CONSTRUCTION TESTING SPECIAL INSPECTION SERVICES

AASHTO Accredited

21 Randolph Ave, Avenel, New Jersey 07001 * Phone: 732-815-0400 * www.aelinc.net

Easton Area School District

1801 Bushkill Drive

Easton, PA 18040

FOR:

CONSTRUCTION TESTING

&

SPECIAL INSPECTION SERVICES

Project:

New Palmer Elementary School

Easton, PA

April 14, 2021

AASHTO Accredited

______

21 Randolph Ave, Avenel, NJ 07001 * Ph: 732-815-0400 * www.aelinc.net initials

Pag

e 1

April 13, 2021

Easton Area School District

1801 Bushkill Drive

Easton, PA 18040

Attention: Mr. Michael Simonetta, Chief Operating Officer

Reference: New Palmer Elementary School

Easton, PA

Subject: Construction Testing and Special Inspection Services

Dear Mr. Simonetta:

Atlantic Engineering Laboratories Inc. is pleased to submit the following company

information and proposal for your review and consideration. AEL strives to provide our

clients with sound technical support in a timely, cost effective manner.

AEL is a full service testing laboratory, inspection agency and geotechnical

engineering firm. We provide independent third-party testing and inspection services on

projects throughout New Jersey, New York and Southeastern Pennsylvania.

All of our services are provided under the direction of Mr. Christopher T.

O’Malley, P.E. a registered professional Engineer licensed in New Jersey, New York and

Pennsylvania. We have over 50 inspectors throughout Pennsylvania available to support

your project needs and we are capable of providing all required quality control inspections

and testing with our own forces.

AEL’s laboratory is located in Avenel, New Jersey approximately one hour from

the projct site and has inspection staff that live within a twenty to thirty mile radius of the

new school building. AEL was founded in 2004 and currently employs 200+ employees.

http://www.aelinc.net/

AASHTO Accredited

21 Randolph Ave, Avenel, NJ 07001 * Ph: 732-815-0400 * www.aelinc.net

Atlantic Engineering Laboratories, Inc. (AEL) Project Understanding

AEL has reviewed the Request for Proposal documents, plans, specifications,

sketches, Chapter 17 Special Inspections, Uniform Construction Code Special

Inspections and Observations Statement, and the Geotechnical Report prepared by

Maser Consulting dated September 5, 2017. We understand the concerns raised in the

geotechnical report. As a part of our review of the specification sections careful

attention was paid to Section 02.5700-Sinkhole Remediation and Section 31.6230-

Compaction Grouting Part 1, along with the other specifications sections. We believe

we now have a clear understanding of the project requirements.

The new Palmer Elementary School will be a three story 95,000 SF building

consisting of concrete foundations, steel framing, slab-on-grade concrete construction,

and masonry wall both interior and exterior. After asbestos abatement and building

demolition, in addition to the new building, the project will entail site work, utilities,

underground storage tank removal, storm-water facilities, parking lots, and

multipurpose fields. AEL will perform full service construction inspection and testing

services as requested per the project phasing plans under the direct supervision of a

licensed Pennsylvania Professional Engineer.

During the construction of the new elementary school special inspections will

be performed for concrete, masonry, and structural steel bolting and welding. Non-

destructive testing of steel will include magnetic particle and ultrasonic testing on

welds as required. Floor flatness/floor levelness will be performed on cast-in-place

concrete slab areas as needed. Laboratory testing will be performed on concrete

cylinders, grout cylinders, and masonry prisms.


AASHTO Accredited


AEL intends to assign one of our senior soils technicians to the project to

inspect the ongoing earthwork/foundation operations. The soils technician will

determine the suitability of the on-site sub-soil for use as fill and backfill. Soil samples

will be transported to our laboratory and tested for sieve analysis, #200 wash test,

Atterberg limits, and classification. A proctor test will then be performed on approved

soil samples.

In accordance with the geotechnical report and project specifications, our soils

technician will observe subgrade preparation, proofrolling operations, areas to be over-

excavated and extent of backfill required. During this process our soils technician will

be in contact with our field engineers and geotechnical engineer. Site inspection by our

senior staff will be undertaken as needed after consulting and receiving approval from

the Construction Managers representative. Additional services will include but not

limited to approval of on-site and off-site fill, over excavated areas under structure

bearing surfaces, footing bottom inspection to verify bearing capacity requirements,

assist in rock removal issues, inspect sinkhole formations, discuss mitigation solutions

with senior staff, and any other geotechnical issues as they arise. Soils technician will

perform soil compaction-density testing on cuts/fill operations, footing paved areas, and

any other areas requiring compaction tests.

