Concepts in Qlik Sense
Transcript of Concepts in Qlik Sense
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 1/88
Concepts in Qlik Sense
Qlik® Sense
2.0.1
Copyright © 1993-2015 QlikTech International AB. All rights reserved.
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 2/88
Copyright © 1993-2015 QlikTech International AB. All rights reserved.
Qlik®, QlikTech®, Qlik® Sense, QlikView®, Sense™ and the Qlik logo are trademarks which have been
registered in multiple countries or otherwise used as trademarks by QlikTech International AB. Other
trademarks referenced herein are the trademarks of their respective owners.
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 3/88
Concepts in Qlik Sense - Qlik Sense, 2.0.1 3
1 About this document 9
2 The associative selection model 10
2.1 Selection states 10
The selected state 10The possible state 11
The alternative state 12
The excluded state 13
The selected excluded state 14
3 Apps 16
3.1 Foundation 16
3.2 Structure and visuals 17
3.3 More about apps 17
4 Sheets 18
5 Visualizations 195.1 Bar chart 20
Number of dimensions and measures 20
Scrolling and mini chart 21
Out of range 21
When to use a bar chart 22
Description 22
When to use it 22
Advantages 22
Disadvantages 22
Selections in bar charts 22Click selection 23
Draw selection 23
Lasso selection 23
Range selection 23
Label selection 23
Legend selection 23
5.2 Combo chart 24
Number of dimensions and measures 25
Out of range 25
When to use a combo chart 25
Description 25
When to use it 25
Advantages 25
Disadvantages 26
Selections in combo charts 26
Click selection 26
Draw selection 26
Lasso selection 26
Range selection 26
Label selection 26
Contents
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 4/88
Concepts in Qlik Sense - Qlik Sense, 2.0.1 4
Legend selection 27
5.3 Filter pane 27
Responsive design 27
Full screen view 28Full screen view on a touch device 28
Full screen view on a computer (mouse interaction) 28
When to use a filter pane 29
Description 29
When to use it 29
Advantages 29
Disadvantages 29
Selections in filter panes 29
Making selections in filter pane lists 30
The selections tool 30
5.4 Gauge 31
Default settings for a gauge 31
Number of dimensions and measures 31
When to use a gauge 32
Description 32
When to use it 32
Advantages 32
Disadvantages 32
5.5 KPI 32
Default settings for a KPI visualization 33
Conditional colors and symbols 33Measures and dimensions 33
Link to sheet 33
When to use a KPI 34
Description 34
When to use it 34
Advantages 34
Disadvantages 34
5.6 Line chart 34
Number of measures and dimensions 34
Scrolling and mini chart 35Out of range 35
When to use a line chart 36
Description 36
When to use it 36
Advantages 36
Disadvantages 36
Selections in line charts 37
Range selection 37
Lasso selection 37
Draw selection 37
Contents
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 5/88
Concepts in Qlik Sense - Qlik Sense, 2.0.1 5
Click selection 37
Legend selection 37
Label selection 37
Indirect selection 37
5.7 Map 38
Number of dimensions and measures 39
Zooming and panning 39
Touch device interaction 40
Computer (mouse) interaction 40
When to use a map 40
Description 40
When to use it 40
With a point layer 40
With an area layer 40
Advantages 40
Disadvantages 40
Selections in maps 41
Lasso selection 41
Draw selection 41
Click selection 41
Legend selection 41
5.8 Pie chart 41
Default settings for a pie chart 42
Number of dimensions and measures 42
When to use a pie chart 43Description 43
When to use it 43
Advantages 43
Disadvantages 43
Selections in pie charts 43
Click selection 43
Draw selection 44
Legend selection 44
Lasso selection 44
Label selection 44
5.9 Pivot table 44
Pivoting 46
Measure grouping 47
Diff erent ways of pivoting 47
Pivoting using the properties panel 48
When to use a pivot table 49
Description 49
When to use it 49
Advantages 49
Disadvantages 49
Contents
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 6/88
Concepts in Qlik Sense - Qlik Sense, 2.0.1 6
Selections in pivot tables 49
Selecting dimension fields in the table 50
Selecting dimension list items 51
Global grouping 51
5.10 Scatter plot 54
Number of dimensions and measures 55
Large data sets in scatter plots 55
Zooming and panning 55
Touch device interaction 56
Computer (mouse) interaction 56
When to use a scatter plot 57
Description 57
When to use it 57
Advantages 57
Disadvantages 57
Selections in scatter plots 57
Range selection 58
Lasso selection 58
Draw selection 58
Click selection 58
Legend selection 59
5.11 Table 59
Number of rows and columns 59
Data alignment 59
Sorting 59Column sorting 60
Row sorting 60
Internal sorting 61
Interactive sorting 61
Column picker 61
Totals 62
Search 62
When to use a table 62
Description 62
When to use it 62
Advantages 62
Disadvantages 62
Searching in tables 62
Selections in tables 63
5.12 Text & image 64
When to use a text & image 64
Description 64
When to use it 64
Advantages 64
Disadvantages 64
Contents
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 7/88
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 8/88
Concepts in Qlik Sense - Qlik Sense, 2.0.1 8
14.9 Story 87
14.10 Snapshot 87
14.11 Embedded sheet 87
14.12 Direct Discovery 88
Contents
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 9/88
1 About this document
1 About this documentRead and learn about the key concepts in Qlik Sense. Whether you are new to Qlik Sense or have used
QlikView, the topics in the first part will help you gain a good understanding before you move on to more
advanced concepts and features in the second part.
This document is derived from the online help for Qlik Sense. It is intended for those who want to read parts
of the help offline or print pages easily, and does not include any additional information compared with the
online help.
Please use the online help or the other documents to learn more.
The following documents are available:
l Working with Apps
l Creating Visualizations
l Discovering and Analyzing
l Loading and Modeling Data
l Data Storytelling
l Publishing Apps, Sheets and Stories
l Script Syntax and Chart Functions Guide
l Qlik Sense Desktop
You find these documents and much more at help.qlik.com/sense.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 9
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 10/88
2 The associative selection model
2 The associative selection modelMaking selections is the main interaction method in Qlik Sense. Selections filter out a subset of the data that
is loaded into Qlik Sense. You use selections to focus on something you want to know more about. QlikSense responds by color coding values according to their different states.
You can think of your interaction (selections) as an input for Qlik Sense and the output as the result of Qlik
Sense evaluating the selections and displaying the color codes on data values.
l The input state: the selection that you have made – whether the field value is selected or not.
l The output state: whether the field value is possible or not, given the logical inference of the selection.
2.1 Selection states
When you make selections, the colors of the values change accordingly. Color-coding is used in filter panes,selections list items, and the selections tool, with the characteristic Qlik Sense colors green, white, and gray.
The colors bring you information about which field values are selected, alternative, possible and excluded,
respectively.
The following table lists which colors are used for the different states.
Selected Green, with a check mark as a selection indicator
Possible White
Alternative Light gray
Excluded Dark gray
Selected excluded Dark gray with a check mark as a selection indicator
The selected state
When you select one or more values in a filter pane and the values turn green, they are in the selected state.
In the following image, the value 1910s has been selected. The selection filters out a subset of the data that
is loaded, and the filter panes Decade and Year are updated according to the selection.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 10
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 11/88
2 The associative selection model
The filter panes have four states altogether. Apart from the selected state (green), there are possible values
(white), light gray values (alternative), and dark gray values (excluded). These states are explained in the
following sections.
The possible state
In the Year filter pane, the years 1914 up to 1919 are white (possible), because these values are all years
from the 1910s, the selected value in Decade. All possible values are 'associated' with the value 1910 . You
could refine your selection by selecting one or more of the possible values.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 11
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 12/88
2 The associative selection model
In the following image, such a refinement has been made. The value 1918 has been selected in the Year
filter pane.
With selections in two filter panes, the possible values are only those that are associated both with 1910s and
1918 . There is a logical AND condition between selections from different filter panes. A possible value must
then be associated both with 1910s and 1918 .
In the Year filter pane, there are no longer any values in the state possible, because none of the values are
associated with both 1910s and 1918 .
The alternative state
In the Decade filter pane, the value 1910s has been selected, and all the other fields in the filter panes have
a certain state, depending on their relationship to the selected value.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 12
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 13/88
2 The associative selection model
All the other values in the filter pane Decade are light gray, meaning that they are alternative values. The
alternative state is used for values that would have been possible if a selection had not already been made in
that field. Before 1910s was selected, all the values in the filter paneDecade were possible values.
Logically, the alternative values are excluded, but they are only excluded by a single selection (of one or more
values), in the same filter pane. If you would clear the selection of 1910s in Decade, all the values would
have the state possible.
Even if a value is alternative, you can still select it, but that means that you are, partly, making a new
selection rather than refining your original selection. What is useful with alternative values is that you know
that there are alternatives available for the same set of selections. If you have a list of sales persons, the
alternative values constitute sales persons that may be able to help or replace the selected person.
The excluded state
When a selection is made, values in other filter panes may automatically be excluded, because they are not
associated. In the following image, 1910s has been selected, and as a consequence the values1920 , 1921,
and 1922 have been excluded. This is an obvious exclusion, because the years 1920 , 1921, and 1922 are not
part of the 1910s. The other values in Decade are alternative, that is, they are excluded but you can still
select them and thereby expand the selection. If you were to select 1920s the value would turn green and
have the state selected.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 13
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 14/88
2 The associative selection model
But if you select one of the possible values in the filter pane Year , all the values in Decade that were
alternative become excluded instead. When only 1910s was selected they were alternative, but with
selections in two filter panes, values that do not match the condition 1910s AND1918 are excluded.
The values that are alternative in Year are only excluded by the selection 1918 . They are all associated with
the value 1910s and had the state possible until 1918 was selected.
The selected excluded state
When you make selections in more than one filter pane, you might run into a fifth state: selected excluded.
As mentioned previously, t here are two different states for each field value:
Concepts in Qlik Sense - Qlik Sense, 2.0.1 14
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 15/88
2 The associative selection model
l The input state: the selection that you have made – whether the field value is selected or not.
l The output state: whether the field value is possible or not, given the logical inference of the selection.
A value enters the selected excluded state because the value was first selected, and then excluded by a
selection in another field.
