Contemporary Styled Architectural · PDF fileSize Comparison Chart Page 24 - 25 Paint Colors...
-
Upload
truongngoc -
Category
Documents
-
view
219 -
download
2
Transcript of Contemporary Styled Architectural · PDF fileSize Comparison Chart Page 24 - 25 Paint Colors...
LIGHTINGINNOVATIONS
Contemporary
Styled
Architectural
Luminaire
EURO SERIES
A V A I L A B L E W I T H U N R I V A L E D™ L E D S Y S T E M S
2
Tool- less Gasketed Twist-Lock Access
Optional Photocell(Not Shown)
Tempered Glass Lens
IP66 Sealed
Cut-Off Optic
Post Fitter 4'' Slip Fit
Tool-less Hinged Roof for Ease of Relamping 400 watt max
IP66Model E450FGShown ArchitecturalMedium Bronze
SEALED ROOF OPTIC
Powder Coat Finish with 5 Year Warranty
3
T H E N E W A R C H I T E C T U R A L S T Y L E L U M I N A I R E
SOME FEATURES:
£ Available in multiple light sources including the UNRIVALED™ LED system.
£ Available in both IES Cutoff and Full Cutoff configurations.
£ IP66 classified sealed roof optic available.
£ A complete product family, including bollards and 4 scales of fixtures.
£ Computer designed and engineered optical systems.
£ Optional Indirect T6 available.
£ Types 2, 3 and 5 distribution available, including rotatable optics.
£ Designed for easy installation and tool-less maintenance.
£ Some models available with clear or frosted lens.
£ Some models available with flat or sag glass lens.
EURO SERIESThe EURO Luminaire Series introduces a bold, new look of contemporary
styling for outdoor lighting. Euro fixtures come in four family styles that
include traditional lens style, contemporary down light or indirect lighting.
MA
INT
EN
AN
CE
4
EASY ASSEMBLY AND MAINTENANCE
A D
B C E
The Euro Series fixture has beenengineered to be accessible foreasy tool - less maintenance bymeans of captivated thumb screws.
The hinged roof opens up afterloosening the captive screws.
A. With the roof assembly open, the lamp and/or roof optic is easilyaccessible for maintenance.
B. Captive screws hold the roofoptic and optional ballast securelyin position.
C. The roof optic is removed byloosening captive screws, allowingeasy access to the optional roofballast and to rotate the roof optic if needed.
D. The fitter is provided with a siliconegasketed twist-lock cap for tool- lessaccess to the wiring chamber/ballasthousing.
E. All ballasts are wired with quickdisconnect couplings.
Captive Screws
RoofHinge
Roof Optic
Lamp
CaptiveScrews
Lens
CaptiveScrews
Tool- less maintenance
* For other models consult factory.
The E450 model is shown in the photos*
5
EURO SERIES AT A GLANCE400SERIES
500SERIES
E420 E450 Series E460 Full Lens E470 Indirect E480 E490Page 12 - 13 Page 14 - 15 Page 14 - 15 Page 14 - 15 Page 16 - 17 Page 16 - 17
E520 E550 Series Page 18 - 19 Page 20 - 21
E250 Series E260 Full Lens E270 Indirect E250 BOLLARD E260 BOLLARD E270 BOLLARDPage 6 - 7 Page 6 - 7 Page 6 - 7 Page 22 - 23 Page 22 - 23 Page 22 - 23
E280 Full Lens E290 Glow TopPage 8 - 9 Page 8 - 9 E350 Series E360 Full Lens E370 Indirect
Page 10 - 11 Page 10 - 11 Page 10 - 11
200SERIES
300SERIES
Size Comparison Chart Page 24 - 25
Paint Colors Page 26
E250 /
E260 /
E270
6
13" W
A. Fixture
C. Light Sources
D. Optics
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles PIER MOUNTS (PB)WALL BRACKETS (WB)
ORDERING INFORMATION
E270Indirect
19"
IO32
Indirect Optics Type 3 E270
IO52
Indirect OpticsType 5 E270
450PB
E260CAFull DiffuserClear Acrylic
E260FAFull Diffuser
Frosted Acrylic
E250Roof LEDOptics
V57
Vertical DiffuserType 5 E260
RL3LED Roof Optics Type 3 E250
RL5LED Roof Optics Type 5 E250
171/2"11"
80WB78UWD EU1WB
223/4"
p
p
19"
p
p
19"
p
p
19"
p
p
13" W 13" W 13" W 13" W
23"
p
p
p
p
26"
p
p
30"
p
p
p
p
p
p
20"131/2"
p
pp
p181/2"
12"
p
p
p
p
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentLED Light Emitting Diode
• PEC Photocell -Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120, 277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
PIER FIXTURES EXAMPLEWALL FIXTURES EXAMPLE
E260FA | EU1WB | 100MHP120 | V5 | – | BKT
A B C D E-F G A B
Fixture / Wall Bracket Light Source Ballast Optics Options FinishWatts / Type / Volts
E270 | 450PB
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
NOTES: 1 For medium base or PL lamps in 260 series only. 2 For T6 ballast and lamp only. Ballast remote mounted. 3 Electronic HID ballast drivers. 4 Metal Halide systems are pulsestart. 5 If fuse required FHD should be selected. 6 35HPS is 120 volt only. 7 Recommended for E260FA and E260CA HID or Incandescent. See website for complete specifications and IES files.
