Confidential 1 KX-TDA200/100 System KX-TDA200/100 System (Ver.2.0) Chapter 6.0 Enhanced Items...

Confidential 1

KX-TDA200/100 SystemKX-TDA200/100 System (Ver.2.0)

Chapter 6.0

Enhanced Items

Panasonic Communications Co., Ltd.Panasonic Communications Co., Ltd.

Network Business CompanyNetwork Business Company

Edition 1.3 07 Oct., 2004Edition 1.3 07 Oct., 2004

2Confidential

• General

GeneralSystem Highlights

New Feature & Condition

System Capacity Expansion

Software Compatibility

New Hardware

System Connection Diagram

3Confidential

System Highlights

V1.0

V1.1

Networking(QSIG), Call Center, VoIP Gateway,CTI (CSTA/TAPI), T76xx Line Up, Wireless System

- Digital XDP & Double Extension Capacity by MEC - 1 Slot VoIP Gateway 4ch Card (Panasonic proprietary)- New CS to DPT Port

V2.0 - IP-GW16- IP-PT Extension- Network DSS- Sending Caller ID to SLT port- External Sensor & Relay- Hotel Feature Enhancement (7 items)- LCD for VM Operation

4ConfidentialTD

A0920New Feature & Condition - 1

16 ports IP-GW(CO) card

IP PT Extension

NDSS (Network Direct Station Selection)

Caller ID to SLT (Analogue Extension)

External Sensor

External Relay

Wake up Call Set with Voice Guidance (KX-TVA/TVM)

Voice Message Delete when Check Out(KX-TVA/TVM)

Check in / Check out Control

Telephone Charge Print Out when Check out

Remote Wake up Call Set

SMDR for External Hotel Application

SMDR(Programmable) for External Hotel Application

LCD for VM Operation (KX-TVA/TVM)

VM Message Number Display on LCD(KX-TVA/TVM)

CTI Enhancement

PC Phone / PC Console Improvement - DDI Name

PC Phone / PC Console Improvement - Copy from Outlook (International Code)

Behavior of ICD-G Key & ICM key with CTI including PC Phone / PC Console

Highlight

Hotel

Voice Mail

CTI

O

O

IP-EXT16 Card, PT(KX-NT136)

EXT-CID Card, SLT8

EIO4, OPB3

EIO4, OPB3

KX-TVM

KX-TVM

6line_PT

MEC

KX-T76xx w/ LCD, KX-TVM

6line_PT, KX-TVM

Another conditionFeatures

5Confidential

TDA09

20

New Feature & Condition - 2

Making Calls

Receiving Calls

Hold / FWD / TR

Others

TRS by Dial Time out

Speed Dial Name Reference for Public Call through Private Network

Incoming Call Log for Public Call through Private Network

CLIP when Transfer

System Speed Dial Memory Expansion

Personal(Station) Speed Dial Memory Expansion

Analogue CO line monitor

20 Pause for 2nd Dial Code

Walking Extension for Virtual Extension (For "Hot Disking" Use)

Dummy Extension of PBX for CO Telephone Number

SMDR 24H Format

SMDR Caller ID Modification

Outgoing message (OGM) recording duration expansion

MEC

MEC

Features Another condition

6Confidential

System Capacity ExpansionWithout MEC (TDA0105), no change on system capacity made.

1.Number of Ports

(Ver.1.1)

3. System Speed Dial

(Ver.2.0)

4. Station Speed Dial

(Ver.2.0)

Without MEC (TDA0105) With MEC (TDA0105)

TDA100

TDA200

80 (108)

160 (216)

32digits, 1000 entries/System

32 digits, 10 entries/EXT

TDA100

TDA200

TDA100

TDA200

144 (158)

288 (316)

32digits, 1000 ent./System

+ 1000 ent./Tenant x 8

32 digits, 100 entries/EXT

* The number of extension is consisted with all type of extension including IP-PT.

2.Number of Extension

(Ver.1.1)

TDA100

TDA200

64

128

128

256

With MEC (TDA0105), following item’s capacities are expanded.

80 ports 108 ports 144 ports 158 ports

Slot1 16 Ext. Same as left Slot1 16 Ext. + 16DXDP Same as leftDLC16 DLC16Slot2 16 Ext. Same as left Slot2 16 Ext. + 16DXDP Same as leftDLC16 DLC16Slot3 16 Ext. Same as left Slot3 16 Ext. + 16DXDP Same as leftDLC16 DLC16Slot4 16 CO 30 ch Slot4 16 Ext. + 16DXDP Same as leftLCOT16 DLC16E1Slot5 16 CO 30 ch Slot5 16 CO 30 chLCOT16 LCOT16E1 E1

MEC

Configuration of “1.Number of Ports” for TDA100

7Confidential

Software CompatibilityMPR / LPRMPR / LPR

MPR 2.0xxMPR 2.0xxMPR 1.0xx & 1.1xxMPR 1.0xx & 1.1xx

YesYes

Yes w/o TVMYes w/o TVM

YesYes

YesYes

DLC/DHLC 2.008DLC/DHLC 2.008

DLC/DHLC 2.005DLC/DHLC 2.005

MPR / PC maintenance consoleMPR / PC maintenance console

MPR 2.0xxMPR 2.0xxMPR 1.0xx & 1.1xxMPR 1.0xx & 1.1xx

NoNoYesYes1.071.07

InstallationInstallation

YesYesNoNo2.02.0

YesYesYesYes1.07 + 2.01.07 + 2.0

SLC 2.002SLC 2.002

SLC 1.002SLC 1.002

YesYes

YesYes

YesYes

Yes w/o EXT-CIDYes w/o EXT-CID

OPB3 1.006OPB3 1.006

OPB3 1.002OPB3 1.002

YesYes

YesYes

YesYes

Yes w/o EIO4 (Relay/Sensor)Yes w/o EIO4 (Relay/Sensor)

IPGW4E firmware 1.2IPGW4E firmware 1.2

IPGW4E firmware 1.0, 1.1IPGW4E firmware 1.0, 1.1

YesYes

YesYes

YesYes

Yes w/o NDSSYes w/o NDSS

8Confidential

New Hardware – Option Card

EIO4(External Input/Output)

KX-TDA0164

4-port external input/output card.To be mounted on the OPB3 card (TDA0190).

