Configuration Guide For Use with Extreme Summit x440 ...

960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com - 1 -

ConfigurationGuideForUsewithExtremeSummitx440Series

Switches(ForShoreTelPremise14.2)

Version 1.0

October 19, 2015

Innovation Network App Note

IN: 15064

Date: October, 2015

Product: ShoreTel | EXTREME x440 Summit Series Switches System version: ShoreTel 14.2 (IN‐15064)


ShoreTel tests and validates the interoperability of the Member's solution with ShoreTel's published software interfaces. ShoreTel does not test, nor vouch for the Member's development and/or quality assurance process, nor the overall feature functionality of the Member's solution(s). ShoreTel does not test the Member's solution under load or assess the scalability of the Member's solution. It is the responsibility of the Member to ensure their solution is current with ShoreTel's published interfaces. The ShoreTel Technical Support organization will provide Customers with support of ShoreTel's published software interfaces. This does not imply any support for the Member's solution directly. Customers or reseller partners will need to work directly with the Member to obtain support for their solution.

TableofContentsOverview ..................................................................................................................................................... 3 Supported Phone Types ............................................................................................................................... 3 EXTREME Networking Overview and Contact ............................................................................................... 3 EXTREME Product Information ...................................................................................................................... 4

EXTREME Summit Series ........................................................................................................................................... 4 Architecture Overview ................................................................................................................................. 6

Figure 1: ShoreTel Premise Network ................................................................................................................................. 6 Requirements, Certification and Limitations .................................................................................................. 6 Version Support ........................................................................................................................................... 6 Certification Testing Results Summary ........................................................................................................... 7

Table 1: Test Cases for EXTREME Summit x440 Series Switches ............................................................................................. 7 Table 2: Test Cases for ShoreTel ...................................................................................................................................... 7

Configuration Overview ............................................................................................................................... 8 ShoreTel Configuration ................................................................................................................................. 8

Figure 3: Call Control - Options ........................................................................................................................................ 8 EXTREME Configuration ............................................................................................................................... 9

Sample Configuration ................................................................................................................................................ 9 EXTREME Networking Technical Support ..................................................................................................... 20 Document and Software Copyrights ............................................................................................................. 20 Trademarks ................................................................................................................................................ 20 Disclaimer .................................................................................................................................................. 20 Company Information .................................................................................................................................. 20


Overview

This application note describes the steps required to configure Extreme Summit 440 series switches to

support ShoreTel's Unified Communications solution for both Premise ShoreTel 14.2 as well as ShoreTel Sky.

This App Note assumes basic routing and connectivity to the core is already completed. Only basic steps for switch

configuration will be provided.

Supported Phone Types

All ShoreTel IP phones supported on ShoreTel Premise 14.2 will be supported with EXTREME Switches.

EXTREME Networking Overview and Contact Extreme Networks, Inc. (NASDAQ: EXTR) is setting a new standard for superior customer experience by delivering network‐powered innovation and market leading service and support. The company delivers high‐performance switching and routing products for data center and core‐to‐edge networks, wired/wireless LAN access, and unified network management and control. Our award‐winning solutions include software‐defined networking (SDN), cloud and high‐density Wi‐Fi, BYOD and enterprise mobility, identity access management and security. Extreme Networks is headquartered in San Jose, CA and has more than 12,000 customers in over 80 countries. For more information, visit the company's website at http://www.extremenetworks.com.

For post sales support its: http://www.extremenetworks.com/support

The sales contact for US is: 1.888.257.3000


EXTREME Product Information

EXTREME Summit Series The Summit X440 series extends the benefits of the ExtremeXOS operating system to the intelligent, affordable access edge. Running the same operating system as our flagship BlackDiamond X8 and other Summit switches, the Summit X440 series switches provide redundant power supplies, SummitStack™ capability, comprehensive security and high‐performance routing and switching in a cost‐effective, small access switch.

