Contatore Engineering Brochure 2015
-
Upload
emmy-mancini -
Category
Documents
-
view
126 -
download
0
Transcript of Contatore Engineering Brochure 2015
CONTATORE ENGINEERING
When it comes to the manufacture, maintenance and repair of earthmoving equipment and
other machinery, Contatore Engineering is Perth’s specialist. At our highly equipped factory
premises located in Welshpool, we have a wide range of machining and fabrication and
hydraulic / fitting resources at our disposal.
Hire / Buy options: There are many economically sound reasons why it may be favourable for
a business to hire equipment rather than to buy it. Whether you need to hire equipment for a
week, month or an extended period of time, Contatore Engineering has the solution.
We distribute a large range of Socomec products including Rock Breakers, Vibrating Rippers,
Crushers, Screening Buckets and many other attachments etc.
Custom design: At Contatore Engineering we specialise in the design of prototype machinery
that is required to perform specific tasks. From concept design drawings to the finished product,
our drawing office will work together with our customers to make sure we meet their
requirements and get the best results.
See below for our company profile and some of the range of products and services that are
available from Contatore Engineering.
97 Radium Street Welshpool, WA 6106 Phone: (08) 9356 2725 Fax: (08) 9351 8275 Email: [email protected] Web: www.contatoreengineering.com.au
SOCOMEC
ROCK-BREAKERS
DMS RANGE (0.7 TO 14 TONNE EXCAVATORS)
CERTIFIED CRANE JIBS 3T WORKING LOAD LIMIT
(1, 2 OR 3 SECTIONS)
SOCOMEC
ROCK-BREAKERS
DMS RANGE (0.7 TO 14 TONNE EXCAVATORS)
SOCOMEC
ROCK-BREAKERS
MDO RANGE (15 TO 65 TONNE EXCAVATORS)
EXCAVATOR BUCKETS GENERAL PURPOSE, HEAVY DUTY,
ROCK, TRENCHING, BATTER, TILTING,
SKELETON, TRAPEZOIDAL,
COMBINATION RIPPER BUCKETS ETC…
HYDRAULIC CYLINDERS REPAIR, MANUFACTURE
AND SERVICE
SOCOMEC
VIBRATING PLATE
SUITS MACHINES
2 – 24 TONS
FORESTRY EQUIPMENT
LOG FORKS
SINGLE RIPPER
TYNE PICKS FOR
EXCAVATORS
TYRE HANDLERS
3T, 4.5, 5T, 6T AND 8T
WORKING LOAD LIMITS
GRAIN BUCKETS PALLET FORKS
MANUAL AND HYDRAULIC
TRUCK MOUNTED
WATER TANKS
SOCOMEC HANDLING GRAPPLE
TO SUIT MACHINES
1.5 TONNES TO 21 TONNES
MACHINING AS SPECIFIED ON THE
CAPABILITY SHEET
FABRICATION
4 IN 1 BUCKETS
SOCOMEC
STEEL SHEARS
TO SUIT MACHINES
2.5 TONNES TO 13 TONNES
CERTIFIED LIFTING DEVICES
TILTING BUCKET USING A ROTARY ACTUATOR
PIPE CLAMPING FORKS HYDRAULICALLY OPERATED
LOADER & EXCAVATOR
SKELETON BUCKETS
MACHINING &
HYDRAULIC REPAIRS
CYLINDERS, CUSTOM MACHINING
OF COMPONENTS ETC…
LIFT AND CARRY RAKE
WITH CLAMPING ARMS