TDA200 4TDA100 2

IP-EXT16(16ch VoIP Extension)

KX-TDA0470

TDA200 8TDA100 4

16-channel VoIP extension card.Compliant with Panasonic proprietary protocol, and ITU-T G.729a and G.711 CODEC methods.

EXT-CID(Extension Caller ID)

KX-TDA0168

Sends Caller ID signals to extension ports.To be mounted on the SLC8 card (TDA0173).

TDA200 8TDA100 4

IP-GW16(16ch VoIP Gateway)

KX-TDA0490

TDA200 4TDA100 2

16-channel VoIP gateway card.Compliant with VoIP H.323 V.2 protocol, and ITU-T G.729a, G.723.1, and G.711 CODEC methods.

Upgrade SD(Upgrade to enhanced V2.0)

KX-TDA0920

TDA200 1TDA100 1

Optional SD Memory Card to upgrade the Hybrid IP-PBX with software version 1 or 1.1 to version 2.0,And it adds NDSS feature and CTI enhancement, too.

9Confidential

Navigation Key

Dual color 24 Flexible Keys

Visible Large Ring/Msg Lamp

6 Lines 24 digits LCD /w backlit

RJ45RJ45 RJ45RJ45

RJ11RJ11

New Hardware – Peripheral - 1KX-NT136 (IP-PT)Connection via IP

User Interface is same as T7636.

Almost of KX-T7636 Functions is in it.

PC-Phone/Console doesn’t work with.

PC Maintenance Console doesn’t connect.

TDATDA

LANLAN

PCPC

BenefitRemote Office, Easy moving in network, Cost saving

10Confidential

New Hardware – Peripheral - 2TVM Series (New Voice Processing System)

All function of TVP series and New features listed below.

TVM50

TVM200

- VM operation with LCD (T7636, T7633 or T7630 is required.)

- Message notification by LCD message (6 lines LCD is required.)

- Wake-up call set with voice guidance for Hotel application

- Voice message delete when check-out for Hotel application (6 lines LCD is required.)

TVM200 TVM50

Connection to PBX

Max. channel

Max. mailbox

Recording media

Recording time

Programming I/F

TVP200 TVP50

DPT/SLT port DPT/APT/SLT port

6ports(12ch) 2ports (2ch)

1024 32 mailboxes

HDD Flash

32h 6h

Hyper Terminal

RS232C, Modem

Hyper Terminal

RS232C

VM-Link, DPT/SLT DPT/APT/SLT port

12ports (24ch) 6ports (6ch)

1024 64

HDD Flash

128h 8h

PC Soft

USB, LAN, Modem

PC Soft

USB, LAN, Modem

11Confidential

System Connection Diagram - 1

Trunk (Telephone Company Lines)

Analogue / BRI / PRI / T1 / E1

Trunk (Telephone Company Lines)

Analogue / BRI / PRI / T1 / E1

Remote PC

PC PC

SLT DPT APT DSS DPT DSS

SLT

FAX

Wireless

Phone

ISDN

Telephone

CS

PSVoice　 Processing

System

PC

Router

Server PC

Private

IP Network

Private

IP Network

T7633/36 PC

USB

T7600 DPT T7600 DPT

DXDP

Pager/

Speaker

Amplifier

PC or Printer

Batteries

PCIP-PT

External Sensor/ External Relay Device

Doorphone & Door Opener

BGM/MOH

Peripheral Connection Legacy Connection

IP Connection

12Confidential

System Connection Diagram – 2DLC16 (TDA0172)

DLC8 (TDA0171)

DHLC8 (TDA0170)

MSLC16 (TDA0175)

SLC16 (TDA0174)

SLC8 (TDA0173)

CSIF4 (TDA0143)

CSIF8 (TDA0144)

CTI-LINK (TDA0410)

OPB3 (TDA0190)

DPH4 (TDA0161)

DPH2 (TDA0162)

ECHO16 (TDA0166)

MSG4 (TDA0191)

LCOT4 (TDA0183)

LCOT16 (TDA0181)

LCOT8 (TDA0180)CID/PAY8 (TDA0189)

CID8 (TDA0193)

DID8 (TDA0182)

E&M8 (TDA0184)

BRI4 (TDA0284)

BRI8 (TDA0288)

PRI30 (TDA0290CE/CJ)

PRI23 (TDA0290)

T1 (TDA0187)

E1 (TDA0188)

IP-GW4 (TDA0480)

IP-GW4E (TDA0484)

MPR

MEC (TDA0105) RMT (TDA0196)

PSU-S/M/L

TDA0108/0104/0103

T7633/36PC

T7600 DPTT7600 DPT

DPT DSS PT-IF CS

PSVoiceProcessingSystem

SLT

FAX

APT

WirelessPhone

SLT

Same capability of DLC

FAXWirelessPhone

SLT

CSLAN

PC Server PCDoorphone & Door Opener

Server PC Pager/Speaker

Amplifier

Radio

PS

Router

Batteries

SMDR

PC

PS

TN

Analogue

E&M

ISDN BRI

ISDN PRI

T1

E1

PrivateIP Network

IP-GW16 (TDA0490) EIO4 (TDA0164)

IP-EXT16 (TDA0470)

EXT-CID (TDA0168)

LAN

External Sensor / External Relay Device

IP-PT PC

13Confidential

•Function – Highlight

Function - Highlight

14Confidential

16 ports IP-GW Card - 1- model number is KX-TDA0490.- 16ch IPGW Card occupies a Single slot in TDA100/200

Physical I/F single Ethernet 10/100BaseT (auto sense) LED’s - Status, Link, Data, Online, Alarm & Busy

- G729a/G723.1/G711- T.38 (FAX) mode is not supported (FAX = G711)- Configuration using Web browser (English)

- 100% call compatibility with TDA0484/3480- Interoperability with TDA0480

Incoming call, Outgoing call and CLIP only.- Interoperability with another manufacturers :

Not guaranteed.- Power factor is 0.

