Configuration Item .
-
Upload
shanon-caldwell -
Category
Documents
-
view
217 -
download
0
Transcript of Configuration Item .
• Configuration Item
https://store.theartofservice.com/the-configuration-item-toolkit.html
Google+ - Circles
1 For the unsegmented Stream (includes content from all of a user's Circles), each
Circle has a "slider" configuration item with four positions: nothing, some things, most
things, and everything
https://store.theartofservice.com/the-configuration-item-toolkit.html
Information Technology Infrastructure Library - Change management
1 A change is an event that results in a new status of one or more configuration items
(CIs), and which is approved by management, cost-effective, enhances business process
changes (fixes) – all with a minimum risk to IT infrastructure.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Information Technology Infrastructure Library - Service asset and configuration management
1 Service asset and configuration management is primarily focused on maintaining
information (i.e., configurations) about Configuration Items (i.e., assets) required to
deliver an IT service, including their relationships.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Information Technology Infrastructure Library - Incident management
1 2007: An unplanned interruption to an IT service or a reduction in the quality of an IT service. Failure of a configuration item that
has not yet impacted service is also an incident. For example, failure of one disk from
a mirror set.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Software configuration management - Purposes
1 Configuration identification - Identifying configurations, configuration items and baselines.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Dual Vee Model - Vee Model
1 Lowest Configuration Item)
https://store.theartofservice.com/the-configuration-item-toolkit.html
Dual Vee Model - The Entity Vee Model
1 An Entity Vee (figure - below) exists for every entity of the architecture from the system,
down to the lowest configuration items (LCIs), such as computer software units or hardware
components
https://store.theartofservice.com/the-configuration-item-toolkit.html
Dual Vee Model - Phasing of decision gates
1 For simplicity of illustration, only one Entity Vee is shown intersecting the Architecture Vee at each decomposition level. Note that
the design-to sequence is top down, starting at the system level and proceeding consistent
with decomposition to the lowest configuration item level (LCI). This sequence
ensures that there is proper top down requirements flowdown and traceability.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Overview
1 The CM process for both hardware and software configuration items comprises five distinct disciplines as established in the MIL–
HDBK–61A and ANSI/EIA-649.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Overview
1 CI incrementally establishes and maintains the definitive current basis for Configuration
Status Accounting (CSA) of a system and its configuration items (CIs) throughout their
lifecycle (development, production, deployment, and operational support) until
disposal.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Overview
1 Configuration Status Accounting: Includes the process of recording and reporting
configuration item descriptions (e.g., hardware, software, firmware, etc.) and all departures from the baseline during design
and production.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Software
1 *Configuration identification is the process of identifying the attributes that define every aspect of a configuration item. A configuration item is a product (hardware and/or software) that has an end-user purpose. These attributes are recorded in configuration documentation and baselined.
Baseline (configuration management)|Baselining an attribute forces formal configuration change
control processes to be effected in the event that these attributes are changed.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Software
1 *Configuration change control is a set of processes and approval stages required to
change a configuration item's attributes and to re-baseline them.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Software
1 *Configuration status accounting is the ability to record and report on the configuration
baselines associated with each configuration item at any moment of time.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Software
1 *Configuration audits are broken into functional and physical configuration audits. They occur
either at delivery or at the moment of effecting the change. A functional configuration audit
ensures that functional and performance attributes of a configuration item are achieved,
while a physical configuration audit ensures that a configuration item is installed in accordance with the requirements of its detailed design
documentation.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Vyatta - Release History
1 6.1 August 2010 Historical LarkspurKenwood 2.6.32 DHCPv6, stateful firewall
failover, LLDP, configuration items (de)activating and commenting, OpenVPN
bridging, IPv6 BGP.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Quality function deployment - House of Quality
1 In addition, the same technique can extend the method into the constituent product
subsystems, configuration items, assemblies, and parts. From these detail level
components, fabrication and assembly process QFD charts can be developed to
support statistical process control techniques.
https://store.theartofservice.com/the-configuration-item-toolkit.html
ITIL security management - Implementation
1 ImplementClassifying and managing of IT applications Process of formally grouping configuration items by type, e.g., software, hardware, documentation, environment,
application.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Incident management - Incident management process, as defined by ITIL
1 Failure of a Configuration Item that has not yet impacted Service is also an Incident
https://store.theartofservice.com/the-configuration-item-toolkit.html
Change management (ITSM) - Information Technology Infrastructure Library
1 Change Management is a process used for managing the planned deployment of
alterations to all configuration items in the configuration management database, (or CIs in the CMDB) that are a part of a business's
live (production) and test (UAT) environments along with any other environment that a
business wants to have under Change Management - generally all environments that
are under the control of 'ICT Operations')
https://store.theartofservice.com/the-configuration-item-toolkit.html
Change management (ITSM) - Information Technology Infrastructure Library
1 * results in a new status of one or more configuration items (CIs)
https://store.theartofservice.com/the-configuration-item-toolkit.html
ITIL - Change management
1 Change management aims to ensure that standardised methods and procedures are used for efficient handling of all changes. A
change is an event that results in a new status of one or more configuration items (CIs), and which is approved by management, is cost-
effective, enhances business process changes (fixes) – all with a minimum risk to IT
infrastructure.
