1 | P a g e

Since 2000, C&E Industrial Services Inc. has delivered unmatched value

in providing services and superior craftsmanship on every project

undertaken. By placing expert construction and industrial

professionals on every project, C&E has expanded its business across

the southwestern part of the United States. C&E is a women, minority

owned small business.

C&E is dedicated to provide quality, professional services in an

assorted range of project types. Specializing in industrial welding,

plumbing, heating, ventilation, air-conditioning, and insulation, C&E

has branched out to incorporate civil, architectural, structural,

industrial, and commercial construction.

C&E’s ownership brings over 30 years of industrial and commercial

experience to the construction industry. With our continued

commitment to safety in the general construction industry, C&E

provides OSHA Compliance, and life safety services.

Whether our clients are in the private or public sector, they experience

a consistent relationship with C&E. Our successful track record has

been instrumental in building trust and lasting business relationships.

Working as a team, we meet and exceed all customer expectations. We

have never stopped evolving with our customer’s needs. C&E is a

reliable and trustworthy company, C&E implements all resources

required to complete projects on time and on budget by enforcing

safety as our #1 Priority.

Contents Company License Classifications 2

Good and Service Classifications 4

Industrial Pipe & Structural Welding 5

Commercial HVAC & Plumbing 6

Commercial Construction & Renovation 7

Industrial Services 8

Scaffold and Industrial Insulation 9

Solar Panel Design and Installation 10

Heat Treat Services 11

Guarantee 12

C&E Industrial Services, Inc.

103 Maguey Ct. Sunland Park, NM 88063

Phone: 575.997.0190

Fax: 575.997.9040

www.ceindust.com

2 | P a g e

NEW MEXICO CONSTRUCTION CLASSIFICATIONS

Qualifying Party Name Classification Status

Isidro R. Valles GB98, MM98, GF09, LP04, MHDMM98 Active

Business Certifications

SBA Certified Small Disadvantaged Business

New Mexico Workforce Registration No.: 021632201225

ASME U-Stamp Welding Certification No. 35,443

ASME S-Stamp Welding Certification No. 35,444

The National Board R-Stamp Welding Certification No. R-6164

GENERAL CONSTRUCTION CLASSIFICATIONS

GB-98 Contractor may bid and contract as the prime contractor of a project that involves work authorized by the GB-98 license classification, regardless of the percentage of work in the mechanical/plumbing and/or electrical trades. The work outside the scope of the prime contractor’s license classification(s) must be subcontracted to an entity validly licensed in the appropriate classification(s). A GB-98 contractor may not bid and contract as the prime contractor of an entire project if the major portion of the work to be performed, based on dollar amount, is covered by the scope of any GA or GF classification.

GF-9 Utility lines (sewage, natural gas and underground telephone cables). Requires two years’ experience Construct, install, alter or repair utility lines for the transmission of sewage, natural gas and water, including excavating, grading, trenching, boring, shoring, backfilling, compacting, paving and surfacing. Construct, alter, or repair treatment plants and facilities incidental thereto. Install direct burial telephone or data cable and vaults as directed by the telephone utility. May not perform installation of electrical raceways, splicing, termination, installation of load pots, overhead cabling work, or other activities considered under the scope of the ES-7, EL-1or EE-98 electrical classifications.

3 | P a g e

MM-98 Mechanical Requires four years’ experience. Requires licensure in classifications MM-1 through MM-4 and covers all work described in these classifications, as well as work described in the MS-3, MS-6, MS-12 and MS-14.