For the selected excluded state, the check mark is an indicator that the value was first selected and then
excluded, in contrast to excluded values that have never been selected. A dark gray field with a check mark
indicates that the value was previously a selected value, but a new selection has then rendered it selected
excluded.
Example:
In the following image, the first selection was of the values 1910s and 1920s. The values 1910s and 1920s
were both selected (green) and all the values in the filter pane Year were white (possible), since they are all
years from the 1910s or 1920s and therefore logically possible values after the first selection. The secondselection is of the years 1914, 1915 , and 1916 . Now, 1920s is no longer a part of the active selection, since
the second selection logically excludes 1920s. However, 1920s is still a selected value and therefore it makes
sense to denote it as a value that is selected excluded. It was originally selected, but a later selection
excluded it. The check mark distinguishes it from the excluded values that have never been selected.
The dark gray value with a check mark is selected excluded.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 15
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 16/88
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 17/88
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 18/88
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 19/88
5 Visualizations
5 VisualizationsVisualizations are used to present the data that is loaded into the app. The selections you make in the app
are reflected in all associated visualizations on all sheets.
Qlik Sense includes charts that you use to create visualizations. You can convert from one visualization type
to another by dragging a new chart to a visualization on a sheet.
! Bar chart The bar chart displays a bar for each dimension value. The bar length
corresponds to its numerical measure value.
‚ Combo chart The combo chart combines bars and lines in the same chart. The bars and lines
have different axes to enable comparing percentages and sums.
. Filter pane The filter pane allows you to control what data that is shown in the visualizations
on a sheet. A filter pane can filter the data of several dimensions at once.
) Gauge The gauge is used to display the value of a single measure, lacking dimensions.
1 KPI The KPI is used to present central performance figures.
% Line chart The line chart displays data lines between values. Line charts are often used to
visualize a trend in data over intervals of time.
, Map The map is used to combine geospatial data and measure values, such as the
sales for a region or a store.
& Pie chart The pie chart shows the relation between a single dimension and a single
measure.
( Pivot table The pivot table presents dimensions and measures as rows and columns of a
table. The pivot table allows you to analyze data in multiple dimensions at a
time. The data in a pivot table may be grouped based on a combination of the
dimensions, and partial sums can be shown.
+ Scatter plot The scatter plot presents values from two measures. This is useful when you
want to show data where each instance has two numbers, for example, country
(population and population growth). An optional third measure can be used and
is then reflected in the size of the bubbles. When showing large data sets colors
will be used instead of bubble size to represent the measure size.
' Table The table displays values in record form, so that each row of the table contains
fields calculated using measures. Typically, a table includes one dimension and
multiple measures.
/ Text & image You can use the text & image visualization to add text, images, measures and
links to a sheet.
» Treemap The treemap shows hierarchical data. A treemap can show a large number of
values simultaneously within a limited space.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 19
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 20/88
5 Visualizations
5.1 Bar chart
The bar chart is suitable for comparing multiple values. The dimension axis shows the category items that are
compared, and the measure axis shows the value for each category item. In the image, the dimension values
are different regions: Nordic, USA, Japan, UK, Spain, and Germany. Each region represents a dimensionvalue, and has a corresponding bar. The bar height corresponds to the measure value (sales) for the different
regions.
You can make more complex comparisons of data by using grouped or stacked bars. With grouped bars, you
can easily compare two or more items in the same categorical group. Stacked bars combine bars of different
groups on top of each other and the total height of the resulting bar represents the combined result.
The bar chart can be displayed horizontally or vertically.
Number of dimensions and measures
In a bar chart you need at least one dimension and one measure. The following table shows the maximum
limits.
When using Max limit
1 dimension 15 measures
2 dimensions 1 measure
1 measure 2 dimensions
2 -15 measures 1 dimension
Concepts in Qlik Sense - Qlik Sense, 2.0.1 20
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 21/88
5 Visualizations
Scrolling and mini chart
When the number of dimension values exceeds the width of the visualization, a mini chart with a scroll bar is
displayed. You can scroll by using the scroll bar in the mini chart, or, depending on your device, by using the
scroll wheel or by swiping with two fingers. When a large number of values are used, the mini chart no longer displays all the values. Instead, a condensed version of the mini chart (with the items in gray) displays an
overview of the values, but the very low and the very high values are still visible.
Bar chart with mini chart
Out of range
In the properties panel, under Appearance, you can set a limit for the measure axis range. Without a limit,
the range is automatically set to include the highest positive and lowest negative value, but if you set a limit
you may have values that exceed that limit. A bar that exceeds the limit will be cut diagonally to show that it is
out of range.
When a bar cannot be displayed, due to the range limits, an arrow indicates the direction of the value.
When a reference line is out of range, an arrow is displayed together with the number of reference lines that
are out of range.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 21
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 22/88
5 Visualizations
When to use a bar chart
Sales per region and year visualized in a bar chart with horizontal, grouped bars and a bar chart with vertical,
stacked bars
Description
You can include two dimensions and one measure, or one dimension and multiple measures in a bar chart.
Each bar corresponds to a dimension, and the values of the measures determine the height/length of the
bars.
When to use it
Grouping and stacking bars makes it easy to visualize grouped data. The bar chart is also useful when you
want to compare values side by side, for example sales compared to forecast for different years, and when
the measures (in this case sales and forecast) are calculated using the same unit.
Advantages
The bar chart is easy to read and understand. You get a good overview of values when using bar charts.
Disadvantages
The bar chart does not work so well with many dimension values due to the limitation of the axis length. If the
dimensions do not fit, you can scroll using the scroll bar, but then you might not get the full picture.
Selections in bar charts
When you analyze your data, you have different ways of making selections. In a bar chart you can either use
click selection, draw selection, legend selection, lasso selection, range selection, or label selection. To
confirm a selection, clickm or click outside the visualization. You can also press Enter. To cancel, clickEor press Esc.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 22
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 23/88
5 Visualizations
Click selection
You can select bars by clicking them, one at a time. To deselect a bar, click it.
Draw selection
You can draw one or more lines in the chart to select bars. All bars that are touched by a line are selected, all
other bars are dimmed. To deselect a bar, click it.When you want to make a draw selection, you must first
click inside the visualization and turn on lasso selection by clicking— at the top of the visualization. On a
computer, you can also press Shift and make the selection.
Lasso selection
In lasso selection, you can draw a freehand shape to enclose an area. You must close the area by returning tothe starting point of your selection.When you want to make a draw selection, you must first click inside the
visualization and turn on lasso selection by clicking— at the top of the visualization. On a computer, you can
also press Shift and make the selection.
Range selection
In range selection, you can make selections either on the x-axis or the y-axis, one at a time. Select a starting
point along the axis, just outside the chart area, and drag to make a selection. As soon as you start dragging,
a starting point line is displayed, as well as an end point line that shows the selection. You can adjust your
selection by dragging the lines, the value boxes, or the green selection area. For an axis showing measure
values, you are also able to click on the range bubble to enter a specific numeric value.
Label selection
You can click the dimension labels to make selections. When dimensions are grouped or stacked, the whole
group or stack is selected.
Legend selection
There are two legend types: box legend, with one legend item per dimension value, and range legend, with a
gradient scale, where all measure values are represented. In the box legend, you select and deselect the
items one at a time by clicking them. In the range legend, you drag from a starting point to an end point to
enclose an area. You cannot deselect an item, but you can change the range.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 23
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 24/88
5 Visualizations
When you have a bar chart with two dimensions and one measure (either grouped or stacked), the selection is
by value and not by group or by stack. This means that only parts of a group or stack are selected.
When you have a bar chart with one dimension and two measures (either grouped or stacked), selections
cannot be made.
5.2 Combo chart
The combo chart is suitable for comparing two sets of measure values that are usually hard to compare
because of the differences in scale. A typical example is when you have a bar chart with sales figures and
want to combine these figures with the margin values (in percent). In a regular bar chart, the bars for sales
would be displayed as usual, but the margin values would be almost invisible because of the very large
difference between the numeric values for sales and margin.
With a combo chart you can combine these values by, for example, using bars for the sales values and a line
for the margin values. By default, the bars have the measure axis on the left and the margin values have a
separate axis to the right. The two measures use the same dimension (month).
If you have yet another measure, for example, gross sales, with values that are roughly in the same range as
the sales values, you can add the third measure as bars and either stack or group the new measure values
with the sales values. With grouped bars, you can easily compare two or more items in the same categorical
group. Stacked bars combine bars of different groups on top of each other and the total height of the resulting
bar represents the combined result.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 24
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 25/88
5 Visualizations
Combo chart with three measures
The combo chart can only be displayed vertically.
Number of dimensions and measuresIn a combo chart, you need at least one dimension and one measure. You can only have one dimension but
up to 15 measures.
Out of range
In the properties panel, under Appearance, you can set a limit for the measure axis range. Without a limit,
the range is automatically set to include the highest positive and lowest negative value, but if you set a limit
you may have values that exceed that limit. A bar that exceeds the limit will be cut diagonally to show that it is
out of range. For a line data point value that is out of range, an arrow indicates the direction of the value.
When to use a combo chart
Sales (blue bars) compared to Cost (red line)
Description
The combo chart combines the features of the bar chart and the line chart. You can use bars and lines to
represent different categorical groups in the same visualization.
When to use it
With the possibility to have different measure scales, one to the left and one to the right, the combo chart is
ideal when you want to present measure values that are normally hard to combine because of the significant
difference in value ranges.
But a combo chart can also be quite useful when comparing values of the same value range. In the image
above, the combo chart only has one measure axis, but the relationship between the two categories sales
and cost is clear.
Advantages
The combo chart is the best choice when combining several measures of different value ranges.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 25
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 26/88
5 Visualizations
Disadvantages
The combo chart only supports one dimension, and can therefore not be used when you need to include two
or more dimensions in the visualization.
Selections in combo charts
When you analyze your data, you have different ways of making selections. In a combo chart, you can use:
click selection, draw selection, lasso selection, range selection, label selection, or legend selection. To
confirm a selection, clickm or click outside the visualization. You can also press Enter. To cancel, clickEor press Esc.
Click selection
You can select bars or data points on lines by clicking them, one at a time. To deselect a bar or data point,
click it.
Draw selection
You can draw one or more lines in the chart to select bars and data points on lines. All bars and data points
that are touched by a line are selected, all other bars and data points are dimmed. To deselect a bar or data
point, click it.
