Contents Industrial Ethernet Introduction Active ... · WaveLine switches ECO-Line switches...

I

Co

nte

nts

A

B

C

D

E

W

X

Industrial EthernetCAT

ALO

GU

E

9Industrial Ethernet Introduction

Active components

Passive components

Cable

Accessories

Appendix Technical appendix

Connection possibilities for redundant power supplies / Glossary

Index

Search according to Type or order number, Addresses worldwide

II

Industrial Ethernet

Product overview

WaveLine switches ECO-Line switches AdvancedLine switches Managed WaveLine switches

Page B.14 Page B.18 Page B.23 Page B.32

Managed Line switches IP 67 switches Decentralised I/O remotes WaveLine Router


GPRS alarm modem WLAN bridge SAI-Bluetooth Media converters


COMServer Power Over Ethernet Sets of IP67 plug-in connectors IP67 housing

Page B.74 Page B.78 Page C.10 Page C.13

Inserts IP67 outlet boxes Junction box, connector Terminal rail outlet

Page C.18 Page C.21 Page C.22 Page C.23

III

Product overview

19" patch panel IP20 plug-in connectors, RJ45 IP20 plug-in connectors, FO Built-in flange

Page C.26 Page C.27 Page C.29 Page C.34

M12 connection system Front panel interface Installation cables Connecting cables

Page C.38 Page C.44 Page D.5 Page D.9

Trailing cables RJ45 patch cables RJ45/M12 system cables FO connecting cables

Page D.13 Page D.17 Page D.19 Page D.35

FO system cables FO system cables Sheathing stripper Pressing tool

Page D.37 Page D.41 Page E.5 Page E.9

Cable tester Markers Overvoltage protection Switched-mode power units

Page E.11 Page E.15 modules Page E.19 Page E.21

Intr

od

uc

tio

n

A

A.1

Contents

Industrial Ethernet

Introduction Industrial Ethernet A.2

Network components from Weidmüller A.3

Online Services A.4

Cable configurator A.7

Intr

od

uc

tio

n

A

A.2

Industrial Ethernet

Industrial Ethernet

Over the past 20 years or so Ethernet has evolved to become

the standard network technology for the office and IT

environments. The compatibility of components from different

manufacturers has been a contributing factor. Technical

performance and reliability have also played a role in this trend.

This has resulted in a wide range of inexpensive and efficient

components and systems, and hence significant benefits for

users.

The majority of current Ethernet standards represent fully-

developed technology. A quick overview of the development

of Ethernet standards might look something like this:

1980 Standard „Ethernet V1.0“ (DEC, Intel, Xerox)

1982 Standard IEEE 802.3: „Yellow cable Ethernet“

1986 „Cheap-Ethernet“ (10BASE2)

1991 „Ethernet on Twisted-Pair“ (10BASE-T)

1995 Fast Ethernet (100BASE-T)

1998 Gigabit-Ethernet

2000 Ethernet IP

2001 Power link

2002 10 Gigabit-Ethernet

PROFINET

Ethercat

Industrial users have also recognised the advantages of bus

technologies and network solutions. For example, the 1990s

saw the development of fieldbus standards heavily based on

specific manufacturer’s specifications, and thus not compatible

with each other. From the point of view of their technical

development, these systems are without doubt very stable

these days, but the user is limited in the selection of a Fieldbus

system to only a few manufacturers. It is only possible to

change systems with great cost and with significant effort for

the training of personnel.

So why do we need Industrial Ethernet when the established

systems still work? There are a number of reasons for this:

enables system interoperability

Production data is directly accessible in the office

environment without the need for interfaces

available know-how for dealing with Ethernet networks

can also be used in the factory.

opportunities for a variety of applications (for example,

the transmission of images or the parallel use of network

resources).

interfaces for machines setup and maintenance, for example

Ethernet will continue to benefit from new developments in

the enormous IT network infrastructure market.

The possibilities for WLAN applications here are surely only

the beginning.

Industrial Ethernet is evolving into the dominant standard for

industrial network technology. With a universally applicable

technical standard as the basis, manufacturers can combine

networks and their components. Weidmüller can provide users

with long-lasting, maintenance-free electrical connections. With

traditional products for switching cabinets but also innovative

and standardised components for industrial networks.

Intr

od

uc

tio

n

A

A.3

Network components from Weidmüller

The Weidmüller product portfolio for Industrial Ethernet applica-

tions shows that we can be a dependable, high-quality partner

for all your requirements even in the age of “open automation”!

In the Industrial Ethernet market, Weidmüller is positioned as a

network infrastructure supplier in technology terms. Active and

passive components complemented by a range of accessories

for management, connection, supply, protection, switching,

conversion, amplification, disconnection and communication

functions.

The Weidmüller network components show how we focus on

one key area of our expertise: connection technology from the

control to the field – all from one supplier. What this means

for Industrial Ethernet applications is in addition to the purely

electromechanical products such as plugs, cables and outlets,

Weidmüller can also supply a series of electronic devices

necessary for the standardised operation of a multi-service

network infrastructure. A comprehensive range of products

for industrial applications – all from one supplier. This enables

planners and installation personnel to set up a fully equipped

network. Weidmüller can also supply proven products such as

signal converter conditioners, switch-mode power units, cable

devise and terminal markers and a wide selection of tools.

Industrial Ethernet

Intr

od

uc

tio

n

A

A.4

5

8

7

6

1

4

3

2

Visit our network infrastructure micro-site at

http://networkcomponents.weidmueller.com

The micro-site is updated continuously and is available in

German, English and Spanish. We look forward to your

mouse click!

3D factory workshop

Our factory workshop is found at our micro-site. Click on the various sections of the assembly line to learn more about the

application fields for our products. The 3D factory workshop is an interactive experience, with 3-D product animations, drawings

and films.

Online Services

Network infrastructure micro-site

Intr

od

uc

tio

n

A

A.5

Online Services

1 Materials handling

IE-line connector line, in IP67

with STEADYTEC technology

2 Switchgear cabinet in the facility / Power distribution

FrontCom® lockable, in IP65

for security and remote

maintenance

3 Human Machine Interface

WaveLine switches in

compact plastic housing

rugged aluminium

4 Robots

Sturdy connection with the M12

connection system

5 Sub-distribution board

Sturdy junction boxes in

die-cast aluminium housing,

for implementing Ethernet in

the harshest IP67 industrial

environments.

6 Cable conduit

Cabling of machine workshops,

with installation or connection

conductors using copper or

fibre-optic cable

7 Robotics switchgear cabinet

Reliable connection for

your installation cable with

mounting-rail outlets

8 Forklift

The WaveLine WLAN bridge,

for error-free operation within

the production facility

Intr

od

uc

tio

n

A

A.6

Online Services

Online product catalogue

With one-click selection for the product data sheet of your choice.

If you have questions about the specifications and details of

our products, perhaps even outside normal business hours,

then our online catalogue at

http://catalog.weidmueller.com

– open 24 hours a day, 365 days a year – is the perfect source

of information. Besides product features and part numbers, it

contains extensive additional information on all product groups.

And for further information, offers and your personal contact,

simply consult the Weidmüller website at

www.weidmueller.com

Intr

od

uc

tio

n

A

A.7

Cable configurator

Cable configurator

The cable configurator allows you to configure your specific

order – and ready.

Make your selection from the list of available cables (material

for cable sheathing, category, colour, …). Then choose the

connector for the right and left cable end. Then choose the

cable length. Configurations which are not possible are marked

in red, so that it is not possible to create an unsupported or

wrong configuration.

A variety of cables and connectors are available from our

Industrial Ethernet product line. These selections include category

5 or 7 cable, with PVC sheathing, in PUR, and of course

PROFINET-specific cable. A number of versions are available on

PushPull (V4) versions, bayonet (V1) and RockStar®

The fibre-optic cable is configured similarly: simply choose the

your customized cable. IP67 versions are also available here.

After you have made your selection, there are several available

options:

for quote or order.

The cable configurator is your quickest path to finding the specific

industrial Ethernet cable which you need.

Whether you are looking for a fibre-optic or copper cable, the

wconfigurator will find it for you.

Intr

od

uc

tio

n

A

A.8

Ac

tive

co

mp

on

en

ts

B

B.1

Contents

Active components

Active components

Introduction B.2

Switches with no management function B.12

Switches with management functions B.26

IP67 switches B.36

Decentralised I/O remotes B.40

Security router B.46

Industrial wireless B.56

Optical media converter B.70

Serial media converter B.74

Power over Ethernet B.78

Ac

tive

co

mp

on

en

ts

B

B.2

Introduction

Industrial Ethernet – Active components

Intelligent data distribution in the electrical cabinet:

unmanaged and managed switches.

Many applications require a central switch in the switching

cabinet for the decentralized setup of industrial networks.

Unmanaged switches are the simplest entry point into the world

of Industrial Ethernet They are self-configuring and allow you to

quickly and conveniently setup industrial network infrastructures.

Managed high-performance switches can be used to control

the flow of data for complex demands. Simple web-interface

configuration is possible by means of the integrated software

program, or with a terminal emulation program using an RS232

or USB port.

Weidmüller offers all versions from 3–24 ports, in various

shapes, for the ideal fit regardless of the installation

requirements. Switches with fibre optic ports are also available

for transmission paths which are very long or stretches exposed

to high electromagnetic interference. Weidmüller also delivers

versions for the electrical cabinet and versions with IP67 housing

for use directly „in the field“. Industrial-standard versions are

available, as are versions with an extended temperature range

(-40 to +75°C). Naturally, these products comply with all relevant

industrial and application testing standards.

Secure gateways between networks: the router and the

GPRS alarm modem.

Routers are anywhere when multiple networks need to be

connected together. Routers are responsible not only for

connecting the networks but also for securing them by

regulating access to nodes and data within the networks.In

addition to Ethernet routers, Weidmüller offers routers for

establishing connections on top of public networks, whether

they are the Internet or (analogue, digital or wireless) telephone

networks. If required, Weidmüller can also deliver turnkey

„out-of-the-box“ solutions for the remote monitoring of industrial

facilities.

Transformation and adaptation: the media converter,

ComServer and WLAN bridge.

Weidmüller offers a comprehensive line of network components

for adapting and converting interfaces: the ComServer can be

used when devices which lack their own Ethernet interface need

to be connected to the net.Media converters allow you to adapt

existing interfaces by converting a copper interface to fibre-

optic, or vice versa. WLAN bridges allow you to establish

wireless connections between network nodes.

Ac

tive

co

mp

on

en

ts

B

B.3

Introduction

Overview

Switches with no management function

IE-SW5-ECO IE-SW4/1SC-ECO IE-SW5-ECO-FLAT IE-SW8-ECO IE-SW5-WAVE IE-SW3/1SC-WAVE

IE-SW8-WAVE IE-SW6/2ST-ECO IE-SW8-ADVANCED IE-SW22/2ST-ADVANCED IE-SW8/2GBIT-ADVANCED

Switches with management function IP67 switches

Decentralised

I/O remotes

IE-SW6/2SC-1300-M-WAVE IE-SW8-2DIO-M-WAVE IE-SW22/2ST-M IE-SW8-M-IP67 SAI-AU

Security router Industrial wireless

IE-AR-100T-WAVE IE-GPRS-I/O SAI Bluetooth IE-WLAN-BRIDGE-WAVE

Optical media converter Serial media converter Power over Ethernet

IE-MC-SC-WAVE IE-MC-ST COMServer PoE Injektor

Ac

tive

co

mp

on

en

ts

B

B.4

Introduction

The total Industrial Ethernet solution - all from a single source

Active components

Connection elements Cable Power supply Surge protection markers Accessories

Starting at Chapter C Starting at Chapter D Starting at Chapter E Starting at Chapter E Starting at Chapter E Starting at Chapter E

Ac

tive

co

mp

on

en

ts

B

B.5

Introduction

WaveLine Switches unmanaged

EMC Shock- & vibration-test Environment-test

EN 61000-4-2 (ESD) 6kV/8kV

EN 61000-4-3 (radiated immunity)

ENV 50204 @AM 10V/average 80MHz - 2,7GHz

EN 61000-4-4 (burst) ~ 2kV; 2kV; I/O 4kV

EN 61000-4-5 (surge) 2/1kV

EN 61000-4-6 (conducted immunity)

ENV 50204 @10V 150kHz - 80MHz

EN 61000-4-29 (voltage variation)

EN 55022 (HF E)

conducted emissions 150kHz - 30MHz

radiated emissions 30MHz - 1GHz pp/average

radiated emissions 30MHz - 1GHz pp/qp

IEC 60068-2-6 sinusoidal vibrations

frequencies: 10-57 Hz, amplitude: 0.3 mm

frequencies: 57-500 Hz, acceleration: 2g

IEC 60068-2-27 Shock test, half-sinusoidal

shock acceleration: 15g (operating) 30g (non operating)

shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2

operating -25°C ... 70°C

non operating -40°C ... 85°C

IEC 60068-2-14 thermal shock

operating 0°C ... 60°C


IEC 60068-2-30 damp heat

WaveLine Switches managed


EN 61000-4-2 (ESD) 6kV/8kV




EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz


EN 55022 (HF E)





frequencies: 5-8,4 Hz, amplitude: 3,5 mm

frequencies: 8,4-150 Hz, acceleration: 1g



shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







WaveLine Media Converter


EN 61000-4-2 (ESD) 6kV/8kV




EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz


EN 55022 (HF E)







IEC 60068-2-27 shock test, half-sinusoidal


shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







WaveLine COMServer / WLAN bridge


EN 61000-4-2 (ESD) 6kV/8kV




EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz


EN 55022 (HF E)









shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







Approvals and Certifications

In order to be adequately prepared for harsh industrial condi-

tions, our products have been tested for compliance with the

PLC standard IEC 61131-2:2007.

The Standard IEC 61131-2 for PLCs is entitled „Programmable

Logic Controllers – Part 2: Equipment Requirements and Tests“.

It describes requirements pertaining to EMC (electromagnetic

compatibility), shock and vibration resistance, and environmental

temperatures. These limit values in the IEC standard are fairly

similar to the requirements we have encountered in the real

world. Our products comply with the following basic standards

in detail:

Ac

tive

co

mp

on

en

ts

B

B.6

Introduction

ECO-Line


EN 61000-4-2 (ESD) 6kV/8kV




EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz


EN 55022 (HF E)




IEC 60068-2-1 & IEC 60068-2-2



AdvancedLine unmanaged


EN 61000-4-2 (ESD) 6kV/8kV


ENV 50204 @AM 10V/average 80MHz - 1GHz


EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz

EN 61000-4-11


EN 55022 (HF E)









shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







AdvancedLine managed


EN 61000-4-2 (ESD) 6kV/8kV




EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz

EN 61000-4-11


EN 55022 (HF E)









shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







Media Converter


EN 61000-4-2 (ESD) 6kV/8kV




EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz

EN 61000-4-11


EN 55022 (HF E)









shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







Ac

tive

co

mp

on

en

ts

B

B.7

Introduction

IP 67 switch


EN 61000-4-2 (ESD) 4kV/8kV




EN 61000-4-5 (surge) 0,5/1kV


ENV 50204 @10V 150kHz - 80MHz

EN 61000-4-11


EN 55022 (HF E)









shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







Access router


EN 55022:1995, Class A

EN 55024 1998

EN 61000-4-2 (ESD) 4kV/8kV

EN 61000-4-3 (radiated immunity) @AM 10V/average 80MHz - 1GHz

EN 61000-4-4 (burst) 2kV; I/O 1kV

EN 61000-4-5 (surge) 1kV

EN 61000-4-6 (conducted immunity) @10V 150kHz - 80MHz


EN 55011 (HF E)









shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2




GPRS-Line IO Quad


EN 61000-4-2 (ESD) 4kV/8kV




EN 61000-4-5 (surge) 0,5kV


ENV 50204 @10V 150kHz - 80MHz

EN 61000-4-11


EN 55022 (HF E)







shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2




WaveLine router (still in certification process)


EN 61000-4-2 (ESD) 6kV/8kV




EN 61000-4-5 (surge) 2/1kV


ENV 50204 @10V 150kHz - 80MHz


EN 55022 (HF E)





frequencies: 5-8,4 Hz, amplitude: 3,5 mm

frequencies: 8,4-150 Hz, acceleration: 1g



shock period: 11ms

IEC 60068-2-1 & IEC 60068-2-2







Ac

tive

co

mp

on

en

ts

B

B.8

Technician

PC with

Configurator

Firmware update Managed

switches

Security

router

Serial media

converter

Firmware update

Change configuration

Customer

Introduction

Weidmüller Device Configurator

Weidmüller has developed an in-house software solution for

configuring our line of active Industrial Ethernet devices.

With the Weidmüller Device Configurator, you can update the

firmware or configuration on individual devices or on device

groups. The Configurator enables a wide range of configurable

settings which vary depending on the device.

The following products are supported by the Configurator:

– WaveLine managed switches

– WaveLine security routers

– WaveLine WLAN bridges

– WaveLine serial media converters

The Configurator is based on the Eclipse Rich Client platform,

which requires the Java run-time environment. We are thus able

to deliver our Configurator for Windows, Linux and MacOS

platforms.

The Configurator can be used to perform remote maintenance,

such as updating the firmware for any supported device. The

PC on which the Configurator runs does not need to be

connected on-site. Changes and settings can similarly be

carried out using the Configurator.

Remote maintenance with the Device Configurator

Configurator characteristics include:

– Eclipse Rich Client platform and Java development/software

platform

– runs under Windows, Linux and MacOS (with the relevant

drivers installed)

– enables configuration of all supported devices with one program

– firmware updates for all supported devices using the

Configurator

– location and group assignments to facilitate device

administration

Functional scope for supported Industrial Ethernet devices, the

WaveLine serial media converter and the WaveLine WLAN bridge

– full configuration of ComServer is possible within the

Configurator

– setup of virtual COM port drivers

WaveLine SWxx-M

– firmware can be updated via Ethernet or serial port

– configuration can be imported or exported over the Internet

– IP settings can be imported or exported

– SNMP settings can be imported or exported

Security router

– updating the firmware

– import and export of the router‘s configuration file

– export of the router‘s log file

Ac

tive

co

mp

on

en

ts

B

B.9

Introduction

COM port configuration

Firmware update for a group of devices

The search for

supported devices

Configuring the IE-SWx-M-Wave

Ac

tive

co

mp

on

en

ts

B

B.10

Introduction

An overview of PROFINET and EtherNet/IP components

PROFINET Class A

A great demand for communication exists within machines and

facilities that have a decentralized, modular design. PROFINET

can be used as a communication technology in such a setting.

PROFINET is the open Industrial Ethernet standard from the

PROFIBUS User Organization. It enables corporate-wide

communication and automation. There are two fundamental

functional classes within PROFINET. The first is PROFINET CBA

(Component Based Automation). This is the original version

based on a component model for communicating between

intelligent automation devices (for example programmable logic

controllers or PLCs). The second is PROFINET IO and is used

for decentralized peripherals. This newer technology is designed

for communications between controllers and decentralized field

devices.

EtherNet/IP

EtherNet/IP (Ethernet Industrial Protocol) is an open standard

that was developed by Rockwell Automation and the Open

DeviceNet Vendor Association (ODVA) for industrial networks.

EtherNet/IP is based on the Ethernet TCP/IP standards and the

Common Industrial Protocol (CIP). CIP is an open standard

implemented at the application layer (ISO layer 7). It is used in

ControlNetTM and DeviceNetTM. This enables continuous

communications between the field level and the Internet. The

protocol includes both a control mechanism for cyclic, real-time

I/O signal transmission (implicit messaging) and an information

mechanism for configuration, diagnosis and management

messages (explicit messaging).

