AMAZING DEALS ON BIG NAME BRANDS FOR CAR & CV WORKSHOPS

December 2016

0845 602 3436CONTACT YOUR LOCAL ANDREW PAGE BRANCH OR CALL US ON

£2395.00LEASE FROM £12.85 PER WEEK

For use in conjunction with the Bosch KTS range of modules and ESI[tronic]

Parallel Channel CommunicationOne of the major changes in the architecture of the new generation KTS is the ability to use parallel channels to communicate with the vehicle, allowing communication to more than one CAN system simultaneously, speeding up programming and diagnosis. OEMs, such as Ford, Jaguar Land Rover, BMW and many others, are already using this type of communication.

PassThru – Euro 5/6As a solution to avoid purchasing multiple OEM diagnostic devices, the new generation KTS 590 can use PassThru to communicate with the vehicle in the same way as many OEM diagnostic tools. The new generation KTS has been proven to work with these brands:• Jaguar Land Rover • VAG• Mercedes-Benz • BMW• Volvo • Vauxhall. And others (verification ongoing)

Diagnostics over Internet Protocol (DoIP)Diagnostics over Internet Protocol (DoIP) provides communication to the vehicle at variable speeds up to 200 times faster than high speed CAN bus systems. The KTS 560 and KTS 590 are the first products in the independent aftermarket that have DoIP capabilities ensuring that communication to vehicles is possible as OEMs develop this technology in the future.

The ability to communicate at variable speeds using IP baud rate (speed of data transfer) gives the new generation KTS the advantage of being able to process the data using new protocols which has previously not been possible.

NEW! Bosch KTS590Diagnostics are evolving as vehicles become more electronically complex. Therefore a solution is required that is developing at the same rate as these new technologies to successfully diagnose, troubleshoot and repair faults. The new generation KTS 590 satisfies these new technologies with a number of technical features that are only currently available on OEM diagnostic tools.

£1595.00LEASE FROM £8.47 PER WEEK

ESI Software subscription required for operation, please ask for details

Bosch DCU 220:The Pinnacle of Bosch Diagnostics Designed to be powerful yet flexible, the DCU220 combines the features of a traditional notebook with those of a tablet. Easily switching between tablet and notebook mode, the 11.6-inch touchscreen monitor can be turned and rotated, converting into a tablet. However, for more complex diagnostic work, technicians have the use of a conventional keyboard for data entry and data retrieval. The lightweight unit also ensures extra productivity while working on vehicles, thanks to the inclusion of 2 separate lithium-ion batteries. Capable of running on 1 battery, the hot swap function allows a battery to be removed and recharged while the unit is still in use, avoiding any workshop disruption.

Sturdy yet speedyBuilt to be robust, the DCU 220 has gained the IP65 rating, ensuring that it is resistant to a wide variety of contaminants found in workshop environments. As well as being tough, the Windows 7 based unit has a solid state drive, (SSD), along with 4 GB of RAM which enables fast boot up and quick operation.

DCU 220 package includes:• Tablet • USB Cable• External disk drive • Transformer• Recovery DVD • Carry case

December 2016

2 CONTACT YOUR LOCAL BRANCH TO PLACE AN ORDER

LAUNCH UKLAUNCH

The X431 EUROPAD II S is the latest Android based diagnostic tool, which boasts a robust waterproof design with a 10.1 inch ultra-high resolution IPS touch screen. The EUROPAD II S uses the same award winning software as previous Launch X431 scan tools, including vast multi manufacturer vehicle coverage, powerful special functions, accurate and ultra-fast live data and graphing, along with module coding capabilities.

OTHER FEATURES OF THE PAD II INCLUDE:

The Launch X431 Pro III S has been designed to connect vehicles and workshops, using wireless and bluetooth connectivity. A built-in social network service enables users to connect to a community for help with diagnosis, while remote diagnosis is possible with Go-Lo option. Users also have access to a car database and repair tips, allowing for faster and more efficient performance.

OTHER FEATURES OF THE PRO 3 INCLUDE:• Full system diagnosis• Data stream storage and re-display• Coding, reset and programming functions• Diesel particulate filters regen/replacement • VIN recognition, auto search • Real time diagnosis for Go-lo users• Live data recording & multiple graphing• Special functions for specific manufacturers

X431 PRO III S TECHNICAL SPECIFICATIONS:• 10.1 inch Display, 1280 x 800 Resolution, Capacitive touch screen • Lenovo tablet, APQ8009 Quad core processor, running at 1.3Ghz • Supports 64GB Micro SD external memory card• 1 GB of RAM• 16 GB on board storage• 2 megapixel front camera, 5 megapixel rear camera• Android 5.1.1 OS• Wi-Fi enabled• Bluetooth enabled • Go-Lo support

FOR YOUR ON SITE DEMO, CALL 0845 602 3436 NOW

• Launch next generation software suite: OE-Level access to Asian, European and domestic applications for module coding, resets, relearns & bi-directional capabilities • VIN Recognition & auto-ID available on vehicle systems and modules • Real-time remote telematic diagnosis using Go-lo • Customer management software linking to the LAUNCH online user community • Online fault code search & manufacturer possible causes & solution help files

• Built-in vehicle maintenance and repair database• Easy ‘one-click’ updates over Wi-Fi • Class-1 Bluetooth 2.1 connector for optimum wireless connectivity • 10.1 High resolution IPS capacitive touch screen • Optional thermal Wi-Fi printer available & office Wi-Fi printer connectivity • Two year software subscription included with no lock out period • Pre2000 OBD1 & historic cables and connectors• High resolution camera with still and video capabilities

As with all Launch diagnostic tools, the Pro covers a wide range of car models including European, Asian, American and Chinese. It also has a range of powerful test functions and provides extremely accurate test data.