Residential and commercial (a) MM-1 Plumbing- Requires four years’ experience. Install, alter, repair and service plumbing fixtures, and piping, including pneumatic or electric controls and control wiring not greater than 24 volts, concrete supports, and excavating, trenching and backfilling. Includes hot water heating systems not exceeding 30 p.s.i. or 400,00 b.t.u./hour input; piping for fuel, oil and gasoline and for solar energy systems; septic tanks, manholes and sewer lines; irrigation sprinkler systems; swimming pools and spas. Does not include installation of natural gas fired appliances or natural gas piping. (b) MM-2 Natural gas fitting- Requires four years’ experience. Install, alter, repair and service natural gas piping and fittings and incidental controls and control wiring, pneumatic control systems, excavating, trenching and backfilling. Includes installation of hot water systems exceeding 30 p.s.i. or 400,000 b.t.u./hour input; steam and hot water boilers; and warm air heating systems such as chimney connections, flues, refractories, burners, fittings valves, thermal insulation, accessories and incidental piping; warm air appliances and other listed gas appliances. May not install LP Gas systems. (c) MM-3 Heating, ventilation & air conditioning (HVAC) - Requires four years’ experience. Install, alter, repair and service HVAC air handling and refrigeration equipment and piping, including fans, coils, condensing units, self-contained packaged air conditioning and/or heating units, evaporative cooling units, solar energy systems, ductwork and pneumatic tube systems. May connect water to existing valved outlets, and install controls, and control wiring not to exceed 24 volts. May bid and contract for structural alterations, painting, electrical wiring and other work incidental to this scope of work, provided such work is performed by a properly licensed contractor. (d) MM-4 Heating, cooling and process piping- Requires four years’ experience. Install, alter, repair and service hydronic heating, cooling and process piping for steam hot water systems of any temperature pressure range, chilled water systems, condensing water systems and process piping systems. Includes pressure vessels, heat exchangers, boilers, refrigeration water chillers, cooling towers, fuel oil tanks and fuel oil piping, and pneumatic or electric controls and control wiring not to exceed 24 volts. Install high pressure and process piping solar energy systems of any temperature or any pressure conveying gas or fluids other than potable water, and pneumatic tube systems. Specialty classifications: (a) MS-3 Septic tanks & sewer- Requires two years’ experience. Install, alter, repair or service septic tanks and systems, manholes and sewer lines, starting at a point five (5) feet beyond the outside wall of a building and ending at a connection to a public or private utility. May excavate, trench, backfill and grade as necessary, and install or repair plug- in type electrical control panels, controls and control wiring not to exceed 24 volts. (b) MS-6 Lawn sprinklers- Requires two years’ experience. Install, alter, repair or service sprinkler systems which are connected to a potable water supply. May excavate and backfill as necessary and install or repair plug-in type electrical control panels, controls and control wiring not to exceed 24 volts. (c) MS-12 Fire protection sprinkler systems- Requires four years’ experience. Install alter, repair or service fire protection systems using water, including any pressure or storage tanks required, controls and control wiring up to 24 volts. May excavate and backfill and install piping from structure to off-premise water supply adjacent to property involving a fire protection system. May bid or contract for structural alterations, painting, electrical wiring, etc., incidental to the system installation, provided such work is performed by a properly licensed contractor. (d) MS-14 Dry chemical fire protection- Requires four years’ experience. Install, alter, repair or service fire protection systems using gas or chemical, including CO, clean agent. Includes pressurized storage tanks, valves, temperature sensing devices and other incidental control wiring up to 24 volts. May install solenoid or shut-off valve devices in these systems. May bid or contract for structural alterations, painting, electrical wiring, etc., incidental to the system installation, provided such work is performed by a properly licensed contractor.

4 | P a g e

GOODS/ SERVICES

NAIC CODES (North American Industry Classification System)

236210 Industrial Building Construction

236220 Commercial and Institutional Building Construction

237110 Water and Sewer Line and Related Structures Construction

237120 Oil and Gas Pipeline and Related Structures Construction

237310 Highway, Street and Bridge Construction

237990 Other Heavy and Civil Engineering Construction

238110 Poured Concrete Foundation and Structure Contractors

238120 Structure Steel and Precast Concrete Contractors

238130 Framing Contractors

238140 Masonry Contractors

238220 Plumbing, Heating and Air-Conditioning Contractors

238310 Drywall and Insulation Contractors

238320 Painting and Wall Covering Contractors

238330 Flooring Contractors

238350 Finish Carpentry Contractors

238910 Site Preparation Contractors

238990 All Other Specialty Trade Contractors

331210 Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

332322 Sheet Metal Work Manufacturing

332410 Power Boiler and Heat Exchanger Manufacturing

332911 Industrial Valve Manufacturing

332919 Other Metal Valve and Pipe Fitting Manufacturing

332996 Fabricated Pipe and Pipe Fitting Manufacturing

332999 All Other Miscellaneous Fabricated Metal Product Manufacturing

333415 Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial

Refrigeration Equipment Manufacturing

333992 Welding and Soldering Equipment Manufacturing

SIC (Standard Industrial Classification) 1541 Industrial Building and Warehouses

1629 Heavy Construction, NEC

1711 Plumbing, Heating, Air-Conditioning

3444 Sheet Metal Work

7349 Building Maintenance Services, NEC

7692 Welding Repair

5 | P a g e

Industrial Pipe and Structural Welding

Certifications include R-Stamp, S-Stamp, U-Stamp, and NB Stamp.

