Containment Isolators

MALAYSIA17A & 17BJalan PJS 1/3246150 Petaling JayaT +66 111 271 3669

Containment Barrier Systems

With the accelerated production of highly potent pharmaceutical drugs, the need for containment technology and interest in Isolators is on the increase.

Telstar has the expertise to meet the rising challenges by offering an impressive range of containment Isolators, from single chambers to multi chamber systems accommodating where necessary a wide range of process equipment.

The production site where the products are made has been assessed and given ISO 9001:2008 approval

All equipment is manufactured to allow it to be CE marked in accordance with 98/37/EC Machinery Directive.

Fully Compliant

Telstar Containment Systems are guaranteed to comply with relevant standards and demands set by the regulatory bodies to ensure conformance and clients satisfaction, including:

• ISO 14644-1 Cleanroom & Associated Controlled Environment

• FS 209E Airborne Particulate Cleanliness• cGMP Guidelines (current Good Manufacturing

Practices)• FDA (Food and Drug Administration)• MCA (Medical Control Agency)• ISPE guidelines (The Society of Pharmaceutical and

Medical Device Professionals)• American Glovebox Society Guidelines• FDA 21CFR Part 11

Telstar provides a comprehensive validation service to clients providing FAT/SAT/DQ/IQ/OQ & PQ protocols if required.

Telstar Barrier Containment Isolation

Designed to provide operator protection from airborne particles and Potent APIs for a wide range of process applications, with and without integrated process equipment including:

• Dispensing / Weighing / Sampling

• Sieving / Blending

• Charging / API Addition

• Mixing / Granulation

• Centrifuge

• Freeze Dryer Off-Load / Pack-Off

• Filter Dryer Off-Load / Pack-Off

• Milling / Micronising

• Tabletting

• Final Packing / Blister Pack

Isolators for API’s and cytotoxic compounds have been

independently verified to achieve operator protection

levels down to 0.2ng/m3 (0.0002 µg/m3)

Telstar Isolators are designed to provide a locally controlled environment operating at negative pressure, with the ability to control and monitor all operating parameters. Providing protection to the operator and the external environment from the highly potent products.

Designed, manufactured, supplied and installed - high quality stand alone or integrated systems with or without process equipment, offering cost efficient customised and standard solutions.

Multi Chamber Weighing, Dispensing& Sampling Isolator

Product loading is a critical process in all barrier containment systems. At Telstar we are familiar with the many specific requirements and challenges presented during Pharmaceutical API production.

Drum loading via an inflatable seal with an internal door is just one of a variety of solutions available, providing an airtight seal to ensure the integrity of the Isolators internal negative pressure conditions.

PLC based control systems utilising a Siemens PLC platform is offered as standard complete with I/O according the specific equipment providing a fully automated system, supported by Ethernet communication enabling critical parameters to be communicated to an external DCS system.

A fully compatible Touch Panel HMI provides operator interface, for control, indications, display of Isolator conditions and alarm handling. Located in a suitable position on the Isolator service plenum it is easy to reach and observe by operators.

The Telstar Glove Tester device enables both in situ and off line testing of gloves, if fitted to a Telstar glove ring. This simple device works solely on air to test the glove integrity.

The system consists of a glove port test plug with inflatable seal, which is inserted into the glove port. The seal is inflated making an air tight seal to the glove port. The glove is inflated to a test pressure and the pressure decay of the glove is monitored over a period of time. At the end of this test period the pressure decay is recorded and the leakage rate of the glove determined.

The Telstar Glove Tester is available as an integrated device (Isolator dedicated) and alternatively a mobile device to serve multiple Isolators.

Telstar contained transfer system (CTS), independently tested to below 0.2 nanograms offers ultimate safety, simplicity of operation and is easy to decontaminate.

The active port is designed to be used with a passive canister and or bag in / bag out grommet connection. The purpose of the port is to allow contained transfer of materials to and from the Isolator or waste out of the Isolator in a controlled manner, without breaking containment, ensuring operator protection from the internal environment at all times.

Spray guns and rotating spray balls for WIP are offered as an option for manual cleaning / decontamination of the Isolator.

Available in PFA or stainless steel the wash guns are suitable for use in all Telstar Isolators handling pharmaceutical compounds.

Triclover service entries complete with manually operated ball valves will be supplied in the wall of the Isolator for connection of the clients WIP media and in the base of the Isolator for connection of the clients WIP drain outlet.

