continuous phase modulation by nit
description
Transcript of continuous phase modulation by nit
![Page 1: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/1.jpg)
Continuous Phase Modulation (CPM)
• CPM– Carrier phase varies in a continuous manner– Constant envelope
• An infinite variety of CPM signals can be generated by adjusting– Frequency pulse shaping functions– Modulation index h– Modulation alphabet size M– Pulse duration L
• Phase transition diagram
• Spectra of CPM signals– Compact PSD: narrow main lobe and fast sidelobe roll-off
![Page 2: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/2.jpg)
Continuous Phase Modulation
• Sidebands produced by modulation schemes like FSK and PSK can interfere with nearby channels (adjacent channel interference) or with other communications systems (co–channel interference). It is important that modulation used to transmit information over the radio channels of a cellular phone network be bandwidth efficient so that more subscribers can be served in a given frequency band.
• In addition, modulation schemes that introduce phase discontinuities will tend to introduce undesirable frequencysidelobes when amplified through a non–linear ampli-fier. However, linear amplifiers are less power efficient(transmitted power versus power supplied) than non–linear (Class C) amplifiers.
![Page 3: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/3.jpg)
Continuous Phase Modulation• By imposing, within a modulation scheme, that the phase
of a carrier be continuous from one symbol to the next,the level of sidebands of the transmitted signal can bereduced. In conventional FSK or PSK the phase of thecarrier may change at the beginning of each symbol.
• Some improvement in the case of QPSK modulation isintroduced by a variation called offset QPSK (OQPSK),which limits the range of possible phase variations. Con tinuous phase is effectively achieved with CPFSK (continuous phase frequency shift keying) schemes like minimum shift keying (MSK).
![Page 4: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/4.jpg)
Variations on CPM
• Minimum Shift Keying (MSK)
– Special form of CPFSK– Minimum spacing that allows two frequencies states to be orthogonal– spectral efficient, easily generated
• Gaussian Minimum Shift Keying (GMSK)
– MSK + premodulation Gaussian lowpass filter– Increase spectral efficiency with sharper cutoff,excellent power efficiency due to constant envelope– Used extensively in 2nd-generation digital and cordless
telephone applications
![Page 5: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/5.jpg)
![Page 6: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/6.jpg)
![Page 7: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/7.jpg)
![Page 8: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/8.jpg)
![Page 9: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/9.jpg)
![Page 10: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/10.jpg)
![Page 11: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/11.jpg)
![Page 12: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/12.jpg)
![Page 13: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/13.jpg)
CPM• g(t) is a pulse, e.g., rectangular, RC,…
If g(t)=0 , t>Ts ► Full-response CPM
If g(t) ≠0, t > Ts ► Partial-response CPM
• Different CPM signals can be generated by
varying M, {h}, and g(t)
• If q(t) is rectangular pulse, the CPM is
continuous-Phase FSK (CPFSK)
• Furthermore, if h = ½ ► CPFSK is called
Minimum Shift Keying (MSK)
![Page 14: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/14.jpg)
Minimum shift keying (MSK)
• Goal: avoid sudden change.
• Two frequencies are used, f2 =2f1.
• Separate into even and odd bits.
• The duration of each bit is doubled.
– A higher frequency is chosen if even and odd bits are equal.
– The signal is inverted if the odd bit equals 0.
![Page 15: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/15.jpg)
Example of MSK
![Page 16: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/16.jpg)
MSKSimilarly to OQPSK, MSK is encoded with bits alternating between quarternary components, with the Q component delayed by half a bit period. However, instead of square pulses as OQPSK uses, MSK encodes each bit as a half sinusoid. This results in a constant-modulus signal, which reduces problems caused by non-linear distortion.
![Page 17: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/17.jpg)
MSK• The spacing between the two carrier
frequencies is the minimum: Δf = 1/2Ts
Hence, it is called minimum shift keying
![Page 18: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/18.jpg)
![Page 19: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/19.jpg)
![Page 20: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/20.jpg)
![Page 21: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/21.jpg)
![Page 22: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/22.jpg)
Minimum shift keying
Proper utilization of phase during detection, for improving noise performance
Complexity increasesCPFSK (Continuous-phase frequency-shift keying)
.
0])0(2[2
1])0(2[2
)(
2
1
SymbolfortfCosT
E
SymbolfortfCosT
E
ts
b
b
b
b
θ(0) denotes the value of the phase at time t=0
![Page 23: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/23.jpg)
])(2[2
)( ttfCosT
Ets c
b
b
An angle-modulated wave
θ(t) is the phase of s(t), continuous function of time.
