Conexis® L1 Manual

The Secure, Keyless

Smart Door Lock

The smarter way to protect your home•

Discover Our Range of Products

ALARMS

CCTV

ACCESSORIES

Yale® Connected

Secure, monitor and control your

home with a range of smart

security devices from Yale.

Whether it’s a Smart Door Lock,

an Alarm or CCTV system, Yale

Smart Living products put you in

control of your home security.

HOME VIEW CAMERAS

SMART DOOR

LOCKS

The smarter way to protect your home•

Introduction

Thank you for choosing the Yale Conexis® L1 Smart Door Lock.

This simple to install product has been designed with the user

in mind. Please read this manual completely before using the

Yale Conexis® L1 Smart Door Lock.

Contents

Installation 4

Unlock With Cards/Tags 17

Yale Lock App 18

Create Mobile Key Account 19

Adding Cards/Tags Via App 20

Unlock With Yale App 21

Locking The Conexis® L1 Smart Door Lock 22

Battery Indicator 23

Pairing With A Third Party Gateway 24

Factory Reset 25

Search for Conexis® L1 Installation

Video on You Tube

For more information on this product

and Yale Smart Living Range visit Consumer Support:

info@yale.co.uk Tel: 01902 364606

The 2 year guarantee for this

2 product is active from the date

of purchase (A copy of this guarantee is available on our website).

Hereby, ASSA ABLOY UK Ltd declares that the Conexis® L1 Smart Door Lock is in compliance with Directive

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

3

ConexisTM L1 Smart Door Lock

INSIDE

Radio Cover

Inside LED

OUTSIDE

Key Card/Tag Reader

Bluetooth Wakeup

Button and LED

Lever Handle Lever Handle

Thumbturn

Backup 9V

Battery Cover contacts

Tools Required

4

Inside The Box

4x AA Alkaline

Fixing Pack A

The smart way to protect your home.

Fixing Pack B Fixing Pack C Fixing Pack D

55mm 70mm 80mm

145mm 160mm 170mm

5

Remove the Current Handle•

4

3

Do not close door until installation

is complete.

1

Please make a note of your current fixing screws. 2 You should have 2 or 3 as below.

Remove the cylinder 2

1

6

Measuring Your Door

Please measure the thickness of the door

and the distance between the centre of the

lock and the inside of the door to select the

correct xing pack and tailbar.

Fixing Pack B Fixing Pack C Fixing Pack D

INSIDE

55mm 70mm 80mm

145mm 160mm 170mm

Door thickness Door thickness Door thickness 44-50mm 58-65mm 70mm

21mm - 26mm

26mm - 31mm Short

31mm - 36mm Tailbar

36mm - 41mm

41mm - 46mm

Long

46mm - 51mm Tailbar

7

Install lock Actuator•

1

2

1 2

Tip: After installing actuator make sure it is not tilted in the door.

Please screw lug into position to line up with previous handle xing screws (see page 6).

8

Fit External Handle•

Lugs can be slid up and down to t current xing holes.

3

x 2

2 1

Slide the lug up or down to align with the holes in the door.

2

1

9

Fit Internal Fixing Plate•

2

1

No longer required

Note 3

Tip: Slightly

removing

the external

handle from

outside the

door can

help line up

2 the xing

screws.

Insert xing screws to line up with

previous handle 1 Do not fully

screws.

tighten.

10

Unit Alignment•

Make sure handle is parallel to door on both sides.

2

1

INSIDE

3

OUTSIDE

Please ensure that

alignment tool is at

against the door

as screws are

tightened.

6

4

5

11

Fitting Internal Handle•

o longer

required

1

Red

2 Red

Make sure arrows are facing up

3 Do not turn

1

thumbturn until

installation is

complete (page 16)

2

Please make sure cable is tucked into allocated slot when fitting handle.

12

Installation Guide

2

1

Loosely tighten

3

Do not turn

thumbturn until

installation is

complete (page 16)

4

2

Make sure handle operates freely once screws are tightened.

1 Check seal!

Then tighten screws

3

4

13

Handing Procedure•

2 1

Alkaline Batteries

Only

1

Hold R Button for 15 sec. “Beep Beep”

2 Push Down

& Release

“Beep Beep”

2 Push Up

& Release

“Beep Beep

Beep ”

Motor should lock & unlock

14

Pairing of Initial Credential•

Initial pairing mode is designed to allow you to pair 1 Card or Tag before you connect

a smartphone to your lock. Further cards or tags can be added through the app once

installation is complete.

1 Press “R” Button to Start

“Beep Beep”

Mode

Learn PURPLE

Success GREEN

Timeout RED

Place card/

tag just below

2 Yale badge

The smart way to protect your home. or

3 “Beep”

3 Press “R”

Button to Finish

“Beep Beep Beep”

INSIDE

OUTSIDE

Please keep this card/tag on you as your backup

credential at all times when leaving the house.