Dispensing & Transfer Isolators with WIP/DIP Skid

ISO 9001: Certified CompanyBR-CONTAINMENT-ISOLATORS-EN-0319Telstar reserves the right to improvements and specifications changes without notice.

SPAINHeadquarters Av. Font i Sagué, 5508227 Terrassa (Spain)T +34 937 361 600

F +34 937 861 380

Santibáñez de Béjar, 308042 MadridT +34 913 717 790F +34 913 717 791

PORTUGALEstrada Consiglieri Pedroso, 71Edificio D-6º Esq2730-055 Barcarena, LisboaT +351 214 350 854F +351 214 350 089

BRAZILAv. Ermano Marchetti, 1435Zandar 05038-001Sao PauloT+ 55 113 4612 1997

NORTH AMERICA1504 Grundy's LaneBristol PA 19007T +1 (215) 826 0770

F +1 (215) 826 0222

UNITED KINGDOMUnit 4, Shaw Cross BusinessPark, Horace Waller VC Parade,Dewsbury, West YorkshireWF12 7RFT +44 (0)1924 455 339F +44 (0)1924 452 295CHINA

No. 30 Jin Wen Road,Zu Qiao Airport Industrial Park,Pudong District201323 ShangaiT +86 21 58 093 731F +86 21 58 092 857

JAPANAzbil CorporationTokyo Building,2-7-3 Marunouchi, Chiyoda-ku,Tokyo 100-6419,T +81 3 6810 1000

F +81 3 5220 7270INDIAOffice No. 312 & 313, 3r floorManjeera Majestic Commercial, KPHB,JNTU, Hi-Tech City Road,Hyderabad - 500085T. +914 042 410 172

FRANCEZAC de la Clef de saint Pierre5, rue du groupe Manouchian78990 ÉlancourtT +33 (0)1 3013 1870 F +33 (0)1 3062 5477

BANGLADESHSuit No. B-4 (4th Floor)Anam Rangs PlazaPlot No.61, Road No.6/ADhanmondi, Daka 1209F +88 02 8192078

ITALYVia Girardi 2720025 Legnano, MilanoT +39 033 145 5241F+ 39 033 144 0752

MEXICOMoliere #330-403Col. Polanco ReformaCP 11540Mexico, D.F.T +(52-55) 5282 2678

www.telstar.com

Telstar has over 50 years’ experience in the developmentof highly complex projects for pharmaceutical and biotech industries, from integrated process equipment using in-house technologies, to design, engineering and construction of plants, including turnkey project management and support for critical installations.

Telstar is a company with global vision that is acknowledged as a major supplier to the pharmaceutical industry, and has been designing and manufacturing Aseptic and Containment Barrier Isolators for over 25 years.

Installations range from high quality stand alone Isolators to customised solutions; Telstar’s solutions are innovative withthe capacity to develop and manufacture systems entirely in-house providing a cost effective solution and ensuring high quality control over the whole process.

Telstar has a dynamic team of experienced engineers using state of the art software to produce GMP designs with comprehensive validation packages. As an ISO9001 registered company, Telstar demonstrates a reliable and stringent quality management system including extensive in-house testing and compliance procedures.

Telstar offer engineering coupled with efficient manufacturing and business practices providing high quality solutions and superior value. Telstar is constantly developing solutions to address the emerging challenges in pharmaceutical containment Isolator technology.

Pharmaceutical formulation and compounding of active substances with excipients in aqueous solutions usually necessitates integration with a variety of process equipment. Such equipment may include process tanks/reactors of varying capacities dependent upon the batch size, which may be connected on a permanent fixed basis or may even be mobile and require connection/disconnection on a frequent basis.

In addition platform scales, load cells, integral mixing tanks, process connection valves and WIP systems are common features making up a complete package. Invariably given the geometry of the equipment, Isolators may be placed on raised platforms for operator access.

Depending upon the production process and product being manufactured the formulation or compounding Isolator package may be considered an entirely aseptic process, in which case the Isolator would be designed to suit grade A requirements.

At Telstar we are continually aware of the requirements of the pharmaceutical industry and the ever increasing demands to provide cost effective solutions for both small and large scale containment projects.

With the accelerated production of highly potent pharmaceutical drugs, the need for containment technology and interest in Isolators is ever increasing. Telstar has the experience and expertise to meet the rising challenges by offering an impressive range of containment Isolators, from single chambers to multi chamber systems accommodating where necessary a wide range of process equipment.

Telstar containment Isolators are designed to provide a locally controlled negative pressure environment with the ability to control and monitor all operating parameters, to provide protection to the operator and the surrounding environment from the highly potent products.

