Quick HOWTO _ Ch18 _ Configuring DNS - Linux Home Networking
Configuring vnc server in linux
-
Upload
mohammed-yazdani -
Category
Technology
-
view
182 -
download
1
Transcript of Configuring vnc server in linux
Overview of Unix Activity Guide 13
[Edition 1][Last Update 130815]
For any issues/help contact : [email protected]
If there is any issue at setup or connection contact [email protected]
Configuring VNC ServerStep1: Install the VNC Server
Step2: Edit the "/etc/sysconfig/vncservers" file to configure the required displays. The following entries enable VNC for display numbers ":2" and ":3". Notice multiple "display:user" pairs
are defined on a single line, but the arguments for each display are defined separately.
If there is any issue at setup or connection contact [email protected]
Set the VNC password for any users defined in the "/etc/sysconfig/vncservers" file.
Enable the "vncserver" service for autostart and start the service.
If there is any issue at setup or connection contact [email protected]
Use the following commands to stop the service and disable autostart.
# service vncserver stop# chkconfig vncserver off
install vnc viewer on Windows (client-pc) and connect
If there is any issue at setup or connection contact [email protected]
=============End of the Activity 13 Guide========
If there is any issue at setup or connection contact [email protected]