Construction of a boccia chute
-
Upload
cristina-lopez -
Category
Sports
-
view
45 -
download
2
Transcript of Construction of a boccia chute
CONSTRUCTION OF A BOCCIA
CHUTE.
MATERIAL FACILITATOR OF THE ACTION
2
STAGES OF DEVELOPMENT OF A BOCCIA CHUTE
The steps for the construction of the chute are:
1. Tick plywood area where they will go the guides using a pencil.
Image 1
2. Mark the holes in the plywood, previously measured.
Image 2
3
3. Place White glue between the guides and the plywood and secure with
locking pliers.
Image 3
4. Screw the plywood to guides using the screwdriver.
Image 4
4
5. Stand the Wood using sandpaper.
Image 5
6. Sawing vertical corner of the timber base to the hinge bases can be
used without any problems.
Image 6
5
7. Apply reinforcement in the vertical wooden base so that the hinge has a
greater range of motion. Such reinforcement is done with the use of a
wooden block.
Image 7
8. Mark the different heights of the chute.
Image 8
6
9. Run drilling them.
Image 9
10. Attach the base of the chute with the use of brackets.
Image 10
7
11. Place the slip material base to avoid damage and prevent it can slide.
12. Paint the chute. We used green and yellow colours.
Image 11
13. Join the parts.
Image 12
8
MATERIALES Y HERRAMIENTAS NECESARIOS
MATERIAL TOOLS Screws Screwdrivers
Plywood Visa Grips
Guides Sandpaper
Whitetail Brace
Pencil Hammer
Hinges Subway
Squads Saw
Drill
Cat
Wood painting