15Confidential

16 ports IP-GW Card - 2

The compatibility of the IPGW4 (TDA0480), IPGW4E (TDA484), IPGW16 (TDA0490) and the TDA30 IPGW4 (TDA3480) is described in the table below:

Compatibility TDA0480 TDA0484/TDA3480 TDA0490

Signalling H.323 V2 H.323 V2 H.323 V2

QSIG service Proprietary H.323 V4 Annex M1 H.323 V4 Annex M1

Max networked IPGW’s 511 511 511

Voice Codec G.723/G.729a G.711/G.723.1/G.729a G.711/G.723.1/G.729a

FAX Protocol T.38 G.711 G.711

Echo canceller 16ms 16ms 48/128ms

AGC Yes No No

DTMF Tone Detection Yes Yes Yes

SNMP Yes No No

Event Notice by email Yes No No

DHCP No Yes (Client) Yes (Client)

NAT No No No

Compatibility

16Confidential

16 ports IP-GW Card - 3

FunctionTDA0480

connected toTDA0480

TDA0384/TDA0484/TDA0490

Connected to

TDA0384/TDA0484/TDA0490

TDA0384/TDA0484/TDA0490

Connected to

TDA0480CLIP OK OK OK

COLP OK OK No

COLR OK OK No

CNIP OK OK No

CNIR OK OK No

CONP OK OK No

CONR OK OK No

CT(Avoid Tromboneing) OK OK No

CF(Avoid Tromboneing) OK OK No

CCBS OK OK No

Making/Receiving Call OK OK OK

Fax Connection OK OK No

The interoperability of the IPGW4 (TDA0480), IPGW4E (TDA484), IPGW16 (TDA0490) and the TDA30 IPGW4 (TDA3480) is described in the table below:

Interoperability

17Confidential

Two type wirings require two types of construction, maintenance and their time.

IP PT Extension (Benefit 1)

Router

LAN

Router

LAN

IP-PT

What is benefit of IP Extension

Unified wiring give low cost construction and maintenance.

One type wiring save them.

18Confidential


LAN

EXT.201 EXT.201EXT.201 EXT.201?

Slot:201 Port:01

Slot:301 Port:02

MOVEJust MOVE


Setting change is not necessary Easy & Quick move enable

Setting change will be required.

IP-PT IP-PT

Normal Extension

IP Extension

19Confidential


LeasedLine

PBX PBX

Branch Office

Head Office


PBX is not necessary for Branch Office. All setting can be controlled by Head Office.

Router Router

IP NetworkPrivate

IP-PT IP-PT

PBX

LANLAN

Head Office

Branch Office

20Confidential

IP PT –1 (Sample Configuration)

Sample of configurationSample of configuration-Feature of IP PT(KX-NT136) is basically same as KX-T7636.Feature of IP PT(KX-NT136) is basically same as KX-T7636.

LAN

Head Office Branch Office

Primary Ethernet Port

IP-EXT16

IP-PT

IP-PT

IP-PT

(DHCP Server)

Secondary Ethernet Port

PC

IP NetworkPrivate

Except: OHCA, USB connection, 12CO Key connection, Digital XDP, and Walking ExtensionExcept: OHCA, USB connection, 12CO Key connection, Digital XDP, and Walking Extension

21Confidential

IP PT –2 (Requirements)

-DHCP (Dynamic Host Configuration Protocol) Server is not supported by IP-EXT16 card.

Note: Following features are not supported.Note: Following features are not supported.-OHCA, USB connection, 12CO Key connection, Digital OHCA, USB connection, 12CO Key connection, Digital XDP, and Walking ExtensionXDP, and Walking Extension

- Cable: 100 BASE-TX Category 5 or higher

- Power source: Power-over-Ethernet (PoE)or KX-A237 AC Adaptor is necessary

Requirements

- IP-EXT16 card is required.

You need to assign IP address of IP-EXT16 card by manual.

IP-PT cannot be used for initial set-up of PBX system.

22Confidential

IP PT –3 (Programming IP-EXT. Card)Programming Instruction

Assign IP Address for IP-EXT. card by manual

Assign IP Address for IP-PT Register IP-PT

IP Address & Subnet mask (GW Address for IP-PT)

1. Configuration 1. Slot

IP-EXT16 Property2. System 14. IP Extension Setting

* If necessary (See page IP-PT7)

Step 1 Step 2 Step 3

23Confidential

2. Press “Set-up” soft key from 2nd time

Assign IP Address for IP-EXT. card


Programming Instruction

IP PT –4 (Programming IP-PT)

At start up

1. Power on IP-PT 3. Select “Network”


IPL Start… Now Loading

Searching…

Setup

Menu

Please first setup !OK [ENTER]

MenuNetworkPBXVLANMaintenance

STORE EXIT CONT ENTER

LCD status 2. At 1st installation

2. From 2nd time

1. Start up

2. Press “Enter” key at 1st installationor

3. Menu select

24Confidential





With DHCP Server

4. DHCP: Enable 5. Select “PBX” 6. Assign IP Address for IP-EXT16 card

7. Store

(Automatic Assignment: IP Address for Subnet mask, IP-PT Default GW)


DHCP Enable

IP Address 0. 0. 0. 0

Subnet Mask 0. 0. 0. 0

NEXT

Disable

EXIT ENTER



PBX IP Address ?