OTHER FEATURES OF THIS TOOL INCLUDE:• High configuration software that allows for high operating speeds• A multi-touch, tablet-style capacitor screen for quick, smooth use• Portable size makes it easy to use and transport• Brand new interface that’s much more user friendly• Users can install any Android software • Also has photo, video and multimedia functions, as well as other

software applications• Can graph live data when in use• Module coding, resets, relearns and bi-directional capabilities

also possible

• Exchanges 99.9% of the transmission fluid• Detergent based cleaning cycle• Automatic flow direction recognition• Incremental fluid level adjustment• 125mm LCD Display• Customer print out• Twin load cells & advanced software for exceptional reliability & accuracy

The Launch CAT501 is supplied with the standard adapter set PLUS the optional set covering the majority of vehicles on the road. All units purchased will include one year FREE access to the Launch UK database. The database shows the transmission type, oil quantity, photographs of the fitting location, correct adapters and oil level check points, the correct procedures are also described.Get equipped with the Launch CAT501S to take advantage of a lucrative opportunity as more manufacturers mandate a complete oil change in their service schedules.

THE NEW LAUNCH CAT501S AUTOMATIC TRANSMISSION CLEANER & FLUID EXCHANGER

OUR SPECIAL OFFER!

£2950LEASE FROM £15.69 PER WEEK*

Part No: CAT501S

DELIVERY ONLY £1475.00LEASE FROM £7.83 PER WEEK*

DELIVERY ONLY £2165.00LEASE FROM £11.49 PER WEEK*

DELIVERY ONLY £1125.00LEASE FROM £5.97 PER WEEK*

Price includes initial set up & delivery only, on site training can be arranged at extra cost

Part No: X431 PRO

Part No: X431 PAD II S

Part No: X431 PRO III S

X431 PAD II SX431 PRO III S X431 PRO

INCLUDES 2 YEARS SOFTWARE INCLUDES 2 YEARS SOFTWARE

December 2016

3WWW.ANDREWPAGE.COM

0845 602 3436

BOSCH

KTS TRUCK: THE MODULAR SOLUTION FOR COMMERCIAL VEHICLESKTS Truck is the ideal entry-level solution for commercial vehicle workshops that already have a PC.

Optimized and mobile diagnostics solution

• KTS Truck module for trucks, light utility vans, trailers and buses• Can be connected to DCU 130, PC or laptop• Integrated Bluetooth connection with large range, up to 100m• Bluetooth USB adapter included in equipment supply• The USB interface means KTS Truck can be connected to all common PCs or laptops• Sturdy housing

DiagnosticsImportant functions for the commercial vehicle workshop are included: Reading / deleting error codes, selecting actual values, activating actuators, resetting service intervals, and teaching components.

Technical dataSupport for troubleshooting: Component information with setpoint values, output voltage, characteristic curves, etc.

Circuit diagramsFast and simple use because of intuitive operation with dynamic component description.

MaintenanceHalf-yearly and yearly inspections with additional check items can be called up at any time.

Spare parts catalogueAlways accessible: The complete spare parts catalogue from Bosch and ZF

Services• Manual and Automatic transmissions• Suspension• Steering• Clutch

Part Number Description Price Saving 5 YR Lease Cost

KTS Truck 12 Months Software KTS Truck with 12 months CV Diagnostics Software £2795.00 £195.00 £14.84

KTS Truck Non Timeout Software KTS Truck with 12 months CV Diagnostics Software £3095.00 £200.00 £16.43

Please Note: Annual ESI(tronic) Truck subscription is required to keep KTS Truck activated.

December 2016

4 CONTACT YOUR LOCAL BRANCH TO PLACE AN ORDER

Part No. Model CFM (disp.)

Receiver ltr Phase HP Bar Offer Price Per

week

S-28DA504FPS032 NB2800B/50/3M Tech 12.5 50 Single 2.2 10 £365.00 -

S-28FA504FPS009 NB2800B/100/3M Tech 12.5 100 Single 2.2 10 £379.00 -

S-28HA504FPS051 NB2800B/150/3M Tech 12.5 150 Single 2.2 10 £425.00 -

S-36HN504FPS012 NB38C/150 FM3 13.95 150 Single 3.0 10 £495.00 -

S-36LN504FPS014 NB38C/200 FM3 13.95 200 Single 3.0 10 £535.00 -

S-36NW505FPS038 NB38/270 TD Tandem 27.9 270 Single 2 x 3.0 10 £1,395.00 £7.40

S-36HN541FPS013 NB38C/150 FT3 13.95 150 Three 3.0 10 £495.00 -

S-36LN541FPS015 NB38C/200 FT3 13.95 200 Three 3.0 10 £535.00 -

S-N7LN701FPS044 NB7/200 FT 5 26.7 200 Three 5.5 10 £795.00 -

S-N7NN801FPS018 NB7/270 FT 7 29.7 270 Three 7.5 10 £995.00 £5.28

S-N1NN905FPS019 NB10/270 FT 10 38.1 270 Three 10.0 10 £1,395.00 £7.40

BELT DRIVEN LUBRICATED – TECH & WORKSHOP SERIESProfessional and heavy duty, low speed workshop compressors.

Features• 13 Amp, single & 3 phase models• 230 and 400 Volts• Fully automatic operation on all Tech series• 3-10HP• 50, 100, 150, 200 & 270 Ltr receivers• Tandem models available• Reduced RPM• 2 Year warranty (T&Cs apply)• Star Delta starting on 10 HP model

BELT DRIVEN LUBRICATED – PULSAR CONCEPT SILENCEDHigher output 3 phase professional silenced compressors offering capacity from 17 Cfm (disp.)