Inspection of site work will include concrete testing for sidewalk, curbs, and

other miscellaneous concrete locations. Asphalt paving will include field inspection

services to include thickness measurements, temperature checks, and density testing

with a nuclear densometer. Asphalt cores will also be tested to document conformance

with the project specifications.

Resumes of key personnel, recent construction projects, and other company

information have been attached for you use and review (See Attached).


AASHTO Accredited

______


Fee Schedule

of 10

SCOPE OF SERVICES – UNIT PRICES

A. Earthwork

1. Determine suitability of on-site subsoil for fill and backfill.

2. Observe the subgrade preparation, recommend methods for the proof rolling operation for thespecific situation and make the final determination regarding what areas need to be over-excavated,to what extent and the backfill required. The specifications contain requirements which need to beverified and modified for each condition by a competent geotechnical engineer. No excavation ispermitted until the subgrade preparation is complete.

3. Review and approve off-site and on-site soil. Fill not approved by the Geotechnical Engineer shallbe removed. Provide final determination as to whether a surface is too wet. Provide geotechnicalsolutions for miscellaneous fill and backfill placement issues.

4. Correction of over-excavated areas under structure bearing surfaces.

5. Inspect footing subgrade and verify it meets the bearing capacity requirements of the subsurfaceinvestigation report. Verify excavation is prepared to receive concrete; all loose materials must beremoved.

6. Assist in solving any rock removal issues, which may occur.

7. Inspect sinkhole formations and provide geotechnical solutions to mitigate.

8. Provide geotechnical inspection and approval of any other geotechnical issues not specificallylisted above.

9. Verification and inspection of all subgrades (foundations, paved areas, and building), and fill layersbefore further construction work is performed, including determination of required design bearingcapacities.

a. Testing and Inspection Services per hour: $_______________________

b. Testing and Inspection Services per half day: $_______________________

c. Testing and inspection Services per full day: $_______________________

10. Laboratory compaction:

a. Per ASTM D698 per sample, including all costs: $_______________________

b. Per ASTM D1557 per sample, including all costs: $_______________________

11. Inspection and testing of soil and/or imported structural fill placement, including required in-placefields density tests for cut/fill operations, footings, paved areas, building slabs, detention basins,etc.

a. Per hour: $_______________________

b. Per half day: $_______________________

c. Per full day: $_______________________

55.00

160.00

320.00

150.00

200.00

55.00

160.00

320.00

of 10

B. Asphalt Concrete Paving

1. Field inspection and compaction testing (nuclear) of asphalt concrete paving.

a. Per hour: $_______________________

b. Per half day: $_______________________

c. Per full day: $_______________________

2. Core sampling and analysis of in-place asphalt concrete paving for conformance with ProjectSpecifications.

a. Per sample: $_______________________

C. Concrete

1. Concrete field inspection, including verification and testing of slump air content, concretetemperature, reinforcing, steel placement, and concrete placement and curing.

a. Per hour: $_______________________

b. Per half day: $_______________________

c. Per full day: $_______________________

2. Making and testing compressive strength concrete cylinders in conjunction with above services.

a. Set of five (5) cylinders: $_______________________

3. Floor flatness and levelness.

a. Per hour: $_______________________

b. Per half day: $_______________________

c. Per full day: $_______________________

D. Masonry

1. Field inspection of construction methods and materials, including joint construction, anchorage tofootings, alignment, bracing, flashing, weep holes, reinforcing, cell grouting, bond beams, wallopenings, and wall ties.

a. Per hour: $_______________________

b. Per half day: $_______________________

c. Per full day: $_______________________

2. Making and testing grout specimens per ASTM C1019 and C143.

a. Set of four cubes: $_______________________

3. Making and testing masonry prisms per ASTM E447.

a. Set of four units: $_______________________

55.00

160.00

320.00

200.00

50.00

160.00

300.00

75.00

125.00

500.00

500.00

55.00

160.00

320.00

50.00

300.00

of 10

E. Structural Steel

1. Field inspection and testing of bolts and welds, and field inspection of steel framing, includingcolumns, trusses, joists, metal deck, and other related material. Field review of welding: visuallyinspect all welds; ultrasonic testing of 25% of welds, and magnetic particle testing, as required.Field review of steel frame: verify plumbness, location of anchor bolts, etc. Review for generalconformance to Plans and Specifications.