Successful design and manufacture of production scale containment systems demand a complete understanding of the actual process. Telstar has accumulated over 30 years’experience specialising in standard and high level customised systems to ISO7 and ISO 8 classification.

Telstar’s technical team possess the expertise to understand the client’s requirements and processes to design and manufacture bespoke equipment.

Half Suit IsolatorsSome applications and activities are perhaps better managed by having greater flexibility of movement, which otherwise might not be entirely possible using traditional gloveport access alone. Being able to carry out operations using movement from the whole upper body rather than just outstretched arms eases many ergonomic issues presented by some tasks and enables the operator to work much easier within a larger area.

Half suits are available in a range of different materials and are manufactured to high standards providing maximum protection to the operator. In addition fresh air supply to the internal cavity ensures operator comfort at all times.

As an integral feature of the rigid wall Isolator, leak tightness of the complete assembly is tested on a regular basis, however the half suits themselves can be tested in isolation as part of an ongoing preventative and maintenance plan.

Sampling & Dispensing IsolatorsTelstar supply standard or tailored Isolators to suit your specific needs, from single-chamber mobile Isolators to multi-chamber units offering easy manipulation of product, processes and tools. Ergonomic evaluation and modelling lie at the heart of our designs, delivering ease of access and maximum protection for operators and product.

Our sampling and dispensing Isolators guarantee OEL levels for active pharmaceutical ingredients and potent compounds to<1µg/m3 over a task duration or TWA.

Typical features include:

•Safe-change inlet and outlet HEPA filtration

•On-board air-handling systems

•PLC control and HMI interfaces

•On board WIP systems

Charging & Off-loading IsolatorsTelstar offer fully integrated systems giving maximum containment of potent compounds during charging, off-loading and sampling from vessels or filter dryers. Additionally Telstar produce containment systems that allow thorough and safe recoveryofproductheelfromthedryer’ssurfacemembraneprotecting the pharmaceutical product.

Small or large scale high containment product off-loading from filter dryers or centrifuges is one of Telstar’smanyareas of expertise, various single and multi-chamber methods of off-loading to ported bags, multi-lined kegs or IBC’shavebeenmanufacturedworldwidesuccessfullyfornearly 30 years.

Offering advanced ergonomic designs Telstar ensure that our clients receive a high quality standard of service which contributes to the smooth and satisfactory project completion.

Fully CompliantTelstar Containment Systems are guaranteed to comply with relevant standards and demands set by the regulatory bodies to ensure conformance and clients satisfaction.

Telstar provides a comprehensive validation service to clients providing FAT/SAT/DQ/IQ/QQ & PQ protocols if required.

As an ISO9001:2015 registered company, Telstar demonstrates a reliable and stringent quality management system including extensive in-house testing and compliance procedures.

Telstar is extremely proud of its achievements in Containment Isolators and as a recognised market leader in this field. Telstar continues to challenge the current boundaries in Isolator technology, to keep pace with the ever increasing demands laid down by the market.

Telstar Containment IsolationDesigned to provide operator protection from airborne particles and Potent APIs for a wide range of process applications, with and without integrated process equipment including:

•Dispensing/Weighing/Sampling

•Sieving/Blending

•Charging/API Addition

•Mixing/Granulation

•Formulation

•Centrifuge

•Freeze/Filter Dryer Off-Load/Pack-Off

•Milling/Micronising

•Tabletting

•Final Packing/Blister Pack

Isolators for API’s and cytotoxic compounds have beenindependently verified to achieve operator protection levels down to low nanogram levels.

Proven Containment Technology

Validated to <200 picograms/m3

Equivalent to (OEB 8)

MALAYSIA17A & 17BJalan PJS 1/3246150 Petaling JayaT +66 111 271 3669

Containment Barrier Systems

With the accelerated production of highly potent pharmaceutical drugs, the need for containment technology and interest in Isolators is on the increase.

Telstar has the expertise to meet the rising challenges by offering an impressive range of containment Isolators, from single chambers to multi chamber systems accommodating where necessary a wide range of process equipment.

The production site where the products are made has been assessed and given ISO 9001:2008 approval

All equipment is manufactured to allow it to be CE marked in accordance with 98/37/EC Machinery Directive.