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
BALLASTS 4
LAMPS 4
7
• HPS35/MED1
• HPS50/MED1
• HPS70/MED1
• HPS100/MED1
• MHP39/T6 1
• MHP50/MED1
• MHP70/MED1
• MHP70/T6 1
• MHP100/MED1
• PLT261
• PLT321
• PLT421
• PLT571
• PLT701
• PLH601
• PLH85 1
• 35HPS 1, 6
• 50HPS 1
• 70HPS1
• 100HPS1
• 39MHPT1, 3
• 50MHP 1, 3
• 70MHP 1, 3
• 70MHPT 1, 3
• 100MHP 1, 3
• 26PLT 1
• 32PLT 1
• 42PLT 1
• 57PLT 1
• 70PLT 1
• 60PLH 1
• 85PLH 1
• INCAND• LED 5
Uses same information as wall fixture
Fixture / Pier Base
E250 / E260 / E270
*Smooth finishes are available upon request
8
E280 /
E290
E280FA
E480FA
99
A. Fixture3
A1. Fitters34
C. Light Sources
D. Optics
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles PIER MOUNTS (PB)
450PB
BALLASTS 2
• PEC Photocell -Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120, 277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
NOTES: 1 35HPS is 120 volt only. 2Medium base sockets are standard. 3 Add NF to fixture model if finial not required (i.e. E280NFFA). 4 E280CA only. 5 Recommended for E280FA and E290FA. Type 5 distribution only. 6 Recommended for E280FA and E290FA. Bare lamp only. See website for complete specifications and IES files.
27" 27" 23" 23"
p
p
p
p
p
p
p
p
12" W 12" W 12" W 12" W
E280FASolid Top
Frosted Acrylic
E280CASolid Top
Clear Acrylic
E290FAGlow Top
Frosted Acrylic
E290CAGlow Top
Clear Acrylic
30"
p
p
191/2"131/2"
p
p
p
p
WALL BRACKETS (WB)ARMS - POST MOUNT (PM)
22"16"
49"
p
p
p
p
p
p
p
p23"
17"
p
p
p
p
23"17"
p
p
p
p
49"
p
p
50"
p
p
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentQL Induction
HSSHouse Side Shield
V55
Vertical Diffuser E280FA & E290FA
LO34
LO54
Louver OpticsE280CA
RE3GSM4
RE5GSM4
RefractorE280CA
VCS VLS VFSEU1
LAMPS 2
120o
31"
12" W
• 35HPS1
• 50HPS• 70HPS• 100HPS
• 150HPS• 50MHP• 70MHP• 100MHP
• 150MHP• 26PLT• 42PLT• 57PLT
• 70PLT• 60PLH• 85PLH• 120PLH
• INCAND• QL556
• HPS35/MED• HPS50/MED• HPS70/MED• HPS100/MED
• HPS150/MED• MHP50/MED• MHP70/MED• MHP100/MED
• PLT26• PLT42• PLT57• PLT70
• PLH60• PLH85• PLH120
ORDERING INFORMATION
PIER FIXTURES EXAMPLEWALL FIXTURES EXAMPLE
A A1 B
E280FA | 3 |450PBE280FA | 3 | VLSWB | 100MHP120 | V5 | MHP100/MED | BKT
A A1 B C CD G
Fixture / Fitter / Wall Bracket Light Source Ballast Optics Options FinishWatts / Type / Volts
Uses same information as wall fixture
Fixture / Fitter / Pier Base
E280 / E290
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
E350 /
E360 /
E370
10
17" W
A. Fixture
C. Light Sources
D. Optics
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles PIER MOUNTS (PB)
ORDERING INFORMATION
450PB
301/4"
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentQL InductionLED Light Emitting Diode
BALLASTS 1, 2
LAMPS 2
• PEC Photocell -Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120, 277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
POST & ARM FIXTURES EXAMPLE
B A, B A (See Spec Sheets) C D E G
Arm Mounted Fixture Center Post Post Post Cap Light Source Optics Options FinishTop Fixture (PT) Ballast
No. of Arms Fixture/Postarm Fixt. /Fitter Watts /Type/Volts
NOTES: 1Medium base sockets standard with ballasts up to 150 watts HID. 2Metal Halide systems are pulse start. 3 35HPS is 120 volt only. 4 E360CA only. 5 For T6 ballast and lamp only. 6 If fuse required FHD should be selected. 7 Not available with E350FG or E350SG. 8 Recommended for E360FA. 9 Not recommended for E360CA or E370. Bare lamp only. See website for complete specifications and IES files.
