CONNECTING WITH CONFIDENCEmedia.klinkmann.fi › catalogue › en › Rockwell ›...

CONNECTING WITH CONFIDENCE™

WITH ALLEN-BRADLEY® I/O MODULES

www.klinkmann.com6 / 2011

Your input/output requirements change everyday. In today’s industrial environment, there isa rapid pace of product innovation, moreemphasis on distributing the I/O throughoutthe application, and a greater importancebeing placed on the communications network.

At the same time, you are being asked to produce quality products faster. Reduce inventories, lower training costs and spendless money on maintenance. At RockwellAutomation, our challenge is to help you reach those goals. We are the only companythat offers the experience with world-class I/Oproducts for virtually every need. Choose fromI/O that is distributed around the applicationor integrated with the controller. Allen-BradleyI/O offers the greatest advantage with thepower of the NetLinx™ Open Networks.

Whether you choose a ControlLogix® orCompactLogix® programmable automationcontroller, a PLC-5®, SLC™ 500, or MicroLogix™

programmable logic controller, or theGuardLogix™ safety programmable controller,each offers I/O that you can install locally inthe same chassis as the processor. Additionally,through the use of I/O communication networks, you can also distribute I/O in locations remote from the processor, closer tothe sensors and actuators, reducing yourwiring costs.

Having the freedom to monitor and controlI/O across an I/O link means you can selectI/O products from a variety of platforms thatinclude a variety of integrated terminationsolutions.

Rockwell Automation also offers a wide selection of more granular distributed, In-Cabinet™ (IP20) I/O for use in your control system. These range from simple 4 I/O blocks up to 128 I/O blocks, to modularI/O that offers increased flexibility for yourexact needs, or intrinsic safety. For mountingOn-Machine™, we offer a line of hardened(IP67/69K) block or module I/O to reduce your wiring and system costs.

In addition, you can take advantage of ourDeviceLogix™ Smart Component Technologythat integrates low cost logic solving capability in your I/O. DeviceLogix-enabledI/O performs simple control functions locallywithout the performance constraints typically imposed by a centralized controller and a communication network.

Rockwell Automation also offers distributedsafety I/O modules, including I/O that can belocated on the machine close to sensors andactuators, controlled from a safety PLC. A distributed safety I/O module continuouslymonitors its internal functions to make cer-tain that it is functioning and available if asafety demand is placed on the system. It alsoprovides valuable detailed diagnostic information to the machine operators andmaintenance personnel making troubleshooting easier and thereby improvingoverall machine utilization.

CONFIDENCECONNECTING WITH CONFIDENCE™ WITH ALLEN-BRADLEY I/O


1756 ControlLogix I/OThe 1756 ControlLogix I/O product line provides a full range of digital,diagnostic digital, analog, and motioncontrol I/O to meet your application

needs in a modularassembly.Any of the I/Omodulescan be used in the localchassis

of a ControlLogix processor. With theexception of the motion control modules, these modules can be usedin a chassis linked to a ControlLogixprocessor across ControlNet™ orEtherNet/IP™ networks in a ControlLogix system.

The ControlLogix I/O system has beendesigned to incorporate the latest state-of-the-art features to provideunsurpassed performance and functionality when interfacing to your sensors and actuators.

Advanced diagnostics withuser-configurableoutput response(last value or anyuser-definedvalue) providesafe reactions to amodule fault.Field-side faultdetection can verify properoutput point operation and validate wiring tosensors and actuators. Integral time-stamping allows you to keep track ofwhen inputs change state to determinea sequence of events and to schedule output transitions whenever they are required.

Chassis-based I/O is

specifically designed for

a particular processor,

as part of its family.

Allen-Bradley chassis-

based I/O systems are

also capable of being

mounted away from the

controller via networks.

Chassis-based I/O is

specifically designed for

a particular processor,

as part of its family.

Allen-Bradley chassis-

based I/O systems are

also capable of being

mounted away from the

controller via networks.

Compact I/O

ControlLogix I/O

SELECTIONSCHASSIS-BASED I/O


1769 Compact I/OThe 1769 Compact I/O modulescan be used in an assembly withCompactLogix controllers, 1769-ADNDeviceNet™ adapter module, or aMicroLogix 1500 controller. Unlessconnected directly to a MicroLogix1500 base, each bank of I/O modules

must include its own powersupply.

Modules mechanically locktogether by means of a tongue-and-groove design and have anintegrated communication busthat is connected from moduleto module by a moveable busconnector. Each I/O modulecan be individually removed

from the front for replacement. Inaddition, each I/O module includes abuilt-in removable terminal block witha finger-safe cover for connections toI/O sensors and actuators.