Features• Three phase models

• 270 & 500 Litre receivers

• Floor mounted version available

• Noise levels as low as 69 dB(A)

• 4-10HP

• Star Delta starting available

• 2 Year warranty (T&Cs apply)

• Refrigerated dryer options available

Part No. Model CFM (disp.)

Receiver ltr Phase HP Bar Offer Price Per

week

BZNT601FNN040Pulsar Concept SE BK114-270F-4

17.0 270 Three 4 10 £1,795.00 £9.53

BRNT701FPS031Pulsar Concept SE BK119-270F-5.5

23.8 270 Three 5.5 10 £1,995.00 £10.59

BRNT701FNN224Pulsar Concept SE BK119-270F-7.5

29.7 270 Three 7.5 10 £2,195.00 £11.65

BTTT905FNM953Pulsar Concept BK120-500F-10 SD

38.2 500 Three 10 10 £3,295.00 £17.49

Part No. Model CFM (FAD)

Receiver ltr Phase HP Bar Offer Price Per

weekRECEIVER MOUNTED

F-V77JT60FNM501 MICRO SE 2.2-10 M - 200 8.5 200 Single 3 10 £2,295.00 £12.18

F-V77JT72FNM701 MICRO SE 2.2-10 - 200 10.2 200 Three 3 10 £2,295.00 £12.18

F-V77JQ72FNM701 MICRO SE 3.0-10 - 200 13.6 200 Three 4 10 £2,395.00 £12.71

F-V77JP72FNM701 MICRO SE 4.0-10 - 200 17.1 200 Three 5.5 10 £2,495.00 £13.24

F-V77JP92FNM701 MICRO 4.0-10 - 200 17.1 200 Three 5.5 10 £2,595.00 £13.77

F-V91JO92FNM701 MICRO 5.5-10 - 270 22.9 200 Three 7.5 10 £2,795.00 £14.84

F-V83JO92FNM701 MICRO 5.5-10 - 500 22.9 200 Three 7.5 10 £2,995.00 £15.90

MICRO SERIES - ROTARY SCREW COMPRESSORSBelt driven screw compressor from 2.2 to 5.5 kW

Features• Noise levels as low as 58 dB(A)

• 12,000 Hour Poly-V belts

• Floor, tank mounted & tank mounted with dryer options.

• Star Delta starting from 4 kW

• Electronic controller from 4 kW

• 8,10 & 13 Bar models

• 13 Bar - Floor mounted only

• 2 Year warranty (T&Cs apply)

• Refrigerated dryer option

FREE ON-SITE COMMISSIONING

Part No. Model CFM (FAD)

Receiver ltr Phase HP Bar Offer Price Per

weekRECEIVER MOUNTED

F-V91NH92FNM701 PLUS 8-10-270 35.3 270 Three 10 10 £3,195.00 £16.96

F-V91NM92FNM701 PLUS 11-10-270 53 270 Three 15 10 £3,395.00 £18.02

F-V83NQ92FNM701 PLUS 15-10-500 65.3 500 Three 20 10 £4,195.00 £22.27

F-V83NY92FNM701 PLUS 16-10-500 72.4 500 Three 20 10 £4,495.00 £23.86

RECEIVER MOUNTED WITH DRYER

F-V91NH92FNM801 PLUS 8-10-270 ES 35.3 270 Three 10 10 £3,795.00 £20.14

F-V91NM92FNM801 PLUS 11-10-270 ES 53 270 Three 15 10 £3,895.00 £20.67

F-V83NQ92FNM801 PLUS 15-10-500 ES 65.3 500 Three 20 10 £4,595.00 £24.39

F-V83NY92FNM801 PLUS 16-10-500 ES 72.4 500 Three 20 10 £4,895.00 £25.98

PLUS SERIES ROTARY SCREW COMPRESSORSBelt driven screw compressors from 7.5 to 15kW

Features• Long life energy saving poly V drive system• Compact, modern design• Convenient ETM 2 electronic controller• IE3 Electric motor allowing reduced energy consumption• Easy and convenient service• Floor mounted, receiver mounted and receiver mounted with dryer versions• Star delta starting• Quiet operation• Higher output (13 Bar available)• 8,10 and 13 Bar versions

• 13 Bar - Floor mounted only• Fitted with long life synthetic lubricant

FREE ON-SITE COMMISSIONING

FPS

December 2016

5WWW.ANDREWPAGE.COM

0845 602 3436

RING

CHICAGO PNEUMATIC

CP7732 Ultra Compact & Powerful

• 1/2” Ultra compact impact wrench• Steel front cover & aluminium body• One hand operation forward – reverse by either left or right handed users• 3 Setting positions • Only 4.4’’ long• Jumbo hammerBest power to weight ratio:• 450 ft-lbs / 610 Nm• Easy to use• Durable

Part No: 8941077320

CP7748 Durable, Powerful & Ergonomic• 1/2” Composite impact wrench• One handed forward/reverse• Aluminium clutch & back housing• Friction ring socket retainer• Full teasing trigger• Curved to be more ergonomic, smaller diameter to fit better in palm• Handle with Thermo-Plastic rubber injected in housing for a durable and comfortable grip. Resistant to most chemicals used in workshops• Twin hammer mechanism• 360° Swivel air inlet• Composite housing• 922 ft.lbs – 1,250 Nm of max real torque in reverse• Suited for all maintenance applications: Passenger vehicle and light truck

Part No: 8941077480

OUR SPECIAL OFFER!

£109.95

OUR SPECIAL OFFER!