https://store.theartofservice.com/the-configuration-item-toolkit.html
ITIL - Incident management
1 :2007: An unplanned interruption to an IT service or a reduction in the quality of an IT service. Failure of a configuration item that
has not yet impacted service is also an incident. For example, failure of one disk from
a mirror set.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Incident management (ITSM) - Definition
1 :An unplanned interruption to an IT Service or a reduction in the Quality of an IT Service.
Failure of a Configuration Item that has not yet impacted Service is also an Incident. For example, Failure of one disk from a mirror set.. The stated ITIL objective is to restore
normal operations as quickly as possible with the least possible impact on either the
business or the user, at a cost-effective price.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Business Service Management - BSM Technology Tools
1 BSM allows IT departments to operate by service rather than by individual configuration
items or technology silo, enabling prioritization of efforts, ultimately improving
the service that is delivered to the business or organization.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management database
1 Its contents is intended to hold a collection of IT assets that are commonly referred to as
Configuration Items (CIs), as well as descriptive relationships between such assets
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management database
1 The CMDB records configuration items (CI) and details about the important attributes and
relationships between CIs. Configuration managers usually describe CIs using three
configurable attributes:
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item
1 The term 'configuration item' or 'CI' refers to the fundamental structural unit of a
configuration management system
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 The term configuration item can be applied to anything designated for the application of the elements of configuration management and treated as a single entity in the configuration
management system.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 *The entity must be uniquely identified so that it can be distinguished from all other
configuration items.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 *From the perspective of the implementer of a change request|change, the CI is the what of the change. Altering a specific baseline
(configuration management)|baseline version of a configuration item creates a new version
of the same configuration item, itself a baseline. In examining the effect of a change, two of the questions that must be asked are:
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 :# What configuration items are affected?
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 :# How have the configuration items been affected?
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 A Software release|release (itself a versioned entity) may consist of several configuration
items. The set of changes to each configuration item will appear in the release notes, and the notes may contain specific headings for each
configuration item. A complex hardware configuration item may have many levels of
configuration items beneath its top level; each configuration item level must meet the same fundamental elements of the configuration
management system.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 It should be defined at a level such that an individual involved with product marketing
and an individual at the coalface of implementation can agree to a common
definition when they use the name of the lection and identification of configuration
items for a particular project can be seen as the first step in developing an overall
architecture#See_also|architecture of the product from the top down.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration item - Role in configuration management
1 Configuration items, their versions, and their changes form the basis of any configuration audit.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Definitive Media Library
1 The Definitive Media Library provides the storage area for software objects ready for
deployment and should only contain master copies of controlled software media
Configuration item|Configuration Items (CIs) that have passed appropriate quality
assurance checks, typically including both procured and bespoke application and gold
build source code and executables
https://store.theartofservice.com/the-configuration-item-toolkit.html
Event Management (ITIL)
1 An 'event' can be defined as any detectable or discernible occurrence that has significance for the management of the IT Infrastructure
or the delivery of IT service and evaluation of the impact a deviation might cause to the services. Events are typically notifications
created by an IT service, Configuration item|Configuration Item (CI) or monitoring tool.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Event Management (ITIL) - Purpose/Scope
1 * Event Management can be applied to any aspects of Service management|Service
Management that can be controlled and can be automated (Configuration Items)
https://store.theartofservice.com/the-configuration-item-toolkit.html
Event Management (ITIL) - Event Notification and Detection
1 Event notifications can be proprietary, only certain management tools can be used to detect events. Most of the Configuration
item|Configuration Items (CIs) generate event notifications using SNMP open protocol
(Simple Network Management Protocol).
https://store.theartofservice.com/the-configuration-item-toolkit.html
Definitive software library
1 A 'definitive software library' ('DSL') is a secure location, consisting of physical media or a
software repository located on a network file server, in which the definitive authorized
versions of all software configuration items (CIs) are stored and protected
https://store.theartofservice.com/the-configuration-item-toolkit.html
Structure chart - Overview
1 An accurate and complete structure chart is the key to the determination of the
configuration items, and a visual representation of the configuration system
and the internal interfaces among its CIs(define CI clearly)
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Overview
1 The CM process for both hardware and software configuration items comprises five distinct
disciplines as established in the [ http://www.product-lifecycle-
management.com/download/MIL-HDBK-61B%20(Draft).pdf MIL–HDBK–61A] and [
http://webstore.ansi.org/RecordDetail.aspx?sku=ANSI%2FEIA-649-A+2004 ANSI/EIA-649].