1755 GuardPLC 2000 I/OThe 1755 GuardPLC™ 2000 I/O productline offers digital, analog and countermodules for the GuardPLC 2000controller. As many as six I/O modulesmay be added to the basic GuardPLC2000 system. All I/O can be tested bythe CPU to ensure system integrity.Safety-related inputs are automaticallysubjected to a high-grade, cyclical self-test in GuardPLC 2000 systemsduring operation. These test routinesare TÜV approved and help ensure thesafe function of the respective module.The GuardPLC 2000 systemcan provide as many as 144digital inputs and 96 digitaloutputs. Programming isaccomplished with theRSLogix Guard PLUS!Programming andConfiguration Software.

1771 Universal I/OThe 1771 Universal modular productline provides a full range ofI/O – over 150 types – for awide variety of applications.These modules can be usedin a processor-resident localI/O chassis of a PLC-5controller, at a locationremote from the processorin an I/O chassis with a1771-ACN15 or -ACNR15 I/Oadapter on a ControlNetlink with the processor, or at a

locationremote fromthe processorin an I/O chassis with a 1771-ASB I/O adapter on a UniversalRemote I/Olink with theprocessor.

With 1771 I/O, you do not need to disconnect wiring to replace a moduledue to its Removal & Insertion UnderPower (RIUP) features. For somemodules, wiring arms are shippedwith I/O modules and, with others,remote termination panels areavailable. 1771 I/O also include optical coupling and filter circuitry for signal noise reduction.

1746 SLC I/OThe 1746 I/O product line provides

more than 60modules tomeet yourapplicationneeds in a modularassembly.These modules can be used in a local

I/O chassis of a SLC™ modular-hardware controller; at a locationremote from the processor, in an I/O chassis with a 1747-ACN15 or -ACNR15 adapter ona ControlNet linkwith the processor;or at a locationremote from theprocessor, in an I/O chassis with 1747-ASB adapteron a UniversalRemote I/O linkwith the processor.

The hardware platform sharingmakes spare parts stocking convenient. Thecombinations of input and outputs in thesame digital andanalog modules provide expansioncapabilities without sacrificing space or increasing your costs.

In addition, the 1746 I/O modulesinclude optical coupling and filtercircuitry for signal noise reductionand removable terminal blocks withmodules of 16 or more I/O.

1762 MicroLogix 1100 I/O1762 MicroLogix 1200 I/OIf an application requires more I/Othan the built-in I/O provided bythe MicroLogix 1100 or MicroLogix 1200 controller, you can connect up to four 1762 expansion I/O modulesto the MicroLogix 1100 controllers (in any combination); and up to six modules to the MicroLogix 1200 controller (within the current loading capacity of the MicroLogix 1200 controller’s built-in power supply).

These modules provide theexpandability, as well as the flexibilityto address cost-sensitive applicationswith up to 80 digital points, for the

MicroLogix 1100, and over 128 I/O digital points for the MicroLogix 1200.

MicroLogix 1100/1200expansion I/O modulesinclude an integralhigh-performance I/Obus. Software keyingprevents incorrectpositioning withinthe system. Plus, eachexpansion I/O moduleincludes finger-safeterminal blocks forwiring and a label to record terminal designations.1762 MicroLogix 1100

& MicroLogix 1200 I/O

SLC I/O

Universal I/O

1755 GuardPLC 2000 I/O


1734 POINT I/OPOINT™ I/O is a family of modular I/O modules that offer just-what-you-need granularity, in 1, 2, or 4point increments, providing you with reduced system cost and size.

Its compre-hensive diagnosticsand configurablefeaturesallow you toeasily applythe productto anyautomation

system to lower engineering coststhrough standardization due to its fit with Integrated Architecture.

POINT I/O can be used in remotedevice panels, local control panels, or it can be accessed from many locations including the Internet. Each assembly can be expanded up to a maximum of 504 channels.

POINT I/O is available on the NetLinx architecture and other open networks. Its DeviceNet solutions offer adapter/ bridge modules as well as a low-cost starterblock with 16 integrated I/O circuits.

Distributed I/O can be mounted

In-Cabinet (IP20), requiring an

enclosure, or On-Machine™

(IP67/69), not requiring

an additional enclosure for

environmental protection and

allowing easier maintenance.

Both Distributed I/O types are

offered in modular and block

I/O styles. Modular I/O is

a system of interface cards

and communications adapters

that interface directly to the

sensors and actuators of

the machine/process and

communicate their status to the

controller via a communication

network. It allows the

designer to mix and match

I/O interfaces and

communications adapters.

Block I/O is a complete

assembly of sensor and

actuator interface points

including a network adapter.

It may or may not include a

power supply and is available

in fixed configurations.