£159.95

• 3 x 5W LEDs provide 1000 lumens light output• Long operating time allows full working day usage• 3 levels of light output• 6000K Colour temperature for bright white light• 40º Adjustable head to shine light on the engine bay exactly where it is required• 60º Wide angle illumination• Sturdy polycarbonate, ABS and Aluminium construction• Rechargeable 3.7V 10400mAh Li-ion battery• Hook design allows usage with different vehicle types including cars, vans and 4x4s• Illuminated battery status indicator• Includes AC mains adaptor

£59.95Part No: RUBL1000

ONLY

LED CORDLESS UNDER BONNET INSPECTION LAMP

December 2016

6 CONTACT YOUR LOCAL BRANCH TO PLACE AN ORDER

TECALEMIT

2 POST 3.0 TONNE LIFT• Suitable for lifting most passenger cars and car derived vans• 5 Year warranty on self lubricating Nylatron operating and safety nuts• Low minimum lifting pad height of just 90mm• Automatic arm locking • Foot/toe protection device • Heavy duty base frame

• Electronically controlled safety latches• Suitable for general servicing & repairs• Compact space saving design• Suitable for shallow recesses• Includes 2 Tonne jacking beam SS/8825

OUR SPECIAL OFFER!

£5499LEASE FROM £29.19 PER WEEK*

OUR SPECIAL OFFER!

£2195LEASE FROM £11.65 PER WEEK*

TIRO:• Proven performance in tyre shops• Fast and accurate• Suitable for most types of car and car derived van wheels• Pneumatic high pressure bead breaker • Simple control panel for ease of use

WHILE STOCKS LAST!

• Wheel sizes 12”-23”• Measures: Front/rear wheel toe, total toe, set back & rear wheel thrust line• Wall mounted storage• Built in battery charger• Pedal applicator, steering wheel clamp & graduated stainless steel turning plates• Optional caster/camber gauge available for £445 +VAT

Part No: GTR/400/W

OUR SPECIAL OFFER!

£1495LEASE FROM £7.94 PER WEEK*

4 WHEEL LASER ALIGNMENT SYSTEM

WHILE STOCKS LAST!

4 POST 3.5 TONNE SERVICE LIFTPart No: SF9010 Part No: SF/9436/SR

OUR SPECIAL OFFER!

£2549LEASE FROM £13.53 PER WEEK*

WHILE STOCKS LAST!

December 2016

7WWW.ANDREWPAGE.COM

0845 602 3436

HOFMANN MEGAPLAN

ecoline Series• Autodata database for comprehensive vehicle coverage• Customer printout• 19” Colour monitor

• Call for a demonstration

ecoline 58 With traditional 4-point clamps

only £3,995

ecoline 88 With 3-point ‘GrabClamps’ and even faster operation

only £5,495

WHEEL ALIGNMENT

5 Year lease from £21.21pw

5 Year lease from £29.17pw

The ecoline was introduced with a simple design brief, to bridge the gap between laser alignment and fully computerised systems with printout, which traditionally made the price jump too much for many workshops.

Both versions, ecoline 58 and 88, are supplied with a comprehensive vehicle database from recognised industry name, Autodata, and offer a before and after printout. The 88 has the added advantage of having 3-point ‘GrabClamps’ (which mount to the tyre) and an even faster operating system, which puts it alongside competitor machines which are literally twice the price.

Supported by Hofmann Megaplan’s team of Alignment Specialists and supplied with extensive, on-site training, the ecoline series is the ideal choice for any garage wanting to take their alignment business forward without the huge investment usually required.

megaspin 120 Operation: Hand-spinData Input: 3D (Fully-Automatic)Weight Placement: 12 O’clock via Weight Placement ArmBalancing Process: ConventionalMax Rim Size: 30”Power: Dual 12v or 240vStandout Features:Ultra-compact, versatility of handspin operation, specification of top of range machines, 4 Yr PCB warranty

£4995LEASE FROM £26.51 P/W

Saving £595.00 on individual prices.

PREMIUM TYRE PACKAGE OFFER!

megamount Elite • Premium quality, high performance tyre changer • 12” to 26” Clamping (24” external) • unique (patented) bead breaker with Run-Flat/standard settings • ‘megafit 2 xL’ assist arm for handling Run Flats etc • Industrial design with tapered column for max strength • Tool/valve storage box with built-in air gauge • Available in conventional lever or leverless versions

PACKAGE OFFER PRICE

PART NO: ELITE/SPIN120

December 2016

8 CONTACT YOUR LOCAL BRANCH TO PLACE AN ORDER

THERMOBILE

• Clean combustion and high efficiency• High capacity air distribution fans• Supplied with manual dial type remote

thermostat and 5 metres of cable• Optional extra is a digital

thermostat and time control• Summer ventilation facility• Models SB80 and SB110 package includes

motor and pump kit for connection to bulk fuel tank with bottom outlet and a maximum

distance of 15 metres (pipework and electric cable not included). For top outlet bulk tanks and/or distances above 15 metres, a pneumatic pump kit is available at an extra cost

• Complete flue kit provides for approximately 6 metres (19 feet) ground clearance AND NOW includes roof seal & fitting kit plus two wall bands

• Compressed air supply required for burner• Burners adjustable to use heating oil/diesel

AUTOMATIC IGNITION

• High/low manual heat regulation• Efficient, clean, virtually soot-free combustion using:

Used (waste) oil (subject to licensing control), diesel, heating oil or any combination of these

• All models complete with built-in fuel tank, filters & fuel pump

• Equipped with overflow, overheat and flame failure systems• AT400 & AT500 Incorporate a burner drawer

system for easier lighting and cleaning plus a heat exchanger for higher efficiency

• Heaters that have a perforated combustion chamber (models AT306 & AT306THERMO) are not

recommended for use in workshops where there are explosive vapours present (i.e. petrol vapour)

• Combustion air intake kits are available for extra safety in garage workshops, either horizontally through an outside wall or vertically taking air into the combustion chamber from two metres above ground level. Except models AT306 and AT306THERMO

• Complete flue kit provides for approximately 6 metres (19 feet) ground clearance AND is legislation compliant PG1/1(04), includes roof seal & fitting kit plus two wall bands.