Unmanaged Switches Managed Switches Media converter

WaveLine, starting at page B.14 WaveLine, starting at page B.32 Optical media converter, starting at page B.72

ECOLine starting at page B.18 AdvancedLine starting at page B.34

AdvancedLine starting at page B.23 IP67 Switches starting at page B.39

IP67 Switches starting at page B.38

Ac

tive

co

mp

on

en

ts

B

B.11

Introduction

Markers and labels for Industrial Ethernet components

WaveLine WS 15/5 MC BLANK

IP67 ESG 8/13.5/43.3 SAI AU

Cables and lines SF 4.7 – 5.8 mm; 5.8 – 7.0 mm

PrintJet PRO

The PrintJet PRO inkjet printer prints markers for electric

connectivity. These markers can be used for clear equipment

identification on devices, cables and connectors. The labelling

makes servicing, maintenance and troubleshooting much easier.

Water-based ink is used for the black or spot colour printing.

The print is crystal clear and resistant to environmental influences.

The PrintJet PRO prints plastic markers in MultiCard format. In

combination with the user-friendly M-Print® PRO software and

the attached loader, the printer becomes an essential part of

the production.The inkjet process being used, the subsequent

fusing, as well as the printer cartridge and ink have all been

specially adapted by Weidmüller for industrial use. The printer

has excellent long-term use capabilities, thanks to its integrated

loader.

Ordering data PrintJet PROType Order No.

PrintJet PRO 115V 1024050000

PrintJet PRO 230V 1001180001

Accessories

PJ PRO TNTK INK SET BK Ink tank starter set, black 1027090000

PJ PRO TNTK INK SET COL Ink tank starter set, colour 1027110000

PJ PRO TNTK INK K Ink tank Black 1027040000

PJ PRO TNTK INK C Ink tank Cyan 1027050000

PJ PRO TNTK INK M Ink tank Magenta 1027060000

PJ PRO TNTK INK Y Ink tank Yellow 1027070000

PJ PRO TNTK FL Ink tank fluid 1027080000

Ac

tive

co

mp

on

en

ts

B

B.12

Switches without management functions

Unmanaged switches

Switches are the heart of an Industrial Ethernet network

infrastructure

Lack of predictability of the timing behaviour was for a long

time used as an argument against the use of Ethernet in

industrial applications. However, this reasoning was in most

cases based on experience with early network topologies in

which the network users were interconnected via so-called

hubs. A hub forwards all the packets received at one port to

all the other ports. Such networks use the CSMA/CD method

(Carrier Sense Multiple Access with Collision Detect) to specify

who may transmit and when.

In the CSMA method the station wishing to transmit listens

to the channel (carrier sensing) before it transmits data. A

station may transmit only when the transmission medium is

not already being used by another station. If the transmission

medium is in use, the station waits until it is free before sending

its data. Owing to the signal propagation delays, it can never-

theless happen that two devices transmit simultaneously. In

order to avoid a loss of data in a collision case, both transmit ters

must be able to detect the collision (collision detect) and

retransmit their data packets after an arbitrarily selected delay.

CSMA/CD is the customary standard for 10-Mbit networks with

hubs.

Early Ethernet network topologies, some of which are still

in use today, use hubs as standard because the complex

switches produced in the 1980s and early 1990s were very

expensive.

Plug & Play switches – ECO Line and WaveLine

The ECO Line and WaveLine from Weidmüller are cost-effective

ways of gaining a foothold in the world of Industrial Ethernet.

Ongoing adap-tation of our products to new technologies and

the needs of our customers, enables users to set up network

infrastructures for industrial applications simply and quickly.

The ECO Line products require absolutely no configuration and

for many products even the pin assignment of the connecting

cables is flexible thanks to their auto-crossover functionality

(Auto-MDI/X). This means that they can use straight-through

cables for connections between switches and terminal devices

and also for connections between switches, making crossover

cables no longer obligatory.

With its coherent housing design, the impressive WaveLine can

be integrated together with up to eight copper ports and one

optional fibre-optic connection. With an optionally extendable

temperature range – from 0 °C...60 °C to –20 °C...60 °C – the

WaveLine is suitable for a wide range of applications.

Plug & Play switches – AdvancedLine

When the demands are even greater, then we recommend

Weidmüller’s AdvancedLine. In addition to the new features of

the WaveLine, the switches of the AdvancedLine provide further

benefits for applications in tough conditions:

usage range from –40 to 75 °C. This allows their use in rooms

without climate control and operation outside of the normal

temperate zone.

possible in industrial applications. The optional FO ports

ensure trouble-free operation even over long distances

through strong electromagnetic fields and are available in

multimode or singlemode versions.

enables existing units to be exchanged for new ones with

more ports without having to shift all the other components

on the rail or having to extend the switching cabinet

24 ports and two optional FO ports in a compact aluminium

housing.

operation even if the majority of terminal devices connected

may have already shut down

a redundant power supply option, enable quick connection

and disconnection of the power supply when working on

the network

ideal for robust and reliable Industrial Ethernet networks

Refer to Chapter W for a description of the connection

possibilities for redundant power supplies.

Ac

tive

co

mp

on

en

ts

B

B.13


An application example for an unmanaged switch

Production facility

Operator front-end

PLC

CU

CU

CUCU

CU

CU

FO

WaveLine switch

WaveLine switch

AdvancedLine switch

Ordering overview for unmanaged switchesType RJ-45 Multimode SC Multimode SCRJ Multimode ST Multimode LC Singlemode SC Temperature range Order No.

ECO-Line

IE-SW5-ECO-FLAT 5 – – – – – 0 °C … 60 °C 8833790000

IE-SW5-ECO 5 – – – – – 0 °C … 60 °C 8808230000

IE-SW4/1SC-ECO 4 1 – – – – 0 °C … 60 °C 8953080000

IE-SW4/1ST-ECO 4 – – 1 – – 0 °C … 60 °C 8953060000

IE-SW8-ECO 8 – – – – – 0 °C … 60 °C 8829430000

IE-SW6/2SC-ECO 6 2 – – – – 0 °C … 60 °C 8953070000

IE-SW6/2ST-ECO 6 – – 2 – – 0 °C … 60 °C 8953050000

WaveLine

IE-SW3-WAVE 3 – – – – – 0 °C … 60 °C 8897710000

IE-SW3-ETR-WAVE 3 – – – – – –20 °C … 60 °C 8961210000

IE-SW3/1SC-WAVE 3 1 – – – – 0 °C … 60 °C 8896920000

IE-SW3/1SCS20-WAVE 3 – – – – 1 0 °C … 60 °C 8953090000

IE-SW3/1SCS20-ETR-WAVE 3 – – – – 1 –20 °C … 60 °C 8962280000

IE-SW3/1ST-WAVE 3 – – 1 – – 0 °C … 60 °C 8896930000

IE-SW3/1LC-WAVE 3 – – – 1 – 0 °C … 60 °C 8944350000

IE-SW5-WAVE 5 – – – – – 0 °C … 60 °C 8896940000

IE-SW5-ETR-WAVE 5 – – – – – –20 °C … 60 °C 8961220000

IE-SW6/1SC-WAVE 6 1 – – – – 0 °C … 60 °C 8896950000

IE-SW6/1SCS20-WAVE 6 – – – – 1 0 °C … 60 °C 8953100000

IE-SW6/1SCS20-ETR-WAVE 6 – – – – 1 –20 °C … 60 °C 8962290000

IE-SW6/1ST-WAVE 6 – – 1 – – 0 °C … 60 °C 8896960000

IE-SW6/1LC-WAVE 6 – – – 1 – 0 °C … 60 °C 8944360000

IE-SW6/2SC-WAVE 6 2 – – – – 0 °C … 60 °C 8953770000

IE-SW6/2SCRJ-WAVE 6 – 2 – – – 0 °C … 60 °C 8953800000

IE-SW6/2ST-WAVE 6 – – 2 – – 0 °C … 60 °C 8953790000

IE-SW8-WAVE 8 – – – – – 0 °C … 60 °C 8896970000

AdvancedLine

IE-SW6/2SC-ADVANCED 6 2 – – – –40 °C … +75 °C 8942450000

IE-SW6/2SCS-ADVANCED 6 – – – 2 –40 °C … +75 °C 8942470000

IE-SW6/2ST-ADVANCED 6 – 2 – – –40 °C … +75 °C 8942460000

IE-SW8-ADVANCED 8 – – – – –40 °C … +75 °C 8942440000




IE-SW16-ADVANCED 16 – – – – –40 °C … +75 °C 8808270000




IE-SW24-ADVANCED 24 – – – – –40 °C … +75 °C 8808300000

B.14

B

Unmanaged switch, WaveLine, 3-5 ports

129

22.5108

% \ "

Unmanaged switch, WaveLine 3 to 5 ports Ordering data

Number of ports

3 x RJ45

5 x RJ45

Type Order No.

8897710000

8896920000

8953090000

8896930000

8944350000

8896940000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

TS 35

Note:

Ac

tive

co

mp

on

en

ts


Rail assembly

B.15

B

Unmanaged switch,

WaveLine with extended temperature range

129

22,5108

% \ "

WaveLine with extended temperature range Ordering data

Number of ports

3 x RJ45

5 x RJ45

Type Order No.

8961210000

8962280000

8961220000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

TS 35

Note:

Ac

tive

co

mp

on

en

ts


Rail assembly

B.16

B

Unmanaged switch, WaveLine, 6-8 ports

45

129

108

% \ "

Unmanaged switch, WaveLine 6 to 8 ports Ordering data

Number of ports Type Order No.

8896950000

8953100000

8896960000

8944360000

8896970000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

TS 35

Note:

Ac

tive

co

mp

on

en

ts


Rail assembly

B.17

B

Unmanaged switch,

WaveLine with extended temperature range

45

129

108

% \ "

WaveLine with extended temperature range Ordering data


8962290000

8953770000

8953790000

8953780000

8953800000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

TS 35

Note:

Ac

tive

co

mp

on

en

ts


Rail assembly

B.18

B

Unmanaged switch, ECO-Line 5 port flat

1 2 3 4 5

PORTS

12345

2 3 4 51

4EA4

Power

100 Mbps Link

10 Mbps Activity

100 Mbps Activity

10 Mbps Link

Yellow Flashing

Green Solid

Green Flashing

Yellow Solid

Port Indicators

Class 2 Circuits Only

Power

~~0VDCDC

AC

16 mm0.63"

20 mm

84 mm

25 mm89 mm

25.4 mm

TS

-35 D

IN-R

ail

% \ "

Unmanaged switch, ECO-Line 5 port flat Ordering data

Number of ports

5 x RJ45

Type Order No.

8833790000

Accessories

Type Order No.

8813490000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.19

B

Unmanaged switch, ECO-Line 5 port

23 mm

50 mm

70 mm

16 mm

100 mm

25.4 mm

TS

-35 D

IN-R

ail

% \ "

Unmanaged switch, ECO-Line 5 port Ordering data

Number of ports

5 x RJ45

Type Order No.

8808230000

Accessories

Type Order No.

8813490000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.20

B


0.16”4 mm

0.97”25 mm

2.42”61 mm

0.59”15 mm

4.85”123 mm

2.74”70 mm

0.315”8 mm

1.00”26 mm

TS

-35 D

IN-R

ail

% \ "


Note

Ordering data

Number of ports

Note

Type Order No.

8953080000

8953060000

Accessories

Type Order No.

8813490000

Note

Technical data

TS 35

Note:

Ac

tive

co

mp

on

en

ts


B.21

B


25 mm

16 mm

100 mm

98 mm 44.1 mm

TS

-35 D

IN-R

ail

% \ "

Unmanaged switch, ECO-Line 8 port Ordering data


8829430000

Accessories

Type Order No.

8813490000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.22

B


0.16”4 mm

0.97”25 mm

2.57”65 mm

0.59”15 mm

5.15”131 mm

3.79”96 mm

0.315”8 mm

1.61”41 mm

TS

-35 D

IN-R

ail

% \ "


Note

Ordering data

Number of ports

Note

Type Order No.

8953070000

8953050000

Accessories

Type Order No.

8813490000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.23

B

Unmanaged switch, Advanced Line, 8-24 ports

9 mm

.35”

TS

-35 D

IN-R

ail

79 mm

3.1” 156 mm

6.14”

14 mm

.530”

44 mm

1.75”

Allow 3.25” (85 mm)

for Fiber Optic Cable.

% \ "

u

Unmanaged switch, Advanced Line, 8–24 ports Ordering data


8808300000

8942450000

8942470000

8942460000

8942440000

8808280000

8851880000

8808290000

8808270000

8808310000

8851890000

8808320000

Accessories

Type Order No.

8813490000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


Ac

tive

co

mp

on

en

ts

B

B.24

Gigabit switches for network with large volumes of data


Weidmüller‘s new gigabit-capable generation of switches

feature a secure connection in large data-volume

environments.

Gigabit backbones are becoming the standard for industrial

networks. Weidmüller‘s new gigabit-capable generation of

switches enable a secure connection for Fast Ethernet machine

networks to gigabit backbones. The switches feature two

gigabit-capable uplinks suitable for both star and linear

topologies.

Production facility

Workstation

Production facility

Workstation

GBit Backbone GBit Backbone

SFP Transceiver

Fast Ethernet Fast Ethernet

Ordering data

SFP transceiver

1068240000 1068250000 1068270000 1068280000 1068290000 1068310000 1069320000

Part designation IE-SFP-FE-1310-MM IE-SFP-FE-1310-SM20 IE-SFP-FE-1310-SM40 IE-SFP-1G-850-MM IE-SFP-1G-1310-SM10 IE-SFP-1G-1310-SM40 IE-SFP-1G-RJ45-100

Dimensions, mm 13.7 x 56.5 x 8.5 13.7 x 56.5 x 8.5 13.7 x 56.5 x 8.5 13,7 x 56,5 x 8,5 13.7 x 56.5 x 8.5 13.7 x 56.5 x 8.5 13.27 x 70.2 x 8.5

Connector Duplex LC connector Duplex LC connector Duplex LC connector Duplex LC connector Duplex LC connector Duplex LC connector RJ45 connector

Data rate 125Mbit/s 125Mbit/s 125Mbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s

Data transmission 100 Mbit 100 Mbit 100 Mbit 1 Gbit 1 Gbit 1 Gbit 1 Gbit

Wave length 1310 nm 1310 nm 1310 nm 850 nm 1310 nm 1310 nm no

Power supply 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

Range of coverage 2 km 20 km 40 km 550 m at 50/125 μm,

275 m at 62.5/125 μm

10 km 40 km 100 m

Operating temperature –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C –40 °C to +85 °C 0 °C to +70 °C

Cable type Multimode Singlemode Singlemode Multimode Singlemode Singlemode Copper

Wiring type Ethernet 100Base FX Ethernet 100Base FX Ethernet 100Base FX Gigabit Ethernet

at 1.25 Gbps

Gigabit Ethernet

at 1.25 Gbps

Gigabit Ethernet

at 1.25 Gbps

Ethernet 1000Base-T

Here, the two-gigabit SFP (small form-factor pluggable)

slots offer optimal flexibility. Weidmüller offers a wide variety

of pluggable SFP transceivers with LC plugging systems.

These range from single-mode versions with a 2-km range to

multi-mode solutions with a 120-km maximum cable-length

range.

When you are using fibre transceivers, SFPs offer you the

maximum in flexibility.

B.25

B

Unmanaged switch, Advanced Line Gigabit

145 mm

5.7"

156 mm6.14"

13.46 mm.530"

Allow 3.25" (82.55 mm)


44 mm

1.75"

% \ "

Unmanaged switch, Advanced Line Gigabit Ordering data


8961230000

8966140000

8975450000

Accessories

Type Order No.

8813490000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


Ac

tive

co

mp

on

en

ts

B

B.26

Switches with management functions

Introduction Managed switches

Production facility

CU

Production facility

Production facility

Production facility

Trunking

Slave Slave

SlaveSlave Master Master

RapidRing™ID:2

RapidRing™ID:1

FOFO

The decentralised structure of industrial networks means that

many applications require a central switch in the switching

cabinet. A Weidmüller IE-SWxx-M high-performance Industrial

Ethernet managed switch is ideal for such applications.

The AdvancedLine managed switches are enclosed in a strong

aluminium housing. Connections are available for power supply,

relay contact and signalling contacts. The device also features

optionally 8, 16, or 24 Ethernet ports. Up to two of these are

fibre-optic ports for single-mode or multi-mode cable.

The WaveLine managed switches feature up to eight ports in a

very small space enclosed in a compact plastic housing. They are

available with or without I/Os.

LEDs on the front provide the necessary optical indications. The

port LEDs remain permanently on to indicate a connection and

flash during data transmissions. Furthermore, they change colour

to indicate the data rate: green indicates 100 Mbps and yellow

10 Mbps. The green “Power” LED remains on permanently to

indicate a constant power supply. The green “Status” LED is

normally permanently green, but switches to red to signal a fault,

provided the “Link monitoring” function is active.

Weidmüller’s managed switches enable industry networks to be

optimally structured for handling transport routes and network

traffic throughput. The individual network components are

interconnected in a hierarchical, physical star-type network.

The main distributor, in this case a high-performance Industrial

Ethernet switch, represents the central switching point in this

network.

All switches from Weidmüller are protocol-transparent. Every port

forms its own network segment, its own collision domain. The entire

network bandwidth is available to each one of these segments. This

increases not only the network performance across the entire

network, but also in every individual segment. The switch examines

every incoming packet for the MAC address of the destination

segment and can then forward it directly to its destination.

The great advantage of Weidmüller switches is their ability to

interconnect their ports directly.

Port-Trunking

Port-Trunking enables users to combine two or more ports on two

Ethernet devices to form a group. This group then behaves like a

“single logical link”, but with a correspondingly higher data rate.

Furthermore, port trunking provides redundancies with a very fast

Ac

tive

co

mp

on

en

ts

B

B.27


VLAN 1 CU

FO

VLAN 2

recovery time. If a link in the trunk group fails, the remaining links

take over immediately in order to maintain the data exchange

between the two switches.

Port-Mirroring

Port mirroring enables users to mirror – in other words copy –

at one port all the data transmitted or received at one or more,

other ports of the Managed Switches. The messages sent to the

mirrored port can be filtered, e.g. by way of MAC addresses.

VLAN

The abbreviation VLAN stands for “Virtual Local Area Network”.

This is a network structure with all the properties of a conventional

LAN, but without any physical connections. VLANs are generally

switched networks that can link more remote nodes to form a

virtual local network. The VLAN function enables a network to be

split into various segments. It is possible to combine servers and

workstations into dynamic workgroups according to their function.

VLANs can be set up transparently and without any physical

changes to the network and can be configured like multiple virtual

local networks.

VLANs are broadcast domains that can also extend over several

switches. The broadcast traffic is then only visible in the respective

VLAN. This possibility of completely isolating VLANs from one

another helps to increase the security of data transmissions.

Consequently, the data is sent only to the Ethernet devices within

one VLAN group. Once the VLAN function has been activated, a

VLAN frame can be sent only to one port belonging to this VLAN

within the VLAN. If the destination port belongs to a different VLAN,

the frame is deleted. It is also possible to assign a port to several

VLANs simultaneously. This type of structure enables networks to

share one router or server.

VLANs combine the advantages of bridges and routers.

Consequently, it is easy to add, delete or modify a station.