SwitchFeatures

The Summit X440 Series extends the intelligence, insight and control of Extreme Networks XOS to the access edge in a compact, cost‐effective series of stackable switches. ExtremeXOS Operating System – robust, modular operating system helps ensure uptime with process

isolation, monitoring, and automatic restart QoS – advanced traffic management helps ensure quality of experience for converged applications AVB – enables realtime HD/time‐sensitive audio/video streams over Ethernet with assigned QoS PoE/PoE+ – connect and power Wi‐Fi access points, cameras, and IP phones Comprehensive Security – identity‐aware security allows fine‐grained insight and control SummitStack™ – reduces management overhead by combining multiple switches into a single logical unit Redundant Power – available redundant power supply contributes to better reliability


SwitchBenefits

High Performance

High bandwidth, non‐blocking architecture

Quality of Service (QoS) with advanced traffic management capabilities

Automatic provisioning via Universal Port capability

Comprehensive network management functionality

8, 24, or 48‐port Gigabit Ethernet (GbE) connectivity in a 1RU form factor

SummitStack 40Gbps

10 Gigabit Ethernet (10GbE) uplinks

Energy Efficient Ethernet (EE) IEEE802.3az Comprehensive Security Features

Identity‐aware policy and host integrity enforcement

Extensive MAC and IP security functionality to help prevent man‐in‐the‐middle attacks

Universal Port dynamic security profile to provide fine granular security policy in the network

Multiple network edge authentication support with multiple end‐points per port Software Defined Networking (SDN)

ExtremeXOS implementations of OpenFlow APIs allow an external OpenFlow‐based SDN controller to access and control the forwarding plane of ExtremeXOS network devices.

ExtremeXOS‐based switches offer a programming interface through OpenFlow to enable a high degree of automation in provisioning network services for many upper layer business‐critical applications running the OpenFlow‐based SDN controller.

ExtremeXOS‐based switches also allow for integration with the OpenStack open source cloud computing platform for public and private clouds through the Extreme Networks Quantum plugin.

EXTREMESwitchSupportedModels

Model Number Description

EXTREME x440 summit Series

http://learn.extremenetworks.com/rs/extreme/images/Summit‐X440x‐DS.pdf

For more information, please visit EXTREME Summit x440 Series Switch


Architecture Overview

ShoreTel Premise Network

Figure 1: ShoreTel Premise Network

Requirements, Certification and Limitations

Only EXTREME x440 Summit series Switches with PoE feature are supported.

802.1x functionality between ShoreTel and EXTREME Switches is not currently certified.

ST Connect and support for MGCP phones will be added later.

Version Support

EXTREME x440

Summit Switches

ShoreTel

Release

ShoreTel 14.2 (Premise) 19.45.8701.0


Certification Testing Results Summary

Table 1: Test Cases for EXTREME Summit x440 Series Switches

ID Name Description Results

1.1 Switch PoE Switch’s PoE ports will successfully bring up the ShoreTel IP phones. Power used by Phone while on or off hook is less than Allocation power

PASS

1.2 DHCP Dynamic configuration for IP phones

The ShoreTel IP phones are dynamically configured by the DHCP server. IP address and Voice VLAN ID are assigned by the DHCP server and successfully registered with ShoreTel Communicationmanager.

PASS

1.3 Static configuration for IP phones

The ShoreTel IP phones are also statically configured with IP addresses and Voice VLAN IDs and registered with ShoreTel Communication manager successfully.

PASS


1.4 Sending data traffic and voice traffic on the same switch port

The PCs are connected behind the ShoreTel IP phone (in both the static and DHCP dynamically configured case). The PCs are successfully assigned an IP address and data VLAN ID. Sending data traffic from the PCs does not interrupt the ongoing phone call.

PASS

1.5 QoS The QoS function is clarified according to DSCP set on the ShoreTel IP phones. The EXTREME switch successfully classifies the voice traffic and queueing/schedule accordingly.