MANUAL IGNITION

UNIVERSALOIL HEATERS

MODEL SB40 & SB60

MODEL SB80 & SB110

PART NO.Heat

Capacity(Btu/hr)

Heated Airflow(m³/hr)

Fuel Tank(ltrs)

Fuel Consumption

(ltrs/hr)

Max spaceto be

heated OFFER PRICE

5YR LEASE

PW

AT306PACKAGE 102,000 - 50 3 20,000 £995.00 £5.28

AT306THERMOP 102,000 1000 50 3 20,000 £1,145.00 £6.08

AT307PACKAGE 102,000 1000 50 3 20,000 £1,495.00 £7.94

AT400PACKAGE 146,000 3000 55 4.3 28,000 £2,095.00 £11.12

AT500PACKAGE 210,000 3000 55 6.2 42,000 £2,495.00 £13.24

DEFRA have announced changes to permits for operating Small Waste Oil Burners (SWOBS). For full details contact Andrew Page or visit www.thermobile.co.uk (under NEWS).

PART NO.Heat

Capacity(Btu/hr)

Air Movement

(m³/hr)

Fuel Tank(ltrs)

Fuel Consumption

(ltrs/hr)

CompressedAir

Displacement

ElectricalSupply (volts)

OFFER PRICE

5YR LEASE

PW

SB40PACKAGE 153,000 3,200 80 4.6 1 - 1.3 CFM 230 £3,895.00 £20.67

SB60PACKAGE 204,000 4,100 80 6 1.5 - 1.8 CFM 230 £4,245.00 £22.53

SB80PACKAGE 306,000 6,200 130 9 2 - 2.6 CFM 400 + N £5,995.00 £31.82

SB110PACKAGE 436,000 8,100 130 12.8 3 - 3.6 CFM 400 + N £6,695.00 £35.54

All PRICES ON THIS PAGE ARE SUPPLY ONLY UK MAINLAND – INSTALLATION

AVAILABLE AT ADDITIONAL COST

ALL PRICES ON THIS PAGE

INCLUDE A FLUE KIT

+ 35 Second Heating oil/Diesel+ Processed Fuel Oil (PFO)+ Rapeseed Oil+ Linseed Oil

+ Certain Vegetable Oils+ Used Oil (subject to licensing control)+ Bio Diesel

Thermobile Universal Oil Fired Heaters can be operated on the following:

December 2016

9WWW.ANDREWPAGE.COM

0845 602 3436

• 230v (13amp) Supply• Heavy duty powder coated finish• Steel tank construction• Built-in thermostat with digital temperature read-out • Danfoss fuel pump• External fuel filter

SIP Diesel/Kerosene space heaters• 75,000 BTU/hr (22kW) Heat output• 530m³ (18,717 cu.ft) Approx. Heating area • 2 Litre/hr average fuel consumption

09562 75XD Heater

• 100,000 BTU/hr (29.3kW) Heat output• 700m³ (24,720 cu.ft) Approx. Heating area• 2.8 Litre/hr average fuel consumption

09564 100XD Heater

• 125,000 BTU/hr (36.6kW) Heat output• 900m³ (31,783 cu.ft) Approx. Heating area • 4 Litre/hr average fuel consumption

09566 125XD Heater

• 175,000 BTU/hr (51.3kW) Heat output• 1230m³ (43,437 cu.ft) Approx. Heating area • 5 Litre/hr average fuel consumption

09568 175XD Heater

£249.00

£299.00

£279.00 £379.00

WORKSHOP HEATERS

INDUSTRIAL HEATERS DIESEL / KEROSENE

HRD70Heater output = 70,000 BTU ( 20.52KW)Fuel consumption = 1.7kg/hTank size = 24LtrAir output = 600m3/h

SPECIAL OFFER

£249.00

Part No: HRD70

SPECIAL OFFER

£279.00

Part No: HRD100

Features:-• Mobile air heater• Fuel type diesel or kerosene• Stainless steel combustion chamber with fan cooling• Built in flame sensor• Automatic heater cutoff when fuel is low• Oil display unit• Cut off safety protection

SPACE WARMER DIESEL/PARAFFIN HEATERS100,000Btu/hr (20.5kW) or 100,000Btu/hr (29.3kW) Heat output.

• Clean burning.• Fitted with thermostat and digital room temperature display both given in °C.• Proven pump system can operate with either paraffin, kerosene or diesel.• Fitted with safety cut-out.• Complies with rigorous safety standards.

£279.95

Part No: AB100E

SPECIAL OFFER

£269.95

Part No: AB7081

100,000Btu/hr70,000Btu/hr

SPECIAL OFFER

HRD100Heater output = 100,000 BTU ( 29.31KW)Fuel consumption = 2.5kg/hTank size = 24LtrAir output = 720 m3/h

2 YEAR WARRANTY!

December 2016

10 CONTACT YOUR LOCAL BRANCH TO PLACE AN ORDER

BRADBURY

2 POST ELECTRO-HYDRAULIC LIFTTWO POST LIFT OFFER!

4 TONNE LIFTING CAPACITY!• Automatic arm locking • Anti toe trap devices on arms • Minimum pad height of 110mm • H Type supportive base frame• Available in single or three phase • Suitable for lifting most cars and car derived vans• Includes 1 Year service contract