a. Per hour: $_______________________

b. Per half day: $_______________________

c. Per full day: $_______________________

F. Hourly rate for attendance at meeting or other task when approved by Construction Manager.

a. _________________________________________ $________________ per hour Category of Professional

b. _________________________________________ $________________ per hour Category of Professional

c. _________________________________________ $________________ per hour Category of Professional

d. _________________________________________ $________________ per hour Category of Professional

e. _________________________________________ $________________ per hour Category of Professional

G. Cost of second/additional on-site service, i.e., additional test when technician already on site:

$_______________________

All of the above rates shall be effective April 2021 through September 2023.

80.00

320.00

550.00

Field Engineer

Professional Engineer

75.00

125.00

No Charge

AASHTO Accredited

______


Similar Projects

AASHTO Accredited


REFERENCES The following is a brief l ist of school projects where AEL has performed Special

Inspections and Material Testing services:

Camden High School

1700 Park Blvd.

Camden, New Jersey

Heery International

Contact: Erick Schlaufman

Phone: (484) 374-5595

Cost: $130,000,00

Total Fees To Date: $257,352.83

Completion Date: Fall 2021

Project Size: 230,000SF (Two-Story Building)

Performed Soil, Concrete, Reinforcing Steel, Masonry, and Structural Steel Inspections & Testing

Trenton Central High School 400 Chambers Street

Trenton, New Jersey

Heery International

Contact: Erick Schlaufman

Phone: (484) 374-5595

Cost: $155,000,000

Total Fees: $394,739.55


Project Size: 350,000SF

Performed Soil, Concrete, Reinforcing Steel, Masonry, and Structural Steel Inspections & Testing

Orange High School 400 Lincoln Avenue

City of Orange, New Jersey

Anser Advisory

Contact: Will Marsan

Phone: (908) 343-3626

Cost: $37,000,000




Performed Soil, Footing Bottom, Concrete, Reinforcing Steel, Masonry, Structural Steel, and Asphalt

Paving Inspections & Testing


AASHTO Accredited


REFERENCES

Perth Amboy High School

901-959 Convery Bvld.

Perth Amboy, New Jersey

Anser Advisory

Contact: Darren Spitzkoff

Phone: (908) 875-0532

Cost: $250,000,000




Performed Soil, Footing Bottom, Concrete, Reinforcing Steel, Masonry, Structural Steel, and

Asphalt Paving Inspections & Testing

Northern Burlington High School

169 Mansfield Rd. Columbus, New Jersey

New Road Construction

Contact: Chuck Romanoli

Phone: (609) 760-1787

Cost: $40,000,000



Project Size: 93,000SF (Addition/Renovation)

Performed Soil, Footing Bottom, Concrete, Reinforcing Steel, Masonry, Structural Steel, and

Asphalt Paving Inspections & Testing


AASHTO Accredited

______


Proposed Staffing &

Company Certifications


AASHTO Accredited

21 Randolph Ave, Avenel, New Jersey 07001 * Phone: 732-815-0400 * www.aelinc.net 1001 Avenue of the Americas, 11

th Floor, New York, NY 10018

Atlantic Engineering Laboratories, Inc.

PROFESSIONAL RECORD

CHRISTOPHER T. O’MALLEY P.E.

EXPERIENCE:

2004 - Current ATLANTIC ENGINEERING LABORATORIES INC.

Avenel, New Jersey

Vice President and Principal

Supervise technical services.

Train field and laboratory staff.

Prepare geotechnical and forensic proposals.

Direct geotechnical & forensic services, prepare reports.

Review & certify test reports.

Procure equipment and subcontractors.

Maintain quality program.

Recent projects:

2019-2020 Ocean County On-Call

Rockefeller University – Drilled Micropiles

Southwest Brooklyn MTS – Driven Piles

91st Street Marine Transfer Station – Caissons, Drilled Minipiles

DSNY Garage – Drilled Piers and driven piles-

Brooklyn Bridge Park – Micropiles

Rutgers/Rowan University - Camden

Holtec Technologies - Camden

2000-2004 U.S. ENGINEERING LABORATORIES INC./DIVISION

OF US LABORATORIES

Rahway, NJ

President – Northeast Region

Overall responsibility for 4 regional offices in New Jersey and Pennsylvania

performing construction materials testing and geotechnical engineering.