26 1/2" 26 1/2" 26 1/2" 26 1/2" 26 1/2"
p
p
p
p
p
p
p
p
p
p
17" W 17" W 17" W 17" W 17" W
p
p
E370Indirect
E350FGFlat Glass Lensor E350LED
E350SGSag Glass Lens
E360CAFull DiffuserClear Acrylic
E360FAFull Diffuser
Frosted Acrylic
11
• HPS35/MED• HPS50/MED• HPS70/MED• HPS100/MED
• HPS150/MED• MHP50/MED• MHP70/MED• MHP100/MED
• MHP150/MED• MHP39/T6• MHP70/T6• MHP150/T6
• PLT26• PLT42• PLT57• PLT70
• 35HPS3
• 50HPS• 70HPS• 100HPS
• 150HPS• 39MHPT• 70MHPT• 100MHP
• 150MHP• 150MHPT• 26PLT• 42PLT
• 57PLT• 70PLT• 60PLH• 85PLH
• 120PLH• INCAND• QL559
• LED6, 7
• PLH60• PLH85• PLH120
2 | E350FG/EU1PM | | 3312P5 | BC | 100MHP120 | RO3SH-S | PEC | BKT
22"131/2"
501/2"
p
pp
p
p
p
241/2"16"
p
p
p
p
371/2"
p
p
p
OMS SINGLE* EU1PM
291/2"21"
p
p
p
p
321/2"24"
p
p
p
p
HMSSINGLE*
OL SINGLE*
p
681/2"
p
p
45"
p
p
44"
p
p
More arms available, see spec sheet. *Available as twin.
HSSHouse Side Shield E360
V58
Vertical DiffuserType 5 only
E360
LO34
LO54
Louver Optics E360CA
RE3GSM4
RE5GSM4
Refractor E360CA
IO3 / IO55
Indirect Optics Type 3 or 5
E370
ROSH-SIP66 Sealed Roof Optics Horizontal Type 2, 3 or 5
ROH-SRoof OpticsHorizontal
Type 2, 3 or 5E350 and E360
120o
E350 / E360 / E370
ARMS - POST MOUNT (PM)ARMS - POST TOP (PT)
681/2"
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
E420
12
A. Fixture
C. Light Sources
D. Optics OptionH. Hangstraight (HS)
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles
BALLASTS 1, 2
• PEC Photocell - Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120, 277 Volt • FHD Dual Fuse and Holder – 208, 240, 48 Volt
NOTES: 1Medium base sockets standard with ballasts up to 150 watts HID. Mogul base sockets standard for 200 watts and higher. Ballast must be remote mounted with mogul baselamps. 2Metal Halide systems are pulse start. 3 Consult factory for limitations. 4 Consult factory for specification details. See website for complete specifications and IES files.
10"p
p
12"p
p
10"p
p
22" W 22" W 27" W
E420FGFlat Glass Lens
E420SGSag Glass Lens
E420FGSMFlat Glass Lens Side Mount
ROH-SIP66 Sealed Roof OpticsHorizontal Type 2, 3 or 5
13
• 50HPS• 70HPS• 100HPS
• 150HPS• 250HPS• 50MHP
• 70MHP• 100MHP• 150MHP
• 175MHP3
• 200MHP• 250MHP
• 26PLT • 32PLT• 42PLT
• 57PLT• 70PLT• 60PLH
• 85PLH• 120PLH• INCAND
• QL554
• QL854
• QL1654
• LED4
LAMPS 2 • HPS50/MED• HPS70/MED• HPS100/MED• HPS150/MED • HPS250/MOG/ED18
• MHP50/MED• MHP70/MED• MHP100/MED• MHP150/MED• MHP175/MOG/ED283
• MHP200/MOG/ED28• MHP250/MOG/ED28• PLT26• PLT32• PLT42
• PLT/26/Gx24q• PLT/32/Gx24q• PLT/42/Gx24q• PLT/57/Gx24q• PLT/70/Gx24q
• PLH/60/2GB• PLH/85/2GB• PLH/120/2GB
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentQL InductionLED Light Emitting Diode
ROSH-LIP66 Sealed Roof OpticsHorizontal Type 2, 3 or 5
ORDERING INFORMATION
POST & ARM FIXTURES EXAMPLE
B A, B A (See Spec Sheets) C D F, H G
Arm Mounted Fixture Center Post Post Post Cap Light Source Optics Options FinishTop Fixture (PT) Ballast
No. of Arms Fixture/Postarm Fixt. /Fitter Watts /Type/Volts
1 | E420SG/CA6 | | 3320P5 | BC | 100MHP120 | RO3SH-L | FHS/HS | BKT
CA4' - 6' - 8'
CAF4' - 6' - 8'
CSA4' - 6' - 8'
DA4' - 6' - 8'
DAG4' - 6' - 8'
FFA4' - 6' - 8' OB
A
CAS4' - 6' - 8'
A - Height of arm varies depending on the length. Some arms are shown with optional hangstraight fitting. More arms available, see spec sheet.