SINGLE OR THREE PHASE

£1999Part No: DL240

ONLY

LEASE FROM £10.61 PW*

INCLUDES 1 YEAR

SERVICE CONTRACT**

**Service contract consists of two visits - one at 6 months and one at 12 months

December 2016

11WWW.ANDREWPAGE.COM

0845 602 3436

LASER TOOLS

£89.95Part No: 6733

Wheel TrolleyProfessional foldable tyre/wheel trolley. Maximum capacity 8 wheels (up to 22inches) or 8 tyres (140kgs). Fitted with 4 x 4inch castors - 2 with pedal brake. Dimensions: Folded 730mm x 22mm x 170mm and open 730mm x 730mm x 170mm

Trolley JackLow profile 3 ton jack, low entry 85mm with twin pump design for faster lift. Min height 85mm, Maximum height 500mm. Size 690mm x 343mm x 149mm. Weight 34kgs. Conforms to EN1494:2000

£189.95Part No: 6734

Heavy Duty Plastic Car RampsCar ramps 1pair - 2.5 tonne. Maximum tyre width 240mm. TUV/GS approved

£89.95Part No: 6793

£59.95Part No: 6742

Mercedes Locking Wheel Nut Set Locking wheel nut key set for Mercedes Benz. 12 Pieces suitable for tyre fitting bays and garages. 10 x Locking wheel nut key set with socket driver and shaft. Applications include: A Class, B Class, C Class, GLK Class, CLC Class, CLS Class, CLK Class, E Class, SL Class, SLK Class, M Class, C300, C250, C350, E320, 204, 211, 212, R Class. Sizes: M12 x 1.5 x 40mm, M14 x 1.5 x 26mm/26.5mm/46mm/45mm

Part No: 6767

Mercedes Master Locking Wheel Nut Set Locking wheel nut key set for Mercedes Benz Designed for garage or tyre shop use. Coded 301 to 330. Equivalent to OEM B66475331

£259.95

Air Hoses Manufactured from matt finished, super flexible rubber/vinyl hybrid polymer material which lies flat when uncoiled. Resistant to oil, UV rays, abrasion and weather. Silicone free. Fitted with 1/4” or 3/8” BSPT, see below. Max. working pressure 300psi, minimum bursting pressure 900psi. The hose can stand -40° to +60° C

£24.95Part No: 6417

£24.95 £34.95Part No: 6653

Part No: 5587

GEN 2 Wheel Bearing Kit VAG - Master Kit For the removal and installation of 2nd generation hub and wheel bearings. Applications: Audi A2, Volkswagen Lupo, Fox, Polo, Multivan, Toureg, Transporter, Skoda Fabia, Roomster, Seat Ibiza, Cordoba. For 62mm, 66mm, 72mm and 85mm bearings. The extraction adaptor (572-6) for GEN2 bearing kits has been redesigned to allow the extraction of the relevant bearings without removing the ABS sensor

£599.95 Part No: 6795

Combination Wrench Set 32 pce MM/AF in foam tray Combination spanner set 32 pc in Metric /AF size, manufactured from Chrome Vanadium. Contents: Bi Hex Metric combination spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19mm and Stubby 10, 11, 12, 13, 15mm. Plus Bi-Hex AF sizes 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8” and Stubby 3/8”, 7/16”, 1/2”, 9/16”, 5/8”.

£34.95

3/8” x 15m 1/4” BSPT Fitting

3/8” x 15m 1/4” BSPT Fitting

1/2” x 15m 3/8” BSPT Fitting

Part No: 6418

December 2016

12 CONTACT YOUR LOCAL BRANCH TO PLACE AN ORDER

GEDORE AUTOMOTIVE

Ratchet Spanner Set - 12 PieceSpanners with integrated ratchet functionAdaptors which can be used in 10,13 & 19mm spanners Spanner sizes: 8,10,12,13,15,17,18 & 19mmAdaptors: 1/4”, 3/8” & 1/2” Square

£89.95Part No: 1710.2012

£59.95Part No: 7610.1101

Ball Joint PullerSuitable for Mercedes G-Model, S Class (W220), Porsche Cayenne, VW Touareg, Golf IV etcClamping height 2-Stage up to 50mm

£99.95Part No: 7620.1200

Puller with Clamping YokeSuitable for VW-Audi, Seat

Prybar Set - 4 PieceMade from special steel ideal for dismantling stubborn components, positioning components, spreading clamping bores etc.8”,12”,18” & 24” in Length

£34.95Part No: 0483.0004

Hook Assortment - 4 PieceDesigned to ease the removal of O rings, cotter pins, seals and bushes in various automotive applicationThe hooks can also be used for bodywork interior lining.

£11.95Part No: 0485.0004

Screwdriver Set - 6 PieceFor slotted and cross-head screws PZSlotted sizes: 4, 5.5, 6.5 & 8Pozi: 1 & 2

£18.95Part No: 1482300

VDE Screwdriver Set - 7 PieceFor slotted and cross-head screws PHVDE Insulation up to 1000VSlotted sizes: 2.5, 4, 5.5 & 6.5PH: 0, 1 & 2

£29.95Part No: 1616048

December 2016

13WWW.ANDREWPAGE.COM

0845 602 3436

REDASHE

Designed to drain waste oil by either gravity or suction from engines, gearboxes and differentials of all vehicles. The emptying of the drained oil inside the reservoir is air operated. Extracts oil from any vehicle using the venturi extraction system. Includes six suction probes (metal and flexible) equipped with quick couplers for fluid extraction. Self-evacuating feature makes emptying clean and simple.

ONLY

£199.99

Part No: JAODE090E

90LTR 2 IN 1 WASTE OIL

DRAINER

SPECIAL OFFER WHILE STOCKS LAST!