Annual volume of 8.2 million with 120 employees.

Instrumental in growing annual revenues an average of 30% per year.

Primary client contact for sales and technical operations in New Jersey.

Reviewed, negotiated and executed all contracts with clients.

Managed administrative staff.

Directed sales and marketing efforts.

Supervised technical services.

Implemented and maintained active risk management and loss prevention

programs.

Supervised receivables efforts.

AASHTO Accredited




1994-2000 U.S. ENGINEERING LABORATORIES INC./DIVISION

OF U.S. LABORATORES

Rahway, NJ

Vice President – Northeast Region

Managed the New Jersey operation of the Northeast Region. Annual volume of 5.0

million with 70 employees.

Client contact for sales and technical operations in New Jersey.

Negotiated and reviewed all client contacts

Responsible for sales and marketing efforts in New Jersey.

Director of technical services.

Interviewed, hired and trained technical and administrative personnel.

Performed formal evaluations of all employees.

Served as project manager for New Jersey projects.

Served as Radiation Safety Officer for entire company.

Education: Widener University – Chester, Pennsylvania

Bachelor of Science – Civil Engineering

Professional

Organizations

American Concrete Institute (ACI)

American Welding Society (AWS)

American Society of Civil Engineers (ASCE)

American Society of Foundation Engineers (ASFE)

Concrete Reinforcing Steel Institute (CRSI)

Licensing Registered Professional Engineer – New Jersey – License #40728

New York - License #080821

Pennsylvania – License #062602

ACI Concrete Field Testing Technician - Grade 1

ACI Concrete Construction Special Inspector

ACI Aggregate Testing Technician – Level 1

ACI Concrete Laboratory Testing Technician – Level 1 & 2

ACI Concrete Strength Testing Technician

AASHTO Accredited


PROFESSIONAL RECORD

Dilip Doshi

CERTIFCATIONS:

Troxler Electronic Laboratories Certified Nuclear gauge

operator.

NJDCA Certified Concrete Placement Inspector

ACI Certified Concrete Field Testing Inspector – ACI#: 01189268

EXPERIENCE: 2007- Present ATLANTIC ENGINEERING LABORATORIES, INC.

Avenel, NJ

Inspector

Responsible for performing field inspection and quality

control testing of concrete perform slump, air and temperature

tests on fresh concrete. Fabricate test cylinders. Inspected

reinforcing steel for conformance to approved project and

shop drawings. Inspect footing subgrades using penetrometer.

Test soil density and moisture using a nuclear densometer.

Prepare technical reports.

Recent Representative Projects West Side Lofts, Red Bank, NJ

Prudential Office Tower, Newark, NJ

Prudential Parking Garage, Newark, NJ

NJIT Wellness & Events Center, Newark, NJ

Elizabeth Academic High School, Elizabeth, NJ

Novartis Pharmaceuticals, East Hanover, NJ

2003-2005 US Engineering Lab

Site Technician Prepared sample cylinders of concrete, mortar and grout.

Tested soil compaction using nuclear density gauge. Checked

reinforced steel on site.

Education: Bachelor of Science in Civil Engineering

Shivaji University, Maharastra

Certified Auto CAD Drafter

AASHTO Accredited



PROFESSIONAL RECORD Shardul Brahmbhatt

CERTIFICATIONS:

Troxler Electronic Laboratories Certified Nuclear gauge operator

Compaction and Density Certification

ACI Concrete Field Testing Technician- Grade 1

ICC Masonry Certified Inspector

EXPERIENCE:

July-2017- Present ATLANTIC ENGINEERING LABORATORIES, INC. Avenel, NJ

Inspector

Prepare technical reports. Perform various types of construction

material testing and Inspections in the applications of masonry,

concrete, soils, and asphalt inspections.

Review contractors inspections and methods to ensure construction

activities are in accordance with design plans, specifications and

contractual requirements.

1992-2013 AATARUT ENGINEERING CONTRACTORS

Gujarat, India

Engineer

Worked in various projects performing highway construction

on bridges, factories and the bridge over the Narmada Canal in

India. Experience in various elements of construction eg:

concrete grades, stone block & bricks, masonry, soil

embankment, excavation, prestress concrete, pile foundation

and well sinking foundation and raft foundation.