These disciplines are carried out as policies and procedures for establishing baselines and
performing a standard change management process.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Overview
1 CI incrementally establishes and maintains the definitive current basis for Configuration
Status Accounting (CSA) of a system and its configuration items (CIs) throughout their
lifecycle (development, production, deployment, and operational support) until
disposal.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Overview
1 * Configuration Status Accounting: Includes the process of recording and reporting
configuration item descriptions (e.g., hardware, software, firmware, etc.) and all departures from the baseline during design
and production. In case of suspected problems, the verification of baseline
configuration and approved modifications can be quickly determined.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration management - Configuration management database
1 CMDBs are used to track Configuration Items (CIs) and the dependencies between them,
where CIs represent the things in an enterprise that are worth tracking and managing, such as but not limited to
computers, software, software licenses, racks, network devices, storage, and even the
components within such items.
https://store.theartofservice.com/the-configuration-item-toolkit.html
IBM Rational ClearCase - Views
1 This was a departure from the repository / sandbox model, allowing for the early
management of artifacts (before they are checked in, and not limited to these first order
configuration items).
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration Management (ITSM)
1 Configuration Management (CM) is an 'Information Technology Infrastructure
Library' (ITIL) version 2 and an IT Service Management (ITSM) 'process' that tracks all of
the individual Configuration Items (CI) in an information system|IT system which may be
as simple as a single server (computing)|server, or as complex as the entire IT
department
https://store.theartofservice.com/the-configuration-item-toolkit.html
Configuration Management (ITSM) - Configuration item
1 A Configuration item (CI) is an IT asset or a combination of IT assets that may depend on
and/or have relationships with other IT processes. A CI will have attributes which may be hierarchical and relationships that will be assigned by the configuration manager in the
CM database.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Juju (software) - Juju's Stengths and Weaknesses
1 By creating a relationship between for instance MySQL and Wordpress, MySQL will
share with Wordpress any IPs, user, password and other configuration items
https://store.theartofservice.com/the-configuration-item-toolkit.html
Baseline (configuration management)
1 In a similar manner, associating multiple configuration items with such a baseline indicates those items as being approved.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Baseline (configuration management) - Baselining Configuration Items
1 In the process of performing configuration management, configuration items (or work
products) may be assigned a baseline so as to establish them with a certain status
https://store.theartofservice.com/the-configuration-item-toolkit.html
Physical configuration audit
1 configuration item against its technical documentation to establish or verify the
configuration item's product baseline.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Physical configuration audit
1 The PCA is used to examine the actual configuration of the Configuration Item (CI)
that is representative of the product configuration in order to verify that the
related design documentation matches the design of the deliverable CI
https://store.theartofservice.com/the-configuration-item-toolkit.html
Google Plus - Circles
1 For the unsegmented Stream (includes content from all of a user's Circles), each
Circle has a slider configuration item with four positions: nothing, some things, most things,
and everything
https://store.theartofservice.com/the-configuration-item-toolkit.html
Process area (CMMI) - Configuration Management (CM)
1 ** SP 1.1 Identify Configuration Items
https://store.theartofservice.com/the-configuration-item-toolkit.html
Process area (CMMI) - Configuration Management (CM)
1 ** SP 2.2 Control Configuration Items
https://store.theartofservice.com/the-configuration-item-toolkit.html
Component repository management - Overview
1 The CM process for both hardware and software configuration items comprises five distinct disciplines as established in the [http://www.product-lifecycle-
management.com/download/MIL-HDBK-61B%20(Draft).pdf MIL–HDBK–61A] and
[http://webstore.ansi.org/RecordDetail.aspx?sku=ANSI%2FEIA-649-A+2004 ANSI/EIA-649]. These
disciplines are carried out as policies and procedures for establishing baselines and performing a standard
change management process.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Component repository management - Overview
1 * Configuration Status Accounting: Includes the process of recording and reporting configuration item descriptions (e.g.,
hardware, software, firmware, etc.) and all departures from the baseline during design
and production. In case of suspected problems, the verification of baseline
configuration and approved modifications can be quickly determined.
https://store.theartofservice.com/the-configuration-item-toolkit.html
Component repository management - Configuration management database
1 CMDBs are used to track Configuration Items (CIs) and the dependencies between them,
where CIs represent the things in an enterprise that are worth tracking and managing, such as but not limited to
computers, software, software licenses, racks, network devices, storage, and even the
components within such items.
https://store.theartofservice.com/the-configuration-item-toolkit.html
For More Information, Visit:
• https://store.theartofservice.com/the-configuration-item-toolkit.html
The Art of Servicehttps://store.theartofservice.com