C&E Industrial Services Inc. has an excellent team of certified

industrial welders and pipe fitters prepared to arrive on-site ready

for any situation. Our quality control professionals will inspect the

project to insure all specifications and procedures are met and

followed.

C&E welding complies with the Jurisdictional Authority, ASME, and

The National Inspection Code. With a Quality Control System for

repairs and alterations, our workforce can be set up on-site

immediately.

C&E has welders with certifications in a variety of different

welding procedures

Certified SMAW and GTAW Welders

Specialty Boiler Tube and Hot Spot Repairs

We are certified for repairs and or alterations to Pressure

Retaining Items (PRI) by the National Inspection Code.

We also fabricate and install piping with our proficient certified

pipefitters

Specializing in Welding Our Welders are certified and tested to comply with ASME & NIC regulations for welding a variety of different metals and alloys:

∙Carbon Steel- Tig & Stick ∙Hastelloy ∙Stainless Steel- Tig & Stick ∙2- ¼, 5, 9 Chrome ∙Alloy 20 ∙Temper Bead Certified ∙Inconel ∙Plate

6 | P a g e

Commercial Industrial HVAC and Plumbing

C&E Industrial Services, Inc. is a highly qualified commercial HVAC

and plumbing contractor. We fabricate and install hundreds of

lineal feet of ductwork and fittings in every job. Utilizing only the

most qualified and licensed professionals, C&E will bring even the

oldest buildings into compliance.

Our HVAC Construction Services include:

Chiller Install, Start-up & Commissioning

Boiler Install, Start-up & Commissioning, and Retrofit &

Repairs

Air Handling Units, Start-up & Commissioning

Sheet metal fabrication

Duct Supports

Our Plumbing Construction Services Include:

Hot Tapping Services

Sanitary piping

Oil/grease interceptors

Roof drainage systems

Gas piping

Process piping

Hot & cold water piping

Steam & chill water systems

Customized Duct

Fabrication

Our sheet metal crew will

customize your ductwork

to fit your specific needs.

Whether you’re replacing

your old unit or

modifying an existing

design, C&E can get your

unit up and running in a

timely manner.

7 | P a g e

Concrete and Earth Moving Services C&E Industrial Services, Inc. is committed to on performing quality work

on all projects. Specializing in placing concrete foundations for buildings,

mechanical equipment, sidewalks, curbs, retaining walls, stem walls,

culverts, and drainage ditches. Our professional craftsmen will level

surfaces, set forms, pour and finish concrete to match any specification.

No job or service is so urgent that it cannot be performed safely………….

Commercial Construction and Renovation C&E has performed general contracting services for multiple private and public

entities. With continued and active contracts with NASA White Sands Test Facility,

White Sands Missile Range, El Paso Electric, Co. C&E deploys trained, competent and

experienced management and craftsmen to every project to provide a finish product

of unparalleled quality.

Finishing projects on time and on budget, C&E adapts to any and all project

. demands. Our professional craftsmen and management professionals will work under

even the most difficult circumstances. We perform full renovations under full

occupation.

NASA White Sands Test Facility

Area 400 Revitalization

The NASA White Sands Test Facility revitalization of Area 400 encompassed a total

of four buildings. We have completed these projects which include the 400 Block

House, Technicians Work-Shop, and Altitude Control/Support Buildings. Work

included complete restroom remodels, sewer system replacement, computer access

flooring, architectural work, VCT flooring, HVAC and electrical upgrades. The entire

project was undertaken during full occupancy.

Area 100 Revitalization

The NASA White Sands Test Facility revitalization project of Area 100 covered a total

of eight buildings. Sizes of buildings range from 1200 square feet to 20,000 square

feet. Complete remodels of these buildings were undertaken during full occupation.

C&E worked nights and weekends to minimize interruptions to facility operations.

We performed complete restroom remodels, sewer system replacement, computer

access flooring, architectural work, VCT flooring, HVAC and electrical upgrades.

8 | P a g e

Industrial Services C&E offers a full range of services in the industrial industry. We provide

complete maintenance for power plants. Our valued clients include

Sterigenics, Georgia Pacific, PNM Afton Generating Station, North

American Energy Solutions, El Paso Electric, and El Paso Water Utilities

and others.

We perform services including, but not limited to, Pipe Fitting, Rigging,

Insulation, Concrete Work, Scaffolding, Welding, Painting, Metal

Buildings, Awnings, Earthwork, Rip-rap, and any other requested

service.

One benefit of utilizing C&E is that we are a one stop shop. We can be

mobilized within minutes and on-site within hours. Our emergency

response team is available 24-hours a day, 7-days a week.