192.168. 0.100

EXIT CLER ENTER

LCD status4. 5. 6.

25Confidential





Without DHCP Server

4. DHCP: Disable 5. Select “IP-Address” 6. Assign IP Address for IP-PT

7. Select “Subnet mask” 8. Assign IP Address for Subnet mask

* 9. Select “Default GW”

11. Select “PBX” 12. Assign IP Address for IP-EXT16 card

*10. Assign IP Address for Default GW 13. Store


DHCP Enable

IP Address192.168.0.101

Subnet Mask255.255.255. 0

NEXT

Disable

EXIT ENTER



PBX IP Address ?

192.168. 0.100

EXIT CLER ENTER

LCD status 4. – 8.11. 12.

26Confidential





Without DHCP Server


LAN


IP-EXT16

IP-PT

IP-PT

PC

IP NetworkPrivate

DHCP Enable

Default Gateway192.168. 0. 1

PREV

Disable

EXIT ENTER

Gateway: 192.169.0.1 Gateway:10.75.0.1

Router Router

27Confidential

IP PT –8 (Register IP-PT to PBX)




1. Configuration 15. IP-Extension Port

Select: ON

Registration:Start

Confirm: OK

LCD of IP-PT is changed to normal

Registration


30 SEP. 11:09AM FRI

PROG INFO RING MENU

UNREGISTERED TO SERVER

OK[ENTER]

28Confidential

IP PT –9 Virtual LAN

Necessary

Information

Local Office Remote Office

IP-PT EXT.101 IP-PT EXT.102 IP-PT EXT.103 IP-PT EXT.104

IP-PT IP Address 192.168.0.101 192.168.0.102 10.75.0.103 10.75.0.104

Subnet Mask Address

255.255.255.0 255.255.255.0

Default Gateway Address

192.168.0.1 10.75.0.1

Card IP Address 192.168.0.100 10.75.0.100

VLAN ID 1VLAN ID is necessary for IP-PT and VLAN(L2 Switch)

VLAN Name : SalesID : 1Port on VLAN: 1-4Tagged VLAN: Null


PHY. Port 1 2 3 4 5 6 VLAN No. 1 1 1 1 2 2

VLAN(L2 Switch)

29Confidential

IP PT –10 Virtual LAN



VLAN Enable

Primary port

Secondary port (TO PC)

Disable

EXIT ENTER

Primary port

VLAN ID

VLAN Priority

1

7

PHY. Port 1 2 3 4 5 6 VLAN No. 1 1 1 1 2 2

L2 Switch

LANIP-EXT16

IP-PT IP-PT

Gateway: 192.169.0.1 Gateway:10.75.0.1



VLAN ID = 1

VLAN ID = 1

VLAN ID = 1

VLAN ID = 1

LCD status

IP NetworkPrivate

Router

VLAN ID = 1 VLAN ID = 1

L2 switch configuration


30Confidential

QSIG, VoIP

303

302

304

NetworkMonitorPBX

MonitoredPBX

NDSS (Network Direct Station Selection)- NDSS is a DSS key referring to an extension of other PBX

- It works with both of the open numbering and the closed numbering.

- It’s used for monitoring extension status and making or transferring calls.

- Only one TDA can be a Monitor PBX

- Maximum 32 extensions in the network can be monitored.

- Any extension of Monitor TDA can have NDSS.(Network Operator)

- Both of Monitor PBX and Monitored PBX require KX-TDA0920

Network Operator

BenefitCentralized Operator

Idle

Busy

KX-TDA0920Mandatory

KX-TDA0920Mandatory

304 To call to extensionPush =

TDA0920is required.

IdleOff =302

Busy, DND (trunk)Red On =303

31Confidential

NDSS – 2TDA0920

is required.

QSIG, VoIPNetwork

ID=0

ID=0

ID=0

ID=0

ID=0

ID=0

ID=0

Monitored Ext

ID=2

Monitored Ext

ID=3

Monitored Ext

ID=4

ID=1

Network Operator

ID: 2-8 Monitored PBX

Each ID must be unique in the network.

V2.0 or later

ID: 0 (default) Normal PBX

It’s neither a monitor PBX nor a Monitored PBX.

Some PBXs transmit status information of Monitored Ext.

V2.0 or later

ID: 1 Monitor PBX

Only one in the network.

V2.0 or later

ID: none Other PBX

Before V2.0, TDA30, TD500

Each TDA100/200 V2.0 has Network PBX ID.ID=1

ID=2-8

ID=0 (default)

Monitor PBX

Monitored PBX

Normal PBX

Network PBX ID

1PRG* Refer

32Confidential

NDSS – 3TDA0920

is required.

Status Information Routing

Monitored Ext

ID=3

102

ID=1

Network Operators Monitored Ext

ID=2

ID=0

ID=0

ID=0

ID=0

ONOFFONOFFONOFFON

ON

OFF

101

OFF103

ISDN Q-SIG ISDN Q-SIG ISDN Q-SIG

ISD

N Q

-SIG

ISD

N Q

-SIG

IP NetworkVoIP Q-SIG

302

402

Idle Busy

Idle Busy

302 Busy

302 Busy

402 Busy

402 Busy

Transmitting route for Status Information data

must be constructed.