Fully Compliant

Telstar Containment Systems are guaranteed to comply with relevant standards and demands set by the regulatory bodies to ensure conformance and clients satisfaction, including:

• ISO 14644-1 Cleanroom & Associated Controlled Environment

• FS 209E Airborne Particulate Cleanliness• cGMP Guidelines (current Good Manufacturing

Practices)• FDA (Food and Drug Administration)• MCA (Medical Control Agency)• ISPE guidelines (The Society of Pharmaceutical and

Medical Device Professionals)• American Glovebox Society Guidelines• FDA 21CFR Part 11

Telstar provides a comprehensive validation service to clients providing FAT/SAT/DQ/IQ/OQ & PQ protocols if required.

Telstar Barrier Containment Isolation

Designed to provide operator protection from airborne particles and Potent APIs for a wide range of process applications, with and without integrated process equipment including:

• Dispensing / Weighing / Sampling

• Sieving / Blending

• Charging / API Addition

• Mixing / Granulation

• Centrifuge

• Freeze Dryer Off-Load / Pack-Off

• Filter Dryer Off-Load / Pack-Off

• Milling / Micronising

• Tabletting

• Final Packing / Blister Pack

Isolators for API’s and cytotoxic compounds have been

independently verified to achieve operator protection

levels down to 0.2ng/m3 (0.0002 µg/m3)

Telstar Isolators are designed to provide a locally controlled environment operating at negative pressure, with the ability to control and monitor all operating parameters. Providing protection to the operator and the external environment from the highly potent products.

Designed, manufactured, supplied and installed - high quality stand alone or integrated systems with or without process equipment, offering cost efficient customised and standard solutions.

Multi Chamber Weighing, Dispensing& Sampling Isolator

Product loading is a critical process in all barrier containment systems. At Telstar we are familiar with the many specific requirements and challenges presented during Pharmaceutical API production.

Drum loading via an inflatable seal with an internal door is just one of a variety of solutions available, providing an airtight seal to ensure the integrity of the Isolators internal negative pressure conditions.

PLC based control systems utilising a Siemens PLC platform is offered as standard complete with I/O according the specific equipment providing a fully automated system, supported by Ethernet communication enabling critical parameters to be communicated to an external DCS system.

A fully compatible Touch Panel HMI provides operator interface, for control, indications, display of Isolator conditions and alarm handling. Located in a suitable position on the Isolator service plenum it is easy to reach and observe by operators.

The Telstar Glove Tester device enables both in situ and off line testing of gloves, if fitted to a Telstar glove ring. This simple device works solely on air to test the glove integrity.

The system consists of a glove port test plug with inflatable seal, which is inserted into the glove port. The seal is inflated making an air tight seal to the glove port. The glove is inflated to a test pressure and the pressure decay of the glove is monitored over a period of time. At the end of this test period the pressure decay is recorded and the leakage rate of the glove determined.

The Telstar Glove Tester is available as an integrated device (Isolator dedicated) and alternatively a mobile device to serve multiple Isolators.

Telstar contained transfer system (CTS), independently tested to below 0.2 nanograms offers ultimate safety, simplicity of operation and is easy to decontaminate.

The active port is designed to be used with a passive canister and or bag in / bag out grommet connection. The purpose of the port is to allow contained transfer of materials to and from the Isolator or waste out of the Isolator in a controlled manner, without breaking containment, ensuring operator protection from the internal environment at all times.

Spray guns and rotating spray balls for WIP are offered as an option for manual cleaning / decontamination of the Isolator.

Available in PFA or stainless steel the wash guns are suitable for use in all Telstar Isolators handling pharmaceutical compounds.

Triclover service entries complete with manually operated ball valves will be supplied in the wall of the Isolator for connection of the clients WIP media and in the base of the Isolator for connection of the clients WIP drain outlet.

Dispensing & Transfer Isolators with WIP/DIP Skid

ISO 9001: Certified CompanyBR-CONTAINMENT-ISOLATORS-EN-0319Telstar reserves the right to improvements and specifications changes without notice.

SPAINHeadquarters Av. Font i Sagué, 5508227 Terrassa (Spain)T +34 937 361 600

F +34 937 861 380

Santibáñez de Béjar, 308042 MadridT +34 913 717 790F +34 913 717 791

PORTUGALEstrada Consiglieri Pedroso, 71Edificio D-6º Esq2730-055 Barcarena, LisboaT +351 214 350 854F +351 214 350 089

BRAZILAv. Ermano Marchetti, 1435Zandar 05038-001Sao PauloT+ 55 113 4612 1997

NORTH AMERICA1504 Grundy's LaneBristol PA 19007T +1 (215) 826 0770

F +1 (215) 826 0222

UNITED KINGDOMUnit 4, Shaw Cross BusinessPark, Horace Waller VC Parade,Dewsbury, West YorkshireWF12 7RFT +44 (0)1924 455 339F +44 (0)1924 452 295CHINA