p
p A
p
p A
p
p
A
p
p
A
p
p
A
p
p
A
p
pA
p
p
361/4"p
p
E420
12"p
p
27" W
E420SGSMSag Glass Lens Side Mount
ARMS
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
E450 /
E460 /
E470
14
Shown withoptional GFF finial
22" W
A. Fixture9
A1. Fitters34
C. Light Sources
D. Optics
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles PIER MOUNTS (PB)ARMS - POST TOP (PT)ARMS - POST MOUNT (PM)
550PB
363/4"
• PEC Photocell -Electronic 120-277 Volt
NOTES: 1Medium base sockets standard with ballasts up to 150 watts HID. Mogul base sockets are standard with ballasts 200 watts HID and over. 2Metal Halide systems are pulse start.3 35HPS is 120 volt only. 4 E460CA only. 5 For T6 or medium base ballast & lamp. 6 Recommended for E460FA only. 7 Consult factory for limitations. 8 If fuse required FHDshould be selected. 9 Add GFF finial to fixture model number if finial is required (i.e. E450GFF/FG). 10 Not recommended for E460CA or E470. Bare lamp only. 11 Sag glass lens required. See website for complete specifications and IES files.
323/4" 323/4" 323/4" 323/4" 323/4"
p
p
22" W 22" W 22" W 22" W 22" W
E470Indirect
E450FGFlat Glass Lensor E450LED
E450SGSag Glass Lens
E460CAFull DiffuserClear Acrylic
E460FAFull Diffuser
Frosted Acrylic
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentQL InductionLED Light Emitting Diode
HSSHouse Side Shield E460
V5 6
Vertical DiffuserType 5 only
E460
LO34
LO54
Louver Optics E460CA
RE3G4
RE5G4
RefractorE460CA
IO3 / IO55
Indirect Optics Type 3 or 5
E470
ROSH-LIP66 Sealed Roof Optics Horizontal
Type 2, 3 or 5
ROH-SIP66 Sealed RoofOptics HorizontalType 2, 3 or 5E450 and E460
15
120o
BALLASTS 1, 2
LAMPS 2 • HPS100/MED• HPS150/MED• HPS250/MOG/ED18• MHP50/MED• MHP70/MED
• MHP100/MED• MHP150/MED• MHP175/MOG/ED287
• MHP200/MOG/ED28• MHP200/MOG/T15
• MHP250/MOG/ED28• MHP39/T6• MHP70/T6• MHP150/T6• PLT/26/Gx24q
• PLT/32/Gx24q• PLT/42/Gx24q• PLT/57/Gx24q• PLT/70/Gx24q• PLH/ 60/2GB
• 35HPS3
• 50HPS• 70HPS• 100HPS
• 150HPS• 250HPS• 50MHP• 70MHP
• 100MHP• 150MHP• 175MHP7
• 200MHP
• 250MHP• 39MHPT• 70MHPT• 150MHPT
• 26PLT• 32PLT• 42PLT• 57PLT
• 70PLT• 60PLH• 85PLH• 120PLH
• INCAND• QL5510
• QL8510, 11
• QL16510, 11
• LED8
• PLH/ 85/2GB• PLH/ 120/2GB
• FHS Single Fuse and Holder – 120, 277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
ORDERING INFORMATION
POST & ARM FIXTURES EXAMPLE
B A, A1, B A (See Spec Sheets) C D E G
Arm Mounted Fixture Center Post Post Post Cap Light Source Optics Options FinishTop Fixture (PT) Ballast
No. of Arms Fixture/Fitter/Postarm Fixt. /Fitter Watts /Type/Volts
2 | E450FG/3/HMPT | | 3318P5 | BC | 100MHP120 | RO3SH-L | PEC | BKT
OM SINGLE* HM SINGLE*HR SINGLE* OL SINGLE*
31"20"
p
p
p
p
357/8"247/8"
p
p
p
p
31"20"
p
p
p
p
35 "24"
p
p
p
p
581/2" 601/8"
421/2"30"
601/8"44"
*Available as twin.