Distributed I/O can be mounted

In-Cabinet (IP20), requiring an

enclosure, or On-Machine™

(IP67/69), not requiring

an additional enclosure for

environmental protection and

allowing easier maintenance.

Both Distributed I/O types are

offered in modular and block

I/O styles. Modular I/O is

a system of interface cards

and communications adapters

that interface directly to the

sensors and actuators of

the machine/process and

communicate their status to the

controller via a communication

network. It allows the

designer to mix and match

I/O interfaces and

communications adapters.

Block I/O is a complete

assembly of sensor and

actuator interface points

including a network adapter.

It may or may not include a

power supply and is available

in fixed configurations.

POINT I/O

SELECTIONSIN-CABINET I/O


1794 FLEX I/OFLEX™ I/O is a highly reliable, cost effective, modular I/O system thatoffers all the functions oflarger, rack-based I/Owithout the spacerequirements. With FLEX I/O, you can independently select theI/O type, termination,and network to meetyour application needs.

With over 60 catalognumbers and a widebreadth of specialtymodules, this product is a perfect fit for hundreds of applications.It complements all Allen-Bradley processorplatforms for a distributed I/O solution.

You can use as many aseight terminal bases per adapter for a maximum of 256 I/O. This flexibility provides a wide variety of I/O channels per adapter. You can mixand match digital, analog, and specialtyI/O to meet your specific needs.

1797 FLEX Ex I/OFLEX Ex™ I/O takes advantage of themodular FLEX I/O platform and

combines it withIntrinsic Safety(IS) technology. It can be distrib-uted throughout hazardous areas(Class I, II, andIII/Divisions 1 and Zones 1 or22), along with a single or redundant fiber or coaxial cable, to accommodatecommunicationwith control systems in safeareas. The endresult is optimumperformance andmore cost savingsfor you.

This I/O product provides functional,galvanic isolation between the I/Obackplane, input circuitry, and powersupply. Each FLEX Ex module has conformal coating to provide protection against corrosive elements.It provides lower life cycle costs since it eliminates standalone barriers andisolators, marshalling cabinets, longwiring runs and cable trays – resultingin approximately 40% savings.

With advanced diagnostics, FLEX Exprovides real-time status reports forquicker and easier troubleshooting.You are able to realize faster commissioning with simplified engineering drawings, documentation,and site certification coupled with a reduction in wiring errors.

1791D/R/P CompactBlock I/O1790D/P CompactBlock LDX I/OHandling 24 VDC and analog applications on three networks, theCompactBlock™ I/O line offers an easy-to-use solution for applicationssuch as material handling, conveyors,packaging, or where space is limited.The digital base modules are availablein 4-16 points of VDC per block with abuilt-in network adapter. Digital expansion modules are available with 4-16 points of VDC per block and the analog expansion modules offer 4inputs and 2 outputs.

CompactBlock I/O provides higherperformance and more benefits than other block I/Oproducts. It has IEC/NEMA Type3+inputs to offer thewidest range of compatible sensors. ItsDeviceLogix SmartComponentTechnologyenables localized,simple control functions for fastersense-to-actuationtimes, and higherenvironmental specifications.

CompactBlock LDXI/O offers you adiverse solution forlight industrial andcommercial automation environments where high-protection specifications and advanced performance features are not required.

Offering a wide breadth of field devices,the digital modules expand up to fourblocks and will support up to 64 pointsof I/O. Analog modules offer up to 4channels of current or voltage inputand support two additional digital modules of up to 32 points ofI/O. CompactBlock LDX is compatiblewith a broad range of sensors (Type 3 for DC, type 1 for AC).

1791DSCompactBlock Guard I/OCompactBlock Guard I/O is available ina variety of 24 VDC I/O densities and provides all the advantages of traditional distributed I/O for complexsafety systems. Guard I/O reduceswiring costs and startup time for alltypes of safety devices like Allen-BradleyGuardmaster® light curtains, area scanners, gate interlocks, E-stops, etc.You can use Guard I/O with any controller that communicates via DeviceNet Safety. Guard I/O isindependently certified by TUV for functional safety up to SIL 3 / Category 4. It has been optimized for

use in GuardLogix, GuardPLC, andSmartGuard 600 systems.

A Guard I/O modulecontains digital I/O circuits, a power supply, DeviceNet I/Oadapter, and offerspoint-level diagnosticsto simplify troubleshooting of all input and output circuits.

Take advantage of CIP Safety to easily integrate safety andstandard control systems by allowing a mix of safety andstandard on the same

wire over DeviceNet, ControlNet andEthernet/IP.

The configuration of Guard I/O is simplewith easy-to-use configuration screensand automatic generation of tags.

