CONCRETE PUMPING RISK MANAGEMENT
Transcript of CONCRETE PUMPING RISK MANAGEMENT
The risks from concrete pumping, like any other risks, are best controlled using a risk manage-ment approach. The objective of risk management is to enable people to systematically assess all the factors involved in delivering and pumping concrete safely.
AUGUST 2021
BE AWARE. BE ALERT.
WHAT IS RISK MANAGEMENT?The approach of ‘risk management’ is to help people make a judgement about the associated risks and put in place appropriate control measures.
The risk management approach involves:
• Identifying plant hazards that pose a risk.
• Assessing the degree of risk created by the plant, environment, and work processes.
• Determining and implementing appropriate control measures.
• Documenting the assessment and any action or work procedure established for the workplace.
• Monitoring and reviewing the effectiveness of the chosen control measures.
• Each company should undertake the above process in alignment with their own risk management policies and procedures.
The Hierarchy of ControlsApply the highest level of control commensurate with the risk. Lower
level controls may be used in the interim while long-term controls are implemented.
HIERARCHY OF CONTROLOnce risks have been identified they must be controlled to prevent harm to workers and bystanders. Risks can be controlled by selecting one of the following mechanisms to reduce or eliminate risk:
• Eliminate (removal of the risk)
• Substitute (replacing the risk with something that does not produce the same risk)
• Engineering controls (isolate people from the risk
• Administrative controls (procedures, training, signage)
• Personal protective equipment (eyes, ears and feet)
CONCRETE PUMPING RISK MANAGEMENT 1
RISKS ASSOCIATED WITH MANAGING CONCRETE PUMPINGThe risks associated with managing concrete pumping are many and varied. It may be useful to list risks in terms of their originating hazard. Risk may originate from:
PLANT AND EQUIPMENT PROXIMITY OF PLANT AND EQUIPMENT TO
Concrete Placement Booms Traffic
Pump Gauges Public
Pipes Powerlines
Pipe Clamps and Safety Pins Trenches
Anchor Brackets Ground Stability
Pipeline Failure Outriggers
Delivery Hose Other Pumps and Concrete Trucks
Receiving Hopper Workers
Outriggers Pump Operator
Concrete Truck Drivers
TASKS BY-PRODUCTS
Pump and Boom Operation Fumes
Concrete Pouring Noise
Line Cleaning Manual Handling
Pump Cleaning Cement
Road Travel
Reversing Trucks
Operating Other Plant
AUGUST 2021
DISCLAIMERConcrete NZ has developed this alert in the interests of promoting safety awareness. It is not, however, a comprehensive safety publication. Various health and safety (H&S) laws, regulations and standards may apply to the hazard, procedure or matter identified in this publication. Concrete NZ has not conducted a review of applicable H&S laws and following this publication does not ensure your compliance with them. It is your responsibility to be aware of and to comply with all applicable H&S Laws. This publication is not a substitute for proper professional advice.
CONCRETE PUMPING RISK MANAGEMENT 1