15 Metre hose lenght with 3/8” ID hose. Automatic guide system - no bunching of hose, layers hose from side to side neat and tidy every time.Slow retraction system - prevents hose from speeding back to the reel if the hose is let go - safe operation.Low tension spring latching of hose at any length.Working pressure up to 300 psi (20 bar).

£119.99Part No: C2782

High Visibility Safety Hose Reel

Part No: J2500-HLI

Rechargeable COB foldable light

High capacity Lithium-ion rechargeable battery for longer life and consistent powerStrong Polycarbonate lens and rubberised housing and gripStrong light output, approximately 70 lumensUSB wall plug and cableComes with an integral pen clip and magnet

Rechargeable LED penlight

Part No:J1000-DPL02USB

£49.99

SPECIAL PACKAGE DEAL!

Part No: JTWIN

• 3 Watt single strip COB LED bulb for a wider and brighter lighting area• 2.4 Watt LED bulb top light offers an additional flashlight function• Lithium-ion rechargeable battery for longer life and consistent power• Light head rotates 180° and pivots 120° to direct light to work area• Super strong magnetic base sticks to steel surfaces • 360° Rotating top hook• Automatic shut-off and overcharge protection for optimum battery life• Tough, impact resistant ergonomic housing• Versatile 2-in-1 charging system• Charge from 120V AC with included USB wall power plug• Charge from USB charging port with included USB cord

PACKAGE PRICE

Professional Work Lights

2YR WARRANTY

December 2016

14 CONTACT YOUR LOCAL BRANCH TO PLACE AN ORDER

SEALEYJuly/August 2016

6 TURN TO PAGE 50-51 TO FIND YOUR LOCAL BRANCH

£55.95

£264.95

£179.95

£89.95£149.95

ElectroStart® Batteryless Power Starts

A B

12V

Model No. OutputOutput Start

Peak (EN)List Price Special Price

A E/START800 12V 800A (400A) £169.95 £119.95B E/START1100 12V 1100A (550A) £233.45 £169.95C E/ESTART1600 12V 1600 (800A) £275.95 £199.95

Model No. Type DepthQuantity of

SocketsContents List Price Special Price

AK2746 1/4’’Sq Drive Standard 13 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm, Socket Rail £16.95 £10.95AK2747 1/4’’Sq Drive Deep 13 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm, Socket Rail £24.95 £15.95AK2741 3/8"Sq Drive Standard 12 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm, Socket Rail £29.95 £17.95AK2743 3/8"Sq Drive Deep 11 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", Socket Rail £26.95 £17.48AK2742 1/2"Sq Drive Standard 13 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm, Socket Rail £24.95 £16.25AK2745 1/2"Sq Drive Deep 13 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm, Socket Rail £68.95 £42.95

• All units can be fully energised in a matter of minutes.• Innovative technology with no internal battery, so

no need to wait hours for the unit to charge before use.• Lightweight and compact for easy handling and

storage, yet still delivers the same result as heavy, bulky, lead acid battery equivalents.

• Manufactured from hardened and tempered high grade Chrome Vanadium 6142 steel.• Fully polished mirror finish for resistance to corrosion.• Feature specially machined flutes in the walls of the socket which

enable use on up to 85% rounded fasteners.• This not only provides added strength but also prevents damage to worn or rusted fixings.

Standard & Deep Lock-On Socket Sets

PATENTED& EXCLUSIVE

TO SEALEY

2000kg

• Foot operated hydraulic unit, with gauge showing force applied to the spring under compression.

• Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications.

• Fitted with plastic yoke protectors that protect the spring coating from damage which can invalidate the vehicle manufacturer’s warranty.

• Suitable for springs from Ø87mm to Ø202mm.

• Maximum Load: 2000kg.• Model No. RE2311• List Price £423.95

Hydraulic Coil Spring Compressing Station with Gauge 2000kg Capacity

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford/Volvo vehicles.

• Can be used in situ without removing the arm from the vehicle.

• Supplied in carry-case.• Model No. VSE4786• List Price £296.95

Trailing Arm Bush Tool - Volvo, Ford

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Vauxhall/Opel vehicles.

• Can be used in situ without removing the arm from the vehicle.• Features a slotted adaptor for visual reference

while in operation.• Supplied in carry-case.• Model No. VSE4787• List Price £211.95

Trailing Arm Bush Tool Vauxhall/Opel

• Suitable for the removal/installation of the front lower suspension pivot arm bush.

• Can be used in situ without removing the aluminium hub carrier from the vehicle.

• Model No. VSE4785• List Price £95.45

Front Pivot Arm Bush Tool Peugeot 407/508, Citroen C5/C6

• The go-through design of the socket and ratchet allows the extension to pass through the middle.

• To be used in conjunction with a 1/2"Sq drive ratchet or T-bar (not included).

• Go-Through Ratchet: 21mm.• Go-Through 82mm Deep Sockets: 16, 17, 18, 19, 21, 22, 24mm.• Extensions: Female Hex; 7, 8, 9mm,

Male Hex; 6, 7, 8mm, Slotted; 5 x 8, 6 x 8, 7.1 x 9.6mm, TRX-Star*; T50.