When you want to make a draw selection, you must first click inside the visualization and turn on lasso
selection by clicking— at the top of the visualization. On a computer, you can also press Shift and make the
selection.
Lasso selection
In lasso selection, you can draw a freehand shape to enclose an area. You must close the area by returning to
the starting point of your selection.
When you want to make a draw selection, you must first click inside the visualization and turn on lasso
selection by clicking— at the top of the visualization. On a computer, you can also press Shift and make the
selection.
Range selection
In range selection, you can make selections either on the x-axis or the y-axis, one at a time. Select a starting
point along the axis, just outside the chart area, and drag to make a selection. As soon as you start dragging,
a starting point line is displayed, as well as an end point line that shows the selection. You can adjust your selection by dragging the lines, the value boxes, or the green selection area. For an axis showing measure
values, you are also able to click on the range bubble to enter a specific numeric value.
Label selection
You can click the dimension labels to make selections. When dimensions are grouped or stacked, the whole
group or stack is selected.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 26
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 27/88
5 Visualizations
Legend selection
There are two legend types: box legend, with one legend item per dimension value, and range legend, with a
gradient scale, where all measure values are represented. In the box legend, you select and deselect the
items one at a time by clicking them. In the range legend, you drag from a starting point to an end point to
enclose an area. You cannot deselect an item, but you can change the range.
When you have a combo chart with one dimension and two measures (either grouped or stacked),selections
cannot be made.
5.3 Filter pane
You can add a filter pane to control what data that is shown in the visualizations on a sheet. A filter pane can
filter the data of several dimensions at once. For example, if you have a chart of sales over time, you can use
a filter pane to limit the data in the chart to only show sales from a selected time period, from certain product
categories, and from a certain region.
When a dimension is added, it is placed to the right of the previous dimensions, or below, depending on the
available space. As long as there is space enough, the dimensions are displayed as expanded lists. If there is
not enough space, the dimensions that were added first are turned into filter panes.
Responsive design
The filter pane has a responsive design and renders as many dimensions as possible. When space is limited,
this could involve reducing the size of each dimension so that all dimensions are displayed.
Example:
The following image shows a filter pane while it is being edited. Only three out of five dimensions are
displayed. The other dimensions are replaced by a button with an ellipsis (...), indicating that there are more
dimensions that are not displayed. You can click the button to open the filter pane in full screen view.
Five dimensions as displayed when editing the filter pane
Concepts in Qlik Sense - Qlik Sense, 2.0.1 27
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 28/88
5 Visualizations
When you have finished editing the filter pane and enter analysis mode, you will see the filter pane with all
the dimensions displayed. If all items cannot be shown due to lack of space, the ellipsis box is displayed to
indicate that there are more dimensions.
Five dimensions as displayed when analyzing data
Full screen view
In full screen view, the filter pane is maximized and displays as many dimensions as possible expanded.
When not all dimensions can be displayed expanded, the priority order is that the most recently added
dimensions are expanded to the right. You can change the priority order in the properties panel, under
Dimensions. Drag the dimensions to change the order.
Full screen view on a touch device
Do the following:
1. Long-touch the visualization.
The touch item menu is displayed.
2. Taps.
The visualization is displayed in full screen.
Close the full screen view and return to the sheet view by clickingE.
Full screen view on a computer (mouse interaction)
By default the full screen icon is hidden.
Do the following:
1. Hover over the visualization that you want to expand.
2. Clicks at the top right of the visualization.
The visualization is displayed in full screen.
Close the full screen view and return to the sheet view by clickingE.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 28
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 29/88
5 Visualizations
When to use a filter pane
Selections have been made in the dimensions Year, Quarter, and Week
Description
The filter pane helps you control what data that is reflected in the visualizations on a sheet.
When to use it
With filter panes, you can easily make several selections to define your data set exactly like you want it. With
your well-defined data set, you can explore data of particular interest.
By using the selection menu options in the filter panes (select possible, select alternative, and selectexcluded), you can make adjustments to the data set and compare the results with the previous selection.
Advantages
Filter panes are good for making selections and defining data sets. But they also show the relationship
between different values, the associations. The green, white, and gray colors reflect the data associations
that exist - and that do not exist. And by analyzing those associations, you can make new discoveries, for
example, that a sales representative has too many customers, or that a region lacks a sales representative.
Disadvantages
When the dimensions contain a very large amount of values, it may be harder to manage the data.
Selections in filter panes
During analysis you click a compressed filter pane dimension to open a selection list.
When you make a selection, it is reflected in the small bars at the bottom of each filter pane dimension. Four
states can be displayed in the bars: selected (green), possible (white), alternative (light gray), and excluded
(dark gray). Locked values are indicated by a lock icon. The details of the selections are displayed in the
selections bar, above the sheet. You can click an item to see the details and change your selection.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 29
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 30/88
5 Visualizations
Fields are filtered out from each dimension to be shown in the visualizations on the sheet.
Making selections in filter pane lists
When there is space enough in a filter pane, the dimension values are displayed in a list. In lists, you can click
to select a single value or draw to select several values. On a touch device, you can two-finger-tap in the list
to select a range of values.
Filter pane with expanded list
The selections tool
The selections tool offers an option to get an overview of the fields and dimensions in an app. In the
selections tool you can make selections in all the fields and dimensions in the app, regardless of whether they
are used in the app or not.
During analysis, the selections tool is available to the right in the selections bar. Click9 to open the
selections tool.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 30
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 31/88
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 32/88
5 Visualizations
When to use a gauge
Description
The gauge displays the value of a single measure.
When to use it
The gauge is often used to present KPIs, for example, on an executive dashboard, and together with
segmenting and color coding, it is an effective way of illustrating a performance result.
It is important to set relevant max and min values to support the interpretation of the value. You can use a
reference line to provide additional context.
Advantages
A gauge is easy to read and understand and gives an instant indication of the performance within an area.
Disadvantages
The gauge is quite space-demanding in relation to the single value it visualizes.
Although visually compelling, the gauge is not always the best choice for presenting a single measure value.
Problems when deciding the max and min values can indicate that some other visualization should be used.
If you only want to show a performance value, without a gauge, consider using a KPI instead.
5.5 KPI
The KPI visualization can show one or two measure values, and is used to track performance.
A KPI visualization with two measure values, using condi tional colors and symbols
Concepts in Qlik Sense - Qlik Sense, 2.0.1 32
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 33/88
5 Visualizations
Default settings for a KPI visualization
The following settings are used by default in a KPI visualization:
l Centered alignment.
l Black text color.
l Medium font size.
l No titles.
l Measure label displayed.
l Conditional colors and symbols are turned off.
l No link to sheet.
Conditional colors and symbols
When you use conditional colors for your KPI visualization, you have the option to use symbols to be
displayed next to your measure value. Additionally, you can use the following options:
l Set range limits.
l Add limits to create subsections with different colors to indicate performance, for example, good
(green), below expectations (yellow), or critical (red).
l Add symbols to the values.
l Use gradient coloring between color sections.
You can use expressions to set the limits. All these settings are done in the properties panel that is displayed
on the right-hand side of the window when editing a sheet.
Measures and dimensions
In a KPI visualization, you can have one or two measures and no dimensions.
You can add a second measure value either by dragging it from Fields or Master items in the assets panel,
or by clicking Add measure in the properties panel. With two measures, the second value automatically
becomes a complementary value and is shown with a smaller font size. You can easily switch their order by
dragging the measures in the properties panel under Measures.
Link to sheet
You can link from the KPI visualization to a sheet in the app. When making data analysis and clicking thevisualization, you can click a second time to go to a predefined sheet. The sheet is opened in a new tab.
When hovering over ], the name of the sheet is displayed. The icon is only displayed when Show title is
selected, under Presentation.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 33
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 34/88
5 Visualizations
When to use a KPI
Description
Key performance indicators (KPIs) are used to evaluate the performance in a company or an organization.The KPIs show to what extent a number of goals have been reached. Different organizations have different
goals, and it is important that the goals are well defined so that they are valid and reliable.
When to use it
Use KPIs to get an overview of performance values that are central to an organization. Use color coding and
symbols to indicate how the figures relate to the expected results.
Advantages
KPIs give a quick understanding of the performance within an area.
Disadvantages
The KPI is somewhat limited when it comes to graphical components. You can use symbols to help illustrate
the performance, but if you want a more conspicuous component, consider using a gauge.
5.6 Line chart
The line chart is used to show trends over time. The dimension is always on the x-axis, and the measures are
always on the y-axis. The orientation cannot be changed to vertical.
Number of measures and dimensions
In a line chart you need at least one dimension and one measure. The following table shows the maximum
limits. When using more than three measures the chart may be difficult to interpret.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 34
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 35/88
5 Visualizations
When using Max limit
1 dimension 15 measures
2 dimensions 1 measure
1 measure 2 dimensions
2 -15 measures 1 dimension
Scrolling and mini chart
When the number of dimension values exceeds the width of the visualization, a mini chart with a scroll bar is
displayed. You can scroll by using the scroll bar in the mini chart, or, depending on your device, by using the
scroll wheel or by swiping with two fingers. When a large number of values are used, the mini chart no longer
displays all the values. Instead, a condensed version of the mini chart (with the items in gray) displays an
overview of the values, but the very low and the very high values are still visible.
Line chart with mini chart
Out of range
In the properties panel, under Appearance, you can set a limit for the measure axis range. Without a limit,
the range is automatically set to include the highest positive and lowest negative value, but if you set a limit
you may have values that exceed that limit. When a data point value cannot be displayed, due to the range
limits, an arrow indicates the direction of the value.
When a reference line is out of range, an arrow is displayed together with the number of reference lines that
are out of range.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 35
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 36/88
5 Visualizations
When to use a line chart
Line chart that shows trends for the measures sales and margin on a monthly basis
Description
You can include one dimension and several measures in a line chart.
Data can be presented in different ways in a line chart: as lines, as an area, or as a stacked area, when you
have more than one measure.
When to use it
The line chart is primarily suitable when you want to visualize trends and movements over time, where the
dimension values are evenly spaced, such as months, quarters, or fiscal years.
Your data set must consist of at least two data points to draw a line. A data set with a single value is
displayed as a point.
If, you have a data set where data is missing for a certain month, you have the following options for showing
the missing values:
l As gaps
l As connections
l As zeros
When a month is not present at all in the data source, it is also excluded from the presentation.