E450 / E460 / E470
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
• HPS35/MED• HPS50/MED• HPS70/MED
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
E480 /
E490
16
A. Fixture6
A1. Fitters34
C. Light Sources
D. Optics
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles
550PB
BALLASTS 1, 2
• PEC Photocell -Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120, 277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
NOTES: 1Medium base sockets standard with ballasts up to 150 watts HID. 2Metal Halide systems are pulse start. 3 35HPS is 120 volt only. 4 Consult factory for limitations.5 Recommended for E480FA and E490FA. Bare lamp only. 6 Add NF to fixture model number if finial not required (i.e. E480NFFA). 7 E480CA and E490CA only. 8 Recommended for E480FA and E490FA. Type 5 distribution only. See website for complete specifications and IES files.
341/2" 341/2" 301/ 2" 301/2"
p
p
p
p
p
p
p
p
181/2" W 181/2" W 181/2" W 181/2" W
E480FASolid Top
Frosted Acrylic
E480CASolid Top
Clear Acrylic
E490FAGlow Top
Frosted Acrylic
E490CAGlow Top
Clear Acrylic
p
p
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact FluorescentQL Induction
INCAND Incandescent
HSSHouse Side Shield E460
V58
Vertical Diffuser E480FA & E490FA
LO37
LO57
Louver Optics E480CA
RE3G7
RE5G7
RefractorE480CA
LAMPS 2
17
120o
381/2"
181/2" W
• 35HPS3
• 50HPS• 70HPS
• 100HPS• 150HPS• 50MHP
• 70MHP• 100MHP• 150MHP
• 175MHP4
• 26PLT• 42PLT
• 57PLT• 70PLT• 60PLH
• 85PLH• 120PLH• QL555
• QL855
• QL1655
• INCAND
• HPS35/MED• HPS50/MED• HPS70/MED• HPS100/MED
• HPS150/MED• MHP50/MED• MHP70/MED• MHP100/MED
• MHP150/MED• MHP175/MOG/ED284
• PLT26• PLT42
• PLT57• PLT70• PLH60• PLH85
• PLH120
ORDERING INFORMATION
POST & ARM FIXTURES EXAMPLE
B A, B A1 (See Spec Sheets) C D E G
Arm Mounted Fixture Center Post Post Post Cap Light Source Optics Options FinishTop Fixture (PT) Ballast
No. of Arms Fixture/Fitter/Postarm Fixt. /Fitter Watts /Type/Volts
2 | E480FA /HMPT | | 3318P5 | BC | 100MHP120 | V5 | PEC | BKT
OL SINGLE*HR SINGLE* HM SINGLE*OM SINGLE*
291/4"20 "
p
p
p
p341/4"25"
p
p
p
p
33"233/4"
p
p
p
p
291/4"20"
p
p
p
p
PIER MOUNTS (PB)ARMS - POST TOP (PT)ARMS - POST MOUNT (PM)
421/2"
p
p
601/4"
p
p
68"
p
p
453/4"
p
p
613/4"
p
p
More arms available, see spec sheet. *Available as twin.
E480 / E490
30"
p
p
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
18
E520
18
19
A. Fixture
D. Optics
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles
BALLASTS 1, 2
• PEC Photocell -Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120-277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
NOTES: 1Medium base sockets standard with ballasts up to 150 watts HID. Mogul base sockets standard for 200 watts and higher. 2Metal Halide systems are pulse start.3 Consult factory for limitations. 4 Consult factory for specification details. See website for complete specifications and IES files.
