S.No. Subject Title

1. Electronic Devices

1 Metal semiconductor and semiconductor Heterojunctions

2 Schottkey barrier diode3 Heterojunctions4 MESFET

2. Circuit Theory

1 Flirters and attenuators2 Concept of design and analysis of filters3 Synthesis of RLC Circuits4 Attenuators

3. Digital Electronics

1. Totem-poll2. General Purpose IC’s 74/45 Series3. Realization of RAM4. Design of digital system and components5. Timing simulation

4. Signals and Systems

1. The magnitude and phase representation of Fourier Transform

2. Discrete time LTI systems3. Analysis of discrete time LTI systems using z-

Transform

5. Electronic Circuits- I

1. Analyze and design multistage electronic Circuits2. Difference between discrete and integrated biasing

techniques3. Difference between small signal and large signal

Amplifiers

6. Electronic Circuits II

1. Tuned Oscillator2. E-MOSFET Amplifier3. JFET CS Amplifier4. Field Effect devices based circuit analysis5. Multistage analysis and Frequency Analysis of

Amplifiers

7.Communication Theory

1. Demodulation and spectrum of PAM, PWM, PPM.2. Pre-emphasis and De-emphasis circuits.3. Frequency discriminator and phase discriminator.4. Small Sacle Fading And Multipath Propagation.

8.Electromagnetic Fields

1. Time Varying Electric And Magnetic Fields .2. Application Of Static Fields And Computational

Methods. 3. Static Magnetic Fields.

9.Linear Integrated Circuits

1. Ideal Open-Loop and Closed-Loop Operation of Op-Amp.

2. Frequency response of Non-compensated Op-Amp.3. Log and Antilog Amplifier

10.Digital Communication

1. Analog Pulse Modulation2. Demodulation and spectrum of PAM, PWM, PPM3. Pass band Data Transmission.4. Error Control Coding.5. Spread Spectrum Modulation

11. Principles of Digital Signal Processing

1. Motorola DSP 56000 family.2. Comparison of FPGA & DSP for real time

application.3. recent trend in TMS.

12.Transmission Lines and Wave Guides

1. Waves between parallel planes of perfect conductors.2. Line At High Frequencies.3. Distortion less transmission line.

13.Microprocessor and Microcontroller

1. Assembly language program in 8086 for various applications

2. Various interfacing techniques with 8086 for various applications.

3. Basic concepts of advanced microprocessors. 4. The architecture and software aspects of

microprocessor 8086.

14.Computer Architecture

1. Scheduling And Synchronization.2. Memory Management And File System.3. Linux System.

15. Computer Networks

1. Forward and backward error correction.2. Duties of the Transport layer.3. Asynchronous and Synchronous communications.4. Introduction to WIFI and WI MAX

16. VLSI Design 1. EPROM to realize a sequential circuit.2. FPGA Xilinx 2000.3. Chip level and system level test techniques.

17.Antenna and Wave propagation

1. Effective area of hertizian antenna.2. Loop antenna radiation fields and radiation

resistance.3. Reflection characteristics of earth.4. Analysis of Rhombic antenna.

18. Medical Electronics

1. Patient Monitoring Systems.2. Micro current shock.3. Principle of defibrillator and pace mark.4. Safety standards.

19.RF and Microwave Engineering

1. IV Microwave Vaccum Tube Devices.2. Faraday rotation in ferrite.3. Gyrator.4. Microwave Attenuators.

20.Optical Communication and Networks

1. Losses And Dispersion.2. saturation induced crosstalk.3. wavelength range of operation.4. Applications of Integrated Optics.

21.Embedded and Real Time Systems

1. Interrupt Programming.2. Sensor and other Applications.3. GUI Interface.4. Programming Schedule Mechanism.

22.Satellite Communication

1. Satellite based data networks.2. Multiple access techniques.

23.Advanced Computer Architecture

1. Vision And Task Planning .2. A task-planning problem.

24. Opto Electronic Devices

1. Light coupling to optical fiber.2. Noise effect on system performance receiver

modules.

3. SDH-wavelength routed networks.4. semiconductor optical amplifier.

25.Wireless Communication

1. Diversity and Combining techniques.2. Multiple Acess Schemes And Standards.3. Qkumura model-Hata model.

26. Wireless Networks

1. Electronic Switching.2. Telecommunication Signalling And Traffic.3. Integrated Digital Networks.4. Modems and Relays5. HIPERLANS

5Professional Ethics in Engineering

1. Corporate Social Responsibility as an Engineer.2. UNO

6Total Quality Management

1. SIX SIGMA – Black Belt2. Customer Satisfaction – Case Study

S.No. Semester Laboratory1 II Circuits and Devices Laboratory2 III Analog and Digital Circuits Laboratory 3

IVCircuit and Simulation Integrated Laboratory

4 Linear Integrated Circuit Laboratory 5

VDigital Signal Processing Laboratory

6 Communication System Laboratory 7 Microprocessor and Microcontroller Laboratory8

VIComputer Networks Laboratory

9 VLSI Design Laboratory 10

VIIEmbedded Laboratory

11 Optical and Microwave Laboratory