Education: GOVERNMENT POLYTECHNIC

Mumbia, India

Mechanical Engineering Diploma

AASHTO Accredited


PROFESSIONAL RECORD

Melvin Moises

CERTIFCATIONS:

Troxler Certified Compaction & Density Inspector

Troxler Certified Nuclear Gauge Operator

ACI Grade I Concrete Field Testing Technician

DCA Certified Concrete Inspector

EXPERIENCE: (19 Years Field Experience)

August 2013 - Present ATLANTIC ENGINEERING LABORATORIES, INC.

Rahway, NJ

Geotechnical Inspector

Observe and Monitor fill/backfill placement & compaction process

Inspect Footing subgrades using Penetrometer

Evaluate material suitability

Monitor Construction and backfill of retaining walls, embankment

construction, basin construction and utility backfill.

Observe and document condition of building pad subgrades.

Monitor subgrades for evidence of sinkholes and observe

remediation of subsurface voids.

Representative Recent Projects

Welsbach GGM – Superfund Site, Gloucester City, NJ

Logistics Park, Piscataway, NJ

Prologis Warehouses, Carlisle, PA

Nova Engineering – Kenilworth, NJ

2004-2013

Senior Inspector

Responsible for providing footing bottom inspections, pile driving

inspections, soil compaction, concrete (plant and field), reinforcing

steel/formwork, masonry and asphalt testing/inspection services on a variety

of government, educational, commercial and industrial projects throughout

U.S. Engineering Laboratories – Rahway, NJ

1999-2004

Senior Inspector

Responsible for providing footing bottom inspections, pile driving

inspections, soil compaction, concrete (plant and field), reinforcing

steel/formwork, masonry and asphalt testing/inspection services on a variety

of government, educational, commercial and industrial projects throughout

AASHTO Accredited


PROFESSIONAL RECORD

Ayman Mikhael

CERTIFCATIONS:

Troxler Electronic Laboratories Certified Nuclear gauge

operator

ACI Certified Level 1 Concrete Inspector – ACI#: 01199351

NJDCA Certified Reinforced Concrete Special Inspector

NJDCA Certified Concrete Placement Inspector

NJDCA Certified Structural Steel & Bolting Inspector

NJDCA Certified Structural Masonry Inspector

NJDCA Certified Spray Applied Fireproofing Inspector

ICC Certified Reinforced Concrete Special Inspector

ICC Structural Masonry Special Inspector

ICC Certified Structural Steel Bolting Inspector

ICC Certified Spray Applied Fireproofing Inspector

10 Hour OSHA Certification

EXPERIENCE:

2007- Present ATLANTIC ENGINEERING LABORATORIES, INC.

Avenel, NJ

Structural Steel/Bolting Inspector

Performs field and shop inspections of structural steel.

Inspects erection, corrosion protection, painting, fire

protection, and fire stopping systems. Performs field testing of

paint, galvanizing and other coatings for thickness and

adhesion. Inspects high strength bolting in accordance with

AISC requirements.

Concrete/Masonry Inspector

Responsible for performing field inspection and quality

control testing of concrete. Perform slump, air and temperature

tests on fresh concrete. Fabricate test cylinders. Inspected

reinforcing steel for conformance to approved project and

shop drawings. Inspect footing subgrades using penetrometer.

Inspect masonry systems for compliance with the

specifications drawings and building code. Test soil density

and moisture using a nuclear densometer. Prepare technical

reports.

AASHTO Accredited


1989-2005 EGYPTIAN TRANSIT AUTHORITY

Project Manager

Performed structural analysis and developed schemes, reports,

estimates and MPT plans. Coordinated different project tasks,

including monitoring budgets, invoicing, progress reports and

client correspondence. Prepared conceptual plans for the

emergency walkways. Performed field evaluation of

structures. Managed construction inspection crews that

monitor the construction activities for quality and

conformance to specification. Performed shop drawing

reviews during the bridge construction. Performed the required

material testing and compaction testing on site.

1990-1994 J.A.M. CORPORATION

Project Engineer

Estimated project costs negotiated and finalized deals with

customers. Supervised engineers, foremen and work crews in

build/design electro-mechanical projects.

1986-1989 EGYPTIAN ARMY

Cairo, Egypt

Project Manager

Performed field evaluations, repair recommendations, load

ratings, superstructure repair details and post design services.