Furthermore, the network can have any structure. For example, it is

possible to set up virtual user groups. It is no longer

necessary to assign users to various subnetworks just because

of the great physical distances between them. Servers housed in

central locations can be assigned to distant workgroups.

IE-SWxx-M switches support two types of VLAN:

Managed switches also permit static entries in addition to the

“learning” of addresses in the forwarding table or the address

table. These entries remain in the table permanently and are not

subject to the aging process.

Ac

tive

co

mp

on

en

ts

B

B.28


IGMP Snooping groups

CU

Operator front-end

PLC

I/O

I/O

CU

CU

CU

CU

Quality of Service

The Quality of Service (QoS) function permits a QoS priority to

be used in every Ethernet frame. The priority depends on the

port from which the frame originates.

Differential relay

The AdvancedLine managed switches also feature a relay

connection. This can be used to monitor individual events on the

network. The relay can signal an outage or the presence of a link

on one or multiple ports.

Browse Address Table

The “browse address table” function enables the display of the

entire address table or the localisation of a MAC address. Select

the type of search (sequence or MAC address) and afterwards the

“find” function. This function is useful for obtaining an overview of

all MAC addresses. The ports belonging to the MAC addresses

are also displayed.

SNMP-Management

The SNMP protocol enables the monitoring, controlling and

administration of networks. According to the model of SNMP

architecture, the network is divided into network management

stations and network components. The network management

stations host applications for the monitor and control of network

components.

IGMP-Snooping

IGMP snooping controls the switch when join requests appear on

the port for a multicast group. When this happens, the particular

port is incorporated into the forward table for this group. This

reduces the net load, since the switch does not flood all ports with

multicast traffic.

DHCP Client

Specially-configured servers, such as Weidmüller‘s Router Series,

can assign dynamic IP addresses and other network parameters

to network components. This is done with the DHCP protocol

(Dynamic Host Configuration Protocol). Our managed switches

can either receive a fixed, static IP address, or a DHCP server can

assign them an IP address.

Diffserv

When using Diffserv (Differentiated Services), every IP packet is

tested to determine its priority. In contrast to the Quality of Service,

the priority is already determined here by the sender. Thus the

path to the receiver is optimized and forwarded with preference.

Ac

tive

co

mp

on

en

ts

B

B.29


Our WaveLine switches come optionally with two digital IOs (input

and output). After the IOs are configured, network parameters can

be monitored with the managed switch. An uninterruptible power

supply (UPS) can also be connected to the IOs. If the supply

voltage fails, the switch changes over to the battery on the UPS.

The signal output wired to the WaveLine managed switch can

issue an SNMP trap to a Scada system running on a network

server. In addition, the IO output activates an alarm light on the

outside of the electrical cabinet so that the power outage can be

easily seen. No PLC is required.

WaveLine managed switches with IOs

Uninterruptible

power supply

SNMP Trap

Digital

Input

Digital

Output

Production facility

Alarm light

Production facility

Ac

tive

co

mp

on

en

ts

B

B.30


Redundancy in the Industrial Ethernet

Two schemes have become established for achieving network

redundancy in Industrial Ethernet applications.

Ring topology is the simplest and quickest way of achieving net-

work redundancy. The lack of a standard led to the development

of RapidRing™ technology. This provides industrial automation

engineers with a simple and effective way of achieving redun-

dancy. RapidRing™ provides redundancy against a single fault.

The devices combined to form a ring are wired like a real logical

ring. As the ring structure would lead to a loop in the network,

one link is logically deactivated (backup link).

The IEEE standard “Rapid Spanning Tree Protocol” (RSTP,

IEEE 802.3w) is the other option for achieving redundancy in

a network. RSTP renders possible a net-like structure which

enables multiple redundancy to be achieved. RSTP is not as

easy to use as RapidRing™, but RSTP does offer many

interesting options.

Both systems have their advantages in particular applications.

In industrial automation it is often very simple to wire ring

structures. Operating RSTP in a ring of 15 or more switches

will lead to unsatisfactory data rates. But the use of RapidRing™

in such an installation results in switching times < 300 ms, and

larger rings are also possible.

RapidRing™ is easy to use. Firstly, one switch is selected to be

the master and is configured as such. The other switches in the

network are configured as slaves. Ports 1 and 2 are always

used to connect the ring. Port 1 of one switch is connected to

port 2 of the next switch in the redundant ring. This connection

scheme leads to a logical ring. After switching on the network,

the network is ready for operation.

The backup link is always connected to port 2 of the master

switch, which allows the backup links to be predefined. The

master can therefore be chosen to optimise the network

throughput. If a connection in the ring is interrupted, the backup

link takes over its function and so communications are not

subjected to long interruptions. Once the defective link has

been restored, the backup link is automatically deactivated.

The status of the ring can be interrogated via the Web server

of every switch involved. MIB data is made available via the

SNMP for remote interrogation and automatic processing in

a dedicated section.

The RSTP standard is a further development of the Spanning

Tree Protocol (STP, IEEE 802.1D). The RSTP configures the

network in such a way that there are no loops. Various redun-

dant connections (backup links) offer multiple redundancy. The

switches connected to the RSTP exchange information via the

network in Bridge Protocol Data Units (BPDU). An interrupted

link is therefore quickly replaced. Modifications within the

network are detected automatically.

RSTP is ideal for complex networks with more than one connec-

tion. As several possible paths exist in the network, RSTP must

always analyse the network fully. That leads to switchover times

> 300 ms. Indeed, in large and complex networks the switchover

time can run into several seconds.

A network with RSTP should be very carefully planned and

conceived, otherwise unexpected behaviour could be the result.

Ac

tive

co

mp

on

en

ts

B

B.31


Configuration

IE-SWxx-M managed switches can be configured with a terminal

program but also via a Web interface at the integral, interactive

Web server. Every Internet-compatible PC in the local network

can have access to this Web server. The Web server is compa-

tible with the latest versions of Internet Explorer (7.0 or higher)

and Firefox (3 or higher). This method of confi guration enables

remote switches to be configured.

The following settings are possible:

or disabled

SNMP traps are messages that are transmitted when a “trap

event” occurs. Up to four trap receivers can be specified. The

IE-SWxx-M switches support traps for the link-up, link-down,

confirmation error, cold restart and warm restart functions.



The IE-SWxx-M managed switches can be monitored via SNMP

and console menus. The following are just some of the functions

available:

Port error packets statistics can be generated for every port.

This contains information regarding:

B.32

B

WaveLine Managed Switches

45

129

108

% \ " u

WaveLine Managed Switches

Note

Ordering data

Number of ports

Note

Type Order No.

8943790000

1067880000

8943800000

8943820000

8943810000

8943780000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.33

B

WaveLine managed switch IOs

45

129

108

% \ " u

WaveLine managed switch IOs

Note

Ordering data

Number of ports

Note

Type Order No.

8972580000

1067870000

8972600000

8972590000

8972570000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.34

B

Managed switch, with 8 to 24 ports

9 mm

.35”

TS

-35 D

IN-R

ail

79 mm

3.1” 156 mm

6.14”

14 mm

.530”

Allow 3.25” (85 mm)


% \ "

u

Managed switch, with 8 to 24 ports Ordering data


8845840000

8851850000

8845850000

8845740000

8845780000

8851860000

8845790000

8845800000

8845810000

8851870000

8845820000

8845830000

Accessories

Type Order No.

8813490000

8866660000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.35

B

Ac

tive

co

mp

on

en

ts

Ac

tive

co

mp

on

en

ts

B

B.36

IP67 switches

8-port switch in IP67

Switches are the central components of a network. They prevent

data collision, allow rapid packet switching and enhance data

throughput. Not only do Weidmüller switches meet the demands

placed on the Fast Ethernet with its transmission rate of up

to 100 Mbit/s, but they are also downward compatible with

the older networks that have a transmission rate of 10 Mbit/s

(IEEE 802.3). They recognise the speed automatically.

Weidmüller’s unmanaged switches are Plug & Play devices for

easy installation of Ethernet networks. They do not need to be

either configured or parameterised.

Weidmüller’s managed switches enable industry networks to

be structured in order to optimise transport routes and times

for network traffic. The various network components are cabled

together hierarchically in a physical star. The main distributor in

the field, in this case the Industrial Ethernet switch

IE-SW-8-M-IP67, is the central switching point. All Weidmüller

switches are protocol transparent. Each port forms both a

network segment and a collision domain that are intrinsic to the

port itself. The entire network bandwidth is available to each of

these segments. This results in enhanced network performance

not only over the network as a whole, but also in each individual

segment. The switch examines each packet passing through for

the MAC address of the target segment and is able to forward

it directly there.

Just 54 mm wide

One LED per port for link /

speed / data

Fault relay:

1 x M12 A-coded, 5-pole (24 V DC / 1 A)

Two MultiCard markers or

one long 40-mm marker

for labelling the IP address

2-hole mounting and

functional earth terminal

8 x M12 D-coded, 4-pole

Serial interface (RS232):

1 x M12 B-coded, 5-pole

Redundant voltage supply

2 x M12 A-coded, 5-pole

Ac

tive

co

mp

on

en

ts

B

B.37

IP67 switches

For direct connection to the network in the field, Weidmüller

offers an IP 67 switch with eight Ethernet ports for use in tough

environments.

in the field, complying with UL94 flammability rating V0

The features of the managed IP67 switch from Weidmüller

include the following:

Stock control with the Weidmüller Industrial Ethernet Switches in IP67

RapidRing™

Dispatching station 2

Dispatching station 4

Stock

Dispatching station 1 Dispatching station 3

Managed Switch

Managed SwitchManaged Switch

Unmanaged Switch

B.38

B

IP 67 unmanaged switch

210

2015

54

30,7

5

42

% \ "

IP 67 unmanaged switch Ordering data


8877190000

Accessories

Type Order No.

2330260000

1912130000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts

IP 67 switches

B.39

B

IP 67 managed switch

210

2015

54

30,7

5

42

% \ "

IP 67 managed switch Ordering data


8877200000

Accessories

Type Order No.

2330260000

8874290000

1912130000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts

IP 67 switches

Ac

tive

co

mp

on

en

ts

B

B.40

Decentralised I/O remotes

The EtherNet/IP system

Max. bus extension (m) Data rate (Mbps)

100 10

100 100

Principle

EtherNet/IP (Ethernet Industrial Protocol) is an open standard

that was developed by Rockwell Automation and the Open

DeviceNet Vendor Association (ODVA) for industrial networks.

EtherNet/IP is based on the Ethernet TCP/IP standards and

the Common Industrial Protocol (CIP).

CIP an open standard that is implemented in ISO layer 7, and

is also used for ControlNet™ and DeviceNet™ installations.

This enables continuous communications between the field

level and the Internet. The protocol includes a control

component for cyclic, real-time-compatible I/O signal

transmission (implicit messaging) and an information

component for the configuration, diagnosis and management

messages (explicit messaging).

The I/O data uses the User Datagram Protocol/Internet Protocol

(UDP/IP) and the information data uses TCP/IP protocols.

The IEEE802.3 standard is incremented on layers 1 and 2

(physical media and data link respectively).

Addressing

The Dynamic Host Configuration Protocol (DHCP) is used to

assign addresses to modules in EtherNet/IP networks.

Network structure

Like Standard Ethernet, EtherNet/IP installations are also wired

with a star structure. The star structure is characterised by a

central signal distributor (switch) with individual connections to

all the network’s terminals. A line or tree structure can be set up

with the help of a 3-port switch in the device or in the proximity

of each device.

Weidmüller can supply products for the network infrastructure –

please refer to our Industrial Ethernet catalogue.

Transmission rate

The transmission rate is 10 or 100 Mbps. Weidmüller modules

detect the transmission rate automatically and set themselves

accordingly. The maximum length of the bus cable is the same

for both transmission rates.

The following table can serve as a guide for bus installations

complying with the standard:

Ac

tive

co

mp

on

en

ts

B

B.41


EtherNet/IP Universal

Ordering data

IO variants

16 digital inputs

16 digital inputs / 8 digital outputs

4 analogue inputs / 2 analogue outputs / 4 digital inputs

Information

Type Qty. Order No.

SAI-AU M8 EIP 16DI 1 1906930000

SAI-AU M8 EIP 16DI/8DO 1 1906940000

Technical data bus system

Bus sharing unit Server

Transmission rate 10 / 100 Mbps

Diagnostic display red

Fieldbus interface IEEE 802.3

Electrical isolation available yes

Station addresses via DHCP

bps rate automatic

Technical data

General data

Insulation material of housing PBT

Flammability class UL 94 V-0

Operation temperature 0 °C ... 55 °C

Storage temperature -25 °C ... 70 °C

Ingress protection class IP 67

Electrical data electronics-module

Operating voltage 24,0 V DC (18...30 V)

Max. current carrying capacity per output signal 0,5, 2,0 A

Output levels Short-circuit-protected

Total current. max. 8 A

Digital inputs TYPE1 to EN61131-2

Analogue outputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA

Analogue inputs -10...+10 V, 0...+10 V, 0...20 mA, 4...20 mA

Resolution 12 Bit

Accuracy < 0,2 %

Information UL certification in preparation

Accessories

Plug

Metal plug Ethernet, pin M12, D-coded, straight

Metal plug Ethernet, socket M12, D-coded, straight

Miscellaneous accessories

Marker, transparent

M8 protective cap

M12 protective cap

Type Qty. Order No.

SAISM-4/8S-M12-4P D-COD 1 1892120000

SAIBM-4/8S-M12-4P D-COD 1 1892130000

ESG 8/13.5/43.3 SAI AU 5 1912130000

SAI-SK M8 50 1802760000

SAI-SK-M12-UNI 20 2330260000

Information Voltage supply with standard M12 plug-in connectors (see catalogue)

M8

SAI-AU SAI-AU

M12

Type Qty. Order No.

SAI-AU M12 EIP 16DI 1 1906900000

SAI-AU M12 EIP 16DI/8DO 1 1906910000

SAI-AU M12 EIP AI/AO/DI 1 1906920000

Ac

tive

co

mp

on

en

ts

B

B.42


Modbus TCP

Max. bus extension (m) Data rate (Mbps)

100 10

100 100

Principle

Modbus TCP is a fieldbus system for automation technology

based on Ethernet TCP/IP. It has been accepted by the Internet

Engineering Task Force (IETF) as a draft RFC standard and has

been made available for all to use by Schneider Automation.

Modbus TCP is based on Modbus, a well established industrial

application protocol. The Modbus object models remain

unchanged.

A connection is set up via TCP/IP by the server (e.g. I/O

device) being addressed via port number 502. Commands are

initiated by the client (Master) and executed by the server (slave).

The length of a Modbus telegram is max. 256 bytes.

Network structure

Like Standard Ethernet, Modbus TCP installations are also wired

with a star structure. The star structure is characterized by a

central signal distributor (switch) with individual connections to

all the network’s terminals. A line or tree structure can be set up

with the help of a 3-port switch in the device or in the proximity

of each device.

Weidmüller can supply products for the network infrastructure –

please refer to our Industrial Ethernet catalogue.

Addressing

The addressing is carried out via a BOOTP (Internet Bootstrap

Protocol) inquiry via the client, using the Dynamic Host

Configuration Protocol (DHCP), or the user can set the IP

address with a software tool.

Bus extension/transmission rate

The transmission rate is 10 or 100 Mbps. Weidmüller modules

detect the transmission rate automatically and set themselves

accordingly. The maximum length of the bus cable is the same

for both transmission rates.

The following table can serve as a guide for bus installations

complying with the standard:

Ac

tive

co

mp

on

en

ts

B

B.43


Modbus TCP Universal

Ordering data

IO variants

16 digital inputs



Information

Type Qty. Order No.

SAI-AU M8 IE 16DI 1 1906880000

SAI-AU M8 IE 16DI/8DO 1 1906890000



Transmission rate 10 / 100 Mbps





bps rate automatic

Technical data

General data














Resolution 12 Bit

Accuracy < 0,2 %


Accessories

Plug




Marker, transparent

M8 protective cap

M12 protective cap

Type Qty. Order No.

SAISM-4/8S-M12-4P D-COD 1 1892120000

SAIBM-4/8S-M12-4P D-COD 1 1892130000

ESG 8/13.5/43.3 SAI AU 5 1912130000

SAI-SK M8 50 1802760000

SAI-SK-M12-UNI 20 2330260000

Information Voltage supply with standard M12 plug-in connectors (see catalogue)

M8

SAI-AU SAI-AU

M12

Type Qty. Order No.

SAI-AU M12 IE 16DI 1 1906850000

SAI-AU M12 IE 16DI/8DO 1 1906860000

SAI-AU M12 IE AI/AO/DI 1 1906870000

Ac

tive

co

mp

on

en

ts

B

B.44


Principal function

PROFINET is the open Industrial Ethernet standard for

automation from PROFIBUS & PROFINET International (PI).

Profinet implements TCP/IP and IT standards. It is capable of

real-time Ethernet and can integrate fieldbus systems.

The Profinet design is distinguished mainly by the type of data

exchange used to meet the speed requirements.

The are two Profinet perspectives – Profinet-CBA and

Profinet-IO:

component-based communications via TCP/IP and real-time

communications for the real-time demands of modular systems

engineering. Both communication channels can be used in

parallel.

synchronous communication (IRT: isynchronous real-time)

with decentralized peripheral devices. The designations RT

and IRT only describe the real-time characteristics of the

communication within the Profinet-IO.

Process data and alarms within the Profinet-IO are always

transmitted in real time (RT). Profinet „real time“ is based on the

definition from the IEEE and IEC. This specifies that only a

limited time is allowed within a bus cycle for the execution of

real-time services.

This RT communication is the basis for Profinet-IO data

exchange. Real-time data is handled with a higher priority than

TCP(UDP)/IP data packets. RT is the foundation for real-time

communications in the decentralized peripheral zone. Bus cycle

times in the 2–6 ms range are possible with this data exchange

mechanism.

Addressing

Module addresses for the Profinet-IO are assigned automatically

using DCP (the discovery configuration protocol).

Network structure

With the integration of a managed, two-port switch in all Profinet

modules, it is then possible to implement linear, star or tree

network topologies.

Transmission rate

The transmission rate is 100 Mbit/s. The maximum segment

length is 100 m.

PROFINET system description

Ac

tive

co

mp

on

en

ts

B

B.45


PROFINET Universal

Ordering data

IO variants

16 digital inputs



Information

Type Qty. Order No.

SAI-AU M8 PN 16DIM 1 1019310000

SAI-AU M8 PN 16DI/8DOM 1 1019320000



Transmission rate 100 Mbps





bps rate automatic

Technical data

General data








Max. current carrying capacity per output signal 2,0 A






Resolution 12 Bit

Accuracy < 0,2 %

Information

Accessories

Plug




Marker, transparent

M8 protective cap

M12 protective cap

Type Qty. Order No.

SAISM-4/8S-M12-4P D-COD 1 1892120000

SAIBM-4/8S-M12-4P D-COD 1 1892130000

ESG 8/13.5/43.3 SAI AU 5 1912130000

SAI-SK M8 50 1802760000

SAI-SK-M12-UNI 20 2330260000

Information

M8

SAI-AU SAI-AU

M12

Type Qty. Order No.

SAI-AU M12 PN 16DIM 1 1019270000

SAI-AU M12 PN 16DI/8DOM 1 1019280000

SAI-AU M12PN4/2AIO4DIOM 1 1019290000

Ac

tive

co

mp

on

en

ts

B

B.46

Security Router

Routers – the gateways between Ethernet worlds

Suppose that you are at your place of work in Stuttgart and

need to compare the indicator data sets coming from your

manufacturing sites in the Middle East. You then dial in,

download the data, save it on your password-protected system

and then you‘re ready. But how can you be sure that you are the

only person who is currently accessing this data? Information

transmitted over the Internet is just as safe as a message in a

bottle.