Advantages
The line chart is easy to understand and gives an instant perception of trends.
Disadvantages
Using more than a few lines in a line chart makes the line chart cluttered and hard to interpret. For this
reason, avoid using more than two or three measures.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 36
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 37/88
5 Visualizations
Selections in line charts
When you analyze your data, you have different ways of making selections. In a line chart you can either use
range selection, lasso selection, draw selection, click selection, legend selection, label selection, or indirect
selection. To confirm a selection, clickm or click outside the visualization. You can also press Enter. Tocancel, clickE or press Esc.
Range selection
In range selection, you can make selections either on the x-axis or the y-axis, one at a time. Select a starting
point along the axis, just outside the chart area, and drag to make a selection. As soon as you start dragging,
a starting point line is displayed, as well as an end point line that shows the selection. You can adjust your
selection by dragging the lines, the value boxes, or the green selection area. For an axis showing measure
values, you are also able to click on the range bubble to enter a specific numeric value.
Lasso selection
In lasso selection, you can draw a freehand shape to enclose an area. You must close the area by returning to
the starting point of your selection.When you want to make a draw selection, you must first click inside the
visualization and turn on lasso selection by clicking— at the top of the visualization. On a computer, you can
also press Shift and make the selection.
Draw selection
In draw selection, you can make a selection by drawing one or more lines in the chart. All data points that are
touched by a line are selected. To deselect a data point, click it. When you want to make a draw selection,
you must first click inside the visualization and turn on lasso selection by clicking— at the top of the
visualization. On a computer, you can also press Shift and make the selection.
Click selection
In click selection, you can make a selection by clicking the data points, one at a time. To deselect a data
point, click it.
Legend selection
In the box legend, you select and deselect the items one at a time by clicking them.
Label selection
You can click the dimension labels to make selections. When dimensions are grouped or stacked, the whole
group or stack is selected.
Indirect selection
When you have a line chart with two dimensions and make a selection of two measure values for two different
dimension values, as illustrated in the image, Qlik Sense makes indirect selections of the corresponding
dimension values, so that the selection becomes the same as you would achieve when using range selection
for the area. The data values selected by Qlik Sense are unfilled.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 37
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 38/88
5 Visualizations
Indirect selection of the values that are unfilled
5.7 Map
Maps can be used for a wide variety of purposes. A common use in business intelligence is to plot sales data
per region or per store.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 38
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 39/88
5 Visualizations
You can create a map by using either a point layer or an area layer. A point layer map is typically used to mark
places of interest, such as airports or office locations, using longitude and latitude coordinates, while an area
map can be used to display geographical areas, such as countries. If you use a point layer, you also need a
background map to provide the context for the points, otherwise you will only have a collection of points on anempty background. By default, a Mapbox background map is added to a point layer. If you want to, you can
use a map from a different provider.
You can add a measure value or an expression to the dimension values, and use the size of the points or
color by measure to reflect the size of the measure. If you use an area layer, you often do not need a
background map, but there is support for complementing an area layer with a background.
The background map is of the type “slippy map” in which you can zoom, pan around, and make selections.
≤ http://wiki.openstreetmap.org/wiki/Slippy_Map
Number of dimensions and measures
You can only use a single dimension type: point or area. You can create an expression in the dimension. If
you add a measure from the master items to the map, the measure is added in the expression box under
Data > Layers > <layer type> in the properties panel.
Zooming and panning
A map has options for zooming and panning, which work differently depending on the type of device you are
using. The interaction differs depending on what device you are using.
When you re-size your browser window, the map scales accordingly.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 39
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 40/88
5 Visualizations
Touch device interaction
On a touch device, you pinch apart to zoom and swipe to pan.
You can reset the zoom by tappingü, which appears in the top-right corner when you start zooming.
Computer (mouse) interaction
With a computer, you use the mouse to zoom and pan in the visualization. Use the scroll wheel to zoom in
and out. You pan by dragging.
You can also use the navigation tool for zooming and panning. Right-click in the map and select Navigation
to open the tool.
You reset the zoom by clicking the scroll wheel or by clickingü in the navigation tool.
When to use a map
Description
You can use an area layer or a point layer when you create a map. Each point or sub-area corresponds to a
dimension value.
When to use it
You can use a map to show the geographical distribution of offices, stores, and other sites of business
interest. You can visualize not only locations but also sales values and other measures and display the value
differences by bubble size or color.
With a point layer In a simple implementation of a map with a point layer, all bubbles look the same. But by using an expression
or a measure, you can let the bubble size reflect the value. In the properties panel, add an expression to the
point layer, or drag a measure from Master items in the assets panel to the visualization.
You can also use coloring by measure or by expression to show differences in values.
With an area layer
With an area layer, each subarea is a dimension value. By using colors, you can differentiate between
measure values. In the properties panel, under Appearance > Colors and legend, switch Colors to
Custom where the optionsBy measureand By expression are available.
Advantages
The map is a versatile visualization that efficiently presents the geographical distribution of key values related
to location or area.
Disadvantages
With a large number of values, it may be hard to get a good overview. Values may be placed on top of each
other and not visible until zoomed in.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 40
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 41/88
5 Visualizations
Selections in maps
When you analyze your data, you have different ways of making selections. In a map, you can either use
lasso selection, draw selection, click selection, or legend selection. To confirm a selection, clickm or click
outside the visualization. You can also press Enter. To cancel, clickE or press Esc.
Lasso selection
In lasso selection, you can draw a freehand shape to enclose an area. You must close the area by returning to
the starting point of your selection.
When you want to make a draw selection, you must first click inside the visualization and turn on lasso
selection by clicking— at the top of the visualization. On a computer, you can also press Shift and make the
selection.
Draw selection
In draw selection, you can make a selection by drawing one or more lines in the visualization. All data points
that are touched by a line are selected, and all other data points are dimmed. To deselect a data point, click
it. When you want to make a draw selection, you must first click inside the visualization and turn on lasso
selection by clicking— at the top of the visualization. On a computer, you can also press Shift and make the
selection.
Click selection
In click selection, you can make a selection by clicking data points, one at a time. To deselect a data point,
click it.
Legend selectionYou can make selections in the legend. There are two legend types: box legend, with one legend item per
dimension value, and range legend, with a gradient scale, where all measure values are represented. In the
box legend, you select and deselect the items one at a time by clicking them. In the range legend, you drag
from a starting point to an end point to enclose an area. You cannot deselect an item, but you can change the
range.
5.8 Pie chart
The pie chart displays the relation between values as well as the relation of a single value to the total. You
can use a pie chart when you have a single data series with only positive values.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 41
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 42/88
5 Visualizations
Sales per region in a pie chart
Default settings for a pie chart
The following settings are used by default in a pie chart:
l The top 10 sectors are presented in descending size order, clockwise.
l Colors are presented by dimension.
l Value labels are presented in percent.
All these settings can be changed in the properties panel.
Number of dimensions and measures
A pie chart is built from one dimension and one measure only.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 42
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 43/88
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 44/88
5 Visualizations
Draw selection
In draw selection you can make a selection by drawing one or more lines in the chart. All sectors that are
touched by a line are selected, all other sectors are dimmed. To deselect a sector, click it. When you want to
make a draw selection, you must first click inside the visualization and turn on lasso selection by clicking—
at the top of the visualization. On a computer, you can also press Shift and make the selection.
Legend selectionThere are two legend types: box legend, with one legend item per dimension value, and range legend, with a
gradient scale, where all measure values are represented. In the box legend, you select and deselect the
items one at a time by clicking them. In the range legend, you drag from a starting point to an end point to
enclose an area. You cannot deselect an item, but you can change the range.
Lasso selection
In lasso selection, you can draw a freehand shape to enclose an area. You must close the area by returning to
the starting point of your selection.When you want to make a draw selection, you must first click inside the
visualization and turn on lasso selection by clicking— at the top of the visualization. On a computer, you can
also press Shift and make the selection.
Label selection
You can click the dimension labels to make selections.
5.9 Pivot table
The pivot table presents dimensions and measures as rows and columns in a table. In a pivot table you can
analyze data by multiple measures and in multiple dimensions at the same time. You can rearrange the
measures and dimensions to get different views of the data. The activity of moving measures and dimensions
interchangeably between rows and columns is known as “pivoting”.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 44
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 45/88
5 Visualizations
Example:
The efficiency of a pivot table can be illustrated by comparing a regular table with a pivot table that has the
same data. In the following table, you have three dimensions: Customer, Product Group, and Item, and two
measures: Quantity and Sales. The table shows the sales of some food products. If you want to rearrangethe data to simplify analysis, the options are somewhat limited. You can change the order of the columns, but
that does not improve the overview. You can also set the sorting order, either in the sorting section in the
properties panel, or by clicking the dimension columns. However, the problem persists. The customers,
product groups, and items are all presented more than once, and it is not possible to get a good summary of
the data.
Here is the same data in a pivot table.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 45
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 46/88
5 Visualizations
As you can see, the pivot table presents the data in a much more condensed way, which simplifies analysis
and comparison. Compared to the regular table, the number or rows has been halved in the pivot table and
the number of columns is three instead of five.
One of the advantages of a pivot table is the interchangeability, that is, the ability to move row items to
columns and column items to rows. This flexibility is very powerful and enables you to rearrange the data and
have several different views of the same data set. Depending on what you want to focus on, you move the
dimensions and measures to bring forward data of interest and hide data that is either too detailed, or
irrelevant for the analysis.
The pivot table shows the dimensions Customer , Product Group, and Item, and the measures Quantity and
Sales. In this view, you have a summary of quantity and sales for each customer. If you want to know which
items and product groups that the customers bought, you need to expand the customer fields by clickingP.
AP icon indicates that a field can be further expanded and present more details, while aQ icon indicates
that the field can be collapsed, to reduce the number of fields and details.
Pivoting
When you want to rearrange your data to get a new view, you drag the items to the new place, either to acolumn or a row. In the following pivot table, the dimension Customer has been dragged to the position after
Product Group and the dimension Item to the position before Product Group. As a consequence, the
dimensions are now sorted by Item, primarily. Focus has shifted from Customer to Item. By expanding the
dimensions you can find out the quantities and sales for each customer, but there is another way to achieve
that goal.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 46
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 47/88
5 Visualizations
By moving the dimension Customer from rows to columns, you retain focus on the dimension Item, but you
also get the distribution of items per customer. The move has made the pivot table more information dense.