NDSS data TransferVoIP ISDN : Enable

2PRG* Refer

Case : ISDN (PRI, BRI) Q-SIG

Network Data TransferYes (ON) : Send

No (OFF) : Receive* Q-SIG port base setting

ON OFF

5PRG* Refer

ID=3

IPG

W a

t s

lot1

IPG

W a

t s

lot3

IPG

W a

t s

lot6

Network Operator = 102IPGW Card Slot to send out = slot3

Status Info. IP Routing Table

402 Busy

Case : VoIP Q-SIG

3PRG* Refer

33Confidential

NDSS – 4Network Monitor Extensions Table

Monitored Ext

ID=3

102

ID=1

Network Operators

Monitored Ext

ID=2101

302

402

QSIG, VoIPNetwork

Starting monitoring & Stopping monitoring

No.

001

002

003

032

Ext. Name for reference

302

Network PBX ID

2

3402

Monitor Extensions Table

* Only for a monitor PBX

Ma

x.

32

Ex

t.

* 7 48C.Tone

#Network Ext. No.

NDSSor

NDSSTo start monitoring

To stop monitoring

All NDSS start monitoring.

* Any extension can do.

* Only a manager extension can do.

4PRG* Refer

TDA0920is required.

34Confidential

NDSS – 5

Conditions-TDA0920 must be in both of monitor PBX and monitored PBX.

- The firmware (not LPR) of IP-GW4E(TDA0484) must be Version1.2 or later.

- Network PBX ID:1-8 must be unique in the network.

- It’s possible to stop monitoring at monitored PBX by PC Maintenance Console.

- NDSS does not work on PC-Phone / PC-Console.

- You can not back up all of NDSS configuration into DSYS.( * You need to check and re-configure some part of NDSS after initialize reset, even you have DSYS as backup. )

(1) Connect a browser to IP-GW4E. ( Updating is done through a browser. It’s not from PC Maintenance Console.)

(2) Login to IP-GW4E with the name: Installer, PW: Installer.

(3) Change the status of the card from “RUN” to “STOP”.

(4) Now, you can upload a firmware and update the card with the procedure in the manual (3.3 Data Management).

Updating Firmware of IP-GW4E

TDA0920is required.

35Confidential

NDSS – 6Programming Instruction - 1

Network PBX ID Assignment1PRG

2PRG

3PRG

4PRG

On

ly w

he

n I

D =

2 -

8

On

ly w

he

n I

D =

1

NDSS data transfer VoIP ISDN

ISDN VoIP

Status Info. Routing Table

Network Monitor Extensions Table

How many time NDSS data can be transferred

Up

to

32

Frequency of NDSS data from IPGW or PRI card

Any extension number which is reachable from this monitor PBX

A slot number of IPGW card which the data is sent from

* The PBX(ID=0) can’t perform this direction.

TDA0920is required.

36Confidential

NDSS – 7Programming Instruction - 2

Case : ISDN (PRI, BRI) Q-SIG

Network Data TransferYes (ON) : Send

No (OFF) : Receive* Q-SIG port base setting

ON OFF

5PRG

Data transmitting direction over Q-SIG

TDA0920is required.

37Confidential

Caller ID : 12345678

Caller ID to SLT - 1Caller ID from SLC port to Normal Telephone, Cordless Telephone, FAX machine,etc.

FSK (ETSI and Bellcore) signaling only

16 digits maximum

Adding Trunk Access Number for calling back Purpose (Programmable)

TDA0173 (SLC8) and TDA0168 (EXT-CID) are required.

PSTN12345678(0, 9) +

Only FSKFSK, DTMF, others

Max. 16 digitsFor Calling back (Programmable)

BenefitRecognizing caller, easy calling back

302

SLC8

EXT-CID

(0,9) 12345678

302302

38Confidential

Receiving a call

Answer and transfer

On Hook

302

Caller ID to SLT - 2Action in Unscreened transfer operation

TR

CID:12345678

302

12345678

12345678

- CID is between 1st bell and 2nd bell

- Incoming Call Log Information is not shown on the SLT.

- TDA0168(EXT-CID) must be installed on TDA0173(SLC8).

- LPR software of TDA0173 (SLC8) must be 2.002 or later.

- One EXT-CID supports 8 ports. (All ports of SLC8 which has EXT-CID on it can send out CID.)

- EXT-CID can be installed onto all off SLC8s in a TDA system.

Condition

SLT stops ringing

and rings again

39Confidential

Caller ID to SLT – 3Programming items - 1

Adding Trunk Access Number: Enable/Disable

Adjusting interval: 0-15

Enable sending CID to Ext.: Enable/Disable

40Confidential

Caller ID to SLT - 4Programming items - 2

CID Modification table

SLC8

Property

Check if EXT-CID is installed

- modified CID will be sent to SLT port

41Confidential

Caller ID to SLT – 5

Priority of items displayed when TDA is receiving FSK CID

FSK CID may bring information such as private, out of area or long distance.

If TDA received

“private” or “out of area”

“long distance”

Another items

“private” or “out of area” is displayed.

“long distance” is displayed.

Caller ID and Name is displayed.

Result

prio

rity

high

low

42Confidential

External Sensor - 1

If a device connected to the external sensor becomes active, there are 3 outcomes:

(1)Sensor call will be generated to the pre-programmed extension

(2)Generates SMDR Printout

(3)Generates 3rd Party CTI command

The sensor call destination can be a PT, SLT,PS, or ISDN extension but not an ICD-Group.

- If a sensor call arrives at an extension

Display : pre-assigned name of sensor port [5.5]

Ring : Distinctive ringer pattern can be assigned (triple, or special double ring, so on) [2.8.3]

- Special Tone(Dial Tone 3) will be sent to answering extension.

- If nobody answer sensor call, sensor call stops with pre-programmed time [2.4.3].

43Confidential

External Sensor - 2

Input Signal Decision Time = This is the time delay before Extension begins to Ring.

Input Signal Detection Reopening Time = This is the time it takes the sensor to reset hence the time it will take to respond to the

next input.

The External Sensor has some timing parameters that can be set using the maintenance console [1.] and clicking on the OPB3 card.