Managed and completed projects within designated time and

budget constraints.

EDUCATION: Bachelor of Science Degree – Civil Engineering

Assuit University, Assuit – Egypt.

AASHTO Accredited



PROFESSIONAL RECORD

Dilip Patel

CERTIFICATIONS:

Roofing Inspector

ICC Certified Structural Steel and Bolting

10 Hour OSHA

TWIC Card

EXPERIENCE:

August 13’ - Present ATLANTIC ENGINEERING LABORATORIES, INC.

Avenel, NJ

Senior Field Inspector – Steel / Roofing

Performs inspections during and after installation of EPDM and

similar single ply and built up roof systems for conformance to the

manufacturer’s requirements, project drawings, specifications and

any additional specified details.

Performs field and shop inspections of structural steel. Inspects high

strength bolting in accordance to AISC requirements. Inspect erection,

corrosion protection, painting and fire protection.

Performs field testing of paint, galvanizing and other coatings for

thickness and adhesion.

Representative Projects (Roofing):

JC Penny, Jersey City, NJ

Logistics Park – Bldg 5, Piscataway, NJ

1400 Randolph Ave, Avenel, NJ

2012- 2013 NOVA ENGINEERING; Senior Field Inspector

Kenilworth, NJ

Conducted inspections of bolting/welding connections and

reinforcing steel.

AASHTO Accredited


PROFESSIONAL RECORD

Eustace December

Certifications:

ICC Certified Structural Steel & Bolting Inspector – ICC#: 8020546

ICC Certified Spray-applied Fireproofing Inspector – ICC#: 8020546

NJDCA Certified Structural Steel Bolting Inspector

NJDCA Certified Spray-applied Fireproofing Inspector

Roofing Inspector Experience: 2013 – present ATLANTIC ENGINEERING LABORATORIES, INC. Avenel, NJ Senior Inspector Performs field and shop inspections of structural steel. Inspects high strength bolting in accordance to AISC requirements. Inspects erection, corrosion protection, painting and fire protection. Performs field testing of paint, galvanizing and other coatings for thickness and adhesion.

Performs inspection of roof systems for conformance to manufacturer’s requirements, project drawings and specifications.

Representative Projects:

Prudential Tower, Newark, NJ Rahway Metro Tower, Rahway, NJ Red Shaw Elementary School, New Brunswick, NJ Rutgers University – Honors College, New Brunswick, Nj Dick Sporting Goods, Wayne, NJ Elizabeth Academic High School, Elizabeth, NJ Henry Street Elementary School, Passaic, NJ

2006 – 2013 VERTICAL V Kenilworth, NJ Structural Steel Inspector

Performed field and shop inspections of structural Steel. Inspected high strength bolting in accordance to AISC requirements. Performed field testing of paint, galvanizing and other coatings for thickness and adhesion.

Education: University of Guyana

AASHTO Accredited

______


Company Certifications

AASHTO Accredited

______


Company Insurance Certificates

07/01/2019

Athena Insurance Agency LLC

119 S Emerson St., #379

Mount Prospect, IL 60056

Daniel Effrein

847.954.2030 224.318.2168

[email protected]

Atlantic Engineering Laboratories Inc.

Atlantic Engineering Laboratories of NY, Inc.,

21 Randolph Avenue

Avenel, NJ 07001

Continental Casualty Company 20443

American Casualty Company of Reading, PA 20427

National Union Fire Ins Co. of Pittsburgh, PA 19445

Continental Insurance Company of New Jersey 42625

A x

x

x Blanket Additional Insured

x Contractual Liability

x

X x 6045333664 7/1/2019 7/1/2020

2,000,000

300,000

10,000

2,000,000

4,000,000

4,000,000

B

x

x x

X x 6045333700 7/1/2019 7/1/2020

1,000,000

C x

x

x 10,000

BE 066072138 7/1/2019 7/1/2020

10,000,000

10,000,000

D Professional Liability MCH591862494 7/1/2019 7/1/2020 Per Claim $5,000,000

Annual Aggregate $5,000,000

General Liability is primary and written on a non-contributory basis.

SB146932F Blanket Additional Insured - Liability Extension to include Blanket Waiver of Subrogation

SB300120C Additional Insured - Owners, Lessees or Contractor with Completed Operations Coverage

<JAD>

ANY PROPRIETOR/PARTNER/EXECUTIVEOFFICER/MEMBER EXCLUDED?