• Model No. VS0331• List Price £127.45

18pc Shock Absorber Strut Nut Kit

C

or or

Model No. AK2747

Model No. AK2741

or

December 2016

15WWW.ANDREWPAGE.COM

0845 602 3436

WELZH WERKZEUG

• Torx: T6, T8, T10, T15, T20, T25, T27, T30, T40, T45,T55, T60, T70• Torx Plus: T8H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H, T55H, T60H• Tamper Proof Torx: 8IP, 10IP, 15IP, 20IP, 25IP, 27IP, 30IP, 40IP, 45IP, 50IP, 55IP, 60IP• E-Torx: E4, E5, E, E7, E8, E10, E12, E14, E16, E18, E20, E22, E24• Suitable for use with air tools. Made from impact resistant S2 steel

52-Piece Master Torx Set

£43.95Part No: 1165-WW

• Allows easy testing for leakage in radiator system and quick change of coolant • Unit is suitable for car and commercial vehicles • Colour coded radiator test caps make it easy to choose the suitable test cap for the job• Special design of vacuum purge & reel tool connection covers nearly all types of radiator connector• Test Range 35 psi 2.5 bar• Adaptors for the following vehicles are included: Mercedes Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW,BMW, Ford, Opel, Porsche, Audi, etc.

24 Piece Radiator Pressure and Cooling System Tester

£169.95Part No: 1005-2-WW

• Applications: Diesel engines: up to 3.0ltr Petrol engines: up to 6.5ltr• Mains or 12v charging • Dimensions: 17 x 18 x 15.5 cm• Weight: 5.1kg Digital meter: display voltage 3 to 30 v Output: 12v (DC) max/ 10A : 5v USB/max 2A• Instant max current 1200A• Charging power: AC 100 240v, 50/60Hz, CE/UL, PSE• Battery: ACID, DC 12v/14aH

Mini Emergency Car Starter 12V

£159.95Part No: 1120-WW

12 & 24 Volt Heavy Duty Extreme Starter

£199.9512v-24v Part No: 1121-WW

• The impact wrench is designed to deliver low torque in 4 stages (10, 20, 30, 40 nm). • The use of vibrations and torque will allow easy removal of stuck glow plugs. • The level of torque will stop the shearing of the glow plug head.• Impact Gun: 20 to 40nm • Deep Sockets: 8, 9, 10, 11, 12 mm• Extension Bars: 50 & 100mm• Universal Joint: 1/4 inch

Impact Vibration Glow Plug Removal Gun Including Sockets 8-12 mm

£109.95Part No: 4121-WW

• Superior quality components guarantee reliability and high levels of safety • Starts up to 30 cars before recharging is needed*• Impact resistant, durable and robust casing • LED Power level indicator• Automatic charger with smart circuit which allows the unit to be left in continuous charge without incurring damage 12v/24v

• For use on electrical circuits (12/24v) • Sharp stainless steel needle allows easy access to circuits • Can be used on cars, vans, boats, RVS & many other 12/24v circuits• Small ergonomic design allows for easy portability • Digital LED display• Cable length: 11ft, Voltage: DC 12-24v

Digital LCD 12-24V Wide Range Circuit Tester

Part No: 1126-1-WW

£16.95 £159.9512v Part No: 1122-WW

Andrew PageApson House, Colton Mill, Bullerthorpe Lane, Leeds LS15 9JNTel: +44 (0) 113 3970210Fax: +44 (0) 113 3970298Email: info@andrewpage.com

Company Registration No. 10403406

• Lease example: Tecalemit SF9010/H two post 3.0 tonne lift – Offer Price £2195.00 5 Year Lease Plan: Advance Rental £50.49 + VAT, followed by 59 rentals of £50.49 + VAT, weekly equivalent £11.65 + VAT. Set up and document fees apply, please ask for details.*Lease prices quoted applicable to limited companies only• All lease rental prices shown are weekly equivalents assuming advance rental equivalent to 1 months rental and all subsequent rentals payable monthly.• Lease figures may vary according to status and are for illustration purposes only.• All lease transactions are subject to a documentation fee.• All prices shown are subject to VAT and subject to status.• All offers are subject to availability and applicable to UK mainland only, certain postcodes may incur an additional charge.• All offers available until 31st December 2016.• All pictures shown are for illustration purposes only.• Any additional costs incurred concerning LOLER, PUWER and BS7980 regulations are the customers responsibility.• Please make sure your site meets the relevant requirements for the equipment purchased. If in doubt please contact your area GE Specialist.• Prices and specifications subject to change without notice.PART NO: MM2016-2 • E and OEwww.andrewpage.com

Specialist Tool Solutions

OFFER: £1595.00SAVE £608.00

AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT

HAND COILS

SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN

FULL HEIGHT STEEL SAFETY GATES

LENGTH OF TRAVEL: 330MM

UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON

EXTRA-LONG STRUT ASSEMBLIES

TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING

4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCE

UP TO 2452KG OF FORCE (AT 10 BAR) AT THE PRESS

OF A PEDAL

ADJUSTABLE STRUT VICE WITH4 x SETTING OPTIONS

INTERCHANGEABLE JAWS / VICE TO SUIT DIFFERENT SPRINGS

SPRINGS HAVE EVOLVED...HAVE YOUR TOOLS?

HEAVY DUTY PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION 385800AC

Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WD’s and LCV’s. Includes 2 x standard brackets (78-130mm / 125-205mm) and 1 x strut vice

SIMPLY THE BEST...

ANDREW PAGE ADDED VALUE PACKINCLUDES...38780100

385800-61

Adaptor Bracket Set• Suitable for Mercedes C Class (W203) up to 2007 • Compatible with new range of Mercedes brackets 38480800 / 38480900 / 38481000

Swivel Arms - Pair• Mounts onto top arms in place of standard top jaws & contacts directly onto spring• Jaw ‘floats’ to follow changes in spring angle / profile during compression

385800-60

38480200

Arm Extender - Pair• Mounts between original top arm and jaw attachment• Use to extend the length of the top spring mounting jaw position

Upper Jaw Set• For high compression and close coil springs (Toyota / Honda etc)

3858COVER

Protective Cover• Fits over workstation for protection

WORTH £458.00!