FLEX Ex I/O

FLEX I/O

CompactBlock™ LDX I/O

CompactBlock™ Guard I/O


1738 ArmorPoint I/OThe architecture of ArmorPoint® isbased on the POINT I/O system andreuses the circuitry of the adapter andI/O designs. Its configuration alsoreuses the methodology employed in POINT I/O so that you leverage theknowledge of the POINT IP20 system

in applyingtheArmorPointIP67 system, saving youvaluabletrainingcosts. In addition,all features

of POINT I/O, including diagnostics,are available in ArmorPoint.

The ArmorPoint family includes hardened power supplies to allow forisolation – AC from DC, analog fromdigital, inputs from outputs. It willsupport NetLinx architecture, as well as other open networks.

Module replacement is simple sincemodules are held on the base by aunique latching mechanism that easilyreleases and pushes the I/O moduleright off the base; the new replacementmodule is then just pushed onto the base.

On-Machine (IP67) control is

the placement of automation

components directly on a machine

rather than housing them in a

remote, central cabinet.

Rockwell Automation makes

this possible through the

emergence of more modular,

compact devices, plug-

and-play connectivity, flexible

communication networks,

intelligent devices and a wide

array of products with

improved environmental ratings.

On-Machine components can

include everything from

programmable controllers,

motor starters, drives, sensors,

and contactors, to network

media, distribution boxes and

I/O, as well as HMI devices.

On-Machine solutions offer you

reduced wiring and system costs,

improved Mean Time to Repair

(MTTR), enhanced control system

reliability, increased productivity

and greater flexibility.

On-Machine (IP67) control is

the placement of automation

components directly on a machine

rather than housing them in a

remote, central cabinet.

Rockwell Automation makes

this possible through the

emergence of more modular,

compact devices, plug-

and-play connectivity, flexible

communication networks,

intelligent devices and a wide

array of products with

improved environmental ratings.

On-Machine components can

include everything from

programmable controllers,

motor starters, drives, sensors,

and contactors, to network

media, distribution boxes and

I/O, as well as HMI devices.

On-Machine solutions offer you

reduced wiring and system costs,

improved Mean Time to Repair

(MTTR), enhanced control system

reliability, increased productivity

and greater flexibility.

ArmorPoint I/O

SELECTIONSON-MACHINE I/O


1792D ArmorBlock MaXum I/OIn addition to the standard features of the hardened ArmorBlock® I/O product line, ArmorBlock MaXum I/O is one of the first I/O products on themarket to take advantage of theKwikLink flat media system for easyinstallation and connection to theDeviceNet communication network.Plus, MaXum offers DeviceLogix for local simple control functions.

The entire system is rated IP67, NEMA4X and 6P giving you the flexibility tomount the sealed-hous-ing blocks directly onthe equipment ormachinery where thesensors or actuators areplaced. In addition, theKwikLink cable systempasses directly throughthe MaXum blockreducing even morespace typically neededto mount the productson your machinery.Connectivity is also provided for the standard round mediasystems through directconnection or dropcables.

Compact with a low-profile, ArmorBlock MaXum is madeup of two major parts: the base, whichattaches directly to the round or flatmedia cable, and the top with the deviceconnectors, LEDs and markers, whichattaches to the base. It contains digitalI/O circuits, a built-in power supply, anda built-in DeviceNet I/O adapter, andoffers point-level diagnostics to simplifytroubleshooting.

1732D/E Armor WeldBlock The 1732D/E Armor WeldBlock combines I/O circuits, a power supplyand network adapters into a single,sealed IP67 housing. The lightweight,space-saving digital I/O block isdesigned to withstand thedemanding operating environment oftypical weldingapplications. Itsdurable nickel-plated aluminum housing protectsthe electronicsfrom the effects ofweld slag andmagnetic fieldscreated by highcurrents at weldpoints found inclose proximity tothe weld head. In addition, the protective housing is lighter thanother similar I/O products and is ideally suited for end-of-arm roboticapplications.

Armor WeldBlock provides industriallyhardened blocks of digital I/O thatcan be mounted directly on equipment near sensors or actuators.Placing I/O directly on the machinereduces wiring, streamlines troubleshooting with highly visibleLEDs and eliminates the need for anexpensive cabinet or junction box,lowering overall system costs.

Armor WeldBlocks are available withDeviceNet and EtherNet/IP connectivity with 24V DC, 16 points inputs only or 16 point self-configuring I/O.

1732 ArmorBlock I/OThe ArmorBlock I/O family offersyou DeviceNet and PROFIBUS™

connectivity in a low-cost IP67 I/Oline. This product is perfect formaterial handling and semiconduc-tor applications, as well as providing you with a low-endalternative in those machinery appli-cations where diagnostics and localcontrol are not valued.

The sealed-housing digital I/O blocks can mount anywhere on the

machine, close tothe sensors andactuators, eliminating enclosure costsand providingshorter cable runs.