15

Installation Checklist

Before shutting your door in frame, please test

the following things...

A While the door is open, lift the lever handle to lock. Make sure the motor operates smoothly.

B Test to make sure the lever handle cannot be pushed down.

C Push the thumbturn in on the inside handle and turn 180 degrees to unlock the door.

D Push the lever handle down and make sure it returns by itself.

E Lift the lever handle to lock again.

F Tap one of the paired Cards/Tags on the outside handle under the Yale logo. Make sure it unlocks and the lever handle can be pushed down.

Your installation is now complete. If you have issues with any of the above, please contact: Consumer Support: info@yale.co.uk Tel: 01902 364606

16

Unlock With Cards/Tags

1

OUTSIDE

2

Green

The

smart way to

protect your home.

Green

The smart way to protect your home.

Green

Place card/tag just below Yale badge

3

Green

17

Yale Lock App

1. Search on app store ConexisYALE LOCKL1

®

21. Download App

YALE LOCK

LOCK

32. Create Account

LOCK

Login E-mail E-mail

Password Password

Login

Password Reset

Create Account

Send Feedback

LOCK

User Registration First name First name

Last name Last name

E-mail E-mail Password Password Confirm Password Password

Questions What time of the day were you born? (hh:mm) Answer

18

Create Mobile Key

1 YALE Add New Lock

Your key ring is currently empty. A user may send you a key using your account e-mail:

your-name@email.co.uk

Or press ‘Add New Key’ and configure your

own Yale lock.

2 Add New Lock

Name your lock

A lock would typically be named by its location or purpose.

E.g. Front Door

Cancel OK

Q W E R T Y U I O P

A S D F G H J K L

Z X C V B N M

123 space return

3 Press “R” Button to Start

OUTSIDE

4

Purple

te

comple revocation

Key

Blue

INSIDE

Touch Purple light to make it turn blue

6

5

Only one phone can be paired to lock. This phone can then share the key to other users

by tapping key & press manage users.

19

Adding Additional Cards/ Tags Via App•

Lock ‘name’ Add New Lock Lock ‘name’ Add New Lock Cards/Tags Lock Menu

Details

Cards/Tags

Audit

2

Lock Name

Settings

1 Date & Time New Card/Tag 3

Cards/Tags Press the Bluetooth

wakeup button

Cards/Tags 5

Name

Cancel OK

Q W E R T Y U I

O P

A S D F G H J K L

Z X C V B N M 123 space return

4

Blue

Purple

7 Cards/Tags

6

Your Card/Tag ‘name’

The smart way to protect your home.

Green

“Beep Beep” users updated New Card/Tag

Your initial card/tag will appear as user 1 once a card/tag has been added through the app.

20

Unlock With Yale App

Your Smartphone must already have a mobile key for the lock to use this feature. If you’re setting up the lock for the first time please follow instructions on page 19, or the lock owner can send you a key.

1 2 OUTSIDE

LOCK

complete

Keyrevocation

Blue

3 4 90°

Key

revocation

complete

Green Green

Twist the phone 90º and back

up or press activate key button & GoTM to use the mobile key.

21

Locking The Conexis® L1 Smart Door Lock

“Beep beep beep”

Checking

22

Battery Indicator

Low Battery

OUTSIDE

“Beep beep beep Beep beep beep be be be be be”

No Battery

Key

r e

voc ati on compl ete

Green

1

2

Alkaline Batteries

2

Key revoca ti on

compl ete

Green

9V

Backup 9V contacts

1

23

Pairing With A Third Party Gateway

Connecting to a home automation system is a two-way process and may require the compatible

home automation system to be configured to look for a new device. Please consult the manual

that came with the system for more information.

1

2

Insert Connection

Module 3

3 Press “R” 3 times

2

Removing The Lock From A System 1 The lock may need to be removed from a home

automation system before being added to a new system.

To do this, please carry out the following:

1. Put the existing system into ‘Device Exclusion Mode’ 2. Press “R” Button 3 times within 1.5 seconds

24

Factory Reset

1

2

3

5

4 Disconnect inside handle completely. Remove batteries.

Press and hold “R”

1

Insert batteries while pressing button R Hold until “beep”

2 3

Remove batteries and install following installation instructions.

25

Notes 26

Notes

27

THE YALE BRAND, with its unparalleled global reach and range of products, reassures more people in more countries than any other

consumer locking solution.

THE ASSA ABLOY GROUP is the world’s

leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user

needs for security, safety and convenience.

/YaleUK /YaleSecurity /YaleSecurityUK Issue No. 1B

The smarter way to protect your home•