PASS

Table 2: Test Cases for ShoreTel


2.1 Place call Verify successful call placement with normal dialing to a variety of terminating phones.

PASS

2.2 Call waiting Verify appropriate notification and successful connection of incoming call while busywith another party.

PASS

2.5 Transfer – blind Verify successful blind transfer of connected call. PASS

2.6 Transfer – monitored Verify successful monitored transfer of connected call. PASS


Configuration Overview

The following sections document the major steps needed to configure the ShoreTel system with the EXTREME

x440 summit series switches.

ShoreTel Configuration

There is no specific configuration required on the ShoreTel telephony system to interoperate with the EXTREME

Ethernet switches, although you may need to configure the ShoreTel system for proper QoS functionality.

ShoreTel Director allows you to configure DiffServ or ToS Byte settings in the Call Control Options page (see below

for example). Please note that ShoreTel Director requires the settings in decimal, thus a DiffServ setting of 46

corresponds to a setting of 184.

For Call Control Quality of Service, although legacy value of 104 is still supported but we highly recommend to

modify this value to 96 which corresponds to DiffServ setting of 24. Configuring this parameter with the actual

DiffServ or ToS Byte setting will result in undesired results. For further assistance in configuring the DiffServ/ToS

Byte parameter, please refer to ShoreTel’s Administration Guide or contact ShoreTel Network Services.

Figure 3: Call Control ‐ Options


EXTREME Configuration This following section describes basic configuration procedures for the EXTREME Summit x440 Series Switches.

Sample Configuration This Application note assumes basic routing configuration has been completed. The following sample switch

configuration should be used only for reference and actual configuration for customer may vary.

# # Module devmgr configuration. # configure snmp sysContact "[email protected], +1 888 257 3000" configure sys‐recovery‐level switch reset # # Module vlan configuration. # configure vlan default delete ports all configure vr VR‐Default delete ports 1‐24 configure vr VR‐Default add ports 1‐24 configure vlan default delete ports 1‐23 create qosprofile "QP4" create qosprofile "QP6" create vlan "data" configure vlan data tag 2 create vlan "voice" configure vlan voice tag 3 enable diffserv examination port 1 disable dot1p examination port 1 enable diffserv examination port 2 disable dot1p examination port 2 enable diffserv examination port 3 disable dot1p examination port 3 enable diffserv examination port 4 disable dot1p examination port 4 enable diffserv examination port 5 disable dot1p examination port 5 enable diffserv examination port 6 disable dot1p examination port 6 enable diffserv examination port 7 disable dot1p examination port 7 enable diffserv examination port 8 disable dot1p examination port 8 enable diffserv examination port 9 disable dot1p examination port 9 enable diffserv examination port 10 disable dot1p examination port 10 enable diffserv examination port 11 disable dot1p examination port 11 enable diffserv examination port 12 disable dot1p examination port 12 enable diffserv examination port 13 disable dot1p examination port 13