Confined Space Attendants

C&E Industrial Services Inc. has

certified air monitoring and

confined space attendants.

Utilizing the most up to date gas

monitoring equipment, we identify

permit-required confined spaces

and their hazards. Subsequent to

identifying these hazards, C&E

certified attendants set up proper

ventilation, perform LOTO of any

necessary equipment, and perform

non-entry rescue duties. All

training is in accordance with

Federal OSHA, applicable State-

Charted OSHA, and other State

Regulations and local Ordinances.

9 | P a g e

Scaffolding Services Our certified scaffold personnel

are available 24-hours a day,

seven days a week.

All equipment is inspected by

competent personnel daily.

Industrial Insulation Installation

Whether seeking energy conservation, temperature control, sound proofing,

or protection from the elements, our experienced personnel specialize in

resourceful problem solving and innovative systems. Our professional

insulators will custom fit insulation and weatherproof jacketing for optimal

performance. We also custom fabricate insulated blankets to fit any

application.

Whether it be HVAC ductwork or high temperature steam lines, our custom

designs and innovative techniques allows us to customize any project.

10 | P a g e

Solar Panel Design and Installation

Pictured

• Forward Operating

Base in Antelope Wells,

New Mexico

• Renewable Energy and

Hot Water Production.

Antelope Wells Forward Operating Base

C&E Industrial Services, Inc. broke new ground in installing the solar panel array at the Forward Operating Base located in Antelope Wells, NM. The project consisted of both hot water and energy production.

The energy production side of the project consisted of the installation of a total of 30 panels. These were laid out in four arrays, three rows of eight and one row of five. The total accumulated power available from this array is 38.64 kW.

The hot water production side of the project consisted of a three collector configuration with a 120 gallon capacity. The single wall heat exchanger provides up to 70% of the energy required for water heating directly from the sun. The heat is transferred from the heating medium to the usable water through the heat exchanger.

“I’d put my money on

the Sun and Solar

Energy, what a source

of Power.” –Thomas

Edison

Design and Engineering

C&E Industrial Services, Inc. works closely with our suppliers and engineers to design renewable energy systems to customer requests and requirements. Whether it be residential or utility, our professional staff can guide you through the design and construction phase of the project.

From start to finish, our management staff is proactive in every facet of the project. C&E industrial Services manages, coordinates and supervises the construction process from the

conceptual development stage through final construction. We supply all our

customers with the following management services:

Schedule Control

Cost Control

Scheduling

Safety

Design/Bid/Build

Inspection & Quality Control

Project Construction

Hot Water Production Panels.

11 | P a g e

Pictured

A chrome pipe Preheated while welding

Both services performed in- house

Preheating and Post Weld Heat

Treating are now services that

we offer.

Heat Treat (pre and post weld)

Services

C&E Industrial Services, Inc. Heat Treat team is ready to work in Refineries, Petrochemical plant, Gas plants, Oil fields, Mines, Power generating plants (nuclear, fossil and hydro), Metal processing and fabrication shops.

Offering services for Preheating and stress relief of piping, Pressure vessels and fabrication, as well as shop heat treating for new construction, plant maintenance and fabrication.

Mission

C&E Industrial Services Inc. strives to offer the best heat treating services at competitive rates, with a knowledgeable and professional staff. By utilizing the right equipment, we can achieve the highest level of quality and complete projects safely and on-time. We do this through the continuous training of our personnel and by taking advantage of the latest technological advances in control equipment.

Our goal is simple: Provide a workplace where production and quality are

second only to safety

12 | P a g e

C&E Industrial Services, Inc. 103 Maguey Ct.

Sunland Park, NM 88063

575-997-0190

Fax: 575-997-9040

ceoffice@ceindust.com

Find us on the Web: www.ceindust.com

Our Guarantee

C&E Industrial Services Inc. is committed to providing a safe and

healthful work environment for all our employees and others that

may work visit or enter our facilities. It is our policy to manage

and conduct operations and business in a manner that offers

maximum protection to each and every employee and any other

person that may be affected by our operations and business.

Our Pleasure

C&E is dedicated to fortify our partnerships to benefit our

companies mutually. Attention to detail - understanding that an

accurately placed weld will save our customers’ time and expense

~ensuring that we provide superior craftsmanship. C&E looks

forward to working with your company to develop a constructive

and rewarding relationship.

Our vision is to be a recognized performance leader within the

construction industry. We want to achieve operational

excellence with industry-leading customer satisfaction and

superior safety performance.