Anyone with a bit of know-how can capture this data and you

may never have the slightest clue of this abuse.Damages

resulting from spying, sabotage and other abuse of sensitive

data have already reached unprecedented levels. Should we

then avoid using public networks all together for industrial

uses?We at Weidmüller have worked on this problem in depth.

We have developed a new technology that provides smart and

reliable defence against external dangers.We have created a

new data communication path which establishes a new level of

security, reliability and user-friendliness.

The two typical applications for routers are:

to simplify configuration

Separation of Ethernet networks in the factory

An industrial manufacturing network or an industrial machine

network and a typical office network use the same Ethernet

standard but are nevertheless totally different. Whereas in the

office network larger volumes of data and the associated

sluggishness of the network is completely acceptable, an

excessively long response time in an industrial network can lead

to downtimes and malfunctions. Complete isolation of the two

networks is inadvisable, and for the first time there is the chance

of using the same network for all procedures in the company.

Procedures become more transparent, the management and

technical workloads can be reduced. The exchange of data is

considerably simplified and decidedly more efficient.

There are many options for isolating and prioritising network

data, e.g. VLAN, QoS for layer 2, etc. A router can provide an

option for filtering the data on the IP layer (layer 3). Features

such as integral firewall, Network Address Translation (NAT),

Port Address Translation (PAT) and remote access via a

modem turn such a router into an efficient aid for achieving

separation between networks.

Only authorised users can access the protected network from

outside and only certain, enabled devices can transmit data

out of the protected network. The NAT/PAT feature enables a

machine with its own IP subnetwork and several network users

to remain concealed from the outside world behind a unique IP

address. Access routines to the IP address from outside are

automatically forwarded to a predefined IP address in the

network behind the router. In this way the device can remain

accessible from outside but only as required. The option of

concealing a complete machine behind an IP address reduces

the installation and management workloads for the machine

user.

In addition, the router can be selected via an external modem,

thus enabling access to the router and the machine beyond,

without compromising the corporate network. Such access

routines are carried out via PPP and PAP or Callback with

Virtual Private Network (VPN). This means that a high security

level can always be guaranteed.

Ac

tive

co

mp

on

en

ts

B

B.47

Security Router

One for all -

The Weidmüller „Configurator“ Device Management Tool

Managing the firmware updates or backing up configurations

for a variety of different devices can be a problematic and slow

undertaking. Device manufacturers offer different utilities for

their different product lines, and these often have differing user

interfaces.

In order to solve this problem, Weidmüller has introduced the

„Configurator“ device management tool. It serves as a general

foundation for managing and configuring WaveLine routers and

a variety of other devices.

To briefly summarize, the Configurator enables:

datasheets

The Configurator is available for Windows and Linux. It

requires no installation. The software can simply be unpacked

and started. The only system requirement is that you have Java

Runtime, version 1.5 or later, installed.

The configurator organizes data into projects. A project can

consist of multiple locations which can represent the structure of

the current facility structure or differing workshops. The software

also enables devices to be grouped together in logical groups.

You can represent these groups in a logical structure, with

classifications such as „All border routers from manufacturing

units“. The Configurator presents a shared „look and feel“ for the

central management of firmware and configurations. It can be

used for a large number of the industrial Ethernet products from

Weidmüller. The administrator can then focus on the complete

management of the network. He must no longer be worried

about the particulars for each individual tool.



Ac

tive

co

mp

on

en

ts

B

B.48

Security Router

Routers – gateways between Ethernet worldsWe Bring Top-level Security to the Net

Industrial networks and office networks run on the same

Ethernet standards, and yet they are totally different:

while large amounts of data and, as a result, a certain

“inertia” of the network are totally acceptable in office

networks, excessive response times may lead to stalling,

errors, hence to the generation of considerable costs, in

industrial networks.

Communication networks used for office applications and for

automation are converging. The advantages that result from this

process are put into practice more and more frequently because

they make procedures more transparent and facilitate data

exchange substantially.

Weidmüller Industrial Routers ensure that different networks

interoperate in unison and with top-level security.

Customer’s Network

Router Configurator: remote access from around the

world to your router for maintenance and support

To customize the routers in order to get the optimum out of

them, you can choose to tailor them exactly to your needs via

a web browser, via SNMP, or using Weidmüller’s management

software called “Configurator.”

The “Configurator” allows reliable remote maintenance of your

systems around the world. Updating the software on a full set

of routers, supporting and managing their performance is done

conveniently and securely from your office.

The Security Datasheet

... assists you with the configuration. It describes the way the

firewall has to behave to ensure that the connected systems

can work normally. You no longer need to worry about technical

details, such as ports. The configuration software does this job

for you. A few mouse clicks is all it takes to have your firewall

ready for operation.

Intelligent Firewall: Stateful Package Inspection

Our routers ship with firewalls that adapt automatically to the

network traffic they see (Stateful Package Inspection). They

recognize the messages that are stateful, i.e., legitimized,

and let them pass. Unidentified packets are kept out of your

industrial networks.

Private Network 192.168.1.0



Production System in a

Protected Industrial Network





WWW.

Firewall

Firewall

Firewall

Ac

tive

co

mp

on

en

ts

B

B.49

Security Router

Bodily Search at the Point of Entry:IPsec Encryption for Virtual Private Networks (VPN)

To frustrate eavesdroppers,

the router transmits your data encrypted.

Weidmüller Routers for VPNs enable access to components

from around the world with IPSec-encrypted procedures, thus

ensuring top-level security with minimum effort.

Pathfinder on the net: OSPF (Open Shortest Path First)

OSPF is the dynamic routing protocol within a system that

describes the status of the gateways connecting to data

networks. The salient feature of the protocol is its rapid and

dynamic response to changes in the network structure.

Customer’s Network www Firewall Production System

Port forwarding, NAT, and masquerading

The router is capable of translating addresses between

networks. That’s how, for instance, all devices of one system

can be masqueraded behind a single router. Someone attacking

over the network (e.g., the internet) can see only the router,

while all the devices behind it are hidden from the outside world

to protect them.

Weidmüller’s innovative router technologies are there to avoid

that your data have “queue up.” OSPF is the reliable and

timesaving web guide that takes your data to their destination

in the most efficient way at any moment.

Private Industrial Network Public Network Customer’s Network Private Industrial Network

192.168.1.0 10.1.94.0 192.168.1.0

www Customer’s

Network

VPN: private, IPSec-encrypted

communication tunnel

Firewall

Production System

Ac

tive

co

mp

on

en

ts

B

B.50

Security Router

Virtual Mapping with Weidmüller’s Router

Additional Features for Convenient Data Communications

Virtual mapping—or, NAT—enables you to operate simultaneously

several identically configured networks behind routers equipped

with NAT capabilities. The system engineer can hide the system

behind the router and needs not adjust its IP configuration. This

Modem

Weidmüller Routers support modem connections for dial up

connections to the router. This feature is extremely valuable

for remote maintenance in situations where a direct connection

of the network to the internet is undesired. Different types

with built-in Analog-, ISDN- or GSM-modem are available,

alternatively an external modem can be connected.

Highspeed Routing

Based on his high performance architecture the Router is able

to forward data with nearly wire speed (100 Mbit/s). This is an

important feature for high speed applications and applications

with large data volumes.

The advantage of virtual mapping:

Two or more machine networks with the same configuration

can be connected to a superordinated network without any

changes.

allows using the system with the same configuration over and

over again. NAT is required as an alternative to port suffixes

Integrated Servers

The router provides additional network functionalities that

normally require a separate computer, for example automatic

addressing and automatic time serving and synchronization.

Dial on Demand and Callback

When a router is used to connect a network to the internet over

a modem, Dial on Demand comes in handy to cut costs. In this

configuration the router establishes a connection only when a

device in the network wants to download data from the internet.

When it is done, the router disconnects automatically.

Callback is often used for remote maintenance purposes. The

router dials a preset phone number, e.g., that of the system

manufacturer‘s service center. This means that the dial-up costs

are borne by the customer.

Production System 1

Production System 2

Office

Ac

tive

co

mp

on

en

ts

B

B.51

Security Router

Port forwarding enables the exchange of IP packets between target addresses and ports.

LAN 1 LAN 2

Dropped

Firewall

192.168.1.100

192.168.1.100:5011

192.168.2.11:5011

192.168.2.12:80

192.168.2.13

192.168.1.100:5012

1

2

Target addresses and ports for the IP packets are exchanged

IP addresses: Assigned IP addresses:

router ports on Ethernet 1 ports in LAN 2

192.168.1.100

192.168.1.101:5011 192.168.2.11:5011

192.168.1.102:5012 192.168.2.12:80

Port forwarding with Weidmüller‘s Router

– Combining the IP address of a router interface with any

virtual port,

– Assigning an IP address / port combination to an actually-

available IP address and port from the other network

(connected via the router)

then immediately forwarded to the assigned IP addresses.

router to the requesting agent.

Ac

tive

co

mp

on

en

ts

B

B.52

Security Router

Virtual Mapping – NAT

Type Network Address Translations (NAT), exact destination

NAT = DNAT target address of the IP packet is exchanged

IP addresses of the router Assigned IP address

on Ethernet in LAN 2

192.168.1.100

192.168.1.101 192.168.2.11

192.168.1.102 192.168.2.12

LAN 1 LAN 2

Dropped

Firewall

192.168.1.100

192.168.1.101

192.168.2.11

192.168.2.12

192.168.2.13

192.168.1.102

1

2

Ac

tive

co

mp

on

en

ts

B

B.53

Security Router

Virtual mapping with the Weidmüller miniRouter

– Allocation of additional IP addresses to a network interface,

– IP addresses must all come from the same network as the

actual router IP address on the selected network interface,

– Allocation of additional IP addresses to an actually-available

IP address from another network

(connected via the router)

immediately forwarded to the assigned IP addresses

the router to the requesting agent

The advantages of virtual mapping:

– enables parallel operation of multiple identically-configured

networks behind NAT-technology routers

– Machine builders can hide machines behind a router

without needing to change the IP configuration,

– It is possible to always use the machines with the

identical configuration

– NAT as an alternative to port forwarding; necessary for

applications which can not form requests combining IP

addresses with port numbers (for example, some PLC

applications)

1

2

1

2

Advantage of virtual mapping:two identical production networks connected to one office network

Dropped

192.168.1.200

192.168.1.201

Manufacture 2

192.168.2.11

192.168.2.12

Manufacture 1

192.168.2.11

192.168.2.12

Office

192.168.1.40

192.168.1.43

192.168.1.202

192.168.1.100

192.168.1.101192.168.1.102

Ac

tive

co

mp

on

en

ts

B

B.54

WaveLine router with digital IOs

Security Router

Our line of WaveLine routers are optionally available with digital

IOs. By means of digital inputs direct on the router, a service

request (for example) can be triggered directly by the machine

operator. The user can now switch the digital IOs with the press

of a button. The router can then dial up to the Internet if

necessary to deliver the alert.

It is also possible to use the digital input to completely lock the

WLAN port. With just the press of a button you can deactivate

all traffic with networks located behind the router. The required

parameters can be set using our Weidmüller Device

Configurator or using the web interface to the router

configuration.

HMI

Camera

Customer net

(WAN) Digital Input

Service request

Lock WAN

PLC

B.55

B

Wave 100T

45

129

108

% \ "

Wave 100T Ordering data

Number of ports

2x RJ45, 2x DI/DO, 1x USB, 1x RS232



Type Order No.

IE-AR-100T-WAVE 8943830000

IE-AR-100T-AN-WAVE 8943850000

IE-AR-100T-ISDN-WAVE 8943840000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

5 W

TS 35

IP 20

Note:

Ac

tive

co

mp

on

en

ts

Security router

Ac

tive

co

mp

on

en

ts

B

B.56

Industrial Wireless

The GPRS alarm module

The IE-GPRS-I/O is a suitable choice for all those who wish to

access facility or plant data from mobile devices or from the

Internet. Some examples are:

facility at any time, even when you are not on site? You can

choose to receive an SMS, a fax or an e-mail

conditions arise in the plant, even when there is nobody on

site? The IE GPRS I/O can automatically send, for example,

to control your plant from virtually anywhere in the world and

allows you round-the-clock access to your plant

is unreachable by land-line or network? The IE-GPRS-I/O can

be installed wherever GSM mobile radio network reception is

are always accessible via a secure Internet link, are another

possible option that would eliminate the need for an expensive

means that you can avoid the installation of a land-line phone

link and the associated transmission costs.

In today‘s production facilities, it is often the case that only a

of your devices to be online all the time. No matter where your

personnel may be, the machine is reachable around the clock.

The IE-GPRS-I/O is also an attractive choice for manufacturers

of machinery and plants. Mobile access to the facility or plant

allows you to provide speedy and effective support to your

personnel of your customers. Often this can save you the

customer relations.

Just like most of our active communication devices, the

cabinet.



Included in delivery:

Ac

tive

co

mp

on

en

ts

B

B.57

Industrial Wireless

measurements.

within the IE-GPRS-I/O, the device can easily be adapted to the

schedules of your service technicians.

module include:

DI 1:

ALARM

the IE-GPRS-I/O ports.

= = 1. 15 A

status of all ports

Password from the

Ac

tive

co

mp

on

en

ts

B

B.58

Industrial Wireless

The Intermediate Server uses simple protocol functions and

makes it possible for IE-GPRS-I/O modules to communicate

with each other. The Intermediate Server enables IE-GPRS-I/Os

are two methods for connection IE-GPRS-I/Os with each other.

recommend, however, that the number of slaves not exceed

module inputs

statistical analysis

username and password

up the communication between the modules.

GPRS Internet

IE-GPRS-I/O Slave IE-GPRS-I/O Master

SAI Gateway

VServer

LAN

PC withVServer

PLC

IE-GPRS-I/O Slave

DI 1

DI 2

DI 3

DI 4

DO 1

DO 2

DO 3

DO 4

IE-GPRS-I/O Master

Intermediate Server (VServer)

Ac

tive

co

mp

on

en

ts

B

B.59

Industrial Wireless

the database

IE-GPRS-I/Os with the application. It also ensures that the

data is stored in the database.

IE-GPRS-I/O

CServer Executable

port 10231

IE-GPRS-I/O

MySQL DBMS

port 3306

Apache CServer

port 80

Communication Server (CServer)

Ac

tive

co

mp

on

en

ts

B

B.60

Industrial Wireless

Similarly to the Intermediate Server, all IE-GPRS-I/Os connect

authenticate with their usernames and passwords. They then

access to the database is possible, for example, if you develop

in-house applications for data analysis.

GPRS

Internet

IE-GPRS-I/O 1

IE-GPRS-I/O 2

IE-GPRS-I/O 3

CServer

LAN

PC withVServer

B.61

B

GPRS module

15 mm

.590”

13.5 mm

.530”

156 mm

6.14”

140 mm

5.45” 44 mm

1.75”

11 mm

0.43”

TS

-35 D

IN-R

ail

79 mm

3.1”

Consider sufficient Space for Antenna

or Cable

% \ "

GPRS module Ordering data

Quad Dual band GSM/GPRS modem

900/1800 MHz - 850/1900 MHz

Type Order No.

IE-GPRS-IO-QUAD 8963930000

Standard antenna with 2.5m cable included in delivery

Accessories

Note

Technical data

Housing Aluminium

Length / Width / Height 137 mm / 45 mm / 155 mm

Ports 8 digital inputs; 4 digital outputs; 4 analogue

inputs; 1 x RS 232 interface

AC input voltage, min.-max. 8-24 V AC

DC input voltage, min.-max. 10-36 V DC

Input power AC / DC max. 5 VA AC / max. 5 Watt DC

Input frequency 47 - 63 Hz

Operating temperature, min.-max. -10 °C-55 °C

Storage temperature, min.-max. -10 °C-70 °C

Installation TS 35;wall

Protection class IP 20

Data rate max. 53.6 kb/s

Functionality SMTP; POP3; FTP; DNS; IP TCP; UDP Sockets

Status indication Power, Status, Connection/Activity

Approvals cULus, CE, EN55024, EN 55022, Gost R

Transmission rate GPRS-dependent

Note:

Weidmüller‘s IE-GPRS-I/O-QUAD GPRS alarm module is used for monitoring

facilities and can signal deviations either automatically or upon request.

The alarm module can send out an alarm via SMS, fax or e-mail. It can also

initiate a voice telephone call to eight contact persons.

Weidmüller‘s GPRS-I/O is convincing, with its 45-mm, thin aluminium

housing and the following configurable features:

ports, via SMS, FAX, e-mail or voice

Ac

tive

co

mp

on

en

ts

Industrial Wireless

Ac

tive

co

mp

on

en

ts

B

B.62

Industrial Wireless

WLAN bridge

Weidmüller‘s WaveLine products can also link or extend your

industrial network with WLAN. Currently, wireless LAN can be

used for industrial manufacturing facilities; it is ideal for use

anywhere where traditional cabling is not suitable or where a

wireless connection is required. The WaveLine WLAN bridge is

ideal for gaining a foothold in Industrial Ethernet. It can be used

wherever end terminal devices have to be connected to your

Ethernet in the simplest way possible. The industry-standard

WLAN-BRIDGE-WAVE (with IP20 protection) features a compact

plastic housing (108 mm x 22.5 mm x 127.8 mm L/W/H) and

VO-class flammability. It can be used in temperatures ranging

from 0°C to 60°C. The module supports WLAN IEEE 802.11b/g

standards and can function interference-free in a production

facility. In addition, it features a 10 Base-T/100 Base-TX (copper)

network interface.

As delivered from the factory, the WLAN bridge comes with:

an RS232 interface (not electrically isolated), an RJ45 interface,

and an antenna The WLAN is capable of auto-negotiation and

auto-crossing (RJ45) and has a redundant power supply. The

WLAN bridge comes with a wide range built-in security: optional

end-to-end 128, 192 or 256-bit AES encryption, WPA-PSK/

TKIP*, and alternative 64/128-bit WEP/WPA2 encryption**.The

bridge is configured with a user-friendly, password-protected

interface which is accessible via the serial port or a web-based

interface. In addition, the thin WLAN bridge module can be

fastened to a mounting rail and comes with its own internal web

server. The module supports the following protocols: ARP, UDP,

TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP, SMTP,

TFT. Three LEDs display the operational status: data rate,

power, and connection/activity.

* WPA authentication (Wi-Fi Protected Access) with pre-shared key (PSK - Preshared Key) and with TKIP

encryption (Temporal Key Integrity Protocol) - also known as WPA-PSK/TKIP.

** WEP/WPA2 encryption (Wired Equivalent Privacy)/WI-Fi Protected Access 2. WPA2 is an implementation of the

principle functions described in the IEEE 802.11i security standard.

Ac

tive

co

mp

on

en

ts

B

B.63

Industrial Wireless

The integration of serial or Ethernet-compliant end

devices into an existing wireless LAN

Our WLAN bridge can be integrated into an existing wireless

LAN. The bridge is set to infrastructure mode and registers itself

in the corporate network at the access point.

Mobile remote maintenance enabled by the WLAN bridge

Our WLAN bridge makes it possible for technicians to carry out

remote maintenance and configuration on devices such as the

Siemens S7 PLC. The technician does not need to connect his

PC to the electrical cabinet or directly to the PLC to perform the

maintenance. Instead, he takes advantage of the WLAN bridge

to build a wireless connection to the PLC and carries out the

configuration remotely.