ArmorBlock I/O isavailable in 8- or16-points, as inputonly, output only,or as automaticself-configuringwhere any pointcan be an input or output.

1732DS ArmorBlock Guard I/OThe new DeviceNet ArmorBlock GuardI/O provides all the advantages of traditional distributed I/O for complexsafety systems, plus this On-Machinesafety I/O can further reduce wiring

time and startup costsfor any CommonIndustrial Protocol(CIP) safety controllerapplication.ArmorBlock Guard I/Ois optimized to workwith GuardPLC,GuardLogix, andSmartGuard controllers and safety applications that communicate onDeviceNet. Use the I/O for control and monitoring of safetycircuits and to detectfailures at the I/O andfield level. All productsare certified SIL 3 andCategory 4.

A Guard I/O module contains digitalI/O circuits, a power supply, DeviceNetI/O adapter, and offers point-level diagnostics to simplify troubleshootingof all input and output circuits.

ArmorBlock Guard I/O is compatiblewith quick disconnect standard sensorsand many safety devices. It uses thesame input and output M12 pins asstandard ArmorBlock and ArmorBlockMaxum I/O, meaning the M12 I/Oconnectors are compatible with bulletin 889D, 889N cordsets and 879D 5 pin patchcords and Y-cable.

ArmorBlock I/O

1732D/E Armor WeldBlock

1732DS ArmorBlock Guard I/O

ArmorBlock MaXum I/O


Choose Chassis-based I/O to match your controller or Distributed I/O based on the location, style and functions required for the application.

ConsiderChassis-basedI/O for useremotely to minimize thetypes of sparesfor a project orplant, or when field cable marshalling cabinets arebeneficial.

ConsiderDistributed I/O productsfor useremotely or in a local enclosurewhen a network isrequired and termination features ofDistributedI/O are desirable.

In-Cabinet™ On-Machine™

ArmorBlock MaXum® I/O

CompactBlock Guard I/O

ArmorBlock Guard I/O

Armor WeldBlock

ArmorBlock I/O

ArmorPoint I/O

CompactBlock I/O

CompactBlock LDX I/O

POINT I/O

FLEX I/O

In-Cabinet On-Machine

Block

Modu

lar

Block

Modu

lar

1756 ControlLogix I/O 1769 Compact I/O 1771 Universal I/O

1755 GuardPLC 2000 I/O1746 SLC I/O1762 MicroLogix 1100 and 1200 I/O

I/O Types

Module Density

Speciality Modules

Primary Controller Compatible Controllers

Network Connectivity

Environmental Style

Mounting

Termination Options

Special Features & Diagnostics

Maximum ModulesPer Chassis/Network

Node

Connect to your Allen-Bradley

sensors or other field devices with:

4 EASY STEPS TO CHOOSE I/O

For product certification information refer to our website at www.ab.com/certificationwww.klinkmann.com

6 / 2011

1756 ControlLogix I/O 1769 Compact I/O 1771 Universal I/O 1755 GuardPLC 2000 I/O1746 SLC I/O1762 MicroLogix 1100 and1762 MicroLogix 1200 I/O

Digital, Analog, Thermocouple,RTD, Specialty

4 to 32 Points Per Module

Counter In, Resolver Interface,Serial ASCII, Address ReserveModule, LDT Interface, Weigh Scale, Stepper Module,Strain Gage, Boolean

CompactLogixMicroLogix 1500

DeviceNet

IP20, Class I, Division 2/Zone 2

Panel, DIN Rail, Horizontal

Screw-NEMA, Remote Termination

Short-circuit Protected Out, StatusLEDs, RTB (Removable TerminalBlocks), Keyed Locations

Up to 30 Local Modules

Digital, Analog, Thermocouple,RTD


Counter In, Positioning Module,Hi-Res Frequency Monitor, FlowTotalizer Rate Meter, Serial ASCII,Temperature Control, HydraulicControl, Weigh Scale, Plastics,Resolver Interface, ProgrammableLimit Switches, SerialSynchronous Interface (SSI), LDT Interface, Time Stamp, DieMonitoring, Signature Analysis

PLC-5ControlLogix, SoftLogix 5800

ControlNet, Remote I/O,EtherNet/IP


Panel, Horizontal


Short-circuit Protected Out, OpenWire Detection, Status LEDs, RTB(Removable Terminal Blocks),Keyed Locations

Up to 16 Modules Per Chassis



Counter In, Positioning Module,Serial ASCII, Temperature Control,Hydraulic Control, Weigh Scale,Plastics, Resolver Interface,Programmable Limit Switches,LDT Interface, Die Monitoring,Signature Analysis