Measure grouping
As you may have noticed, Quantity and Sales are not presented as separate measures in the top column
row. Next to the dimension Customer , you find an item called Measures. When you use more than one
measure, the measures are automatically grouped together forming a measure group, Measures, which as a
whole can be added to the rows section or the columns section. The measure group is not editable in the
table. You cannot split the measure item and use one measure as a row and another as a column, nor can
you change the order in which the measures are presented. Changes to the Measures item are made in the
properties panel.
Different ways of pivoting
Essentially, pivoting involves dragging the dimensions and measures from rows to columns and columns to
rows, but you have two options for performing the pivoting.
l In the pivot table (both when editing and when analyzing).
l In the properties panel (only when editing).
Concepts in Qlik Sense - Qlik Sense, 2.0.1 47
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 48/88
5 Visualizations
Pivoting using the properties panel
In the properties panel, you can add measures and dimensions to the pivot table, and also move the
dimensions and measures to rows or columns. When you use more than one measure, the measures are
grouped and a Measures item is created. You can change the internal order of the dimensions and
measures, but when you have more than one measure, it is always the whole measure group that you move.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 48
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 49/88
5 Visualizations
When to use a pivot table
Description
The pivot table presents dimensions and measures as rows and columns of a table. The pivot table allowsyou to analyze data by multiple measures and in multiple dimensions at the same time. The data in a pivot
table may be grouped based on a combination of the dimensions. You can pivot by dragging and dropping
dimensions in the table.
When to use it
The pivot table is particularly useful when you want to include several dimensions or measures in a single
table, and then want to reorganize them to see different subtotals.
Advantages
The pivot table is very powerful when you want to analyze multiple dimensions and measures at once, and
then reorganize them to get a different perspective on your data. Another advantage is that you can expand
the rows you are interested in while keeping the rows in the rest of the table collapsed.
Disadvantages
The pivot table may seem a bit complicated, and does not give insights at a glance.
Selections in pivot tables
In a pivot table, you can make selections either by clicking on dimensions in the table, or by making a
selection in the list that appears when you click a dimension item.
You cannot make selections in measures.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 49
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 50/88
5 Visualizations
Selecting dimension fields in the table
Pivot table with selected dimension fields in green
You can make selections in a pivot table by clicking or drawing in the dimension fields. Measure values
cannot be selected. When you make a selection, it is always the dimension values that you select. You can
only make selections for one dimension at a time.
To deselect a row, click it. To confirm a selection, clickm or click outside the visualization. You can also
press Enter. To cancel, clickE or press Esc. If you confirm, the selection is reflected in all visualizations
associated with the pivot table.
You cannot select dimension values that are NULL. Null values in a table are presented as dashes (-).
Concepts in Qlik Sense - Qlik Sense, 2.0.1 50
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 51/88
5 Visualizations
Selecting dimension list items
Dimension list during selection
The list displays the values from the chosen dimension. You can select fields by clicking or by drawing. All
selected fields are marked green. To deselect a field, click it. To confirm a selection, clickm or click outside
the visualization. You can also press Enter. To cancel, clickE or press Esc. If you confirm, the selection is
reflected in all objects related to the pivot table.
You cannot select dimension values that are null. Null values in a pivot table are presented as dashes (-).
Rows without valid dimension values will not be included in the selection.
Global grouping
With global grouping you use a limited data set, and in that data set, you single out values that you want to
focus on, for example, the best quarters, the top sales persons, or the worst selling products.
You can regard global grouping as a two-step procedure. First you apply a limitation to a data set, and then,
in the resulting list, you apply the same limitation again to the inner dimension (that is, the dimension that is
second in the sorting hierarchy), to only show results for the singled out inner dimension values.
Example:
In the following pivot table, no limitation is applied. The values are sorted on Sales, descending. The list is
long, the values for 2013 are not shown.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 51
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 52/88
5 Visualizations
In the following pivot table, a limitation has been applied to the (inner) dimension Sales Rep Name, so that
only the top five sales representatives for the years 2013 and 2014 are shown.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 52
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 53/88
5 Visualizations
The next step is to select global grouping in the properties panel. The option Global grouping is only
available when you have applied a limitation on the dimension.
When global grouping is selected, the limitation of the top five sales representatives is applied again, but this
time regardless of the dimension Year . The five sales representatives with the highest sales (either in 2013 or
2014) are the only ones that will be presented in the final pivot table. The following image shows the six
highest results for 2014 and 2013. The top four results are from 2014, but the fifth (John Greg) is from 2013.
Because five other sales representatives have higher sales than Brenda Gibson (who was number five in
2014), she is knocked out of the list.
The following image shows the pivot table with global grouping applied. The pivot table only contains the
sales results for the top five sales representatives. Even though Brenda Gibson had a better result in 2014
than John Greg, his result for 2013 qualified him for the top five list.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 53
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 54/88
5 Visualizations
5.10 Scatter plot
The scatter plot presents pairs of values from two or three measures. This is useful when you want to show
data where each instance has two numbers, for example, the relationship between Sales and Quantity per
Customer. In the scatter plot below, a third measure (Cost) is used to generate the bubble size.
Example of a scatter plot
Concepts in Qlik Sense - Qlik Sense, 2.0.1 54
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 55/88
5 Visualizations
Number of dimensions and measures
In a scatter plot you need one dimension and at least two measures. You can have maximum one dimension
and three measures.
Large data sets in scatter plots
If you have a scatter plot with large amounts of data (more than 1000 data points) Qlik Sense uses an
algorithm to create an overview of the data, as shown in the scatter plot below. However, if you zoom or make
selections so that the number of displayed data points is reduced to less than 1000 data points, the data will
be shown as individual bubbles. This switch between compressed view and bubble view is done
automatically. The density of the data points is reflected by color.
Example of a scatter plot with compressed data
Zooming and panning
In a scatter plot, you can zoom and pan around in your data. The interaction differs depending on what device
you are using. If you are zooming in you can see where in the data set you are located by looking at the mini
chart in the bottom right corner. If you zoom in on large data sets you will be able to see the data shown as
boxes with values inside. The values represent the number of points in each box. If you zoom in so that there
are <1000 data points, you will instead see the data points represented by bubbles.
You can change the compression resolution by moving the slider in the top of the visualization.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 55
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 56/88
5 Visualizations
Example of a scatter plot with compressed data
Touch device interaction
On a touch device you pinch to zoom and swipe to pan. Points that are outside the visible range are
visualized as small dots along the axis lines or shown as being outside the selected area in a mini chart.
With a three-finger tap you reset the zoom. You can also reset the zoom by tappingü
, which appears in thetop right corner when you start zooming.
Computer (mouse) interaction
With a computer you use the mouse to zoom and pan in the visualization. Use the scroll wheel to zoom in and
out. The zooming is made on the area where the pointer is. Points that are outside the visible range are
visualized as small dots along the axis lines.
You reset the zoom by clicking the scroll wheel or by clickingü, which appears in the top right corner when
you start zooming. You pan around in the chart by dragging. You also have the option of using the navigation
tool that is available in the shortcut menu. Right-click in the scatter plot and select Navigation to open the
tool.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 56
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 57/88
5 Visualizations
When to use a scatter plot
Scatter plot showing cost and sales per region. The third measure (generating the bubble size) is gross sales.
Description
The scatter plot presents values from different measures over one dimension as a collection of points. In
most charts, you find your dimension on one of the axes, but for a scatter plot, the dimension is represented
by the points in the chart, and the measures are found on each of the two axes. When a third, optional,
measure is used, its value is reflected in the bubble size. If you are analyzing large data sets and view
compressed data, the density of the data points is reflected by color.
When to use it
The scatter plot helps you find potential relationships between values, and to find outliers in data sets. The
scatter plot is useful when you want to show data where each instance has at least two metrics, for example,
average life expectancy and average gross domestic product per capita in different countries.
Advantages
The scatter plot is a great way to visualize the correlation of two or more measures at the same time. The
third measure is an efficient way of differentiating between values and simplifying the identification of, for
example, large countries, large customers, large quantities, and so on.
Disadvantages
The scatter plot may be difficult to understand for an inexperienced user, because it has measure value on
both axes, and the third, optional, measure adds complexity to the interpretation. Make sure a novice can
interpret the scatter plot correctly. Using descriptive labels is a good way to make the visualization easier to
interpret.
Values may be placed on top of each other and are then not visible until you zoom in.
Selections in scatter plots
When you analyze your data, you have different ways of making selections. In a scatter plot you can either
use lasso selection, range selection, draw selection, click selection, or label selection.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 57
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 58/88
5 Visualizations
When you are analyzing large data sets and see the compressed data view, you can only
select data using range selections.
To confirm a selection, clickm or click outside the visualization. You can also press Enter. To cancel, click
E or press Esc.
Range selection
In range selection, you can make selections on the x-axis or the y-axis, or both together. Select a starting
point along the axis, just outside the chart area, and drag to make a selection. As soon as you start dragging,
a starting point line is displayed as well as an end point line that shows the selection. You can adjust your
selection by dragging the lines, the value boxes, or the green selection area.
Lasso selection
In lasso selection, you can draw a freehand shape to enclose an area. You must close the area by returning to
the starting point of your selection.When you want to make a draw selection, you must first click inside the
visualization and turn on lasso selection by clicking— at the top of the visualization. On a computer, you can
also press Shift and make the selection.
Draw selection
In draw selection, you can make a selection by drawing one or more lines in the chart. All data points that are
touched by a line are selected, and all other data points are dimmed. To deselect a data point, click it. When
you want to make a draw selection, you must first click inside the visualization and turn on lasso selection by
clicking— at the top of the visualization. On a computer, you can also press Shift and make the selection.
Click selection
In click selection, you can make a selection by clicking data points, one at a time. To deselect a data point,
click it.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 58
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 59/88
5 Visualizations
Legend selection
There are two legend types: box legend, with one legend item per dimension value, and range legend, with a
gradient scale, where all measure values are represented. In the box legend, you select and deselect the
items one at a time by clicking them. In the range legend, you drag from a starting point to an end point to
enclose an area. You cannot deselect an item, but you can change the range.
5.11 Table
The table shows several fields simultaneously, where the content of each row is logically connected.
Typically, a table consists of one dimension and several measures.