The WLAN bridge then becomes a client. It can integrate

machinery (for example, a forklift) into the network.

WLAN Bridge

WLAN RS232

SPSSiemens S7

MPI- Adapter

B.64

B

WLAN-Bridge

129

22.5108

% \

WLAN bridge Ordering data

Number of ports

1 x RJ45, 1 x RS232, 1 x antenna

Type Order No.

IE-WLAN-BRIDGE-WAVE 8927140000

Accessories

markers

Type Order No.

WS 15/5 MC NEUTRAL 1609880000

Note

Technical data

Housing Plastic

Length / Width / Height 108 mm / 22.5 mm / 127.8 mm

Ports 1x RJ45; 1x RS-232;1x antenna



Input power AC / DC 6 VA AC/4 Watt DC

Operating temperature, min.-max. 0 °C-60 °C


Standard IEEE 802.3; 802.3u; 802.3x

Data rate 1, 2, 5.5, 11 Mbps (802.11b) and 6, 9, 12, 18,

24, 36, 48, 54 Mpbs (802.11g)

Functionality Autonegotiation and Autocrossing (RJ45),

redundant voltage supply

Status indication Data rate, Power, Connection/Activity

Approvals cULus, CE, EN55024, EN 55022

Supported protocols ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP,

BOOTP, Auto IP, HTTP, SMTP, TFT

Network Interface Wireless 802.11b, 802.11g and 10 Base-T/100

Base-TX (copper)

Management Internal web server, SNMP (read only), software,

serial and telnet login

Security WEP 64/128, WPA-PSK, TKIP, AES end-to-end

encryption

Note:

WaveLine products can also link or extend your industrial network with

WLAN. Wireless LANs are used any place where cabling is not practical or

where a mobile connection is needed.

Our WaveLine wireless bridges have an operating temperature from 0°C to

60°C and a compact plastic housing featuring flammability class V0. They

are suited for entry in to industrial Ethernet wherever end devices must be

connected to the network in the simplest way.

Ac

tive

co

mp

on

en

ts

Industrial wireless

B.65

B

Ac

tive

co

mp

on

en

ts

Ac

tive

co

mp

on

en

ts

B

B.66

Industrial wireless

The Implementation

The Bluetooth gateway (master) functions as a slave in a

PROFIBUS-DP network or a DeviceNet™ network.

Together with the slaves, it is configured via GSD or EDS files.

Besides communication with bluetooth stations, the gateway

features an additional 12 digital inputs with M12 connectors.

Up to 31 Bluetooth masters can be operated within one

application. Each gateway can communicate with up to six of

its slaves using the WIRELESSopen protocol, which is based

on the CANopen standard.

SAI-Bluetooth

PROFIBUS

DeviceNet TM

GatewaySPS

Slave (1) ... Slave (6)

SAI-Bluetooth

The Concept

A Bluetooth master can perform wireless

communication with up to six slave stations.

All stations function as field devices with

IP67 protection. The connection from the sensor

or actuator utilizes a M12 connector.

Ac

tive

co

mp

on

en

ts

B

B.67

Industrial wireless

The Products

Bluetooth gateway function (master) for 6 Bluetooth slaves

outputs (configurable)

2 digital and 2 analogue outputs

All I/O signals on M12 connectors

Advantages

e.g., for mobile sections of the facility.

for operating voltages and communication

lighting and arrow-shaped status display. Additional colour

display change in event of I/O error

Ac

tive

co

mp

on

en

ts

B

B.68

Industrial wireless

Gateway

Ordering data

IO variants

12 digital inputs

12 digital inputs

Information

Type Qty. Order No.

SAI-AU M12 GW PB/BT 12I 1 1006980000

SAI-AU M12 GW DN/BT 12I 1 1060020000


Bus sharing unit Slave

Profibus transmission rate Max. 12 Mbaud

DeviceNetTM transmission rate Max. 500 kBaud


Fieldbus interface


Station addresses Rotary switch 1-125

bps rate automatic

Technical data

General data


V-0





Operating voltage



Accessories

Plug

Metal plug, Male M12, B-coded, straight

Metal plug, Socket M12, B-coded, straight

Connecting plug in M12 Plug

Terminating resistor in M12 plug

Metal plug, Male M12, 5-pole, shield A-coded

Metal plug, Socket M12, 5-pole, shield A-coded


Marker, transparent

M12 protective cap

Type Qty. Order No.

1 1784790000

1 1784780000

SAIEND PB M12 5P B-COD 1 1784770000

SAIEND CAN-M12 5P A-COD 1 1784760000

1 1784740000

1 1784750000

5 1912130000

SAI-SK-M12-UNI 20 2330260000

Information

M12

SAI-AU

Type Qty. Order No.

Ac

tive

co

mp

on

en

ts

B

B.69

Industrial wireless

Slaves

Ordering data

IO variants

16 digital inputs

Information

Type Qty. Order No.

SAI-AU M12 BT 16DI 1 1006940000

1 1006930000

1 1006920000

Technical data

General data


V-0





Operating voltage



Total current. max.


Analogue outputs

Analogue inputs

Resolution 12 Bit

Accuracy < 0,2 %

Information

Accessories


Marker, transparent

M12 protective cap

Type Qty. Order No.

5 1912130000

SAI-SK-M12-UNI 20 2330260000

Information

M12

SAI-AU

Type Qty. Order No.

Ac

tive

co

mp

on

en

ts

B

B.70

Optical media converter

Introduction Media converters

The use of fibre optics is advisable when reliability demands

are high or there are long distances to cover. One simple and

inexpensive solution is the Weidmüller media converter, which

glass fibre connection. The supply voltage can be designed

as a redundant system and therefore provides users with high

or ST fibre optic ports can be set transparently.

Weidmüller Industrial Ethernet media converters provide a

solution for industrial applications that require a highly reliable,

robust data exchange between copper and glass fibre media.

Media converters are cost-effective devices and give users

the option of integrating fibre optics into their networks. The

Weidmüller media converters are real-time-compatible and

remain transparent in the network.

Single-mode long-distance cabling

Pump station20 km

Transparent link

Media converter

Media converter

Long-distance cabling of up to 60 km is possible in single-mode

with our media converters. Our standard converter features a

max. 2-km transmission path in multi-mode and a max. 20-km

transmission path in single-mode. The required connection

cables can be found in Chapter D.

Ac

tive

co

mp

on

en

ts

B

B.71


Because of their transparent network links, our media converters

are well suited for use within a redundant connection in a ring

topology.

Media converter in RapidRing™, with transparent link

Media converter

Media converter

Managed Switch

RapidRing™

FO

Managed Switch

CU

FO

FO

CU

Production facility

CU

Managed Switch

CU

PLC

CU

B.72

B

WaveLine Media Converter

129

22,5108

% \ "

WaveLine Media Converter Ordering data


8916300000

8916290000

8963430000

8916310000

8958520000

Accessories

Type Order No.

8813490000

1609880000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


B.73

B

Media converter

74 mm

2.9”

85 mm

3.4”

Please allow82,5 mm/3.25”for Fiber Optic

Cable-SetDIN-RailTS-35

40 mm

% \ "

u

Media converter Ordering data


8808220000

8848840000

8808190000

Accessories

Type Order No.

8813490000

Note

Technical data

Note:

Ac

tive

co

mp

on

en

ts


Ac

tive

co

mp

on

en

ts

B

B.74

Serial media converter

COMServer

The WaveLine ComServer connects your serial interfaces to

your existing network infrastructure in the simplest way possible.

An Internet browser is used for the installation of serial and

network parameters. Similarly carried out over the Ethernet

interface, the configuration is simple and user-friendly. The

COMServer can be configured directly via the RS232 interface

or via the network. With web-based management, a remote

configuration is also possible. The IE-CS-1SERIAL-WAVE

WaveLine ComServer is available with an RS232 port (not

electrically isolated). The IE-CS-2SERIAL-WAVE WaveLine

ComServer comes with two RS232 ports ( RS232 and

RS-232/422/485 – electrically isolated).

Both types of WaveLine ComServers feature auto-negotiation

and auto-crossing (RJ45) functions as well as redundant power

Our COMServer enables you to integrate production facilities

(where, for example, only an RS232 interface is available) into

the corporate network. The Configurator and the configuration

software for the production facility can be installed on a remote

PC. The Configurator and the Com port redirector driver allow

you to configure the COMServer conveniently from a remote

supplies. The ComServer supports the following protocols:

TCP/IP, UDP/IP, DHCP, BOOTP, HTTP and AutoIP.

The Weidmüller WaveLine ComServer comes optionally with

the following ports: IE-CS-1SERIAL-WAVE with one RJ45, one

RS-232 and IE-CS-2SERIAL-WAVE with one RJ45, one RS-

232, one RS-232/485/422. The operational status of the power,

link activity and connection are displayed.

Both ComServer types (IP20 protection) have a compact build

(length: 108 mm, height: 127.8 mm, width: 22.5 mm or 45 mm).

The devices are enclosed in sturdy plastic housings and can be

simply snapped on to a TS35 mounting rail. They can operate in

temperatures ranging from 0 °C to 60 °C.

location. You can also setup communications with production

facilities remotely. This makes it possible to operate the plant in

your own network and to carry out maintenance on machinery

parts.

Integrate your serial end devices into the industrial Ethernet, using our COMServers

CU

CU

CU

Bedienoberfläche

Produktionsanlage

CU

RS232

Ac

tive

co

mp

on

en

ts

B

B.75


It is possible to use our COMServer as an interface converter.

This enables the data from an RS232 device to be forwarded to

a computer on the corporate network. The illustration shows an

example application of this interface. For example, a scale

located in the warehouse only has a RS232 connection.

The goal is to integrate it into the corporate network and allow it

to access new software.For this, the COMServer can be put to

use as a data-exchange interface between the scale‘s RS232

port and the Ethernet.

The integration of serial end devices into your industrial Ethernet

Inspection of incoming goods

Connection to any

Ethernet infrastructure

B.76

B

COMServer

129

22.5108

% \

COMServer Ordering data

Number of ports

1 x RJ45, 1 x RS232

Type Order No.

IE-CS-1SERIAL-WAVE 8925640000

Accessories

Type Order No.

WS 15/5 MC NEUTRAL 1609880000

Note

Technical data

1x RJ45; 1x RS-232

TS 35

Note:

Ac

tive

co

mp

on

en

ts


B.77

B

COMServer

45

129

108

% \

COMServer Ordering data


IE-CS-2SERIAL-WAVE 8925650000

Accessories

Type Order No.

WS 15/5 MC NEUTRAL 1609880000

Note

Technical data

TS 35

Note:

Ac

tive

co

mp

on

en

ts


Ac

tive

co

mp

on

en

ts

B

B.78

Power Over Ethernet

Power-over-Ethernet injector

Thanks to its high component density, Weidmüller‘s new

Power-over-Ethernet injector can supply up to four Ethernet

end devices with power in compliance with the PoE standard.

The power supply can be located anywhere on the network,

regardless of whether an Ethernet switch is present. Power-

over-Ethernet makes it easy to retro-fit and expand your existing

Ethernet networks. A separate 48-V power source is not

required for Weidmüller‘s quadruple Power-over-Ethernet

injector. The PoE supply voltage is generated directly from the

existing 24-V supply in the electrical cabinet.

Workstation

Production facility

Ethernet Ethernet

Ethernet

Ethernet

Ethernet + Power

1 2 3

4 5 6

* 0 #

7 8 9

1 2 3

4 5 6

* 0 #

7 8 9

The integration of PoE in existing networks

Network expansion with PoE

Ethernet

Workstation

Production facility

Ethernet

Ethernet

Ethernet + Power

1 2 3

4 5 6

* 0 #

7 8 9

1 2 3

4 5 6

* 0 #

7 8 9

B.79

B

Industrial Ethernet PoE injector, Advanced Line

145 mm

5.7"

156 mm6.14"

13.46 mm.530"

Allow 3.25" (82.55 mm)


44 mm

1.75"

% \

Industrial Ethernet PoE injector, Advanced Line Ordering data

Number of ports

4x RJ45 input, 4 x RJ45 output

Type Order No.

IE-POE4 1066840000

Accessories

RJ45 dust-protection plug

Type Order No.

IE-DPC 8813490000

Note

Technical data

Housing Aluminium

Length / Width / Height 140 mm / 45 mm / 155 mm

Ports 4 x RJ45 input; 4 x RJ45 output



Input power AC / DC Max. 75 W

Input frequency 47 - 63 Hz

Operating temperature, min.-max. -40 °C-75 °C


Installation TS 35;wall

Protection class IP 20

Data rate 10BASE-T/100BASE-TX

Functionality Transparent

Segment length 100 m

Status indication Data rate, Power, Connection/Activity

Approvals cULus, CE, EN55024, EN 55022

Supported protocols Profinet RT, Modbus TCP, TCP/IP, EthernetIP

Injector Power 48 W; 15 Watt per port

Note:

The PoE4 PoE injector allows you to connect up to four power-over-Ethernet

components. This allows you to easily implement plug-and-play power

supplies for your existing Ethernet networks. The main advantage of power-

over-Ethernet is that you can avoid using additional power supply cables.

This reduces the installation costs and decreases the downtime risk for the

end device.

With a sturdy aluminium housing, the AdvancedLine features a width of

only 45 mm for use in your Industrial Ethernet network. With IP20 protection

and a operating temperature range from –40°C to 75°C, this product line is

perfect for industrial applications.

Ac

tive

co

mp

on

en

ts

Power Over Ethernet

B.80

B

Ac

tive

co

mp

on

en

ts

Pa

ssiv

e c

om

po

ne

nts

C

C.1

Contents

Passive components

Passive components Introduction C.2

Weidmüller IE-LINE C.6

Weidmüller IE-LINE RJ45 C.30

Weidmüller IE-LINE M12 C.38

Front panel interface C.44

Pa

ssiv

e c

om

po

ne

nts

C

C.2

Industrial Ethernet – passive components

Introduction

Connection technology from Weidmüller

You need only one supplier for connecting and linking your

devices: Weidmüller – one-stop shopping for all your connection

technology needs.

Passive components

For offices ... ... and industrial applications

Standards Standards

Production floors Production units

Here are just a few of the relevant standards

Transmission characteristics:

Structured cabling

and others

Plug-in connectors to IEC 61076-3-106

Pa

ssiv

e c

om

po

ne

nts

C

C.3

Industrial Ethernet exists in a variety of different industrial environments.

Introduction

There, its advantages are well known:

Machine construction

Traffic engineering

Automotive construction

Process industry

Pa

ssiv

e c

om

po

ne

nts

C

C.4

Introduction

Practical Guidelines for Industrial Ethernet

and security

practical guidelines.

3-D data

Best service

ó

Industrial Ethernet Handbook- Design and planning - Installation - Commissioning

Pa

ssiv

e c

om

po

ne

nts

C

C.5

... and what more can Weidmüller do for you?

Introduction

Certificates

Pa

ssiv

e c

om

po

ne

nts

C

C.6

The Weidmüller IE-LINE plug-in connectors with STEADYTEC® technology

Weidmüller IE-LINE

STEADYTEC® – this name stands for the future of connection

STEADYTEC® forms the foundation for

The objective:

professional and consistent solutions.

The result:

originated:

The Ethernet connector system:

clever – flexible – modular

your application.

STEADYTEC® is a registered trademark of the Weidmüller,

Pa

ssiv

e c

om

po

ne

nts

C

C.7

Weidmüller IE-LINE

Tool-less assembly and powerful connections:

the RJ45 gigabit connector!

STEADYTEC®: Systematic benefits

combinations of inserts

IEC 61076-3-106

thanks to Weidmüller’s modular system

1. Strip sheath cladding and shorten shield to 5 mm

3. Snap together the two pluggable elements

2. Prepare wires and shorten

4. Finished

Pa

ssiv

e c

om

po

ne

nts

C

C.8

Weidmüller IE-LINE

Connector overview

Connectors for copper cable

RJ45 (IP20)

For use in office environments, in floor

applications

RJ45 (IP67)

M12, D-coded

Connector for fibre-optic cable

SC duplex

in the field or for connecting our active

components

SC-RJ

LC-Duplex

ST

our active components

Pa

ssiv

e c

om

po

ne

nts

C

C.9

Unlimited combinations: the modular principle

Weidmüller IE-LINE

guarantees you decisive advantages for your industrial

Features

couplers and RJ45 modules.

greases, acids and alkalis.

Plug insert Plug housing Flange-mounted housing Flange insert

Co

pp

er

RJ45 crimp HDC RockStar / Variant 5 RJ45 coupling

RJ45 can be assembled on-site Push-Pull / Variant 14

Fib

re-o

pti

c

2 x SC Push-Pull / Variant 4 2SC/SCRJ adapter

Refer to the sets

LC duplex Push-Pull / Variant 14 LC duplex adapter

Pa

ssiv

e c

om

po

ne

nts

C

C.10

Weidmüller IE-LINE

Metal plug

Housings Variant 14 PushPull RJ Variant 14 PushPull fibre-optic Variant 5 HDC

Inserts 1962560000 1962550000 1011570000 1011560000 1058110000 1058100000 1962540000

RJ45 AWG 24 crimp 1962720000 1963150000 1963140000 1012070000 1012160000 1963110000

RJ45 AWG 22

tool-free

1962730000 1963130000 1963120000 1012090000 1012170000 1963200000

LWL SC MM 1962750000 1963270000 1963260000 Please order separately

1962760000 1963310000 1963300000 Please order separately


LWL LC MM 1962780000 1963230000 1963220000 Please order separately


Protective cap 1965690000 1058280000 1058280000 1963690000

1963260000

Plastic plug

Housings Variant 4 PushPull

Inserts 1012460000 1012440000 1962530000 1962520000

RJ45 AWG 24 crimp 1962720000 1012560000 1012470000 1963190000 1963180000

RJ45 AWG 22

tool-free

1962730000 1012570000 1012490000 1963170000 1963160000

LWL SC MM 1962750000 1963370000 1963360000

1962760000 1963410000 1963400000

1962770000 1963390000 1963380000

LWL LC MM 1962780000 1963330000 1963320000

1962790000 1963350000 1963340000

Protective cap 1965690000 1963890000

1963110000 1963320000 1912170000

Individual components

Sets

Pa

ssiv

e c

om

po

ne

nts

C

C.11

Weidmüller IE-LINE

Individual components

Sets

Metal flange

Housings Variant 14 PushPull RJ Variant 14 PushPull fibre-optic Variant 5 HDC

Central flange Central flange

Inserts 1963540000 1011540000 1047950000 1963530000

RJ45 coupling 1962840000 1963470000 1012310000 1058250000 1963510000

RJ45 module 1962850000 1963480000 1012320000 1058270000 1963460000

1963840000 Please order separately Please order separately Please order separately Please order separately

Profinet 1963830000 Please order separately Please order separately Please order separately 1963700000

SC/SCRJ coupling Multi Mode 1964430000 1964450000 1058120000 1062590000

1962870000 1963440000 1058140000 1062600000

LC Duplex coupling Multi Mode 1964420000 1964440000 1058130000 1062610000

1962880000 1963430000 1058150000 1062620000

1019570000 Please order separately Please order separately Please order separately Please order separately

Protective cap 1965700000 1058310000 1058310000 1058310000 1665750000

1963510000 1964450000 1964460000 1012320000

Plastic flange

Housings Variant 4 PushPull

Inserts 1016960000 1963520000

RJ45 coupling 1962840000 1012370000 1963490000

RJ45 module 1962850000 1012380000 1963500000

1963840000 Please order separately 1963730000

Profinet 1963830000 Please order separately Please order separately

SC/SCRJ coupling Multi Mode 1964430000 Please order separately 1964470000


LC Duplex coupling Multi Mode 1964420000 Please order separately 1964460000


1019570000 Please order separately Please order separately

Protective cap 1965700000 1963900000

Pa

ssiv

e c

om

po

ne

nts

C

C.12

Weidmüller IE-LINE

Junction boxes

Flange version Variant 4 PushPull/plastic Variant 5 HDC

Housings

1 port – straight version 1966300000 1966220000 1966260000

2 ports – right version 1966310000 1966230000 1966270000

2 ports – left version 1966320000 1966240000 1966280000

2 ports – straight version 1966330000 1966250000 1966290000

1966260000

1966320000

1966270000

1966250000

C

C.13

Housing variant: 1 metal

12

.56

+ 0

.21

– 0

.22

Ø 27.41 + 0.48

– 0.49

Ø 27 + 0.3 0

24 ± 0.1

4 x Ø 3.3 ± 0.1

Housing variant: 1 metal Ordering data

Flange-mounted housing

Plug housing

With kink prevention

Type Order No.

