Connect your turbinesUpgrade your analogue modem for enhanced control with VestasOnline™ EnterpriseMarket requirements dictate enhanced control, and as analogue hardware becomes increasingly costly and difficult to replace, an IP upgrade connecting your turbines will secure higher performance through advanced monitoring, reporting and control systems - features which turbines with analogue modem traditionally have not been able to take advantage of.

The ability to monitor and manage your turbine is essential to operating it most efficiently from a technical and financial point of view, and upgrading turbine connec-tions enables utilisation of VestasOnline™ Enterprise, our new data architecture and platform for our SCADA solutions.

IP communication kit for fast and permanent connectionAn upgrade from modem to DSL router enables fast and permanent connection to the turbine. The communication kit enables IP connection and thereby access to our user friendly web-based asset management tool, allowing for monitoring and controlling of all turbines*.

Asset management across the portfolioVestasOnline™ Enterprise allows you to view and manage your wind parks through a remotely accessed web interface. With VestasOnline™ Enterprise you can control your entire portfolio and monitor key components on single turbine level and your data is automatically backed up, which means it will always be secure and constantly up to date.

* Additional hardware such as VestasOnline™ Gateway might be required, based on local site and turbine conditions.

Vestas Wind Systems A/S

Hedeager 44 . 8200 Aarhus N . Denmark

Tel.: +45 9730 0000 . Fax: +45 9730 0001

vestas@vestas.com . vestas.com

IP communication package:· Hardware upgrade (router and controller modifications)· Setup and configuration (onsite and remote)· VestasOnline™ Enterprise web application· Optional: VestasOnline™ Gateway (site specific requirements)

Not included: monthly internet fee and other 3rd party expenses

Pricing based on number of turbines and site setup

© 2015 Vestas Wind Systems A/S. All rights reserved.This document was created by Vestas Wind Systems A/S on behalf of the Vestas Group and contains copyrighted material, trademarks and other proprietary information. This document or parts

thereof may not be reproduced, altered or copied in any form or by any means without the prior written permission of Vestas Wind Systems A/S. All specifications are for information only and are

subject to change without notice. Vestas Wind Systems A/S does not make any representations or extend any warranties, expressed or implied, as to the adequacy or accuracy of this information.

This document may exist in multiple language versions. In case of inconsistencies between language versions the English version shall prevail. Certain technical options, services and wind turbine

models may not be available in all locations/countries. 02

/20

15

-EN

Key features· SCADA functionalities via web application· 24/7 remote access for monitoring and control· Portfolio performance· Site performance· Individual turbine performance· Start-stop control for individual turbines (based on user rights)· Historical data for reporting and optimisation

CompatibilityCommunication kit and VestasOnline™ Enterprise is compatible with most of the Vestas turbines from V39-V126 as well as the NM600-NM2000. In general it supports the following controller types:· VMP 3500· VMP 4400· VMP 5000.1-5000.2· VMP 6000· VMP Global- TAC I – II

Note: Connection and network depends on site internet infrastructure (mobile, satcom or terrestrial)

Key components for monitoring via VestasOnline™ Enterprise*· Generator · Gearbox · Rotor & Rotor Inverter · Stator Coil · Pitch System· Hydraulics· Controller· Grid

* Dependent on turbine and controller type. Contact your local Vestas Services™ representative for verification.

Internet connection

End User

Vestas technicians

Vestas Surveillance

Centre

Vestas Server

VestasOnline® Enterprise

Optional