Concrete Electric Pole Factory Design
of 4
Transcript of Concrete Electric Pole Factory Design
-
8/13/2019 Concrete Electric Pole Factory Design
1/4
CYRUS Engineering Suite H187 Ikota Shopping Complex V.G.C Ajah Lagos
Tel.: 08029308809.07036438781; email: [email protected]
Concrete Electric Pole Factory Design
Project Briefing
Laying out a factory involves deciding where to put all the facilities, machines,
equipment and staff in the production operation.
Layout determines the way in which materials and other inputs flow through the
operation.
The following will be required as the necessary pre-construction engineering
services:
Subsoil investigationto determine nature of underline strata and bearing
capacity for foundation analysis and design.
Architectural designrequired for space planning to determine work
centers for production operation.
Structural designnecessary for determining member sizing and
construction specification.
Electrical and mechanical
required for power supply and plumbing.
Bill of Quantitiesto determine the project cost.
-
8/13/2019 Concrete Electric Pole Factory Design
2/4
CYRUS Engineering Suite H187 Ikota Shopping Complex V.G.C Ajah Lagos
Tel.: 08029308809.07036438781; email: [email protected]
Type of Production
Jobbing operation; characterize by wide variety of products and low
volume.
Batch operation; characterize by medium variety and medium
volume.
Continuous operation; characterize by low variety and high volume.
The proposed concrete pole production factory is intended to produce four
different concrete poles at 150 pieces per day; therefore it can be classed as a
continuous type operation.
Basic Factory Layout Types
Process Layout
Cell Layout
Product Layout
Since we are primarily concerned with a continuous operation in the
concrete pole production we shall be adopting a product layout for the
proposed factory.
-
8/13/2019 Concrete Electric Pole Factory Design
3/4
CYRUS Engineering Suite H187 Ikota Shopping Complex V.G.C Ajah Lagos
Tel.: 08029308809.07036438781; email: [email protected]
Product Layout
In product layout design the machines and equipment are located so that
each product follows a pre-arranged route through a series of processes.
The product flow along a line of processes that is clear and predictable.
Product layout have high fixed cost to set up the manufacturing lines and
low variable costs for producing large volumes of the same product.
Layout Design
The layout design will determine:
Work centers of the operation i.e. the exact location of the facilities,
equipment and staff.
Space to be devoted to each work centers
Task to be undertaken by each work center.
-
8/13/2019 Concrete Electric Pole Factory Design
4/4
CYRUS Engineering Suite H187 Ikota Shopping Complex V.G.C Ajah Lagos
Tel.: 08029308809.07036438781; email: [email protected]
Project Engineering Design Billing
N
Subsoil investigation -------------------------- 200,000/plot
Architectural design --------------------------- 250,000
Structural design ------------------------------- 300,000
Electrical and Mechanical design ---------- 100,000
Bill of quantities -------------------------------- 70,000