1963540000

1962550000

1962560000

Accessories

Colour coding

yellow

Orange

green

grey

white

Dust cap

Type Order No.

1963030000

1963020000

1963010000

1963040000

1963000000

1962990000

1965700000

1965690000

Note

Technical data

Note:

Application:

Variation:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.14

Housing variant: 1 plastic

12

,56

+ 0

,21

– 0

,22

Ø 27,41 + 0,48

– 0,49

Ø 27 + 0,3 0

24 ± 0,1

4 x Ø 3,3 ± 0,1

Housing variant: 1 plastic Ordering data


Plug housing


Type Order No.

1016960000

1012440000

1012460000

Accessories

Colour coding

yellow

Orange

green

grey

white

Dust cap

Type Order No.

1963030000

1963020000

1963010000

1963040000

1963000000

1962990000

1965700000

1965690000

Note

Technical data

Note:

Application:

Variation:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.15

Housing variant: 4 plastic

Ø 22.5 ± 0.2

4 x Ø 3.3 ± 0.1

Ø 22.5 ± 0.2

21 ± 0.1

32 ±

0.1

3.3 ± 0.1

23.9

5 ±

0.1

Housing variant: 4 plastic Ordering data


Plug housing


Type Order No.

1963520000

1962520000

1962530000

Accessories

Colour coding

yellow

Orange

green

grey

white

Dust cap

Type Order No.

1963030000

1963020000

1963010000

1963040000

1963000000

1962990000

1963900000

1963890000

Note

Technical data

Note:

Application:

Variation:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.16


39.4

23.8

30

Ø3.3b

42

24.2

30

36



Plug housing

Type Order No.

1963530000

1962540000

Accessories

Dust cap Type Order No.

1968930000

1968920000

Note

Technical data

Note:

Application:

Variation:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.17


12

,56

+ 0

,21

– 0

,22

Ø 27,41 + 0,48

– 0,49

33 ± 0,1

18

,4 ±

0,0

5

22 ± 0,05

M3

R1,

25



Plug housing

Type Order No.

1011540000

1047950000

1047940000

1011560000

1011570000

1058100000

1058110000

Accessories

Colour coding

yellow

Orange

green

grey

white

Dust cap

Type Order No.

1963030000

1963020000

1963010000

1963040000

1963000000

1962990000

1058310000

1058280000

Note

Technical data

Note:

Application:

The differences:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.18

RJ45 inserts

9,4

5

12,9

40,22

13,1

9

15,6

32,51

13,1

9

15,6

40,1

RJ45 inserts Ordering data

Flange insert

Plug insert

Type Order No.

1019570000

1962840000

1962850000

1963840000

1963830000

1962730000

1962720000

Accessories

tools Type Order No.

9202800000

Note

Technical data

Note:

Application:

RJ45 tool-free connector insert

RJ45 crimp connector insert:

RJ45 flange insert:

USB flange insert

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.19

SC inserts

9,5

13,95

46,5

14,5

62,7

13,1

9

17,8

33,9

SC inserts Ordering data

Flange insert

Plug insert

Type Order No.

1962870000

1964430000

1962760000

1962750000

1962770000

Accessories


9205320000

9205340000

9205350000

1032030000

Note

Technical data

Note:

Application:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.20

LC inserts

9,5

13,15

31,3

14,5

59,1

9,3

15,9

30,9

LC inserts Ordering data

Flange insert

Plug insert

Type Order No.

1962880000

1964420000

1962790000

1962780000

Accessories


9205330000

1032030000

Note

Technical data

Note:

Application:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.21

Outlet boxes IP 67

80

125113106

113

725280

756356

63

7252

IP 67 junction boxes Ordering data

Variation 1

Variant 4

Variation 5

Type Order No.

1966300000

1966320000

1966310000

1966330000

1966220000

1966240000

1966230000

1966250000

1966260000

1966280000

1966270000

1966290000

Accessories

Flange insert Type Order No.

1962850000

1963840000

1963830000

Note

Technical data

grey

Note:

Application:

Variations:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.22

Junction box, cable coupling

41.8

1.65"

64

2.52"

61.6

2.4

3"

Ø 41.8

1.65"

97.7

3.85"106.9

4.21"

118.7

4.67"

42.4

1.6

7"

Junction box, cable coupling Ordering data

Variation 1

Variant 4

Type Order No.

1061830000

1061820000

1045780000

1045960000

Accessories


1962850000

1963840000

1963830000

Note

Technical data

Note:

The differences:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.23

Mounting rail outlet RJ45

Mounting rail outlet RJ45 Ordering data

RJ45 Type Order No.

8946920000

8946930000

8946940000

8946950000

Accessories

markers

Labels

Type Order No.

1857440000

1964070000

1964100000

1964110000

1964080000

1964120000

1964090000

Note

Technical data

Note:

Application:

Variations:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.24

Mounting rail outlet FO

Mounting rail outlet FO Ordering data

Fibre-optic Type Order No.

8947010000

8947020000

8946970000

8946980000

8946990000

8947000000

Accessories

markers

Labels

Type Order No.

1857440000

1964070000

1964100000

1964110000

1964080000

1964120000

1964090000

Note

Technical data

Note:

Application:

Variations:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.25

Mounting rail outlet USB

Mounting rail outlet USB Ordering data

USB Type Order No.

8946960000

Accessories

markers

Labels

Type Order No.

1857440000

1964070000

1964100000

1964110000

1964080000

1964120000

1964090000

Note

Technical data

Note:

Application:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.26

19“ patch panel

44

482.6

116.5

19“ patch panel Ordering data

19“ patch panel Type Order No.

1049270000

1049910000

1049920000

1049930000

Accessories


1962850000

1963840000

1963830000

1019570000

Note

Technical data

Note:

Application:

The differences:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.27

RJ45 crimp plug

13.9

10

ca. 41

0.8

6.6

16.15 0.15

11.68 0.08

RJ45 crimp plug Ordering data

Plug Type Order No.

1963590000

1963580000

Accessories

Kink-prevention sleeve

yellow

Orange

green

grey

white

tools

Type Order No.

1962480000

1962470000

1962450000

1962490000

1962440000

1962430000

1962500000

9202800000

Note

Technical data

Note:

Application:

Variations:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.28

RJ45 plug field installation

9.4

5

12.9

51.32

RJ45 plug, no tools required Ordering data

Plug Type Order No.

1963600000

Accessories

Strain relief

yellow

Orange

grey

green

white

Type Order No.

1963090000

1963080000

1963070000

1963060000

1963100000

1963050000

Note

Technical data

Note:

Application:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

C

C.29

FO connector

FO connector Ordering data

Plug LC-duplex

Plug SC

Plug SC-duplex

Plug SCRJ

Type Order No.

1962980000

1962970000

1962920000

1962910000

1962930000

1964410000

1964480000

1962950000

1962940000

1962960000

Accessories

Fibre-optic plug clip Type Order No.

1962900000

1962890000

Note

Technical data

Note:

Application:

Connection brackets for SCRJ:

Connection brackets for SCD:

Pa

ssiv

e c

om

po

ne

nts

Weidmüller IE-LINE

Pa

ssiv

e c

om

po

ne

nts

C

C.30

Overview of Weidmüller IE-LINE RJ45 and M12

Weidmüller IE-LINE RJ45

For use in switching cabinets and on machines and plants in

harsh industrial environments.

Terminal rail outlets

for connections in switching

cabinets or junction boxes

Adapter and coupler

Junction box, coupler and plug PCB connecting elements

for your devices in the field of

Plug-in connector

connection

Built-in flange

for switching cabinet interfaces

Cable splitter module

Connecting module

for connecting or repairing installation

lines

C

C.31

Terminal rail outlets

(1TE)

17,5 + 0,560

45±0

,5

35

26,1

26,1

Terminal rail outlets Ordering data

with Coupling

with module insert

Type Order No.

8879050000

8808340000

8808360000

8891980000

Accessories

Type Order No.

8813500000

Note

Technical data

Note:

Application:

The differences:

Pa

ssiv

e c

om

po

ne

nts


C

C.32

RJ45 connecting plug

24,8

6,6

11,68

RJ45 connecting plug Ordering data

Plug Type Order No.

8813110000

8813120000

Accessories


9202800000

Note

Technical data

Ω

Ω

Note:

Application:

Variations:


Pa

ssiv

e c

om

po

ne

nts

C

C.33

Pa

ssiv

e c

om

po

ne

nts

Junction box, cable coupler, plug V 06

74

54 64

5

8,5

64

79

41,8

59,5

49

Junction box, cable coupling, V 06 plug Ordering data

Description of article Type Order No.

8808370000

8813090000

8808380000

Accessories


9202800000

Note

Technical data

Note:

Application:

The differences:


C

C.34

Built-in flange V 06

32,526,6±0,2

33

17

,5

22

,89

±0

,2

16,35

40,95

8,9

16,35

33,85

24

,33

8,9

16,35

29,3

8,9

16,35

32,93

22

,08

8,9

V 06 mounting flange Ordering data

Coupling flange

RJ45 module flange

USB flange

Type Order No.

8808450000

8829450000

8829440000

8808440000

8892670000

Accessories


8808330000

8908840000

8878120000

8878130000

Note

Technical data

Note:

Application:

TVariations:


Pa

ssiv

e c

om

po

ne

nts

C

C.35

Pa

ssiv

e c

om

po

ne

nts

Cable splitter module

Plug RJ45

Socket RJ45Socket RJ45

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 81 2 3 4 5 6 7 8

Cable splitter module Ordering data


8808400000

Accessories

Note

Technical data

Note:

Application:


C

C.36

Connection module

Connecting module Ordering data


8808410000

Accessories


9013970000

Note

Technical data

®

Note:

Application

Pa

ssiv

e c

om

po

ne

nts


C

C.37

Pa

ssiv

e c

om

po

ne

nts

Pa

ssiv

e c

om

po

ne

nts

C

C.38

M12 connection system

Weidmüller IE-LINE M12

Description

M12 is by far the most widespread connection method for

controller systems and field level connections M12 connections

have been used with success in the automation sector for about

thirty years. The M12 is trusted by users for its compact and

sturdy design. It is also available with IP67 protection in

compliance with EN 60529. IE organizations and associations

are now leading harmonization efforts regarding IP67

connections in Industrial Ethernet. These organizations agree on

the use of the M12 connector with the D-coded mating profile.

The Profibus User Organization (Profinet), Ethernet Powerlink

Standardization Group (Ethernet Powerlink), Modbus IDA

(Modbus) and ODVA (Ethernet/IP) all support the M12, D-coded

connection along side the RJ45 connection.

Application

M12, D-coded plug-in connectors and cables are used for

applications in harsh industrial environments – ideal for Ethernet

connections in class of protection IP 67 between devices on the

machine and in the switching cabinet, or in moving cable carriers.

Features

The benefits for you

C

C.39

M12 connector, screw connection

appr

ox. 6

2

M12x1

Ø 19.6

Ø 6–8 mmCable entry


M12x1

Ø 19.6

appr

ox. 5

7

M12 connector, screw connection 1 Ordering data

Male

Socket

Type Order No.

1892120000

1892130000

Accessories

Note

Technical data

Note:

Application:

Features:

The differences:

Pa

ssiv

e c

om

po

ne

nts


C

C.40

M12 connector, tension-clamp connection

appr

ox. 6

2

M12x1

Ø 19.6



M12x1

Ø 19.6

appr

ox. 5

7

M12 connector, tension-clamp connection Ordering data

Male

Socket

Type Order No.

1892120001

1803930001

1892130001

Accessories

Note

Technical data

Note:

Application:

Features:

Differences:

Pa

ssiv

e c

om

po

ne

nts


C

C.41

M12 adapters and coupling

Adaptors and couplings M12 Ordering data

Adapter

with Coupling

Type Order No.

8901620000

8901630000

8901640000

Accessories

Note

Technical data

Note:

Application:

Variations:

Pa

ssiv

e c

om

po

ne

nts


C

C.42

M12 PCB connecting element

M12 PCB connection element Ordering data

Connection element Type Order No.

8902810000

8902820000

Accessories

Note

Technical data

Note:

Variations:

Pa

ssiv

e c

om

po

ne

nts


C

C.43

Pa

ssiv

e c

om

po

ne

nts

Pa

ssiv

e c

om

po

ne

nts

C

C.44

Front panel interface

Communicating through the closed front panel of the

switchgear cabinet, by using Weidmüller‘s front panel

interface in IP65.

Access to the computer is typically via standardized interfaces

such as RJ45 and USB, in order to program and configure

the facility. With IPC however, this interface is located within

switchgear cabinet. Users must always first open the cabinet

door before servicing. In conjunction with our customers,

Weidmüller has developed an amazingly simple and practical

solution for accessing devices within the cabinet without

opening the cabinet door - the FrontCom® front panel interface.

The front panel interface also functions as a service flap through

which the standard interfaces are easily accessible externally.

Designed with IP65 protection, the front panel interface offers

a cover which can be closed and locked. You can thus raise

the level of security when needed and prevent access by a third

party. In addition, FrontCom® has an efficient and open design.

Customized interfaces and functions can be delivered

pre-assembled as adapter plates, on customer request. The

result is a quicker, simpler and more targeted approach to your

system‘s implementation, service, monitoring and expansion.

Because of a variety of available adapter solutions, FrontCom®

accepts different interfaces and can be variably adapted for your

application.

FrontCom®

Pa

ssiv

e c

om

po

ne

nts

C

C.45


FrontCom® simplifies service, start-up, and monitoring

Weidmüller‘s FrontCom® product line offers many possibilities;

it can be combined with RJ45, Sub-D 9-pole/15-pole/19-pole,

USB or Schuko sockets. Additional interfaces available on

request.

Both the proven RJ45 modules (from the IE line) with

STEADYTEC® technology as well as the USB module can

be used in the FrontCom® Micro.

FrontCom® Micro

FrontCom® Custom

FrontCom® RockStar®

Create your customized service interface.

Pa

ssiv

e c

om

po

ne

nts

C

C.46


FrontCom® frame

designation tags, no insert

Technical data

Version

Material

UL 94 flammability class

Colour

Resistance to shocks

Threaded bolts / screws

Durabiity

Ingress protection class

Pollution severity

Storage temperature

Length x width x height mm

Note

Application

85

59

101

136

1473324

15

R132

Locking mechanism

Lock with key

FrontCom® GH Key

lockable

Lockable housing

PPE

V0

RAL 7004

to DIN EN 50102

M5 / V2A

UV; Fuel; Oil

IP65 according to EN 60529

3

-20 °C…+80 °C

33 x 101 x 136

With 2 keys, without insert

FrontCom® GH Knob

lockable

Lockable housing

PPE

V0

RAL 7004

to DIN EN 50102

M5 / V2A

UV; Fuel; Oil


3

-20 °C…+80 °C

33 x 101 x 136

with lock, without insert

Type Qty. Order No.

FRONTCOM GH KEY 1 1879200000

Designation tags ESG8/17 1720610000

Felt pen STI-S 0508401694

Ordering data

Note

Type Qty. Order No.

FRONTCOM GH KNOB 1 1879210000



Pa

ssiv

e c

om

po

ne

nts

C

C.47


FrontCom® Inserts

® frames

Technical data

Version

Material


Colour

Storage temperature

Interfaces


Note

Application

USB adapter

RJ45 adapter

Sub-D 9-pole

Sub-D 25-pole

Earthed power socket TS 35:

Part No. 8734580000 not included

View of rear

Earthing screw must be connected!

Tightening torque

for screws: 1.5 Nm

FrontCom® AR Data

RJ45, USB, SUB D 9+25 pole

Combination of four integrated data interfaces

Wired 1:1

PPE

V0

RAL 7004

-20 °C…+80 °C

1 x USB: type A, female-female,

Lockable with inserted USB stick

1 x RJ45: female-female, Cat.From 5 to 100 MHz

1 x SUB D 9-pole: female-male

1 x SUB D 25-pole: female-male

85 x 101 x 136

FrontCom® AR Plug

Adapter for 230 V earthed plug

Frame includes a Schuko socket

Stainless steel

-20 °C…+80 °C

230 V Schuko socket

59 x 101 x 136

Type Qty. Order No.

FRONTCOM AR DATA 1 1879220000



Ordering data

Note

Type Qty. Order No.

FRONTCOM AR PLUG 1 1879230000

Earthed power socket 8734580000

Pa

ssiv

e c

om

po

ne

nts

C

C.48


FrontCom® Inserts

® frames

Technical data

Version

Material


Storage temperature

Interfaces


Note

Application

Cut-out: HA48

see drilling template

FrontCom® AR

Part No. 1879240000

FrontCom® Plug

FrontCom® Data

FrontCom® GH

FrontCom® AR

Universal

Universal plate without cut-outs

Aluminium

V0

-20 °C…+80 °C

Universal

2,5 x 101 x 136

Classic

Aluminium plate, completely assembled nitte

Aluminium

-20 °C…+80 °C

1x Schuko socket

1x RJ45. female-female

1x USB, Type A, female-female

1x SUB D 9-pole, male-female

136 x 101 x 35

Type Qty. Order No.

FRONTCOM AR 1 1879240000

Ordering data

Note

Type Qty. Order No.

FC-AR-D9/RJ45/USB/230 1 1008130000

Pa

ssiv

e c

om

po

ne

nts

C

C.49


FrontCom® frame and insert

Technical data

Version

Material

Resistance to shocks

Ingress protection class

Storage temperature

Interfaces


Note

Application


Frame

109.5

94 Ø5.5

7

b

110

126.6

65

82.5

8931 23

.3

Lockable housing

diecast aluminium

to DIN EN 50102


-40 °C…+100 °C


Insert

Aluminium plate, completely assembled

Aluminium

-20 °C…+80 °C

1x Schuko socket

1x RJ45. female-female

1x USB, Type A, female-female

1x SUB D 9-pole, male-female

74 x 85 x 35

Type Qty. Order No.

HDC 32B ADLU 1 1219800000

Ordering data

Note

Type Qty. Order No.

FC-RS-D9/RJ45/USB/23 1 1008120000

Pa

ssiv

e c

om

po

ne

nts

C

C.50

Front panel interface – Accessories

InsertsBase plates

FrontCom® Custom and RockStar®

Type Order No.