SLC 500PLC-5,

Remote I/O, ControlNet,EtherNet/IP


Panel, Horizontal


Short-circuit Protected Out withFeedback, Status LEDs, RTB(Removable Terminal Blocks),Keyed Locations

Up to 13 Modules Per Chassis,Max 3 Chassis, 30 Modules Per CPU/Node



GuardPLC 2000

EtherNet/IP

IP20

Panel, Vertical

Screw-NEMA

Rated for use in SIL 3 andcatagory 4 safety applications(according to IEC 61508 and EN 954 respectively), Discrete(24 Vdc) analog in, analog outand high-speed counter (1 MHz)


Digital, Analog, Thermocouple, RTD


MicroLogix 1100 and 1200(Local Only)

EtherNet/IP, DeviceNet,DH-485

Class I, Division 2

Panel, DIN Rail, Horizontal

Screw-NEMA

Short-circuit Protected Outputs, Status LEDs

Up to 4 Modules Per MicroLogix 1100Up to 6 Modules Per MicroLogix 1200

Bulletin 1667 PanelConnect

Plus

Bulletin 889 Patchcord

Plus

Bulletin 898 Distribution Box

Plus


Bulletin 888 Receptacle

Plus


Plus


Plus

Bulletin 889 Patchcordor Bulletin 879 Y-Cable


Plus


Bulletin 888Receptacle

Plus


OR

Bulletin 889 Cordset

OR OR OR

Digital, Analog, Thermocouple, RTD, Motion


Counter In, Positioning Module, Hi-Res Frequency Monitor, FlowTotalizer Rate Meter, Serial ASCII,Hydraulic Control, Weigh Scale,Resolver Interface, ProgrammableLimit Switches, LDT Interface,Sequence of Events Input

ControlLogixSoftLogix 5800

ControlNet, EtherNet/IP


Panel, Horizontal

Screw, Spring, Remote Termination

RIUP (Removal and Insertion UnderPower), Short-circuit Protected Outw/ & w/out Fdbk., Open Wire & No Load Detect-ion, Status LEDs,RTB (Remov-able Terminal Blocks),Flash Upgradable, RetrievableModule ID, Electronic Keying, Pulse-Tested Outputs, Timestamping


CHASSIS-BASED I/O SPECIFICATIONS


I/O Types

Module Density

Speciality Modules

Network Connectivity

Environmental Style

Mounting

Termination Options

Special Features and Diagnostics

Maximum Modules Per Chassis/Network Node

Connect to your Allen-Bradley®

sensors or other field devices with:

Digital, Analog, Relay,Thermocouple, RTD


HART Analog, Encoder, Counter In, Quadrature Mode, Hi-ResFrequency Monitor, Flow TotalizerRate Meter, SCANport

DeviceNet, ControlNet, EtherNet/IP, PROFIBUS, Remote I/O, Other OpenNetworks

IP20, Class I, Division 2/Zone 2,European Zone 2, MarineCertification

Panel, DIN Rail, Horizontal, Vertical

3-wire/32-point Spring, 2-wireand 3-wire/32-point Screw,Fused, Grounded, D-ShellConnector, Knife Disconnect

RIUP (Removal & Insertion UnderPower), Short-circuit ProtectedOut, Short-circuit Protected Outwith Feedback, Status LEDs,Keyed Locations, Open WireDetection with Feedback, No LoadDetection with Feedback

Up to 8 Modules Per Node



Hi-Res Frequency Monitor, Flow Totalizer Rate MeterHART Analog

ControlNet in hazardous area viacoax or fiber. By use of Bus Isolator: DeviceNet,ControlNet, EtherNet/IP,PROFIBUS

Hazardous Areas, Class I, II & III, Division 1, Zone 1,European ATEX Zone 1 & 22


Spring, Screw

RIUP (Removal & InsertionUnder Power), Short-circuitProtected Out with Feedback,Open Wire Detection withFeedback, No Load Detection,Status LEDs, Keyed Locations,Coax or Fiber Media inHazardous Areas


Digital, AC/DC, Analog, Thermocouple, RTD


Encoder, 1 MHz. Counter In,Counter In with Outputs, SerialRS232, RS485, RS422, Channel Isolated Thermocouple,RTD, Serial Synchronous Interface(SSI), Address Reserve

DeviceNet (including SubNetconnectivity), ControlNet (Logix Controller Only),EtherNet/IP (Logix ControllerOnly), PROFIBUS, OPC/DDE DataMonitoring

Class I, Division 2/Zone 2, Marine Certification,European ATEX Zone 2 3G

DIN Rail, Horizontal, Verticalwith no Thermal Derating

Removable: Spring, Screw, Cold JuunctionCompensation (CJC),12-wire

RIUP (Removal & Insertion UnderPower), Alarming andAnnunciation, Short-circuitProtected Outputs, Open Wire Detection with LEDs and Electronic Feedback, No LoadDetection with Feedback, StatusLEDs, RTB (Removable TerminalBlocks), Electronically KeyedLocations, Flash UpgradableFirmware