enable diffserv examination port 14disable dot1p examination port 14 enable diffserv examination port 15 disable dot1p examination port 15 enable diffserv examination port 16 disable dot1p examination port 16 enable diffserv examination port 17 disable dot1p examination port 17 enable diffserv examination port 18 disable dot1p examination port 18 enable diffserv examination port 19 disable dot1p examination port 19 enable diffserv examination port 20 disable dot1p examination port 20 enable diffserv examination port 21 disable dot1p examination port 21 enable diffserv examination port 22 disable dot1p examination port 22 enable diffserv examination port 23 disable dot1p examination port 23 enable diffserv examination port 24 disable dot1p examination port 24 configure mirror DefaultMirror to port 23 configure vlan data add ports 1‐22 untagged configure vlan Default add ports 24 untagged configure vlan voice add ports 1‐22 tagged configure vlan Default ipaddress 10.40.12.3 255.255.255.0 enable ipforwarding vlan Default configure vlan data ipaddress 10.140.8.1 255.255.255.0 enable ipforwarding vlan data configure vlan voice ipaddress 10.140.9.1 255.255.255.0 enable ipforwarding vlan voice configure qosprofile QP4 maxbuffer 100 weight 1 configure qosprofile QP6 maxbuffer 100 weight 1 configure qosprofile QP4 minbw 0 maxbw 100 ports 1 configure qosprofile QP6 minbw 0 maxbw 100 ports 1 configure qosprofile QP4 minbw 0 maxbw 100 ports 2 configure qosprofile QP6 minbw 0 maxbw 100 ports 2 configure qosprofile QP4 minbw 0 maxbw 100 ports 3 configure qosprofile QP6 minbw 0 maxbw 100 ports 3 configure qosprofile QP4 minbw 0 maxbw 100 ports 4 configure qosprofile QP6 minbw 0 maxbw 100 ports 4 configure qosprofile QP4 minbw 0 maxbw 100 ports 5 configure qosprofile QP6 minbw 0 maxbw 100 ports 5 configure qosprofile QP4 minbw 0 maxbw 100 ports 6 configure qosprofile QP6 minbw 0 maxbw 100 ports 6 configure qosprofile QP4 minbw 0 maxbw 100 ports 7 configure qosprofile QP6 minbw 0 maxbw 100 ports 7 configure qosprofile QP4 minbw 0 maxbw 100 ports 8 configure qosprofile QP6 minbw 0 maxbw 100 ports 8 configure qosprofile QP4 minbw 0 maxbw 100 ports 9 configure qosprofile QP6 minbw 0 maxbw 100 ports 9 configure qosprofile QP4 minbw 0 maxbw 100 ports 10


configure qosprofile QP6 minbw 0 maxbw 100 ports 10configure qosprofile QP4 minbw 0 maxbw 100 ports 11 configure qosprofile QP6 minbw 0 maxbw 100 ports 11 configure qosprofile QP4 minbw 0 maxbw 100 ports 12 configure qosprofile QP6 minbw 0 maxbw 100 ports 12 configure qosprofile QP4 minbw 0 maxbw 100 ports 13 configure qosprofile QP6 minbw 0 maxbw 100 ports 13 configure qosprofile QP4 minbw 0 maxbw 100 ports 14 configure qosprofile QP6 minbw 0 maxbw 100 ports 14 configure qosprofile QP4 minbw 0 maxbw 100 ports 15 configure qosprofile QP6 minbw 0 maxbw 100 ports 15 configure qosprofile QP4 minbw 0 maxbw 100 ports 16 configure qosprofile QP6 minbw 0 maxbw 100 ports 16 configure qosprofile QP4 minbw 0 maxbw 100 ports 17 configure qosprofile QP6 minbw 0 maxbw 100 ports 17 configure qosprofile QP4 minbw 0 maxbw 100 ports 18 configure qosprofile QP6 minbw 0 maxbw 100 ports 18 configure qosprofile QP4 minbw 0 maxbw 100 ports 19 configure qosprofile QP6 minbw 0 maxbw 100 ports 19 configure qosprofile QP4 minbw 0 maxbw 100 ports 20 configure qosprofile QP6 minbw 0 maxbw 100 ports 20 configure qosprofile QP4 minbw 0 maxbw 100 ports 21 configure qosprofile QP6 minbw 0 maxbw 100 ports 21 configure qosprofile QP4 minbw 0 maxbw 100 ports 22 configure qosprofile QP6 minbw 0 maxbw 100 ports 22 configure qosprofile QP4 minbw 0 maxbw 100 ports 23 configure qosprofile QP6 minbw 0 maxbw 100 ports 23 configure qosprofile QP4 minbw 0 maxbw 100 ports 24 configure qosprofile QP6 minbw 0 maxbw 100 ports 24 configure diffserv examination code‐point 24 qosprofile QP4 configure diffserv examination code‐point 46 qosprofile QP6 configure mirror DefaultMirror add port 7 ingress‐and‐egress configure mirror DefaultMirror add port 11 ingress‐and‐egress # # Module fdb configuration. # # # Module rtmgr configuration. # configure iproute add default 10.40.12.1 # # Module mcmgr configuration. # # # Module aaa configuration. # # # Module acl configuration.


