Contract briefing opti qmax 4388 presentation

Leadcom (M) Sdn Bhd

System Overview of Minimux Fiberlogic OptiqView 4388

Broader, Smarter Managed Broader, Smarter Managed AccessAccess

FOMFOM

SDH

ADM

PSTN

PABX

DLC

Mini DSLAM

Edge Router

Internet

E1 Multiplexer

RoutersFE1

2G/3G Base Station

Building or Remote SideBuilding or Remote Side100KM

OptiQmax 4388 E1/T1/Ethernet/V.35 Fiber Optical OptiQmax 4388 E1/T1/Ethernet/V.35 Fiber Optical Multiplexer is an interface equipment between Optical and Multiplexer is an interface equipment between Optical and Electrical line facilities to carry structured/ unstructured Electrical line facilities to carry structured/ unstructured E1 and/or T1 signals, Ethernet, V.35 over a single mode E1 and/or T1 signals, Ethernet, V.35 over a single mode fiber for telephone, video, data and wireless applications.fiber for telephone, video, data and wireless applications.

OptiOptiQQmax 4388 FOM Application Diagrammax 4388 FOM Application Diagram

Central OfficeCentral Office


The outlook of OptiQmax 4388The outlook of OptiQmax 4388

Broader, Smarter Managed Broader, Smarter Managed AccessAccessOptiOptiQQmax 4388 max 4388

1616××E1/T1/Ethernet/V.35 Fiber E1/T1/Ethernet/V.35 Fiber Optical MultiplexerOptical Multiplexer

Power Indicators X 2

System Status Indicators

Tributary Status Indicators X 16

Aggregation Status Indicators

Alarm I/O Relay

Console Port

SNMP Port

SFP Slot for Aggregation

ACO Switch

LCD Display with Key Control

110~

220V

AC

OFFON

FG RTN -48V

DC

OFFON

E1 /T1 4 Ports E1 /T1 4 Ports

Slot 1 Slot 2 Slot 3 Slot 4

E1 /T1 4 Ports E1 /T1 4 PortsE1 /T1 4 Ports

E1/T1 Module X 4 AC Power Module

DC Power Module

FAN Unit


Mux/ Demux Processor

T1/E1 Driver& Framer

#1 T1/E1 Signal

#2 T1/E1 Signal

#N-1 V.35 Signal

#N Ethernet Signal

CPU

LED LEDAlarm RelayAlarm Relay

‧‧‧

N=4/8/12/16

E/O TX1

NVRAM

LCD LCDKey/SwitchKey/SwitchCIDCID100/10BaseT100/10BaseT




O/E RX1

E/O TX2

O/E RX2

OptiOptiQQmax 4388 FOM System Block max 4388 FOM System Block DiagramDiagram


☆ Removable 1+1 SFP Laser Module, Hot-swappable and with Optical Power Reading and Auto Laser Shutdown.

☆ Support Unidirectional (2 fibers) or Bidirectional (1 fiber) Optical transmission.

☆ SFP DFP Laser Module for 1550nm Long-haul (100 KM) Available.

☆ Provides 2 Slots for Removable Power supply, 1+1 Hot-standby and Load Sharing.

☆ Robust, Rugged and Compact design, 1U high.

☆ Each FOM Unit can Accommodate 4 E1 Tributary cards. ☆ E1 Tributary Card is Hot-swappable.

☆ Each T1 or E1 circuit has its own independent line driver/framer. Clock slip hazard is avoided.

OptiOptiQQmaxmax 4388 System4388 System OverviewOverview


OptiOptiQQmaxmax 4388 System4388 System Overview Overview (cont’d)(cont’d)

System Gain: 15 dB, application distance can up to 30 KM

Optical Source: 1310 or 1550 nm(Option)

1+1 optical protection switching, switching time ＜ 20ms, with lock-in feature.

Additional 2 Mb/s out-of-band EOC channel to support fast and smooth management of the remote unit.

Detailed LED Status and Alarm Indication

History log, up to 60 records, with time stamp.

Built-in standard 215-1 PRBS pattern generator and receiver.

Provide Optical and T1/E1 line/path performance monitoring.

Provides Hardware Power Loss Detection and Dying Gasp.

LCD display with functional keys, Console port and SNMP LAN port for ease of operation and management.


