. Use and carry as a unit or quickly separate into two lightweight halves, each with carrying handle. Skid-resistant surface on welded aircraft-grade aluminum with yellow safety strips. Self-adjusting bottom transition plate converts from ramp to ground.

Extended Reach Ramp Attachment Reaches over large vehicle bumpers. Attaches to Multi-Fold and Single-Fold ramps above to increase the standard 3” top lip to 9,” allowing the ramp to clear an SUV or van rear bumper.

Note: When added to a Single or Multi-Fold ramp above, weight capacity is reduced to 550 lbs.

T h E P R A C T I C A L S O L u T I O N T O E L E V A T I O N C h A N g E S .

SOLID RAMPS

Heavy-Duty Threshold RampCreates a Path for Scooters, Walkers or Wheelchairs

• Capacity: 600 lbs.

• Width: 32” 3’ to 8’ lengths available

• Weighs 38 lbs to 60 lbs, depending on length

Sturdy, aircraft-grade aluminum design with skid-resistant surface creates a secure solution over smaller elevation changes. Offers temporary or semi-permanent home access. Self-adjusting bottom transition plate for easy conversion from ramp to ground. No assembly or folding required.

Lightweight Threshold Ramp Portable Wheelchair Access

• Capacity: 600 lbs.

• Width: 34” 1” to 6” heights available

• Weighs 8 lbs to 35 lbs, depending on height

Lightweight yet portable wheelchair ramp for doorways, sliding glass doors and raised landings. Can be used singly or combine two for safe entry and exit. High-strength, rust-free aluminum with non-skid driving surface.

Rubber Threshold Ramp Doormat Style Wheelchair Access For Doors and Landings

• Capacity: 850 lbs.

• Width: 36” 1.5” to 2.5” heights available

• Weighs 14 lbs to 40 lbs, depending on height

Portable wheelchair ramp works at doorsill, inside or out, to provide a smooth ground-to-sill transition. Especially practical for sliding doors since it does not interfere with door track. ADA approved, of slip-resistant, 100% recycled tires for years of continued use.

800-833-0478 | www.harmar.com © 2012 Harmar MKT-BR-RAMPS-0412