)(2
121 fff c Carrier frequency
Phase bb
TttT
ht 0)0()(
)ff(Th 21b Deviation ratio
Measured with respect to bit rate 1/Tb
![Page 24: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/24.jpg)
At time t=Tb
0
1)0()(
Symbolforh
SymbolforhTb
Phase Tree
![Page 25: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/25.jpg)
Phase Trellis, for sequence 1101000
![Page 26: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/26.jpg)
)2()]([2
)2()]([2
)( tfSintSinT
EtfCostCos
T
Ets c
b
bc
b
b
In terms of In phase and Quadrature Component
bb
TttT
t 02
)0()(
+ Sign corresponds to symbol 1
- Sign corresponds to symbol 0
h=1/2
![Page 27: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/27.jpg)
bbbb
b
bb
b
b
b
TtTtT
CosT
E
tT
CosCosT
E
tCosT
Ets
2
2
2])0([
2
])([2
)(1
For the interval of bb TtT
Half cosine pulse
In phase components
+ Sign corresponds to θ(0) =0- Sign corresponds to θ(0) = п
![Page 28: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/28.jpg)
bbb
b
bb
b
b
b
bQ
TttT
CosT
E
tT
CosTSinT
E
tSinT
Ets
202
2
2])([
2
])([2
)(
Quadrature components
+ Sign corresponds to θ(Tb) =п/2- Sign corresponds to θ(Tb) = -п/2
Half sine pulse
![Page 29: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/29.jpg)
Four possibilities
![Page 30: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/30.jpg)
bbcbb
TtTtfCostT
CosT
t
)2(
2
2)(1
bcbb
TttfSintT
SinT
t 20)2(2
2)(2
bTttststs 0)()()( 2211
Basic functions
![Page 31: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/31.jpg)
bbb
T
T
TtTCosE
dtttssb
b
)0(
)()( 11
bbb
T
TtTSinE
dtttssb
b
20)(
)()(2
0
22
coefficients
![Page 32: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/32.jpg)
![Page 33: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/33.jpg)
Signal Space Characterization of MSK
![Page 34: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/34.jpg)
![Page 35: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/35.jpg)
bb
T
T
TtTws
dtttxxb
b
11
11 )()(
b
T
Ttws
dtttxxb
20
)()(
22
2
0
22
0
2
0 4
1
N
Eerfc
N
EerfcP bb
e
0N
EerfcP b
e
![Page 36: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/36.jpg)
MSK Transmitter
![Page 37: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/37.jpg)
MSK receiver
Q-channel
![Page 38: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/38.jpg)
PSD of MSK• The PSD is given by:
P(∆f) = 16 / π2[cos(2 π ∆fT) / 1.16fT]• MSK has a wider first null than QPSK
but lower 99%-power BW
![Page 39: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/39.jpg)
PSD of MSK
![Page 40: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/40.jpg)
Problem:
Sketch the waveform of the MSK signal for the sequence for the 101101.Assume that the carrier frequencya) Is 1.25 times the bit rate. b) Equal to the bit
Solution (a) fc =(f1+f2)/2 =1.25/ Tb OR f1+f2=2.5/Tb
Also f1-f2=1/(2Tb)
Solving f1=1.5/Tb f2=1/Tb
(b) fc=1/Tb f1+f2=2/Tb f1-f2=1/(2Tb)\
Solving f1=1.25/Tb f2=0.75/Tb
![Page 41: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/41.jpg)
GMSK• GMSK is similar to MSK except it incorporates a premodulation
Gaussian LPF
• Achieves smooth phase transitions between signal states which can significantly reduce bandwidth requirements
• There are no well-defined phase transitions to detect for bit synchronization at the receiving end.
• With smoother phase transitions, there is an increased chance in intersymbol interference which increases the complexity of the receiver.
• Used extensively in 2nd generation digital cellular and cordless telephone apps. such as GSM
![Page 42: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/42.jpg)
Gaussian MSK (GMSK)• A derivative of MSK that uses a Gaussian pulse
shaping filter to filter the NRZ binary
modulating waveform
hG(t) = √π / α exp(- π2t2 / α2)
• This converts the signal from full-response CPM to a partial-response CPM signal
![Page 43: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/43.jpg)
Gaussian Pulse
![Page 44: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/44.jpg)
GMSKThe Gaussian pulse-shaping filter reduces the levelsof side-lobes of the GMSK spectrum compared toMSKIt can be coherently detected (as MSK) or noncoherently detected (as FSK)
Block diagram of a GMSK transmitter using MSK modulator
![Page 45: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/45.jpg)
GMSK• GMSK is characterized by its BT product:
- B is the 3-dB BW of the Gaussian filter- T is the symbol duration
• B = 0.5887/alpha, alpha is the filter parameter• As alpha increases B decreases
- Sidelobes power decreases- More spectral efficiency- But more ISI because pulse is wider
• MSK corresponds to alpha = 0• In GSM, GMSK is used with BT=0.3
![Page 46: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/46.jpg)
GMSK BT 90% BW 99% BW 99.9% BW 99.99% BW0.2 0.52 0.79 0.99 1.22
0.25 0.57 0.86 1.09 1.37
0.5 0.69 1.04 1.33 2.08
MSK 0.78 1.2 2.76 6.00
RF Bandwidth as a fraction of Rb
![Page 47: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/47.jpg)
Probability of Error• Is defined as the probability of detecting a
received observations as one signal given theother signal was transmitted
• It is a function of:- Distances between signals in the constellation (a function of the SNR)- Noise distribution (Usually Gaussian – AWGN)- Rx signal level distribution (in case of fading)
• The closer the signals in constellation, thehigher the error probability
![Page 48: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/48.jpg)
GMSK Performance• The GMSK filtering can cause ISI if the BT is
too small (too narrow filter and wide pulse)
• The GMSK error rate is given by:
• Pe = Q( √2δEb / No)
where δ = 0.68 for BT = 0.25
δ = 0.85 for BT = ∞
![Page 49: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/49.jpg)
![Page 50: continuous phase modulation by nit](https://reader035.fdocuments.in/reader035/viewer/2022081418/55cf9ae4550346d033a3e3c0/html5/thumbnails/50.jpg)
Performance Over Rayleigh Channels
•The performance is usually 20 to 40 dB worse than the AWGN case (no fading) for reasonable BER•This is mostly due to deep fades which occur often because of the Rayleigh distribution•For a Ricean or Nakagami fading distributions with large K-factor , or m, the error probability is smaller•This is because the probability of deep fade is smallerMitigation:-Diversity, Channel Coding, Adaptive modulation