☆ Removable SFP Laser Module with 1+1 Optical Protection

Protection switching time ＜ 10ms

System gain up to 15dB 。 Optical power reading

Local F

OM

Rem

ote FO

M

TX1 W1

W2

RX1TX2

RX2

TX1RX1TX2

RX2

TX

TX1

TX2

RX1

RX2

RX

TX

TX1

TX2

RX1

RX2

RX

RDI RDI


TX

TX1

TX2

RX1

RX2

RX

TX

TX1

TX2

RX1(W1,LOS/RDI)

RX2(W2,LOS/RDI)

RX

RDI RDI

OPTICAL

W1

LOS/RDI

W2

LOS/RDI

TX

TX1

TX2

RX1

RX2

RX

TX

TX1

TX2

RX1(W1,LOS/RDI)

RX2(W2,LOS/RDI)

RX

RDI RDI

OPTICAL

W1

LOS/RDI

W2

LOS/RDI

RDI

☆1+1 optical SW Criteria


☆ Modular E1 Tributary Card Design ☆ E1 Interface (75 or 120 ohms), Complied to G.703 and G.704

CH 1 2 3 44-port E1(75 ohms), BNC

3

4

☆ Hot-swappable, No Bit Error Encountered when Performing the provisioning or remove the other channel or module.


Loopback Loopback

FOM A

E1 to Line local loopback

E1 to Optical remote loopbackFOM B

☆ 4 kinds of E1 loopback

FOM A FOM B

☆3 kinds of Optical loopback

E1 to Optical local loopback

E1 to Line remote loopback

Optical to Line local loopback

Optical to optical local loopback to remote

Optical to optical remote loopback to remote

Line SideLine Side

Optic Side

Optic Side

Line SideLine Side

Local

Remote

Local

Remote

Broader, Smarter Managed Broader, Smarter Managed AccessAccess ☆ PRBS Test

System build in standard Unframed 215-1 Pattern Generator 及 Detector ， Via CID 、 SNMP or LCD to execute and display the result of Error Count 、 Bit Error Rate 。 Ex: Local is FOM A and Remote is FOM B ， all PRBS test performed by FOM A ， there are 5 kinds of E1 PRBS test ：

FOM A FOM B

PRBSGenerator

& Receiver

A ： from Local FOM—Through Optical --- to Local FOM , after E1 remote loopback 。

FOM B

PRBSGenerator

PRBSReceiver

FOM A

B ： From Local FOM---Through Optical---to Remote FOM


☆ 2 Pluggable Power Module Slots, can insert either AC or DC Module

☆ 1+1 Hot-standby and Load Sharing

☆ Loss of Power Detection and Dying Gasp (Hardware)

☆ Hot-swappable, No Bit Error Encountered for Optical and E1 interface

Broader, Smarter Managed Broader, Smarter Managed AccessAccess ☆ Temperature Harden

Wide range of operating environmental condition: 0 to 65 Celsius degree, 90% Relative humidity. The right hand side illustrated the test report of BER test of OptiQmax 4388 that tested by CHT-TL, Taiwan (Test case: TST-98-10-NA-02). The test conditions are continuously operating at (1) 24 hour at room temperature (2) 72 hours at 65 Celsius degree, 90% R.H. (at 65 Celsius degree) (3) 72 hours at 0 Celsius degree All of these three tests are 0 bit error encountered for All the E1 tributaries.


Single-ended Maintenance Capability Single-ended Maintenance Capability

TX1

Local F

OM

Rem

ote FO

M

W1

W2

RX1TX2RX2

TX1RX1TX2RX2

LCD Display with Key Control

Data Craft Interface

SNMP Network Management System

Embedded Operation Channel


Fiber Logic OptiQview EMSFiber Logic OptiQview EMS

Virtual Panel Virtual Panel OperationOperation


Performance Monitoring table as shown below

With built-in T1/E1 framer in each channel, detailed performance data can be monitored and recorded.

Threshold values for the above performance monitoring data can be set thru CID, SNMP manager or LCD functional keys for 15-minute, 1 hour and 1 day record interval.

OptiQmax 4388 is not only a transmission equipment, but also is a performance monitoring system for demarcation point.

OptiOptiQQmax 4388 Performance max 4388 Performance MonitoringMonitoring

Optical AggregateOptical Aggregate T1T1 E1E1

Near-End LineNear-End Line ESES 、、 SESSES CVCV 、、 ESES 、、 SESSES CVCV 、、 ESES 、、 SESSES

Near-End PathNear-End Path ESES 、、 SESSES 、、 UASUAS CVCV 、、 ESES 、、 SESSES 、、UASUAS

CVCV 、、 ESES 、、 SESSES 、、UASUAS

Far-End LineFar-End Line ESES 、、 SESSES CVCV 、、 ESES 、、 SESSES CVCV 、、 ESES 、、 SESSES

Far-End PathFar-End Path ESES 、、 SESSES 、、 UASUAS CVCV 、、 ESES 、、 SESSES 、、UASUAS

CVCV 、、 ESES 、、 SESSES 、、UASUAS


Q&A SessionQ&A Session

Contract briefing opti qmax 4388 presentation

Technology

Transcript of Contract briefing opti qmax 4388 presentation