No. 30 Jin Wen Road,Zu Qiao Airport Industrial Park,Pudong District201323 ShangaiT +86 21 58 093 731F +86 21 58 092 857

JAPANAzbil CorporationTokyo Building,2-7-3 Marunouchi, Chiyoda-ku,Tokyo 100-6419,T +81 3 6810 1000

F +81 3 5220 7270INDIAOffice No. 312 & 313, 3r floorManjeera Majestic Commercial, KPHB,JNTU, Hi-Tech City Road,Hyderabad - 500085T. +914 042 410 172

FRANCEZAC de la Clef de saint Pierre5, rue du groupe Manouchian78990 ÉlancourtT +33 (0)1 3013 1870 F +33 (0)1 3062 5477

BANGLADESHSuit No. B-4 (4th Floor)Anam Rangs PlazaPlot No.61, Road No.6/ADhanmondi, Daka 1209F +88 02 8192078

ITALYVia Girardi 2720025 Legnano, MilanoT +39 033 145 5241F+ 39 033 144 0752

MEXICOMoliere #330-403Col. Polanco ReformaCP 11540Mexico, D.F.T +(52-55) 5282 2678

www.telstar.com

Containment Isolators

Telstar systems are commissioned to operate at their optimal level, assuring you of maximum safety and technical performance. To maintain this exceptional quality we offer valuable inspection, re-testing and preventative maintenance packages that protect your investment and productivity.

Containment is an ever more important part of any pharmaceutical process and a clear understanding of that process is paramount to its success. Invariably this entails containing all aspects of the manufacturing process, so being able to provide a fully integrated system with third party OEM equipment is vital.

Telstar excels in providing complete systems with other equipment manufacturers and as such has developed standard integration designs and techniques.

Previous integrated packages include:

•Blending

•Milling

•Sieving

•Tabletting

•Capsule filling

•Freeze drying

•Filling machines

MALAYSIA17A & 17BJalan PJS 1/3246150 Petaling JayaT +66 111 271 3669

Containment Barrier Systems

With the accelerated production of highly potent pharmaceutical drugs, the need for containment technology and interest in Isolators is on the increase.

Telstar has the expertise to meet the rising challenges by offering an impressive range of containment Isolators, from single chambers to multi chamber systems accommodating where necessary a wide range of process equipment.

The production site where the products are made has been assessed and given ISO 9001:2008 approval

All equipment is manufactured to allow it to be CE marked in accordance with 98/37/EC Machinery Directive.

Fully Compliant

Telstar Containment Systems are guaranteed to comply with relevant standards and demands set by the regulatory bodies to ensure conformance and clients satisfaction, including:

• ISO 14644-1 Cleanroom & Associated Controlled Environment

• FS 209E Airborne Particulate Cleanliness• cGMP Guidelines (current Good Manufacturing

Practices)• FDA (Food and Drug Administration)• MCA (Medical Control Agency)• ISPE guidelines (The Society of Pharmaceutical and

Medical Device Professionals)• American Glovebox Society Guidelines• FDA 21CFR Part 11

Telstar provides a comprehensive validation service to clients providing FAT/SAT/DQ/IQ/OQ & PQ protocols if required.

Telstar Barrier Containment Isolation

Designed to provide operator protection from airborne particles and Potent APIs for a wide range of process applications, with and without integrated process equipment including:

• Dispensing / Weighing / Sampling

• Sieving / Blending

• Charging / API Addition

• Mixing / Granulation

• Centrifuge

• Freeze Dryer Off-Load / Pack-Off

• Filter Dryer Off-Load / Pack-Off

• Milling / Micronising

• Tabletting

• Final Packing / Blister Pack

Isolators for API’s and cytotoxic compounds have been

independently verified to achieve operator protection

levels down to 0.2ng/m3 (0.0002 µg/m3)

Telstar Isolators are designed to provide a locally controlled environment operating at negative pressure, with the ability to control and monitor all operating parameters. Providing protection to the operator and the external environment from the highly potent products.

Designed, manufactured, supplied and installed - high quality stand alone or integrated systems with or without process equipment, offering cost efficient customised and standard solutions.

Multi Chamber Weighing, Dispensing& Sampling Isolator

Product loading is a critical process in all barrier containment systems. At Telstar we are familiar with the many specific requirements and challenges presented during Pharmaceutical API production.