You can use a table when you want to view precise values rather than visualizations of values, and when you
want to compare individual values. A table is particularly useful when drill-down groups are used as adimension.
You only make selections in the dimension columns. All dimension columns have a search icon (F) in the
header.
Number of rows and columns
In a table, you can have millions of rows and virtually any number of columns with dimensions and measures.
But because huge tables are impractical and hard to manage, the limit for what is practical is far less than the
theoretical maximum. I n most cases, it is desirable to see all the columns without scrolling horizontally.
Data alignment
If Text alignment is set to Auto, column data is aligned according to data type: text values are left-aligned
and number values, including date related values, are right-aligned. If you set it to Custom, you can select to
align the data to the left or to the right.
Sorting
You can adjust both the order of the dimensions and measures from left to right (column sorting), and the
sorting priority order of the rows (row sorting). In addition, you also have an internal sorting option.
During analysis, you can also use interactive sorting to change the row sorting.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 59
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 60/88
5 Visualizations
Column sorting
By default, the order in which columns are sorted is set by the order in which dimensions and measures are
added to the table. If you add the measure Sales first, it is presented first (leftmost) in the table. The next
dimension or measure that is added is presented in the second column, and so on. The column sorting order
can be changed in the properties panel, under Columns.
Row sorting
By default, rows are sorted by the first added dimension or measure, numeric values descending, text values
ascending. A small arrow under the column header shows by which column the table is sorted.
You can change the row sorting in the properties panel, under Sorting. Drag the dimensions and measures
to change the sorting priority order. In many cases, sorting is not only affected by the first dimension or
measure in Sorting, but also the following ones.
Example:
In the following screenshot, the rows are first sorted by Customer , then by Month, and then by Product Type.
As you can see, the columns Customer and Month have several rows with the same values ( A-2-Z Solutions
and Month). The rows in Product Type are ordered alphabetically, but only those that were sold in January to
the customer A-2-Z Solutions are displayed.
By changing the sorting order, so that secondary sorting is by Product Type, followed by Month, all Product
Type items sold to the customer A-2-Z Solutions are presented in alphabetical order, whereas only the
months when they were sold are displayed under Month.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 60
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 61/88
5 Visualizations
Internal sorting
Each dimension and measure has a default (Auto) internal sorting order, which can be changed. Under
Sorting, click the item you want to change and click the button to switch to Custom sorting. Changes made
to the internal sorting of an item may not have any effect if the sorting is in conflict with an item with higher
priority.
Interactive sorting
During analysis, you can set which column to sort on by clicking the column header. The first click sorts the
table according to the default sorting of the selected item. A second click reverses the sorting order.
Interactive sorting is session based and is not saved. If you want your changes to the sorting to be persistent,you need to make the changes in the properties panel.
Column picker
When space is limited and not all dimensions and measures can be displayed in a table, the column picker
appears on the right in the table. When you click the column picker, a list is displayed with all dimensions and
measures in the table. You can temporarily change the order of the columns by dragging them in the list, and
you can make selections in all displayed dimensions, as usual.
The order changes that you make in the column picker are not permanent and do not the affect the column
order or the sorting order set in the properties panel.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 61
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 62/88
5 Visualizations
Totals
By default, the totals of numeric values are displayed under the column names. In the properties panel, you
can change this to display the totals at the bottom of a column, or not at all.
Search
The usual search options are available when you want to perform a search in a table.
You can use the following options:
l Text search
l Numeric search
l Expression search
l Fuzzy search
When to use a table
Description
The table displays values in record form, so that each row of the table contains fields calculated using
measures. Often a table consists of a single dimension, for example, customers, and multiple measures,
such as sales, quantity, margin, and invoice figures.
When to use it
Use a table, when you want to view detailed data and precise values rather than visualizations of values.
Tables are good when you want to compare individual values. Drill-down group dimensions are very efficientin tables. Within a limited space, you can drill down to the next level of detail and analyze the updated
measure values.
Advantages
You can filter and sort the table in different ways. Many values can be included in a table, and when you drill
down in a table, you make good use of a limited space of the sheet. A table is excellent when you want to see
exact values rather than trends or patterns.
Disadvantages
If the table contains many values, it is difficult to get an overview of how values are related. It is also hard toidentify an irregularity within the table.
Searching in tables
In a table, you can search the dimension columns, and make selections in the resulting list.
Do the following:
1. ClickF in the dimension column that you want to search in. A selection popup is displayed.
2. Type your search string.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 62
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 63/88
5 Visualizations
While you type, the list is filtered to only display matching items.
3. Make a selection by clicking or drawing.
4. Confirm your selection.
You can confirm the selection of all matching items by pressing Enter.
The new selection is active and reflected in all associated visualizations.
You can remove the search string by clicking E or pressing Esc. The search string is always
removed when you press return/Enter.
Selections in tables
Table with selected fields in green
You can make selections in a table by clicking or drawing in the dimension columns. Measure values cannot
be selected. When you make a selection, it is always the dimension values that you select. You can only
make selections in one column at a time.
To deselect a row, click it. To confirm a selection, clickm or click outside the visualization. You can also
press Enter. To cancel, clickE or press Esc. If you confirm, the selection is reflected in all visualizations
associated with the table.
You cannot select dimension values that are null. Null values in a table are presented as dashes (-). Rows
without valid dimension values will not be included in the selection.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 63
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 64/88
5 Visualizations
5.12 Text & image
The text & image visualization complements other visualizations by offering options to add text, images,
hyperlinks, and measures.
You can format and color the text and align the paragraphs. The background image has sizing and
positioning options. You can also set the responsive behavior for text and images.
When to use a text & image
DescriptionThe text & image visualization is intended for presentation purposes, and does not support selections.
However, the measures in the text & image visualization are updated when selections are made.
When to use it
Use on the first sheet of an app for essential information.
Display a company image, or use a background image together with formatted text and measure values to
present figures in a compelling way.
Link to sites with additional information.
Use the responsive behavior to ensure that the visualization renders well on all devices.
Advantages
The text & image visualization contrasts with the other visualizations. You have many options for making the
text & image visualization stand out next to more regular charts.
Disadvantages
You are limited to a few measure values and rather short texts, otherwise the text & image visualization will
be cluttered.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 64
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 65/88
5 Visualizations
5.13 Treemap
Treemaps display hierarchical data by using nested rectangles, that is, smaller rectangles within a larger
rectangle.
In this image you have several product groups, such as Produce, Canned Products, and Frozen Foods. Each
product group consists of a large rectangle. You can regard the product groups as branches of the tree. When
you select a product group, you drill down to the next level, the product type, for example, Vegetables, Meat,
and Dairy. You can regard the product types as sub-branches of the tree. The branches have leaves. A leaf
node's rectangle has an area proportional to a specified dimension of the data. In this example, the items
Ebony Squash, Bravo Large Canned Shrimp, Red Spade Pimento Loaf, and so on, are the leaves. The leaf nodes are colored to show a separate dimension of the data.
Sorting is automatic according to size. By default, the coloring is by dimension, with 12 colors, but that can be
changed in the properties panel. When you have more than one dimension, you can decide which dimension
to color by. In this example, the coloring is not by dimension, but by expression ( Avg(Margin)), a calculated
measure, and by using this expression, you can see which items have the highest average margin. The darker
the color, the higher the average margin.
If the data set contains negative values, a text message is shown stating that the negative values cannot be
displayed.
Number of dimensions and measures
In a treemap you need at least one dimension and one measure, but to make full use of the treemap it is
preferable to have two or three dimensions. You can only have one measure, but up to 15 dimensions.
However, using more than two or three dimensions is not recommended because the treemap may become
unmanageable.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 65
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 66/88
5 Visualizations
When to use a treemap
Description
Treemaps are used to display hierarchical data. You can drill down in the data, and the theoretical number of
levels is almost limitless. You reach the practical limit before you reach the theoretical limit.
When to use itUse a treemap when space is constrained and you have a large amount of hierarchical data that you need to
get an overview of. Treemaps should primarily be used with values that can be aggregated.
Advantages
Treemaps are economical in that they can be used within a limited space and yet display a large number of
items simultaneously.
When there is a correlation between color and size in the tree structure, you are able to see patterns that
would be difficult to spot in other ways, for example, when a certain color is particularly relevant.
Disadvantages
Treemaps are not good when there is a big difference in the magnitude of the measure values. Nor is a
treemap the right choice when mixing absolute and relative values.
Negative values cannot be displayed in treemaps.
Selections in treemaps
When you analyze your data, you have different ways of making selections. In a treemap you can either use
click selection, draw selection, or lasso selection. To confirm a selection, clickm or click outside the
visualization. You can also press Enter. To cancel, clickE or press Esc.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 66
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 67/88
5 Visualizations
Click selection
You can select treemap branches by clicking them, one at a time. To deselect a branch, click it.
Draw selection
You can draw one or more lines in the treemap to select branches. All branches that are touched by a line are
selected, all others are dimmed. To deselect a branch, click it. When you want to make a draw selection, you
must first click inside the visualization and turn on lasso selection by clicking— at the top of the
visualization. On a computer, you can also press Shift and make the selection.
Lasso selection
In lasso selection, you can draw a lasso freehand to enclose an area. In a treemap you can make lasso
selections, but in most cases it is easier to use draw selections to select more than one branch. When you
want to make a draw selection, you must first click inside the visualization and turn on lasso selection by
clicking— at the top of the visualization. On a computer, you can also press Shift and make the selection.
5.14 Reference lines
A reference line is a line intersecting the chart area from a given point on the measure axis. You can use a
reference line to indicate a certain level of chart data. The reference line is only drawn if it falls within the
current range of the measure axis. You can have several reference lines in the same chart.
Reference lines are available in bar charts, gauges, line charts, and scatter plots.
Bar chart with a reference line at 5M
Reference line expression
You can either set the reference line expression to an absolute numeric value, or enter an arbitrary numeric
expression.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 67
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 68/88
5 Visualizations
5.15 Null values in visualizations
Data is sometimes missing or cannot be calculated, because the fields contain values that are null or not a
number (NaN). In the visualizations, null and NaN values are displayed in different ways, according to the
following table.
Null values in dimensions NaN values in measures
Bar chart – – ( when labels are enabled in the
properties panel, otherwise empty)
Combo chart – A combination of the NaN value for the
bar and the line.