# # # Module bfd configuration. # # # Module ces configuration. # # # Module cfgmgr configuration. # # # Module dosprotect configuration. # # # Module dot1ag configuration. # # # Module eaps configuration. # # # Module edp configuration. # # # Module elrp configuration. # # # Module ems configuration. # enable log debug‐mode # # Module epm configuration. # # # Module erps configuration. # # # Module esrp configuration. #


# # Module ethoam configuration. # # # Module etmon configuration. # # # Module exsshd configuration. # # # Module hal configuration. # # # Module idMgr configuration. # # # Module ipSecurity configuration. # # # Module ipfix configuration. # # # Module lldp configuration. # configure lldp port 11 advertise port‐description configure lldp port 11 advertise system‐name configure lldp port 11 advertise system‐capabilities configure lldp port 11 advertise management‐address configure lldp port 11 advertise vendor‐specific dot1 port‐vlan‐id configure lldp port 11 advertise vendor‐specific dot3 mac‐phy configure lldp port 11 advertise vendor‐specific dot3 power‐via‐mdi configure lldp port 11 advertise vendor‐specific med capabilities configure lldp port 11 advertise vendor‐specific dot1 port‐protocol‐vlan‐id vlan voice configure lldp port 11 advertise vendor‐specific med policy application voice vlan voice dscp 46 # # Module mrp configuration. # # # Module msdp configuration. # # # Module netLogin configuration.


# # # Module netTools configuration. # configure bootprelay add 10.40.12.11 vr VR‐Default enable bootprelay ipv4 vlan data enable bootprelay ipv4 vlan Default enable bootprelay ipv4 vlan voice configure bootprelay vlan Default add 10.40.12.11 configure bootprelay vlan data add 10.40.12.11 configure bootprelay vlan voice add 10.40.12.11 # # Module ntp configuration. # # # Module openflow configuration. # # # Module ospf configuration. # configure ospf vlan data priority 0 configure ospf vlan Default priority 0 configure ospf vlan voice priority 0 # # Module ospfv3 configuration. # # # Module pim configuration. # # # Module poe configuration. # # # Module policy configuration. # # # Module rip configuration. # # # Module ripng configuration. # #


# Module snmpMaster configuration.# # # Module stp configuration. # # # Module synce configuration. # # # Module techSupport configuration. # enable tech‐support collector # # Module telnetd configuration. # # # Module tftpd configuration. # # # Module thttpd configuration. # configure ssl certificate hash‐algorithm sha512 # # Module twamp configuration. # # # Module vmt configuration. # # # Module vrrp configuration. # # # Module vsm configuration. #

* X440‐24p.3 #


LLDP Configuration The following section describes the configuration procedure for enabling LLDP on Extreme Summit x440 series

switches.

1. Log into the EXTREME Summit x440 series switch using serial console and enter following configuration: configure lldp port 11 advertise port‐description configure lldp port 11 advertise system‐name configure lldp port 11 advertise system‐capabilities configure lldp port 11 advertise management‐address configure lldp port 11 advertise vendor‐specific dot1 port‐vlan‐id configure lldp port 11 advertise vendor‐specific dot3 mac‐phy configure lldp port 11 advertise vendor‐specific dot3 power‐via‐mdi configure lldp port 11 advertise vendor‐specific med capabilities configure lldp port 11 advertise vendor‐specific dot1 port‐protocol‐vlan‐id vlan voice configure lldp port 11 advertise vendor‐specific med policy application voice vlan voice dscp 46

VLAN Configuration

The following section describes configuration procedure for creating default and voice VLAN on EXTREME switches. This Application Note assumes Switch uplink is further connected to layer 3 device which will take care of routing or any other services like DHCP.