Digital, Analog, Relay,Thermocouple, RTD


N/A

DeviceNet, PROFIBUS

IP20


D-Shell Mass Termination, Screw

Status LEDs, Rotary addressswitches

Up to 4 Blocks Per Node

1794 FLEX I/O1734 POINT I/O 1797 FLEX Ex I/O1790D/P CompactBlock LDX I/O

Digital, Analog


N/A

DeviceNet, Remote I/O,PROFIBUS



Removable Terminal Strips, Screw

Short-circuit Protected Out,Status LEDs, RTB (RemovableTerminal Blocks), HardwareWatchdog, DeviceLogix™

Smart Component Technology,Rotary address switches

2 Blocks Per Node

1791D/P/R CompactBlock I/O

Bulletin 888 Receptacle Plus Bulletin 889 PatchcordPlus Bulletin 898 Distribution BoxPlus Bulletin 889 Patchcordor Bulletin 879 Y-Cable


Plus


OR OR

IN-CABINET I/O SPECIFICATIONS


Digital, Analog, AC, DC,Relay, Thermocouple, RTD


30 types, Serial SynchronousInterface (SSI), Very High Speed Counter, RS232, RS485,Incremental Encoder, Extensioncables for I/O and ArmorStart

DeviceNet (including SubNetConnectivity), ControlNet,EtherNet/IP, PROFIBUS

IP69KIP67 (AC)

On-Machine™, Panel,Horizontal, Vertical

8mm, 12mm, 23mm,Quick Disconnect

RIUP (Removal and InsertionUnder Power), Alarming andAnnunciation, Short-CircuitProtected Outputs, Open WireDetection with LEDs and ElectronicFeed back, No Load Detectionwith Feedback, Status LEDs,

Electronically Keyed Locations,Flash Upgradeable Firmware


Digital 24 VDC

8 or 16 Points Per Block

N/A

DeviceNet, PROFIBUSEtherNet/IP

IP69K, NEMA 4X

On-Machine™, Panel,Horizontal, Vertical

8mm, 12mmQuick Disconnect

Self-configuring I/O,Output Monitoring,Electronic OutputProtection

1 Block Per Node

Digital 10-30V DC

2 to 16 Points Per Block

N/A

DeviceNet, Round or Flat Media

IP67, NEMA 4X, 6P

On-Machine™, Panel, Horizontal, Vertical

12mm Quick Disconnect

RIUP (Removal & Insertion UnderPower), Short-circuit ProtectedOut, Open Wire Detection, NoLoad Detection, Status LEDs,Flash Upgradable. DeviceLogix™

Smart Component Technology

1 Block Per Node

Digital 24VDC

8 to 16 points per module

N/A

DeviceNet


Din rail, horizontal, vertical

Screw terminals

RIUP, removable terminal blocks,electronically keyed, flash upgradeable, short circuit protectedoutputs, short circuit detection, open wire detection, muting lampcontrol/monitoring, status LEDs,rotary address switches, additionalconfigurable outputs (pulse test,etc)

1 Block per Node

1791DS CompactBlock Guard I/O

1792D ArmorBlock MaXum I/O1738 ArmorPoint I/O 1732 ArmorBlock I/O

Digital 24 VDC

8 to 16 points per module

N./A

DeviceNet

IP67

Din rail, horizontal, vertical


RIUP, electronically keyed, flashupgradeable, short circuit protected outputs, short circuitdetection, open wire detection,muting lamp control/monitoring,status LEDs, rotary addressswitches, additional configurableoutputs (pulse test, etc)

1 Block Per Node

Digital 24 VDC

16 Points Per Block

N/A

DeviceNet, EtherNet/IP

IP67

On-Machine™, Panel, Horizontal, Vertical


Nickel plated cast aluminumhousing, improved resistance toweld splatters and weld fieldimmunity

1 Block Per Node

1732D/E Armor WeldBlock

1732DSArmorBlock Guard I/O

Bulletin 888 Receptacle

Plus


Bulletin 889 Cordset


Bulletin 879 Y-Cable

* OPC/DDE Data Monitoring does not require a PLC® where used in conjunction with RSLinx™

** IP67 (AC modules)

For additional information on Allen-Bradley® I/O wiring and connection systems, please refer to our Websites at www.ab.com/io and www.ab.com/sensors or to the following publications:

Sensors: (Connection Systems Chapter - Publication C114-CA001A-EN-P)PanelConnect™ Selection Guide: (Publication 1667-SG002C-EN-P)

DeviceNet™ Media: (Publication 1485-CG001A-EN-P)

OR OR

ON-MACHINE I/O SPECIFICATIONS


Consider other speciality I/O modules from our Encompass Partners for a complete solution.

