Contact us via : vip@sollaFAQ and trouble shooting steps of SOLLA Camera Floodlight. I. WIFI...
4
FAQ and trouble shooting steps of SOLLA Camera Floodlight. I. WIFI Connecting This is a series of screenshots shows the steps of a connecting. Contact us via : [email protected]
Transcript of Contact us via : vip@sollaFAQ and trouble shooting steps of SOLLA Camera Floodlight. I. WIFI...
FAQ and trouble shooting steps of SOLLA Camera Floodlight.
I. WIFI Connecting This is a series of screenshots shows the steps of a connecting.
Contact us via : [email protected]
II. Enable the motion sensor lighting & alarm function. This function is set off by default. You’ll need to enable it in the app. Here’s the how. 1. Device setting - Alarm config - enable “PIR sensor alarm” Enable “Camera Alarm Tone” if you want it alarm when it detects motion; Enable “Receive Alarm Message”so that your phone will get notification when it detects motion. Alarm Schedule: set when the motion alarm setting will work Alarm interval: set the interval between 2 alrams, the default value is recommended. On-Screen Display: shows time and camera name on the monitor screen if you enable it. 2.Make sure the brightness of the light is not set to the loweset level (off). The light will be on at your last brightness setting when it detects motion. So please do not set it to the lowest level . in a word, if you want to use the motion sensor function remember to enable the “PIR sensor Alarm”and set the brightness to a proper level.
Contact us via : [email protected]
III. User interface This shows the function of every button in the monitoring screen.
IV. What kind of card do I need to purchase? This light supports a High Speed Micro SD card(Class 10) with storage no more than 64 Gb
Contact us via : [email protected]
V:FAQ(will update) 1. Where to get the app Android: Google Play iOs: App Store
2. -Is it possible to re-aim the camera from the app? -No.
3.-What is “work LED” and should it be on or off? -Working status indicator of the motion sensor, and it will not affect the light: if you set it to on, you can see the motion sensor has a red dim light so you know it's working.
4.-What does the “alarm schedule” control? -set when the alarm function will work, just easily set the start time and end time or disable it to get a 24 hours alarm work.
5.-The pictures are all up side down, can it be corrected? -You can flip the monitoring screen horizentaly/vertically in the app. (Triangle Icon)
6. -What does the “alarm interval” mean? -It decides how often the light will send notice to you. e.g. If you set it to 30S, it will not send alarm to you in 30s after the last notice.
Contact us via : [email protected]