Filter pane No representation N/A
Gauge N/A –
KPI N/A –
Line chart – Empty
Map No representation gray
Pie chart – Empty
Scatter plot – Empty
Table – –
Text & image N/A –
Treemap – Empty
Concepts in Qlik Sense - Qlik Sense, 2.0.1 68
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 69/88
6 Dimensions
6 DimensionsDimensions determine how the data in a visualization is grouped - for example total sales per country or
number of products per supplier. You typically find a dimension as the slices in a pie chart or on the x-axis of abar chart with vertical bars.
Dimensions are created from fields in the data model tables.
Example:
Product Type isa field inthe Product table that is loaded into the app. The values of this field are the
different types that products are grouped into.
You can, for example, create a bar chart to visualize the cost of each type, by adding the Product Type
dimension to the chart. To complete the visualization, you must add a measure (in this case Cost), which is
grouped by the Product Type dimension.
6.1 Field groups as dimensions
One main difference between Qlik Sense and many other database viewers and online analytical processing
tools (OLAP systems), is that in Qlik Sense, you do not need to predefine any hierarchies in the input data.
The unique internal logic of Qlik Sense gives you the complete freedom to access any field as a full
dimension in any order you like.
For most purposes, the built-in functionality is fully satisfactory, but in some situations, a predefined hierarchy
can help you to display data more efficiently. In Qlik Sense, you can achieve this by defining hierarchic groups
of fields as drill-down dimensions.
Any fields or calculated dimensions can be grouped together.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 69
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 70/88
6 Dimensions
6.2 Drill-down groups
When several fields form a natural hierarchy, it can make sense to create a drill-down group.
Example 1:
Organization: Company, Department, Employee
Example 2:
Geography: Continent, Country, State, City
When you use a drill-down group as a dimension in a chart, the chart uses the first field in the group's list of
fields that has more than one possible value. If the currently made selections cause the field to have only one
possible value, the next field in the list is used instead, provided that it has more than one possible value. If
no field in the list has more than one possible value, the last field is used anyway.
In the first example above, Company will be used as chart dimension until a single company is selected. The
chart will then show Department . If a single department is selected, the chart will switch to Employee.
As selections are reverted, so that more than one value becomes possible in the upper fields of the group's
field list, the chart is automatically drilled back up.
Drill-up
The drill-up function is available in bar charts, pie charts, and line charts. Other visualizations reflect the
changes made in the charts, but cannot themselves be used to drill up through the different dimensions.
When you drill down in a dimension group, breadcrumbs provide links back to the previous dimensions. Click
the dimension that you want to drill up to.
In the following bar chart, the breadcrumbs Year > Quarter > Month enable drilling up.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 70
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 71/88
6 Dimensions
6.3 Calculated dimensions
You can use expressions to create calculated dimensions. A calculated dimension consists of an expression
involving one or more fields. All standard functions may be used.
For performance reasons, it is recommended to perform all calculations in the data load editor.
When dimensions are calculated in the chart, Qlik Sense first calculates the dimension values,
and then aggregates the measures for these calculated values, which affects the performance
more than calculations in the load script.
There are cases when calculated dimensions are powerful in data analysis, for example, if you want to
generate the dimensions values during analysis, when dimension values are dependent on the selections.
Calculated dimensions are also useful if you want to modify a field.
Once you have created a calculated dimension, you can use it as any other dimension.
Example:
You have a field called Calendar Month that includes each of the months of the year. In your app, you want
include a table that shows the sales for each of the first 6 months of the year. For the rest of the months, you
want to see a total. You can use an expression to create this calculated dimension.
Syntax:
If ([Calendar Month] <7, [Calendar Month], 'Rest')
Concepts in Qlik Sense - Qlik Sense, 2.0.1 71
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 72/88
7 Measures
7 MeasuresMeasures are calculations used in visualizations, typically represented on the y-axis of a bar chart or a column
in a table. Measures are created from an expression composed of aggregation functions, such as Sum or Max, combined with one or several fields.
A measure must have a name, and may also be supplied with descriptive data such as description and tags.
Example:
You can, for example, create a bar chart to visualize the cost of each type, by adding the Product Type
dimension to the chart, and the measure Cost , which is made from the expression Sum(Cost), that is the
result of the calculation of the aggregation function Sum over the fieldCost. The results are grouped by the
Product Type dimension.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 72
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 73/88
8 Smart search
8 Smart searchSmart search is the global search tool in Qlik Sense. Smart search is available when you are analyzing data
on a sheet and it is located in the selections bar. Smart search helps you to find associations and makeselections in your data. Open it by clickingF.
If you perform a search with two search terms, the search generates one search query including both of them
and then displays the available combination of results, with one result per row. In the screenshot you can see
an example where the categories Product Type, Product Sub Group, and Customer show the available
results from the database.
A Search field
B Suggested search strings
C Search results
Concepts in Qlik Sense - Qlik Sense, 2.0.1 73
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 74/88
9 List search
9 List searchList search makes it easier for you to find or filter in filter panes, selection items, and tables, and make
selections in the resulting list.
Special conditions apply to smart search that is available in the selections bar.
9.1 Text search
As you type your search string, Qlik Sense filters the field values and displays the matching items. If you
perform a normal search (without wildcards), strings that match the search string are displayed. If you use
several strings, separated by blanks, each of these is interpreted as a separate search string and displays all
field values that contain either of the strings. If you want the separate search strings to be interpreted as onlyone string, use quotation marks (" ") to link the strings together. You can also use a plus sign (+) for a similar
result. By using a plus sign, you set the condition that strings with a plus sign must be included in the
matching items. However, the strings need not necessarily be next to each other, nor in the same order as
they were entered.
Search is not case sensitive.
Example Result
"orange juice"
Only finds field values that contain the whole string “orange juice”.
orange juice Without the quotation marks, all fields that contain either “orange” or “juice” would be
displayed.
+orange
+juice
Finds matches such as “orange juice”, “orange and apple juice” and “juice from oranges”
9.2 Wildcards
You can use one or several wildcards in a search string. The following wildcards can be used:
Wildcard Representation
* Zero or more characters, including blank. Thiswildcard isflexible and matches any
character or any block of characters in a specific position.
? A single character, including blank. This wildcard is useful when you suspect that a string
may be misspelled, when you are unsure of the spelling, or when the string contains
special characters that may be difficult to reproduce correctly.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 74
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 75/88
9 List search
If you use wildcards, only those records that match the entire search string are displayed, that
is, a blank does not imply a logical OR. The search string '*creamed' does not get a match on
"Rocky's creamed corn" since the value does not end with “creamed”. Neither does “creamed*”
result in a match on "Rocky's creamed corn", since the value does not start with “creamed”
Example Result
a* Finds all values that begin with the letter “a”, including strings with several words where
the first word begins with an “a”.
*b Finds all values that end with the letter “b”, including strings with several words where the
last word ends with a “b”.
*c* Finds all values that contain the letter “c”, including strings with several words.
r?ck Finds all values that have four letters and start with an “r”, followed by any character, andending with “ck”, for example, “rack”, “rick”, “rock”, and “ruck”.
r?? ????d Finds all values that consist of a three-letter word beginning with an “r” and a five-letter
word ending with a “d”.
Space in a search string makes a difference. If you search for “*corn” you get matches on
strings ending with, for example, “popcorn” as well as “corn”. If you use a space in your search
string, “* corn”, you only get matches that end with “corn”.
9.3 Fuzzy search
Fuzzy search is similar to a text search, with the difference that it compares and sorts all field values
according to their degree of resemblance to the search string. Fuzzy search is especially useful when items
may be misspelled. Fuzzy search can also help you find multiple values that are nearly identical.
Begin your search string with a tilde "~" character. While typing, all values are sorted by the degree of
resemblance to the search string, with the best matches at the top of the list. If you press Enter, the first
value in the list is selected.
9.4 Numeric search
Numeric search is very similar to text search. The only difference is that the search string must begin with one
of the relational operators ">", " >=", "< " or "<=".
Example Result
>900 Finds all values greater than 900.
<=900 Finds all values less than or equal to 900.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 75
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 76/88
9 List search
>900<1000 Finds all values greater than 900 and less than 1000.
<900>1000 Finds all values less than 900 or greater than 1000.
9.5 Expression search
An expression search always begins with an equals sign (=). The expression is evaluated for each field value
in the search field. All values for which the search expression returns a non-zero value are selected.
In a filter pane with Sales values, you can use a search such as: =Sum(Sales) > 1000000 to find values larger
than 1,000,000. This is a simple search and you could get the same result by using the numeric search:
>1000000 . Often, an expression search is the only choice. For example, if you want to search for values in
associated fields, you have to use an expression search.
Example:
Let us assume that you have a filter pane for sales representatives. You can then use an expression search
for the sales representatives who have sales larger than, for example, 5,000,000. The search string is similar
to the previous one: =Sum(Sales) > 50000000 . Because the sales values are associated with the sales
representatives, you can perform the search in the Sales Rep filter pane.
Sales representatives with sales larger than 5,000,000
Concepts in Qlik Sense - Qlik Sense, 2.0.1 76
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 77/88
10 Bookmarks
10 BookmarksYou can add bookmarks to save your selections and a particular location. The bookmarks can later on be
opened to restore the selections to a former state. When you use the bookmark, you arrive at the sheet youwere exploring when you created the bookmark. All bookmark tools are reached with> in the toolbar.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 77
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 78/88
11 Streams
11 StreamsThe content in the hub is organized in streams. A stream is a collection of apps that a group of users has
specific access to. The users of the stream can have different access rights. Some users might only be ableto read the content in the stream, while others might have the rights to publish their content to the stream.
By default, Qlik Sense includes a stream called Everyone, which all users have both read and publish rights
to.
An app can only be published to one stream. To be able to publish an app to another stream the
app must first be copied and then published to the second stream.
In this example there are different departments within a company. All users within all departments have bothread and publish rights in the stream Everyone.
Only users who belong to the finance department have access to the stream Finance. Some of the users have
both publish and read rights and some only have read rights.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 78
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 79/88
12 Publishing
12 Publishing Apps including sheets and stories can be published to streams. Additional sheets and stories can be
published as a part of an app that is already published. Access rights control which users are allowed topublish different kinds of content.
12.1 Publishing apps
When you publish an app, the sheets and stories of the app will become available to the other users that have
access to the stream that your published app belongs to.