121/2"p
p
p
p
p
p
27" W 27" W
E520FGFlat Glass Lens
E520SGSag Glass Lens
E520FGSMFlat Glass LensSide Mount
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentQL InductionLED Light Emitting Diode
ROH-LRoof Optics Horizontal2, 3, 4 or 5
ROSH-LIP66 Sealed Roof Optics 2, 3 or 5
LAMPS 2
151/2"
32" W
121/2"p
p
E520SGSMSag Glass LensSide Mount
32" W
151/2"
OptionH. Hangstraight (HS)
• 50HPS• 70HPS• 100HPS• 150HPS
• 57PLT• 70PLT• 60PLH• 85PLH
• 120PLH• INCAND• QL554
• QL854
• HPS50/MED• HPS70/MED• HPS100/MED• HPS150/MED• HPS250/MOG/ED18• HPS400/MOG/ED18
• MHP50/MED• MHP70/MED• MHP100/MED• MHP150/MED• MHP175/MOG/ED283
• MHP200/MOG/T15
• MHP250/MOG/ED28• MHP320/MOG/ED28• MHP350/MOG/ED28• MHP400/MOG/ED28• PLT26• PLT32• PLT42
• PLT/42/Gx24q• PLT/57/Gx24q• PLT/70/Gx24q• PLH/ 60/2GB• PLH/ 85/2GB• PLH/ 120/2GB
C. Light Sources
ORDERING INFORMATION
POST & ARM FIXTURES EXAMPLE
B A, B A (See Spec Sheets) C D F, H G
Arm Mounted Fixture Center Post Post Post Cap Light Source Optics Options FinishNo. Top Fixture (PT) Ballast
of Arms Fixture/Postarm Fixt. /Fitter Watts /Type/Volts
1 | E520SG/CA6 | | 3320P5 | BC | 400MHP120 | RO3SH-L | FHS/HS | BKT
CA4'- 6' - 8'
CAF4' - 6' - 8'
CAS4'- 6' - 8'
A
p
p
A
p
p
A
p
p
A - Height of arm varies depending on the length. Some arms are shown with optional hangstraight fitting. More arms available, see spec sheet.
ARMS - POST MOUNTED (PM)
E520
• 250HPS• 400HPS• 50MHP• 70MHP
• 100MHP• 175MHP 3
• 200MHP• 250MHP
• 400MHP• 320MHP• 350MHP• 42PLT
• QL1654
• LED4
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
E550
20
21
A. Fixture
D. Optics
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Mounting Styles
• PEC Photocell -Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120-277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
27"W 27"W
E550FGFlat Glass Lens
E550SGSag Glass Lens
ARMS - POST TOP ( PT) POST MOUNT (PM) WALL BRACKETS (WB)
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentQL InductionLED Light Emitting Diode
ROH-LRoof Optics Horizontal2, 3, 4 or 5
ROSH-LIP66 Sealed Roof Optics 3 or 5
65"
p
OptionH. Hangstraight (HS)
C. Light Sources
38"
p
p
27"W
E550LED
HR SINGLE*
25"p
38"
p
VC
p
20"p
p
34"p
ORDERING INFORMATION
POST & ARM FIXTURES EXAMPLE
B A, B A (See Spec Sheets) C D E G
Arm Mounted Fixture Center Post Post Post Cap Light Source Optics Options FinishTop Fixture (PT) Ballast
No. of Arms Fixture/Postarm Fixture Watts /Type/Volts
2 | E550FG/HRPM | | 3320P5 | BCC | 250MHP120 | RO3SH-L | PEC | BKT
60"
p
p
491/2"
pOM SINGLE*
p
221/2"p
p
36"p
p
p
VL
p 20"
p
p
34"p
60"
p
p
p 20"
p
p
34"p
p
p
VF
p
p
More arms available, see spec sheet. * Available as Twin.
60"
E550
38"
p
p
38"
p
p
BALLASTS 1, 2
LAMPS 2 • HPS150/MED• HPS250/MOG/ED18• MHP50/MED• MHP70/MED• MHP100/MED
• MHP150/MED• MHP175/MOG/ED284
• MHP200/MOG/ED28• MHP200/MOG/T15• MHP250/MOG/ED28
• PLT/42/Gx24q• PLT/57/Gx24q• PLT/70/Gx24q• PLH/ 60/2GB• PLH/ 85/2GB
• MHP320/MOG/ED28• MHP350/MOG/ED28• MHP400/MOG/ED28• PLT/26/Gx24q• PLT/32/Gx24q
• PLH/ 120/2GB
• 35HPS3
• 50HPS• 70HPS• 100HPS
• 150HPS• 250HPS• 50MHP• 70MHP
• 100MHP• 150MHP• 175MHP4
• 200MHP
• 250MHP• 320MHP• 350MHP• 400MHP
• 26PLT• 32PLT• 42PLT• 57PLT
• 70PLT• 60PLH• 85PLH• 120PLH
• INCAND• QL554
• QL854
• QL1654
• LED5
• HPS35/MED• HPS50/MED• HPS70/MED• HPS100/MED
NOTES: 1Medium base sockets standard with ballasts up to 150 watts HID. Mogul base sockets are standard with ballasts 200 watts HID and over. 2Metal Halide systems are pulsestart. 3 35HPS is 120 volt only. 4 Consult factory for limitations. 5 If fuse required FHD should be selected. See website for complete specifications and IES files.