Drum loading via an inflatable seal with an internal door is just one of a variety of solutions available, providing an airtight seal to ensure the integrity of the Isolators internal negative pressure conditions.

PLC based control systems utilising a Siemens PLC platform is offered as standard complete with I/O according the specific equipment providing a fully automated system, supported by Ethernet communication enabling critical parameters to be communicated to an external DCS system.

A fully compatible Touch Panel HMI provides operator interface, for control, indications, display of Isolator conditions and alarm handling. Located in a suitable position on the Isolator service plenum it is easy to reach and observe by operators.

The Telstar Glove Tester device enables both in situ and off line testing of gloves, if fitted to a Telstar glove ring. This simple device works solely on air to test the glove integrity.

The system consists of a glove port test plug with inflatable seal, which is inserted into the glove port. The seal is inflated making an air tight seal to the glove port. The glove is inflated to a test pressure and the pressure decay of the glove is monitored over a period of time. At the end of this test period the pressure decay is recorded and the leakage rate of the glove determined.

The Telstar Glove Tester is available as an integrated device (Isolator dedicated) and alternatively a mobile device to serve multiple Isolators.

Telstar contained transfer system (CTS), independently tested to below 0.2 nanograms offers ultimate safety, simplicity of operation and is easy to decontaminate.

The active port is designed to be used with a passive canister and or bag in / bag out grommet connection. The purpose of the port is to allow contained transfer of materials to and from the Isolator or waste out of the Isolator in a controlled manner, without breaking containment, ensuring operator protection from the internal environment at all times.

Spray guns and rotating spray balls for WIP are offered as an option for manual cleaning / decontamination of the Isolator.

Available in PFA or stainless steel the wash guns are suitable for use in all Telstar Isolators handling pharmaceutical compounds.

Triclover service entries complete with manually operated ball valves will be supplied in the wall of the Isolator for connection of the clients WIP media and in the base of the Isolator for connection of the clients WIP drain outlet.

Dispensing & Transfer Isolators with WIP/DIP Skid

ISO 9001: Certified CompanyBR-CONTAINMENT-ISOLATORS-EN-0319Telstar reserves the right to improvements and specifications changes without notice.

SPAINHeadquarters Av. Font i Sagué, 5508227 Terrassa (Spain)T +34 937 361 600

F +34 937 861 380

Santibáñez de Béjar, 308042 MadridT +34 913 717 790F +34 913 717 791

PORTUGALEstrada Consiglieri Pedroso, 71Edificio D-6º Esq2730-055 Barcarena, LisboaT +351 214 350 854F +351 214 350 089

BRAZILAv. Ermano Marchetti, 1435Zandar 05038-001Sao PauloT+ 55 113 4612 1997

NORTH AMERICA1504 Grundy's LaneBristol PA 19007T +1 (215) 826 0770

F +1 (215) 826 0222

UNITED KINGDOMUnit 4, Shaw Cross BusinessPark, Horace Waller VC Parade,Dewsbury, West YorkshireWF12 7RFT +44 (0)1924 455 339F +44 (0)1924 452 295CHINA

No. 30 Jin Wen Road,Zu Qiao Airport Industrial Park,Pudong District201323 ShangaiT +86 21 58 093 731F +86 21 58 092 857

JAPANAzbil CorporationTokyo Building,2-7-3 Marunouchi, Chiyoda-ku,Tokyo 100-6419,T +81 3 6810 1000

F +81 3 5220 7270INDIAOffice No. 312 & 313, 3r floorManjeera Majestic Commercial, KPHB,JNTU, Hi-Tech City Road,Hyderabad - 500085T. +914 042 410 172

FRANCEZAC de la Clef de saint Pierre5, rue du groupe Manouchian78990 ÉlancourtT +33 (0)1 3013 1870 F +33 (0)1 3062 5477

BANGLADESHSuit No. B-4 (4th Floor)Anam Rangs PlazaPlot No.61, Road No.6/ADhanmondi, Daka 1209F +88 02 8192078

ITALYVia Girardi 2720025 Legnano, MilanoT +39 033 145 5241F+ 39 033 144 0752

MEXICOMoliere #330-403Col. Polanco ReformaCP 11540Mexico, D.F.T +(52-55) 5282 2678

www.telstar.com

The production site where the products are made has been assessed and given ISO 9001:2015 approval.All equipment is manufactured to allow it to be CE marked in accordance with 2006/42/EC Machinery Directive.