1. Log into the Extreme Summit switch using serial console and enter following commands to create vlan. Following example is for voice vlan:

create vlan "voice" configure vlan voice tag 3 configure vlan voice add ports 1‐22 tagged configure vlan Default ipaddress 10.40.12.3 255.255.255.0 enable ipforwarding vlan Default

2. Configure dhcp relay by executing following commands: configure bootprelay add 10.40.12.11 vr VR‐Default enable bootprelay ipv4 vlan data enable bootprelay ipv4 vlan Default enable bootprelay ipv4 vlan voice configure bootprelay vlan Default add 10.40.12.11 configure bootprelay vlan data add 10.40.12.11 configure bootprelay vlan voice add 10.40.12.11

QOS Configuration The following section describes the configuration procedure for enabling QOS on Extreme Summit x440 series

switches.

1. Log into the EXTREME switch and execute following commands to enable QOS: create qosprofile "QP4” create qosprofile "QP6" configure diffserv examination code‐point 24 qosprofile QP4


configure diffserv examination code‐point 46 qosprofile QP6 enable diffserv examination ports all disable dot1p examination ports all

EXTREME Switch Troubleshooting The following section describes basic troubleshooting procedures

Power Consumption

To check power consumed by ShoreTel phone on specific port of switch: * X440‐24p.1 # sh inline‐power info ports 11 Port State Class Volts Curr Power Fault (mA) (Watts) 11 delivering class0 55.6 63 3.500 None * X440‐24p.2 #

VLAN Configuration

To verify VLAN configuration, execute following command : * X440‐24p.3 # sh vlan "voice" VLAN Interface with name voice created by user Admin State: Enabled Tagging: 802.1Q Tag 3 Description: None Virtual router: VR‐Default IPv4 Forwarding: Enabled IPv4 MC Forwarding: Disabled Primary IP: 10.140.9.1/24 IPv6 Forwarding: Disabled

IPv6 MC Forwarding: Disabled IPv6: None STPD: None Protocol: Match all unfiltered protocols Loopback: Disabled NetLogin: Disabled OpenFlow: Disabled TRILL: Disabled QosProfile: None configured Egress Rate Limit Designated Port: None configured Flood Rate Limit QosProfile: None configured Ports: 22. (Number of active ports=3) Tag: 1, 2, 3, 4, 5, 6, *7, 8, 9, 10, *11, 12, 13, 14, *15, 16, 17, 18, 19, 20, 21, 22 Flags: (*) Active, (!) Disabled, (g) Load Sharing port (b) Port blocked on the vlan, (m) Mac‐Based port (a) Egress traffic allowed for NetLogin (u) Egress traffic unallowed for NetLogin (t) Translate VLAN tag for Private‐VLAN


(s) Private‐VLAN System Port, (L) Loopback port (x) VMAN Tag Translated port (G) Multi‐switch LAG Group port (H) Dynamically added by MVRP (D) TRILL Designated, (A) TRILL Appointed Forwarder (I) Dynamically added by IDM (U) Dynamically added uplink port (V) Dynamically added by VM Tracking * X440‐24p.4 #

LLDP Configuration

To check LLDP information of connected ShoreTel IP phone on a specific port of a switch: * X440‐24p.1 # show lldp neighbors detailed

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ LLDP Port 7 detected 1 neighbor Neighbor: (5.1)10.140.8.103/00:10:49:00:C4:B9, age 21 seconds ‐ Chassis ID type: Network address (5); Address type: IPv4 (1) Chassis ID : 10.140.8.103 ‐ Port ID type: MAC address (3) Port ID : 00:10:49:00:C4:B9 ‐ Time To Live: 120 seconds ‐ System Name: "Serial Number: 00104900C4B9" ‐ System Description: "Shoretel 560 Boot Version: S26.3.9.7 on Mar 20 20\ 14 App Version: S26.3.9.10 on Mar 3 2015 18:39:02" ‐ System Capabilities : "Bridge, Telephone" Enabled Capabilities: "Bridge, Telephone" ‐ MED Capabilities: "MED Capabilities, Network Policy, Location Identificati on, Extended Power via MDI ‐ PD"