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
E250 /
E260 /
E270
22
23
A. Bollards
G. Finish
E. Optional Photocell
F. Optional Fusing
B. Chain Loops Optional**
ORDERING INFORMATION
• PEC Photocell -Electronic 120-277 Volt
• FHS Single Fuse and Holder – 120-277 Volt • FHD Dual Fuse and Holder – 208, 240, 480 Volt
BOLLARDS EXAMPLE
E260FA-340B | V5 | FHS | 70HPS120 | VG
A D C GF
Bollard Model Optics Options Light Source FinishBallast
Watts /Type/Volts
• E250-E340B• E250CA-E340B• E250FA-E340B• E260CA-E340B• E260FA-E340B• E270-E340B• E270CA-E340B• E270FA-E340B
• E250-E346B• E250CA-E346B• E250FA-E346B• E260CA-E346B• E260FA-E346B• E270-E346B• E270CA-E346B• E270FA-E346B
E250-340B, E260-340BE270-340B
p
p
50"
Bolt Circle Center Line
61/2" DIA
8" W 8" W
Models*
CL1 ONECHAINLOOP
CL2 TWOCHAINLOOPS
BOLLARDCHAIN
Specify LengthSpecify Orientation
E260-887B | IO3 | FHS | 70HPS120 | VG
Bollard Model Optics Options Light Source FinishBallast
Watts/Type/Volts
E250-887B, E260-887BE270-887B
Bolt Circle Center Line
31/4" DIA
6" W 6" W
A D C GF
C. Light Sources
D. Optics
IO32
Indirect Optics Type 3 (E270)
IO52
Indirect OpticsType 5 (E270)
V57
Vertical DiffuserType 5 (E260)
RL3LED Roof Optics Type 3 (E250)
RL5LED Roof Optics Type 5 (E250)
HPS High Pressure SodiumMHP Metal Halide Pulse StartPLT Compact FluorescentPLH Compact Fluorescent
INCAND IncandescentLED Light Emitting Diode
NOTES: 1 For medium base or PL lamps in 260 series only. 2 For T6 ballast and lamp only. 3 Electronic HID ballast drivers. 4 Metal Halide systems are pulse start. 5 If fuse required FHD should be selected. 635HPS is 120 volt only. 7 Recommended for E260FA and E260CA HID or Incandescent.See website for complete specifications and IES files.
BALLASTS 4
LAMPS 4 • HPS35/MED1
• HPS50/MED1
• HPS70/MED1
• HPS100/MED1
• MHP39/T6 1
• MHP50/MED1
• MHP70/MED1
• MHP70/T6 1
• MHP100/MED1
• PLT261
• PLT321
• PLT421
• PLT571
• PLT701
• PLH601
• PLH85 1
• 35HPS 1, 6
• 50HPS 1
• 70HPS1
• 100HPS1
• 39MHPT 1, 3
• 50MHP 1, 3
• 70MHP 1, 3
• 70MHPT 1, 3
• 100MHP 1, 3
• 26PLT 1
• 32PLT 1
• 42PLT 1
• 57PLT 1
• 70PLT 1
• 60PLH 1
• 85PLH 1
• INCAND• LED 5
*For custom heights, designate height afterbollard model. Example: E260-340B-64”