Timings

44Confidential

External Sensor - 3

Power to the external sensor is provided from the EI04 card and must be grounded through the EI04 card as indicated in the diagram below. A pair of “sensor” and “common” lines are connected to the EI04 card for each external sensor. The TDA detects inputs from the sensor when the signal is under 100 Ohms.

Connection Diagram

45Confidential

External RelayExtensions can activate external relay for controlling external devices(On/Off) by feature code. There is a COS that has to be programmed to enable this feature.

It is possible to activate the relay for pre-programmed time [5.4].

The relay is the relay normally open.

And has a maximum switching voltage of : 24VDC(1A)

30VAC(1A)

46Confidential

•Function – Hotel

Function - Hotel

47Confidential

Hotel - 1

- Wake up Call Set with Voice Guidance (KX-TVA/TVM)

- Voice Message Delete at Check Out, Automatically(KX-TVA/TVM)

6 Line LCD PT for Hotel Operator

“Wake up call is set at 07:30.”

KX-TVA200 or TVM200

KX-TDA200 or TDA100

KX-T7636

- Check in / Check out Control

- Telephone Charge Print Out when Check out

- Remote Wake up Call Set

- SMDR for External Hotel Application

- Programmable SMDRfor External Hotel Application

48Confidential

Hotel - 2

Check out

Automatic telephone charge print out

Remote Wake up Call set

Automatic voice message delete

Check in button

*Check out button

Operation Assignment

Hotel Operator EXT.

*Check in / Check out

*Timed reminder Start / Answer / No response

*Programmed message

Check out + Room No. (EXT. No.) + Print / YES

Check in + Room No. (EXT. No.)

*Select print item

Dial *76*1 + Room No. + Time

Check in

*Telephone / Minibar / Others

*Charge: Margin/Tax

*TAX rate: telephone /minibar/others

*Telephone margin

*Header / Footer

49Confidential

Hotel - 3 (Check In)

- Check in / Check out Control6 Line LCD PT for Hotel Operator

Check-in: On hook status Check-in button Dial EXT.No. or DSSEnter Enter

Check-out: On hook status Check-out button Enter Dial EXT.No. or DSS Enter

50Confidential

Hotel - 4 (Wake up Call / Check Out)

-Remote Wake up Call SetDial * 7 6 *

1: Set

0: CancelorOff hook status EXT. No. or DSS

Hour: Minute (+ 0: AM 1:PM by 12H)0: Once

1: Dairyor

- Telephone Charge Print Out when Check out

Check-out: On hook status Check-out button Enter Dial EXT.No. or DSS Enter

PRINT NEXT YES (Soft Key)Enter “Minibar” and “Others”

Room:103

Telephone: 00000.00Minibar : 00000.00Others : 00000.00

EXIT NEXT PRINT

Room:103

Confirm check out ?

NO YES

Enter Room Number

EXIT ENTER

LCD status

51Confidential

Hotel - 5 (SMDR Setting)

-Programmable SMDR

for External Hotel Application

- SMDR for External Hotel Application

Check in/out

Timed Reminder Start/Answer/No Response

Printing Message (on SMDR) can be assigned.

Dial *761 Printing Message No. #

52Confidential

Hotel - 6 (Billing Sheet)

Sample of Call Billing Sheet

53Confidential

Hotel - 7 (Rate Calculation)

Margin/Tax Rate Assignment

[Calculation Method]

[Charge received from telephone company]

[1 - Tax Rate] x [1 - Margin Rate]

Advice of Charge: ISDN

[Meter indication received from telephone company] x [Call Charge Rate]

[1 - Tax Rate] x [1 - Margin Rate]

Pay tone: Analog trunk + pay tone cardMeter Pulse: E1 line

54Confidential

•Function – Voice Mail

Function – Voice Mail

55Confidential

LCD for VM Operation - 1 (Receive a Message)

SHIFT EXIT ERASE STOP

ROBINE SCHNEIDERMBX 120AUG24 03:47PMNEW 00:03:12

****------

Main Menu

Deliver Msg.

A.A. StatusCheck Distribution

EXIT

Receive Msg.

3 messages

MBX 203 AUG24 11:04AM!3275307 AUG24 09:23AM

EXIT ERASE PLAY

ROBINE2 AUG24 03:47PM!

The screen shots show how easy it is to Receive a Voice mail message with the new KX-TVM series.

Condition-PT must be T76xx with LCD.

- Max.5 Language’s

56Confidential

LCD for VM Operation - 2 (A.A Status)

Main Menu

Deliver Msg.Check Distribution

EXIT

Receive Msg.

A.A. Status

A.A. Status

Covering Extn.Mbx. Retention Mode

EXIT

Call Transfer

Incomplete Handling

EXIT DALL

Call Transfer Status

Enable ScreeningDisable Int. PagingDisable Beeper

Disable Blocking

The screen shots show how easy it is to change the automated attendant settings with the new KX-TVM series.

57Confidential

Voice Mail Message Number display on LCD

26 JUL. 10:20AM MON

PROG INFO RING MENU

Incoming Call :001Voice Message :002

The number of new messages can be indicated on the LCD of PT.

This feature is supported on TVM series voice mail.

Condition- PT with 6 line LCD

58Confidential

•Function – CTI

Function - CTI

59Confidential

CTI Enhancement

Supporting New Hardware External Sensor, IP-PT

Controlling Ring Pattern for redirected call

Setting Extension Absent Message

Another enhancement

MIC

MWL

FCO key

SP On/Off

SP Volume

Ring On/Off

LCD Display contents

PT

YES

YES

YES

YES

YES

YES

YES

IP-PT

YES

YES

YES

YES

YES

YES

YES

PS

YES

YES

YES

YES

Controlling PT

MultiPBX Loading Function 2 PBXs are controlled by TAPI.

New Functions

TDA0920is required.