1746 Backplane Connected Specialty I/OAdvanced Micro Controls Inc.Programmable Limit SwitchesSensor Interfaces - Linear Displacement TransducerSensor Interfaces - Resolver

Ametek Automation & Process TechnologiesSensor Interfaces - Linear Displacement TransducerSensor Interfaces - Resolver

Balogh T.A.G. CorporationRadio Frequency Identification

Control Chief CorporationHigh Current Relay ModuleRadio Frequency Control Modules

Electro Cam Corp.Programmable Limit Switches

Escort Memory SystemsRadio Frequency Identification

Hardy InstrumentsWeighing - Instruments

Helm Instrument Co. Inc.Sensor Interfaces - ResolverSensors - Strain GageSignature Analysis

Hiprom (Pty) Ltd.Time Stamp Module

Phoenix Digital CorporationFiber Optic Interfaces

ProSoft Technology, Inc.Network - Protocol SolutionsProcess Instruments - Gas/Oil Measurement

Spectrum Controls Inc.I/O Modules - Analog, Discrete, AC, DC, Isolated, Universal

WoodheadNetwork - PLC® Scanners/Adapters

1756 Backplane Connected Specialty I/OAdvanced Micro Controls Inc.Motion Control - CLX StepperProgrammable Limit SwitchesSensor Interfaces - Resolver

Bihl+Wiedemann GmbHNetwork - PLC® Scanners/Adapters

Digitronic Automationsanlagen GmbHProgrammable Limit Switches


Helm Instrument Company Inc.Sensors - Strain GageSignature Analysis


Octal Systems Inc.Network - Protocol Solutions


ProSoft Technology, Inc.Information ProcessingNetwork - Protocol SolutionsProcess Instruments - Gas/Oil Measurement

Spectrum Controls Inc.I/O Modules - Universal Analog, +HARTI/O Modules - Counter/Flowmeter

WoodheadNetwork - PLC Scanners/Adapters

1769 Backplane Connected Specialty I/OAdvanced Micro Controls Inc.Motion Control - Compact/MicroLogix™ StepperSensor Interfaces - Linear Displacement Transducer

Bihl+Wiedemann GmbHNetwork - PLC® Scanner/Adapters


Helm Instrument Co. Inc.Sensor Interfaces - ResolverSensors - Strain GageWeighing - Instruments

HilscherNetwork - PLC® Scanners/Adapters


ProSoft Technology, Inc.Network - Protocol Solutions

Spectrum Controls Inc.I/O Modules - Analog, Discrete


1771 Backplane Connected Specialty I/OAdvanced Micro Controls Inc.Programmable Limit Switches Sensor Interfaces -

Linear Displacement TransducerSensor Interfaces - Resolver

Ametek Automation & Process TechnologiesProgrammable Limit Switches




ProSoft Technology, Inc.Network - Protocol SolutionsProcess Instruments - Gas/Oil Measurement

Spectrum Controls Inc.I/O Modules - High Density Analog, Isolated AC, AC/DC

Weed Instrument Co.Fiber Optic Interfaces


1794 FlexLogix Connected Speciality I/OHilscherNetwork - PLC® Scanner/Adapter

Distributed I/OAdvanced Micro Controls Inc.POINT™ I/O - Stepper ControlMotion Control - Speciality Module

Burkert Fluid Control Systems1734 Valve Interfaces - Pneumatic

Technology, Inc.FLEX™ (1794) - Protocol Solutions

For more information about the Encompass Program and theEncompass Referenced Products go to our Website www.rockwellautomation.com/encompass.

All trademarks and registered trademarks are property of their respective companies.

SPECIALITY MODULES FROM ENCOMPASS PARTNERS

Yekaterinburgtel. +7 343 376 [email protected]

St. Petersburgtel. +7 812 327 [email protected]

Moscowtel. +7 495 641 [email protected]

Кievtel. +38 044 495 33 [email protected]

Helsinkitel. +358 9 540 [email protected]

Vilniustel. +370 5 215 [email protected]

Rigatel. +371 6738 [email protected]

Мinsktel. +375 17 200 [email protected]

Tallinntel. +372 668 [email protected]

Samaratel. +7 846 273 95 [email protected]

www.klinkmann.com

Rockwell_IO_Allen-Bradley_IO_Products_Brochure_en_0611.pdf

CONNECTING WITH CONFIDENCEmedia.klinkmann.fi › catalogue › en › Rockwell ›...

Documents

Transcript of CONNECTING WITH CONFIDENCEmedia.klinkmann.fi › catalogue › en › Rockwell ›...