** TO ORDER CHAIN: Specify total length of chain required for project.
E250 / E260 / E270 BOLLARDS
p
p
50"
E250-346B, E260-346BE270-346B
Bolt Circle Center Line
81/4" DIA
117/8" W 117/8" W
p
p
50"
• E250-E887B• E250CA-E887B• E250FA-E887B• E260CA-E887B
• E260FA-E887B• E270-E887B• E270CA-E887B• E270FA-E887B
STANDARD* CUSTOM
VG Verde GreenSI Swedish Iron
OWGT Old World GrayTextured
BKT Black TexturedWHT White TexturedPGT Park Green TexturedABZT Architectural Medium
Bronze TexturedDBT Dark Bronze Textured
OI Old IronRT Rust
WBR Weathered BrownCD Cedar
WBK Weathered BlackTT Two Tone
STERNBERG SELECT
*Smooth finishes are available upon request
SIZ
E C
OM
PA
RIS
ON
24
SIZE COMPARISON
E270Indirect
19"
E260CAFull DiffuserClear Acrylic
E260FAFull Diffuser
Frosted Acrylic
E250Roof LEDOptics
E370Indirect
E350FGFlat Glass Lensor E350LED
E350SGSag Glass Lens
E360CAFull DiffuserClear Acrylic
E360FAFull Diffuser
Frosted Acrylic
E420FGFlat Glass Lens
E420SGSag Glass Lens
E420FGSMFlat Glass Lens Side Mount
E470Indirect
32 3/4"
E450FGFlat Glass Lensor E450LED
E450SGSag Glass Lens
E460CAFull DiffuserClear Acrylic
E460FAFull Diffuser
Frosted Acrylic
300SERIES
400SERIES
200SERIES13" W 13" W 13" W
17" W
22" W
22" W 22" W 22" W 22" W 22" W
22" W 27" W
17" W 17" W 17" W 17" W
p
p
19"
p
p
19"
p
p
19"
p
p
13" W
261/2"
p
p
261/2"
p
p
261/2"
p
p
261/2"
p
p
261/2"
p
p
10"
p
p
10"
p
p
E420SGSMSag Glass Lens Side Mount
27" W
12"
p
p
p
p
32 3/4"
p
p
32 3/4"
p
p
32 3/4"
p
p
32 3/4"
p
p
12"
p
p
27"
p
p
12" W
23"
p
p
12" W
E280FASolid Top
Frosted Acrylic
E290FAGlow Top
Frosted Acrylic
181/2" W 181/2" W
25
E520FGFlat Glass Lens
E520SGSag Glass Lens
E520FGSMFlat Glass Lens Side Mount
E480FASolid Top
Frosted Acrylic
E490CAGlow Top
Clear Acrylic
E490FAGlow Top
Frosted Acrylic
E550FGFlat Glass Lensor E550LED
E550SGSag Glass Lens
500SERIES
E480CASolid Top
Clear Acrylic
27" W
27" W 27" W
27" W 32" W
181/2" W 181/2" W
341/4"
p
p
341/4"
p
p
301/2"
p
p
301/2"
p
p
121/2"
p
p
151/2"
p
p
121/2"
p
p
38"
p
p
38"
p
p
E520SGSMSag Glass Lens Side Mount
32" W
151/2"
p
p
PA
INT
CO
LO
RS
26
PAINT COLORS
STANDARD FINISHES
CUSTOM FINISHES
STERNBERG SELECT FINISHES
Stage I: All products to be coated shall receive a 96 secondAlkaline cleaner application followed by a 48 second freshwater rinse at ambient temperature.
Stage II: Shall be a 60 second Phosphoric Acid 4% solution treat-ment with a Fluoride accelerant followed by a 48 secondreverse osmosis water rinse at ambient temperature. Therinse will be followed by a high pressure air spray toremove all moisture from the product.
Stage III: Shall be a 48 second Non-Chrome Polymer sealer application.
Stage IV: Shall start with 16 minutes in a drying oven at 400degrees.
Stage V: Shall be an electro-static application of polyester powderin a downdraft spray booth and applied by articulatedrobotic arm sprayer and over sprayed by an applicationtechnician. Polyester powder over spray shall be recover-able and reusable.
Stage VI: Shall be 25 minutes oven curing at 450 degrees to harden the powder finish and create final appearance andadhesion to the substrate. Curing shall be followed by 9.5 minutes in a cooling tunnel to prepare for un-racking.
Written Coatings Specification
BKT - BLACK TEXTURED WHT -WHITE TEXTURED PGT - PARK GREEN ABZT - ARCHITECTURAL DBT - DARK BRONZETEXTURED MEDIUM BRONZE TEXTURED
TEXTURED
VG-VERDE GREEN SI - SWEDISH IRON OWGT - OLD WORLD GRAY TEXTURED
OI - OLD IRON RT - RUST WBR - WEATHERED CD - CEDAR WBK -WEATHERED TT - TWO TONEBROWN BLACK
Smooth finishes areavailable uponrequest
All colors shown are approximate and may have a slight variation.
Pre -Treatment and curing processes shall be followed by quality checks for adhesion using a cross-hatch test and for proper curing by means ofa solvent rub test. Coatings process shall meet or exceed AAMA-2604-05 standard.
27
Sternberg now has a Five-Year Limited Warranty. See our product and finish warranty guide for details.
555 Lawrence Ave., Roselle, IL 60172 | P 800-621-3376 | F 847-588-3440 | E [email protected] | www.sternberglighting.com
SLEUROBRCHR3-11/5M AL PRINTED IN USA
CONTACT US FOR OUR FULL LINE PRODUCT CATALOG
HID - 5 YEAR LIMITED WARRANTY | LED - 7 YEAR LIMITED WARRANTY
PRESERVATIONOF THE NIGHT SKY
TO BE EMPLOYEEOWNED
ProudSTERNBERGLIGHTING IS A MEMBER OF THEINTERNATIONALDARK SKYASSOCIATION (IDA)