INSR ADDL SUBRLTR INSR WVD

DATE (MM/DD/YYYY)

PRODUCER CONTACTNAME:

FAXPHONE(A/C, No):(A/C, No, Ext):

E-MAILADDRESS:

INSURER A :

INSURED INSURER B :

INSURER C :

INSURER D :

INSURER E :

INSURER F :

POLICY NUMBERPOLICY EFF POLICY EXP

TYPE OF INSURANCE LIMITS(MM/DD/YYYY) (MM/DD/YYYY)

GENERAL LIABILITY

AUTOMOBILE LIABILITY

UMBRELLA LIAB

EXCESS LIAB

WORKERS COMPENSATIONAND EMPLOYERS' LIABILITY

DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (Attach ACORD 101, Additional Remarks Schedule, if more space is required)

AUTHORIZED REPRESENTATIVE

EACH OCCURRENCE $DAMAGE TO RENTED

COMMERCIAL GENERAL LIABILITY $PREMISES (Ea occurrence)

CLAIMS-MADE OCCUR MED EXP (Any one person) $

PERSONAL & ADV INJURY $

GENERAL AGGREGATE $

GEN'L AGGREGATE LIMIT APPLIES PER: PRODUCTS - COMP/OP AGG $

$PRO-POLICY LOCJECT

COMBINED SINGLE LIMIT$(Ea accident)

BODILY INJURY (Per person) $ANY AUTO

ALL OWNED SCHEDULED BODILY INJURY (Per accident) $AUTOS AUTOS

HIRED AUTOSNON-OWNED PROPERTY DAMAGE $AUTOS (Per accident)

$

OCCUR EACH OCCURRENCE $

CLAIMS-MADE AGGREGATE $

DED RETENTION $ $

WC STATU- OTH-TORY LIMITS ER

E.L. EACH ACCIDENT $

E.L. DISEASE - EA EMPLOYEE $If yes, describe under

E.L. DISEASE - POLICY LIMIT $DESCRIPTION OF OPERATIONS below

INSURER(S) AFFORDING COVERAGE NAIC #

Y / N

N / A(Mandatory in NH)

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORETHE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED INACCORDANCE WITH THE POLICY PROVISIONS.

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIODINDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THISCERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS,EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THISCERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIESBELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZEDREPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.

IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must be endorsed. If SUBROGATION IS WAIVED, subject tothe terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to thecertificate holder in lieu of such endorsement(s).

COVERAGES CERTIFICATE NUMBER: REVISION NUMBER:

CERTIFICATE HOLDER CANCELLATION

© 1988-2010 ACORD CORPORATION. All rights reserved.

The ACORD name and logo are registered marks of ACORDACORD 25 (2010/05)

CERTIFICATE OF LIABILITY INSURANCE

CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY)

07/10/20

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

PRODUCER Aon Risk Services, Inc of Florida 1001 Brickell Bay Drive, Suite #1100 Miami, FL 33131-4937

CONTACTNAME: Aon Risk Services, Inc of Florida PHONE(A/C, No, Ext): 800-743-8130

FAX (A/C, No): 800-522-7514

EMAIL ADDRESS: [email protected]


INSURER A : New Hampshire Ins Co 23841 INSURED ADP TotalSource CO XXI, Inc. 10200 Sunset Drive Miami, FL 33173 L/C/F Atlantic Engineering Laboratories Inc. 21 Randolph Ave Avenel, NJ 07001

INSURER B :

INSURER C :

INSURER D :

INSURER E :

INSURER F :

COVERAGES CERTIFICATE NUMBER: 2844057 REVISION NUMBER: THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. LIMITS SHOWN ARE AS REQUESTED.