Insert for RJ45 coupling0 4341270000

Insert for USB coupling 8941340000

Insert for Sub-D 9-pole plug/socket0 8910980000

Insert for Sub-D 9-pole plug/plug 5655400000

Insert for Sub-D 9-pole socket/socket 5655390000




Insert for Sub-D 25-pole plug/socket 5655440000


Einsatz Sub-D 25-pol Buchse/Buchse 5655460000

Base platesType Order No.

Frontcom Standard base plate 4341150000

Frontcom RockStar base plate 4341160000

Pa

ssiv

e c

om

po

ne

nts

C

C.51


FrontCom® Micro

A

Technical data

Category

Protection class

Housing material

Colour

Shielding

Installation

Plugging cycles

FrontCom® Micro

87

21

.9

30 34.7

Cat. 6A / Class EA (IEC 11801 PDAM Am 1.2 2007)

IP 65 gemäß EN 60529

PA; UL 94: V-0 (Protective cap NBR)

black

360° shield contact

to electrical cabinet, distribution board or control panel

750 plugging cycles for connectors, according to IEC 60603-7

Application:

Weidmüller‘s FrontCom® Micros are your best choice when you

need an IP65 connection at the control panel, electrical cabinet

or distribution board.

The differences:

version

Ethernet

Markers, FrontCom® Micro

Type Order No.IE-FCM-RJ45-C 1018790000

IE-FCM-RJ45-FJ-A 1018810000

IE-FCM-RJ45-FJ-B 1018820000

IE-FCM-RJ45-FJ-P 1018830000

IE-FCM-USB-A 1018840000

SM-H 27/18 1716630000

SM 27/18 MC 1699860000

Ordering dataProduct description

FrontCom®

FrontCom®

FrontCom®

FrontCom®

FrontCom®

SwitchMark holder

SwitchMark markers, white

Note: Refer to Catalogue 7 for additional variants.

Pa

ssiv

e c

om

po

ne

nts

C

C.52

Ca

ble

D

D.1

Contents

Cable

Cable

Overview – Copper cables D.2

Galaxy Configurator for copper cable D.4

Copper cables – bulk stock - installation cable D.5

Copper cables – bulk stock - connecting cable D.9

Copper cables – bulk stock - trailing cable D.13

Copper cables – bulk stock - ProfiNet cable D.14

Copper cables – assembled cable - patch cable D.17

Copper cables – assembled cable - crossover-patch cable D.18

Copper cables – assembled cable - system cable D.19

Copper cables – assembled cable - trailing cable D.25

Overview – Fibre-optic cables D.32

Galaxy Configurator for fibre-optic cable D.34

Fibre-optic cables – bulk stock - FO connecting cable D.35

Fibre-optic cables – bulk stock - FO trailing cable D.36

Fibre-optic cables – assembled cable - FO system cable D.37

Fibre-optic cables – assembled cable - FO trailing cable D.39

Fibre-optic cables – assembled cable - FO patch cable D.41

Ca

ble

D

D.2

Overview – Copper cables

Overview of copper cables

Copper cables should be your first choice for applications in

offices and harsh industrial environments.

Advantages:

Industrial installation cables, horizontal cables

…for stationary, permanent

installation in cable ducts and cable

trays

Industrial connecting cables

...for flexible installations in machines

and plants in industrial applications

and difficult environments

Industrial trailing cables

...for applications subjected to

constant movement

System cable for railway applications

Pre-assembled cable in Cat.5 with

can be used on railway vehicles for

both interior and exterior installations.

Industrial patch cables

...not only for office applications, but

also in switching cabinets for

industrial applications

and zero halogens

Industrial system cables

...pre-assembled cables for flexible

installations in machines and plants in

industrial applications and difficult

environments

Industrial trailing cables

Pre-assembled cable for constant

motion, e.g., with draglines

Raw cables Assembled cables

Ca

ble

D

D.3

Overview – Copper cables

Ordering data for copper cables

Type Cat./Class Plug-in connector Length

left right

Industrial installation cables 100 m Metre goods

Cat.5 - - 8813160000 8944310000

Cat.5 - - 8813150000 8953160000

Cat.7 - - 8813140000 8955350000

Cat.7 - - 8813130000 8955360000

- - 8899000000 8855950000

Industrial connecting cables 100 m

Cat.5 - - 8813200000 8938880000

Cat.5 - - 8813190000 8955490000

Cat.7 - - 8813180000 8954300000

Cat.7 - - 8813170000 8955480000

- - 8898990000 8955560000

Industrial trailing cables Metre goods

Cat.5 - - 8813210000

- - 8899010000

Industrial trailing cables 1 m 2 m 5 m 10 m 15 m 20 m

Cat.5 8829710000 8829720000 8829730000 8829740000 8829750000 8829760000

1,5 m 3 m 5 m 10 m

Cat.5 8877610015 8877610030 8877610050 8877610100

Industrial patch cables 0,5 m 1 m 2 m 3 m 4 m 5 m 10 m

Cat.6 8808830000 8808840000 8808850000 8808860000 8892570000 8808870000 8808880000

20 m 30 m 40 m 50 m 60 m 70 m 80 m

8867440000 8867460000 8867470000 8867480000 8867700000 8867490000 8867500000

0,5 m 1 m 2 m 3 m 4 m 5 m 10 m

Cat.6 8818620000 8829460000 8818630000 8829470000 8829480000 8829490000

Industrial system cables 1 m 2 m 5 m 10 m 15 m 90 m

Cat.5 8829560000 8829590000 8829620000 8829650000 8829680000 8894650000

Cat.6 8829500000 8815050000 8815080000 8815110000 8829530000

Cat.5 8829570000 8829600000 8829630000 8829660000 8829690000

Cat.6 8829510000 8815060000 8815090000 8815120000 8829540000

Cat.5 8829580000 8829610000 8829640000 8829670000 8829700000

Cat.6 8829520000 8815070000 8815100000 8815130000 8829550000

Ca

ble

D

D.4

Copper cables

Galaxy Configurator for copper cable

offline with the Galaxy software program) makes it possible for

you to create fully-assembled cables adapted to your

requirements and specifications.

both ends, or with two different mating profiles, or with one end

left open.

data sheets for all of your customized cable variants.

representative.

D

D.5

Bulk stock - installation cable Cat.5 PUR

Bulk stock - installation cable Cat.5 PUR Ordering data

Cat.5 Ethernet, PUR Type Order No.

8813160000

8944310000

Accessories

Sheathing stripper

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.6

Bulk stock - installation cable Cat.5 PVC

Bulk stock - installation cable Cat.5 PVC Ordering data

Cat.5 Ethernet, PVC Type Order No.

8813150000

8953160000

Accessories

Sheathing stripper

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.7

Bulk stock - installation cable Cat.7 PUR

Bulk stock - installation cable Cat.7 PUR Ordering data


8813140000

8955350000

Accessories

Sheathing stripper

Type Order No.

1727770001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.8

Bulk stock - installation cable Cat.7 PVC

Bulk stock - installation cable Cat.7 PVC Ordering data


8813130000

8955360000

Accessories

Sheathing stripper

Type Order No.

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.9

Bulk stock - connection cable Cat.5 PUR

Bulk stock - connection cable Cat.5 PUR Ordering data


8813200000

8938880000

Accessories

Sheathing stripper

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.10

Bulk stock - connection cable Cat.5 PVC

Bulk stock - connection cable Cat.5 PVC Ordering data


8813190000

8955490000

Accessories

Sheathing stripper

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.11

Bulk stock - connection cable Cat.7 PUR

Bulk stock - connection cable Cat.7 PUR Ordering data


8813180000

8954300000

Accessories

Sheathing stripper

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.12

Bulk stock - connection cable Cat.7 PVC

Bulk stock - connection cable Cat.7 PVC Ordering data


8813170000

8955480000

Accessories

Sheathing stripper

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.13

Bulk stock - trailing cable Cat.5 PUR

Bulk stock - dragline cable Cat.5 PUR Ordering data


8813210000

8936390000

Accessories

Sheathing stripper

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

IE-CST 9204350000

9030060000

Note

Technical data

≤

Note:

Application:

Ca

ble

Copper cables

D

D.14

Bulk stock - PROFINET cable

Bulk stock - Profinet cable Ordering data

Cat.5 PROFINET, PVC Type Order No.

8899000000

8955950000

Accessories

Sheathing stripper

Type Order No.

1718411687

1718431687

1689470001

1730560001

1719840000

1719850000

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.15



Cat.5 PROFINET, PVC Type Order No.

8898990000

8955560000

Accessories

Sheathing stripper

Type Order No.

1718411687

1718431687

1689470001

1730560001

1719840000

1719850000

IE-CST 9204350000

9030060000

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.16



Cat.5 PROFINET, PUR Type Order No.

8899010000

8947670000

Accessories

Sheathing stripper

Type Order No.

1718411687

1718431687

1689470001

1730560001

1719840000

1719850000

IE-CST 9204350000

9030060000

Note

Technical data

≤

Note:

Application:

Ca

ble

Copper cables

D

D.17

Assembled cable - patch cable

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

Assembled cable - patch cable Ordering data

Cat.6,patch cable, LSZH Type Order No.

8808840000

8808850000

8808860000

8892570000

8808870000

8808880000

8922580075

8922580150

8867440000

8867450000

8867460000

8867560000

8867470000

8867480000

8867700000

8867490000

8867500000

8867570000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.18

Assembled cable - crossover patch cable

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

Assembled cable - crossover patch cable Ordering data

Cat.6, Cross-over patch cable, LSZH Type Order No.

8818620000

8829460000

8818630000

8829470000

8829480000

8829490000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.19

Assembled cable - system cable IP20-IP20 Cat.5

Assembled cable - system cable IP20-IP20 Cat.5 Ordering data

Cat.5 Ethernet, PUR, IP20-IP20 Type Order No.

8829560000

8829590000

8829620000

8829650000

8829680000

8935660200

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.20

Assembled cable - system cable IP20-IP20 Cat.6

Assembled cable - system cable IP20-IP20 Cat.6 Ordering data


8829500000

8815050000

8815080000

8815110000

8829530000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.21

Assembled cable - system cable IP20-IP67 V06 Cat.5

Assembled cable - system cable IP20-IP67 V06 Cat.5 Ordering data


8829570000

8829600000

8829630000

8829660000

8829690000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.22




8829510000

8815060000

8815090000

8815120000

8829540000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.23




8829580000

8829610000

8829640000

8829670000

8829700000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.24




8829520000

8815070000

8815100000

8815130000

8829550000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

Copper cables

D

D.25

Assembled cable - trailing cable IP67-IP67 V06

Assembled cable - dragline cable IP67-IP67 V06 Ordering data


8829710000

8829720000

8829730000

8829740000

8829750000

8829760000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

≤

Note:

Application:

Ca

ble

Copper cables

D

D.26

Copper cables




1066850000

1066860000

1066870000

1066880000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Ca

ble

D

D.27

Assembled cable - trailing cable M12-M12

Assembled cable - dragline cable M12-M12

Note:

Application:

Ca

ble

Copper cables

Ordering data

Cat.5 PROFINET, PUR, M12-M12

Cat.5 PROFINET, PUR, M12-M12 female

Type Order No.

1025950005

1025950015

1025950030

1025950050

1025950100

1059330015

1059330030

1059330050

1059330100

Accessories

Type Order No.

1718411687

1718431687

Note

Technical data

≤

D

D.28

Assembled cable - dragline cable M12-RJ45

Assembled cable - dragline cable M12-RJ45 Ordering data

Cat.5 PROFINET, PUR, M12-RJ45 Type Order No.

1044470010

1044470015

1044470030

1044470050

1044470100

Accessories

Type Order No.

1718411687

1718431687

Note

Technical data

≤

Note:

Application:

Ca

ble

Copper cables

D

D.29

Assembled cable - dragline cable M12-open

Assembled cable - dragline cable M12-open Ordering data

Cat.5 PROFINET, PUR, M12-open Type Order No.

1025940015

1025940030

1025940050

1025940100

Accessories

Type Order No.

1718411687

1718431687

1719840000

1719850000

Note

Technical data

≤

Note:

Application:

Ca

ble

Copper cables

D

D.30

Assembled cable - rail cable M12-M12

Assembled cable - rail cable M12-M12

Note:

Description

Ca

ble

Copper cables

Ordering data

Cat.5, PUR, M12-M12

Cat.5 PUR, M12-M12 female

Type Order No.

1010850015

1010850030

1010850050

1010850100

1059340015

1059340030

1059340050

1059340100

Accessories

Type Order No.

1718411687

1718431687

Note

Technical data

D

D.31

Assembled cable - rail cable M12-open

Assembled cable - rail cable M12-open Ordering data

Cat.5, PUR, M12-open Type Order No.

1010840015

1010840030

1010840050

1010840100

Accessories

Type Order No.

1718411687

1718431687

1719840000

1719850000

Note

Technical data

Note:

Description

Ca

ble

Copper cables

Ca

ble

D

D.32

Overview - Fibre-optic cables

Overview - Fibre-optic cables (FO)

Fibre-optic cables are your best choice for working in harsh

industrial environments - if you

must ensure electrical isolation in the case of potential differences

Industrial FO connecting cables

...for flexible installations in machines

and plants in industrial applications

and difficult environments

your own connecting cables

Industrial FO trailing cables

...for applications subjected to

constant movement

pre-assembled cables

Industrial FO patch cables

...for use in industrial switching

cabinets or junction boxes

Industrial FO adapter cables

Industrial fibre-optic system cable

For flexible installations in and around

machinery and plants – for harsh,

industrial surroundings

Raw cables Assembled cables

Ca

ble

D

D.33

Overview - Fibre-optic cables

Ordering data for Fibre-optic cables (FO)

Type Breakout/ Plug-in connector Length

Zipcord left right

Industrial FO connecting cables Metre goods

- - 8946000000

- - 8956060000

Industrial FO trailing cables Metre goods 1 m 3 m 5 m 10 m

- - 8956070000

- - 8956050000

8876430010 8876430030 8876430050 8876430100

8876440010 8876440030 8876430050 8876440100

ST ST 8876450010 8876450030 8876450050 8876450100

ST ST 8876460010 8876460030 8876460050 8876460100

Industrial FO patch cables 1 m 2 m 3 m 5 m 10 m

8813300000 8813310000 8813320000 8876350050 8876350100

8813330000 8813340000 8813350000 8876360050 8876360100

ST ST 8813240000 8813250000 8813260000 8876370050 8876370100

ST ST 8813270000 8813280000 8813290000 8876380050 8876380100

Industrial FO adapter cables 2 m

ST 8813390000

ST 8813400000

Industrial FO system cables 10 m 50 m 100 m

8813450000 8876390500 8876391000

8813460000 8876400500 8876401000

ST ST 8813430000 8876410500 8876411000

ST ST 8813440000 8876420500 8876421000

Ca

ble

D

D.34

Galaxy Configurator for fibre-optic cable

Galaxy Configurator for fibre-optic cable

create fully-assembled cables adapted to your requirements and

specifications.

A variety of plug types in the following protective classes are

available:

IP 20 IP 67

You then have the choice of configuring a cable which is identical

on both ends, or with two different mating profiles, or with one end

left open.

also be customized:

The cable length can also be customized:

The cable configurator can also automatically create technical

data sheets for all of your customized cable variants.

All of your customized cable selections can be sent to

representative.

D

D.35

Bulk stock - FO connection cable

Bulk stock - FO connection cable Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8946000000

8956060000

Accessories

tools

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

9205330000

1032030000

Note

Technical data

Note:

Application:

Ca

ble

Fibre-optic cable

D

D.36

Bulk stock - FO trailing cable

Bulk stock - FO dragline cable Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8956070000

8956050000

Accessories

tools

Type Order No.

1689470001

1730560001

1719840000

1719850000

1718411687

1718431687

9205330000

1032030000

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.37

Assembled cable - FO system cable SC-SC

Assembled cable - FO system cable SC-SC Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8813450000

8876390500

8876391000

8813460000

8876400500

8876401000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.38

Assembled cable - FO system cable ST-ST

Assembled cable - FO system cable ST-ST Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8813430000

8876410500

8876411000

8813440000

8876420500

8876421000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.39

Assembled cable - FO trailing cable SC-SC

Assembled cable - FO dragline cable SC-SC Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8876430010

8876430030

8876430050

8876430100

8876440010

8876440030

8876440050

8876440100

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.40

Assembled cable - FO trailing cable ST-ST

Assembled cable - FO dragline cable ST-ST Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8876450010

8876450030

8876450050

8876450100

8876460010

8876460030

8876460050

8876460100

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.41

Assembled cable - FO patch cable SC-SC

Assembled cable - FO patch cable SC-SC Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8813300000

8813310000

8813320000

8876350050

8876350100

8813330000

8813340000

8813350000

8876360050

8876360100

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.42

Assembled cable - FO patch cable ST-ST

Assembled cable - FO patch cable ST-ST Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8813240000

8813250000

8813260000

8876370050

8876370100

8813270000

8813280000

8813290000

8876380050

8876380100

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.43

Assembled cable - FO patch cable ST-SC

Assembled cable - FO patch cable ST-SC Ordering data

Core 50 μm

Core 62,5 μm

Type Order No.

8813390000

8813400000

Accessories

Type Order No.

1689470001

1730560001

Note

Technical data

Note:

Application:

Fibre-optic cable

Ca

ble

D

D.44

Ca

ble

Ac

ce

sso

rie

s

E

E.1

Contents

Accessories

Accessories Introduction E.2

Tools E.3

Cable tester E.11

Tool case E.12

SlimFix marker for active components and cables E.15

Dust caps E.17

Functional electronics: surge protection E.18

Functional electronics: switch-mode power supplies E.21

Cabtite cable entry system E.28

Ac

ce

sso

rie

s

E

E.2

Introduction

Overview of accessories

Like with other products from Weidmüller, choosing a

Weidmüller accessory means you can obtain everything from

one source.

Cable tester

... for detecting transmission errors

in a network

Tools

... for pressing conductors into

IDC terminals and pressing RJ45

contacts

Tool case

for assembling

Dust-protection plugs

for protecting empty ports

STEADYTEC® variants

SlimFix marker for active components and cables

... for identifying conductors, plugs

and devices

Cabtite cable entry system

System-based cable entry

Functional electronics: surge protection

... for protecting your network against

transient interference

mounting

Functional electronics: switch-mode power supplies

... for supplying power to your

network

Ac

ce

sso

rie

s

E

E.3

Hydraulic hole punch

Technical dataMaximum steel-sheet punching performance

Round holes up to Ø 85 mm

Round holes up to

Square holes up to

Rectangular holes up to

Maximum stainless-steel-sheet punching performance

Round holes up to

Tool data

Length / width / height mm

Weight kg

Punching force

Max. operating pressure bar

Including accessories (contents)

Information

Ordering dataVersion

Information

IE-KO-HAT

thanks to the three-way splitting

IE-KO-HAT2

2

2

2

2

75

1 spacer nut set (3-part)

1 bridge

Type Qty. Order No.

1 1966810000

Tools

Custom stamp for Industrial Ethernet Type Description Dimensions Qty. Order No.

connections 1 1966780000

1 1966790000

Custom shape for RockStar® 1 9204790000

Ac

ce

sso

rie

s

E

E.4

Cutting tools

Technical data

increases the quality of the cuts for smaller

cross-sections

cables, aluminium alloys and hard-drawn copper

conductors!