Condition- KX-TDA0920 is mandatory.

- TSP Built 2.0.0.27 or later

- USB ports or LAN interface on PC

- Windows 2000(Pro, Server) or Windows XP(Pro)

* This does not mean

that PMS controls two PBXs.

60Confidential

PC Phone / PC Console Improvement

DDI(DID) name of PBX can be displayed.

DDI(DID) name of PC has priority.

For example, "+81-92-477-1234"

will be 0081924771234 or 81923771234 or 924771234 by programming.

New Features

Improvements

the operator can not answer the call from Incoming Group screen.the operator can answer the call from Incoming Group screen.

BeforeNew

New Feature Enhancement for “External Sensor”New Feature Enhancement for display the DDI Name from PBX when alerting

Import function from Outlook Phone Book(the method for International code)

Screen sentences were revised to correct sentences (except English)

When “Call Pickup by DSS ICD Group Call” is disabled by programming,

when it saved without inputting to TextMemo,

Under using Italian language,

Incoming/Outgoing record (Call Log) is not left in Call Log.Incoming/Outgoing record (Call Log) is left in Call Log.

BeforeNew

the operator cannot attach a photo into “Pop-up” except BMP.the operator can attach a photo into “Pop-up” with other than BMP format, too.

Before

New

61Confidential

•Function - Making Calls

Function – Making Calls

62Confidential

Keep (default)Disconnect Activate this feature!

TRS by Dial Timeout- TRS by Dial Time out

0: Call PTT Operator in North America

RESTRICT

00: Credit Call NO RESTRICTION

Example 1: Operation in U.S.A.

(Inter-digit timer is working in checking TRS.)

Keep Disconnect

FWD to 9CO-CO callNo DTMF-R in trunk cards

DTMF dialing can go thru. (No check)

FWD to 9CO-CO callNo DTMF-R in trunk cards

DTMF dialing can go thru. (No check)

But TDA disconnects by the timer.

PS

TN

PS

TNdials

dials

Restriction table99restrict

Example 2: Preventing escaping from TRS

63Confidential

•Function - Receiving Calls

Function – Receiving Calls

64Confidential

Speed Dial Name Reference through Network

1234567

Private Network

Panasonic1234567

6. Feature 1. Speed Dialing & Caller ID

1. Main Table

9+1234567Panasonic

If Caller ID is matched to the number in System/Personal Speed Dial, the correspond name can be displayed on LCD. It is effective through Network, too.

Telecom Line

65Confidential

Incoming Call Log for Public Call through Private Network

TDA distinguishes incoming calls from the private network between private call and public call.

PublicNetwork

PrivateNetwork

PBX code952Ext.101

CID:03-1234-5678

CID:06-4444-5555

CID:03-1234-5678

CID:952-101

CID:06-4444-5555

Private Call

Public Call

Public Call

Threshold Value= 9

Threshold value: 0-15 (default:9)

Incoming CallLogging

Call Type Info.

From other PBX

Digits Comparison

With threshold

Public

Private

Private

Don’t Care

Over

Under or equal

Result

Public

Public

Private

TDA V2.0 can send correct call type.TDA V1.0, V1.1 send “Private Call” as call type.

*

Priority condition

10 digits > 9

6 digits =< 9

66Confidential

•Function – Hold/Forward/Transfer

Function – Hold/Forward/Transfer

67Confidential

CLIP when Transfer

CLIP to be sent to CO when transferring (to CO) has following choices.

* This configuration does not apply for Call Forwarding.

CLIP in forwarding is received CID.

Disable (default): send CID of EXTEnable : send CID of Held CO Party

- send CID which is sent in usual of the extension’s making a call

- send CID of held CO party

68Confidential

•Function – Others

Function - Others

69Confidential

Others - 1

System Speed Dial

Station Speed Dial

(Personal Speed Dial)

32digits,

1000 entries/System

32 digits,

10 entries/EXT (01-09)

TDA100

TDA200

TDA100

TDA200

32digits,

1000 ent./System + 1000 ent./Tenant x 8

32 digits,

100 entries/EXT (00-99)

MEC

MEC

Each Tenant has a choice.- to use a list for system

- to use a list for tenant

Original 10 entries aren’t copied to first 10 entries in 100 entries.

- Memory Expansion

70Confidential

Others - 2

- Analog CO Line Monitor Detection of physical line disconnection

- 20 Pauses for 2nd Dial Code

V1.1 = Max. 4 Pauses, V2.0 = Max. 20 Pauses

If CO line is disconnected physically, the CO port become Out of Service Automatically.

Except AL/NE model LCOT card by difference of hardware

71Confidential

Others - 3

- Working Extension for Virtual ExtensionV1.0= SLC16 without phone

V1.1= DLC16 temporary use only

- Dummy Extension of PBX for CO Tel. No.

You can use mobile phone like as extension.

TDA100/200: Max 128 PS or Mobile phone

TDA30: Max 28 PS or Mobile phone

PBX recognize CO Tel. No. as EXT. No.

72Confidential

Others - 4

Time stump in 24h format

Caller ID Modification

Example 1:

Default for US/Canada is "Before Modification". Default for other is "After Modification".

For example, call from 0312345678 through ISDN CO will be print as

312345678 by "Before Modification" mode.

0312345678 by "After Modification" mode.

Example 2:

441633653666(Call from UK)

or 44163365366(Call in US) by "Before Modification" mode

010441633653666(Call from UK)

or 144163365366(Call in US) by "After Modification" mode

- SMDR Enhancement

- After Modification- Before Modification Default of US, Canada

Default of others

- 12H- 24H Default of NE

Default of others

73Confidential

Others - 5

- Outgoing message (OGM) recording duration expansion

V1.1 or before V2.0

Total 8 minutes

Up to 64 messages

Total 8 minutes

Up to 64 messages

Max. One minutefor each message

Max. Eight minutesfor each message

74Confidential

•To Start TDA100/200 V2.0

To Start TDA100/200 V2.0

75Confidential

PC Maintenance Console Compatibility

Automatically

V1.1 is connected.