INSR LTR

TYPE OF INSURANCE ADDL INSR

SUBR WVD

POLICY NUMBER POLICY EFF

(MM/DD/YYYY)POLICY EXP

(MM/DD/YYYY)LIMITS

COMMERCIAL GENERAL LIABILITY EACH OCCURRENCE $

CLAIMS-MADE OCCUR

DAMAGE TO RENTED PREMISES (Ea occurrence) $

MED EXP (Any one person) $


GEN'L AGGREGATE LIMIT APPLIES PER: GENERAL AGGREGATE $ POLICY PROJECT LOC PRODUCTS - COMP/OP AGG $ OTHER $


COMBINED SINGLE LIMIT(Ea accident) $

ANY AUTO BODILY INJURY (Per person) $

OWNED AUTOS ONLY

SCHEDULED AUTOS BODILY INJURY (Per accident) $

HIRED AUTOS ONLY

NON-OWNED AUTOS ONLY

PROPERTY DAMAGE (Per accident) $

$

UMBRELLA LIAB OCCUR

EACH OCCURRENCE $

EXCESS LIAB CLAIMS-MADE AGGREGATE $

DEC RETENTION $

A

WORKERS COMPENSATION AND EMPLOYERS' LIABILITY ANY PROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? (Mandatory in NH) If yes, describe under DESCRIPTION OF OPERATIONS below

Y / N

N / A

WC 027129037 NY

07/01/20

07/01/21

X PER STATUTE OTH-

ER

E.L. EACH ACCIDENT $ Unlimited

E.L. DISEASE - EA EMPLOYEE $ Unlimited

E.L. DISEASE - POLICY LIMIT $ Unlimited

DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) All worksite employees working for ATLANTIC ENGINEERING LABORATORIES INC., paid under ADP TOTALSOURCE, INC’s payroll, are covered under the above stated policy.


Atlantic Engineering Laboratories Inc. 21 Randolph Ave Avenel, NJ 07001

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.


© 1988-2015 ACORD CORPORATION. All rights reserved.ACORD 25 (2016/03) The ACORD name and logo are registered marks of ACORD

CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY)

07/10/20

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

PRODUCER Aon Risk Services, Inc of Florida 1001 Brickell Bay Drive, Suite #1100 Miami, FL 33131-4937

CONTACTNAME: Aon Risk Services, Inc of Florida PHONE(A/C, No, Ext): 800-743-8130

FAX (A/C, No): 800-522-7514

EMAIL ADDRESS: [email protected]


INSURER A : Insurance Company of the State of PA 19429 INSURED Atlantic Engineering Laboratories Inc. 21 Randolph Ave Avenel, NJ 07001

INSURER B :

INSURER C :

INSURER D :

INSURER E :

INSURER F :

COVERAGES CERTIFICATE NUMBER: 3049518 REVISION NUMBER: THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. LIMITS SHOWN ARE AS REQUESTED.

INSR LTR

TYPE OF INSURANCE ADDL INSR

SUBR WVD

POLICY NUMBER POLICY EFF

(MM/DD/YYYY)POLICY EXP

(MM/DD/YYYY)LIMITS

COMMERCIAL GENERAL LIABILITY EACH OCCURRENCE $

CLAIMS-MADE OCCUR

DAMAGE TO RENTED PREMISES (Ea occurrence) $

MED EXP (Any one person) $


GEN'L AGGREGATE LIMIT APPLIES PER: GENERAL AGGREGATE $ POLICY PROJECT LOC PRODUCTS - COMP/OP AGG $ OTHER $


COMBINED SINGLE LIMIT(Ea accident) $

ANY AUTO BODILY INJURY (Per person) $

OWNED AUTOS ONLY

SCHEDULED AUTOS BODILY INJURY (Per accident) $

HIRED AUTOS ONLY

NON-OWNED AUTOS ONLY

PROPERTY DAMAGE (Per accident) $

$

UMBRELLA LIAB OCCUR

EACH OCCURRENCE $

EXCESS LIAB CLAIMS-MADE AGGREGATE $

DEC RETENTION $

A

WORKERS COMPENSATION AND EMPLOYERS' LIABILITY ANY PROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? (Mandatory in NH) If yes, describe under DESCRIPTION OF OPERATIONS below

Y / N

N / A

WC 027114724 NY

07/01/20

07/01/21

X PER STATUTE OTH-

ER

E.L. EACH ACCIDENT $ Unlimited

E.L. DISEASE - EA EMPLOYEE $ Unlimited

E.L. DISEASE - POLICY LIMIT $ Unlimited

DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) Minimum Premium Policy Minimum Premium Policy


Atlantic Engineering Laboratories Inc. 21 Randolph Ave Avenel, NJ 070010

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.


© 1988-2015 ACORD CORPORATION. All rights reserved.ACORD 25 (2016/03) The ACORD name and logo are registered marks of ACORD

CONSTRUCTION TESTING SPECIAL INSPECTION SERVICES

Documents

Transcript of CONSTRUCTION TESTING SPECIAL INSPECTION SERVICES