Max. cutting performance, copper cable

Solid (max. conductor cross-section) mm²/-

Stranded (max. conductor cross-section) mm²/-

Flexible (max. conductor cross-section) mm²/-

Flexible, stranded (max. conductor diameter) mm

Max. cutting performance, aluminium cable

Stranded (max. conductor cross-section) mm²/-

Stranded (max. conductor diameter) mm

solid mm²

Data / telephone / control cable

Max. outer diameter mm

Tool data

mm

Weight g

Note

max. 8 mm

max. 16 mm2

max. 16 mm2

max. 16 mm2

Version

Note

KT 8

Tool closed

Type Qty. Order No.

KT 8 1 9002650000

Ordering data

KT8

8

8

8

Tools

Ac

ce

sso

rie

s

E

E.5

Tools

IE-CST

1- and 2- step stripping in one operation

Stripping tool for round (shielded) data cables

of 2.5...8 mm ø

operation

CST

coaxial & round data cables

2.5 … 8

Type Qty. Order No.

IE-CST 1 9204350000

Type Qty. Order No.

Spare cutter cassette 1 9032020000

AM12

flexible copper cables with a diameter of up to

4 mm2

STP data cables and other round cables with

AM12

8

4

Type Qty. Order No.

1 9030060000

Type Qty. Order No.

Stripping tools

Technical data

Max. cutting performance copper cable

Cable model

Conductor cross-section

Conductor diameter mm

mm

Cutting performance

mm

Flexible copper cable mm2

Tool data

Length mm

Weight g

Information

Ordering data

Information

Accessories

Information

Ac

ce

sso

rie

s

E

E.6

Special stripping tools

Technical data

Max. stripping performance

Cable type

Conductor diameter -

Stripping length, max. -

Tool data

Length mm

Weight g

Note

Ordering data

Version

Note

Accessories

Note

LWL-stripax

Stripping and cutting tool for plastic fibre-optic

cables with 1-mm diameter inner conductor

stripping

M-D-STRIPAX LWL

...1

7.5

135

Type Qty. Order No.

1 9003750000

Type Qty. Order No.

Spare stripping blades 1 9003760000

Tools

Ac

ce

sso

rie

s

E

E.7

Insertion tool for twisted-pair cable

Technical data

For connecting twisted-pair cable to terminal

rails with IDC contacts e. g. in main and floor

structured building cabling.

mm

Weight g

Note

Version

Note

Note

PDT IE-FISP-V4

Type Qty. Order No.

1 9013970000

Type Qty. Order No.

2 9204370000

(without blade)

Type Qty. Order No.

1 9014050000

1 9013960000

1 9013990000

1 9013980000

1 9014000000

Type Qty. Order No.

Ordering data

PUNCH DOWN TOOL PDT

142

Fixing tool

115 / 28 / 28

21

Accessories

The punch-down tool has the following features:

Krone (Standard and scissors cutting function)

incision with cutting off of remaining conductor

Fastening tool for the hexagon cap nut from

STEADYTEC®

Tools

Ac

ce

sso

rie

s

E

E.8

Tools

Ordering data

Type Qty. Order No.

1 9205130000

Technical data

Weight

Ordering data

Type Qty. Order No.

SEE ESD 125 1 9204750000

Technical data

Weight

Ordering data

Type Qty. Order No.

1 9204760000

Technical data

Weight

Ordering data

Type Qty. Order No.

1 9204770000

Technical data

Weight

Ordering data

Type Qty. Order No.

1 9205140000

Technical data

Weight

Ordering data

Type Qty. Order No.

1 9205150000

Technical data

Weight 78 g

Ordering data

Type Qty. Order No.

1 9205210000

Technical data

Weight 547 g

SEE ESD 120

Electronic ESD diagonal-cutting pliers with

pointed head

SEE ESD 125

Electronic ESD diagonal-cutting pliers with

oval head

FZE ESD 130

Electronic ESD flat-nosed pliers

SZE ESD 130

Electronic ESD Snipe-nosed pliers

SVSE ESD 130

Electronic ESD angle -cutting pliers

SUPER CUT

Electronic diagonal-cutting pliers

KOF SET ESD

Electronic ESD case set

Contents:

Ac

ce

sso

rie

s

E

E.9

Pressing tools

Technical data

connectors

operation

Description of contact

Tool data

Length mm

Weight g

Note

Version

Note

Ordering data

TT 8 RS MP 8

For 8-pole shielded RJ45 plug

AWG 27...24

TT 8 RS MP 8

8

255

1251

Type Qty. Order No.

TT 8 RS MP 8 1 9202800000

Tools

Ac

ce

sso

rie

s

E

E.10

Crimping tools for other contacts

operation

Technical data

Tool data

Length

Weight

Note

Ordering data

Version

Note

Accessories

Note

IE-CT-SC-GOF / IE-CT-LC-GOF

Crimping tools for IP 67 plugs

IE-CT-SC-GOF IE-CT-LC-GOF

Type Qty. Order No.

1 9205320000

1 9205330000

Type Qty. Order No.

1 9205280000

1 9205290000

IE-CT-SC-POF / IE-CT-SC-GOF-P

Crimping tools for IP 67 plugs

connectors

IE-CT-SC-POF IE-CT-SC-GOF-P

Type Qty. Order No.

1 9205340000

1 9205350000

Type Qty. Order No.

1 9205300000

1 9205310000

Tools

Ac

ce

sso

rie

s

E

E.11

Tools

LAN USB

Device for testing

Ethernet cables for:

line interruption

core interruption

short-circuits

examination of the twist

LED display

174 g

Type Qty. Order No.

1 9205400000

Cable tester

Technical data

Functionality

Error display play

External voltage

Testable cable lenght

Supply tery

Connection for core

Weight basic device

Dimensions basic device

Remote box weight

Remote box dimensions

Weight testbox

Dimensions testbox

Ordering data

Note

Accessories

Note

IE-CT

Device for testing

Ethernet cables for:

interference voltage

line interruption

core interruption

short-circuits

crossed wires

examination of the twist

7-segment display

RJ45

185 g

31 g

Type Qty. Order No.

IE-CT 1 8808420000

Ac

ce

sso

rie

s

E

E.12

Tool case

Assembly case for fibre-optic connectors

you to assemble fibre-optic cables on-site.

Contents:

Crimping pliers for ST and SC plugs

Kevlar shears

Stripping tool for cable sheath and primary coating

Stripping tool for secondary coating

Fluorescent light with pluggable adapter

Polishing and cleaning fluid

Cleaning cloths

Cleaning rod

Polishing base support for pre-polishing and surface finishing

Polishing foils

Sapphire stylus

Ordering data

Type Qty. Order No.

1 1032030000

Accessories

Type Qty. Order No.

1033350000

1033360000

Ac

ce

sso

rie

s

E

E.13

Inkjet printer

outside, it is packed full of advantageous product features

that guarantee money savings and increased efficiency on the

inside.

A detailed look at the new PrintJet PRO

Cutting-edge technology Reliability as standard

The right choice for safety Ease of use

Ac

ce

sso

rie

s

E

E.14

Inkjet printer

The PrintJet PRO

electric connectivity. These markers can be used

for clear equipment identification on devices,

cables and connectors. The labelling makes

servicing, maintenance and troubleshooting much

easier. Water-based ink is used for the black or

spot colour printing. The print is crystal clear and

resistant to environmental influences.

The PrintJet PRO prints plastic markers in

MultiCard format. In combination with the

userfriendly M-Print® PRO software and the

attached loader, the printer becomes an essential

used, the subsequent fusing, as well as the printer

cartridge and ink have all been specially adapted

by Weidmüller for industrial use. The printer has

excellent long-term use capabilities, thanks to its

integrated loader.

PrintJet PRO

Technical data

PrintJet PRO

Type

Prints MultiCard markers

Technology

Print quality

Printer drivers Windows®

Print software M-Print®

System requirements Windows®

Feed Integrated loader

Fusing Thermal fusing

Interface

Power supply

Location

Weight 33 kg

Cartridge system

Scope of supply PrintJet printer, power cable, printer drivers, manuals (CD),

®

Ordering data PrintJet PRO

Type Order No.

1024050000

1001180001Accessories

Ink tank starter set, black 1027090000

Ink tank starter set, colour 1027110000

1027040000

Ink tank Cyan 1027050000

Ink tank Magenta 1027060000

Ink tank Yellow 1027070000

Ink tank fluid 1027080000

Ink tank PrintJet II 1858920000

1858950000

Ink tank PrintJet 1797460000

4062150000

Ac

ce

sso

rie

s

E

E.15

Markers for active and passive components

Markers for WaveLine components

For all Industrial Ethernet WaveLine components

Ordering data

Type Qty. Order No.

1609880000

Note:

Markers for IP67 and SAI components

Ordering data

Type Qty. Order No.

1912130000

Note:

Markers for IE-Line STEADYTEC®

STEADYTEC®

Ordering data

Type Qty. Order No.

1857440000

Note:

Markers for cables and wires

Ordering data

Type Qty. Order No.

1689470001

1730560001

Note:

Ac

ce

sso

rie

s

E

E.16

Cable markers and STEADYTEC®

TM-I for pre-assembled M12 cables

MultiCard markers for labelling transparent M12 TM-I sleeves

Ordering data

Type Qty. Order No.

1718431044

Note

AccessoriesType Qty. Order No.

Note:

LM MT DIN A5 for IE-Line STEADYTEC®

Cable labels made from polyester:

Ordering data

Type Qty. Order No.

white 1964070000

grey 1964080000

orange 1964090000

blue 1964100000

yellow 1964110000

green 1964120000

Note

AccessoriesType Qty. Order No.

Marking pen STI-Stift SW 0508401694

Note: self-adhesive, for labelling or printing

Ac

ce

sso

rie

s

E

E.17

IE-DPC

Dust Cap RJ45

Type Qty. Order No.

IE-DPC 8813490000

Dust-protection plugs for protecting empty ports


Ordering data

Note

Dust caps

IE Line with STEADYTEC®


Type Qty. Order No.

1965690000

1965700000

1963890000

1963900000

1963690000

1665750000

1058280000

1058310000

Ac

ce

sso

rie

s

E

E.18

Surge protection modules

This catalogue lists a small selection of surge protection and

power supply products chosen from the functional electronics

portfolio.

The complete offering of analogue signal converters, relays,

optocouplers, power supplies, surge protectors, fieldbus

components and interface units is listed in Catalogue 4

„Functional Electronics“.

Functional electronics

Ac

ce

sso

rie

s

E

E.19


DME 100Tx-4RJ

Ethernet Cat.5

Ω

≤ 5 ns

yes

no

yes

Miscellaneous

RJ45

RJ45

51 x 47 x 22

Type Qty. Order No.

1 8738780000

DME 100Tx-4RJ TS 35

Ethernet Cat.5

Ω

≤ 5 ns

yes

no

yes

Miscellaneous

RJ45

RJ45

Type Qty. Order No.

1 8830230000

Cat.5 surge protection

Technical data

max

Response time

Suppression diodes

Design

Type of connection

Storage temperature

Dimensions

Clamping range (rating- / min. / max.) mm2


Note

Ordering data

Version

Note

Accessories

Note

Ac

ce

sso

rie

s

E

E.20


JPOVP Cat.5 M12

Ethernet Cat.5

1

2

3

4

M12

SPD

SPD

1

2

3

4

M12

IN OUT

≤ 5 ns

III

2

D-coded

CE

Each cable 1.5 m long

Type Qty. Order No.

Cat5 1 8805570000

Retaining clip

JPOVP Cat.6 IP20

Ethernet Cat.6

1

2

3

4

SPD

SPD

1

2

3

4

IN OUT

RJ45RJ45

≤ 5 ns

III

2

CE

Each cable 1.5 m long

Type Qty. Order No.

1 8805550000

Retaining clip

JPOVP Cat.6 IP67

Ethernet Cat.6

1

2

3

4

SPD

SPD

1

2

3

4

IN OUT

RJ45RJ45

≤ 5 ns

III

2

CE

Type Qty. Order No.

1 8805560000

Retaining clip

1-stage overvoltage

protection

The overvoltage protection is

plugged in to protect the sensitive

electronics in the signalling circuit.

The suppression circuit with varistor

suppresses the induced voltage in

solenoid valves.

The PE connection leaves the

housing via a separate line. The

green/yellow earthing cable must

be connected to the system east

to ensure reliable discharge of

interference pulses.

Technical data

Rated voltage

DC response voltage

Response time

Rated current

Protection level, signal line, wire to wire/PE

Protection level, supply, wire to wire/PE

General data

Pollution severity

Type of connection

Maße


Note

Ordering data

Version

Note

Accessories

Note

Ac

ce

sso

rie

s

E

E.21

Switch-mode power supply units

CP SNT 24 W 24 V 1 A

+L

Thermistor

24 W

Surge / thermal cut-out

Screw connection

Type (Qty.=1) Order No.

9928890024

connectPower single phase

INSTAPOWER

W H

L

Technical data

Input

Input voltage

Input current

Input frequency

Making current limit

Input fuse

Surge protection

Output

max. output power

max. residual ripple

Surge protection

Mains failure bridge-over time

max. capacitance at output

Insulation coordination

Electrical isolation, output-earth

Electrical isolation, input-earth

Electrical isolation, input-output

General data

Storage temperature

Degree of efficiency at max. load

Standards

EMC standards



Note

Ordering data

Note

Accessories

Note

Ac

ce

sso

rie

s

E

E.22



+L

yes

48 W

ss

konst of max. output power,

automatic restart

Screw connection

Type Qty. Order No.

1 8739140000


INSTAPOWER

W H

L

Technical data

Input

Input voltage

Input current

Input frequency

Making current limit

Input fuse

Surge protection

Output

max. output power


Surge protection


max. capacitance at output





General data

Storage temperature


Standards

EMC standards



Note

Ordering data

Note

Accessories

Note

Derating curve

0 10 20 30 40 50 60 70 80

3

2.5

2

1.5

1

0.5

0

Ambient temperature (°C)

Cur

rent

(A)

Ac

ce

sso

rie

s

E

E.23



Feedback

OVP, OTP

Output Current

Check & Share

current control

EMC Rectifier

Filter Flyback

Converter

OutputRecctifier

& Filter Vin AC

Signal Relay

1114

12

Vout DC

72 W

ss


automatic restart

recommended with diode module

green LED

on mounting rail TS 35

Clearance: above/below ≥ 3 cm

Screw connection

For redundancy operation or to maintain the alert function, only

operate with diode module.

Type Qty. Order No.

1 8708660000


ECOLINE

L W

H

Technical data

Input

Input voltage

Input current

Input frequency

Input fuse

Surge protection

Output

max. output power


Surge protection


Parallel connection option

Status relay / Change-over contact





General data

Storage temperature


Status indication

Standards

EMC standards

Installation advice

Weight



Note

Ordering data

Note

Accessories

Note

Derating curve

0 10 20 30 40 50 60 70 80

4

3.5

3

2.5

2

1.5

1

0.5

0


Cur

rent

(A)

Ac

ce

sso

rie

s

E

E.24


CP SNT 120 W 24 V 5 A

VIN AC VOUT DCEMC &

FilterRectifier

& Filter

Forward

ConverterOut Rectifier

& Filter

PWM

Controller

Photocoupler

Photocoupler

Voltage

feedback

OVP

Signal

Relay

12

1411

ss


automatic restart


green LED



Screw connection



Type Qty. Order No.

1 8708670000


ECOLINE

L W

H

Technical data

Input

Input voltage

Input current

Input frequency

Input fuse

Surge protection

Output

max. output power


Surge protection








General data

Storage temperature


Status indication

Standards

EMC standards

Installation advice

Weight



Note

Ordering data

Note

Accessories

Note

Derating curve

0 10 20 30 40 50 60 70 80

6

5

4

3

2

1

0


Cur

rent

(A)

Ac

ce

sso

rie

s

E

E.25


CP SNT 250 W 24 V 10 A

VIN AC VOUT DC

Signal

Relay

12

1411

FeedbackPhotocoupler

EMC

Input

Rectifier

& Filter

Forward

Converter

Output

Rectifier

& Filter

PWM

Control

ss


automatic restart


green LED



Screw connection



Type Qty. Order No.

1 8708680000


ECOLINE

L W

H

Technical data

Input

Input voltage

Input current

Input frequency

Input fuse

Surge protection

Output

max. output power


Surge protection








General data

Storage temperature


Status indication

Standards

EMC standards

Installation advice

Weight



Note

Ordering data

Note

Accessories

Note

Derating-Kurve

0 10 20 30 40 50 60 70 80

12

10

8

6

4

2

0

Umgebungstemperatur (°C)

Str

om (A

)

Ac

ce

sso

rie

s

E

E.26


CP SNT 500 W 24 V 20 A

VIN AC VOUT DC

Signal

Relay

12

14

11

EMI

Input

Rectiefier

& Filter

Forward

Converter

Output

Rectifier

& Filter

PWM Feedback

ss


automatic restart


green LED



2 kg

Screw connection



Type Qty. Order No.

1 8778870000


ECOLINE

L W

H

Technical data

Input

Input voltage

Input current

Input frequency

Input fuse

Surge protection

Output

max. output power


Surge protection








General data

Storage temperature


Status indication

Standards

EMC standards

Installation advice

Weight



Note

Ordering data

Note

Accessories

Note

Derating curve

0 10 20 30 40 50 60 70 80

30

20

10

0


Cur

rent

(A)

Ac

ce

sso

rie

s

E

E.27


CP SNT 1000 W 24 V 40 A

VIN AC VOUT DCEMC &

FilterRectifier

& Filter

Forward

ConverterOut Rectifier

& Filter

PWM

Controller

Photocoupler

Photocoupler

Voltage

feedback

OVP

Signal

Relay

12

1411

ss


automatic restart


green LED

on terminal rail TS 35


4.4 kg

Screw connection



Type Qty. Order No.

1 8862780000


ECOLINE

L W

H

Technical data

Input

Input voltage

Input current

Input frequency

Input fuse

Surge protection

Output

max. output power


Surge protection








General data

Storage temperature


Status indication

Standards

EMC standards

Installation advice

Weight



Note

Ordering data

Note

Accessories

Note

Derating curve

0 10 20 30 40 50 60 70 80

50

40

30

20

10

0


Cur

rent

(A)

Ac

ce

sso

rie

s

E

E.28

Cabtite cable entry system

HDC KT ...

Cable grommets, small

Technical data

Material, grey free from elastomers, halogens and silicone

Material, black elastomers with very high chemical resistance

Temperature range

Ordering data

Type Clamping range [mm] Qty. Order No. Order No.

grey black

1826480000 1827810000

1826490000 1827830000

7-8 1826500000 1827840000

1826510000 1827850000

Blanking plugs, small

1828170000 1828200000

KVT 32

KVT 32 and locknut for D-Sub 9

Technical data

Material Polyamide, free from halogens and silicone

Class of protection IP54, when the correct cable grommet is selected

Temperature range

Ordering data

Type Thread For grommet Qty. Order No. Order No.

small large white black

M 32 x 1.5 1 - 1826670000 1828270000

Locknut for D-Sub 9

M 32 x 1.5 1828250000 1828300000

Note: Please refer to catalogue 5 for the complete range.

HDC KEL 16

Cable entry strip

4 small grommets

Snap frame

Technical data

Material Polyamide, halogenfree, siliconfree

Colour black

Temperature range

Ingress protection class IP 54, when correct cable grommet is used

Ordering data

Type No. of grommet positions Order No.

small large Qty. black

8 1825910000

4 1825900000

Blanking plugs, small

1827770000

Contents Industrial Ethernet Introduction Active ... · WaveLine switches ECO-Line switches...

Documents

Transcript of Contents Industrial Ethernet Introduction Active ... · WaveLine switches ECO-Line switches...