When your app is published, it will be locked. This means that others will not be able to edit your published
sheets and stories, but can use them to analyze the data.
No one can edit the sheets and stories that were published with the app, but if you have the correct accessrights, you can add private sheets and stories to a published app. You can use a published sheet or story as a
template of a new one, by duplicating.
The image below illustrates how the state of a sheet can change in relation to a published app. It works
identically for stories.
When an app is published, only the master items and charts will be available, in the library panel, when
editing your private sheets.
Apps are published from the Qlik Management Console.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 79
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 80/88
12 Publishing
12.2 Publishing sheets and stories
The private sheets and stories that you create as a part of a published app can be published, to be made
available to all other users of the published app.
When working with a published app, sheets and stories are organized in sections in the app overview
depending on their status.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 80
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 81/88
12 Publishing
Base sheets
/ Base
stories
Sheets and stories that were included in the app when it was published. All users of the
app have access to these.
Publishedby me
Sheets and stories that you have created and then published so that all the users of theapp can access them. The other users will find these in their Community section.
My sheets /
My stories
Sheets and stories that you have created but not published. No one else can see these.
Community Sheets and stories that someone else has created and published to the app that you have
access to.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 81
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 82/88
13 Authorization and access
13 Authorization and accessWhat you can see and do in Qlik Sense depends on what access rights your Qlik Sense system administrator
has granted you. The access control includes controlling user authorization, setting up permissions andresources (for apps, sheets, and so on) but does not control what data you have access to.
Qlik Sense has a default behavior, for example:
l Only the owner of an unpublished app can see it.
l An app cannot be modified once it has been published.
l Only users with access to a stream can see the apps in that stream.
This means that you can see some parts of the user interface or perform some actions only when the app is in
a specific state or when access has been granted to you.
Your Qlik Sense system administrator controls authorization and access to make Qlik Sense behave in a
particular way. This is configured in the Qlik Management Console.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 82
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 83/88
14 More concepts
14 More conceptsOnce you have learned about the fundamental concepts in Qlik Sense you can move on to read about more
concepts for advanced features.
14.1 Data model
When you have loaded your data into Qlik Sense, you need to look at how the data is structured and arrange
it to mirror the kind of data model you want to achieve.
Your goal should be to create a data model that enables efficient handling of the data in Qlik Sense. Usually
this means that you should aim for a reasonably normalized star schema or snowflake schema without any
circular references, that is, a model where each entity is kept in a separate table. In other words a typical data
model would look like this:
l a central fact table containing keys to the dimensions and the numbers used to calculate measures
(such as number of units, sales amounts, and budget amounts).
l surrounding tables containing the dimensions with all their attributes (such as products, customers,
categories, calendar, and suppliers) .
In many cases it is possible to solve a task, for example aggregations, either by building a
richer data model in the load script, or by performing the aggregations in the chart expressions.
As a general rule, you will experience better performance if you keep data transformations in
the load script.
It's good practice to sketch out your data model on paper. This will help you by providing
structure to what data to extract, and which transformations to perform.
14.2 Data load script
Qlik Sense uses a data load script, which is managed in the data load editor, to connect to and retrieve data
from various data sources. In the script, the fields and tables to load are specified. It is also possible to
manipulate the data structure by using script statements and expressions.
During the data load, Qlik Sense identifies common fields from different tables (key fields) to associate the
data. The resulting data structure of the data in the app can be monitored in the data model viewer. Changes
to the data structure can be achieved by renaming fields to obtain different associations between tables.
After the data has been loaded into Qlik Sense, it is stored in the app. The app is the heart of the program's
functionality and it is characterized by the unrestricted manner in which data is associated, its large number of
possible dimensions, its speed of analysis and its compact size. The app is held in RAM when it is open.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 83
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 84/88
14 More concepts
14.3 Variables
A variable in Qlik Sense is a container storing a static value or a calculation, for example a numeric or
alphanumeric value. When you use the variable in the app, any change made to the variable is applied
everywhere the variable is used. Variables are defined in the script using the data load editor, where thevariable acquires its value from a Let, Set or other control statements in the data load script.
When using variables in expressions, you can change the expression used in a range of charts
simultaneously simply by editing the variable.
14.4 Fields
Fields hold the data that is used in Qlik Sense. Fields can be thought of as the data loaded from the load
script. Fields contain one or more values, called field values, and at the basic level, correspond to columns in
a database table, but can also exist in more than one table. Field values consists of numeric or alphanumeric
data. When loaded from the load script, fields can be represented as a table visualization.
Example of data in a load script:
Temp:
LOAD * inline [
Customer Product UnitSales UnitPrice
Imagine Film 4 16
Imagine Film 10 15
Imagine Shutter 9 9
PhotoInc Shutter 5 10
PhotoInc Lens 2 20
PhotoInc Magnifier 4 25
Gallery Film 8 15
Gallery Lens 7 19
] (delimiter is ' ');
The fields represented in a data model table after having loaded the data:
The same fields as columns in a table visualization on a sheet:
Concepts in Qlik Sense - Qlik Sense, 2.0.1 84
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 85/88
14 More concepts
14.5 Date & time fields
If you are working with fields containing date or timestamp information in your app, you can define a number of related attributes of a date, for example, year or hour, as derived fields and use them in your visualization.
You need to create a calendar template where you define which fields to derive in the data load script. The
derived date & time fields will be generated when the script is run and data is reloaded.
The date & time fields that have been generated appear in the assets panel. You can use them in
visualizations, just like any other data field.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 85
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 86/88
14 More concepts
14.6 Functions
A function is a type of procedure or routine that performs a specific task on data in apps. Qlik Sense provides
several hundred functions that can be used for various purposes, such as: to perform calculations, interpret
data or system information, determine conditions, and so on.
Many functions can be used both in the data load editor and in visualizations. Some functions are specific to
visualizations (chart functions), and others are specific to the data load editor (script functions).
Functions are often, but not always, used in expressions.
The following list shows some examples of functions:
l Max: an aggregation function that can be used in scripts and charts.
For example: Max(Sales) calculates the highest value in the field Sales.
l IF: a conditional function that can be used in scripts and charts.
For example: IF(Amount>0, 'OK','Alarm') determines if the condition 'is the value of Amount
greater than zero?' is met. If it is, OK is written, otherwise Alarm is written.
l Date#: an interpretation function that can be used in scripts and charts.
For example Date#(A) takes the input value A and evaluates it as a date.
For detailed reference regarding script functions and chart functions, see the Script Syntax and
Chart Functions Guide.
14.7 Expressions An expression is a combination of fields, variables, operators, functions, numbers, and mathematical
symbols put together according to a special syntax in order to calculate a value. Expressions are used both in
scripts and in chart visualizations. They can be simple, involving only basic calculations, or complex, involving
functions fields and operators.
In a script, an expression is evaluated as the script execution passes it by. In visualizations (including charts
and tables), expressions are evaluated automatically whenever any of the fields, variables or functions that
the expression contains change value or logical status.
Expressions can be used in several different situations. The difference between measures and expressions is
that expressions have no name or descriptive data.
A few differences exist between script expressions and chart expressions in terms of syntax
and available functions.
For detailed reference regarding script functions and chart functions, see the Script Syntax and
Chart Functions Guide.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 86
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 87/88
14 More concepts
14.8 Master items
Master items are reusable assets such as visualizations, dimensions and measures that you can use
throughout your app. You create and use master items to apply global changes to your visualizations,
dimensions and measures.
Master items are very useful, you can use, for example, a master dimension in as many of your visualizations
as you like and maintain it in just one place. Any updates you make to the master item will be applied
everywhere the master item is used.
14.9 Story
In data storytelling, you use a story to collect and present insights and ideas to your audience. A story is
presented as a timeline with one or more slides, and can be based on traditional data storytelling structures
(such as a three-act play, hero’s journey, and so on).
Stories are contained within an app. As there is a connection from a story to its app it is possible for you to
access the live data to discover new and hidden stories.
To build a story you use time-based snapshots of your data visualizations and embedded sheets and place
them on the story’s timeline.
You can, for instance add text and shapes, put emphasis on certain insights with visual effects, apply styling,
and so on, to make the story compelling and engaging, and its purpose very clear.
14.10 Snapshot
A snapshot is a graphical representation of the state (type and data) of a data object at a certain point in time
that you can use when you build stories. The snapshot you take is a copy of the state. This means that the
state of the snapshot does not change when the state of the corresponding data object gets updated.
Snapshots capture individual objects on a sheet during the analysis process. They store the visualization and
data as you see it at that time enabling you to use them at a later point in time to tell a story. Each snapshot
contains a bookmark back to the original context so that you quickly get access to the live data.
A snapshot's state and selections will not be updated at a data reload. It will always reflect the
data that existed at the point in time the snapshot was taken.
14.11 Embedded sheet
If you use embedded sheets in a story you can make selections in the embedded sheets, while playing the
story. This means that you can show your insights for your audience by making selections, without going to
the app itself.
When you play a story you can make and reset selections in the embedded sheets just as you can in a sheet,
in sheet view.
Concepts in Qlik Sense - Qlik Sense, 2.0.1 87
7/24/2019 Concepts in Qlik Sense
http://slidepdf.com/reader/full/concepts-in-qlik-sense 88/88
14 More concepts
14.12 Direct Discovery
The Direct Discovery capability in Qlik Sense expands the potential use cases for Business Discovery,
enabling business users to conduct associative analysis on larger data sources. It provides the complete
associative experience of Qlik Sense on top of data coming directly from larger external data sources, andenables users to combine that big data with data stored in memory. With Direct Discovery, you can leverage
any data useful for analysis without scalability limitations.
The Direct Discovery capability combines the associative capabilities of Qlik Sense in-memory data set with a
query model where not all of the source data is directly loaded into the Qlik Sense data model. The
aggregated query result is passed back to user interface so the Direct Discovery data set is part of the
associative experience. You can navigate both on the in-memory data and the Direct Discovery data as a
unified set.
You can create visualizations to analyze data from the combined data sets, make selections in either of the
in-memory or Direct Discovery data, and see associations across them with the same characteristic QlikSense colours; green, white, and grey.
In order to use Direct Discovery in Qlik Sense, you must use special functions in the data load script. The way
you create visualizations from Direct Discovery fields differs somewhat from working with other data sources,
and since all the data is not kept in-memory, there may be performance issues when large amounts of data
are retrieved.