MED Device Type : Endpoint Class III (3) ‐ IEEE802.3 MAC/PHY Configuration/Status Auto‐negotiation : Supported, Enabled (0x03) Operational MAU Type : 100BaseTXFD (16) ‐ MED Network Policy Application Type : Voice (1) Policy Flags : Known Policy, Untagged (0x0) VLAN ID : 0 L2 Priority : 5 DSCP Value : 46 ‐ MED Extended Power‐via‐MDI Power Type : PD Device (1) Power Source : PSE (1) Power Priority: Unknown (0) Power Value : 6.5 Watts ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ LLDP Port 24 detected 1 neighbor Neighbor: 00:A0:C8:25:C3:9E/eth 0/6, age 9 seconds ‐ Chassis ID type: MAC address (4) Chassis ID : 00:A0:C8:25:C3:9E


‐ Port ID type: Locally assigned (7) Port ID : "eth 0/6" ‐ Time To Live: 120 seconds ‐ Unknown organizational specific TLV: Length=17 bytes, OUI=00A0C8 HEX Dump [000]: 00 A0 C8 03 4E 65 74 56 61 6E 74 61 20 31 33 35 HEX Dump [010]: 35 ‐ System Name: "NV1355" ‐ System Description: "NetVanta 1355, Version: 16.04.00.SC.E, Date: Fri \ Dec 21 14:53:45 2007" ‐ System Capabilities : "Bridge, Router, Telephone" Enabled Capabilities: "Bridge, Router, Telephone" ‐ Management Address Subtype: IPv4 (1) Management Address : 10.40.12.7 Interface Number Subtype : ifIndex (2) Interface Number : 28 Object ID String : "0.0.0.0.1.0.0.0.3.0.0.0.6.0.0.0.1.0.0.0.2\ .0.0.0.1.0.0.0.2.0.0.0.2.0.0.0.1.0.0.0.1.\ 0.0.0.28" * X440‐24p.2 #


EXTREME Networking Technical Support For post sales support its: http://www.extremenetworks.com/support

The sales contact for US is: 1.888.257.3000

Document and Software Copyrights

Copyright © 2009 by ShoreTel, Inc., Sunnyvale, California, U.S.A. All rights reserved. Printed in the United States

of America. Contents of this publication may not be reproduced or transmitted in any form or by any means,

electronic or mechanical, for any purpose, without prior written authorization of ShoreTel Communications, Inc.

ShoreTel, Inc. reserves the right to make changes without notice to the specifications and materials contained

herein and shall not be responsible for any damage (including consequential) caused by reliance on the materials

presented, including, but not limited to typographical, arithmetic or listing errors.

Trademarks

The ShoreTel logo, ShoreTel, ShoreCare, ShoreGear, ShoreTel and ControlPoint are registered trademarks of

ShoreTel, Inc. in the United States and/or other countries. ShorePhone is a trademark of ShoreTel, Inc. in the

United States and/or other countries. All other copyrights and trademarks herein are the property of their

respective owners.

Disclaimer

To be “ShoreTel Certified” means that Technology Partner's product will interoperate with the ShoreTel system,

but ShoreTel does not certify that the features or functionality of Technology Partner's product will perform as

specified by Technology Partner nor that Technology Partner's product will meet your specific application needs

or requirements. To inter‐operate means that Technology Partner's product is able to exchange, use and share

information with the ShoreTel system. The information contained within this document is accurate at the time

the testing. ShoreTel and IN member’s software/hardware and screen shots may change and therefore no

longer be applicable.

Company Information

ShoreTel, Inc. 960

Stewart Drive

Sunnyvale, California 94085 USA

+1.408.331.3300

+1.408.331.3333 fax

Configuration Guide For Use with Extreme Summit x440 ...

Documents

Transcript of Configuration Guide For Use with Extreme Summit x440 ...