V1.0 is connected.

Initial Screen

V2.0 is connected.

V1.07V2.0

Automatically

Two versions are installed

into a PC.

76Confidential

PC Maintenance Console Installation - 1

PCC provides two installers.

The Installation order is important.

pcprogv2000R5.exe

pcprogv107cR3.exe

(V2.0)

(V1.07)

Only for TDA V2.0

For TDA V1.1 & V1.0

Result

Possible programming

TDAV1.0 V1.1

TDAV2.0TDA

NoNo Yes

YesYes No

OK !YesYes Yes

No good !YesYes No

You need UNINSTALL V1.07 and V2.0 and install again in correct order.

* You can uninstall both of V1.07 and V2.0 at once in normal uninstall operation.

NoneV1.07

V2.0 None

V1.07 V2.0+

V2.0 V1.07+

1st

install2nd

install

Installation without uninstalling 1st install.

Case1:

Case2:

Case3:

Case4:

77Confidential

PC Maintenance Console Installation – 2

Area Selection Difference

V1.07 V2.0

“Please enter your country code …” “Please select suffix code.”

78Confidential

3. Conversion Complete.

DSYS of V2.0 is saved at local PC

Data Conversion

2. Update DSYS to V2.0 by PC Maintenance Console V2.0

2-1 Open DSYS (V1.1 or V1.0) from PC Maintenance Console V2.0.

2-2 Following dialog appears.

No conversion, opening DSYS as it is.

Going back to initial screen.

Caution : Converting from V1.0 requires PC Maintenance Console V1.07, too.

1-1 “Tool” => “SD Memory Backup”

1-2 “Utility” => “File Transfer PBX (SD Card) to PC”

1. Back up DSYS (V1.0 or V1.1) to PC

79Confidential

Upgrade PBX1. Prepare following files

- PMPR 2.0, DLNG0 2.0, DLNG1 2.0- DSYS 2.0 --- Converted DSYS or New DSYS created by PC Maintenance Console

2. Download above files to PBX

3. Reset PBX by command- V1.0054 or later --- Please select PMPR_SUB, DSYS_SUB, then reset- Before V1.0054 --- Please reset without any care.

Select

Select

4.Connect PC-Soft again and download other files as the dialog box saying.

5.If PC-Soft require reset, reset PBX again, then you can finish upgrading.

80Confidential

KX-TDA0920+ =

Normal SD DKEY-SDFile:

Enhancement by Upgrade SD card - 11. Some features are enabled by Upgrade SD card (KX-TDA0920) .

+ =

- TDA V1.0- TDA V1.1- TDA V2.0 (Normal)

TDA V2.0Enhanced

KX-TDA0920

Upgrade SD

What is an

upgrade SD ?

2. Enhancement procedure

The information in DKEY-SD is different for each SD card.

5-1 “Utility” => “File Transfer PC to PBX (SD Card)”, DSYS will be saved as DSYS_SUB.5-2 Restart from command with following choices. DSYS: Use Replace File

PMPR: Keep Present FileTDA V2.0 Enhanced begins to work.

Backup current DSYS to PCStep2

Convert DSYS to V2.0Step3

Send User’s DSYS to TDAStep5

Make backup of TDA0920 into local PCStep1

Step4 Change SD to TDA0920,then execute initialize reset

YesYesYes

Yes Yes Yes

Yes

Yes Yes

Yes Yes

From V1.0 or V1.1 V2.0 (working) V2.0 (brand new)

81Confidential

Enhancement by Upgrade SD card - 23. Data Reset After Upgrade

- Incoming Call Log

- Outgoing Call Log (including Last Number Redial)

- Message Waiting

- SMDR

- Advice of Charge (AOC) / Pay Tone

- ICD Group monitor log for supervisor

- PT handset/headset volume

- PT SP-PHONE volume

- PT ring volume

- PT display contrast

- Live Call Screening (LCS) On/Off

- Hands-free Answerback status

- Absent Message status of extensions

(Absent Message data itself is no cleared.)

- Fwd/DND status (FWD destinations are not cleared.)

- PBX date and time

- Timed Reminder

- LPR Timed Update time

- Daily test start time

- Extension Lock/Remote Extension Lock

- Extension PIN Lock/Extension PIN Lock counter

- Verified Code PIN Lock/Verified Code PIN Lock counter

- Password Lock counter for Remote System Programming

- PBX Error Log

- ICD Group login status

(All extensions are set to Login by default.)

- ICD Group Ready/Not Ready status

(All extensions are set to Ready by default.)

Log

System

PT/Ext

Status

Group

Status

Others

And

PS registration information will be cleared, too.

82Confidential

Enhancement by Upgrade SD card - 34. How to go back to normal TDA

Prepare SD card of previous version. (Normal V2.0, V1.1 or V1.0)

Step2 Execute initialize reset of TDA

Step4 Execute normal reset of TDA (It’s no need to send DSYS to TDA.)

Step1 Set the slide switch position to “Lock”, then insert to TDA.

* TDA must be turned off, at first.

Step3 Set the slide switch position to “Un-Lock”, then insert to TDA.

* TDA must be turned off, at first.

TDA begins working with previous version.

83Confidential

Thank you very much !Thank you very much !

• Thank you very much !

Confidential 1 KX-TDA200/100 System KX-TDA200/100 System (Ver.2.0) Chapter 6.0 Enhanced Items...

Documents

Transcript of Confidential 1 KX-TDA200/100 System KX-TDA200/100 System (Ver.2.0) Chapter 6.0 Enhanced Items...